LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Re: Fwd: (ASSEM) Wave soldering SOT-23

Tue, 10 Dec 1996 16:41:59 -0500

Tue, 10 Dec 96 15:19:08

Re: Fwd: (ASSEM) Wave soldering SOT-23

Tue, 10 Dec 96 15:54:08

Thu, 12 Dec 96 11:20:24 +0100

Re[2]: (ASSEM) Wave soldering SOT-23

Thu, 12 Dec 1996 08:11:42 -0500

Thu, 12 Dec 96 07:27:48

FW: (ASSEM) Wave soldering SOT-23

Thu, 12 Dec 96 17:16:26 +0100

Re: (Fwd) Re: Military Polyimide Board Failures-EDN

Sun, 15 Dec 1996 08:37:20 -0500

(FAB) Fine Line Imaging

Fri, 1 Nov 1996 17:08:59 -0500

Mon, 01 Apr 96 10:16:16 PST

(Fwd) Re: Wave Solder SPC

Tue, 19 Nov 1996 14:42:05 +0000

Re: (no subject)

Mon, 6 May 1996 06:46:57 -0400

(no subject)

Thu, 12 Sep 1996 22:00:10 -0700

(U)

Fri, 19 Apr 96 10:48:19 EDT

Re: -D Circuit Boards (Vendor wanted)

Tue, 6 Aug 1996 17:07:51 -0400

...no subject...

Thu, 23 May 96 14:35:31 PDT

2-up panels.

Tue, 27 Feb 96 13:25:40 -0100

2nd hand EX200 drill router

Mon, 21 Oct 1996 07:08:53 EDT

Re: 4 vs 6 layer

Mon, 8 Jul 1996 14:45:30 -0400

Re[2]: 4-layer vs 6-layer

Mon, 01 Jul 96 07:28:03 EST

Re: 8 inch Floppies

Thu, 22 Feb 1996 11:43:04 -0500

8 inch Floppies

Fri, 23 Feb 96 10:21:04 -0800

Re: ;-) Hadco + Zycon

Wed, 11 Dec 96 18:02:14 EST

Re: ;-) Hadco + Zycon

Thu, 12 Dec 1996 08:11:44 -0500

31 July 96, 07:04:39 EDT

Thu, 01 Aug 1996 11:25:45 -0600

Mon, 26 Feb 1996 16:24:35 -0500

Thu, 09 May 96 13:10:01 EDT

Re: Acronyms

Tue, 02 Apr 96 10:21:27 PST

Re: Acronyms

Wed, 3 Apr 1996 14:43:50 -0500

Re: Acronyms

Sat, 6 Apr 1996 14:30:32 -0500

Re: Acronyms-CAF

Tue, 02 Apr 96 09:01:42 PST

Additive technology

Thu, 15 Feb 1996 11:08:19 -0500

Re: Additive technology

Sun, 18 Feb 1996 13:19:05 -0500

Adhesive query

Thu, 18 Apr 1996 12:03:23 -0400 (EDT)

Re: Adhesive query

Thu, 18 Apr 96 10:34:39 PST

Re: adhesives

Wed, 11 Dec 1996 07:33:29 -0500

Adipic acid

Tue, 1 Oct 96 17:08:53 +0200

Re: Adipic acid

Tue, 01 Oct 96 10:21:40 PST

Re: Adipic acid

Wed, 2 Oct 1996 13:31:07 -0400

ADM: SWOT Analysis

Wed, 17 Jul 1996 11:57:54 -0500

Re: ADMIN: Poll Results on Splitting TechNet

Thu, 29 Feb 1996 11:19 -0500 (EST)

Re: ADMIN: Sales postings / A...

Wed, 8 May 1996 13:38:05 -0400

Tue, 7 May 1996 09:46:44 -0400

Tue, 07 May 96 09:30:31 CST

Tue, 07 May 96 09:56:34 CST

Re: ADMIN: Sales postings / Advertisements -Reply

Wed, 8 May 1996 10:09:48 -0400

Tue, 07 May 1996 10:27:43 -0700

Re[2]: ADMIN: Sales postings / Advertisements -Reply -Last R

Tue, 07 May 96 14:52:16 CST

Re: ADMIN: Sales postings / Advertisements -Reply -Last Reply

Tue, 7 May 1996 13:10:58 -0400

ADMIN: TechNet Digest list: What is that?

Mon, 5 Aug 1996 11:31:05 -0500 (CDT)

ADMIN: Using IPC mail lists:

Wed, 31 Jul 1996 11:57:10 -0500 (CDT)

ADMIN: Using IPC mail lists:

Wed, 31 Jul 1996 11:57:10 -0500 (CDT)

ADMIN: Using IPC mail lists:

Wed, 31 Jul 1996 11:57:10 -0500 (CDT)

ADMIN: We are back

Fri, 19 Jul 1996 13:04:10 -0500 (CDT)

Re: ADMIN:RE:Sales postings / Advertisements

Tue, 7 May 1996 17:15:09 -0400

Advise CTM

Mon, 8 Jan 1996 11:57:47 -0500

AGEING OF ELECTROLESS NI/IMMERSION AU FINISH

Tue, 2 Jan 96 16:53:27 PST

Re: AGEING OF ELECTROLESS NI/IMMERSION AU FINISH

Wed, 3 Jan 1996 23:39:36 -0500

Re: Air Emissions from Printed Circuit Manufacturing

Wed, 10 Apr 1996 21:39:42 -0400

Air flow across solder joints

Fri, 26 Jul 1996 17:16:12 -0400

Tue, 16 Apr 96 17:32:10 PST

Tue, 16 Apr 1996 20:38:32 -0400

Tue, 16 Apr 96 16:25:28 PST

Alloy 42 TSOP Solder Joint Cracks

Tue, 23 Apr 96 10:57:01 EST

Fri, 11 Oct 96 14:17:35 EDT

ALPHA POLYSOLDER LT

Mon, 11 Nov 96 12:46:35 PST

Alpha Preq

Mon, 23 Dec 1996 11:47:21 -0500

Re: Alternative Solder Masks

Mon, 28 Oct 96 10:15:59 PST

Re: Alternatives to Bromine in Flame Retardants

Sat, 20 Jan 1996 11:14:01 -0500

Aluminum Oxide Scrubbing

Thu, 08 Feb 96 16:29:42 EST

Re: Ammoniacal Etching Speed

Thu, 11 Jul 1996 09:52:12 -0400

RE:Annular ring breakout

Thu, 18 Apr 1996 11:27:42 -0400

Re[2]: Annular ring breakout

Thu, 18 Apr 96 14:41:10 EST

Another passing

Wed, 28 Aug 1996 10:27:58 -0400

ANSI-J

Tue, 22 Oct 96 09:21:04 PST

Re: ANSI-J

Thu, 24 Oct 1996 11:28:10 -0400

ANSI/IPC-A-6700D

Wed, 21 Feb 96 12:36:13 EST

re: APPLICATION OF ADHESIVE DOTS

31 JUL 96 13:07:20 EDT

Re: application of adhesive dots

Thu, 1 Aug 1996 13:44:20 -0700

AQP

Mon, 12 Feb 1996 09:20:48 -0600

Arrgh Oh No did some one up AOL BTW this is not a specific PCB topic!

Tue, 10 Dec 96 19:43 WET

ASM: 610B / 2000A Comparison

Tue, 9 Jul 1996 09:04:04 +0000

Re: ASM: 610B / 2000A Comparison

Wed, 10 Jul 1996 10:33:11 +0000

Re: ASM: 610B / 2000A Comparison

Thu, 11 Jul 96 09:34:45 EDT

ASM: Exposed copper on component leads

Thu, 15 Aug 1996 10:14:46 -0500

ASM: Flexibility Testing

Wed, 11 Sep 96 10:58:54 EDT

ASM: Flexibility Testing

Wed, 11 Sep 96 13:29:21 EDT

ASM: Parylene Conformal Coating

Mon, 9 Sep 96 08:47:04 EDT

ASM: RTV

Tue, 15 Oct 96 13:45:17 EDT

ASM: SMT pads with vias.

Fri, 07 Jun 96 16:15:28 PST

Re: ASS- X S Solder on SOT-23

Wed, 01 May 96 17:34:02 PST

Ass. BGA shape

Tue, 19 Nov 96 15:34: 0 PST

Re: ASS: Green Contamination

Mon, 11 Nov 1996 09:57:18 -0500

Re: ASS: SIR tests

Wed, 18 Dec 1996 11:32:05 -0500

Re: ASS: Socket temperature performance

Tue, 14 May 1996 08:57 -0500 (EST)

Re: ASS: Socket temperature performance

Tue, 14 May 96 09:47:17 EDT

Re: Ass: Soldermask problem!

Wed, 14 Aug 1996 17:43:27 -0400

re: ASS: Storeage of PWB

Tue, 14 May 96 9:10:59 PDT

ASS: Storeage of PWB -Reply

Wed, 15 May 1996 12:03:44 -0400

Re[2]: ASSEM: Component attrition during placem

Tue, 24 Dec 96 11:41:57

re: ASSEM:NI/GOLD

Tue, 17 Dec 96 16:50:48 PST

Re: ASSEM:NI/GOLD

Tue, 17 Dec 96 16:32:45

ASSEM:NI/GOLD

Wed, 18 Dec 1996 04:02:01 EST

ASSEM:NI/GOLD

Wed, 18 Dec 96 12:54:40 +0100

Re: ASSEM:NI/GOLD

Wed, 18 Dec 1996 16:13:08 -0500

Re: ASSEM:Router

Wed, 18 Dec 96 17:11:49

Assembly

Tue, 30 Jul 96 15:47:42 EDT

Assembly - OSP? Clarification.

Thu, 20 Jun 96 15:07:48 PST

Re: assembly - pressfit connections

Wed, 19 Jun 96 17:38:04 EST

Assembly: OSP and Bake.

Tue, 18 Jun 96 16:22:28 PST

Re: Assembly: OSP and Bake.

Wed, 19 Jun 1996 00:32:55 -0400

Re: Assembly: Silver PWA Finishes

Thu, 11 Jul 96 11:41:23 EST

Re: Assembly: Solder Paste Life Extension

Wed, 17 Apr 1996 11:45 -0500 (EST)

ASSEMBLY:solder paste stencils

Thu, 18 Jul 96 15:01:04 PST

Re: Assisted visual inspection of fine-pitch solder connec

Mon, 9 Dec 96 09:49:50 +0800

Re: Assisted visual inspection of fine-pitch solder connecti

Fri, 06 Dec 96 15:47:59 PST

assly:baking of hasl pcbs

23 Oct 96 15:33 GMT+0500

RE: Re: assly:baking of hasl pcbs (#994327)

Wed, 23 OCT 96 08:30:00 MDT

Re: assly:baking of hasl pcbs (#994327)

Thu, 24 Oct 1996 11:28:15 -0400

assly:stencil aperture size for 20 mil pitch component

21 Nov 96 17:52 GMT+0500

assly:stencil aperture size for 20 mil pitch component

Thu, 21 Nov 96 09:46:18 EST

assly:stencil aperture size for 20 mil pitch component

21 Nov 96 17:52 GMT+0500

assly:stencil aperture size for 20 mil pitch component

21 Nov 96 17:52 GMT+0500

ASSLY:X-OUT PROBLEM IN PANELS

15 Nov 96 18:52 GMT+0500

Fri, 20 Dec 96 08:19:43 PST

Fri, 20 Dec 96 10:33:38 EST

Fri, 20 Dec 96 08:46:51

Fri, 20 Dec 1996 14:10:27 -0500

Fri, 15 Mar 1996 10:24:20 -0500

Fri, 15 Mar 1996 21:39:25 -0500

ASSY - Padless Plated Thru Holes

Mon, 18 Mar 1996 09:03:45 -0500

Re[2]: ASSY

Thu, 21 Mar 96 12:20:23 EST

Re[2]: ASSY

Tue, 06 Aug 96 11:45:14 PST

Wed, 13 Nov 96 08:04:35 -0500

Re: ASSY - Padless Plated Thru Holes

Wed, 13 Nov 1996 12:12:17 -0500

Re: ASSY - Padless Plated Thru Holes

Wed, 13 Nov 1996 13:14:38 -0500

ASSY : Hot Bar Reflow

Fri, 7 Jun 1996 17:02:00 +0000

ASSY : LowHighProfile

Fri, 19 Jul 1996 12:41:00 +0000

Re: ASSY : LowHighProfile

Fri, 19 Jul 1996 16:25:48 -0400

Re: ASSY : LowHighProfile

Mon, 22 Jul 96 09:04:11 +0800

ASSY : Marking On Nickel/Gold

Fri, 10 May 96 19:27:18 +0800

Re: ASSY : Marking On Nickel/Gold

Fri, 10 May 96 12:31:36 PST

Re: ASSY : paste printing

Thu, 17 Oct 1996 10:23:19 -0400

Re: ASSY Circuits Assembly

Thu, 6 Jun 1996 12:05:09 -0400

ASSY cleaning.

Thu, 30 May 96 07:54:36 +0100

ASSY ink marking

Tue, 21 May 96 10:30:01 +0100

ASSY light guided assembly.

Tue, 25 Jun 96 14:51:43 +0100

ASSY minimum fillet height.

Thu, 21 Mar 96 15:11:41 -0100

re: ASSY Moisture Release Rates and Prebake Parameters

26 SEP 96 15:23:18 EDT

ASSY non-rosin flux and MIL

Wed, 08 May 96 10:59:42 +0100

Re: ASSY non-rosin flux and MIL

Wed, 8 May 1996 16:10:25 -0400

RE: ASSY Omegameter 600SMD

Mon, 13 May 96 22:32:25 EDT

Re: ASSY Omegameter 600SMD

Tue, 14 May 1996 09:33:58 -0400

ASSY post reflow cleaning

Thu, 18 Apr 96 09:29:58 -0100

ASSY post-reflow cleaning

Thu, 11 Apr 96 13:19:05 -0100

Re: ASSY post-reflow cleaning

Thu, 11 Apr 1996 17:31:48 -0400

ASSY Qualifying reflow solder process

Thu, 11 Apr 96 13:20:23 -0100

Re: ASSY Qualifying reflow solder process

Thu, 11 Apr 1996 17:31:31 -0400

ASSY reflow profile expert software.

Tue, 18 Jun 96 13:56:29 +0100

ASSY UNactivated R-fluxed solder paste

Thu, 21 Mar 96 15:12:42 -0100

Re[2]: Assy, training

Thu, 23 May 96 19:23:50 CST

RE:Assy, training

Fri, 24 May 1996 08:13:52 -0400

Re: ASSY- Laser Ash?

Fri, 7 Jun 96 12:00:04 +0800

Re: Assy-Fiducials

Fri, 27 Sep 1996 13:37:31 -0400

ASSY-Flagging

Fri, 10 May 1996 11:29:00 +0000

Fri, 10 May 96 13:59:45 EDT

Fri, 10 May 96 13:19:55 PST

ASSY-Flagging

Mon, 13 May 1996 12:53:00 +0000

Tue, 14 May 1996 17:51:33 -0400

Re: ASSY/DES: RWE connector

Wed, 15 May 96 17:01:53 PST

Re: ASSY-Metal Stamping

Thu, 30 May 1996 14:25:46 -0400

ASSY.

Tue, 28 May 96 08:24:28 +0100

ASSY.

Tue, 28 May 96 08:25:33 +0100

ASSY. Solder joint temp

Wed, 20 Nov 96 16:46:59 PST

Tue, 03 Dec 1996 14:07 -0500 (EST)

Assy/Fab Grn Rst-Gold

Thu, 23 May 1996 18:01:31 -0400

Re[3]: Assy/Fab: PCB Thickness

Mon, 3 Jun 1996 14:16:39 -0400

Re: Assy/Fab: PCB Thickness

Mon, 3 Jun 1996 16:37:23 -0400

RE: Assy/Fab: PCB Thickness

Mon, 03 Jun 96 23:01:27 EST

ASSY/FAB: SnPb Oxidation

Mon, 18 Nov 1996 09:23:37 -0600

Re: ASSY/FAB: SnPb Oxidation, Removal

Tue, 19 Nov 1996 00:07:51 -0500

Re: ASSY/FAB: SnPb Oxidation, Removal

19 Nov 1996 08:29:17 CST

Re: ASSY/FAB: SnPb Oxidation, Removal

Tue, 19 Nov 1996 10:17:37 -0500

Re[2]: ASSY:

Tue, 14 May 96 11:09:03 CST

Re: ASSY:

Thu, 16 May 1996 11:11:30 -0400

Re[2]: ASSY: "Off-the-Shelf" Enclosures

Mon, 03 Jun 1996 08:00 -0500 (EST)

RE: ASSY: 0402 chip placement (#570929)

Wed, 9 OCT 96 11:09:54 MDT

ASSY: 3D Visual Inspection Request

Mon, 9 Dec 1996 10:21:31 -0600

ASSY: Accelerated Aging Equations

Thu, 25 Jul 1996 10:08:47 -0400

ASSY: adhesive

Wed, 10 Apr 96 10:42:52 PDT

Re: ASSY: adhesive

Thu, 11 Apr 1996 07:20 -0500 (EST)

Re: ASSY: adhesive

Thu, 11 Apr 1996 11:00:25 -0400

Re: ASSY: ADHESIVE SCREEN CLEANING

Wed, 16 Oct 1996 19:56:27 -0400

ASSY: Affect of Sulfur on Gold or Silver Platings

Wed, 20 Mar 1996 14:42 -0500 (EST)

Re: ASSY: Affect of Sulfur on Gold or Silver Platings

Thu, 21 Mar 1996 09:51:58 -0500

Re: ASSY: Area Calc. for Ionic Contamination

Mon, 25 Mar 1996 14:36:16 -0500

RE: ASSY: Area Calc. for Ionic Contamination

Mon, 25 Mar 96 20:49:23 EST

Re[2]: ASSY: Baking before wave soldering

Mon, 24 Jun 96 20:40:06 PST

ASSY: Board Flatness Spec

Mon, 26 Aug 96 22:25:24 EDT

Re: ASSY: Bottom side Adhesives

Tue, 10 Dec 96 13:09:20

ASSY: calculation of accelerated aging factor

Tue, 9 Jul 96 8:37:02 PDT

Wed, 10 Jul 1996 10:03:44 -0400

Thu, 11 Jul 1996 10:24:36 -0400

Thu, 11 Jul 96 15:07:57 EDT

re: Re: ASSY: calculation of accelerated aging factor

Thu, 11 Jul 96 14:28:15 PDT

Thu, 11 Jul 96 16:54:51 PDT

ASSY: calculation of accelerating aging factor

Wed, 10 Jul 96 13:38:55 PDT

ASSY: Chip under PLCC-44

Wed, 30 Oct 1996 16:48:36 -0600

Assy: Cleaning solder pot

Fri, 13 Dec 96 08:27:10 +0100

Re: Assy: Cleaning solder pot

Mon, 16 Dec 1996 14:51:51 -0500

ASSY: Conductor Width to Land Ratio

Fri, 15 Nov 1996 13:33:53 -0600

Re: Assy: conformal coating

Tue, 24 Sep 96 13:45:01 EDT

Re: Assy: conformal coating

Wed, 25 Sep 1996 11:31:23 -0400

ASSY: Conformal Coating Flammability Problems

Wed, 27 Nov 1996 08:51:40

Re: ASSY: Conformal Coating Flammability Problems

Wed, 27 Nov 1996 14:21:06 -0500

Re: ASSY: Conformal Coating NoClean PWB's

Mon, 28 Oct 96 10:14:07 PST

Re: ASSY: Cu Ni Sn board finishes

Mon, 12 Aug 1996 09:37:00 -0400

ASSY: De-panelizer

Thu, 21 Nov 1996 14:02:30 -0600

Re: ASSY: Depanelization of SMT Board Assys

Thu, 25 Apr 1996 16:04:21 -0400

Re: assy: Dross elimination

Wed, 14 Aug 96 15:03:32 PST

RE: assy: Dross elimination (#943028)

Thu, 15 AUG 96 10:40:40 MDT

FWD: RE: assy: Dross elimination (#943028)

Thu, 15 AUG 96 16:50:48 MDT

Re: ASSY: Dry film mask and paste thickness -Reply

Thu, 18 Apr 1996 12:50:00 +1000 (EST)

ASSY: DSN: Conductor to Land ratio

Fri, 15 Nov 1996 09:38:49 -0600

RE: ASSY: Dual LED failures.

Tue, 7 May 96 16:28:33 CDT

Re: ASSY: Entek Coating

Mon, 12 Aug 1996 17:53:49 -0400

RE: ASSY: Entek Coating (#870153)

Mon, 12 AUG 96 15:18:03 MDT

ASSY: Equipment Suppliers

Mon, 11 Nov 1996 09:28:40 -0600

Re: ASSY: Equipment Suppliers

Mon, 11 Nov 1996 11:27:23 -0600

ASSY: Fiducials

Mon, 14 Oct 1996 09:11:33 -0500

RE: ASSY: Fiducials

Mon, 14 Oct 96 13:55: 9 edt

RE: ASSY: Fiducials

Tue, 15 Oct 1996 11:01:14 +0100

Re: ASSY: Fine Pitch Dewetting?

Thu, 25 Apr 1996 11:19:56 -0400

Re: FW: ASSY: Fine Pitch Dewetting?

Fri, 26 Apr 96 11:16:23 EST

ASSY: Fixturing for wave solder and in-line cleaning

Tue, 15 Oct 1996 17:16:13 -0600

Re: ASSY: GEN: Popcorning during reflow

Thu, 31 Oct 1996 19:18:05 -0500

re: ASSY: Gold contamination after wave soldering?

26 JUL 96 12:05:09 EDT

ASSY: Gold-to-Gold Soldering

Mon, 30 Sep 96 13:57:44 PST

ASSY: HASL plating uniformity

Thu, 2 May 96 11:37:55 PDT

Re[2]: ASSY: Heatsink Adhesives

Tue, 26 Nov 96 09:45:24 EST

Re: Assy: Ionograph & No-Clean Flux

Mon, 17 Jun 1996 14:35:39 -0400

Re: ASSY: IPC related question (component rotation)

Mon, 3 Jun 96 13:23:54 EDT

ASSY: J-Lead, PLCC-44

Tue, 29 Oct 1996 12:08:20 -0600

ASSY: J-Standards

Tue, 22 Oct 1996 16:29:07 -0500

Re: ASSY: J-Standards

Thu, 24 Oct 1996 11:28:13 -0400

ASSY: Job opportunity

Thu, 21 Mar 1996 18:18:45 +0500 (EST)

ASSY: Job Posting

Sat, 01 Mar 96 12:51:50 PST

Re: ASSY: Lead Trim After Wave

Fri, 15 Nov 1996 09:45:02 -0500

Re: ASSY: Lead Trim After Wave

Thu, 14 Nov 96 13:42:59 EST

Re: assy: matte or glossy soldermask?

Wed, 28 Aug 1996 16:33:48 -0400

Assy: max board width

Thu, 13 Jun 96 11:40:09 CST

ASSY: MDA and ICT Test

Wed, 9 Oct 1996 14:42:23 -0500

Thu, 05 Dec 96 19:23:23

Re[2]: ASSY: Menisograph Testers

Thu, 5 Dec 1996 23:56:28 -0500

Thu, 11 Jul 96 16:10:04 PST

Re[2]: ASSY: Moisture sensitivity?

Mon, 06 May 96 07:33:03 EST

RE: Re: Assy: No-clean Solder Paste w/o Nitrogen (#830576)

Wed, 20 NOV 96 09:02:41 MST

ASSY: OCC and Zn Mounting Screws

Tue, 4 Jun 96 14:22:34 -0700

Assy: opens after 2nd solder

Wed, 15 May 1996 16:46:40 -0400

Re: Assy: opens after 2nd solder

Thu, 16 May 1996 16:00:07 -0400

ASSY: Packaging Standards

Tue, 16 Jul 96 11:41:47

Re: ASSY: Packaging Standards

Fri, 19 Jul 96 12:55:37

Re: ASSY: Packaging Standards

Fri, 19 Jul 1996 16:23:29 -0400

Re[3]: ASSY: Packaging Standards

Tue, 23 Jul 96 09:41:59

ASSY: Passive Devices under PLCC-44

Wed, 30 Oct 1996 13:25:31 -0600

Re: ASSY: Paste In Hole

Thu, 7 Nov 1996 21:21:15 -0500

ASSY: PCMCIA Board Depanelizing

Wed, 09 Oct 96 07:58:36 EDT

Re: ASSY: PCMCIA Board Depanelizing

Wed, 9 Oct 96 13:41:54 -0700

RE: Assy: PCMCIA depaneling

Thu, 17 Oct 96 15:33:55 EST

ASSY: PCMCIA or PWA REFLOW CARRIERS

Thu, 10 Oct 96 07:56:31 EST

Re: ASSY: PCMCIA pallets

Thu, 03 Oct 96 13:21:22 PST

ASSY: PCMCIA Vendor

Wed, 30 Oct 1996 17:07:33 -0600

FWD: ASSY: PCMCIA Vendor

Thu, 31 OCT 96 08:19:46 MDT

Re: FWD: ASSY: PCMCIA Vendor

Thu, 31 Oct 1996 11:10:10 -0600

ASSY: Peelable Soldermask for Wave Soldering Process

Mon, 18 Nov 1996 15:36:48 -0800

ASSY: Peelable Soldermask for Wave Soldering Process

Tue, 19 Nov 1996 08:26:30 -0600

Re: ASSY: Peelable Soldermask for Wave Soldering Process

Tue, 26 Nov 1996 14:13:27 -0500

ASSY: Pem nuts installed prior to reflow

Thu, 17 Oct 1996 11:27:15 +0000

Re: ASSY: Polishing Fiducials

Tue, 12 Nov 96 09:44:14 PST

RE: ASSY: Polishing fiducials

Wed, 13 Nov 96 16:53:39 EST

Re: ASSY: Post-wave Warpage

Thu, 23 May 1996 12:17:07 -0400

ASSY: QUERIES ON IPC-A-610B & IPC-A-600D

18 Oct 96 17:26 GMT+0500

Assy: Re: Green Rust

Thu, 23 May 1996 11:37:08 -0400

ASSY: reflow of mixed technology

Wed, 14 Aug 1996 20:31:23 -0400

ASSY: Rework of PBGA package

Thu, 11 Jul 1996 03:40:27 -0400

RE:ASSY: Rework Simulation Test

Mon, 15 Jul 1996 14:59:24 -0400

Re: Assy: RF Boards

Tue, 12 Nov 96 07:13:34 CST

Re: ASSY: Security coating of SMT leads.

Wed, 13 Nov 1996 12:12:18 -0500

ASSY: Security coating of SMT leads.

Thu, 14 Nov 1996 08:37:17 +0000

Re: ASSY: Security coating of SMT leads.

Fri, 15 Nov 1996 09:42:00 -0500

Re[2]: ASSY: Security coating of SMT leads.

Fri, 15 Nov 1996 14:46 -0500 (EST)

Re: Assy: Semi-Auto Fine Pitch Rework Machines

Mon, 22 Apr 1996 09:59:32 -0400

ASSY: Short leads in a PWA

Tue, 26 Mar 96 17:36:11 CST

RE:ASSY: Short leads in a PWA

Wed, 27 Mar 1996 08:59:50 -0500

Wed, 27 Mar 1996 10:41:21 -0500

Wed, 27 Mar 1996 15:23:14 -0500

Re: ASSY: Smocks, are they necessary?

Wed, 27 Mar 1996 17:36:39 -0500

Sat, 23 Mar 96 12:49:31 CST

Re[2]: ASSY: SMT Shelf Life

Wed, 21 Aug 96 10:38:10 PST

Re: ASSY: SMT Soldering to Nickle pads

Tue, 19 Nov 1996 00:06:02 -0500

Assy: Solder ball removal

6 Aug 96 12:04:09 EDT

ASSY: Solder deposition on pin thru connector

Fri, 01 Mar 96 10:38:24

ASSY: Solder Fatigue Data Sn40 - Sn50

Mon, 08 Jul 96 14:47:06 PST

Re: ASSY: Solder Fatigue Data Sn40 - Sn50

Tue, 9 Jul 1996 11:08:39 +0400 (EDT)

ASSY: Solder in Connector Pins

Thu, 01 Aug 96 10:30:45 PST

Re: Assy: Solder Paste Height

Wed, 18 Sep 1996 09:50:48 -0400

RE: Assy: Solder Paste Height (#889153)

Tue, 17 SEP 96 16:53:54 MDT

Assy: Solder Paste in Wave Solde

Thursday, 12 December 1996 4:43pm ET

Assy: Solder Paste in Wave Solder Pots...

Thu, 12 Dec 96 07:12:48

Re: Assy: Solder Paste in Wave Solder Pots...

Thu, 12 Dec 1996 21:10:28 -0500

Re[2]: Assy: Solder Paste in Wave Solder Pots...

Fri, 13 Dec 96 17:17:24

Re: Re[2]: Assy: Solder Paste in Wave Solder Pots...

Mon, 16 Dec 1996 14:51:53 -0500

Re: ASSY: Solder Paste Viscosity

Wed, 01 May 96 16:56:18 PST

ASSY: Solder Paste Volume

Wed, 30 Oct 1996 08:45:28 -0600

Re: ASSY: Solder Paste Volume

Wed, 30 Oct 96 08:05:44 EST

Re: ASSY: Solder schools

Thu, 19 Sep 1996 08:13:02 -0600

Re: ASSY: Soldering process for 50 mil pitch connectors

Thu, 7 Nov 1996 21:21:18 -0500

Re: ASSY: Soldering process for 50 mil pitch connectors

Thu, 7 Nov 1996 22:05:49 -0500

ASSY: Soldering to Nickel

Wed, 8 May 96 14:38: 2 CDT

Re: ASSY: Soldering to Nickel

Thu, 9 May 1996 09:02:36 -0400

ASSY: Source for Copper in Flux Activity TM

Tue, 09 Apr 96 13:57:28 PST

Re: ASSY: Source for Copper in Flux Activity TM

Wed, 10 Apr 1996 14:12:44 -0400

ASSY: SPEC FOR PULL TEST

Thu, 08 Aug 96 19:46:27 EDT

re: ASSY: Stencil printing adhesive for chip components

Thu, 1 Aug 96 15:05:46 EDT

ASSY: StressRelief

Wed, 14 Aug 1996 17:27:00 +0000

ASSY: StressReliefAgain

Fri, 16 Aug 1996 15:48:00 +0000

ASSY: Surface Mount Plastic Components

Wed, 5 Jun 96 13:20:46 PDT

Re: Assy: Thermally Conductive Adhesive

Wed, 6 Nov 1996 07:35:38 -0500

Re: Assy: Thermally Conductive Adhesive

Mon, 11 Nov 1996 11:41:43 -0500

ASSY: tinning of components

Wed, 3 Apr 1996 10:25:52 -0600

Re: ASSY: Topside Reflow on .062 boards

Tue, 07 May 96 12:41:06 EST

Re: ASSY: User friendly ionic contamination tester?

Sat, 20 Jul 1996 13:20:47 -0700

Re: ASSY: VIAS DIA.

Wed, 21 Aug 96 09:42:37 EDT

ASSY: Whiskers on QFP's After Reflow

Thu, 01 Aug 96 08:06:28 PST

RE: ASSY: Whiskers on QFP's After Reflow

Fri, 02 Aug 96 08:40:08 PST

Assy:BlisterPack

Mon, 09 Sep 1996 18:10:00 +0000

Re: Assy:Board Identification

Tue, 03 Dec 96 11:05:08 PST

RE:ASSY:CLARIFICATIONS ON IPC 610B & 600D

25 Oct 96 09:23 GMT+0500

Wed, 22 May 96 13:14:01 EDT

Wed, 22 May 96 18:49:29 CST

ASSY:equipments for conformal coating

Fri, 24 May 96 14:02:00 PST

4 Oct 96 11:41 GMT+0500

assy:FLUX Related issues

Wed, 5 Jun 1996 05:39:04 -0400

Re: Assy:Flux residue on SMC

Wed, 14 Aug 96 10:24:57 PST

RE: Re: Assy:Flux residue on SMC (#937710)

Thu, 15 AUG 96 10:11:56 MDT

Thu, 23 May 1996 13:24:58 -0400

Assy:looking for production aid

Fri, 24 May 1996 09:41:59 -0400

ASSY:hot bar summary

Wed, 26 Jun 1996 10:48:07 -0400

ASSY:LeadProtrusion

Fri, 15 Nov 1996 16:11:00 +0000

re: ASSY:LeadProtrusion

18 NOV 96 07:06:02 EST

Tue, 10 Dec 1996 07:58:00 -0600

FWD: RE: assy:NiAu pwb soldering w/Sn62?

Wed, 23 OCT 96 10:13:10 MDT

ASSY:Oil coating on components.

Fri, 16 Aug 96 13:12:32 +0200

Re: ASSY:Oil coating on components.

Fri, 23 Aug 96 09:21:10 +0800

ASSY:PCB-rework

Wed, 23 Oct 96 17:35:33 +0200

Re: ASSY:PCB-rework

Thu, 24 Oct 1996 11:28:16 -0400

ASSY:PCMCIA card contract manufacturing

Tue, 4 Jun 1996 08:01:46 -0400

ASSY:PCMCIA card contract manufacturing

Thu, 6 Jun 1996 04:59:21 -0400

Re: ASSY:Quality of consumables.

Wed, 27 Nov 1996 10:21:54 -0500

Assy:S-BGA

Tue, 29 Oct 96 21:54:16 PST

ASSY:SMT pallets

Fri, 21 Jun 1996 09:44:13 -0400

ASSY:SMT pallets

Sat, 22 Jun 1996 03:45:33 -0400

Re:ASSY:solder mask problem

Sat, 17 Aug 1996 07:52:12 -0400

RE: ASSY:Solder Wicking,Fine Pitch Leads (#939978)

Thu, 19 SEP 96 08:50:20 MDT

Re: Assy:SPC of cleaning process

Mon, 3 Jun 1996 09:02:32 +0400 (EDT)

assy:spreading of paste flux

23 Nov 96 20:26 GMT+0500

Assy:StraightThruPartRetention

Thu, 12 Sep 1996 10:47:00 +0000

Assy:VerticalFill

Wed, 20 Nov 1996 13:26:00 +0000

ASSY; 3-D Bar Code Technology

Mon, 26 Aug 96 10:14:48 PDT

Re: ASTM D-3638

Thu, 18 Jul 96 09:43:02 PST

ASY: Conformal Coatings

Thu, 8 Aug 96 17:59:43 EDT

Re: ASY: Conformal Coatings

Mon, 12 Aug 96 08:09:14 CST

ASY: external high-voltage testing

Wed, 14 Aug 96 11:40:35 EDT

Re: ASY: HOT BAR EQUIPMENT

Mon, 10 Jun 96 10:12:19 PST

AT&T Spray Fluxer - Clarification to Verifone's Comments

Tue, 6 Feb 15:14:57 1996

AT&T Spray Fluxer - Clarification to Verifone's Comments

Sun, 18 Feb 1996 07:45:16 -1000

Re:ATE Contract Services wit...

Fri, 2 Feb 1996 23:20:04 -0500

ATE Contract Services with 206 or 309 Capability

Fri, 2 Feb 1996 01:46:10 -0500

ATI Driller / Router

Mon, 1 Apr 1996 02:35:23 -0500

Automated labeling equipment

Thu, 8 AUG 96 16:59:26 MDT

Re: Automatic solder Insp. system for PTH

Mon, 14 Oct 1996 19:52:28 -0400

Re: AW: Dielectric Constant-1 -4 gigaHz

Thu, 05 Dec 96 16:10:18 PST

Re: B-24 CCOUON

Tue, 20 Feb 1996 00:09:53 -0500

B-24 CCOUPON

Mon, 19 Feb 96 13:29:34 PST

Back panel info

Fri, 23 Feb 96 14:40:54 EST

backplane info

Thu, 18 Jan 96 12:37:39 EST

Re: backplane info

Fri, 26 Jan 96 08:22:53 EST

Bad boards...who pays

Tue, 22 Oct 96 11:35 WET DST

Re: Baking of Plastic Components

Mon, 25 Mar 96 10:48:47 +0800

Re: BALANCE Cu Construction

Thu, 25 Jan 96 22:01:50 EST

Re[2]: Bare board testing with integral components

Fri, 26 Jul 96 13:56:46 EST

Re: Beginners Course on Controlled Impedance

Tue, 3 Sep 1996 08:17:38 +0400 (EDT)

Re: Bellcore TR-NWT-000078

Thu, 18 Apr 96 16:11:09 PST

Bellcore

Fri, 23 Aug 96 18:40:52 EST

BELLCORE Standards

Mon, 06 May 1996 08:16:00 +0000

Re: BELLCORE Standards

Mon, 06 May 96 10:13:22 CST

Mon, 14 Oct 96 17:34:05 CST

Re: Benchmark Stud ies

Wed, 10 Apr 1996 13:08:53 -0400

Re: Benchmark Stud ies

Wed, 10 Apr 1996 13:10:30 -0400

Benchmarking

Thu, 06 Jun 96 09:58:11 CST

Re[2]: BGA

Thu, 11 Jan 96 15:13:26 EST

BGA and MCM

Wed, 11 Sep 96 15:10:53

BGA and MCM

Wed, 11 Sep 96 15:12:52

Re: BGA and MCM

Wed, 11 Sep 96 08:59:54 PST

Re[3]: BGA assembly.

Tue, 10 Dec 1996 14:05:20 -0500

Re[4]: BGA assembly.

Wed, 11 Dec 1996 13:29:35 -0500

BGA defects

Wed, 2 Oct 96 17:44:50 EDT

Re[2]: BGA FInish

Thu, 09 May 96 09:52:47 EST

Re[2]: BGA FInish

Thu, 09 May 96 09:52:47 EST

Re[2]: BGA FInish

Thu, 09 May 96 09:52:47 EST

BGA JEDEC Spec?

30 Apr 96 11:21:06 EDT

Re[3]: BGA Pattern

Wed, 21 Feb 96 12:34:28 EST

Re: BGA shape

Tue, 19 Nov 1996 18:40:20 -0500

BGA solderability test

Fri, 15 NOV 96 15:50:34 MST

BGA Standards

Thu, 22 AUG 96 12:08:59 MDT

Re: BGAs

Mon, 18 Nov 96 15:33:14 -0700

Re: BGAs

Tue, 19 Nov 1996 00:06:04 -0500

Black oxide on outer layers

Wed, 25 Sep 96 14:06:38 EDT

Black oxide on outer layers

Wed, 25 Sep 96 15:14:54 EST

Re: Black oxide on outer layers

Wed, 25 Sep 1996 16:31:21 -0400

Re: Black oxide on outer layers

Wed, 25 Sep 1996 19:41:21 -0400

Re: Black oxide on outer layers

Thu, 26 Sep 1996 09:15:14 +0400 (EDT)

Black Oxide Racks

Mon, 8 Jan 1996 21:43:07 +0100

Re: Black(??) oxide on outer layers

Thu, 26 Sep 1996 09:44:59 -0400

Re[2]: Blind Via's in MLB's

Mon, 19 Feb 96 15:30:59 MST

BLIND VIAS

Tue, 10 Dec 1996 06:46:06 EST

Re: blind vias

Tue, 10 Dec 1996 08:04:05 -0500

Blind vias

Fri, 20 Dec 1996 07:58:35 -0500

Re[2]: Board Assembly of Chip-Size Packaged ICs

Mon, 29 Jan 96 11:08:32 EST

Re: Board Specification (fwd)

Fri, 29 Mar 1996 23:23:13 -0500

FWD: Board stretch

Tue, 23 Apr 1996 18:19:29 -0600

Board warp

23 JUL 96 07:22:04 EDT

Board Warp

31 JUL 96 15:52:54 EDT

Board warp

22 AUG 96 07:14:07 EDT

Re:Re: Bottom side Adhesives

Tue, 10 Dec 1996 22:58:31 -0500

Bow & twist

Thu, 2 May 1996 15:37:01 +1000 (EST)

Re: Bow and Twist

Thu, 09 May 1996 09:49 -0500 (EST)

Re[2]: Bow and Twist

Fri, 10 May 1996 08:51 -0500 (EST)

Bow and twist - a new perspective for now/future

Fri, 2 Feb 1996 15:57:25 -0500

Re: Brittle Copper

Tue, 1 Oct 1996 17:28:58 -0400

Re: Brittle Copper

Tue, 1 Oct 1996 19:54:27 -0400

Re: bromine free laminates

Tue, 23 Jan 1996 11:10:10 -0500

Re: Brown resin like residue in solder bath

Thu, 12 Dec 1996 08:47:01 -0500

Re: BT desmear

Wed, 28 Feb 96 18:35:02 EST

Bubbles in Conformal Coating

Fri, 26 Jul 96 10:38:56 EST

Re: Bubbles in Conformal Coating

Mon, 29 Jul 1996 17:12:50 -0400

Bubbles in Conformal Coating

Thu, 07 Nov 96 16:59:12 EST

re: Buried Resistors

Wed, 28 Feb 96 11:24:08 PST

Re: C A Picard Exposure Frames

Wed, 2 Oct 1996 19:48:34 -0400

Re: Can This Improvement to TechNet be Made?

Fri, 29 Mar 1996 15:30:22 -0500

FWD: Capping vias for BGA's

Wed, 06 Nov 96 17:12:50 EST

Fri, 8 NOV 96 08:34:14 MST

Carbon Disulfide Generation

Tue, 4 Jun 1996 12:12:17 -0400

Carbon Ink vs Palladium

Wed, 17 Jul 1996 08:20:46 -0400

Carbon Treatment

Mon, 29 Jul 96 09:06:29 EST

Re: Carbon Treatment

Tue, 30 Jul 1996 09:37:40 -0400

Cardboard boxes

26 JUL 96 09:12:20 EDT

Re[2]: Cardboard boxes

Fri, 26 Jul 96 14:45:04 CST

CAUSE AND CORRECTIVE ACTIONS FOR PINK RING AND WEDGE VOIDS..

Thu, 22 Aug 1996 04:38:56 EDT

Re: Causes for Shorts on PWB's

Mon, 22 Jan 1996 13:16:38 -0500

Re: ccMail SMTPLINK Undeliverable Message

Wed, 10 Jul 96 13:53:37 EDT

CE and Press Fit Connectors

Tue, 13 Feb 96 18:46:15 EST

CEM-3 vs. FR-4

Fri, 13 Dec 96 14:49:34 CST

Re: Certification

Tue, 26 Mar 1996 14:23:36 -0500

Re: Changing of reflow profile.

Tue, 2 Jul 1996 20:03:01 -0400

Re: chemical clean prior to soldermask

Sat, 10 Aug 1996 04:13:12 -0400

Re: chemical clean prior to soldermask

Sat, 10 Aug 1996 04:13:01 -0400

Re: Chemical Strippers

Fri, 9 Aug 1996 20:10:56 -0400

Chemistry to strip 90/10 SnPb

Mon, 4 NOV 96 13:27:15 MDT

Re: Chemistry to strip 90/10 SnPb

Mon, 4 Nov 1996 23:31:01 -0500

Re: Chip Resistors Breaking

Wed, 4 Dec 1996 22:39:22 -0500

Christmas

Sun, 22 Dec 1996 17:25:53 -0500

CIQC

Thu, 25 Apr 96 10:08:06 EDT

Clean Rooms

Wed, 26 Jun 1996 09:01:00 -0600

Cleaning PCB's in Cascade to pass SIR test

Sun, 29 Sep 1996 23:31:21 -0400

Cleaning SMT PCB's with demi-water or IPA.

Fri, 02 Feb 96 12:17:24 -0100

Cleaning unreflowed no-clean paste

Mon, 19 Aug 96 18:30:04 EDT

Cleaning with Water and IPA for Surface Mount ?!

Mon, 05 Feb 96 11:37:29 -0100

Re: COB/MCM

Fri, 27 Sep 96 17:01:45 PST

Re: Collecting Thermal Data on Wave Soldered SMC's

Mon, 11 Nov 1996 09:04:59 -0500

Re: Collumated printers and fine lines

Fri, 22 Nov 96 13:54:32 PST

Re[2]: Collumated printers and fine lines

Sat, 23 Nov 96 07:20:51 EST

COMP : BGA Positional Tolerance

Tue, 2 Jul 96 08:58:33 +0800

Re:Comparison of ANSI/J-STD-001A to Mil-Std-200A

Wed, 28 Aug 1996 08:47:23 +0000

COMPENSATION MACHINE

Fri, 13 Sep 1996 03:43:51 EDT

Compliancenet

Fri, 12 Jan 96 00:11:30 EST

component mounting

Thu, 14 Mar 1996 16:06:05 -0600

Re: components in wiring

Mon, 09 Dec 96 17:11:49

Re: COMPOSITECH

Fri, 26 Jan 96 11:20:48 EST

Conductive Anodic Filament Growth (CAF)

Wed, 4 Dec 1996 09:56:59 -0500

Re: Conductive Anodic Filament Growth (CAF)

Wed, 4 Dec 1996 16:22:06 -0500

Conductive Epoxy w/ Solder Term. Chip Caps

Wed, 21 Feb 96 10:16:24 EST

Re: Conductor widths

Wed, 10 Apr 96 11:09:12 CST

Re: Conductor widths

Thu, 11 Apr 96 11:24:28 PST

CONFERENCE PAPER

Thu, 28 Nov 1996 11:13:48 +0000

RE: CONFERENCE PAPER

Sat, 30 Nov 96 13:14:00 EST

Fwd: conformal coating

Thu, 19 Sep 1996 13:01:25 -0400

Conformal Coatings

Tue, 6 Aug 96 16:43:15 EDT

Re[2]: Conformal Coatings

Wed, 07 Aug 96 10:47:26 PST

FW: Connecting wires to PCB's

6 Mar 96 16:19:01 -0600

Re: Connecting wires to PCB's

Wed, 06 Mar 96 21:38:23 dst

contract manufacturing

Wed, 7 Feb 1996 16:26:08 -0600

Fri, 9 Feb 1996 09:34:01 +1100 (EST)

Re: Controlled depth drilling

Fri, 9 Feb 1996 10:18:39 +1100 (EST)

Thu, 12 Sep 96 12:48:27 EST

Re: Controlled Impedance

Fri, 12 Apr 1996 09:20:10 GMT

Re[2]: Controlled Impedance

Tue, 21 May 96 20:07:28 EST

Re: Controlled Impedance - Dielectric Constant

Tue, 21 May 96 11:36:42 CST

Re: Controlled Impedance - Dielectric Constant

Tue, 21 May 96 11:35:24 CST

Re: Controlled Impedance - Dielectric Constant

Tue, 21 May 96 14:31:29 CST

Re: Controlled Impedance - Dielectric Constant- Comment

Tue, 21 May 1996 10:20:04 -0400

Re[2]: Controlled Impedance - Dielectric Constant- Comment

Wed, 22 May 96 08:39:05 CST

Re: Controlled Impedance - Reference Planes

Thu, 30 May 1996 09:48:41 +0400 (EDT)

Conveyorized oxide?

Thu, 26 Dec 1996 00:31:17 -0500

Re: Conveyorized oxide?

Thu, 26 Dec 1996 07:31:37 -0500

Re: Conveyorized oxide?

Thu, 26 Dec 1996 09:20:39 -0500

Copper coupons for J-STD-004 Flux Activity Wetting Test

Thu, 25 Apr 96 09:24:08 PST

copper gold galvanic during OSP application

Wed, 18 Sep 96 16:14:08 MST

Re: copper gold galvanic during OSP application

Wed, 18 Sep 1996 22:13:16 -0400

Re: copper gold galvanic during OSP application

Mon, 23 Sep 96 10:18:23 EST

Re: Copper Pattern Plating Nodgles

Wed, 21 Aug 1996 20:54:48 -0400

Re: Copper Pattern Plating Nodgles

Fri, 20 Sep 1996 13:24:22 -0400

Thu, 19 Dec 1996 21:02:33 -0500

Fri, 20 Dec 1996 10:30:44 -0500

Fri, 20 Dec 1996 17:09:24 -0500

Re: Fwd: Re: Copper plating

�;�s �Ë؉-�(c)� 20 Dec 96 09:50:08 EST

Tue, 24 Dec 96 11:27:55 EST

Re: Copper Reclaim/Sale

Tue, 17 Dec 1996 10:20:39 -0500

copper thickness

Mon, 29 Apr 1996 08:44:27 -0400

Re: Copy of: Re: Fwd: SIR Handbook

Mon, 1 Apr 1996 14:08:03 -0500

Re: Copyright on a PWB (fwd)

Wed, 24 Apr 96 13:51:36 CST

Re: Corner cracks

Fri, 6 Sep 1996 14:48:01 -0400

Correcte info for NEPCON proceedings

Wed, 1 May 1996 16:43:08 +0000

cracked solder joints with alloy 42 tsops

Tue, 8 Oct 1996 14:57:22 -0400

Creepage

Tue, 6 Feb 1996 03:07:57 -0500

Re: CRIMSON

Fri, 16 Aug 1996 18:22:01 -0400

Cross-section

Tue, 10 Sep 1996 13:52:09 +0400 (EDT)

RE: CuPlating-Nodules

Mon, 23 Dec 1996 17:08:38 -0500

Re: FW: Cupric Chloride Etching

Sat, 15 Jun 1996 09:50:08 -0400

Dangerous Material

Tue, 19 Nov 1996 11:27:07 -0500

Re: Dangerous Material

Sat, 23 Nov 96 14:16:00 EST

Re: Dangerous Material

Tue, 26 Nov 1996 14:13:11 -0500

Re: Deburring

Tue, 30 Apr 96 06:39:47 MST

Re: Definitions

Wed, 15 May 96 10:35:52 CST

Defoaming agents

Mon, 23 Sep 96 14:57:05 EDT

Delamination

Mon, 27 May 1996 16:14:32 +0200

depanelization

Thu, 25 Jan 96 15:30:00

Re: depanelization

Fri, 26 Jan 1996 07:50:15 -0500

Re: des

Sun, 24 Nov 1996 22:31:54 -0500

DES and fab?? Back Pressure

Wed, 30 Oct 96 08:16:38 EST

Re: des re: hot trace width

Tue, 09 Apr 96 07:52:13 CST

Re[2]: des re: hot trace width

Tue, 09 Apr 96 12:55:53 CST

re: DES VME Sizes

Thu, 25 Jul 96 14:43:33 EDT

Re: DES- Gerber formats?

Tue, 5 Nov 1996 13:40:21 -0500

Re: DES-PC Board Frequency Limi

Thu, 09 May 96 17:07:05 CST

Re: DES/ASSY : BGA design question

Fri, 10 May 96 02:28:23 EDT

RE: DES/ASSY: 2 pin shunt connector

Wed, 4 Dec 1996 12:23:20 -0600

Re[2]: DES/ASSY: 2 pin shunt connector

Thu, 05 Dec 96 16:08:21

Re[2]: DES/ASSY: 2 pin shunt connector

Thu, 05 Dec 96 16:27:58 PST

re: DES/ASSY: Diode Polarity

Fri, 2 Aug 96 14:45:23 EDT

DES/ASSY: Max size Thermal Relief

Sat, 15 Jun 96 01:22:24 EDT

re: DES/FAB/ASSY ruggedize

Thu, 25 Jul 96 15:12:15 EDT

Re: DES/FAB/ASSY: Part & via to board edge spacing

Tue, 30 Apr 1996 20:39:20 -0400

DES/FAB/ASSY: Ruggedized PWA's

Mon, 22 Jul 96 18:24:35 EDT

DES/FAB: hole wall thickness

Tue, 9 Apr 1996 16:44:28 -0400

Des/Fab: IPC-D-356 netlist test

Mon, 1 Jul 96 18:03:49 EDT

DES/FAB: IPC-D-949 Solder Coat Thickness

Thu, 2 May 96 16:16:12 PDT

Re: Re: DES/FAB: PEMNUT FASTENERS IN FR4 FIBERGLASS

Thu, 11 Jul 96 19:37:52 EDT

DES/FAB:Simulation data translation

Mon, 4 Nov 1996 15:30:15 +0100

DES: "Spec"ing Controlled Impedance

Tue, 08 Oct 96 10:28:55 CST

Re: DES: 1/2 OZ. vs 1 OZ. Cu

Fri, 1 Nov 1996 11:11:59 -0500

DES: 1500V isolation

Tue, 11 Jun 1996 11:35:26 +1000 (EST)

DES: Backplane termination

Mon, 25 Nov 1996 14:15:23 -0700 (MST)

re: DES: Blind or Burried Via vs Number of Layers in PWB

Wed, 21 Aug 96 02:41:02 EDT

Re: DES: Conductor Widths for High Current Conditions

Mon, 08 Apr 96 11:10:59 CST

RE: DES: copper thickness

Mon, 29 Apr 96 11:46:00 EDT

Re: DES: DFM References

Thu, 09 May 96 08:22:12 CST

DES: Embedded Microstrip IPC-D-317A

Wed, 18 Dec 96 11:28:06 CST

Re: DES: EMI and micro switching induced noise

Tue, 27 Aug 96 12:48:25 EDT

DES: Hole Sizes on PCBs for tight tolerance non-plated holes

Mon, 04 Nov 96 20:09:22 EST

DES: HOLE SIZES ON PCBS FOR TIGHT TOLERANCE NON-PLATED HOLES

Tue, 05 Nov 1996 04:13:24 EST

DES: IPC-D-275

Tue, 09 Apr 96 12:46:40 CST

DES: NC flux/stacked film capacitors

Mon, 15 Apr 1996 10:05:59 -0400

DES: New Material?

Fri, 10 May 96 10:51:47 CST

DES: New Material?

Fri, 10 May 96 14:19:25 CST

Re[2]: DES: New Material?

Sat, 11 May 96 11:27:28 CST

DES: ODD/EVEN Mode Impedances

Tue, 28 May 96 10:55:51 CST

DES: Punched via

Thu, 31 Oct 96 15:43:32 EST

DES: Re: Delay with feedthrus

Mon, 20 May 96 15:05:16 CST

DES: Re: PCB Copyright

Wed, 17 Apr 96 10:59:12 CST

DES: RE>Sheet Resistivity of 1 OZ. Copper

Mon, 14 Oct 1996 22:27:16 -0700

DES: RE>Sheet Resistivity of 1 OZ. Copper

Tue, 15 Oct 1996 07:33:24 -0700

DES: Re[2]: Conductor Widths

Thu, 11 Apr 96 09:34:04 CST

Re: DES: Soldermask Webs

Thu, 9 May 96 23:18:37 EDT

DES: Temperature Rise vs. Current of Heavy Copper

P�B } ��

DES: Temperature Rise vs. Current of Heavy Copper

�;�s �Ë؉-�(c)� 20 Dec 96 13:27:07 EST

Re: DES: Thermal Relief From Ground Planes

Thu, 1 Aug 96 18:24:42 EDT

Re: DES: Tooling Holes tolerances.

Mon, 30 Sep 1996 08:30:34 -0400

Re: DES: Tooling Holes tolerances.

Mon, 30 Sep 1996 08:56:54 -0600

Re: DES: VIAS - Thermal vs. Direct

Tue, 24 Sep 1996 13:02:27 -0700

Re[3]: DES: VIAS - Thermal vs. Direct

Tue, 24 Sep 96 16:02:26 EST

DES:,FAB: - Thermal relief for via holes ??

26 Jun 96 13:18:00 -0500

re: DES:,FAB: - Thermal relief for via holes ??

Wed, 26 Jun 96 16:14:30 EDT

DES:ASSY: component mounting

Wed, 29 May 1996 18:24:30 -0500

Re: DES:ASSY: component mounting

Thu, 30 May 96 18:20:43 PST

Re[2]: DES:ASSY: component mounting

Fri, 31 May 1996 09:20:48 -0500

DES:FAB:ASSY: Breakdown

Wed, 7 Aug 1996 09:25:02 +1000 (EST)

Re: DES:FAB:ASSY: Breakdown

Wed, 07 Aug 96 08:46:57 EDT

Re: FW: DES:FAB:ASSY: Breakdown

Tue, 13 Aug 1996 14:39:15 +0400 (EDT)

Re: DES:MIL-G-45204C

Thu, 29 Aug 96 13:18:15 PST

Des:Pb-Free solder etc

Fri, 20 Sep 96 17:55:23 JST

Re: DES> Connector Reliability

Mon, 29 Apr 96 15:56:39 CST

re: Design

Mon, 16 Sep 96 12:54:48 EDT

Re: Re[2]: Design (fwd)

Tue, 17 Sep 1996 12:43:32 -0400

Re: Design for Manufacture?

Mon, 02 Dec 96 13:09:06 EST

Re: Design for Manufacture?

Mon, 2 Dec 1996 13:23:45 -0500

RE: Re: DESIGN: Bypass capacitor under PLCCs? (#138450)

Tue, 2 Apr 1996 08:44:51 -0700

DESIGN: D-275 CURRENT CHART, RALPH ARE YOU OUT THERE?

Thu, 19 Dec 96 09:52:01 CST

Dewetting & Pumice Scrub

Wed, 18 Sep 1996 10:53:20 -0400

Re: Dewetting & Pumice Scrub

Wed, 18 Sep 1996 22:13:21 -0400

Re: Dewetting & Pumice Scrub

Thu, 19 Sep 1996 09:34:39 -0400

Re: DFA software

Thu, 31 Oct 1996 14:36 -0500 (EST)

Dfe Info

Thu, 28 Mar 1996 10:27:03 -0500

DFM

Tue, 13 Feb 1996 16:37:41 -0600

DFM Handbook

Tue, 5 Mar 1996 11:12:14 -0600

Re: diazo problems during lpi imaging

Tue, 17 Dec 1996 11:58:24 -0500

Dielectric/plated barrel separation in PWB holes

Wed, 18 Sep 1996 18:17:12 -0400

Re: Dielectric/plated barrel separation in PWB holes

Wed, 18 Sep 1996 22:04:34 -0400

Re: Differences in net lists

Tue, 1 Oct 1996 10:01:16 -0400

dimensional question

Tue, 23 Apr 96 11:07:56 EST

Diode Polarity

Fri, 2 Aug 1996 08:54:53 -0400

Re: Diode Polarity

Fri, 2 Aug 1996 10:51:14 -0500

FW: DIRECT METALIZATION

Mon, 30 Dec 96 17:46:24 PST

Re: Direct metalization of Flex Rigid PWBs

Tue, 23 Apr 96 18:45:13 EST

Discontinued MIL SPECS

Thu, 18 Apr 1996 12:22:50 -0400

Re: Disscussion on seepage /resist lifting problem in 4/4mil

Mon, 09 Sep 96 07:05:45 EST

Re[2]: Disscussion on seepage /resist lifting problem in 4/4mil

Tue, 10 Sep 96 06:09:16 EST

Re: Does IPC Puplish a standard on ESD

Mon, 11 Nov 1996 14:03:38 -0600

Re: Don't want to scrap it.

Wed, 27 Mar 1996 18:03:11 -0500

re: Re: Don't want to scrap it. FAB,ASSY,DES

Fri, 29 Mar 96 15:09:30 PST

Re: Double Treat Laminate Surface Preparation

Tue, 16 Jan 1996 10:55:00 -0500

Dougal Stewart's email address <HAST>

Thu, 26 Sep 96 09:09:13 PST

Re: Drill File Format

Tue, 5 Nov 1996 15:16:51 -0700 (MST)

Re: Drilling spindle runout

Tue, 24 Sep 96 10:05:05 MST

Re[2]: Drilling spindle runout

Thu, 26 Sep 96 10:58:18 MST

Re: Drilling Study

Tue, 30 Jan 1996 23:36:47 -0500

Re: Drilling Study

Wed, 31 Jan 1996 13:14:08 -0500

Re: Drilling Study

Wed, 31 Jan 1996 19:02:33 -0500

Dross

Fri, 27 Dec 1996 18:17:48 -0500

dry box

Mon, 11 NOV 96 16:24:48 MST

Re: Dry Box Source?

Tue, 12 Nov 96 08:17:26 PST

Re: Dry Film adhesion

Sun, 25 Feb 1996 23:14:53 -0500

Re: Dry Film Breakdown

Sun, 15 Sep 1996 10:02:51 -0400

Re: Dry Film Processing

Wed, 28 Feb 1996 23:26:46 -0500

Re: Dry Film Resist Test

Tue, 9 Jul 1996 23:35:40 GMT

Re: Dry Film Resist Test

Fri, 19 Jul 1996 20:01:55 -0400

Dryfilm

Fri, 12 Apr 96 10:17:05 EST

Re: Dryfilm soldermask

Tue, 15 Oct 1996 20:20:31 -0400

Re: Dryfilm soldermask

Tue, 15 Oct 1996 20:14:10 -0400

Re: Dst foil

Thu, 8 Aug 1996 22:32:42 -0400

Re: Dst foil

Fri, 9 Aug 1996 16:07:53 -0400

Re: Dull solder joint - Gold

Mon, 2 Dec 1996 07:41:21 -0500

Dynachem Film Problems

Mon, 1 Apr 1996 13:24:43 -0500

Re: Dynachem Film Problems

Mon, 1 Apr 1996 16:41:18 -0500

E.T.

Thu, 23 May 96 17:15 EDT

EC Low Voltage Directive

Mon, 11 Mar 1996 21:34:03 -0500

Re: EC Low Voltage Directive

Fri, 22 Mar 96 08:22:06 CST

EC Low Voltage Directive

31 Oct 96 04:14:48 EST

Editors/Publishers

Thu, 4 Jan 1996 09:29:39 -0500

Re: Editors/Publishers

Fri, 05 Jan 96 07:06:53 PST

Effects of poorly controlled Black-Oxide process

24 Apr 96 13:13:00 -0500

Electroless Ni-Boron

Mon, 2 Dec 96 17:34:18 CST

Electroless Ni/Immersion Au

Mon, 26 Feb 96 13:33:53 PST

Re: Electroless Nickel

Fri, 10 May 1996 17:55:08 -0400

Electroless nickel - immersion gold

Fri, 12 Jul 96 14:51:13 EDT

Re: electroless nickel et. al.

Tue, 6 Aug 1996 11:17:45 -0400

Re: Electronic Packaging & Production

Tue, 16 Jul 96 07:53:24 PST

Electronics industry benchmarking tool

Thu, 20 Jun 96 09:02:44 PST

EMERSION GOLD

Thu, 21 Nov 1996 12:57:26 EST

re: EMI and micro switching induced noise

Fri, 23 Aug 96 13:50:13 EDT

Emissivity

Wed, 18 Sep 96 12:08:24 EDT

RE: Emissivity

Thu, 19 Sep 1996 10:16:08 -0700

EMPF

Thu, 2 May 1996 10:03:04 -0400

Employment

Wed, 07 Aug 1996 08:56:10 -0400

Employment Opportunities

Mon, 12 Feb 1996 15:05:17 -0500

Fwd: Employment Opportunity

Wed, 21 Feb 1996 09:49:44 -0500

Employment Opportunity

Sat, 15 Jun 96 13:02:50 EST

Encapsulation of Alloy 42 TSOP Solder Joints

Wed, 6 Nov 1996 7:32:26 -0500

Encapsulation of TSOP Solder Joints

Fri, 8 Nov 1996 12:42:06 -0500

Encapsulation of TSOP Solder Joints

Fri, 8 Nov 1996 12:45:19 -0500

Re: Eng:Formats Translators

Mon, 14 Oct 1996 15:05:40 -0400

Re: Eng:Formats Translators

Tue, 15 Oct 1996 08:37:15 -0600

Engineer Exercises Right Side Of Brain!

Fri, 20 Dec 1996 08:52:41 -0500

Engineer for Hire

Mon, 27 May 1996 12:45:45 -0400

Re: Entec 106

Mon, 04 Nov 96 13:33:04 EST

Re: Entech

Thu, 3 Oct 1996 11:12:53 +1000 (EST)

Re[2]: Entech

Thu, 03 Oct 96 14:58:41 MST

Re: ENTEK 106

Mon, 4 Nov 1996 23:10:36 -0500

Re: ENTEK 106

Sat, 16 Nov 1996 16:39:12 -0500

Re: Entek/flex

Thu, 1 Feb 1996 15:17:22 -0500

Environmentally friendly saponifiers

Tue, 15 Oct 96 17:57:34 EDT

Re: Environmentally friendly saponifiers

Wed, 16 Oct 1996 10:24:56 -0400

Re: Environmentally friendly saponifiers

Wed, 16 Oct 1996 09:34:36 -0500

EPOXY BONDING COMPONENTS TO SN/PB

Fri, 08 Nov 96 13:26:27 PST

Re: ESD

Mon, 29 Jan 1996 09:00:37 +1100 (EST)

ESD Material Evaluation

7 Dec 96 13:41 GMT+0500

Re: ESD Material Evaluation

Mon, 9 Dec 1996 12:41:59 -0500

ESD Material Evaluation

12 Dec 96 15:24 GMT+0500

ESD-humidity control

Tue, 17 Dec 1996 13:35:54 -0600

Re: ET Test Pins

Mon, 07 Oct 96 09:12:41 PST

Re: Etch Information

Sat, 22 Jun 96 10:16:41 EST

Re: Exposed copper

Tue, 23 Jul 1996 13:44:47 -0400

Re: Exposed copper

Wed, 24 Jul 1996 16:56:22 -0400

Exposed Copper

Mon, 9 Dec 96 10:08:28 CST

Re: Exposed copper after electroless nickel gold

Thu, 25 Apr 96 07:48:58 EST

re: Exposed Copper on Assemblies

Thu, 22 Feb 96 14:52:00 PST

Exposed Copper on Assemblies

Fri, 23 Feb 96 10:33:42 -0800

Exposed Copper on Assemblies

Fri, 23 Feb 96 14:20:11 -0800

Exposed Copper on Assemblies

Fri, 23 Feb 96 15:09:31 -0800

FAB

Wed, 03 Apr 96 11:34:58 EST

Re: FAB

Fri, 2 Aug 1996 13:59:15 +0400 (EDT)

Re: Fab

Wed, 20 Nov 1996 08:40:59 -0500

Re: Fab

Wed, 4 Dec 1996 10:42:00 -0500

Re:Fab

Thu, 19 Dec 1996 12:55:49 -0500

Re: FAB - Durabond as a replacement for Black Oxide...

Fri, 8 Nov 1996 13:49:03 -0500

Re: FAB - Durabond as a replacement for Black Oxide...

Fri, 8 Nov 1996 22:08:15 -0500

Re: FAB - Durabond as a replacement for Black Oxide...

Sat, 9 Nov 1996 00:13:44 -0500

Re[2]: FAB - Durabond as a replacement for Black Oxide...

Sat, 09 Nov 96 16:01:36 EST

Re: Re[2]: FAB - Durabond as a replacement for Black Oxide...

Sun, 10 Nov 1996 12:19:51 -0500

Re: Re[2]: FAB - Durabond as a replacement for Black Oxide...

11 Nov 1996 08:29:14 CST

Re: FAB - IPC-ML-910 & IPC-ML...

Wed, 13 Mar 1996 10:18:00 -0500

FAB - JOB Opening

Thu, 15 Aug 1996 15:08:31 +0400 (EDT)

fab - looking for QUAD control impedance software

Thu, 31 Oct 1996 09:35:04 GMT

Fab - RB-276

Tue, 28 May 1996 13:49:46 -0400

Re: Fab - RB-276 with clarification

Tue, 28 May 96 15:33:12 PST

Fab - RB-276?

Tue, 28 May 96 08:52:25 PST

Re[2]: FAB - Small Hole Drilling

Fri, 13 Dec 96 13:24:46 EST

Re[3]: FAB - Small Hole Drilling

Fri, 13 Dec 96 17:27:24

Re: Fab - Used tool resale

Tue, 25 Jun 1996 11:05:19 -0400

Re: FAB : Odd Layer PCB's

Thu, 27 Jun 1996 06:56:25 -0400

Re: FAB : Odd Layer PCB's

Thu, 27 Jun 96 07:34:31 CST

Re: FAB : Odd Layer PCB's

Thu, 27 Jun 96 07:59:14 EST

Re: Fab :chemical-clean roller marks

Wed, 11 Dec 1996 10:28:53 -0500

Re: FAB and ASSY - Sulphur contamination

Thu, 25 Apr 96 10:13:55 EST

Re:FAB Delamination

Tue, 28 May 96 06:51:16 EST

Re[2]: FAB Delamination

Fri, 31 May 96 09:35:23 EST

Re: Re[2]: FAB Delamination

Sun, 2 Jun 1996 13:40:33 -0400

Re[4]: FAB Delamination

Mon, 03 Jun 96 07:16:31 EST

Fab Employment Opportunity

Wed, 30 Oct 96 20:07:38 EST

Fab FAB Re: Copper Peeling Problem

Tue, 2 Apr 1996 09:33:13 -0500

Re:FAB gold plating problem

Thu, 25 Apr 96 07:32:13 EST

Re: Re[2]: FAB gold plating problem

Fri, 26 Apr 1996 01:03:17 -0400

Re[4]: FAB gold plating problem

Fri, 26 Apr 96 08:51:42 EST

Fab houses

Thu, 21 Mar 1996 20:06:10 -0500

Fab or Assy: Instron Tester

Thu, 02 May 96 12:19:33 EST

Re: Fab or Assy: Instron Tester

Mon, 6 May 1996 12:14:17 -0400

Fab or Des: Thickness of foil

Fri, 28 Jun 1996 11:16:54 -0400

Re: FAB or DES: Z-Axis expansion

Thu, 05 Sep 96 14:49:59 EDT

FAB Re Tin plt. instead of Sn/Pb

Tue, 18 Jun 1996 14:13:59 -0400

Thu, 20 Jun 1996 19:17:49 -0400

Thu, 20 Jun 1996 21:39:07 -0400

Fri, 21 Jun 1996 03:42:21 -0400

Re[2]:FAB Teflon-like materials

Fri, 21 Jun 96 12:15:29 EST

Re: FAB RE: Shadow

Fri, 26 Jul 96 15:19:13 PST

FAB Studies vs. Wirewrap

Tue, 16 Apr 96 13:12:36 EST

Fri, 12 Jul 96 16:19:42 EST

RE: FAB Test Fixture Loading

Mon, 30 Sep 1996 15:31:49 -0400

FAB, ASSY: "Copper Burning" during plating

Mon, 21 Oct 1996 11:54:46 +0400 (EDT)

Re: FAB, ASSY: "Copper Burning" during plating

Mon, 21 Oct 1996 13:46:26 -0500

FAB,DES:Planar magnetics

Fri, 25 Oct 1996 03:33:00 -0400

Re: Fab-Ionic Contamination

Tue, 30 Jul 96 14:35:03 EDT

RE: Fab-Ionic Contamination (#504239)

Tue, 30 Jul 1996 12:10:34 -0600

Fab-Re: More nailheading

Thu, 2 May 1996 16:49:40 -0400

Re: Fab-Re: More nailheading

Fri, 03 May 96 07:31:52 EST

Re[2]: Fab-Re: More nailheading

Sat, 04 May 96 08:15:07 EST

Fab-re: Multiple HASL

Sun, 28 Apr 1996 14:22:27 -0400

Fab-Re: Nailheading

Sun, 28 Apr 1996 14:04:41 -0400

Fab. Re: Santa Clara process

Wed, 14 Aug 1996 20:11:08 -0400

RE:FAB/ASSY

Mon, 23 Dec 96 15:29:04 EST

Re: Fab/Assy : Nitorgen/Inert Storage Chamber/Cabinet

29 JUL 96 08:04:47 EDT

FAB/ASSY: Gold Wire Bonding Tests

Tue, 16 Jul 96 09:08:42 EST

Re: FAB/ASSY: Lifted land criteria

Wed, 17 Jul 96 08:58:22 EDT

Re: FAB/ASSY: OSP to No Clean Flux

Fri, 16 Aug 96 10:39:19 PST

Re: FAB/ASSY: Reliability w/conductor width reduced

Fri, 01 Nov 96 08:15:51 EST

Fab/assy:reference designators

Tue, 9 Jul 1996 16:12:19 -0400

Re: Fab/assy:reference designators

Wed, 10 Jul 96 08:37:02 PST

FAB/DSN: LCC

Thu, 24 Oct 1996 12:17:17 -0500

Re: Fab/HO Reflow

Mon, 9 Dec 1996 18:29:37 -0500

Re: Fab/HO Reflow

Wed, 11 Dec 1996 10:04:07 -0500

FAB:

Wed, 31 Jul 96 10:22:36 MST

FAB: Abrasion resistant coatings

Fri, 11 Oct 96 11:15:26 EST

FAB: Additive Processes

Thu, 26 Dec 1996 22:36:20 -0500

Re: FAB: adhesiveless rigid/flex covercoat

Mon, 1 Apr 1996 18:00:37 -0500

FAB: Aluminum Processing

Fri, 03 May 96 14:57:12 EST

Re: FAB: Aluminum Processing

Mon, 6 May 1996 01:07:35 -0400

FAB: AOI DATABASE TERMS AND DEFS

Thu, 21 Mar 96 08:20:40 EST

FAB: Arlon

Wed, 13 Nov 1996 13:12:00 -0600

Re: FAB: Arlon

Wed, 13 Nov 96 13:33:09 EST

Re: FAB: Automatic exposure machines

Tue, 18 Jun 1996 16:06:17 -0400

Thu, 6 Jun 1996 20:20:52 -0400

Fri, 7 Jun 96 02:57:08 EDT

Fri, 07 Jun 96 08:24:24 CST

Fri, 7 Jun 1996 12:34:18 -0400

Fri, 7 Jun 1996 13:00:57 -0400

RE: FAB: Broken Drill Bits

Tue, 11 Jun 96 18:05:38 EST

FAB: BLIND VIAS

Thu, 07 Nov 1996 07:17:12 EST

FAB: Bonding Plating

Fri, 27 Sep 1996 16:13:41 -0500

FAB: Bonding Plating

Tue, 01 Oct 1996 08:22:07 -0500

Re: Fab: Brittle Copper

Wed, 2 Oct 1996 15:21:11 -0400

Thu, 29 Aug 96 16:07:22 EST

Fab: Carbon Treatment

Mon, 14 Oct 1996 15:32:00 -0400

Re: Fab: Carbon Treatment

Mon, 14 Oct 1996 21:59:29 -0400

Fab: Card Bus 90 Ohms?

Tue, 24 Sep 96 10:10:24 EST

Re[2]: FAB: chemical-clean roller marks

Thu, 5 Dec 1996 09:57:24 -0500

Thu, 05 Dec 96 08:37:42 PST

Thu, 05 Dec 96 19:08:57 MST

Sat, 7 Dec 1996 11:55:18 -0500

Re: FAB: Cleanliness test on bare and soldermask and mounted PWC.

Mon, 9 Dec 1996 00:12:15 -0500

FAB: Cirlog

Wed, 9 Oct 1996 14:35:27 -0500

Wed, 16 Oct 1996 15:12:26 -0400

Re: FAB: Cleanliness test on bare and soldermask and mounted PWC.

Thu, 17 Oct 1996 11:50:45 -0400

Re: FAB: Cleanliness test on bare and soldermask and mounted PWC.

Thu, 17 Oct 1996 12:15:39 -0400

Re: Fab: CMI Eddy Current Probes

Thu, 4 Apr 1996 11:58:59 +0500 (EST)

Re: FAB: Compositech laminate

Fri, 20 Dec 1996 12:57:30 -0500

re: FAB: Conductive epoxy/ink circuitry.

Fri, 9 Aug 96 01:30:12 EDT

FAB: Copper Filled Via's

Wed, 21 Aug 1996 16:03:09 -0500

FAB: Cross Sections

Fri, 6 Sep 1996 15:37:01 -0400

RE: FAB: Cross Sections

Mon, 9 Sep 96 10:06:34 MET DST

Re: FAB: Cut Sheet Lam

Wed, 18 Sep 1996 10:45:55 -0400

FAB: DATE CODES

Thu, 22 Aug 1996 05:55:12 EDT

Re: FAB: DELMAT

Fri, 1 Nov 1996 08:50:23 -0500

FAB: Direct Metalization

Tue, 26 Mar 96 21:29:25 -0800

FAB: Dissipation Loss Specs

Wed, 28 Aug 96 10:54:46 CST

Re: FAB: Dissipation Loss Specs

Wed, 28 Aug 96 15:26:22 EDT

RE: FAB: Documentation for panelizing Different boards

Thu, 17 Oct 96 16:30:37 EST

Re: FAB: Double Treated Copper

Tue, 18 Jun 96 09:16:42 EST

FAB: Drill size proliferation

Mon, 29 Jul 96 16:33:54 EDT

RE: FAB: Drill size proliferation

Tue, 30 Jul 96 19:01:25 EST

RE: FAB: Drilling accuracy/repeatability

Tue, 22 Oct 96 01:00:26 EST

Re[2]: FAB: E-GLASS VS. S-GLASS

Fri, 01 Mar 96 10:20:19 EST

Re: FAB: Electroless Nickel - Immersion Gold

Sat, 13 Jul 1996 21:54:00 -0400

FAB: Electroless thickness measurements

Mon, 25 Mar 1996 10:31:32 +0500 (EST)

Re: FAB: Electroless thickness measurements

Tue, 26 Mar 1996 10:33:22 -0500

FAB: Electroless Tin

Tue, 5 Nov 1996 13:38:43 -0500

FAB: Electroless Tin

Tue, 05 Nov 96 19:24:53 EST

FAB: Electroless Tin

Tue, 5 Nov 1996 13:38:43 -0500

Re: FAB: Electroless Tin

Tue, 5 Nov 1996 19:39:51 -0500

Re: FAB: Electroless Tin

Wed, 06 Nov 96 11:12:16 EST

Re: FAB: Electroless Tin

Wed, 6 Nov 1996 23:45:02 -0500

Re: FAB: Electrolytic Tin

Tue, 18 Jun 1996 17:12:37 -0400

Re: FAB: Embedded Components

Fri, 17 May 96 01:15:25 EST

Re: FAB: ETCHBACK

Thu, 7 Nov 1996 08:25:04 -0500

FAB: etching process

Wed, 26 Jun 1996 08:54:36 -0500

Re: FAB: etching process

Wed, 26 Jun 96 11:40:01 PST

FAB: Excellon EX-300 4 Sale

Fri, 8 Nov 1996 16:47:30 -0500

FAB: Film compensation

Mon, 5 Aug 1996 15:04:39 +0400 (EDT)

Mon, 05 Aug 96 13:54:06 EST

Re: FAB: Finding a Solderpot

Tue, 06 Aug 96 14:39:58 EDT

Thu, 14 Nov 1996 16:21:59 -0500

Re: FAB: Finding a Solderpot

Thu, 14 Nov 1996 16:25:05 -0500

Re: FAB: First Article Inspection

Fri, 01 Mar 96 22:09:21 dst

FAB: follow-up on electroless thickness measurements

Mon, 1 Apr 1996 14:05:02 +0500 (EST)

Re: FAB: follow-up on electroless thickness measurements

Thu, 04 Apr 96 10:09:51 EST

FAB: follow-up on HASL cleaning inquiry

Tue, 19 Mar 1996 08:25:45 +0500 (EST)

FAB: Formula for Etching

Mon, 23 Sep 96 9:56:12 EDT

Re: FAB: Formula for Etching

Mon, 23 Sep 1996 22:45:15 -0400

Re: FAB: Fwd: Printed Circuit Board Lamination Process

Wed, 22 May 1996 17:22:18 -0400

Re: FAB: Gold Porosity Testing

Fri, 23 Aug 96 14:07:12 CDT

FAB: Green rust

Thu, 16 May 96 10:25:04 CST

Sat, 18 May 96 12:52:18 EST

Mon, 20 May 1996 11:47:29 -0400

RE: FAB: Green rust

20 May 96 14:20:58 -0500

Re: FAB: HAL for thin boards?

Thu, 23 May 1996 12:16:45 -0400

Mon, 22 Jul 96 07:13:44 EST

Re: FAB: HAL for thin boards?

Tue, 23 Jul 1996 18:36:25 -0400

Re: FAB: HASL drossing

Mon, 5 Aug 1996 13:56:18 +0400 (EDT)

Re: FAB: HASL drossing

Tue, 6 Aug 1996 14:14:06 +0400 (EDT)

RE: FAB: HASL DROSSING

Mon, 12 Aug 1996 10:25:47 EDT

Re: FAB: Heat Expansion

Wed, 26 Jun 96 12:03:57 CST

Re: FAB: Heavy Cu/Soldermask

Wed, 7 Aug 96 08:32:56 CDT

Re: FAB: hole burrs

Wed, 11 Dec 1996 23:32:41 -0700

Re[3]: FAB: hole burrs

Sat, 14 Dec 96 09:20:39 EST

FAB: Horizontal Hot Air Leveler

Fri, 15 Nov 1996 09:55:01 -0600

Re: FAB: Horizontal Hot Air Leveler

Mon, 18 Nov 1996 21:28:41 -0500

FAB: Horizontal vs. Vertical HAL

Mon, 11 Nov 1996 16:57:52 -0600

FAB: Hull cell measurements

Mon, 6 May 1996 12:00:26 +0400 (EDT)

Re: FAB: Hull cell measurements

Tue, 7 May 1996 09:12:08 -0400

Re: FAB: I24768\27

Mon, 19 Aug 96 10:05:25 PST

Re: FAB: Independent Lab for Board Residue Analysis

Thu, 12 Dec 1996 13:37:15 -0600

Re: FAB: Independent Lab for Board Residue Analysis

Fri, 13 Dec 1996 09:01:50 -0500

Re: Fab: Interconnect Failure

Tue, 19 Nov 1996 18:40:29 -0500

Re: Fab: Interconnect Failure

Wed, 20 Nov 1996 10:40:20 -0500

Re: FAB: Ionic test vs SIR

Mon, 21 Oct 1996 12:16:28 -0400

Re: FAB: Ionic test vs SIR

Thu, 24 Oct 1996 00:25:49 -0400

Re: FAB: Ionic test vs SIR

Thu, 24 Oct 1996 11:28:07 -0400

Re: FAB: IPC-SM-840

Fri, 1 Nov 1996 08:07:29 -0500

FAB: IR Pyrometer Emissivity

Wed, 13 Mar 1996 09:08:12

Re: FAB: laminate

Wed, 07 Aug 96 08:50:16 PST

Re: fab: laminate flame retardant agents

Thu, 30 May 1996 12:39:11 -0400

FAB: Laminate properties, film compensation

Wed, 14 Aug 1996 16:23:04 +0400 (EDT)

Re: FAB: Laminate properties, film compensation

Thu, 15 Aug 96 09:56:25 EDT

Re: FAB: Lamination

Mon, 16 Sep 96 07:54:22 EST

FAB: Lamination

17 Sep 96 02:27:39 EDT

Re: FAB: Lamination

Wed, 18 Sep 96 09:54:12 EDT

FAB: Large conductive areas

Tue, 10 Sep 96 07:57:17 EDT

Re: FAB: Large conductive areas

Wed, 11 Sep 96 07:42:12 EDT

Re: FAB: LPISM over Reflow Sn/Pb

Thu, 13 Jun 1996 14:23:06 -0400

Re: FAB: Manual Scrubbing prior to NiAu

Thu, 06 Jun 96 12:57:59 CDT

Re: FAB: Manual Scrubbing prior to NiAu

Tue, 11 Jun 96 18:20:09 EST

RE: FAB: Matte vs. Glossy Soldermask

Mon, 07 Oct 96 16:21:38 EST

RE: FAB: min outside radius - PWB corner

Fri, 30 Aug 96 17:11:32 EST

FAB: Mini Cards ??

Wed, 08 May 96 13:34:09 EST

Re: FAB: Mini Cards ??

Wed, 08 May 96 17:55:44 PST

FAB: MOISTURE CONTENT INNER LAYERS

Tue, 05 Nov 1996 04:40:39 EST

Re: FAB: Moisture extraction

Sun, 29 Sep 1996 13:53:04 -0400

Fab: More nailheading

Sun, 5 May 1996 13:00:53 -0400

FAB: More Pink-ring

Wed, 6 Mar 1996 21:30:06 +0100

Re: FAB: More Pink-ring

Thu, 7 Mar 1996 09:55:50 -0500

fab: mylar peeler

Wed, 22 May 96 15:38:24 PST

Fab: Nailhead/wedge voids

Mon, 6 May 1996 12:54:17 -0400

Fab: New Rigid board specs.

Tue, 3 Dec 1996 14:06:58 -0500

Re: FAB: Nozzles for Horiz. Conv.

Fri, 31 May 96 07:22:50 EST

Re: FAB: Nozzles for Horiz. Conv.

Fri, 31 May 96 15:43:36

Re: FAB: One step soldermasking to plug vias

Thu, 14 Nov 1996 21:02:39 -0600

Re: FAB: PCB Fabrication Drawing.

Fri, 10 May 96 00:18:04 EDT

FAB: PCB Materials

Tue, 2 Apr 96 10:20:09 -0800

FAB: PCB thickness

Tue, 4 Jun 1996 12:09:18 +0400 (EDT)

Re: FAB: PCB thickness

Tue, 04 Jun 96 13:42:03 CST

Re: FAB: photoresist adhesion - testing and process control

Thu, 20 Jun 1996 14:04:59 +0400 (EDT)

FAB: Post-Lam Bake

Wed, 30 Oct 96 14:10:58 MST

Re: FAB: Post-Lam Bake

Wed, 30 Oct 96 16:28:02 EST

Re: FAB: Prefered way of cutting dry film after lamination

Tue, 24 Sep 96 17:36:41 EST

Re: FAB: Prefered way of cutting dry film after lamination

Wed, 25 Sep 96 08:59:19 -0700

Fab: Printed Wiring Board Qualification

Thu, 10 Oct 1996 08:04:00 -0600

Re: Fab: Printed Wiring Board Qualification

Fri, 11 Oct 1996 10:27:48 -0400

FAB: Re Pull test SM land

Tue, 28 May 1996 19:04:16 -0400

Fab: Re: breakout testing

Fri, 10 May 1996 14:21:18 -0400

Re: FAB: Re: Controlled Impedance - Dielectric Constant- Comment

Tue, 21 May 1996 13:33:55 -0400

FAb: Re: filled buried vias

Sun, 16 Jun 1996 17:15:33 -0400

Fab: Re: Laminate voids

Mon, 27 May 1996 18:09:15 -0400

Fab: Re: Laminate voids

28 May 96 09:31:02 EDT

FAB: RE: X-outs on panels

Tue, 30 Jul 96 19:22:44 EST

Fab: Re:Negative etchback

Thu, 23 May 1996 11:37:04 -0400

Fab: Re; More on tin plate

Sat, 22 Jun 1996 13:21:25 -0400

FAB: Reject Identification

Wed, 02 Oct 1996 08:43:00 -0600

FAB: Request water jet cutting info -3/19 message resend.

Thu, 21 Mar 96 08:46:22 PST

FAB: Resin Coated Cu - Tech Ques's & Availability

Mon, 20 May 1996 12:01:56 -0400

Wed, 31 Jul 96 08:07:32 EDT

Thu, 1 Aug 1996 18:24:56 -0400

Fri, 2 Aug 1996 15:08:07 -0400

Re[2]: FAB: Resist Lamination

Fri, 2 Aug 1996 15:13:13 -0400

Mon, 05 Aug 96 08:24:16 EST

FAB: RFI/EMI Vias

Thu, 23 May 96 15:22:34 EST

Re: FAB: RFI/EMI Vias

Thu, 23 May 96 19:44:01 CST

Fri, 24 May 96 10:23:57 CST

RE: FAB: seek for powerful strike on customers who don't rea

Fri, 24 May 96 06:56:02 EST

FAB: Rogers R4003

Thu, 21 Nov 1996 09:59:03 -0500

Tue, 22 Oct 96 00:59:27 EST

Re: RE: FAB: Silk-screen (give them up)

Fri, 31 May 96 00:37:18 EDT

FAB: Silk-screen ink on surface mount pads

Tue, 28 May 1996 08:42:53 +0400 (EDT)

RE: FAB: Silk-screen ink on surface mount pads

29 May 1996 08:12:34 CDT

Thu, 30 May 96 19:30:17 EST

RE: FAB: Silk-screen ink on surface mount pads

Fri, 31 May 1996 08:15:40 -0400

Re[2]: FAB: Silk-screen ink on surface mount pads

Fri, 31 May 96 08:26:51 CST

Re[2]: FAB: Silk-screen ink on surface mount pads

Fri, 31 May 96 10:01:52 EST

Re: FAB: Silver Decoration Solution

Thu, 23 May 1996 23:25:25 -0400

Re: FAB: Silver Decoration Solution

Fri, 24 May 1996 00:46:48 -0400

FAB: Single Ply B-stage Use

Wed, 27 Mar 1996 11:30:13 -0500

FAB: Solder plated shields

Wed, 31 Jul 96 08:16:23 +0200

Re: FAB: Soldermask Clearance and Web Width requirements

Wed, 31 Jul 96 14:59:34 +0200

fab: Solderability

Thu, 10 Oct 1996 15:59:58 -0500

Re: fab: Solderability

Fri, 11 Oct 1996 10:24:02 -0400

fab: Solderability

Mon, 14 Oct 96 12:59:34 EDT

fab: Solderability

Thu, 10 Oct 1996 15:59:58 -0500

Mon, 13 May 96 12:51:07 EST

Re[2]: FAB: soldermask plugged vias

Tue, 23 Jul 96 18:05:51 CST

FAB: SPC of printer

Thu, 26 Sep 1996 09:28:15 +0400 (EDT)

Re[2]: FAB: SPC of printer

Mon, 30 Sep 96 15:41:55 PST

FAB: SPC of printers

Wed, 2 Oct 1996 15:54:08 +0400 (EDT)

Re: FAB: Tank Liners (CoreSeal)

Thu, 22 Aug 96 18:35:03 EST

RE: FAB: Thickness of copper on PCB

Wed, 26 Jun 96 15:43:35 EST

Re: FAB: Tin Lead etch resists (fwd)

Sat, 26 Oct 1996 18:50:50 -0400

FAB: To Drilling Proc Engineers & "Experts"

Fri, 1 Nov 1996 23:11:43 -0500

FAB: to etch chrome but not copper

Thu, 1 Aug 96 13:26:45 EDT

Fab: Ultrasonic Flood Modules for Conveyorized Equipment

Mon, 17 Jun 96 16:56:28 EST

Re: Fab: Ultrasonic Flood Modules for Conveyorized Equipment

Tue, 18 Jun 1996 02:42:33 -0400

Re: Fab: Ultrasonic Flood Modules for Conveyorized Equipment

Thu, 20 Jun 1996 17:44:39 -0400

Re: FAB: Use of MEK

Thu, 25 Jul 96 14:00:53 EST

Re: FAB: Use of MEK

Fri, 26 Jul 1996 01:00:52 -0400

Re: FAB: Use of MEK

Fri, 26 Jul 1996 18:50:26 -0400

Re: Fab: Using Amonia (NH3) Gas for Plasma Etching

Tue, 17 Sep 96 08:07:56 PST

RE: FAB: Via Size

Fri, 13 Sep 96 12:55:54 EST

FAB: Wire-bondable gold

Wed, 13 Nov 1996 22:16:07 -0500

FAB: Wire-bondable gold

Thu, 14 Nov 96 09:02:43 EST

FAB: Wire-bondable gold

Wed, 13 Nov 1996 22:16:07 -0500

FAB:ASSY:pad spacing

Thu, 18 Apr 1996 19:07:05 -0500

Re: FAB:ASSY:pad spacing

Fri, 19 Apr 96 08:16:08 CST

FAB:ASSY:pad spacing

Fri, 19 Apr 96 16:27:44 EST

Re: FAB:BURNS FROM SHORTS

Mon, 13 May 1996 10:18:40 -0400

Re: FAB:BURNS FROM SHORTS

Mon, 13 May 96 09:53:01 CST

Re: FAB:Cupric Chloride Etchant

Tue, 13 Aug 1996 22:44:29 -0400

Fab:CyanateEster.

Wed, 24 Apr 96 12:53:25 PST

FAB:direct plate

Tue, 2 Jul 1996 10:45:30 -0400

Re: FAB:Electroless Ni/Immersion Au & press-fit connectors

Fri, 22 Nov 96 08:50:21 EST

FAB:electroless nickel-immersion gold

Mon, 15 Jul 96 14:11:01 EDT

Re: FAB:haloing

Thu, 06 Jun 96 08:53:36 EST

Re: FAB:haloing

Mon, 10 Jun 96 13:18:27 PST

Re: FAB:Open Vias Problem

Fri, 17 May 96 14:46:06 EST

FAB:peelable soldermask

Wed, 21 Aug 96 12:00:09 CDT

Re: FAB:peelable soldermask

Wed, 21 Aug 1996 22:24:25 -0400

FAB:Program to calculate controlled impedance

Tue, 16 Jul 1996 11:22:49 -0400

FAB:Questions about pink-ring

Sun, 3 Mar 1996 17:52:40 +0100

Re: FAB:Questions about pink-ring

Mon, 4 Mar 1996 10:44:18 -0500

Fab:Re: Breakout at innerconnect

Wed, 8 May 1996 16:42:40 -0400

Fab:Re: Crossplying lamination

Sun, 16 Jun 1996 17:15:13 -0400

Re: Fab:Re: Crossplying lamination

Mon, 17 Jun 96 07:58:37 EST

Fab:Re: Ionic Contamination

Tue, 30 Jul 1996 16:15:15 -0400

re: FAB:Single Glass Layer Core Material (FR4)

Mon, 9 Dec 96 13:03:51 PST

Re: FAB:Single Glass Layer Core Material (FR4)

Thu, 12 Dec 1996 23:44:32 -0500

Re[3]: FAB:Wire Bonding

Thu, 17 Oct 96 12:01:42 EST

Fab; Re; 2 oz copper boards

Fri, 10 May 1996 14:21:21 -0400

Fabrication

Mon, 20 May 96 15:36:20 EDT

Wed, 04 Sep 96 17:00:18 EST

re: Fabrication

18 SEP 96 09:41:27 EDT

Fabrication

Fri, 01 Nov 96 05:38:37 EST

Fabrication

Mon, 09 Dec 96 09:53:59 EST

Fatigue resistant high temp solder

Tue, 10 Dec 1996 22:05:25 -0500

Fabrication/Repair

Wed, 11 Dec 96 21:20:35 EST

Family tree of IPC Specs

Tue, 13 Aug 1996 07:23:06 -0400

Sun, 17 Nov 1996 13:39:43 -0500

Re: Fatigue resistant high temp solder

Mon, 18 Nov 1996 12:52:28 -0500

Re: Fault finding on test vehicles

Tue, 13 Aug 1996 14:44:24 +0400 (EDT)

Fault finding on test vehicles

Wed, 14 Aug 96 11:36:15 EDT

FIber Optic Handling

Fri, 14 Jun 1996 06:30:00 +0000

Field Return Relaibility Data

Fri, 19 Apr 1996 18:55:33 -0400

Re: Field Return Relaibility Data

Mon, 22 Apr 1996 09:59:33 -0400

Filleting of via pads

Fri, 15 Mar 1996 09:01:33 -0800

Filling via holes with Cu loaded epoxy

Mon, 23 Dec 1996 14:18:40 -0500

flatness affected by build-up?

Thu, 15 Feb 96 11:14:11 CST

Re: flatness affected by build-up?

Mon, 19 Feb 96 11:34:29 EST

Re: Flex and Entek

Sun, 4 Feb 1996 16:00:18 -0500

Re: Flex and Entek

Sun, 4 Feb 1996 20:34:00 -0500

flex drilling information

Thu, 22 Aug 1996 09:11:22 -0700

Re: flexible circuit

Wed, 18 Dec 96 08:27:33 EST

Re: flexible circuit

Wed, 18 Dec 1996 18:24:05 -0500

Re: flexible circuit

Thu, 19 Dec 1996 17:29:42 -0500

Flexible circuit manufacturing

23 JUL 96 11:57:24 EDT

Flip chip bumping alternative

Thu, 28 Nov 1996 10:45:46 +0000

Re: Floor coating for screening

Fri, 14 Jun 96 13:43:12

Re: Fluid Dynamics

Wed, 13 Mar 1996 16:22:31 -0500

Flux

Tue, 3 Sep 96 12:47:46 +0200

Re: Flux - Fumes

Fri, 13 Sep 1996 09:10:44 -0600

Re: Flux complinace to J-Std-001A

Sun, 29 Sep 1996 23:17:05 -0400

Flux contamination in Pentium Socket

Tue, 7 May 1996 01:21:12 -0400

Re: Flux contamination in Pentium Socket

Wed, 8 May 1996 10:09:41 -0400

Flux fumes

13 SEP 96 08:11:43 EDT

Flying probe testing

Thu, 26 Sep 1996 10:39:04 -0400

Re: Footprint Pattern

Wed, 17 Jan 96 11:58:58 PST

for Bab-Hui Lee %P influence on solderability

Tue, 16 Jul 96 11:01:12 EDT

for ipcTechNET -FABRICATION AND ASSEMBLY

Thu, 26 Dec 96 16:43:54 PST

Forms

Fri, 12 Jan 96 15:06:58 EST

Forwarded massage

Wed, 3 Jul 1996 09:15:25 -0500 (CDT)

Forwarded massage

Wed, 3 Jul 1996 09:15:25 -0500 (CDT)

forwarded massage

Wed, 3 Jul 1996 09:17:14 -0500 (CDT)

FR-1 - Paper Phenolic Materials

Mon, 25 Nov 96 16:50:38 -0800

Fri, 18 Oct 96 16:19:53 -0700

21 Oct 1996 08:53:17 CDT

Mon, 21 Oct 96 16:21:13 -0700

Tue, 22 Oct 1996 23:16:51 -0400

Re: FWD>assy: hot bar solder jo

Wed, 23 Oct 96 09:30:12 -0700

FR5 LAMINATE FOR PCB

12 Jan 1996 09:59:51 -0400

Free Technical Seminar

Fri, 26 Jan 1996 10:35:45 -0500

Re: Fungal contamination

Wed, 14 Feb 96 09:23:14 EST

Fungal Contamination

Wed, 14 Feb 1996 22:37:51 -0500 (EST)

Re: Fungal contamination

Sat, 17 Feb 1996 13:03:18 -0500

Re: Fungal contamination

Mon, 19 Feb 96 11:56:50 EST

Thu, 11 Jul 96 07:43:04 CST

re: FWD>FAB- Etchback (PB Etching)

Fri, 26 Jul 96 15:41:56 EDT

Re: FWD>FAB- MEASURING DEVICE F

Fri, 03 May 96 12:03:53 EST

Re[2]: FWD>Laminate Voids

Fri, 24 May 96 12:33:30 PST

Re: FWD>RE>ASSY revision J-STD-

Thu, 18 Jul 96 12:11:14 EDT

RE: FWD>RE>Haloing and Pinkling

Mon, 25 Mar 96 21:51:04 EST

Re: FWD>RE>Placement of bypass

Mon, 8 Apr 1996 11:46:26 -0400

Galvanic Corrosion

Tue, 12 Nov 96 16:50:55 CST

Gelatinous residue on High Tg Material

Thu, 27 Jun 96 19:01 EST

RE: Gen - Job postings

Thu, 07 Nov 96 18:48:27 EST

GEN / FAB: Impedance Testing Services

Fri, 20 Sep 1996 11:12:30 -0400

Re: Gen : SMT design/process issues

Tue, 19 Nov 1996 10:14:39 -0500

GEN: A Contract Assemblers Happy New Year...

Tue, 31 Dec 96 13:07:50

GEN: Adhesives

Fri, 7 Jun 1996 13:47:21 -0400

Re: GEN: Adhesives

Mon, 10 Jun 1996 13:28:56 -0400

Re: GEN: Advice on Process Control

Tue, 23 Apr 1996 11:01:23 -0400

Re: GEN: Advice on Process Control

Tue, 23 Apr 1996 11:01:23 -0400

Re: GEN: Apology....and then some.

Tue, 7 May 1996 22:12:31 -0400

Re: GEN: Apology....and then some.

Wed, 8 May 1996 22:52:30 -0400

Re[2]: GEN: Blind via Fill

Fri, 06 Dec 96 18:15:56 EST

Fwd: GEN: Blind via Fill

Sun, 8 Dec 1996 21:32:35 -0500

GEN: CAD TO GERBER CONVERSION

Tue, 01 Oct 1996 12:46:59 -0400

Re: GEN: Carbon Ink vs. Gold Reliability

Tue, 16 Jul 1996 20:12:18 -0400

GEN: Condor Fan Club

Mon, 30 Dec 1996 07:35:41 -0500

GEN: Cu component leads

Tue, 14 May 1996 18:47:45 -0500

Re: GEN: Doggerel

Mon, 16 Dec 96 14:17:45

Re: GEN: Doggerel

Tue, 17 Dec 1996 13:59:13 -0500

GEN: Dream a Little Dream

Sun, 29 Dec 1996 10:32:32 -0500

RE(2): GEN: Dream a Little Dream

Sun, 29 Dec 1996 17:37:51 -0500

Re: GEN: Dream a Little Dream

Mon, 30 Dec 1996 11:10:24 -0500

GEN: Electronic Component Packaging Specs.

Wed, 07 Aug 96 10:26:41

Re: GEN: Electronic Component Packaging Specs.

Wed, 7 Aug 96 09:33:05 EDT

GEN: Electrowinning Units

Sun, 29 Dec 1996 09:50:33 -0500

GEN: Employment Opportunity -- PACE Inc.

Tue, 9 Apr 1996 16:02:53 -0400

GEN: Employment; CAD/CAM operator

Thu, 12 Sep 1996 12:41:33 -0400

GEN: Enough is enough

Thu, 19 Sep 96 17:20:48 EST

Re: GEN: ESD FLOORING -Reply

Thu, 17 Oct 1996 09:13:15 -0400

GEN: ETCH 5/5 and 6/6

Thu, 12 Dec 1996 14:01:25 -0600

Re: GEN: Heard of Interconnect Stress Testing (IST)?

Mon, 18 Nov 1996 19:15:46 -0500

Re: GEN: Heard of Interconnect Stress Testing (IST)?

Tue, 19 Nov 1996 00:06:06 -0500

Re: GEN: Heard of Interconnect Stress Testing (IST)?

Thu, 21 Nov 1996 15:39:52 -0500

re: GEN: Inappropriate Email

Sun, 4 Aug 1996 13:42:11 -0400

Re: GEN: IPC Chapter In The Boston Area

Fri, 31 May 96 15:52:14 EDT

GEN: IPC DC Chesapeake Chapter Meeting May 20, 1996 RSVP

Mon, 13 May 96 14:39:35 EST

GEN: ISO-9000 the next step?

Thu, 10 Oct 96 20:22:16 EDT

Wed, 6 Nov 1996 11:45:34 -0500

Wed, 6 Nov 1996 15:34:58 -0500

Re: GEN: Masking switches during Cleaning

Fri, 8 Nov 1996 20:23:16 -0500

Tue, 2 Jul 1996 13:28:53 -0400

Re: GEN: Masking switches during Cleaning

Tue, 2 Jul 1996 20:00:35 -0400

GEN: MEASLING

Tue, 31 Dec 1996 20:01:53 -0500

Gen: Metallurgist Reqd in UK

Fri, 12 Jul 96 10:50:30

GEN: MIL-HDBK-217

Tue, 04 Jun 1996 11:46:00 +0000

GEN: PACKAGING

Tue, 2 Apr 96 14:52:23 EST

GEN: PCB sales distribution

Fri, 27 Dec 1996 18:27:33 -0500

Re: GEN: Persulfate / Sulfuric Baths

Mon, 9 Dec 1996 00:12:13 -0500

Re[2]: GEN: Persulfate / Sulfuric Baths

Mon, 09 Dec 96 12:36:43 PST8

Re: GEN: Persulfate / Sulfuric Baths

Wed, 11 Dec 1996 10:04:20 -0500

GEN: Phone Number

Fri, 9 Aug 1996 14:31:24 -0600

GEN: Process Qualification

Wed, 31 Jul 1996 08:49:59 -0400

GEN: Re: Help with MODEM INFO

Fri, 17 May 96 10:13:55 CST

GEN: Shipping/Transportation for Electronic Components

Fri, 20 Dec 96 13:53:41 CST

GEN: Resist Strip

Fri, 27 Dec 1996 18:21:39 -0500

Re: GEN: Resist Strip

Sat, 28 Dec 1996 12:42:09 -0500

Re: GEN: Resist Strip

Sat, 28 Dec 1996 13:52:16 -0500

Thu, 19 Dec 1996 11:01:39 -0600

Re: GEN: SOLDER IN LEAD BEND

Fri, 8 Nov 1996 12:27:38 -0500

GEN: Solderability and Accelerated aging

Thu, 31 Oct 1996 14:44:07 -0600

RE: GEN: Spec on CD

Fri, 31 May 96 07:35:30 EDT

Re: Gen: Surplus SMT Equipment Seller

Tue, 31 Dec 1996 11:01:17 -0500

Re: GEN: Trade Show Proceedings

Wed, 01 May 96 10:27:28 PST

Re: GEN: When is Nepcon '97

Thu, 31 Oct 96 14:46:22 EST

GEN: WHO IS CONDOR?

Tue, 31 Dec 1996 20:17:06 -0500

gen:address of dow corning

17 Oct 96 16:15 GMT+0500

Gen:Help Wanted

Mon, 29 Jul 1996 15:53:09 -0400

GEN:measles chart

Thu, 6 Jun 1996 04:59:42 -0400

GEN:measles chart

Thu, 6 Jun 1996 04:59:32 -0400

General: Digital Camera's...

Tue, 17 Dec 96 18:37:45

Wed, 18 Dec 96 08:23:52 CST

GENL: Managing high volume email traffic.

Wed, 18 Dec 1996 11:36:11 -0500

Tue, 16 Apr 96 09:18:01 PST

German-English Dictionary

Tue, 23 Jan 96 17:16:47 EST

Getek laminate

Tue, 08 Oct 1996 06:40:25 EDT

GETEX

Fri, 25 Oct 96 07:04:00 EDT

Gigahertz

Thu, 5 Sep 1996 21:12:06 -0400

RE: Re: Glue (#613072)

Thu, 10 OCT 96 16:44:45 MDT

Re: Glue and Fine Pitch Devices

Tue, 27 Aug 1996 09:02:45 -0400

FWD: gold

Thu, 9 May 1996 15:48:39 -0600

Re: gold finger porosity requirements

Thu, 6 Jun 1996 12:34:52 -0400

gold finger thickness/porosity

Wed, 5 Jun 96 16:16:50 EDT

Re: Gold Flash on PWB's

Wed, 24 Apr 96 08:01:25 CST

FWD: Re: Gold Flash on PWB's

Wed, 24 Apr 1996 07:53:41 -0600

Re: Gold Migration into Tin/Lead

Mon, 2 Dec 96 12:17:48 CST

gold plating

Wed, 12 Jun 96 10:17:49 EDT

Re: gold plating

Wed, 12 Jun 96 12:19:58 PST

gold plating problem

Wed, 24 Apr 96 19:07:53 EST

Gold Plating Specs and other information

Wed, 5 Jun 1996 14:44:54 -0400

Gold Plating Specs and other information

Wed, 5 Jun 1996 14:44:54 -0400

re: gold porosity testing

Thu, 19 Dec 96 15:54:51 PST

goldfinish on PC boards

Mon, 04 Nov 96 18:42:09 EST

goldfinish on PC boards

Mon, 04 Nov 96 20:52:28 EST

Re: goldfinish on PC boards

Tue, 5 Nov 1996 09:13:29 -0500

Re: goldfinish on PC boards

Tue, 5 Nov 1996 08:58:23 -0600

GoodBye John Gully

Fri, 4 Oct 1996 18:06:34 -0400

Greetings from San Diego

Fri, 8 Mar 96 17:40 PST

GUIDELINES FOR LAYING OUT OF STENCIL DEVELOPED BY MARTHA OF AMP Inc.

16 Dec 96 19:41 GMT+0500

GUIDELINES FOR LAYING OUT OF STENCIL DEVELOPED BY MARTHA OF AMP Inc.

16 Dec 96 19:41 GMT+0500

Re: FW: Half ounce internals

Sat, 17 Feb 96 13:52:23 EST

re: Haloing and Pinkling

Mon, 25 Mar 96 8:12:30 PST

re: Handling Guidelines for Fine pitch Components

Thu, 28 Mar 96 16:09:56 PST

HARDWARE LOOSENING AFTER WAVE SOLDER

Wed, 16 Oct 1996 12:47:32 -0500 (EST)

Fwd: HARDWARE LOOSENING AFTER WAVE SOLDER

Wed, 16 Oct 1996 20:44:37 -0700

Re: HASL Microetch

Thu, 26 Sep 96 13:30:36 CDT

Re: HASL Microetch, and preclean.

Sun, 29 Sep 1996 23:31:22 -0400

Re: HASL Microetch, and preclean.

Tue, 1 Oct 1996 03:19:22 -0400

RE: HASL Post Cleaning

Tue, 19 Mar 1996 08:51:29

Re[2]: HASL Post Cleaning

Thu, 21 Mar 96 07:21:20 EST

RE: HASL Surface Tolerance

Mon, 23 Dec 1996 11:42:28 -0500

HAST

Tue, 09 Jul 1996 04:19:53 EDT

Re: HAST

Wed, 10 Jul 1996 13:40:16 -0400

Fri, 22 Nov 1996 12:24:21 -0500

Re: Hey, where's everybody?

Sun, 24 Nov 1996 18:10:53 -0500

Re: Heavy Copper

Wed, 14 Aug 1996 07:14:33 -0400

HEAVY COPPER

Fri, 16 Aug 1996 11:58:30 EDT

Hey, where's everybody?

Mon, 23 Dec 96 10:46:51

Mon, 30 Dec 1996 14:59:29 -0500

Re: Re[2]: Hey, where's everybody?

Tue, 31 Dec 1996 08:48:09 -0500

RE: HI pot between surface features.

Wed, 7 Feb 96 08:28:54 EST

Re: Re:High aspect Ratio Holes

Tue, 17 Dec 1996 16:33:48 -0500

Re: High Temp PCB

Mon, 24 Jun 96 07:59:55 CST

Re: High Temp PCB

Mon, 24 Jun 1996 14:46:03 -0400

Hole breakout - request for opinions/assistance

Wed, 08 May 96 12:44:49

Re: Holiday Gift

Mon, 16 Dec 96 12:12:45

Re: HOT BAR SUMMARY

Fri, 21 Jun 96 15:46:50 CST

Fwd:HOT ONE, JUST CAME IN!!!!!!!!

Mon, 11 Mar 96 14:03:10 PST

Re: HS codes

Thu, 8 Aug 1996 17:20:39 -0600

Humidity Sensitive Devices

Wed, 15 May 96 15:31:37

Re: Humidity Sensitive parts

Fri, 10 May 1996 10:40:05 -0400

Re: Humidity Sensitive parts

Fri, 10 May 1996 10:40:09 -0400

Re: Humidity Sensitive parts -Reply

Mon, 13 May 1996 02:13:04 -0400

Re: Humidity Testing

Wed, 10 Jul 1996 17:12:07 -0400

Re: Hydro-squeegee Process?

Tue, 10 Dec 96 09:16:49

IEC 297-3

Wed, 17 Jul 1996 09:31:59 -0400

IEEE Electronic Packaging Workshop

Mon, 29 Jan 96 08:50:05 CST

Re: IEEE Electronic Packaging Workshop

Mon, 29 Jan 1996 10:20:16 -0600

Re: Immersion Au/electrolessNi

Wed, 17 Jul 1996 18:24:57 -0400

Re: immersion/electroless tin plating

Wed, 31 Jul 1996 09:31:56 -0400

Impedance Spectroscopy

Tue, 3 Dec 1996 14:43:07 -0500

Re: In search of Delta Circuits

Wed, 10 Jul 1996 15:37:35 -0400

Re: In search of High Tec PCB Manufacturer for PTFE Material

Wed, 27 Nov 1996 10:11:45 -0500

Re: In search of High Tec PCB Manufacturer for PTFE Material

Fri, 13 Dec 96 12:36:27 EST

In-process Test coupons

Wed, 8 May 96 18:22 EST

Re: In-process Test coupons

Thu, 09 May 96 10:12:15 EST

Re: indium oxide conductors

Fri, 19 Apr 1996 10:08:59 -0400

re: Industrial Instruments

Thu, 12 Dec 96 12:57:21 PST

Info on IPC standards

Tue, 22 Oct 1996 17:28:00 -0800 (PST)

Re: Info on PADS

Mon, 22 Jul 96 10:02:46 PST

Information requested

Tue, 10 Sep 1996 10:51:31 -0400

Ink preparation

Thu, 02 May 96 17:52:05 EST

Re: FW: Ink preparation mixing bubbles

Wed, 08 May 96 17:02:58

Inkjet board marking

Fri, 26 Jan 96 14:00:29 dst

re: Inkjet board marking

Sun, 28 Jan 96 13:51:14 PST

Re: Inner layer PAD Suppression or NOT?

Thu, 26 Sep 1996 10:41:31 -0400

re: Inner layer PAD Suppression or NOT?

Thu, 26 Sep 96 16:22:58 EDT

Re[2]: Inner layer PAD Suppression or NOT?

Thu, 26 Sep 96 14:26:57 MST

RE: Innerlayer defects.

Thu, 5 Sep 96 14:52:33 MET DST

Re: INSPECTION Internal Solder Joint

Wed, 31 Jul 96 16:45:49 PST

Re[2]: INSPECTION Internal Solder Joint

Thu, 1 Aug 1996 09:24:04 -0700

Re: Re[2]: INSPECTION Internal Solder Joint

Tue, 6 Aug 1996 01:30:44 -0400

Re: inspection lighting

Mon, 12 Aug 1996 14:59:47 +0400 (EDT)

re: Inspection of PCB's

Fri, 19 Jan 96 15:32:36 PST

Insulating layer

Fri, 1 Nov 1996 07:32:01 -0500

INSULATING LAYER

Fri, 01 Nov 1996 14:53:04 EST

Re: INSULATING LAYER

Tue, 5 Nov 1996 15:19:21 -0500

Mon, 18 Nov 1996 10:27:29 -0500

RE: Interconnect Failure

Mon, 18 Nov 1996 10:35:48 -0600

Mon, 18 Nov 1996 12:52:35 -0500

Tue, 19 Nov 1996 00:06:09 -0500

Re: Internal and external ground planes

Tue, 19 Nov 1996 11:06:43 -0500

Interest in SIR Workshop

Tue, 10 Dec 1996 09:29:52 -0500

Re[2]: Intermetalic

Sun, 30 Mar 96 14:45:56 CST

Wed, 23 Oct 1996 08:07:32 -0400

Re[3]: Internal and external ground planes

Wed, 23 Oct 1996 12:21:44 -0400

Re: Internal and external ground planes

Wed, 23 Oct 96 09:52:23 -0700

Re[2]: Internal and external ground planes

Thu, 24 Oct 1996 08:47:42 -0400

Re: Internal Conductor Widths

Sat, 21 Dec 1996 08:35:39 -0500

Re: Internal Conductor Widths

Tue, 24 Dec 1996 13:53:27 -0500

Re: International Conference on Electronic Assembly: Materi

Thu, 18 Apr 96 08:08:40 EST

Re: Internet Virus

Thu, 19 Sep 1996 10:24:48 -0400

Re: Interpretation of Para 4.6.1 of Mil-P-55110E AM1.

Sun, 25 Aug 1996 10:53:40 -0400

Re: Ionic Contamination-The Presence of Sodium and Chlorine

Sun, 17 Nov 1996 11:54:36 -0500

RE: Ionic Contamination-The Presence of Sodium and Chlorine

Mon, 18 Nov 96 18:54:51 EST

IPC Artwork for SMT Testing

Fri, 7 Jun 1996 10:42:12 -0400

IPC Designer Council Chesapeake Chapter January Meeting

Tue, 02 Jan 96 16:35:52 EST

IPC DESIGNERS COUNCIL CHESAPEAKE CHAPTER 4/15/96 MEETING

Mon, 08 Apr 96 20:04:13 EST

IPC Designers Council Chesapeake Chapter Meeting 2/20/96

Tue, 13 Feb 96 10:20:57 EST

IPC Designers Council Chesapeake Chapter Meetings

Fri, 12 Jan 96 16:20:26 EST

IPC Designers Council Chesapeake Chapter Meetings

Mon, 15 Jan 96 08:32:39 EST

Re: IPC Documents

Sat, 20 Jan 1996 11:03:23 -0500

IPC Lab List

Fri, 27 Dec 96 16:15:54 MDT

IPC requirements for clinched leads

4 NOV 96 14:46:19 EST

re: IPC spec IPC-A-600D

Wed, 21 Feb 96 11:44:11 PST

IPC specs for e'less Ni/imm Au

24 Apr 96 20:54:17 -0500

Re: IPC Test Procedure (fwd)

Thu, 8 Feb 1996 23:14:34 -0500

Re: IPC-A-610

Thu, 28 Mar 96 07:35:56 CST

Re: IPC-A-610

Wed, 20 Nov 1996 15:43:23 -0500

Re: IPC-A-610

Wed, 20 Nov 96 16:57:53 PST

Re: IPC-D-275

Fri, 13 Dec 1996 10:44:09 -0500

IPC-D-275 vs IPC-RB-276

Tue, 26 Nov 1996 09:02:16 -0500

Re: IPC-D-275 vs IPC-RB-276

Tue, 26 Nov 1996 12:42:11 -0500

IPC-D-350

Thu, 11 Apr 1996 10:06:00 -0400

IPC-D-356

Fri, 29 Mar 96 17:44:10 CST

re: IPC-TM-650 - need clarification of 2.4.22

Fri, 22 Nov 96 11:27:47 PST

ISO standards

25 Jun 96 13:34:31 -0500

ISO9000 PCB Shops

Wed, 21 Feb 96 08:30:51 EST

Re: ISO9000 PCB Shops

Wed, 21 Feb 96 10:02:36 EST

Re: It works! (fwd)

Thu, 12 Dec 1996 08:46:52 -0500

Re: J-STD-001A Appendix D/SIR Testing

Fri, 22 Nov 1996 16:21:21 -0500

Re: J-Std-001A Testing

Thu, 1 Aug 1996 15:16:56 -0400

Re: J-Std-001B work cell touchup

Thu, 09 May 96 16:19:27 PST

Re: J-Std-001B work cell touchup

Thu, 09 May 96 15:41:41 PST

Re: J-Std-001B work cell touchup

Fri, 10 May 1996 12:54:12 +0000

re: JEDEC Testing Specifications

Thu, 11 Jul 96 16:39:41 PDT

Re: JEDEC: where are they?

Tue, 27 Feb 96 06:45:42 PST

Job offer

Wed, 30 Oct 96 07:27:34 EST

job oppertunities

Thu, 11 Jan 1996 21:41:11 -0500

Job opportunity

Wed, 9 Oct 1996 18:39:14 -0400

Job Opportunity - Maryland

Thu, 17 Oct 96 18:29:27 EST

Job Postings

Wed, 6 Nov 96 15:14:00 EST

KJB electronics Ohio

Tue, 26 Nov 1996 07:41:50 EST

Re: re: Label Printing

Wed, 11 Dec 1996 16:13:59 -0700

Re: re: Label Printing

Wed, 11 Dec 1996 19:36:40 -0700

Re[3]: Label Printing

Thu, 12 Dec 96 12:21:17 EST

Lables for Card Assemblies

Thu, 10 Oct 96 12:26:51 EDT

Re: Laminate Shrinkage

Fri, 10 May 96 09:56:45 EST

Laminate Voids

Thu, 23 May 96 12:27:03 PST

Re: largest circuit board holes allowable...

Sun, 6 Oct 1996 23:57:08 -0400

Latest Revision of the EIA-481 Spec.

Thu, 29 Feb 1996 09:33 -0500 (EST)

Re[2]: Latest Revision of the EIA-481 Spec.

Fri, 01 Mar 1996 14:10 -0500 (EST)

Re[3]: Latest Revision of the EIA-481 Spec. -Reply

Fri, 01 Mar 1996 16:46 -0500 (EST)

layout tools

Thu, 3 Oct 1996 08:44:37 -0700 (MST)

Re: Liability

Wed, 26 Jun 1996 08:45:45 -0700

Re: Liability

Thu, 27 Jun 1996 15:13:35

Re:lifted lands

Wed, 17 Jul 1996 18:24:32 -0400

Lightbeam soldering systems

Wed, 14 Aug 1996 15:16:24 -0700

re: Lightbeam soldering systems

3 OCT 96 08:12:47 EDT

Re: Lightbeam soldering systems

Wed, 27 Nov 96 15:22:28 PST

Re: Lightbeam soldering systems

Wed, 27 Nov 1996 23:26:40 -0800

Re: Liquid resists

Thu, 8 Aug 1996 22:25:15 -0400

Re: Liquid resists

Mon, 12 Aug 1996 04:46:24 GMT

List of IPC Specs

Wed, 11 Sep 96 11:58:54 EDT

Lohr and Herrmann

Thu, 12 Sep 96 12:38:39 EST

LOHR AND HERRMANN

Thu, 12 Sep 1996 03:53:09 EDT

Long Term Storage of PCB's

16 Nov 1996 09:15:09 CST

Re: long-term storage of DIPs

Thu, 15 Feb 96 15:01:48 PST

Looking for a contact at the Bureau of Engraving

Thu, 15 Feb 1996 15:57:52 -0500

Re: Looking for a contact at the Bureau of Engraving

Fri, 16 Feb 1996 13:29:37 -0500

RE: Looking for Impedance Software

Mon, 29 Apr 1996 13:19:34 +0100

Re: LPI and Via Entrapment

Fri, 28 Jun 1996 14:27:08 -0400

LPISM Residue

Fri, 10 May 96 12:54:12 EST

Re: major causes of tombstoning

Mon, 12 Feb 96 13:23:44 -0100

RE:Marking

Wednesday, 18 December 1996 11:49am ET

Re: MArking

Wed, 18 Dec 96 16:47:58 EST

Mass Microvia Formation

Tue, 22 Oct 96 11:56:04 EST

Masslam,V-cut

Wed, 10 Apr 96 12:46:07 EST

Mating connectors for IPC B36 and B25A Test Coupons

Wed, 11 Dec 96 12:17:00 EST

Re: Mating connectors for IPC B36 and B25A Test Coupons

Thu, 12 Dec 1996 08:46:50 -0500

Re: matrix trays - recycle?

Tue, 10 Sep 1996 10:12:21 -0600

RE: Re: matrix trays - recycle? (#667790)

Tue, 10 SEP 96 10:06:43 MDT

Max op temp

04 Sep 96 16:16:00 EDT

Re: Mechanical Scrub

Sun, 21 Apr 1996 19:54:07 -0400

Re: Mechanical Scrub

Sun, 21 Apr 1996 23:11:50 -0400

meniscograph reply - hey Dave Hillman

Wed, 29 May 1996 9:07:53 -0400 (EDT)

MeniscusBlockage

Tue, 12 Nov 1996 10:54:00 +0000

Re: MeniscusBlockage

Thu, 14 Nov 1996 12:57:00 +0000

Microsectioning Equipment

Mon, 9 Sep 96 13:15:10 CDT

Re: microsections

Mon, 30 Sep 1996 16:29:36 -0400

Re: Microvias and Additive Technology

Fri, 9 Feb 1996 15:57:44 -0500

Re: Microvias and Additive Technology

Tue, 13 Feb 1996 05:41:15 -0500

Re: Microvias and Additive Technology

Tue, 13 Feb 1996 05:41:15 -0500

Re: Mil-Spec surface mount chip resistor arrays

Thu, 5 Sep 1996 14:50:41 -0400

Re: Mild humor: RE: Walmart Supplies

Thu, 26 Sep 1996 10:55:43 -0400

Re: Military spec interpretation

Tue, 27 Aug 96 11:28:06 EST

Re: Military spec interpretation

Tue, 27 Aug 1996 15:12:10 -0400

Re: Military Specification Sheet

Thu, 12 Sep 1996 11:30:33 -0400

Min. line width and spacing

Mon, 12 Aug 1996 11:47:09 -0400

MITSUBISHI BT RESIN

26 Jun 96 03:47:08 EDT

Re: Moisture extraction

Fri, 27 Sep 1996 17:35:44 -0400

re: Moisture Sensitivity

Sun, 7 Jul 96 21:39:11 EDT

Moisture Testing

Fri, 10 May 96 08:32:27 CST

Re: Moisture Testing

Fri, 10 May 1996 17:50:50 -0400

Re[2]: Moisture Testing

Sat, 11 May 96 10:49:45 CST

Re: Molded 3D High temp PCB's

Mon, 26 Feb 1996 13:03:27 -0500

Monitoring PH from Aqueous Washer waste stream

10 Jun 96 8:06:22 EDT

More info on Compendx Plus Database

Thu, 2 May 1996 09:47:50 +0000

More Silliness

Tue, 17 Dec 1996 13:59:17 -0500

Mr. Norman Einarson

Sat, 14 Sep 1996 14:53:16 -0400

MRA process

Mon, 26 Aug 1996 03:59:30 EDT

Re: MSDS on disk

Mon, 4 Nov 1996 23:30:57 -0500

Multilayer Lamination Plate Cleaners

Thu, 25 Jan 96 15:35:45 PST

Re: Multilayer Lamination Plate Cleaners

Fri, 26 Jan 96 10:33:34 PST

Re: Multilayer Lamination Plate Cleaners

Sun, 28 Jan 1996 07:35:23 -0500

Re: Nailheading

Wed, 31 Jan 96 12:56:30 EST

Re: NASA rework study

Wed, 10 Jan 1996 18:15:26 -0500

NC flux/stacked film capacitors

Fri, 12 Apr 1996 12:59:04 -0400

Re: Need a batch cleaner

Thu, 12 Dec 1996 08:11:42 -0500

Need a MIL Spec

Wed, 6 Nov 1996 11:59:54 -0500

Re: Need RF Artwork Scanned

Thu, 28 Mar 1996 06:30:29 -0500

Re: Negative Working, Liquid Resists

Fri, 26 Jan 96 07:26:34 EST

Re: Negative Working, Liquid Resists

Fri, 26 Jan 96 07:26:34 EST

NEPCON Proceedings

Wed, 1 May 1996 15:07:39 +0000

Re: NEPCON SW

Tue, 24 Sep 1996 14:02:31 -0400

Re: Nepcon Workshops 1997

Tue, 10 Dec 1996 09:29:46 -0500

Re: New "Shadow" Process

Wed, 01 May 96 13:20:51 PST

Re: New "Shadow" Process

Wed, 01 May 96 17:32:37 EST

Re: New area just opened on PCBFab Home Page

Wed, 10 Jul 1996 00:32:11 -0400

Re: new hole breakout allowances

Thu, 19 Dec 1996 16:02:51 -0500

newbie search question

Monday, 16 December 1996 2:29pm ET

RE: newbie search question

Wed, 18 Dec 1996 11:47:24 -0600

Re: No clean and RF

Fri, 22 Nov 96 12:36:44 PST

Re: Re[2]: No clean and RF

Mon, 25 Nov 1996 10:27:39 -0500

Re: Re[3]: No clean and RF

Mon, 25 Nov 1996 14:20:11 -0500

RE: No Clean Flux

Wed, 14 Feb 96 14:21:32 EST

Re: No clean flux.

Wed, 27 Nov 1996 10:21:27 -0500

Mon, 15 Apr 96 15:18:16 EDT

Tue, 06 Aug 96 11:40:01 EDT

Thu, 08 Aug 96 17:30:56 EDT

Thu, 26 Sep 96 07:20:42 EDT

Mon, 11 Nov 96 08:12:29 EST

Re: no subject (file transmission)

Mon, 25 Nov 96 08:46:43 EST

Thu, 3 Oct 1996 11:08:51 -0400

re: NO-CLEAN FLUXES

17 OCT 96 12:52:57 EDT

Re: Non Functional Lands

Fri, 6 Sep 1996 14:47:56 -0400

RE: Non Functional Pads

Tue, 6 Feb 96 13:48:11 EDT

Re[2]: Non-Functional Pads

Sat, 10 Feb 96 13:37:10 EST

Not received data on T Sonada

Wed, 2 Oct 1996 17:45:36 -0400

Re: Oilly stuff after lamination

Mon, 10 Jun 1996 17:12:31 -0400

Old Printed Circuit Books

Fri, 29 Mar 1996 23:23:14 -0500

Re: Open Via Problem

Fri, 17 May 1996 13:33:24 -0400

Re: Open Via Problem

Fri, 17 May 1996 15:34:23 -0400

re: open vias

Fri, 17 May 1996 11:44:12 -0400

Open vias problem

Fri, 17 May 96 4:11:12 CDT

Re[3]: Open vias problem

Mon, 20 May 96 17:35:24 EST

Re: open/short problem in fine line manufacturing

Thu, 12 Dec 1996 09:01:54 -0500

Re: open/short problem in fine line manufacturing

Thu, 12 Dec 96 09:53:58 PST

Re: open/short problems in fine line manufacturing

Wed, 18 Dec 1996 23:42:11 -0500

RE: Optimizing Placement with the help of DoE. (#878987)

Tue, 17 SEP 96 15:12:43 MDT

OSP Coating

31 OCT 96 14:40:24 EST

OSP's

Mon, 22 Apr 1996 22:51:00 -0500

Other Discussion Forums?

Fri, 12 Jan 96 09:15:01

Re: Other Discussion Forums?

Fri, 12 Jan 1996 14:23:00 -0500

Re: Packaging: Tape&Reel of ESD Sensitive Devices

Fri, 1 Nov 1996 09:22:06 -0500

Re: Padless Plated Thru Holes

Wed, 13 Nov 1996 16:19:25 -0500

Paladium plater needed

Wed, 16 Oct 1996 18:37:03 -0400

Palladium finish

Sun, 26 May 96 11:09:49 PST

Palladium finish

Tue, 28 May 96 10:49:55 PST

Re[2]: Palladium finish

Wed, 29 May 96 14:52:19 PST

Re: Palladium Plating on PWB's

Mon, 15 Apr 1996 07:22:14 -0400

part markings

Thu, 04 Jan 96 10:05:54 CST

PBGA

Fri, 20 Dec 1996 10:32:44 -0600

PBGA and BT vs FR4

Tue, 23 Apr 96 16:20:55 EDT

PC Board Frequency Limits

Tue, 07 May 96 18:55:11 CST

Re: PC Board Frequency Limits

Wed, 08 May 96 14:30:43 EST

Re[2]: PC Board Frequency Limits

Wed, 08 May 96 17:32:11 CST

Re[3]: PC Board Frequency Limits

Thu, 09 May 96 09:19:22 CST

PC Card Spec

Fri, 02 Feb 96 12:59:21 EST

Re: pc cards

Tue, 06 Feb 96 08:48:24 PST

PC Fab

Wed, 10 Jul 96 09:57:23 EDT

Re: PC Fab

Wed, 10 Jul 1996 13:36:31 -0400

Re: PC-800 and Scanning Services (2ND)

Wed, 10 Jul 96 13:50:28 EDT

Wed, 7 Feb 1996 16:29:53 -0500

Re: PCB Assy-Wave Solder

Mon, 17 Jun 1996 13:42:52 -0400

Re[2]: PCB board age

Tue, 17 Sep 96 12:49:13 PST

PCB Build

Mon, 22 Apr 96 16:25:31 EDT

Re: PCB Build

Tue, 23 Apr 1996 10:10:30 -0400

RE: PCB Build

Wed, 24 Apr 96 08:17:28 EDT

PCB carrier for automated assembly line

Wed, 14 Feb 96 08:01:31 -0100

Re: PCB Copyright

Wed, 17 Apr 96 11:39:19 CST

Re: PCB Cost Reduction Effort Help

Fri, 12 Apr 96 08:04:41 CST

Re: Re[2]: PCB Cost Reduction Effort Help

Mon, 15 Apr 1996 11:13:11 +1000 (EST)

PCB Grid Boards: Source?

Wed, 28 Aug 96 12:43:31 EST

PCFAB -- Screening Adhesives

22 Oct 96 10:51:28 EDT

PCFAB forum

Tue, 6 Feb 1996 08:36:01 -0500

Re: PCFAB forum

Tue, 6 Feb 1996 15:37:51 -0500

PCMCIA card

Wed, 20 Nov 96 12:20:51 +0100

Re: PCMCIA card

Wed, 20 Nov 1996 11:31:27 -0500

Re: PCMCIA card

Wed, 20 Nov 96 13:50:42 -0700

PCMCIA Geometries

Tue, 12 Nov 1996 21:13:51 -0500

Re: PCMCIA standards and specification

Tue, 10 Dec 96 12:28:46 PST

Re: PCMCIA standards and specifications

Wed, 11 Dec 96 10:34:08

Re: Peak Soldering Temp.

Fri, 13 Dec 1996 09:01:54 -0500

Peeling problem

Fri, 12 Apr 96 11:28:39 EST

Re: Persulfate / Sulfuric Baths

Tue, 10 Dec 1996 22:05:30 -0500

Photoresist developing

Wed, 3 Jul 1996 16:45:25 +0400 (EDT)

Re: Photoresist developing

Thu, 4 Jul 1996 00:02:17 GMT

Re: Photoresist developing

Thu, 4 Jul 1996 02:11:23 -0400

Wed, 13 Nov 1996 12:12:22 -0500

Re(2): Pins popping up -Reply

Thu, 14 Nov 1996 19:52:27 -0600

Re: Pins Popping Up

Thu, 21 Nov 1996 19:40:09 -0500

15 Nov 96 15:04 GMT+0500

Re: Plastic BGA data and fungus resistance of PEM Packages

Fri, 20 Dec 1996 07:31:14 -0500

Plastic BGA Reliability Issues

Mon, 4 Nov 96 17:06:43 EST

Re: Plastic BGA225 problems & sample devices

Thu, 09 May 96 17:16:09 PST

Re: Plastic BGA225 problems & sample devices

Fri, 10 May 1996 10:40:08 -0400

Re[2]: Plastic Parts in Contact with Solder Wave

Fri, 06 Dec 96 12:26:51

Re: plated Tin/Lead adhesion

Mon, 08 Jan 96 10:44:23 EST

re: Plating Specification

Wed, 5 Jun 96 8:06:19 PDT

Re[2]: Plotting Films

Mon, 03 Jun 96 15:22:43 EST

Re[3]: Plotting Films

Tue, 04 Jun 96 09:56:43 PST

Re[2]: Plugged Vias

Wed, 16 Oct 1996 10:59:43 -0500

Re[2]: Plugged Vias (and laser vias and plasma vias)

Fri, 18 Oct 96 11:27:37 EDT

Plugged Vias (and laser vias and plasma vias)

Fri, 18 Oct 96 14:13:28 EDT

Re[2]: Plugged Vias (and laser vias and plasma vias)

Fri, 18 Oct 96 15:37:43 EDT

Re: PLUGGED VIAS -Reply

Mon, 14 Oct 96 15:46:51 -0700

Re: PLUGGED VIAS -Reply

Mon, 14 Oct 1996 19:41:59 -0400

Re: PLUGGED VIAS -Reply

Mon, 14 Oct 1996 23:35:25 -0400

Re: Polar - Probes

Tue, 9 Apr 1996 08:28:16 +0400 (EDT)

polishing fiducials

Wed, 13 Nov 1996 09:05:04 GMT

polishing fiducials

Wed, 13 Nov 96 10:48:36 EST

polishing fiducials

Wed, 13 Nov 1996 09:05:04 GMT

Re: polyimide bd, failure

Sun, 31 Mar 1996 17:00:47 -0500

RE: Polyimide Board Failures

Mon, 1 Apr 1996 08:50:56 -0500

Re: polyimides (fwd)

Wed, 6 Nov 1996 11:45:32 -0500

re:Popcorning during reflow

Thu, 31 Oct 96 7:44:49 CST

Position Available

Thu, 8 Feb 1996 23:37:17 -0500

Re: PQFP pull test

Fri, 13 Dec 1996 22:04:30 -0500

RE:Preheating of Ceramic Chip Capacitors

Mon, 14 Oct 1996 10:51:33 -0400

Re: Prepreg Material

Sat, 10 Feb 96 12:07:09 EST

Re: Prepreg Storage Environment

Sat, 09 Nov 96 17:46:27 EST

Re: Press-fit Connectors

Tue, 23 Jan 1996 14:35:47 -0500

Processing GETEK

Thu, 15 Aug 96 17:54:21 EDT

Productronica

Tue, 10 Dec 1996 08:19:14 -0500

Re: Productronica

Wed, 11 Dec 1996 08:37:50 -0500

Re[2]: Program to calculate controlled impedance

Thu, 18 Jul 96 11:01:42 MST

Re: Proposed response to Technet

Mon, 21 Oct 1996 08:58:20 -0400

Re: Protection of BGA Solder Joints

Sat, 17 Feb 1996 00:27:07 -0500

PTH Filling Reliability

Wed, 23 Oct 1996 17:58:17 -0500

Re: PTH VerticalFill

Thu, 21 Nov 1996 10:09:01 -0500

PVC in equipment construction

Fri, 01 Nov 1996 07:33:35 EST

Re: PVC in equipment construction

Fri, 1 Nov 1996 10:40:30 -0500

Re: Re[2]: PVC in equipment construction

Sat, 2 Nov 1996 11:09:48 -0500

Re: PWB and PCB???

Mon, 21 Oct 1996 11:39:30 -0600

Re[2]: PWB and PCB???

Mon, 21 Oct 96 14:38:22 EST

Re: PWB and PCB???

Mon, 21 Oct 1996 17:35:12 -0600

Re: PWB cleaning help?

Tue, 14 May 1996 13:03:17 -0400

Re: PWB cleaning help?

Wed, 15 May 96 17:14:50 PST

Re: PWB cleaning help?

Thu, 16 May 96 09:57:29 EDT

PWB Coatings

Mon, 13 May 96 11:05:16 -0400

pwb fab

Fri, 22 Nov 1996 10:56:53 -0500

Re[2]: PWB flexing and SMT components

Wed, 19 Jun 96 15:26:24

Re[2]: PWB flexing and SMT components

Wed, 19 Jun 1996 16:17:39 -0700

Re: PWB Internal Trace Interruption

Tue, 20 Aug 1996 07:19:58 -0400

Re: PWB Internal Trace Interruption

Tue, 20 Aug 1996 06:30:36 -0600

Re: PWB Internal Trace Interruption

Tue, 20 Aug 96 07:17:18 EST

PWB stretch

Fri, 26 Jul 96 13:51:00 PST

Re: PWB surface corrosion?

Fri, 26 Jul 1996 10:24:36 -0400

RE: PWB surface corrosion?

Mon, 29 Jul 96 12:23:29 CDT

Re: FWD: pwb-cca : conformal coating

Mon, 28 Oct 96 09:53:28 PST

Pyralux Lg-1000

Fri, 6 Sep 1996 14:04:33 -0400

Re: Pyralux Lg-1000

Fri, 06 Sep 96 19:32:55 EST

Question

Sun, 28 Apr 96 06:59:24 EDT

Re: Question on Cleaning "No Clean" Soderpaste

Tue, 20 Aug 1996 09:47:50 -0400

RE: Question on Current carrying charts

Thu, 14 Nov 1996 13:54:39 -0800

question on IPC-A-600E - corner cracks

Wed, 4 Sep 96 12:03:20 MET DST

Re: Question on IPC356 Format

Tue, 27 Feb 1996 13:20:45 -0500

Re: Questions about PCB#s

Wed, 14 Aug 96 11:35:21 EDT

Re: Random Nailheading

Tue, 30 Apr 1996 20:20:08 -0400

Re : TSOP with Alloy 42 lead frame field failures

Mon, 25 Nov 1996 09:42:29 -0500

Re ASSEM: Dendritic growth

Wed, 17 Jul 96 15:23:15

Re: Re exp6:Ass.:silver vs. HASL/OSPs

Wed, 18 Dec 1996 15:28:05 -0500

Re whiskers, tin or whatever

Mon, 11 Nov 1996 13:10:34 -0500

Re: Re [2]: Entec 106

Tue, 05 Nov 96 07:25:21 EST

re-filling vias with RESIN

Fri, 23 Aug 1996 09:22:05 EDT

re-immersion silver

Fri, 01 Nov 1996 07:31:12 EST

re-microblind vias laser v plasma

Tue, 22 Oct 1996 15:27:36 EDT

re-odd number layers

Thu, 27 Jun 1996 11:42:00 EDT

Re. tin whisker growth

Fri, 8 Nov 1996 10:55:00 -0500

RE: Re.:Cleaning SMT PCB's with demi-water or IPA

Mon, 12 Feb 96 21:25:27 EST

Re2: Dielectric/plated barrel separation in PWB holes

Thu, 19 Sep 1996 12:52:27 -0400

RE>DES>Current Carrying Capacity

Tue, 15 Oct 1996 09:13:35 -0700

Receipt of 12/12/96 9:31 AM message

Sun, 15 Dec 1996 20:44 -0500 (EST)

Receipt of 12/12/96 9:31 AM message

Sun, 15 Dec 1996 20:44 -0500 (EST)

Reducing Rinse Water Flow Rates

Tue, 23 Apr 1996 01:38:52 -0400

RE: Reducing Rinse Water Flow Rates

Wed, 24 Apr 1996 10:28:52 -0400

Reducing Rinse Water Flowrates

Tue, 23 Apr 1996 8:28:19 -0700 (PDT)

Re: registration equipt

Wed, 24 Apr 1996 22:56:11 -0400

reliability concerns?

Wed, 24 Apr 96 10:44:10 EST

Re: Reliability test

Fri, 13 Dec 1996 15:06:34 -0500

Re: RELIABILITY test chips

Tue, 19 Nov 96 11:05:09 PST

Reliability test data on SLC type technology

Thu, 15 Aug 96 13:57:19 EDT

Reliability Testing

Tue, 05 Nov 96 11:27:11 EST

Re: Removal of Pd by Copper etching

Thu, 24 Oct 1996 09:57:22 -0400

Re: Repair of PCBs

Tue, 23 Jan 1996 14:34:54 -0500

Re: Replacement parts search.

Fri, 02 Aug 96 09:23:32 PST

Re: req info adhesive less flex

Fri, 20 Sep 1996 14:26:36 -0400

Re: REQ: Info on Entek Plus/NC Flux

Wed, 31 Jan 1996 22:20:53 -0500

REQ: Info on Entek Plus/NC Flux

Thu, 1 Feb 96 10:03:33 PST

REQ: Info on Entek Plus/NC Flux

Thu, 1 Feb 96 12:09:54 PST

re: Re: REQ: Info on Entek Plus/NC Flux

Thu, 1 Feb 96 10:36:07 PST

Re: Request

Tue, 5 Nov 1996 13:15:23 -0500

Re: Resin Recession

Sat, 10 Feb 1996 09:03:19 -0500

Re: Resist Lamination Adhesion

Wed, 15 May 1996 19:55:10 -0400

Resist Stripper filters

Sat, 28 Dec 1996 23:29:28 -0500

RESISTIVE CARBON INK

Mon, 23 Dec 96 11:14:38 +0100

Re[2]: Resistor Networks

Thu, 12 Dec 96 14:42:31

Re[3]: Resistor Networks

Fri, 13 Dec 96 08:12:24

REUSABLE SRENCIL FRAMES

Tue, 17 Dec 1996 22:01:54 -0500

Re: REUSABLE STENCIL FRAMES

Wed, 18 Dec 1996 11:28:01 -0500

Re: REUSABLE STENCIL FRAMES

Wed, 18 Dec 96 09:00:04

Reusing trays and tubes

Tue, 10 Sep 96 16:33:18 EDT

Rework after conformal coating

Tue, 5 Mar 1996 16:38:14 -0600

RF substrates - test vehicles

Tue, 26 Mar 96 15:32:23 EST

Safety question - smoldering FR-4

Wed, 31 Jan 1996 17:16:12 +0500 (EST)

Re: Safety question - smoldering FR-4

Wed, 31 Jan 1996 22:20:48 -0500

Schematic Drawing needed

Mon, 20 May 1996 11:57:58 -0400

Scoring

Mon, 29 Apr 96 14:45:57 EST

securing components

Fri, 9 Feb 1996 13:58:47 -0600

Re: Re[2]: seek for powerful strike on customers who don't reaso

Mon, 21 Oct 96 11:31:50 EDT

Re: Re[2]: seek for powerful strike on customers who don't reaso

Mon, 21 Oct 1996 12:07:48 +0400 (EDT)

Re: Re[2]: seek for powerful strike on customers who don't reaso

Mon, 21 Oct 1996 14:09:24 -0400

Re[3]: seek for powerful strike on customers who don't reaso

Mon, 21 Oct 1996 18:31:14 -0700

Re[2]: seek for powerful strike on customers who don't reaso

Fri, 11 Oct 1996 07:49:19 -0400

Re[2]: seek for powerful strike on customers who don't reaso

Tue, 22 Oct 1996 12:29:00 -0400

seek for powerful strike on customers who don't reason!

Sat, 19 Oct 1996 16:13:47 -0400

Re: seek for powerful strike on customers who don't reason!

Thu, 10 Oct 1996 08:00:32 -0400

Re: seek for powerful strike on customers who don't reason!

Mon, 21 Oct 96 11:17:49 EDT

Re: seek for powerful strike on customers who don't reason!

Mon, 21 Oct 1996 14:09:24 -0400

Re[5]: Seinusisms

Fri, 26 Jul 96 13:22:24 PST

Selective Soldering

Fri, 04 Oct 1996 17:08:58 -0700

Selective Wave Soldering

Wed, 20 Mar 1996 08:33:02 +0000

RE: Selective Wave Soldering

Wed, 5 Jun 96 11:52:35 edt

Selective Wave soldering.

Wed, 20 Mar 1996 16:22 -0500 (EST)

Sensing device for double loading.

Wed, 23 Oct 1996 12:03:16 EDT

Re: Sensing device for double loading.

Wed, 23 Oct 96 19:39:07 EST

SERA solderability analyzer

Fri, 8 NOV 96 07:55:06 MST

Shadow Question.

Thu, 11 Apr 96 13:05:40 PST

Re: Sheet Resistivity of 1 OZ. Copper

Mon, 14 Oct 96 16:21:27 EDT

re: Silver Electromigration

Fri, 30 Aug 96 8:27:12 PDT

Re: Silver Ink Screen Print.

Thu, 14 Nov 1996 08:52:14 -0500

Wed, 3 Jul 1996 11:49:15 -0400

Wed, 3 Jul 1996 11:49:31 -0400

Sat, 6 Jul 1996 22:43:29 -0400

Re:Re:Re: silver vs. HASL/OSPs

Fri, 26 Jul 1996 16:47:04 -0400

Fri, 13 Dec 1996 10:56:41 -0500

RE: silver vs. HASL/OSPs

Fri, 13 Dec 96 10:55:29 -0800

Re: silver vs. HASL/OSPs

Fri, 13 Dec 1996 14:28:34 -0500

Re:Re:Re:Re: silver vs. HASL/OSPs

Mon, 16 Dec 1996 08:33:01 -0500

SIR Workshop

Thu, 12 Dec 96 07:50:17 EST

Sites

Wed, 20 Nov 96 15:26:51 +0100

Skip plating

Thu, 25 Apr 96 20:49:41 EDT

SL54S273/BRA

Mon, 30 Sep 1996 14:42:32 -0400

small closed loop aqueous recovery system

Tue, 8 Oct 96 11:07:00 EDT

Re: small closed loop aqueous recovery system

Tue, 8 Oct 1996 13:22:24 -0600

Small closed loop cleaning system

Mon, 16 Sep 1996 14:26:37 -0400 (EDT)

RE: Small closed loop cleaning system

Sun, 6 Oct 96 18:39:22 EDT

Re: Small Via Formation

Tue, 23 Jan 1996 08:23:25 -0500

Tue, 23 Jan 96 14:03:35 EST

Re: Small Via Formation

Tue, 23 Jan 1996 14:37:10 -0500

Re: Re[2]: Small Via Formation

Tue, 23 Jan 96 16:57:15 EST

Wed, 24 Jan 1996 09:17:45 -0500

Re: SMC Replacement system

Wed, 24 Jan 96 09:18:28 PST

Tue, 16 Jan 1996 11:08:45 -0500

SMD adhesive printing

16 SEP 96 05:57:31 EDT

re: SMEMA standard

25 NOV 96 16:13:55 EST

Re: SMT Cleaning

Thu, 19 Dec 1996 11:36:48 -0500

Re: SMT Cleaning

Fri, 20 Dec 1996 14:08:38 -0500

SMT Consultant-Assembly

Thu, 27 Jun 1996 11:21:55 -0400

SMT device storage

Fri, 8 Nov 1996 17:02:49 -0600

re: SMT device storage

11 NOV 96 15:57:44 EST

Re: SMT Equipment

Thu, 6 Jun 1996 15:18:47 -0400

Re: SMT silkscreen standard for cathode/anode, cap. +/-

Fri, 16 Feb 1996 08:03:24 -0500

SMT Training Program

Wed, 24 Apr 1996 13:42:34 -0400

Sn-Pb etch

24 Jan 96 12:13:24 -0600

Re: Sn-Pb etch

Wed, 31 Jan 1996 21:39:29 -0500

Re: SnPb Oxidation

Tue, 19 Nov 1996 17:17:02 -0500

Solder @ SOT-23

Wed, 01 May 1996 19:53:00 +0000

Solder analyses and eutectic

Mon, 25 Nov 1996 13:22:18 -0500

SOLDER BALLS

Wed, 16 Oct 1996 12:51:06 -0500 (EST)

Re: Solder blow-out in soldered PTH assemblies

Tue, 31 Dec 1996 09:32:09 -0500

Re: SOLDER IN THE BENDS

Fri, 8 Nov 1996 21:15:17 -0500

Re: Solder joint temp

Wed, 20 Nov 1996 14:54:25 -0500

solder leveling tape residue

� 22 Jun 96 09:07:48 CDT

Re: solder leveling tape residue

Mon, 24 Jun 96 09:47:42 PST

Re: solder leveling tape residue

Tue, 25 Jun 96 12:19:15 EST

SOLDER PASTE INSPECTION MACHINE QUALIFICATION

Thu, 12 Sep 1996 08:36:12 -0500 (EST)

Re: Solder Paste Plastic or Eutectic

Sun, 24 Nov 1996 18:10:54 -0500

Re[2]: Solder Paste Plastic or Eutectic

Tue, 26 Nov 1996 23:18:11 -0500

Re: Re[2]: Solder Paste Plastic or Eutectic

Mon, 2 Dec 1996 07:41:24 -0500

RE: Re[2]: Solder Paste Plastic or Eutectic (#975031)

Mon, 25 NOV 96 12:20:27 MST

solder pastes with water soluble flux

Tue, 27 Feb 96 13:27:46 -0100

Solder Sticking to Wave Soldering Pallets

Thu, 15 Aug 96 12:26:24 +0200

Re: Solder Sticking to Wave Soldering Pallets

Thu, 15 Aug 96 07:52:26 CST

Solder stripper

Wed, 6 Nov 1996 21:09:18 -0500

Re: Solder stripper

Wed, 6 Nov 1996 23:49:54 -0500

Re: SOLDER WAVE OPTIMIZER

Tue, 13 Aug 1996 13:07:52 -0600

SOLDER WAVE OPTIMIZER

Wed, 14 Aug 96 07:26:12 +0200

Solderability issue on Ni/Au

Tue, 16 Jan 96 13:58:49 PST

solderability testing

Mon, 01 Jul 1996 07:21:20 EDT

FWD: RE: Soldering 50 mil connectors

Thu, 7 NOV 96 16:32:24 MST

RE: Soldering Alloy 42 lead frames

Tue, 24 Sep 96 11:09:21 PDT

Re: Soldering CK06 Capacitors

Mon, 30 Sep 96 15:50:02 EDT

soldering gold pcb's

Thu, 15 Feb 1996 14:13:34 -0500

Re: Soldering iron tip temperatures

Mon, 25 Mar 1996 12:53:51 -0500

Re: Soldering PCBs to carriers

Thu, 30 May 1996 10:38:29 +0400 (EDT)

Soldering PCBs to carriers

Fri, 07 Jun 96 11:01:56 EDT

Soldermask

Fri, 21 Jun 1996 14:24:18 -0400

SOLDERMASK DETERIORATION

Thu, 25 Jan 1996 15:48:12 -0600

Soldermask over vias

Wed, 28 Feb 1996 22:26:55 -0500

Soldermask peeling

Mon, 9 Dec 1996 07:40:31 -0500

Mon, 9 Dec 1996 09:43:22 -0500

Mon, 9 Dec 1996 10:50:22 -0500

Mon, 09 Dec 96 07:21:53

Re[2]: Soldermask peeling

Mon, 9 Dec 96 10:17:09 CST

Mon, 9 Dec 1996 13:08:09 -0500

Re[2]: Soldermask peeling

Mon, 9 Dec 1996 13:18:25 -0500

Re[2]: Soldermask peeling

Mon, 09 Dec 96 10:41:57

Mon, 09 Dec 96 12:15:22 PST8

Re[3]: Soldermask peeling

Mon, 9 Dec 1996 16:01:14 -0500

Mon, 09 Dec 96 14:36:44

Re: Re[2]: Soldermask peeling

Tue, 10 Dec 1996 08:40:27 -0500

Re[4]: Soldermask peeling

Tue, 10 Dec 1996 11:47:02 -0500

Re[5]: Soldermask peeling

Tue, 10 Dec 1996 14:22:23 -0500

Re: Re[4]: Soldermask peeling

Tue, 10 Dec 1996 21:10:38 -0500

Re[6]: Soldermask peeling

Wed, 11 Dec 1996 13:30:07 -0500

Re[3]: Soldermask Tented Vias

Wed, 19 Jun 96 18:20:06 EST

Re: Re[2]: Soldermask Test Guru

Tue, 27 Aug 1996 09:17:50 -0400

Re: Soldermask webs

Thu, 9 May 96 16:18:07 EDT

Fwd: Sonada Papers

Mon, 16 Sep 1996 22:44:22 -0400

Re[2]: Sonascan

Wed, 24 Apr 96 15:11:27 PST

Re: SOT 23 Markings

Thu, 26 Sep 1996 11:00:39 -0600

Re: spc

Wed, 6 Mar 1996 14:32:59 +0500 (EST)

Re: SPC Procedures

Fri, 23 Aug 1996 08:04:58 -0600

Re: specs on CD

Thu, 30 May 96 07:51:38 EDT

Re[2]: SPEEDBOARD PLATING

Tue, 27 Feb 96 17:38:01 EST

speedboard plating

Tue, 27 Feb 1996 23:46:35 -0500 (EST)

Re: Spray Fluxer

Mon, 15 Jan 1996 23:57:45 -0500

Re[2]: Spray Fluxer

Tue, 16 Jan 1996 07:14:59 -0500

Re: Spray Fluxer

Tue, 16 Jan 1996 12:31:19 -1000

Re: RE: Spray Fluxer

Mon, 22 Jan 1996 15:14:33 -1000

Fw: STAT-A-MATRIX

Wed, 4 Dec 96 14:35:48 CST

Stencil Application of Adhesives

Tue, 12 Mar 1996 14:06:09 -0500

Re: Stencil design or Solder Paste?

Wed, 3 Apr 1996 08:55:58 -0500

Re[2]: Stencil design or Solder Paste?

Wed, 03 Apr 96 11:45:04 PST

Stencil Printing Adhesive (for bottom side SMT)

Tue, 27 Feb 1996 15:14 -0500 (EST)

Re: FW: Stencil Printing Adhesive (for bottom side SMT)

Wed, 28 Feb 1996 13:30 -0500 (EST)

Re: Stencil printing adhesive for chip components

Thu, 1 Aug 1996 16:28:18 -0700

Re[2]: Sub: Solder Paste Plastic or Eutectic

Sun, 24 Nov 96 14:24:00 PST

RE: Sub: Solder Paste Plastic or Eutectic (#888717)

Fri, 22 NOV 96 08:29:22 MST

Re: Subj: No-clean Repair

Tue, 12 Nov 1996 13:21:39 -0600

Re: Subj: S.P. Precision Contact

Wed, 06 Nov 96 10:38:40 PST

RE: Sulphur contamination

Thu, 25 Apr 96 15:37:28 EDT

Re: Sulphur contamination

Mon, 29 Apr 1996 17:19:28 -0400

sulphuric acid and pumice!

Tue, 25 Jun 1996 11:57:08 EDT

Re: Sunken Solder

Wed, 3 Apr 1996 15:09:23 +1000 (EST)

Superb job opportunity

Fri, 01 Nov 1996 07:01:29 EST

Supplier Identification

Tue, 06 Aug 96 18:15:35 MST

Surface Areas in Ionic Calculations

Tue, 26 Mar 1996 09:57:29 -0500

Re: Surface Finish

Wed, 06 Mar 96 11:17:16 EST

Surface Finishes and Solderability

Wed, 23 Oct 1996 15:35:03 -0400

Re: Surface Mount Considerations

Sat, 2 Mar 1996 12:05:25 -0500

Re: Surface mount land patterns

Tue, 27 Feb 1996 19:38:10 -0500

Re: Surface mount land patterns

Wed, 28 Feb 96 12:40:11 EDT

Re: Surface Mount Rework Method for A Class 2 Product

Thu, 5 Sep 1996 10:55:52 -0400

SurfWare

Tue, 24 Sep 1996 17:10:44 -0700

SVP Packages

Tue, 5 NOV 96 09:32:02 MDT

Re: SVP Packages

Tue, 05 Nov 96 10:58:43 PST

RE: Tabletop PWA Cleaner wanted

Fri, 9 Feb 96 18:11:52 EST

Re: Tabletop PWA Cleaner wanted

Sat, 10 Feb 1996 06:23:21 -0500

Re: Tabletop PWA Cleaner wanted

Mon, 12 Feb 1996 13:59:50 -0500

Tape Residue Removal

Thu, 22 Feb 1996 07:48:57 -0500

Re: Tape Residue Removal

Thu, 22 Feb 1996 12:15:16 -0500

TCAD in Printed Circuit Industry

Tue, 2 Apr 96 16:48:55 PST

Re: TCE

Wed, 27 Mar 1996 10:28:15 -0500

TDR Measured Dielectric Constant

Mon, 26 Feb 1996 20:09:14 -0500

Re[2]: TDR Measured Dielectric Constant

Tue, 27 Feb 96 10:59:00 EST

TechNet digest list

Mon, 5 Aug 1996 09:53:23 -0500 (CDT)

Re: TechNet digest list

Mon, 5 Aug 1996 11:30:41 -0400

Re: TechNet digest list

Mon, 5 Aug 96 11:57:56 EDT

TechNet Problem

Thu, 17 Oct 96 10:07:00 PST

TechNet service

Wed, 10 Jul 1996 15:35:59 -0500 (CDT)

TechNet service

Wed, 10 Jul 1996 15:35:59 -0500 (CDT)

Re: TechNet service

Wed, 10 Jul 1996 22:29:09 -0400

Teflon

Wed, 11 Sep 1996 13:56:34 -0400

Re: Temp. and RH

Tue, 9 Jul 96 01:04:39 EDT

Temporary Protective Coating

Wed, 29 May 96 09:58:19 PDT

Tented vias???

Wed, 4 Dec 96 13:14:10 EST

Re[2]: Tented vias???

Wed, 04 Dec 96 17:42:04 EST

Re: Re[2]: Tented vias???

Wed, 4 Dec 1996 22:39:26 -0500

Re[2]: Tented vias???

Thu, 05 Dec 96 14:38:21

Thu, 5 Dec 1996 23:56:33 -0500

Re: test: FLYING PROBE VS. HARD TOOLING

Fri, 6 Dec 1996 14:55:43 -0500

Terminal Solderability

17 OCT 96 13:04:20 EDT

test

Tue, 12 Nov 96 07:46:46 +0100

Test Contact

Tue, 31 Dec 96 12:08:45 MDT

test coupons

Mon, 2 Dec 1996 14:00:37 -0500

test coupons

Thu, 5 Dec 1996 14:36:37 -0500

Test Data for GETEK

Thu, 05 Sep 96 19:52:11 EDT

Thu, 12 Dec 1996 16:29:46 -0600

TEST: re cu plating thickness/hole wall

Tue, 26 Mar 1996 09:05:25 -0500

FWD: Text books

Thu, 23 May 1996 14:04:15 -0600

Thanks for the contact

Sun, 18 Feb 1996 12:53:39 -0500

THE PARADIGM PARADOX & ODD UNITS

Tue, 23 Jul 1996 01:00:58 -0400

Re: THE PARADIGM PARADOX & ODD UNITS

Wed, 24 Jul 1996 18:29:48 -0400

Re: The Ultimate in Flooring

Fri, 28 Jun 1996 11:18:25 -0400

Re: Thermal Profile for HASL

Wed, 14 Feb 96 17:56:16

THICK ELECTROLESS

Tue, 26 Nov 1996 04:22:46 EST

Re: Thickfilm resistor technology

Sun, 3 Nov 1996 18:54:16 -0500

Re: Thickness of copper on PCB

Wed, 26 Jun 96 10:28:00 EST

Re: Thickness of copper on PCB

Wed, 26 Jun 96 10:27:09 EDT

Re: Thickness of copper on PCB

Wed, 26 Jun 1996 12:42:00 -0400

Three Rivers Designers Council

Mon, 08 Jan 96 12:04:48 EST

Through hole vs. smt

Tue, 17 Dec 96 10:01 WET

Through Hole wave Vs. rework

Fri, 11 Oct 96 11:33:26 +0200

RE: tin electroplate

Thu, 18 Apr 1996 12:15:06 -0400

Tin electroplate finish for PCBs

Wed, 17 Apr 1996 09:57:17 -0600

Tin electroplate on PCB contact tabs

Thu, 18 Apr 1996 10:49:11 -0400

Tin Plating

Thu, 18 Apr 1996 11:03:49 -0400

Tin Sulfide

Wed, 10 Jul 96 09:06:23 CST

Tin-lead plating thickness

25 SEP 96 07:43:49 EDT

Tin-lead plating thickness

25 SEP 96 07:43:49 EDT

Re: Tin-lead plating thickness

Wed, 25 Sep 1996 16:31:18 -0400

To Much Mail !!

Wed, 24 Jan 1996 08:18:39 -0500

Re: To Much Mail !!

Wed, 24 Jan 1996 16:43:21 -0500

TO SENT

Tue, 02 Apr 96 18:56:16 EST

RE: TO220 reflow soldering

Thu, 27 Jun 96 10:23:57 edt

tombstoning

Mon, 27 May 1996 14:14:38 -0400

Re: Tombstoning 0805 Film Caps

Tue, 17 Dec 96 12:47:45

Traces in between SOIC Pads

Thu, 24 Oct 96 17:48:45 EDT

Re: Trade Show Proceedings

Wed, 1 May 11:22:10 1996

Training Video on Moisture Sensitive Device

Wed, 14 Feb 96 14:40:30 PST

Re: Tucson area fabricators

Fri, 20 Sep 1996 20:19:35 -0400

Re: Two sided SMA

Mon, 09 Dec 96 12:26:50

Undeliverable Mail

Wed, 25 Sep 96 10:24:06 EDT

Undeliverable Mail

Wed, 25 Sep 96 10:19:55 EDT

UNDELIVERABLE MAIL

Tue, 22 Oct 1996 08:10:22 EDT

understanding the root cause of PCB assembly defects

Wed, 17 Jul 1996 12:03:06 -0500 (EST)

Unfused Solder and/or Tin

Thu, 17 Oct 1996 12:18:51 -0400

Re: Unfused Solder and/or Tin

Thu, 17 Oct 1996 19:38:48 -0400

Re: Unfused Tin/Lead plated PCB finish, Thank you all for the enlightenment!

Fri, 18 Oct 1996 15:06:58 -0400

Tue, 16 Jan 96 15:13:06 PST

Fri, 9 Feb 1996 09:16:14 -0500

Sun, 18 Feb 1996 14:53:00 -0500

Sat, 24 Feb 1996 02:56:27 -0500

Thu, 14 Mar 1996 11:31:12 +0500 (EST)

Wed, 20 Mar 1996 17:25:16 -0500

Tue, 30 Apr 1996 09:03:14 -0400

Thu, 9 May 96 09:59:43 EDT

Fri, 10 May 1996 10:39:56 -0400

Wed, 31 Jul 1996 08:06:12 -0500

Wed, 7 Aug 1996 14:34:34 -0400

Sat, 31 Aug 96 09:49:47 EST

Sun, 1 Sep 1996 20:50:29 -0400

Fri, 13 Sep 96 09:15:16 PST

Fri, 13 Sep 1996 23:55:42 -0400

Fri, 25 Oct 1996 09:40:19 +0400 (EDT)

Mon, 18 Nov 96 20:35 WET

RE: Unidentified subject! warpage

Thu, 5 Dec 1996 23:56:32 -0500

Mon, 16 Sep 96 11:31:45 MET DST

Re[2]: Unidentified subject!(Intentional shorts)

Sun, 18 Feb 96 07:46:16 PST

UNSUBSCRIBE

Thu, 10 Oct 1996 11:20 -0500 (EST)

unsubscribe

Wed, 27 Nov 1996 09:35:30 -0600

Uploading of Lavenir FixLT Trace test program to Trace 924.

Tue, 13 Feb 1996 09:20:37 -0500

USB Devices

7 Dec 96 13:41 GMT+0500

Use of a Dynachem 360 DFSM Manual Pre-Laminator

Fri, 19 Jul 1996 06:06:52 -0400

Use of a Dynachem 360 DFSM Manual Pre-Laminator.

Fri, 19 Jul 1996 13:17:55 -0700

re: use of electroless nickel as PTH seeder.

Tue, 7 May 96 12:09:04 PDT

use of nitrogen for convection reflow

Thu, 15 Feb 1996 14:00:50 -0500

Re: Users/designer of buried via product

Tue, 17 Sep 1996 22:11:09 -0400

Re: FW: Users/designer of buried via product

Tue, 24 Sep 1996 18:09:38 -0400

Re: Using ground plane as a heatsink

Fri, 23 Aug 96 08:32:53 CST

UV curable ink?

Wed, 07 Feb 96 10:07:09 dst

Re: UV curable ink?

Thu, 8 Feb 1996 00:54:18 -0500

UV Cure Soldermask

Tue, 17 Dec 1996 21:50:53 -0500

Re: UV Cure Soldermask

Wed, 18 Dec 1996 09:05:31 -0500

Re: UV Measurements

Wed, 9 Oct 1996 13:41:44 -0400

Re: UV-vis Methods for Waste Treatment

Tue, 26 Nov 1996 03:46:56 -0500

Re: Re[2]: UV-vis Methods for Waste Treatment

Tue, 26 Nov 1996 12:17:45 -0500

Re: Re[6]: UV-vis Methods for Waste Treatment

Wed, 27 Nov 96 19:42:43 -0700

Vacuum Desiccating

Fri, 30 Aug 1996 07:23:48 -0400

re: Vapor Phase Reflow

10 SEP 96 16:00:20 EDT

via data

Wed, 9 Oct 1996 09:42:00 -0700

via hole filling with epoxy (ablebond)

Fri, 20 Dec 1996 13:36:14 +0000

Re[2]: via holes & surface mount components

Wed, 14 Feb 96 07:26:19 dst

Re: Vibrators

Thu, 07 Mar 96 13:39:00 EST

Re: Virus Alert

Fri, 10 May 1996 12:55:38 -0400

Virus Alert

Thu, 12 Dec 1996 15:20:08 -0600

Re: Virus Alert

Thu, 12 Dec 96 16:17:25

Re: virus alerts... real or imagined

Thu, 19 Sep 1996 21:12:58 -0400

Virus hoaxes by CIAC - Please read this

Thu, 12 Dec 1996 16:51:51 -0600

VME Sizes

Thu, 25 Jul 1996 08:31:44 -0400

Volts per Mil ????

Tue, 27 Feb 96 07:54:04 EST

Re: Volts per Mil ????

Tue, 27 Feb 1996 20:53:05 -0500

Volts per Mil ????

Wed, 28 Feb 96 08:07:50 EST

Wanted: Zero defects to our customer

21 NOV 96 14:46:21 EST

warped completed assemblies

Tue, 27 Aug 96 09:36:09 EST

Water Mark

Mon, 6 May 1996 10:00:59 -0400

Re: Water Mark

Tue, 7 May 1996 09:39:48 -0400

Wave Solder Evaluation Test Board

Thu, 11 Jul 1996 15:22:49 +0000

Re[2]: WAVE SOLDER FIXTURES

Tue, 24 Dec 96 12:31:52

Wave soldering flux problems

Mon, 1 Jul 96 13:31:43 +0200

We've Moved

Thu, 19 Sep 1996 16:29:44 -0400

Wedge voiding

Wed, 28 Aug 96 10:33:54 EST

What is a rectifier?

Tue, 24 Dec 1996 19:21:16 -0500

RE: What is a rectifier?

Wed, 25 Dec 1996 10:15:33 -0500

White residue between soldered leads

Tue, 07 May 96 12:38:48 PST

Re: White residue between soldered leads

Wed, 8 May 1996 10:09:50 -0400

Re: White residue/lead oxide

Tue, 07 May 96 13:16:49 PST

Re: Re[3]: White residue/lead oxide

Thu, 9 May 1996 08:46:42 -0400

White solder mask

Tue, 10 Dec 1996 22:24:52 -0500

Re: White solder mask

Thu, 12 Dec 1996 16:04:33 -0500

Re: Wire Bond Testing

Fri, 19 Jan 1996 11:43:46 -0500

Re: Wire Bonding

Wed, 16 Oct 96 08:00:30 EST

Wire Cutting and Stripping

Fri, 13 Dec 96 09:42:52 EST

Re: Wire Wrap Capability

Thu, 25 Jan 96 08:17:37 PST

re: WIrebond Gold?

Fri, 9 Feb 96 9:27:22 PST

wirewrap

Thu, 14 Nov 1996 12:36:18 -0500

wirewrap subcontractor

Fri, 15 Nov 1996 14:35:28 -0500

Re: Wisker growth on PCBs

Thu, 7 Nov 1996 21:21:21 -0500

Re: WOVEN KEVLAR

Sat, 28 Dec 1996 00:00:07 -0500

Re: Woven Kevlar

Tue, 31 Dec 1996 14:58:33 -0500

X-outs On Multiple Board Arrays

Fri, 13 Dec 96 16:04:47 CST

Fri, 13 Dec 96 18:42:24

x-ray diffraction machine

Sun, 15 Dec 96 21:37:50 -0800

Re: X-outs on panels

Tue, 30 Jul 1996 08:41:53 -0700

Re: X-outs on panels

Wed, 31 Jul 1996 08:49:22 -0400

Wed, 22 May 96 12:52:36 -0400

Re: X-Ray Inspection

Tue, 02 Apr 96 13:23:36 CST

RE: YDES: MIXED DIELECTRIC CONTROLLED IMPEDANCE?

Thu, 19 Dec 1996 14:36:03 EST

Re: [FAB] Fine line Imaging -Reply

Thu, 7 Nov 1996 23:15:48 -0500

Re: [Fwd: Re: CEM-3 vs. FR-4]

Mon, 16 Dec 96 12:13:51 -0800

[Re]: Off Shore Fab Houses

Thu, 21 Mar 96 10:39:36 -0800

Re: [Re]: Off Shore Fab Houses

Fri, 22 Mar 1996 08:27:39 -0500

Adam Mazer

Verification Testing

Adam Mazer

Thu, 28 Nov 1996 20:49:48 -0500

Aguayo, Art

Re: FAB: PCB Materials

Aguayo, Art

Wed, 03 Apr 1996 08:01:00 -0800

Impedance Software

Aguayo, Art

Wed, 01 May 1996 07:44:00 -0800

Re: Looking for Impedance Software

Aguayo, Art

Fri, 26 Apr 1996 16:09:00 -0800

Test: RF testing of PTFE based laminates

Aguayo, Art

Mon, 01 Apr 1996 09:28:00 -0800

Ahearn, Joseph

IPC Chapter In The Boston Area

Ahearn, Joseph

Fri, 31 May 96 23:13:00 EDT

IPC related question

Ahearn, Joseph

Mon, 03 Jun 96 23:32:00 EDT

On Line Controlled Impedance Calculations

Ahearn, Joseph

Fri, 09 Aug 96 00:55:00 EDT

Al Slagle

shop certification

Al Slagle

Mon, 29 Jan 96 08:09:11 MST

Re: Small Via Formation

Al Slagle

Tue, 23 Jan 96 08:09:58 MST

Re: Solder Paste Deposit Spec.

Al Slagle

Mon, 8 Jan 96 12:27:53 MST

soldermask equip.

Al Slagle

Fri, 26 Jan 96 12:51:42 MST

Alan Berni

EMI/EMC Training Soruces?

Alan Berni

Fri, 26 Jan 96 14:29:50 EST

Alan Butler

Re: FAB: European Suppliers

Alan Butler

10 Apr 96 12:31:38 EDT

Re: FAB: European Suppliers

Alan Butler

10 Apr 96 12:34:33 EDT

ALAN COCHRANE

Re[2]: ADMIN: Sales/Ads

ALAN COCHRANE

Tue, 07 May 96 15:40:38 PST

Re: ASSY: Pad damage on 504 pin BGA's

ALAN COCHRANE

Wed, 22 May 96 17:20:53 PST

Re: FAB, ASSY: "Copper Burning" during plating

ALAN COCHRANE

Mon, 21 Oct 96 13:18:22 PST

Re: Fab: Interconnect Failure

ALAN COCHRANE

Tue, 19 Nov 96 15:55:49 PST

Re: FAB: ODD-EVEN Mode Impedance

ALAN COCHRANE

Wed, 22 May 96 16:59:12 PST

Re[2]: seek for powerful strike on customers who don't reaso

ALAN COCHRANE

Mon, 21 Oct 96 12:07:20 PST

Alan Hilton

(Fwd) TO220 reflow soldering

Alan Hilton

Wed, 26 Jun 1996 22:06:27 PST

Re: DES:,FAB: - Thermal relief for via holes ??

Alan Hilton

Wed, 26 Jun 1996 09:59:59 PST

Alan Seamster

SMI '96 Proceedings

Alan Seamster

Mon, 23 Sep 1996 13:47:23 -0700

Alan Seideman

Re: Virus Alert

Alan Seideman

Fri, 10 May 1996 11:28:32 -0700 (PDT)

Albert R. Aquino

Re: Lead Form for TO-220 & TO-247

Albert R. Aquino

Wed, 7 Feb 1996 11:49:38 -0500

Alessandro Rossi

Fab-Re: Question about Wedge voids

Alessandro Rossi

Sun, 20 Oct 96 00:09:02 PDT

Alex Basauri

# of Layers?

Alex Basauri

09 Dec 96 14:47:42 PST

<None>

Alex Basauri

24 Oct 96 08:23:16 PDT

Address

Alex Basauri

11 Oct 96 09:02:42 PDT

address

Alex Basauri

11 Oct 96 09:07:30 PDT

Re: IS4000

Alex Basauri

17 Oct 96 13:50:18 PDT

Pad geometry

Alex Basauri

10 Oct 96 14:08:44 PDT

Surface Tension

Alex Basauri

05 Oct 96 09:30:06 PDT

Three!

Alex Basauri

30 Dec 96 14:30:48 PST

UV Measurements

Alex Basauri

08 Oct 96 10:46:34 PDT

Alex Ross

FW: Very heavy copper pcb's

Alex Ross

Thu, 24 Oct 1996 14:51:18 +-100

FW: Very heavy copper pcb's

Alex Ross

Thu, 24 Oct 1996 14:49:48 +-100

Alexander Auerbach

Tech Writers Needed

Alexander Auerbach

Mon, 05 Aug 1996 17:49:39 -0700

Alexis Meehan

ASSY: MELF's

Alexis Meehan

Thu, 5 Dec 1996 11:54:20 -0800

Allen Hertz

Re: ASSY: GEN: Popcorning during reflow

Allen Hertz

Thu, 31 Oct 96 08:34:17 EST

Re: ASSY: Polishing Fiducials

Allen Hertz

Tue, 12 Nov 96 13:32:38 EST

Dry Box Source?

Allen Hertz

Mon, 11 Nov 96 14:02:31 EST

Re[2]: Internal and external ground planes

Allen Hertz

Wed, 23 Oct 96 16:13:02 EST

Re: REUSABLE SRENCIL FRAMES

Allen Hertz

Wed, 13 Nov 96 08:55:26 EST

Allen Hertz

Wed, 18 Dec 96 08:16:11 EST

Re[2]: solderability test for ENIG PCB finish

Allen Hertz

Mon, 16 Dec 96 09:45:22 EST

AMC-CAL-DVP Richard Hatano

RE: Question on Current carrying charts

AMC-CAL-DVP Richard Hatano

Fri, 15 Nov 1996 09:04:00 -0800

amughal

Re: Conductive Epoxy/ink

amughal

Tue, 14 May 96 09:22:53 PST

Amy Skubinna

Re[2]: Moisture Sensitivity

Amy Skubinna

Mon, 01 Jul 96 16:39:22 CST

NO-CLEAN FLUXES

Amy Skubinna

Thu, 17 Oct 96 10:28:04 CST

andrej.degen

Oxidation of nickel metal powder in oxigen

andrej.degen

Sat, 13 Jul 1996 10:32:01 -0700

Andrew Buonviri

BGAs

Andrew Buonviri

Mon, 18 Nov 1996 15:59:05 -0400

blind vias

Andrew Buonviri

Mon, 9 Dec 1996 08:26:10 -0400

Re: DES/ASSY: 2 pin shunt connector

Andrew Buonviri

Wed, 4 Dec 1996 13:46:56 -0400

Label Printing

Andrew Buonviri

Wed, 11 Dec 1996 09:51:50 -0400

Andrew Buonviri

Wed, 4 Dec 1996 17:06:43 -0400

Andrew Buonviri

Tue, 19 Nov 1996 08:19:06 -0400

Andrew Nicholson

Re: Controlled Impedance Software

Andrew Nicholson

24 Dec 96 04:33:43 EST

Andy Burkhardt

Re: BackPlane Design

Andy Burkhardt

Thu, 14 Nov 1996 19:21:18 GMT

Andy Burkhardt

Thu, 8 Aug 1996 10:45:23 +0100

Re: DES and fab?? Back Pressure

Andy Burkhardt

Fri, 1 Nov 1996 17:38:22 GMT

RE: DES: True Differential Striplines

Andy Burkhardt

Wed, 12 Jun 1996 22:31:56 +0100

Re: GEN / FAB: Impedance Testing Services

Andy Burkhardt

Fri, 20 Sep 1996 18:01:01 +0100

Re: GEN: AT&S Help wanted

Andy Burkhardt

Tue, 26 Nov 1996 17:11:16 GMT

Re: [DES: Mixed dielectric controlled impedance]

Andy Burkhardt

Thu, 19 Dec 1996 12:06:55 GMT

Andy Heidelberg

Re: Humidity Testing

Andy Heidelberg

Wed, 10 Jul 96 16:11:00 PDT

Andy Kowalewski

Controlled depth drilling

Andy Kowalewski

Thu, 12 Sep 1996 22:37:47 +1100

Andy Mepham

Tech Info

Andy Mepham

Wed, 04 Sep 1996 12:28:29 +0100

Anita Abbatacola

NEW Designer Council for Phoenix, Ariz

Anita Abbatacola

Fri, 15 Mar 1996 09:58:03 -0600 (CST)

Anita Tillman

Thickfilm resistor technology

Anita Tillman

Thu, 31 Oct 1996 13:53:36 -0600

Anthony Hilvers

GEN: Parts Procurement

Anthony Hilvers

Thu, 11 Jul 1996 16:45:13 -0500 (CDT)

Antonino Inferrera

Hi need information

Antonino Inferrera

Mon, 08 Jul 96 22:37:55 -0700

APeder01

DES: Conductor Widths for High Current Conditions

APeder01

08 Apr 1996 09:03:09 EST

FAB: Electroless Nickel - Immersion Gold

APeder01

Fri, 12 Jul 1996 09:55:50 -0400

Wire Bond Testing

APeder01

18 Jan 1996 15:37:15 EST

Aric Parr

Re[2]: (ASSEM) Wave soldering SOT-23

Aric Parr

11 Dec 96 07:43:12 -0500

Aric Parr

12 Dec 96 16:27:29 -0500

Re: 21st ANNUAL ELECTRONICS MANUFACTURING SEMINAR

Aric Parr

27 Nov 96 16:51:27 -0500

Re: ASM: RTV

Aric Parr

16 Oct 96 08:29:36 -0500

Re: assly:baking of hasl pcbs

Aric Parr

23 Oct 96 07:54:18 -0500

Re: ASSY: ADHESIVE SCREEN CLEANING

Aric Parr

16 Oct 96 10:35:59 -0500

Re: ASSY: BOUNDARY VS. FULL TUNNEL WAVE SOLDER NITROGEN INER

Aric Parr

16 Aug 96 13:15:19 -0500

Re: ASSY: Conformal Coating Flammability Problems

Aric Parr

27 Nov 96 08:49:06 -0500

Re[2]: ASSY: Entek Coating

Aric Parr

14 Aug 96 08:13:48 -0500

Re: ASSY: Gold-to-Gold Soldering

Aric Parr

01 Oct 96 08:47:06 -0500

Re: Assy: LPI Matte vs Gloss and Conformal Coating

Aric Parr

20 Aug 96 11:32:18 -0500

Re: ASSY: Peelable Soldermask for Wave Soldering Process

Aric Parr

19 Nov 96 15:43:54 -0500

Re: ASSY: Security coating of SMT leads.

Aric Parr

14 Nov 96 13:57:49 -0500

Re: ASSY:equipments for conformal coating

Aric Parr

07 Oct 96 07:51:22 -0500

Re[2]: ASY: Conformal Coatings

Aric Parr

12 Aug 96 16:26:02 -0500

Re: Blind or Burried Via vs Number of Layers in PWB

Aric Parr

21 Aug 96 11:10:52 -0500

Re[2]: Bubbles in Conformal Coating

Aric Parr

08 Nov 96 08:38:59 -0500

Re[2]: Conformal Coating Adhesion Testing

Aric Parr

22 Nov 96 08:15:11 -0500

Re: Conformal Coatings

Aric Parr

07 Aug 96 08:31:44 -0500

Re: Fwd: DES/ASSY: 2 pin shunt connector

Aric Parr

05 Dec 96 08:35:34 -0500

Re: FAB: Equipment for Cleanliness testing acc. to MIL-P-551

Aric Parr

16 Oct 96 10:34:36 -0500

Re: FAB: HASL drossing

Aric Parr

06 Aug 96 08:53:52 -0500

Re[2]: FAB: to etch chrome but not copper

Aric Parr

31 Jul 96 06:45:45 -0500

Aric Parr

02 Aug 96 09:09:16 -0500

Re: Flux

Aric Parr

04 Sep 96 13:36:16 -0500

Re: Flux complinace to J-Std-001A

Aric Parr

27 Sep 96 12:56:42 -0500

Re: Flux Info

Aric Parr

25 Sep 96 15:53:13 -0500

Re: GEN: ISO-9000 the next step?

Aric Parr

08 Oct 96 07:41:56 -0500

Re: gen:address of dow corning

Aric Parr

17 Oct 96 16:33:51 -0500

Re: Insulating layer

Aric Parr

01 Nov 96 11:28:35 -0500

Re: Matt vs. Glossy soldermask

Aric Parr

07 Oct 96 16:51:27 -0500

Re: Max op temp

Aric Parr

04 Sep 96 16:30:10 -0500

Re: Peak Soldering Temp.

Aric Parr

13 Dec 96 07:26:25 -0500

Re: FWD: pwb-cca : conformal coating

Aric Parr

23 Oct 96 07:50:30 -0500

Re: REBLINDO attachment??

Aric Parr

23 Aug 96 09:51:16 -0500

Re: Silver Ink Screen Print.

Aric Parr

14 Nov 96 13:37:41 -0500

Re: SIR Testing

Aric Parr

19 Dec 96 15:27:46 -0500

Re: SOLDER WAVE OPTIMIZER

Aric Parr

14 Aug 96 07:52:14 -0500

Re: Subj: Flux Compatibility Questions

Aric Parr

09 Dec 96 10:03:24 -0500

Aric Parr

11 Oct 96 16:39:03 -0500

Re: Subj: Forming PTH DIPs For SMD

Aric Parr

22 Oct 96 13:08:53 -0500

Re: Subj: No-clean Repair

Aric Parr

06 Nov 96 15:08:18 -0500

Re[2]: Tented vias???

Aric Parr

05 Dec 96 07:30:49 -0500

Re[2]: Terminal Solderability

Aric Parr

18 Oct 96 08:56:00 -0500

Re: FW: wavesoldering mixed tech boards

Aric Parr

13 Nov 96 07:55:08 -0500

Arny Andrade

Re[2]: Internet Virus

Arny Andrade

Thu, 19 Sep 96 11:59:56 mst

Re: via data

Arny Andrade

Wed, 16 Oct 96 11:59:04 mst

Art Shuler

Interpretation of Para 4.6.1 of Mil-P-55110E AM1.

Art Shuler

Fri, 23 Aug 1996 11:28:57 -0400 (EDT)

Interpretation of Para 4.6.1 of Mil-P-55110E AM1.

Art Shuler

Mon, 26 Aug 1996 09:15:57 -0400 (EDT)

Prepreg Storage Environment

Art Shuler

Mon, 21 Oct 1996 14:30:27 -0700

Re: Drill files for Plated/Unplated Holes

Art Shuler

Tue, 10 Dec 1996 08:48:27 -0800

asingh

asingh

Fri, 27 Sep 96 08:53:23 PST

ipc specifications

asingh

Fri, 23 Feb 96 11:03:01 PST

Re: via holes & surface mount components

asingh

Tue, 13 Feb 96 09:33:42 PST

Audie Breeden

ASSY: SMT Rework Equipment

Audie Breeden

Wed, 13 Nov 1996 16:11:16 -0600

Augustine Li

re:ASSY: Moisture sensitivity?

Augustine Li

Sun, 5 May 96 4:42:30 HKT

Bab-Hui Lee-CTUA065

%P in electroless Ni

Bab-Hui Lee-CTUA065

Sun, 14 Jul 1996 19:35:04 -0500

immersion/electroless tin plating

Bab-Hui Lee-CTUA065

Tue, 30 Jul 1996 9:32:29 -0500

OSP from Kester Solder

Bab-Hui Lee-CTUA065

Wed, 27 Nov 1996 1:23:32 -0600

FW: Users/designer of buried via product

Bab-Hui Lee-CTUA065

Tue, 24 Sep 1996 2:49:22 -0500

Baldwin, Jeff A

ASSY: PCMCIA Board Depanelizing

Baldwin, Jeff A

Mon, 30 Sep 96 09:01:00 DST

ASSY: PCMCIA Connectors

Baldwin, Jeff A

Mon, 30 Sep 96 09:59:00 DST

Assy: PCMCIA depaneling

Baldwin, Jeff A

Wed, 16 Oct 96 13:03:00 DST

ASSY: PCMCIA pallets

Baldwin, Jeff A

Thu, 03 Oct 96 13:23:00 DST

FAB: PCMCIA PCB's

Baldwin, Jeff A

Tue, 01 Oct 96 11:38:00 DST

Barbara Wood

Re: Too Much Mail !!

Barbara Wood

Fri, 26 Jan 1996 06:54:58 -0500

Barry Allen, Manufacturing Eng.

Employment: IE Tech and SMT Line Operator

Barry Allen, Manufacturing Eng.

Wed, 10 Apr 1996 09:25:36 -0600

Barry Allen

Assy: conformal coating

Barry Allen

Thu, 19 Sep 1996 15:16:24 -0400 (EDT)

assy: matte or glossy soldermask?

Barry Allen

Tue, 27 Aug 1996 16:34:55 -0400 (EDT)

Barry Cavanaugh

largest circuit board holes allowable...

Barry Cavanaugh

Wed, 2 Oct 1996 17:51:43 -0700

Barry Darnell

PLUGGED VIAS

Barry Darnell

11 Oct 96 13:20:56 -0400

Vias in SMT

Barry Darnell

18 Sep 96 12:01:55 -0400

WAVE SOLDER FIXTURES

Barry Darnell

19 Dec 96 13:05:51 -0500

Barry Olney

VSO Land Patterns

Barry Olney

Tue, 26 Nov 1996 15:22:42 +1000

Barthel, Bill

ASSY: Area Calc. for Ionic Contamination

Barthel, Bill

Mon, 25 Mar 96 07:23:00 CST

ASSY: Conformal Coating Thickness

Barthel, Bill

Tue, 13 Aug 96 06:33:00 CDT

ASSY: Early Supplier Involvment

Barthel, Bill

Tue, 10 Dec 96 09:25:00 CST

RE:ASSY: PCMCIA Vendor

Barthel, Bill

Thu, 31 Oct 96 09:50:00 CST

ASSY: Simm Board Handling

Barthel, Bill

Sat, 21 Sep 96 08:47:00 CDT

ASSY:Alloy 42

Barthel, Bill

Wed, 17 Apr 96 08:11:00 CDT

ASSY:Solder Paste for Through Hole Connections

Barthel, Bill

Thu, 11 Apr 96 14:44:00 CDT

RELIABILITY: Correlations for Accelerated Test Conditions

Barthel, Bill

Thu, 19 Sep 96 10:09:00 CDT

Repair of PCBs

Barthel, Bill

Tue, 23 Jan 96 11:40:00 CST

Solder Paste Deposit Spec.

Barthel, Bill

Mon, 08 Jan 96 10:18:00 CST

Bastian, Tom

Re: Graphicode vs. Advanced CAM Technologies

Bastian, Tom

Mon, 3 Jun 1996 13:12:42 -0400

Re: Looking for Impedance Software

Bastian, Tom

Fri, 26 Apr 1996 11:50:59 -0400

Re: shop floor control

Bastian, Tom

Thu, 23 May 1996 13:51:33 -0400

beckman_sj

Re[2]: SOLDER WAVE OPTIMIZER

beckman_sj

Wed, 14 Aug 96 11:41:11 EST

BELLLES

Re: Pyralux Lg-1000

BELLLES

Fri, 06 Sep 96 17:16:14 MST

BERNARD LEONARD

Screen Saver Problems

BERNARD LEONARD

Fri, 05 Jul 96 09:54:17 -0700

Bert Ohlig

RE: General: Digital Camera's...

Bert Ohlig

Thu, 19 Dec 96 02:40:10 UT

RE: It works!

Bert Ohlig

Fri, 13 Dec 96 14:11:14 UT

RE: open/short problem in fine line manufacturing

Bert Ohlig

Fri, 13 Dec 96 13:50:42 UT

Request for Drill information

Bert Ohlig

Sat, 30 Nov 96 21:26:10 UT

bhntl

Drilling shift specs

bhntl

Fri, 30 Aug 1996 21:31:20 +0800

Drilling shifted

bhntl

Mon, 26 Aug 1996 22:48:53 +0800

Bilal Khalaf -Applications

Re: Controlled Impedance - Reference Planes

Bilal Khalaf -Applications

Thu, 30 May 1996 09:15:10 -0700

Delay with feedthrus

Bilal Khalaf -Applications

Mon, 20 May 1996 10:46:38 -0700

Re: DES:,FAB: - Thermal relief for via holes ??

Bilal Khalaf -Applications

Wed, 26 Jun 1996 10:35:48 -0700

Bilal Khalaf -Applications

Tue, 28 May 1996 08:43:24 -0700

Re: High Temp PCB

Bilal Khalaf -Applications

Mon, 24 Jun 1996 13:01:22 -0700

Re: Text books

Bilal Khalaf -Applications

Fri, 24 May 1996 09:50:59 -0700

Bilal Khalaf

Re[2]: Hey, where's everybody?

Bilal Khalaf

Fri, 20 Dec 96 08:27:00 PST

DES: Tear Drops

Bilal Khalaf

Mon, 16 Dec 96 13:20:00 PST

HAST

Bilal Khalaf

Thu, 11 Jul 1996 20:54:16 -0700 (PDT)

Bilal Khalaf

Mon, 30 Dec 96 13:01:00 PST

bill birch

Fault finding on test vehicles

bill birch

Tue, 13 Aug 1996 13:40:32 -0700

Re: GEN: Heard of Interconnect Stress Testing (IST)?

bill birch

Thu, 21 Nov 1996 13:07:00 -0800

Bill Butman

Re: Conductive Epoxy/ink

Bill Butman

Tue, 14 May 1996 15:15:44 -0700

Bill Dieffenbacher

Re: Integrity of plastic devices after wave solder

Bill Dieffenbacher

Thu, 07 Nov 1996 09:15:16 -0600

Copper Plating

Bill Dieffenbacher

Wed, 05 Jun 1996 04:59:16 -0500

Re: GEN: Blind via Fill

Bill Dieffenbacher

Mon, 02 Dec 1996 16:03:09 -0600

Bill Dieffenbacher

Mon, 25 Nov 1996 08:33:01 -0600

Re: Plastic BGA data and fungus resistance of PEM Packages

Bill Dieffenbacher

Thu, 19 Dec 1996 03:34:04 -0600

Re: Plastic Parts in Contact with Solder Wave

Bill Dieffenbacher

Fri, 06 Dec 1996 00:16:54 -0600

Returned mail: User Unknown

Bill Dieffenbacher

Thu, 01 Aug 1996 09:32:57 -0500

Re:Re:Re: silver vs. HASL/OSPs

Bill Dieffenbacher

Fri, 13 Dec 1996 02:26:20 -0600

Re: Solderability of Electoless Ni

Bill Dieffenbacher

Fri, 26 Jul 1996 16:33:28 -0500

TN: JOBS: Job Opportunities

Bill Dieffenbacher

Wed, 06 Nov 1996 12:06:21 -0600

Re: Unsubscribe

Bill Dieffenbacher

Fri, 09 Aug 1996 15:01:38 -0500

Bill Fabry

Re: Re[2]- Ni/Au SMP mountin

Bill Fabry

9 Jan 1996 11:29:45 -0800

Re: Re[2]- Electroless Ni/Im

Bill Fabry

1 Mar 1996 11:22:52 -0800

Re: 8 inch Floppies

Bill Fabry

22 Feb 1996 18:51:26 -0800

Re: assly-stencil aperture s

Bill Fabry

21 Nov 1996 10:53:50 U

Re: ASSY- (Mac?) Gerber View

Bill Fabry

22 May 1996 14:48:50 -0800

Re: ASSY- PCMCIA Board Depa

Bill Fabry

10 Oct 1996 09:10:02 U

Re: ASY- HOT BAR EQUIPMENT

Bill Fabry

7 Jun 1996 15:31:12 -0800

Re: BGA

Bill Fabry

10 Jan 1996 18:40:18 -0800

Re: ENTEK 106

Bill Fabry

4 Nov 1996 11:41:35 U

Re: Gen- Job postings

Bill Fabry

6 Nov 1996 12:02:29 U

Re: goldfinish on PC boards

Bill Fabry

4 Nov 1996 15:57:19 U

Re: ISO9000 PCB Shops

Bill Fabry

20 Feb 1996 19:32:52 -0800

Re: largest circuit board ho

Bill Fabry

2 Oct 1996 18:57:39 U

Re: Liability

Bill Fabry

27 Jun 1996 14:28:58 -0800

Re: Ni/Au SMP mounting

Bill Fabry

8 Jan 1996 19:45:06 -0800

Re: Nickel/Gold Immersion

Bill Fabry

29 Mar 1996 09:14:40 -0800

Re: PCMCIA Boards

Bill Fabry

4 Mar 1996 11:26:08 -0800

Re: Problems on PCMCIA Assem

Bill Fabry

8 Jan 1996 11:21:24 -0800

SMT Component Packaging

Bill Fabry

11 Sep 1996 10:38:50 U

Re: Soldering SMC

Bill Fabry

4 Mar 1996 10:43:18 -0800

Bill Gaines B160 x2199

Abstracts of IEPS OC Emerging Tech 96, Feb 7

Bill Gaines B160 x2199

Wed, 31 Jan 96 08:53:46 PST

assy:gold/indum/solder

Bill Gaines B160 x2199

Wed, 29 May 96 16:11:16 PDT

des re: hot trace width

Bill Gaines B160 x2199

Mon, 8 Apr 96 13:57:01 PDT

Re: DES/FAB: PEMNUT FASTENERS IN FR4 FIBERGLASS

Bill Gaines B160 x2199

Fri, 12 Jul 96 08:35:28 PDT

FAB 11 June Dinner Meeting, IEPS Los Angles/Orange Chapter,

Bill Gaines B160 x2199

Thu, 6 Jun 96 16:44:33 PDT

IEPS OC TRW Facility tour

Bill Gaines B160 x2199

Thu, 4 Apr 96 08:25:22 PST

Joint Meeting Noon Wednesday, at NEPCON

Bill Gaines B160 x2199

Thu, 22 Feb 96 17:09:09 PST

Lead stress due to thermal spreaders

Bill Gaines B160 x2199

Tue, 16 Jan 96 08:36:19 PST

Meeting Thurs LA Ca Area.

Bill Gaines B160 x2199

Thu, 24 Oct 96 07:27:13 PDT

Need RF board house

Bill Gaines B160 x2199

Thu, 21 Nov 96 14:07:24 PST

Re: new SMT book

Bill Gaines B160 x2199

Thu, 8 Feb 96 07:21:46 PST

parts: need space sma & ssma vendor

Bill Gaines B160 x2199

Wed, 12 Jun 96 17:51:27 PDT

Program, Los Angles area, 7 Feb, electronic packaging

Bill Gaines B160 x2199

Mon, 15 Jan 96 11:49:01 PST

Re Nepcon Workshops 1997

Bill Gaines B160 x2199

Thu, 12 Dec 96 09:18:10 PST

Re:Short leads in a PWA

Bill Gaines B160 x2199

Wed, 27 Mar 96 15:53:36 PST

SMTA/IEPS Orange Chapter Joint mtg may 23

Bill Gaines B160 x2199

Thu, 23 May 96 07:46:23 PDT

Re:Soldering CK06 Capacitors

Bill Gaines B160 x2199

Tue, 1 Oct 96 14:02:56 PDT

Wire Wrap Vendors

Bill Gaines B160 x2199

Thu, 18 Jan 96 09:14:35 PST

Bill Hunt

ASSY: Soldering process for 50 mil pitch connectors

Bill Hunt

Thu, 07 Nov 96 11:23:52 -0800

Bill Jenkins

pth boards in small proto shops

Bill Jenkins

Thu, 06 Jun 1996 16:09:42 -0700

Bill Moore

DES: schematic conventions

Bill Moore

Fri, 28 Jun 96 10:06:54 PDT

BILL RUGG

Thu, 6 Jun 96 16:11:27 MDT

FYI: Solder Joint Stress Generated from Compression Connector

BILL RUGG

Tue, 28 May 96 16:30:58 MDT

FYI: Solder Joint Stress Generated from Compression Connector

BILL RUGG

Wed, 29 May 96 09:05:00 MDT

FYI: Solder Joint Stress Generated from Compression Connector

BILL RUGG

Mon, 3 Jun 96 08:12:26 MDT

re:PWB flexing and SMT components

BILL RUGG

Wed, 19 Jun 96 12:44:08 MDT

Solder Joint Stress Generated from Compression Connector

BILL RUGG

Fri, 24 May 96 16:25:04 MDT

Solder Joint Stress Generated from Compression Connector

BILL RUGG

Tue, 28 May 96 14:13:05 MDT

Bill Sturner x2855

Material Properties for 72Ag/28Cu brazing alloy

Bill Sturner x2855

Wed, 11 Dec 1996 17:30:12 -0500

Bill Watson

Re: DES- Punched via

Bill Watson

31 Oct 1996 15:58:25 U

Bob Bickers

bismuth based solder

Bob Bickers

Wed, 30 Oct 96 14:47:17 PST

Bob Hawkins

PWB Internal Trace Interruption

Bob Hawkins

Mon, 19 Aug 1996 18:52:05 +0000

BOB HAYNES

Re: FAB: IPC-SM-840

BOB HAYNES

Fri, 01 Nov 96 8:13:22

BOB HOENE

Re: 8 inch Floppies -Reply

BOB HOENE

Fri, 23 Feb 1996 07:18:33 -0600

Electrical test efficiency.

BOB HOENE

Wed, 24 Jan 1996 09:09:03 -0600

Re[2]: Latest Revision of the EIA-481 Spec. -Reply

BOB HOENE

Fri, 01 Mar 1996 15:14:37 -0600

X-ray inspection and process analysis.

BOB HOENE

Tue, 13 Feb 1996 13:33:37 -0600

Bob Lundquist

Re: ASSY-Metal Stamping

Bob Lundquist

Thu, 30 May 96 10:09:23 CDT

GEN: printed circuits obsolete

Bob Lundquist

Fri, 04 Oct 96 10:39:00 PDT

Non-functional pads

Bob Lundquist

Tue, 13 Feb 96 10:16:08 CDT

Re: Plating Specification

Bob Lundquist

Tue, 4 Jun 96 14:58:53 CDT

Reducing Rinse Water Flow Rates

Bob Lundquist

Wed, 24 Apr 96 08:05:37 CDT

Bob McGarry

WOVEN KEVLAR

Bob McGarry

Fri, 27 Dec 1996 10:29:05 +0000

Bob Metcalf

Re: ASSY: Dry film mask and paste thickness -Reply

Bob Metcalf

Tue, 16 Apr 1996 16:25:16 -0700

Assy: LPI Matte vs Gloss and Conformal Coating -Reply

Bob Metcalf

Tue, 20 Aug 1996 12:19:21 -0700

ASSY: soldermask flaking -Reply

Bob Metcalf

Fri, 26 Jul 1996 13:14:58 -0700

LPI application methodes -Reply

Bob Metcalf

Fri, 06 Sep 1996 09:25:28 -0700

Bob Metcalf

Wed, 10 Jul 1996 09:41:24 -0700

Bob Metcalf

Wed, 10 Jul 1996 09:41:24 -0700

Re: PLUGGED VIAS -Reply -Reply

Bob Metcalf

Wed, 10 Jul 1996 09:41:24 -0700

PC Fab -Reply -Reply

Bob Metcalf

Wed, 10 Jul 1996 13:05:21 -0700

PLUGGED VIAS -Reply

Bob Metcalf

Mon, 14 Oct 1996 11:12:59 -0700

Bob Metcalf

Mon, 14 Oct 1996 16:03:06 -0700

RE: Relative issues concerning the tenting of vias -Reply

Bob Metcalf

Wed, 30 Oct 1996 11:53:04 -0800

Water wash solder masks -Reply

Bob Metcalf

Thu, 14 Nov 1996 06:51:26 -0800

Bob Mykich

assembly - pressfit connections

Bob Mykich

Tue, 18 Jun 96 18:17:00 EDT

Bob Neves

Re: ASSY Moisture Release Rates and Prebake Parameters

Bob Neves

Thu, 26 Sep 1996 11:46:51 -0700

Re: controlled impedance

Bob Neves

Wed, 21 Aug 1996 17:28:30 -0700

Re: fab: Multilayer Test Coupons

Bob Neves

Thu, 10 Oct 1996 13:17:50 -0700

Re: Gigahertz

Bob Neves

Thu, 05 Sep 1996 20:06:01 -0700

Re: microsections

Bob Neves

Fri, 27 Sep 1996 08:40:47 -0700

Re: Military spec interpretation

Bob Neves

Tue, 27 Aug 1996 13:03:44 -0700

Re: Military Specification Sheet

Bob Neves

Wed, 11 Sep 1996 12:18:26 -0700

Re: Single Ply Mil Specs Requirements

Bob Neves

Wed, 04 Sep 1996 09:22:49 -0700

Re: SIR comb pattern

Bob Neves

Wed, 21 Aug 1996 17:24:58 -0700

Bob Oliver, Jr.

RE: Chemistry to strip 90/10 SnPb

Bob Oliver, Jr.

Mon, 4 Nov 1996 17:06:20 -0600

Bob Oliver, Jr

RE: compensation machine

Bob Oliver, Jr

Wed, 18 Sep 1996 08:33:54 -0500

RE: Direct metalization of Flex Rigid PWBs

Bob Oliver, Jr

Tue, 23 Apr 1996 09:33:02 -0500

RE: Dry Film Breakdown

Bob Oliver, Jr

Fri, 13 Sep 1996 14:55:56 -0500

RE: Dry Film Resist Test

Bob Oliver, Jr

Thu, 11 Jul 1996 15:31:27 -0500

RE: Dynachem Film Problems

Bob Oliver, Jr

Tue, 2 Apr 1996 08:54:22 -0600

RE: gold plating problem

Bob Oliver, Jr

Thu, 25 Apr 1996 13:00:50 -0500

RE: Post-Etch-Punch and Optical Post Lamination (Optimizer)

Bob Oliver, Jr

Wed, 10 Apr 1996 09:15:11 -0500

RE: Tin/Lead to Straight Tin Plating

Bob Oliver, Jr

Tue, 23 Apr 1996 09:32:19 -0500

Bob Poirier

assly:baking of hasl pcbs -Reply

Bob Poirier

Wed, 23 Oct 1996 08:25:17 -0700

assy: matte or glossy soldermask? -Reply

Bob Poirier

Wed, 28 Aug 1996 07:27:13 -0700

Water wash solder masks -Reply

Bob Poirier

Thu, 14 Nov 1996 11:04:48 -0800

Bob Smith - Foxboro Co

RE: Nailheading

Bob Smith - Foxboro Co

Wed, 31 Jan 96 12:49: 3 est

RE: soldermask equip.

Bob Smith - Foxboro Co

Fri, 26 Jan 96 16:21:14 est

Bob Smith - Foxboro

RE: FAB Re Tin plt. instead of Sn/Pb

Bob Smith - Foxboro

Mon, 24 Jun 96 08:58:25 edt

RE: fab: Getek Material

Bob Smith - Foxboro

Wed, 5 Jun 96 07:48:20 edt

RE: FWD>FAB- MEASURING DEVICE F

Bob Smith - Foxboro

Fri, 3 May 96 13:56:10 edt

Bob Spaniol

Operating Temperatures of FR-4 material

Bob Spaniol

Mon, 15 Apr 1996 16:55:28 -0700

Bob Stumpf

FAB: Cut Sheet Lam -Reply

Bob Stumpf

Wed, 18 Sep 1996 11:38:58 -0700

FAB: Cut Sheet Lam -Reply -Reply

Bob Stumpf

Fri, 20 Sep 1996 15:35:00 -0700

FAB: Use of MEK -Reply

Bob Stumpf

Sat, 20 Jul 1996 17:29:43 -0700

[FAB] Fine line Imaging -Reply

Bob Stumpf

Wed, 06 Nov 1996 21:28:55 -0800

Bob Trinnes

Re[2]: via holes & surface mount components

Bob Trinnes

Wed, 14 Feb 96 11:15:52 EST

Bob Willis

Re: ASS- X S Solder on SOT-23

Bob Willis

14 Dec 96 08:20:30 EST

Bob Willis

01 May 96 13:09:50 EDT

Ass: Bob Willis Fan Club

Bob Willis

16 Dec 96 02:45:44 EST

Re: Ass: Cable Assembly Destructive Testing

Bob Willis

05 Sep 96 02:24:07 EDT

Re: ASS: Cracking of Decoupling Caps

Bob Willis

08 Aug 96 03:41:34 EDT

ASS: Defects on CD ROM ?

Bob Willis

18 Apr 96 14:53:50 EDT

Re: re: ASS: Storeage of PWB

Bob Willis

15 May 96 14:41:49 EDT

Ass:Des:Free UK Seminars

Bob Willis

09 Aug 96 13:38:20 EDT

Ass:Fab:Des:SMART European Workshops

Bob Willis

14 Oct 96 04:36:32 EDT

Ass:Fab:Des:SMART Workshops

Bob Willis

28 Oct 96 03:36:07 EST

Re: ASSY post-reflow cleaning

Bob Willis

15 Apr 96 10:35:57 EDT

Re: ASSY Qualifying reflow solder process

Bob Willis

15 Apr 96 10:35:53 EDT

RE:Assy, training provider

Bob Willis

28 May 96 13:51:58 EDT

Re: ASSY- Solder joint mech

Bob Willis

01 Aug 96 01:51:35 EDT

ASSY: CD ROM Training in SMT

Bob Willis

02 Jun 96 05:31:54 EDT

Re: re:ASSY: CD ROM Training in SMT

Bob Willis

06 Jun 96 15:16:33 EDT

Re: ASSY: CD ROM Training in SMT

Bob Willis

06 Jun 96 15:16:24 EDT

Re: ASSY: Chip Resistors Breaking

Bob Willis

08 Dec 96 07:20:53 EST

Re: ASSY: Dry film mask and paste thickness

Bob Willis

17 Apr 96 12:28:11 EDT

Re: Re[2]: ASSY: Menisograph Testers

Bob Willis

14 Jul 96 12:25:35 EDT

Re: ASSY: Paste In Hole

Bob Willis

07 Nov 96 15:01:23 EST

Re: ASSY: PBGA Void Size Specifications?

Bob Willis

08 Aug 96 03:02:14 EDT

Re: Assy: Solder ball removal

Bob Willis

08 Aug 96 02:55:42 EDT

Re: Assy: Solder Thieves

Bob Willis

20 Aug 96 13:21:52 EDT

ASSY:DES: More Book Reviews

Bob Willis

03 Aug 96 11:22:21 EDT

ASSY:FAB:Des: Joint Cracking LCCCC

Bob Willis

10 Sep 96 14:44:04 EDT

Re: ASSY:SMT pallets

Bob Willis

22 Jun 96 08:37:21 EDT

Re: Ball Grid Array Back End Processing

Bob Willis

14 Jul 96 12:32:22 EDT

Re: Re[2]: BGA assembly.

Bob Willis

14 Dec 96 09:09:17 EST

Re: BGA INSPECTION

Bob Willis

25 Jun 96 15:25:21 EDT

Re: BGA Solder Defect Criteria

Bob Willis

25 Nov 96 02:29:12 EST

Re: BGA Standards

Bob Willis

24 Aug 96 05:00:55 EDT

Re: blowholes in entek boards

Bob Willis

29 Nov 96 13:25:21 EST

RE: DES: DFM and DFT about BGAs

Bob Willis

08 Aug 96 02:51:13 EDT

Re: DSN: BGA DESIGN LAYOUT

Bob Willis

16 Jun 96 13:07:30 EDT

RE: Exposing thru-hole componets to reflow temperature cycles.

Bob Willis

26 Jul 96 02:49:31 EDT

RE: FAB/ASSY/DES: Outgassing solder in via-hole

Bob Willis

16 Sep 96 02:19:43 EDT

Re: FAB: silver vs. HASL/OSPs

Bob Willis

14 Dec 96 09:09:11 EST

FAB:Ass:Results Solder Finish Survey

Bob Willis

04 Jun 96 04:07:11 EDT

FAB:Assy More Book Reviews

Bob Willis

07 Jul 96 11:29:25 EDT

FAB;ASSY New Book Reviews

Bob Willis

05 Jul 96 05:11:12 EDT

Re: Fill vias for reliability??

Bob Willis

20 Oct 96 08:48:59 EDT

Re: FWD>assy: hot bar solder jo

Bob Willis

11 Jul 96 07:44:05 EDT

Re: Gen: Moisture - outgassing of pcb's

Bob Willis

03 Oct 96 13:16:57 EDT

Re: General Workmanship Standards

Bob Willis

08 Aug 96 03:00:16 EDT

Re: INSPECTION Internal Solder Joint

Bob Willis

18 Dec 96 13:15:28 EST

Bob Willis

01 Aug 96 01:42:24 EDT

Re: Interest in SIR Workshop

Bob Willis

10 Dec 96 13:46:57 EST

Re: meniscograph reply - hey Dave Hillman

Bob Willis

31 May 96 13:22:40 EDT

Nepcon Workshops 1997

Bob Willis

09 Dec 96 14:53:56 EST

Re: OSP Process or HASL

Bob Willis

29 Aug 96 02:54:02 EDT

Re: PC Fab -Reply

Bob Willis

10 Jul 96 15:58:16 EDT

Re: PCB Cost Reduction Effort Help

Bob Willis

15 Apr 96 10:35:49 EDT

Pin Hole Reflow FAQ's

Bob Willis

04 Jul 96 14:13:31 EDT

Re: PQFP pull test

Bob Willis

18 Dec 96 13:14:39 EST

RE: Preheating of Ceramic Chip Capacitors

Bob Willis

11 Oct 96 03:00:27 EDT

Re: Re[2]: PWB flexing & Chip Cracking

Bob Willis

21 Jun 96 14:32:16 EDT

Re: PWB: Wave Soldering Guidelines

Bob Willis

26 Jul 96 14:28:08 EDT

Re: Question on Cleaning "No Clean" Soderpaste

Bob Willis

20 Aug 96 13:21:46 EDT

Re: SOLDER BALLS

Bob Willis

20 Oct 96 08:50:01 EDT

Re:Solder blow-out in soldered PTH assemblies

Bob Willis

31 Dec 96 13:30:32 EST

Re: Solder-cut-solder process

Bob Willis

03 Nov 96 02:06:01 EST

RE: Soldermask

Bob Willis

22 Jun 96 08:19:24 EDT

Re: Stencil printing adhesive for chip components

Bob Willis

01 Aug 96 14:14:57 EDT

Stencil Survey Up Date

Bob Willis

08 Sep 96 06:27:20 EDT

Re: Surface Tension

Bob Willis

07 Oct 96 07:16:58 EDT

The SMART Group Conference 1996

Bob Willis

11 May 96 06:56:38 EDT

Re: Wave Solder Evaluation Test Board

Bob Willis

13 Jul 96 03:05:35 EDT

Re: FW: Wave solder not adhering to electrot

Bob Willis

01 Aug 96 01:47:09 EDT

X Ray Inspection Standard

Bob Willis

14 Dec 96 08:20:13 EST

Re:[2] Alloy 42

Bob Willis

01 May 96 13:12:20 EDT

Bobbie Steinmetz

GEN:job opportunity

Bobbie Steinmetz

Thu, 26 Sep 96 12:19:49 EDT

Brad Martin

Electro-Mechanical design position

Brad Martin

Tue, 9 Apr 1996 16:47:11 -0400

Thick FR4

Brad Martin

Fri, 1 Mar 1996 15:35:21 -0500

brad reese

fab: ipcD275

brad reese

Fri, 06 Sep 1996 17:28:42 -0700

FAB:Controlled Z drilling for blind or buried vias

brad reese

Fri, 15 Nov 1996 10:39:08 -0800

Printed Circuit Board Vibration Damping

Brad Reese

Wed, 22 May 1996 10:11:23 -0700

Brenda Windt

ASSY: training

Brenda Windt

Wed, 18 Sep 96 11:04:22 CST

Brent Vanlandingham

Assy: Solder Paste Height

Brent Vanlandingham

Mon, 16 Sep 1996 16:09:47 -0400

BRESNAN, TOM

Re: Bare Board Test PCBs with BGAs

BRESNAN, TOM

Mon, 12 Feb 96 15:50:35 PST

Re: Blind Via's in MLB's

BRESNAN, TOM

Mon, 19 Feb 96 12:29:41 PST

Re[3]: Blind Via's in MLB's

BRESNAN, TOM

Mon, 19 Feb 96 17:05:46 PST

Brian Hyde

FREE PHOTO DEFINED MICROVIA WORKSHOP - THURS NOV 14TH - WESTFORD MA - ALL WELCOME - CALL OR E-MAIL TO REGISTER

Brian Hyde

Thu, 22 Aug 1996 08:57:20 -0400

Brian McDermott

Brian McDermott

Mon, 04 Nov 1996 15:46:41 -0500

Brian R Oatman

RE: Cu on FR-4

Brian R Oatman

Fri, 26 Jan 1996 11:38:13 -0800

Brian Thomas

Air Emissions from Printed Circuit Manufacturing

Brian Thomas

Wed, 10 Apr 1996 06:44:48 PST

Brian Wilkinson

Brian Wilkinson

Fri, 01 Nov 1996 21:31:13 -0500

BrianWada

Re[2]: ASSEM: Component attrition during placem

BrianWada

Thu, 26 Dec 96 08:59:46 PST

Assembly

brianwada

Mon, 14 Oct 96 17:16:44 PST

Re: ASSY: Affects on solder mask after wave solder

BrianWada

Wed, 27 Nov 96 15:19:11 PST

Re[2]: ASSY:equipments for conformal coating

brianwada

Tue, 15 Oct 96 10:56:56 PST

Re: Collumated printers and fine lines

BrianWada

Fri, 22 Nov 96 14:13:10 PST

Re: Dry Box Source?

BrianWada

Mon, 11 Nov 96 12:55:46 PST

Re[2]: FAB: DELMAT

brianwada

Fri, 01 Nov 96 09:13:21 PST

Re: Fab: Vacuum Dessication Chambers

BrianWada

Tue, 26 Nov 96 18:10:07 PST

Re: Glass Epoxy Gold Finger Guards

BrianWada

Fri, 27 Dec 96 15:08:01 PST

Re[2]: Unidentified subject!

BrianWada

Tue, 19 Nov 96 09:05:07 PST

Brinker, Mike

RADIAL LEAD SPANS AND LEAD FORMS

Brinker, Mike

Mon, 29 Jul 96 08:54:00 CDT

Universal DIP Inserter

Brinker, Mike

Tue, 30 Jul 96 14:49:00 CDT

Brock Hunter

Re: FAB: Cirlog

Brock Hunter

Wed, 09 Oct 1996 22:02:54 -0400

Brookhaven National Laboratory

Long Island Chapter Core Meeting 4/30/96

Brookhaven National Laboratory

Wed, 24 Apr 96 08:35:33 EDT

Long Island Chapter Meeting Dates

Brookhaven National Laboratory

Fri, 3 May 96 08:56:50 EDT

RE: Long Island Designer Council meeting notice

Brookhaven National Laboratory

Thu, 7 Mar 96 11:16:49 EST

RE: meeting notice, Long Island Designers Council

Brookhaven National Laboratory

Mon, 7 Oct 96 09:34: 9 EDT

meeting notice, Long Island Designers Council

Brookhaven National Laboratory

Mon, 14 Oct 96 14:25: 1 EDT

Brooman, Eric W

Symposium

Brooman, Eric W

30 Apr 96 18:42:38 EDT

Bruce MacDonald

Re: Spec. JIS-C6481

Bruce MacDonald

Fri, 30 Aug 1996 15:12:32

Bruce Smith

Re: gen: thermal mass

Bruce Smith

Thu, 05 Dec 96 14:40:14 EST

Soldering CK06 Capacitors

Bruce Smith

Tue, 01 Oct 96 11:01:19 EST

Soldering CK06 Capacitors

Bruce Smith

Wed, 02 Oct 96 08:50:04 EST

Bruenning, Jason

RE: ASSM: Top fillet formation

Bruenning, Jason

Fri, 20 Dec 96 14:11:00 CST

RE: Re[2]: ASSY Moisture Release Rates and Prebake Parameters

Bruenning, Jason

Fri, 27 Sep 96 10:39:00 CDT

RE: RE:ASSY:

Bruenning, Jason

Tue, 14 May 96 09:44:00 CDT

RE: ASSY: BOUNDARY VS. FULL TUNNEL WAVE SOLDER NITROGEN INERTING

Bruenning, Jason

Fri, 16 Aug 96 12:39:00 CDT

RE: assy: Dross elimination (#943028)

Bruenning, Jason

Thu, 15 Aug 96 13:05:00 CDT

RE: ASSY: Post-wave Warpage

Bruenning, Jason

Fri, 17 May 96 13:43:00 CDT

RE: Re[2]: ASSY: Post-wave Warpage

Bruenning, Jason

Sat, 18 May 96 11:05:00 CDT

Don't want to scrap it.

Bruenning, Jason

Wed, 27 Mar 96 12:06:00 CST

Gen: Moisture - outgassing of pcb's

Bruenning, Jason

Thu, 01 Aug 96 16:12:00 CDT

Gen: Cold Solder Joints

Bruenning, Jason

Fri, 02 Aug 96 09:14:00 CDT

Bruenning, Jason

Fri, 27 Sep 96 09:04:00 CDT

GEN: SRS by Apple house

Bruenning, Jason

Mon, 01 Apr 96 13:38:00 CST

General - Education for Electronics/Quality Assurance of

Bruenning, Jason

Thu, 20 Jun 96 11:13:00 CDT

RE: OMEGA WAVE

Bruenning, Jason

Wed, 22 May 96 07:57:00 CDT

RE: Solder Sticking to Wave Soldering Pallets

Bruenning, Jason

Thu, 15 Aug 96 08:54:00 CDT

RE: Soldermask

Bruenning, Jason

Fri, 21 Jun 96 14:22:00 CDT

RE: Re[4]: Soldermask peeling

Bruenning, Jason

Wed, 11 Dec 96 10:55:00 CST

Spray Vs Foam Fluxing

Bruenning, Jason

Mon, 19 Feb 96 14:21:00 CST

RE: test

Bruenning, Jason

Mon, 11 Nov 96 11:00:00 CST

Wave Solder Temperature Profiles

Bruenning, Jason

Mon, 15 Jul 96 14:22:00 CDT

Bryan K. Douglas

ASSY: Large Boards for Telecom

Bryan K. Douglas

Tue, 5 Nov 96 06:39:10 CST

Solder defect rate at 20mil pitch

Bryan K. Douglas

Thu, 22 Aug 96 08:46:16 CDT

Re: PWB and PCB???

Bryan K. Douglas

Mon, 21 Oct 96 11:27:19 CDT

Re: Wire bonders

Bryan K. Douglas

Tue, 5 Nov 96 06:36:06 CST

Bryan Woods

Re: Footprint Pattern

Bryan Woods

Wed, 17 Jan 1996 09:44:16 -0800

Bryan Woods

Wed, 3 Jan 1996 17:55:32 -0800

Buda Erel

ketchup & mustard dispensers

Buda Erel

Wed, 16 Oct 1996 10:45:18 -0700

Budster

re: DES - BGA Layout App notes?

Budster

Wed, 20 Nov 1996 16:38:54 -0800

Burnett, Lewis (AZ77)

RE: GEN: specs on CD

Burnett, Lewis (AZ77)

01 Jun 1996 11:55:12 -0500

RE: GEN: specs on CD

Burnett, Lewis (AZ77)

01 Jun 1996 13:47:29 -0500

IPC Designers Council -- Greater Phoenix Chapter Meeting

Burnett, Lewis (AZ77)

04 Apr 1996 16:55:52 -0600

starting Designer Council chapter in Arizona

Burnett, Lewis (AZ77)

Wed, 17 Jan 96 10:27:00 MST

BWOOLDRI

Re: Flux Residue After Wave Cleaning

BWOOLDRI

Wed, 27 Mar 96 08:46:20 CST

BWOOLDRI

Mon, 19 Feb 96 08:44:47 CST

C.J. Long

Gold finger burr

C.J. Long

Fri, 13 Dec 1996 14:23:37 +0800

cabeles

Re: ASSY: Cu Ni Sn board finishes

cabeles

Fri, 02 Aug 96 08:14:26 PST

Etch Information

cabeles

Fri, 21 Jun 96 15:48:47 PST

Re: DES:,FAB: - Thermal relief for via holes ??

cabeles

Wed, 06 Nov 96 14:21:28 PST

Re: GEN: Resist Strip

cabeles

Fri, 27 Dec 96 16:05:41 PST

Re: HASL Microetch

cabeles

Thu, 26 Sep 96 11:34:58 PST

Cadence User Account

Cadence User Account

Wed, 26 Jun 96 09:19:05 PDT

DES:FAB:ASSY:correction PWB SPEC MIGRATION

Cadence User Account

Thu, 15 Aug 96 16:51:26 PDT

Re: FAB: DES: ASSY: PWB SPEC MIGRATION

Cadence User Account

Wed, 14 Aug 96 16:07:01 PDT

Caldera Desktop User

DES/FAB: 2.8-3.3 Dielectric 20x30 In. Laminate

Caldera Desktop User

Mon, 9 Dec 1996 16:58:48 -0800 (PST)

DES: Mixed dielectric controlled impedance

Caldera Desktop User

Wed, 18 Dec 1996 16:11:12 -0800 (PST)

Campbell, Todd @ GSC

RE: X-outs on panels

Campbell, Todd @ GSC

Mon, 29 Jul 96 16:35:00 PDT

Campuzano.Charles

Measurement System Evaluation

Campuzano.Charles

Tue, 24 Sep 1996 07:39:11 -0700

Re: MIL-P-55110 Certified Testing Labs

Campuzano.Charles

Fri, 27 Sep 1996 09:27:25 -0700

Candice Leighton

Mil-P-13949

Candice Leighton

Mon, 4 Nov 1996 14:22:25 -0500

Carey Ritchey/BURN/COM/AUGAT

Re: DES: EMI and micro switching induced noise

Carey Ritchey/BURN/COM/AUGAT

28 Aug 96 13:35:40

EMI and micro switching induced noise

Carey Ritchey/BURN/COM/AUGAT

16 Aug 96 10:13:10

Carey Ritchey/KENT/COM/AUGAT

RO40003 and RO4350

Carey Ritchey/KENT/COM/AUGAT

2 Oct 96 17:38:44

Carlos Mejia

Help! I Need Training Materials!

Carlos Mejia

Wed, 07 Feb 96 15:17:00 PST

REQ: Info on Entek Plus/NC Flux

Carlos Mejia

Wed, 31 Jan 96 15:36:00 PST

Carlsson Per

Solderability of Au/Ni plate printed cir

Carlsson Per

Wed, 18 Dec 1996 11:06:00 +0100

Carol Adkins

RE:Supercritical CO2 Cleaning

Carol Adkins

02 Jan 1996 13:46:21 -0700

CATHY

Workmanship Standards

CATHY

Mon, 05 Feb 1996 10:45:07 -0800 (PST)

ccMail SMTPLINK

ccMail SMTPLINK Undeliverable Message

ccMail SMTPLINK

Fri, 20 Dec 96 08:34:06 PST

Cesar

Job Offered for Process Engineer

Cesar

Fri, 9 Feb 1996 11:10:33 -0700 (MST)

Chan Yong Kwee

Stencil design or Solder Paste?

Chan Yong Kwee

Wed, 3 Apr 1996 11:37:00 +0800

Sunken Solder

Chan Yong Kwee

Wed, 3 Apr 1996 11:36:57 +0800

Charlene Dwyer

Re[2]: Documentation for panelizing Different boards

Charlene Dwyer

Thu, 17 Oct 1996 18:46:53 -0500

Charles Barker/IO-US

-No Subject-

Charles Barker/IO-US

16 Jan 96 15:22:44

Re: Re[2]: ASSY: Depanelization of SMT Board Assys

Charles Barker/IO-US

18 Mar 96 8:02:47

Charles Barker/IO-US

26 Apr 96 15:55:08

Re: Assy: opens after 2nd solder

Charles Barker/IO-US

16 May 96 8:59:38

ASSY: PWB RAW MATERIALS

Charles Barker/IO-US

16 May 96 10:15:35

Re: ASSY: Teflon Board Repair

Charles Barker/IO-US

9 May 96 11:10:30

Re: Causes for Shorts on PWB's

Charles Barker/IO-US

22 May 96 12:27:13

Charles Barker/IO-US

22 Jan 96 14:01:07

Re: Footprint Pattern

Charles Barker/IO-US

17 Jan 96 9:27:00

Re: GEN: Cadence Allegro >--< AutoCAD dwg utilities

Charles Barker/IO-US

7 May 96 9:07:07

Lead Attachment System

Charles Barker/IO-US

16 Jan 96 11:59:05

Lead Attachment System

Charles Barker/IO-US

16 Jan 96 11:59:05

Re: No CLEAN FLUXES

Charles Barker/IO-US

28 Jun 96 10:53:58

Re: Palladium Plating on PWB's

Charles Barker/IO-US

15 Apr 96 11:47:06

Re: Solderability issue on Ni/Au

Charles Barker/IO-US

17 Jan 96 8:24:05

Soldermask dams

Charles Barker/IO-US

14 May 96 9:59:00

Re: Stencil design or Solder Paste?

Charles Barker/IO-US

3 Apr 96 14:14:23

Re: Text books

Charles Barker/IO-US

24 May 96 10:01:08

Charles Elliott

Capping vias for BGA's

Charles Elliott

Wed, 6 Nov 96 08:27:51 EST

Charles Elliott

Wed, 6 Nov 96 11:45:15 EST

Re: DES/ASSY: 2 pin shunt connector

Charles Elliott

Wed, 6 Nov 96 11:45:15 EST

Charles H. Emory

Re: Assy-Fiducials

Charles H. Emory

Fri, 27 Sep 1996 11:49:43 -0400

Charles J Wills

Charles J Wills

Tue, 10 Dec 1996 22:49:09 EST

Pins popping up

Charles J Wills

Tue, 12 Nov 1996 21:49:24 EST

Pins Popping Up

Charles J Wills

Fri, 15 Nov 1996 21:49:13 EST

Charlie Crep

ASSY: Affects on solder mask after wave solder

Charlie Crep

Wed, 27 Nov 96 08:46:27 CST

Chaye Bookey

Rolled solder

Chaye Bookey

Thu, 08 Aug 96 10:50:00 PDT

chen xiao bo

Bellcore

chen xiao bo

Wed, 31 Jul 1996 14:55:36 +0900

PCMCIA Dimensional Stabilty

chen xiao bo

Fri, 02 Aug 1996 09:01:45 +0900

cheolpark

PCMCIA Array

cheolpark

Sun, 16 Jul 1995 18:38:12 +0900

Chilcote, Jim (AZ75)

RE: ASSY: Automated Defect Scatter Diagrams ?

Chilcote, Jim (AZ75)

30 Dec 1996 17:28:43 -0600

RE: FAB: Finding a Solderpot

Chilcote, Jim (AZ75)

14 Nov 1996 13:38:27 -0600

RE: Markers

Chilcote, Jim (AZ75)

18 Nov 1996 10:48:42 -0600

Chris Bowles

Land Patterns for Motorola 68360

Chris Bowles

Fri, 01 Nov 1996 13:29:14 -0700

Chris Byrne

RE:Assy, training

Chris Byrne

Thu, 23 May 1996 10:33:47 -0500

BGA Flux Cleaning and Testing

Chris Byrne

Fri, 12 Jan 1996 12:40:18 -0600

JTAG Testing

Chris Byrne

Mon, 18 Nov 1996 12:34:22 -0600 (CST)

Re:PCB Assy

Chris Byrne

Mon, 13 May 1996 17:13:46 -0500

PCB Assy-Wave Solder

Chris Byrne

Mon, 17 Jun 1996 11:23:19 -0500

Chris Hunt, National Physical Laboratory

RE: ASSY: SMT Shelf Life

Chris Hunt, National Physical Laboratory

Wed, 21 Aug 1996 17:54 BST

immersion tin plating

Chris Hunt, National Physical Laboratory

Tue, 30 Jul 1996 18:03 BST

Re: Solderability Testing

Chris Hunt, National Physical Laboratory

Mon, 1 Jul 1996 18:03 BST

Chris Stack

Fwd: RE: ASSY: Cu Ni Sn board finishes

Chris Stack

07 Aug 96 10:22:34 -0400

Fwd: RE: ASSY: Cu Ni Sn board finishes

Chris Stack

10 Aug 96 14:40:07 -0400

FAB: How quick can a board be made?

Chris Stack

16 Jul 96 10:43:51 -0400

FAB:Fwd: Re: Plugged Vias

Chris Stack

24 Jun 96 09:16:47 -0400

Fwd: GEN: Apology....and then some.

Chris Stack

08 May 96 11:18:05 -0400

GEN: Parts procurement

Chris Stack

11 Jul 96 15:15:13 -0400

GEN: PCB copyright issues

Chris Stack

08 May 96 12:27:40 -0400

In search of Delta Circuits

Chris Stack

09 Jul 96 16:23:53 -0400

Fwd: In search of Delta Circuits

Chris Stack

09 Jul 96 16:37:17 -0400

Re: PADS PCB Layout tools

Chris Stack

16 Jul 96 13:01:36 -0400

PCB CAD Software forums

Chris Stack

12 Jun 96 13:24:44 -0400

Chris Wiwczaroski

(DES, FAB, ASSEM) Din Rail Mountable PCB's

Chris Wiwczaroski

Thu, 05 Dec 1996 14:15:11 -0600

Christina Piasky

Re:Sonascan

Christina Piasky

Wed, 24 Apr 1996 07:58:47 +0000

Christopher Rhodes

COMMERCIAL SOURCE OF ANTIMONY TETRAOXIDE POWDER

Christopher Rhodes

Thu, 25 Jul 1996 09:57:07 -0500 (CDT)

Chua Hung Peng

FAB:Black oxide Vs Alpha preq

Chua Hung Peng

Fri, 6 Dec 1996 09:25:00 +0800

chuan

RE: Copper plating

chuan

Fri, 20 Dec 1996 18:33:42 +0800

Re: FAB: Void holes

chuan

Thu, 19 Dec 1996 13:13:12 +0800

chuan

Thu, 19 Dec 1996 13:13:30 +0800

Chuck Gannon

Question on IPC356 Format

Chuck Gannon

Tue, 27 Feb 96 09:07:24 EST

chuck

PCB

chuck

Fri, 03 May 1996 00:14:08 -0700

Cian O Mathuna

Re: Cracking Capacitors

Cian O Mathuna

Tue, 2 Jan 1996 13:27:19 +0000

CINDY KEMP ORLANDO ISC *8-306-6873

RE: Preheating of Ceramic Chip Capacitors

CINDY KEMP ORLANDO ISC *8-306-6873

Fri, 11 Oct 1996 7:18:27 -0400 (EDT)

FWD: pwb-cca : conformal coating

CINDY KEMP ORLANDO ISC *8-306-6873

Wed, 23 Oct 1996 7:12:53 -0400 (EDT)

CINDY KEMP ORLANDO ISC 8*826-6873

ASSY: TSOP Solder Joint Cracks

CINDY KEMP ORLANDO ISC 8*826-6873

Mon, 7 Oct 1996 17:13:10 -0400 (EDT)

RE: assy:compatability gold vs tin/lead

CINDY KEMP ORLANDO ISC 8*826-6873

Thu, 23 May 1996 16:24:08 -0400 (EDT)

FWD: RE: Black oxide on outer layers

CINDY KEMP ORLANDO ISC 8*826-6873

Fri, 27 Sep 1996 10:00:02 -0400 (EDT)

Cindy Kemp

GLUEING O7O5 / 0805 CHIP RESISTORS

Cindy Kemp

Wed, 03 Apr 96 15:47:08 -0500

Circuit Science Inc

Wave Solder and solder bridging

Circuit Science Inc

Mon, 11 Mar 1996 07:57:20 -0600

Clark Dave (Indy)

RE: PCB carrier for automated assembly line

Clark Dave (Indy)

Mon, 19 Feb 96 18:38:00 PST

Clive Bell

Re: Direct Metallisation

Clive Bell

Tue, 10 Dec 96 18:00:30 +0000

Colight

[FAB] Fine line Imaging

Colight

Tue, 05 Nov 1996 18:25:59 -0800

colinluk

Gerber file format

colinluk

Sat, 19 Oct 96 15:22:10 -0700

Conner, Wendell L.

Direct metalization of Flex Rigid PWBs

Conner, Wendell L.

Mon, 22 Apr 96 15:43:00 EST

Connie Herring

ISO9000 Shop

Connie Herring

Wed, 21 Feb 96 09:40:39 PST

Cooper, Tom

Re: ASSY Circuits Assembly

Cooper, Tom

Thu, 06 Jun 96 09:10:53 EST

Re[2]: BGA Pattern

Cooper, Tom

Wed, 21 Feb 96 09:29:33 EST

Re: Lead Attachment System

Cooper, Tom

Thu, 18 Jan 96 10:02:24 EST

More specific about test point request

Cooper, Tom

Fri, 09 Feb 96 15:59:00 EST

New PADS Software

Cooper, Tom

Wed, 14 Feb 96 10:39:26 EST

PADS vs Allegro

Cooper, Tom

Fri, 09 Feb 96 10:33:21 EST

SMT Test Points

Cooper, Tom

Fri, 09 Feb 96 11:11:40 EST

Re: FW: Virus Alert

Cooper, Tom

Fri, 10 May 96 14:48:49 EST

Re: Wire Bond Testing

Cooper, Tom

Fri, 19 Jan 96 09:54:16 EST

Re: Wire bonders

Cooper, Tom

Tue, 05 Nov 96 09:35:16 EST

Craig Williams

Re: DESIGN: Bypass capacitor under PLCCs?

Craig Williams

Tue, 2 Apr 1996 07:06:31 -0800

Crawford, John A.

FW: Almit solder

Crawford, John A.

Wed, 24 Jan 96 09:36:00 EST

ALMIT Source

Crawford, John A.

Tue, 23 Jan 96 16:07:00 EST

RE: Conductive Epoxy w/ Solder Term. Chip Caps

Crawford, John A.

Thu, 22 Feb 96 09:53:00 EST

RE: Drilling Study

Crawford, John A.

Mon, 05 Feb 96 12:52:00 EST

Re: long-term storage of DIPs

Crawford, John A.

Fri, 16 Feb 96 13:07:00 EST

RE: new SMT book

Crawford, John A.

Thu, 08 Feb 96 10:13:00 EST

Outgassing causing solder balls

Crawford, John A.

Tue, 06 Feb 96 09:48:00 EST

Probing Solder Paste Flux Residue

Crawford, John A.

Wed, 24 Jan 96 13:52:00 EST

RE: Protection of BGA Solder Joints

Crawford, John A.

Fri, 16 Feb 96 10:02:00 EST

RE (very late): Air entrapment in pastes

Crawford, John A.

Wed, 24 Jan 96 09:59:00 EST

Re Correction: BGA Flux Cleaning and Testin

Crawford, John A.

Tue, 16 Jan 96 09:36:00 EST

RE: Repair of PCBs

Crawford, John A.

Tue, 23 Jan 96 14:02:00 EST

RE: Spray Fluxer (general info)

Crawford, John A.

Wed, 24 Jan 96 09:11:00 EST

RE: SMI 1995 Proceedings

Crawford, John A.

Thu, 22 Feb 96 08:25:00 EST

RE: Sn-Pb etch

Crawford, John A.

Mon, 29 Jan 96 12:10:00 EST

Crawford, John A.

Mon, 22 Jan 96 09:52:00 EST

RE: Where is John Lau

Crawford, John A.

Mon, 08 Jan 96 09:17:00 EST

RE: X-ray inspection and process analysis.

Crawford, John A.

Wed, 14 Feb 96 12:27:00 EST

CSS Asia Co., Ltd.

small closed loop aqueous recovery system

CSS Asia Co., Ltd.

Sat, 8 Jun 1996 10:53:23 +0900

Poly Imide laminate

CSS Asia Co., Ltd.

Mon, 22 Jul 1996 19:18:52 +0900

curtis sexton

curtis sexton

Sun, 22 Sep 1996 23:03:34 -0600

Cy Holmes

Re: assy: Dross elimination

Cy Holmes

14 Aug 96 22:28:13 EDT

Conductive epoxy/ink circuitry.

Cy Holmes

Fri, 9 Aug 1996 14:59:59 +1200

C__WANG

Re: Open vias problem

C__WANG

17 May 96 14:54:49 -0400

D. Rooke

Re: ASSEM: Component attrition during placem

D. Rooke

Mon, 23 Dec 1996 21:46:53 -0500 (EST)

ASSY : Post Assembly soldering

D. Rooke

Mon, 4 Mar 1996 23:44:29 -0500 (EST)

Re: ASSY: Board Flatness Spec

D. Rooke

Tue, 27 Aug 1996 07:15:12 -0400 (EDT)

Re: FW: ASSY: Fine Pitch Dewetting?

D. Rooke

Tue, 30 Apr 1996 00:26:03 -0400 (EDT)

Re: ASSY: Immersion Gold

D. Rooke

Tue, 29 Oct 1996 19:56:57 -0500 (EST)

Re: ASSY: Immersion Gold -Reply

D. Rooke

Fri, 1 Nov 1996 20:45:56 -0500 (EST)

Re: assy:Immersion gold finishes

D. Rooke

Thu, 22 Aug 1996 20:41:51 -0400 (EDT)

Re: Bow and twist - an old perspective for at least a while

D. Rooke

Sun, 4 Feb 1996 17:28:40 -0500 (EST)

Re: Cause and Corrective Actions for Pink Ring and Wedge Voids...

D. Rooke

Thu, 22 Aug 1996 20:41:02 -0400 (EDT)

CEM-3 vs. FR-4

D. Rooke

Mon, 16 Dec 1996 19:06:51 -0500 (EST)

Re: Re[2]: Copper plating

D. Rooke

Thu, 19 Dec 1996 23:53:02 -0500 (EST)

D. Rooke

Fri, 20 Dec 1996 20:17:48 -0500 (EST)

DES/ASSY : BGA design question

D. Rooke

Wed, 8 May 1996 22:36:48 -0400 (EDT)

DES/ASSY : BGA design question

D. Rooke

Thu, 9 May 1996 23:22:48 -0400 (EDT)

Re: DES/FAB: PEMNUT FASTENERS IN FR4 FIBERGLASS

D. Rooke

Fri, 12 Jul 1996 07:47:04 -0400 (EDT)

Re: DES/FAB: PEMNUT FASTENERS IN FR4 FIBERGLASS

D. Rooke

Wed, 17 Jul 1996 22:06:23 -0400 (EDT)

Re: Design

D. Rooke

Mon, 16 Sep 1996 22:54:56 -0400 (EDT)

Re: DFM

D. Rooke

Thu, 15 Feb 1996 22:41:31 -0500 (EST)

Re: Drilling shifted

D. Rooke

Mon, 26 Aug 1996 20:12:51 -0400 (EDT)

Dry Film Processing

D. Rooke

Wed, 28 Feb 1996 20:41:05 -0500 (EST)

DSN/FAB : 50 mil pitch thru hole connectors

D. Rooke

Mon, 11 Nov 1996 20:31:02 -0500 (EST)

Equipment wanted

D. Rooke

Tue, 23 Jan 1996 23:29:34 -0500 (EST)

Re: FAB - Durabond as a replacement for Black Oxide...

D. Rooke

Fri, 8 Nov 1996 23:34:13 -0500 (EST)

Re: FAB DWGS - Specifying Material/Stackup

D. Rooke

Fri, 1 Nov 1996 20:45:34 -0500 (EST)

Re: FAB or DES: Z-Axis expansion

D. Rooke

Thu, 5 Sep 1996 23:13:52 -0400 (EDT)

Re: Fab-Re: Nailheading

D. Rooke

Wed, 1 May 1996 21:54:48 -0400 (EDT)

Re: Fab: Drill Bit Web Thickness

D. Rooke

Tue, 2 Apr 1996 22:12:54 -0500 (EST)

FAB: DSN: V-groove and SMT

D. Rooke

Thu, 14 Nov 1996 20:07:23 -0500 (EST)

Re: FAB: E-GLASS VS. S-GLASS

D. Rooke

Thu, 29 Feb 1996 21:12:02 -0500 (EST)

Re: FAB: Electroless copper

D. Rooke

Fri, 14 Jun 1996 07:35:52 -0400 (EDT)

D. Rooke

Mon, 5 Aug 1996 22:09:14 -0400 (EDT)

FAB: Immersion gold inquiry

D. Rooke

Tue, 6 Aug 1996 23:39:21 -0400 (EDT)

D. Rooke

Sun, 14 Jul 1996 22:48:43 -0400 (EDT)

Re: FAB: Innerlayer misregistration xray

D. Rooke

Fri, 22 Nov 1996 21:05:01 -0500 (EST)

Re: FAB: Laminate properties, film compensation

D. Rooke

Wed, 14 Aug 1996 22:48:50 -0400 (EDT)

Re: FAB: Large conductive areas

D. Rooke

Tue, 10 Sep 1996 20:33:26 -0400 (EDT)

FAB: Moisture content Inner Layers

D. Rooke

Mon, 4 Nov 1996 22:23:21 -0500 (EST)

FAB: Wanted Solder Reflow Service

D. Rooke

Wed, 6 Mar 1996 23:41:13 -0500 (EST)

Re: FAB:Open Vias Problem

D. Rooke

Fri, 17 May 1996 23:12:30 -0400 (EDT)

Re: FAB:Questions about pink-ring

D. Rooke

Sun, 3 Mar 1996 15:51:28 -0500 (EST)

Re: FAB:Questions about pink-ring

D. Rooke

Mon, 4 Mar 1996 07:29:46 -0500 (EST)

Re: GEN: Heard of Interconnect Stress Testing (IST)?

D. Rooke

Wed, 20 Nov 1996 22:41:28 -0500 (EST)

Re: GEN: Heard of Interconnect Stress Testing (IST)?

D. Rooke

Thu, 21 Nov 1996 21:47:05 -0500 (EST)

GEN: Help wanted

D. Rooke

Fri, 22 Nov 1996 21:03:26 -0500 (EST)

GEN: Help wanted

D. Rooke

Fri, 22 Nov 1996 21:03:26 -0500 (EST)

GEN: Simple Question

D. Rooke

Thu, 28 Nov 1996 23:38:23 -0500 (EST)

D. Rooke

Fri, 22 Nov 1996 21:02:52 -0500 (EST)

Re: Hole breakout - request for opinions/assistance

D. Rooke

Sun, 24 Nov 1996 23:04:05 -0500 (EST)

D. Rooke

Wed, 8 May 1996 22:20:39 -0400 (EDT)

Re: Hole breakout - request for opinions/assistance

D. Rooke

Thu, 9 May 1996 23:14:34 -0400 (EDT)

RE: Hole to internal feature specifications

D. Rooke

Mon, 5 Feb 1996 23:19:07 -0500 (EST)

RE: Immersion gold inquiry

D. Rooke

Wed, 17 Jul 1996 22:07:03 -0400 (EDT)

Re: interconnect failure - update

D. Rooke

Wed, 20 Nov 1996 22:41:35 -0500 (EST)

Re: ipc specifications

D. Rooke

Sat, 24 Feb 1996 01:08:46 -0500 (EST)

Nailheading

D. Rooke

Mon, 29 Jan 1996 23:22:46 -0500 (EST)

Re: Nailheading

D. Rooke

Wed, 31 Jan 1996 22:52:27 -0500 (EST)

Re: Non-Functional Pads

D. Rooke

Sun, 4 Feb 1996 17:25:09 -0500 (EST)

Re: PCB board age

D. Rooke

Mon, 16 Sep 1996 23:06:45 -0400 (EDT)

Re: Re[2]: PerfecTest

D. Rooke

Wed, 2 Oct 1996 19:37:27 -0400 (EDT)

Re: re-microblind vias laser v plasma

D. Rooke

Wed, 13 Nov 1996 22:08:57 -0500 (EST)

D. Rooke

Wed, 23 Oct 1996 21:48:38 -0400 (EDT)

Re: SIR and SEC

D. Rooke

Thu, 7 Mar 1996 20:18:23 -0500 (EST)

Re: Thermal shock of blind and buried vias

D. Rooke

Sat, 17 Feb 1996 19:38:34 -0500 (EST)

Re: wave solder and reflow fixture technology

D. Rooke

Sat, 5 Oct 1996 10:31:52 -0400 (EDT)

Re: Woven Kevlar

D. Rooke

Tue, 31 Dec 1996 13:03:20 -0500 (EST)

D. Shmueli

CONVERT ARTWORK TO GERBER

D. Shmueli

Wed, 22 May 1996 23:33:15 -0700

D. Terstegge

Supplier for dummy components

D. Terstegge

Mon, 25 Nov 1996 20:37:25 +0100

10 years of UK MCMs - an IEEE CPMT technical meeting

D. Terstegge

Wed, 04 Dec 1996 21:38:12 +0100

D.C.Whalley

D.C.Whalley

Thu, 24 Oct 1996 17:22:42 -0400

Ass: Wavesoldering temperature profiles

D.C.Whalley

Tue, 10 Sep 1996 14:32:04 -0400

Re: ASSY reflow profile expert software.

D.C.Whalley

Tue, 18 Jun 1996 15:06:13 -0400

Re: ASSY:FAB:Des: Joint Cracking LCCCC

D.C.Whalley

Fri, 13 Sep 1996 11:45:54 -0400

Re: ASSY:FAB:Des: Joint Cracking LCCCC

D.C.Whalley

Mon, 16 Sep 1996 08:10:24 -0400

Re: Capacitor Aging

D.C.Whalley

Thu, 15 Feb 96 08:48:27 gmt

Re: EPOXY BONDING COMPONENTS TO SN/PB

D.C.Whalley

Mon, 11 Nov 1996 09:20:16 -0500

Re: FAB: Emissivity

D.C.Whalley

Wed, 18 Sep 1996 17:06:47 -0400

Re: FAB: Laminate properties, film compensation

D.C.Whalley

Thu, 15 Aug 1996 13:38:54 -0400

Re: FAB:DFM Software

D.C.Whalley

Wed, 03 Jul 1996 18:15:46 -0400

Re: Fault finding on test vehicles

D.C.Whalley

Wed, 14 Aug 1996 16:31:48 -0400

Re: Field Return Relaibility Data

D.C.Whalley

Mon, 22 Apr 1996 08:14:23 -0400

Jornal of Electronic Manufacturing

D.C.Whalley

Wed, 21 Feb 96 17:27:08 gmt

RE: Re: matrix trays - recycle? (#667790)

D.C.Whalley

Wed, 11 Sep 1996 08:23:24 -0400

MICRO- AND NANO- ENGINEERING CONFERENCE

D.C.Whalley

Wed, 08 May 1996 08:20:47 -0400

PhD Studentship Available

D.C.Whalley

Fri, 16 Aug 1996 10:56:53 -0400

Research post available

D.C.Whalley

Fri, 09 Aug 1996 12:01:58 -0400

Re: Solder

D.C.Whalley

Wed, 7 Feb 96 17:09:40 gmt

Re: SOLDER IN THE BENDS

D.C.Whalley

Mon, 11 Nov 1996 09:33:08 -0500

Re: SOLDER PASTE INSPECTION MACHINE QUALIFICATION

D.C.Whalley

Fri, 13 Sep 1996 08:30:44 -0400

Re: Solder Paste Plastic or Eutectic

D.C.Whalley

Mon, 25 Nov 1996 12:26:41 -0500

Re: Surface Mount Considerations

D.C.Whalley

Thu, 29 Feb 96 17:34:31 gmt

Re: Telecomms Tropicalisation

D.C.Whalley

Mon, 12 Feb 96 09:22:42 gmt

The Interconnection Group WWW pages

D.C.Whalley

Mon, 10 Jun 1996 17:06:41 -0400

Re: Unidentified subject!(Intentional shorts)

D.C.Whalley

Sat, 06 Jul 1996 13:33:24 -0400

D.C.Whalley

Wed, 14 Feb 96 08:55:23 gmt

vacancy sr. micropackaging designer

D.C.Whalley

Thu, 16 May 1996 08:03:17 -0400

D.White

Gold plating

D.White

Mon, 9 Sep 1996 11:17:22 -0700 (PDT)

Dagon, David

Re: FW: Virus Alert (Hoax)

Dagon, David

Fri, 10 May 1996 02:55:38 -0700

Dan Delargy

RE: Etching very thick copper

Dan Delargy

Wed, 20 Nov 1996 09:12:19 -0600

none

Dan Delargy

Wed, 13 Nov 1996 08:52:45 -0600

RE: Test information from PCIF

Dan Delargy

Wed, 27 Nov 1996 10:22:00 -0600

RE: test validation

Dan Delargy

Wed, 27 Nov 1996 10:13:30 -0600

RE: Airbourne bovines etc

Dan Delargy

Wed, 20 Nov 1996 07:44:47 -0600

Daniels, Ron

Palladium plating

Daniels, Ron

Wed, 14 Feb 96 07:37:28 PST

DARDA HAYES

Humidity Testing

DARDA HAYES

Tue, 9 Jul 1996 16:19:36 -0500

Darnell, Ron

Re: Moisture

Darnell, Ron

Mon, 29 Jan 96 09:28:00 CST

Darrell Bonzo

Darrell Bonzo

Sat, 21 Dec 96 7:06

RE: Cardboard boxes

Darrell Bonzo

Fri, 26 Jul 96 8:21

RE: Poly Imide laminate Sources

Darrell Bonzo

Thu, 07 Nov 96 7:38

RE: GEN: Phone Number

Darrell Bonzo

Fri, 09 Aug 96 14:04

RE: inspection lighting

Darrell Bonzo

Fri, 09 Aug 96 13:34

Darrell Bonzo

Mon, 22 Jul 96 8:16

RE: quality data collection

Darrell Bonzo

Tue, 19 Nov 96 9:41

Darren Hitchcock

re: Re: ASSY: Teflon Board Repair

Darren Hitchcock

Thu, 9 May 96 9:33:01 PDT

re: Re: bonding FR4 to 3003/3010

Darren Hitchcock

Tue, 22 Oct 96 9:30:28 PDT

re: RE: Re: bonding FR4 to 3003/3010

Darren Hitchcock

Wed, 23 Oct 96 13:11:31 PDT

re: FW: DES:FAB:ASSY: Breakdown

Darren Hitchcock

Thu, 15 Aug 96 10:57:31 PDT

re: FAB/DES

Darren Hitchcock

Mon, 8 Jul 96 11:15:57 PDT

re: Re: FAB: Barrel Cracking due to Air Entrapment

Darren Hitchcock

Fri, 7 Jun 96 10:59:22 PDT

re: FAB: Copper Filled Via's

Darren Hitchcock

Thu, 22 Aug 96 17:23:43 PDT

re: FAB: Copper Filled Via's

Darren Hitchcock

Thu, 22 Aug 96 17:36:03 PDT

re: FAB: Copper Filled Via's

Darren Hitchcock

Mon, 26 Aug 96 17:15:12 PDT

re: Hi Temp Laminate

Darren Hitchcock

Thu, 25 Jul 96 11:47:40 PDT

re: FW: Hole breakout - request for opinions/assistance

Darren Hitchcock

Wed, 8 May 96 10:45:55 PDT

Mitsubishi BT laminate and prepreg

Darren Hitchcock

Wed, 24 Jul 96 15:17:50 PDT

re: RO40003 and RO4350

Darren Hitchcock

Thu, 3 Oct 96 3:11:54 EDT

re: Teflon-like materials

Darren Hitchcock

Fri, 12 Jul 96 15:52:04 PDT

Daugherty, Dale @JOCY

ASSY: Clamps for Wave Solder Pallets

Daugherty, Dale @JOCY

Thu, 14 Nov 1996 16:16:00 -0500

Dave Malanchk

Can This Improvement to TechNet be Made?

Dave Malanchk

Fri, 29 Mar 1996 08:13:33 -0500

Re: fwd: FAB: Tenting Au/Ni vias with LPI?

Dave Malanchk

Wed, 3 Apr 1996 15:45:36 -0500

Re: Test Point Coverage

Dave Malanchk

Fri, 29 Mar 1996 11:35:21 -0500

Dave Robertson

Position Wanted

Dave Robertson

Tue, 5 Nov 1996 17:15:33 -0500 (EST)

Dave Rosato ()

Dry Film adhesion

Dave Rosato ()

Fri, 23 Feb 1996 09:35:49

Dave Rosato

CMI XRF Troubles

Dave Rosato

Tue, 27 Feb 1996 09:01:33

Dave Von Tersch

FW: JTAG Testing

Dave Von Tersch

Mon, 18 Nov 1996 17:03:00 -0600

David Anderson

Re: Entek

David Anderson

Thu, 03 Oct 1996 09:15:30 -0500

Flux Info

David Anderson

Mon, 23 Sep 1996 16:39:00 -0500

Re:MRA process

David Anderson

Mon, 26 Aug 1996 15:05:00 -0500

David Arivett

Dewetting & Pumice Scrub

David Arivett

Thu, 19 Sep 1996 15:06:04 -0500 (CDT)

direct plate & imaging

David Arivett

Mon, 1 Jul 1996 10:22:26 -0500 (CDT)

Dry Film Resist Test

David Arivett

Wed, 10 Jul 1996 10:59:26 -0500 (CDT)

Re: Dry Film Resist Test

David Arivett

Wed, 10 Jul 1996 11:00:35 -0500 (CDT)

FAB or DES: Z-Axis expansion

David Arivett

Thu, 5 Sep 1996 10:08:56 -0500 (CDT)

FAB: Compositech laminate

David Arivett

Fri, 20 Dec 1996 08:41:21 -0600 (CST)

Re: FAB: Electroless Nickel - Immersion Gold

David Arivett

Fri, 12 Jul 1996 10:12:31 -0500 (CDT)

FAB: Gold Porosity Testing

David Arivett

Thu, 22 Aug 1996 13:51:32 -0500 (CDT)

FAB: Ionic test vs SIR

David Arivett

Sun, 20 Oct 1996 16:07:01 -0500 (CDT)

Re: Interest in SIR Workshop

David Arivett

Tue, 10 Dec 1996 17:49:36 -0600 (CST)

Re[3]: Soldermask peeling

David Arivett

Tue, 10 Dec 1996 08:54:48 -0600 (CST)

David Bergman

Re: ADMIN: IPC-CF-148

David Bergman

Tue, 18 Jun 1996 09:59:13 -0500 (CDT)

Re: Alternatives to Bromine in Flame Retardants

David Bergman

Fri, 19 Jan 1996 17:42:24 -0600 (CST)

Re: Aspect Ratios

David Bergman

Tue, 31 Dec 1996 16:05:41 -0600 (CST)

Re: ass: axial

David Bergman

Mon, 20 May 1996 12:47:37 -0500 (CDT)

Assy/Fab SIR handbook available for comment.

David Bergman

Thu, 28 Mar 1996 11:12:49 -0600 (CST)

Re: re:ASSY: CD ROM Training in SMT

David Bergman

Fri, 7 Jun 1996 10:28:24 -0500 (CDT)

ASSY: SOIC'S IN WAVESOLDERING (fwd)

David Bergman

Tue, 9 Apr 1996 10:45:55 -0500 (CDT)

David Bergman

Tue, 21 May 1996 17:42:10 -0500 (CDT)

Re: B-24 CCOUON

David Bergman

Mon, 19 Feb 1996 16:32:31 -0600 (CST)

Re: BGA

David Bergman

Tue, 26 Nov 1996 08:56:14 -0600 (CST)

Re: Compliancenet

David Bergman

Fri, 12 Jan 1996 08:29:01 -0600 (CST)

David Bergman

Thu, 8 Feb 1996 10:38:44 -0600 (CST)

Re: DES/FAB: IPC-D-949 Solder Coat Thickness

David Bergman

Fri, 9 Feb 1996 08:47:44 -0600 (CST)

Re: Definitions

David Bergman

Wed, 15 May 1996 07:55:02 -0500 (CDT)

David Bergman

Sat, 4 May 1996 13:59:12 -0500 (CDT)

Re: Dielectric/plated barrel separation in PWB holes

David Bergman

Wed, 18 Sep 1996 22:57:06 -0500 (CDT)

Re: Editors/Publishers (fwd

David Bergman

Fri, 5 Jan 1996 10:38:27 -0600 (CST)

Re: EQUINOX

David Bergman

Fri, 29 Mar 1996 10:41:50 -0600 (CST)

Re: FAB/ASSY: Lifted land criteria

David Bergman

Tue, 16 Jul 1996 14:57:31 -0500 (CDT)

FAB/Des - Flex Circuits

David Bergman

Mon, 17 Jun 1996 15:53:10 -0500 (CDT)

Re: FAB: Commercial sources for "weapons complex" boards

David Bergman

Tue, 13 Aug 1996 22:51:51 -0500 (CDT)

Fab: Drill Bit Web Thickness

David Bergman

Mon, 1 Apr 1996 13:04:01 -0600 (CST)

Re: FAB: Fabrication Houses in Phillipines

David Bergman

Mon, 29 Jul 1996 09:08:18 -0500 (CDT)

Re: fab: Multilayer Test Coupons

David Bergman

Thu, 10 Oct 1996 13:26:39 -0500 (CDT)

FAB: Tin Lead etch resists (fwd)

David Bergman

Fri, 25 Oct 1996 16:34:13 -0500 (CDT)

Re: Fabrication Qualification Profile

David Bergman

Thu, 8 Feb 1996 12:49:52 -0600 (CST)

Re: Flexible circuit manufacturing

David Bergman

Tue, 23 Jul 1996 15:16:33 -0500 (CDT)

GEN Milspex & JEDEC URL

David Bergman

Mon, 11 Nov 1996 08:57:53 -0600 (CST)

GEN: ISO-9000 the next step?

David Bergman

Mon, 7 Oct 1996 14:25:12 -0500 (CDT)

GEN: ISO-9000 the next step?

David Bergman

Mon, 7 Oct 1996 14:25:12 -0500 (CDT)

HS codes

David Bergman

Thu, 8 Aug 1996 14:54:19 -0500 (CDT)

Re: IPC 804

David Bergman

Mon, 25 Mar 1996 13:19:35 -0600 (CST)

Re: IPC Documents

David Bergman

Fri, 19 Jan 1996 17:37:01 -0600 (CST)

IPC Printed Circuits Expo '97 Call for Papers

David Bergman

Wed, 24 Jul 1996 16:22:16 -0500 (CDT)

Re: IPC Publications

David Bergman

Mon, 19 Aug 1996 08:27:06 -0500 (CDT)

Re: IPC SPEC FAMILY TREE

David Bergman

Tue, 13 Aug 1996 23:10:47 -0500 (CDT)

Its that time of year (fwd)

David Bergman

Tue, 24 Dec 1996 15:24:52 -0600 (CST)

Job opportunity: IPC

David Bergman

Fri, 12 Apr 1996 17:20:16 -0500 (CDT)

Re: Lifted pads and traces

David Bergman

Fri, 27 Dec 1996 15:02:05 -0600 (CST)

Re: Mil Std 2000

David Bergman

Sun, 25 Aug 1996 22:21:51 -0500 (CDT)

Re: NASA rework study

David Bergman

Tue, 9 Jan 1996 09:07:42 -0600 (CST)

Re: NEWSFLASH!!

David Bergman

Mon, 12 Aug 1996 07:48:26 -0500 (CDT)

Re: Padless plated thru holes

David Bergman

Thu, 10 Oct 1996 13:21:44 -0500 (CDT)

Re: PCB Manufacturing Standards

David Bergman

Mon, 29 Apr 1996 07:41:15 -0500 (CDT)

Placement of Semiconductor chips (fwd)

David Bergman

Tue, 1 Oct 1996 10:11:55 -0500 (CDT)

Re: Soldermask Test Guru

David Bergman

Mon, 26 Aug 1996 17:24:15 -0500 (CDT)

Re: TCE

David Bergman

Wed, 27 Mar 1996 07:28:21 -0600 (CST)

Re: Technical paper

David Bergman

Fri, 23 Aug 1996 07:08:44 -0500 (CDT)

Re: Tin-lead plating thickness

David Bergman

Wed, 25 Sep 1996 09:09:15 -0500 (CDT)

Re: Unfused Solder and/or Tin

David Bergman

Thu, 17 Oct 1996 12:17:21 -0500 (CDT)

Re: Wave Soldering !!! update !!!

David Bergman

Thu, 18 Apr 1996 14:51:26 -0500 (CDT)

David Boggs

re: ASS: Storeage of PWB -Reply

David Boggs

Wed, 15 May 96 14:29:49 PDT

FAB: soldermask plugged vias

David Boggs

Tue, 23 Jul 96 7:52:43 PDT

David Christopher Whalley

Re: Employment Opportunities

David Christopher Whalley

Mon, 29 Jan 96 09:17:25 gmt

Re: German-English Dictionary

David Christopher Whalley

Wed, 24 Jan 96 10:10:54 gmt

Re: Where is John Lau

David Christopher Whalley

Mon, 8 Jan 96 10:21:11 gmt

David E Kelly

Ag or Pd alternative to HASL inquiry

David E Kelly

20 Sep 1996 11:59:50 -0700

David Estes

Fab - RB-276 with clarification

David Estes

Tue, 28 May 1996 15:17:29 -0500 (CDT)

Re: Fab - RB-276?

David Estes

Tue, 28 May 1996 15:12:37 -0500 (CDT)

FAB: Basic Fab. Tech. - 2 oz copper boards

David Estes

Fri, 10 May 1996 14:47:33 -0500 (CDT)

FAB: Cyanate-Ester mil-spec mfr's

David Estes

Wed, 24 Apr 1996 15:59:38 -0500 (CDT)

Re: FAB: Edge Plating

David Estes

Thu, 16 May 1996 14:21:04 -0500 (CDT)

FAB: Flash Gold finish

David Estes

Wed, 24 Apr 1996 10:07:29 -0500 (CDT)

Fab: Getek Material

David Estes

Wed, 5 Jun 1996 08:00:26 -0500 (CDT)

FAB: Rolled solder response

David Estes

Fri, 9 Aug 1996 09:20:23 -0500 (CDT)

Fab? (re: Teflon)

David Estes

Thu, 12 Sep 1996 14:23:19 -0700

IPC SPEC FAMILY TREE

David Estes

Wed, 14 Aug 1996 07:37:56 -0500 (CDT)

Re: NEPCON SW

David Estes

Tue, 24 Sep 1996 13:25:35 -0700

david hanley

Laminating GR-5

david hanley

Thu, 03 Oct 1996 09:01:59 -0500

David Hoover

FAB and DES: Subject: Design for Manufacture? (Zo)

David Hoover

Sun, 1 Dec 1996 20:32:38 -0800

FW: FAB DES HIGH SPEED DESIGNS ON FR-4

David Hoover

Sat, 7 Dec 1996 16:13:37 -0800

FAB:Re: re: test: FLYING PROBE VS. HARD TOOLING

David Hoover

Fri, 13 Dec 1996 19:05:54 -0800

Blind or Burried Via vs Number of Layers in PWB

David Hoover

Fri, 20 Dec 1996 06:30:19 -0800

David M Fulmer

Analog guard rings

David M Fulmer

Wed, 21 Aug 1996 14:06:29 PST

David Malanchuk

David Malanchuk

Tue, 20 Aug 1996 20:19:53 -0400

DAVID MANDER

Employment Opportunity

DAVID MANDER

Fri, 12 Jan 1996 14:26:59 EST

David Millier

wave solder and reflow fixture technology

David Millier

Fri, 4 Oct 1996 18:40:37 +0100

David Ricketts

Re: DSN: BGA DESIGN LAYOUT

David Ricketts

Fri, 14 Jun 1996 16:16:22 -0700 (PDT)

High Temp PCB

David Ricketts

Fri, 21 Jun 1996 18:33:45 -0700 (PDT)

David T. Novick

ASSY: Surface Mount Plastic Components

David T. Novick

Wed, 05 Jun 96 11:16:48 PST

Re: DESIGN: Tantalum failure modes

David T. Novick

Thu, 02 May 96 16:33:09 PST

David Ta

BGA Reliability -- JPL Consortium Investigating BGA for NASA Use

David Ta

Wed, 21 Feb 96 13:01:37 -800

David Tandy

Anyone using AlphaLevel?

David Tandy

Mon, 2 Dec 96 13:58:17 GMT

Inner layer PAD Suppression or NOT?

David Tandy

Thu, 26 Sep 96 07:47:56 BST

Silver Ink Screen Print.

David Tandy

Thu, 14 Nov 96 12:55:48 GMT

Re: assy: matte or glossy soldermask? -Reply/question

David Tandy

Thu, 5 Dec 96 09:40:08 GMT

David Wolff

quality and delivery

David Wolff

Tue, 29 Oct 1996 15:05:20 -0500 (EST)

DavidRiviere

DavidRiviere

Wed, 28 Aug 96 09:39:59 PST

Re: ASSY: SMT BOARDS ASSMEBLY ISSUE...

DavidRiviere

Wed, 11 Sep 96 14:17:24 PST

Davis Benjamin L

Question on Current carrying charts

Davis Benjamin L

Tue, 08 Oct 1996 09:00:29 -0500

Davis, Ben L.

RE: 4 vs 6 layer

Davis, Ben L.

Tue, 09 Jul 1996 08:49:00 EDT

DAVY.J.G-

Re: "Average" solder defect rate

DAVY.J.G-

Thu, 12 Dec 1996 15:20:36 -0500

Assisted visual inspection of fine-pitch solder connections

DAVY.J.G-

Fri, 6 Dec 1996 11:33:07 -0500

RE: ASSM: Top fillet formation

DAVY.J.G-

Mon, 23 Dec 1996 10:51:34 -0500

ddhillma

Re: "Drape" of Material

ddhillma

Mon, 25 Nov 96 09:11:37 cst

Re: # of Layers?

ddhillma

Wed, 11 Dec 96 17:16:15 cst

Re[2]: (ASSEM) Wave soldering SOT-23

ddhillma

Thu, 12 Dec 96 07:42:27 cst

Re: ...no subject...

ddhillma

Fri, 24 May 96 04:19:11 cst

Re: Adipic acid

ddhillma

Wed, 02 Oct 96 05:16:38 cst

Re: Ag or Pd alternative to HASL inquiry

ddhillma

Mon, 23 Sep 96 07:54:32 cst

Re[2]: Anyone using AlphaLevel

ddhillma

Tue, 16 Apr 96 19:25:48 cst

ddhillma

Tue, 03 Dec 96 11:41:36 cst

Re: Anyone using AlphaLevel?

ddhillma

Mon, 02 Dec 96 09:54:44 cst

Re: Assembly: OSP and Bake.

ddhillma

Wed, 19 Jun 96 15:31:25 cst

Assembly: Silver PWA Finishes

ddhillma

Tue, 09 Jul 96 09:05:16 cst

Assembly: Solder Paste Life Extension

ddhillma

Tue, 16 Apr 96 11:59:01 cst

Re: ASSY More info on Omegameter 600SMD problem

ddhillma

Fri, 17 May 96 14:51:12 cst

Re: ASSY non-rosin flux and MIL

ddhillma

Wed, 08 May 96 08:32:18 cst

Re: ASSY Omegameter 600SMD

ddhillma

Mon, 13 May 96 22:02:53 cst

Re: ASSY reflow profile expert software.

ddhillma

Tue, 18 Jun 96 10:09:10 cst

Re[2]: ASSY- Laser Ash?

ddhillma

Fri, 07 Jun 96 08:20:12 cst

Re: ASSY-Metal Stamping

ddhillma

Thu, 30 May 96 13:29:16 cst

Re[2]: ASSY/FAB: SnPb Oxidation

ddhillma

Mon, 18 Nov 96 15:40:12 cst

Re: ASSY: Alloy 42 Plating Questions

ddhillma

Wed, 16 Oct 96 13:08:26 cst

Re: ASSY: BGA SOLDERABILITY

ddhillma

Fri, 15 Nov 96 15:12:31 cst

Re: ASSY: Bismuth Solder

ddhillma

Wed, 31 Jul 96 09:04:36 cst

Re: Assy: Cleaning solder pot

ddhillma

Tue, 09 Jul 96 14:36:34 cst

ddhillma

Fri, 13 Dec 96 06:42:44 cst

Re: ASSY: DSN: Conductor to Land ratio

ddhillma

Mon, 18 Nov 96 08:35:00 cst

Re: Assy: Dull solder joint - Gold

ddhillma

Fri, 29 Nov 96 10:30:26 cst

Re: ASSY: Gold plated terminations

ddhillma

Wed, 21 Aug 96 15:50:23 cst

Re: ASSY: Gold-to-Gold Soldering

ddhillma

Tue, 01 Oct 96 08:18:18 cst

Re: assy: matte or glossy soldermask?

ddhillma

Wed, 28 Aug 96 08:17:27 cst

ddhillma

Fri, 06 Dec 96 08:03:55 cst

Re[2]: ASSY: Rusty Reflow oven.

ddhillma

Fri, 06 Dec 96 08:07:36 cst

Re[2]: ASSY: MELF's

ddhillma

Fri, 06 Dec 96 08:46:40 cst

ddhillma

Wed, 15 May 96 17:40:44 cst

Re: Assy: Semi-Auto Fine Pitch Rework Machines

ddhillma

Fri, 19 Apr 96 17:25:26 cst

Re: ASSY: SMT Soldering to Nickle pads

ddhillma

Mon, 18 Nov 96 15:05:30 cst

Re: ASSY: SOIC'S IN WAVESOLDERING (fwd)

ddhillma

Tue, 09 Apr 96 13:45:50 cst

Re: ASSY: Solder Fatigue Data Sn40 - Sn50

ddhillma

Tue, 09 Jul 96 08:58:52 cst

Re: Assy: Solder Paste in Wave Solder Pots...

ddhillma

Thu, 12 Dec 96 17:00:19 cst

Re: ASSY: Solderability - Storage of Tin Plated Parts

ddhillma

Wed, 16 Oct 96 13:14:58 cst

Re: ASSY: Solderability problems with Intel 28F004 TSOPs

ddhillma

Mon, 23 Sep 96 08:19:20 cst

Re: ASSY: Soldering to Nickel

ddhillma

Thu, 09 May 96 07:48:58 cst

Re: ASSY: Solderpaste In Through-Hole Process

ddhillma

Thu, 11 Apr 96 08:18:27 cst

Re: ASSY: Teflon Board Repair

ddhillma

Thu, 09 May 96 08:46:07 cst

Re: ASSY: Vertical angle

ddhillma

Thu, 09 May 96 11:59:36 cst

Re: assy:gold/indum/solder

ddhillma

Wed, 22 May 96 12:29:17 cst

ddhillma

Thu, 30 May 96 13:53:11 cst

Re: ASSY:Oil coating on components.

ddhillma

Wed, 21 Aug 96 15:06:36 cst

Re: ASSY:PCB-rework

ddhillma

Wed, 06 Nov 96 07:34:40 cst

Re: ASSY:Solder Wicking,Fine Pitch Leads

ddhillma

Thu, 19 Sep 96 09:11:07 cst

Re: Assy:SPC of cleaning process

ddhillma

Mon, 03 Jun 96 10:13:47 cst

Re: assy:spreading of paste flux

ddhillma

Sun, 24 Nov 96 15:33:53 cst

Re: ASSY:Workmanship Standards For Intrusive Reflow

ddhillma

Wed, 12 Jun 96 08:07:38 cst

Re[2]: BGA assembly.

ddhillma

Tue, 10 Dec 96 10:42:54 cst

Re: bismuth based solder

ddhillma

Tue, 05 Nov 96 17:26:49 cst

Re: Brown resin like residue in solder bath

ddhillma

Wed, 11 Dec 96 17:06:37 cst

Re[2]: Brown resin like residue in solder bath

ddhillma

Thu, 12 Dec 96 16:46:29 cst

Re: Bubbles in Conformal Coating

ddhillma

Mon, 29 Jul 96 08:39:31 cst

Re: Changing of reflow profile.

ddhillma

Mon, 01 Jul 96 11:28:44 cst

Re: copper gold galvanic during OSP application

ddhillma

Thu, 19 Sep 96 08:58:14 cst

Re: cracked solder joints with alloy 42 tsops

ddhillma

Wed, 09 Oct 96 08:11:37 cst

Re: DES> Connector Reliability

ddhillma

Tue, 30 Apr 96 08:44:14 cst

Design

ddhillma

Mon, 16 Sep 96 09:54:29 cst

Re[2]: Design

ddhillma

Tue, 17 Sep 96 12:59:48 cst

Re: Dewetting & Pumice Scrub

ddhillma

Wed, 18 Sep 96 13:22:31 cst

Re: Dross on CCA

ddhillma

Thu, 19 Dec 96 06:38:30 cst

Re: Electroless Nickel

ddhillma

Fri, 10 May 96 08:03:10 cst

Re: entek

ddhillma

Fri, 11 Oct 96 09:43:44 cst

Re: FAB / ASSY

ddhillma

Thu, 13 Jun 96 07:33:57 cst

Re: Fab or Assy: Instron Tester

ddhillma

Thu, 02 May 96 16:23:45 cst

Re[2]: FAB Re Tin plt. instead of Sn/Pb

ddhillma

Fri, 21 Jun 96 07:22:46 cst

Re[2]: Fab/Assy : Nitorgen/Inert Storage Chamber/Cabinet

ddhillma

Mon, 29 Jul 96 09:17:12 cst

Re: FAB: Board Analysis - One More Time

ddhillma

Fri, 13 Dec 96 14:56:39 cst

Re: FAB: Immersion gold inquiry

ddhillma

Mon, 20 May 96 08:13:42 cst

ddhillma

Fri, 19 Jul 96 18:18:07 cst

Re: FAB: Independent Lab for Board Residue Analysis

ddhillma

Thu, 12 Dec 96 17:02:20 cst

Re: FAB: organic contam. on wire-bond gold

ddhillma

Fri, 29 Nov 96 10:13:32 cst

Re: FAB: silver vs. HASL/OSPs

ddhillma

Tue, 28 May 96 08:50:44 cst

ddhillma

Tue, 10 Dec 96 16:19:41 cst

Re: FAB: Wire-bondable gold

ddhillma

Thu, 01 Aug 96 14:23:10 cst

Re: fab: Solderability

ddhillma

Mon, 14 Oct 96 08:20:09 cst

ddhillma

Thu, 14 Nov 96 09:37:15 cst

Re: FAB:Electroless Ni/Immersion Au & press-fit connectors

ddhillma

Fri, 22 Nov 96 08:03:23 cst

Re: Frear, Jones, and Kinsman "Solder Mechanics" text.

ddhillma

Fri, 01 Nov 96 09:47:15 cst

Re[2]: flexible circuit

ddhillma

Wed, 18 Dec 96 09:13:37 cst

ddhillma

Thu, 30 May 96 16:35:36 cst

Re: FWD>assy: hot bar solder jo

ddhillma

Thu, 11 Jul 96 08:28:02 cst

Re: GEN: Adhesives

ddhillma

Fri, 07 Jun 96 14:36:34 cst

Re: GEN: Heat - Sealing?

ddhillma

Mon, 13 May 96 10:32:13 cst

Re[2]: GEN: Heat - Sealing?

ddhillma

Mon, 13 May 96 21:59:28 cst

Re: GEN: J-STD-001 SOLDERABILITY

ddhillma

Mon, 30 Sep 96 08:29:04 cst

Re: GEN: MIL-HDBK-217

ddhillma

Tue, 04 Jun 96 15:06:47 cst

Re: GEN: Nitrogen quality for storage cabinets...

ddhillma

Tue, 17 Dec 96 16:39:31 cst

Re: Glue and Fine Pitch Devices

ddhillma

Fri, 20 Dec 96 08:26:59 cst

Re[2]: GEN: Rectifiers

ddhillma

Fri, 20 Dec 96 11:23:16 cst

Re: gen: thermal mass

ddhillma

Thu, 05 Dec 96 12:05:47 cst

ddhillma

Mon, 26 Aug 96 11:03:06 cst

Re: gold finger porosity requirements

ddhillma

Thu, 06 Jun 96 11:48:55 cst

Re[2]: Gold Migration into Tin/Lead

ddhillma

Mon, 02 Dec 96 17:21:15 cst

Re[2]: goldfinish on PC boards

ddhillma

Wed, 06 Nov 96 07:17:12 cst

Re[2]: Heat Seal/Bake

ddhillma

Fri, 17 May 96 15:11:15 cst

Re: immersion/electroless tin plating

ddhillma

Tue, 30 Jul 96 13:20:13 cst

Re: Impedance Spectroscopy

ddhillma

Wed, 04 Dec 96 08:17:15 cst

Re[3]: Impedance Spectroscopy

ddhillma

Thu, 05 Dec 96 06:57:57 cst

Re: Info on PADS

ddhillma

Mon, 22 Jul 96 11:33:05 cst

Re: Interest in SIR Workshop

ddhillma

Tue, 10 Dec 96 12:57:56 cst

Re: IPC specs for e'less Ni/imm Au

ddhillma

Fri, 26 Apr 96 07:37:36 cst

Re: Long Term Storage of PCB's

ddhillma

Mon, 18 Nov 96 09:15:35 cst

Re: Material Properties for 72Ag/28Cu brazing alloy

ddhillma

Thu, 12 Dec 96 07:28:18 cst

Re: meniscograph reply - hey Dave Hillman

ddhillma

Wed, 29 May 96 10:11:11 cst

Re: microsections

ddhillma

Fri, 27 Sep 96 06:11:37 cst

Re: moisture and insulation resistance testing

ddhillma

Wed, 13 Nov 96 13:01:10 cst

Re: Nepcon Workshops 1997

ddhillma

Mon, 09 Dec 96 16:02:38 cst

Re[2]: Nepcon Workshops 1997

ddhillma

Tue, 10 Dec 96 08:54:33 cst

Re: Nitrogen in solder process

ddhillma

Thu, 20 Jun 96 16:27:20 cst

Re[3]: No clean and RF

ddhillma

Fri, 22 Nov 96 16:37:49 cst

Re: Oilly stuff after lamination

ddhillma

Fri, 07 Jun 96 15:16:17 cst

Re: OMEGA WAVE

ddhillma

Wed, 22 May 96 17:17:15 cst

Re: Open Diodes

ddhillma

Fri, 12 Apr 96 07:57:01 cst

Re: Palladium finish

ddhillma

Tue, 28 May 96 08:44:41 cst

Re: Palladium finish

ddhillma

Tue, 28 May 96 09:04:07 cst

Re: PCB Assy-Wave Solder

ddhillma

Mon, 17 Jun 96 11:49:19 cst

Re: PCB board age

ddhillma

Tue, 17 Sep 96 09:32:18 cst

Re[3]: PCB board age

ddhillma

Tue, 17 Sep 96 16:34:41 cst

Re: Peak Soldering Temp.

ddhillma

Fri, 13 Dec 96 06:24:11 cst

Re: Pin Headers

ddhillma

Thu, 18 Apr 96 08:22:35 cst

Re: PWB flexing and SMT components

ddhillma

Wed, 13 Nov 96 05:43:13 cst

ddhillma

Wed, 19 Jun 96 15:12:28 cst

Re[2]: Rate of Aluminium in Solder Bath.

ddhillma

Fri, 07 Jun 96 16:05:51 cst

Re: Re Nepcon Workshops 1997

ddhillma

Fri, 13 Dec 96 06:07:16 cst

Re: RELIABILITY: Correlations for Accelerated Test Condition

ddhillma

Fri, 20 Sep 96 08:57:04 cst

Re: Request

ddhillma

Tue, 05 Nov 96 17:14:18 cst

Re: REUSABLE SRENCIL FRAMES

ddhillma

Wed, 18 Dec 96 08:06:02 cst

Re[5]: silver vs. HASL/OSPs

ddhillma

Wed, 03 Jul 96 08:19:37 cst

ddhillma

Mon, 16 Dec 96 08:38:37 cst

Re: SIR questions from Japanese colleague

ddhillma

Thu, 13 Jun 96 07:25:20 cst

Re: smt / pcb or flex assembly ?

ddhillma

Thu, 19 Dec 96 18:06:57 cst

Re: SMT Solder Joint Film

ddhillma

Tue, 15 Oct 96 16:34:22 cst

Re[2]: SnPb Oxidation

ddhillma

Tue, 19 Nov 96 17:46:35 cst

Re[2]: Solder Paste Plastic or Eutectic

ddhillma

Mon, 25 Nov 96 09:03:11 cst

Re[4]: Solder Paste Plastic or Eutectic (#975031)

ddhillma

Mon, 25 Nov 96 17:08:19 cst

Re: SOLDER SPLASH ON GOLD FINGER

ddhillma

Thu, 27 Jun 96 10:32:14 cst

Re[2]: Solderability of Electoless Ni

ddhillma

Mon, 29 Jul 96 09:57:28 cst

Re: solderability test for ENIG PCB finish

ddhillma

Sun, 15 Dec 96 09:43:15 cst

Re[3]: solderability test for ENIG PCB finish

ddhillma

Mon, 16 Dec 96 10:46:02 cst

Re[2]: Soldermask Tented Vias

ddhillma

Wed, 19 Jun 96 16:02:21 cst

Re[5]: Soldermask Tented Vias

ddhillma

Thu, 20 Jun 96 11:11:20 cst

Re: Sub: Solder Paste Plastic or Eutectic

ddhillma

Fri, 22 Nov 96 12:08:06 cst

Re[2]: Sub: Solder Paste Plastic or Eutectic

ddhillma

Sun, 24 Nov 96 09:20:01 cst

Re: Subj: No-clean Repair

ddhillma

Wed, 06 Nov 96 17:16:01 cst

Re: Subj: S.P. Precision Contact

ddhillma

Wed, 06 Nov 96 13:04:08 cst

Re: Surface Tension

ddhillma

Mon, 07 Oct 96 10:50:25 cst

Re: Technical queries previously submitted via internet

ddhillma

Wed, 27 Nov 96 07:40:15 cst

Re: Temp. and RH

ddhillma

Mon, 08 Jul 96 15:44:04 cst

Re: Terminal Solderability

ddhillma

Thu, 17 Oct 96 17:45:12 cst

Re: The Ultimate in Flooring

ddhillma

Wed, 26 Jun 96 14:53:58 cst

Re: Tin electroplate finish for PCBs

ddhillma

Thu, 18 Apr 96 08:46:29 cst

Re: TO220 reflow soldering

ddhillma

Thu, 27 Jun 96 10:24:19 cst

Re: Tombstoning 0805 Film Caps

ddhillma

Tue, 17 Dec 96 16:33:34 cst

Re: Two sided SMA

ddhillma

Mon, 09 Dec 96 14:00:28 cst

Re[3]: Unfused Solder and/or Tin

ddhillma

Thu, 17 Oct 96 17:56:08 cst

Re[2]: Unidentified subject!

ddhillma

Wed, 20 Nov 96 17:09:02 cst

Re[2]: UV-vis Methods for Waste Treatment

ddhillma

Tue, 26 Nov 96 09:21:03 cst

Re[4]: UV-vis Methods for Waste Treatment

ddhillma

Tue, 26 Nov 96 14:30:02 cst

Re: Validating J-STD-001B

ddhillma

Fri, 01 Nov 96 09:22:55 cst

Re: Via Entrapment and LPI

ddhillma

Thu, 27 Jun 96 09:39:12 cst

Re: Wave soldering flux problems

ddhillma

Mon, 01 Jul 96 10:58:51 cst

Re: White residue between soldered leads

ddhillma

Tue, 07 May 96 16:23:55 cst

Re[2]: White residue between soldered leads

ddhillma

Wed, 08 May 96 08:08:06 cst

Re: White residue/lead oxide

ddhillma

Tue, 07 May 96 16:12:28 cst

Re[2]: ASSY: Polishing Fiducials

ddhillma

Sun, 15 Dec 96 09:12:32 cst

ddsulliv

ddsulliv

Wed, 13 Nov 96 10:34:12 cst

Re: diazo problems during lpi imaging

ddsulliv

Mon, 16 Dec 96 16:28:12 cst

Re: FAB:Controlled Z drilling for blind or buried vias

ddsulliv

Wed, 04 Dec 96 16:11:29 cst

ddsulliv

Mon, 18 Nov 96 08:20:32 cst

Re: GEN: Persulfate / Sulfuric Baths

ddsulliv

Mon, 09 Dec 96 08:58:34 cst

Re: In search of High Tec PCB Manufacturer for PTFE Material

ddsulliv

Wed, 27 Nov 96 08:16:22 cst

IPC-6013

ddsulliv

Wed, 11 Dec 96 18:07:13 cst

IPC-D-275

ddsulliv

Thu, 12 Dec 96 18:05:01 cst

IPC-RF-245 as a M/L Flex Spec

ddsulliv

Mon, 02 Dec 96 16:53:28 cst

Re: new hole breakout allowances

ddsulliv

Thu, 19 Dec 96 17:21:24 cst

Dean Barham, x3805/p-0217

ddsulliv

Fri, 20 Dec 96 11:13:10 cst

plot solutions

Dean Barham, x3805/p-0217

Mon, 11 Mar 1996 14:05:05 -0500 (EST)

Re: Soldermask webs

Dean Barham, x3805/p-0217

Fri, 10 May 1996 12:09:12 -0500 (EST)

Dean R. Cornstubble

FAB: Fwd: Printed Circuit Board Lamination Process

Dean R. Cornstubble

Wed, 22 May 1996 13:18:25 -0400 (EDT)

PCB Laminates

Dean R. Cornstubble

Wed, 24 Apr 1996 10:24:49 -0400 (EDT)

Debabrata Pal

Re:Sonascan

Debabrata Pal

Wed, 24 Apr 1996 17:16:07 -0400 (EDT)

DEBBRA ROGERS

Chip on board

DEBBRA ROGERS

Fri, 15 Mar 1996 10:58:45 -0800

Delsen Testing Laboratories

Delsen Testing Laboratories

Wed, 18 Dec 1996 10:02:43 -0800

Delsen

Surface treatment prior to plating

Delsen

Thu, 06 Jun 1996 13:53:47 -0700

Denis Dionne

Denis Dionne

Sun, 28 Jan 1996 10:24:50 -0500

Re: WIrebond Gold?

Denis Dionne

Thu, 08 Feb 1996 22:41:25 -0500

DENNY PULVINO

Re: DES: New Material?

DENNY PULVINO

Fri, 10 May 96 15:07:50 PST

Re: GEN: PCB sales distribution

DENNY PULVINO

Mon, 30 Dec 96 08:11:03 PST

Re: Teflon board with a metal substrate

DENNY PULVINO

Mon, 21 Oct 96 07:24:04 PST

Derris Chew-CTUA021

compensation machine

Derris Chew-CTUA021

Thu, 12 Sep 1996 21:52:00 -0500

RE: FAB: Film compensation

Derris Chew-CTUA021

Mon, 12 Aug 1996 8:49:59 -0500

Devin Hosea

Ball Grid Array Back End Processing

Devin Hosea

Sat, 13 Jul 1996 13:37:59 +0000

Dewayne Dunn

Glass Epoxy Gold Finger Guards

Dewayne Dunn

Fri, 27 Dec 1996 15:57:25 -0600

dfawcett

Electroless Nickel

dfawcett

Thu, 09 May 96 17:09:47 PST

Dhawan, Ashok CA-WINPO2

Guideline on selection of stencil thickness for SMT

Dhawan, Ashok CA-WINPO2

Tue, 19 Nov 96 14:26:00 GMT

Guideline on selection of stencil thickness for SMT

Dhawan, Ashok CA-WINPO2

Tue, 19 Nov 96 14:26:00 GMT

FW: Guideline on selection of stencil thickness for SMT

Dhawan, Ashok CA-WINPO2

Tue, 19 Nov 96 14:41:00 GMT

SUB: Steve A --Solder Paste Plastic or Eutectic #975031

Dhawan, Ashok CA-WINPO2

Mon, 25 Nov 96 21:03:00 GMT

dhoppe

Re: Copper Pattern Plating Nodgles

dhoppe

Wed, 21 Aug 96 10:45:54 PST

Re[2]: Copper plating

dhoppe

Fri, 20 Dec 96 08:57:40 PST

Re: EQUINOX

dhoppe

Fri, 29 Mar 96 09:47:50 PST

Re: FAB: Brass Saddles (V-Blocks)

dhoppe

Tue, 27 Aug 96 16:45:33 PST

FAB: Finding a Solderpot

dhoppe

Thu, 14 Nov 96 09:33:06 PST

Fungal contamination

dhoppe

Tue, 13 Feb 96 14:10:04 PST

Re[2]: PVC in equipment construction

dhoppe

Fri, 20 Dec 96 09:12:09 PST

dhoppe

Fri, 01 Nov 96 10:58:12 PST

Thieving

dhoppe

Wed, 01 May 96 13:21:51 PST

dhowell

Re: Compositech CL 200+

dhowell

Fri, 10 May 96 13:49:33 PST

Engineering Employment Opportunity

dhowell

Mon, 06 May 96 14:09:16 PST

Re: FAB: Double Treated Copper

dhowell

Tue, 18 Jun 96 15:15:23 PST

Re: FAB: Resin Coated Cu - Tech Ques's & Availability

dhowell

Mon, 20 May 96 13:34:45 PST

FAB:Cupric Chloride Etchant

dhowell

Tue, 13 Aug 96 08:33:08 PST

Re: Hi Temp Laminate

dhowell

Thu, 25 Jul 96 14:57:01 PST

Holiday Gift

dhowell

Mon, 16 Dec 96 19:58:32 PST

Re: Innerlayer defects.

dhowell

Thu, 05 Sep 96 08:20:26 PST

Re: WOVEN KEVLAR

dhowell

Mon, 30 Dec 96 08:58:49 PST

Dianne Boehm

Re: Mil-P-13949

Dianne Boehm

Mon, 4 Nov 96 14:43:56 PST

Dick Pond

ASSY: QFP Tape & Reel

Dick Pond

Thu, 19 Sep 1996 09:23:54 -0400

Re: CONNECTOR WAVE SOLDERING

Dick Pond

Tue, 13 Feb 1996 13:53:58 -0500

Re: DES/FAB/ASSEM: BATB = ?

Dick Pond

Mon, 22 Apr 1996 15:59:05 -0400

Flux Residue After Wave Cleaning

Dick Pond

Fri, 16 Feb 1996 12:18:34 -0500

Re: Latest Revision of the EIA-481 Spec.

Dick Pond

Thu, 29 Feb 1996 16:56:14 -0500

Re: solder pastes with water soluble flux

Dick Pond

Tue, 27 Feb 1996 10:18:39 -0500

didier abiven

contactless technologie for printed circuit boards

didier abiven

Wed, 28 Aug 1996 20:28:42 -0400 (EDT)

experience of wet lamination with Dstf or Mls copper laminate

didier abiven

Mon, 26 Aug 1996 22:02:30 -0400 (EDT)

Dieter Bergman

Re: What is an NECQ Audit?

Dieter Bergman

Sat, 6 Apr 1996 13:00:39 -0600 (CST)

Dill, Norm J

"J" Lead shear strength?

Dill, Norm J

Thu, 21 Mar 96 20:01:00 EST

"J" Lead shear strength?

Dill, Norm J

Thu, 21 Mar 96 21:11:00 EST

RE: ASSY - Padless Plated Thru Holes

Dill, Norm J

Wed, 13 Nov 96 10:43:00 EST

ASSY: Fine Pitch Dewetting?

Dill, Norm J

Thu, 25 Apr 96 09:50:00 DST

FW: ASSY: Fine Pitch Dewetting?

Dill, Norm J

Fri, 26 Apr 96 12:38:00 DST

FW: FW: ASSY: Fine Pitch Dewetting?

Dill, Norm J

Mon, 29 Apr 96 09:53:00 DST

FW: ASSY: Fine Pitch Dewetting?

Dill, Norm J

Tue, 30 Apr 96 10:57:00 DST

ASSY: Laser Ash?

Dill, Norm J

Wed, 05 Jun 96 18:36:00 DST

ASSY: Moisture sensitivity?

Dill, Norm J

Thu, 02 May 96 15:15:00 DST

FW: ASSY: Packaging - Heat Sealing?

Dill, Norm J

Mon, 22 Jul 96 13:08:00 DST

FW: ASSY: Smocks, are they necessary?

Dill, Norm J

Fri, 22 Mar 96 18:06:00 EST

FW: ASSY: Teflon Board Repair

Dill, Norm J

Thu, 09 May 96 08:49:00 DST

FW: DES:FAB:ASSY: Breakdown

Dill, Norm J

Tue, 13 Aug 96 12:15:00 DST

FW: EQUINOX

Dill, Norm J

Fri, 29 Mar 96 13:51:00 EST

FAB: Fine Pitch solder thickness w/HASL

Dill, Norm J

Mon, 01 Apr 96 11:13:00 EST

FW: FAB: IMAGE ROOM CLEANLINESS

Dill, Norm J

Tue, 15 Oct 96 18:03:00 DST

FAB: Tenting Au/Ni vias with LPI?

Dill, Norm J

Wed, 03 Apr 96 07:44:00 EST

FW: Flux contamination in Pentium Socket

Dill, Norm J

Tue, 07 May 96 11:07:00 DST

GEN: Carbon Ink vs. Gold Reliability

Dill, Norm J

Thu, 11 Jul 96 16:39:00 DST

GEN: Heat - Sealing?

Dill, Norm J

Fri, 10 May 96 16:53:00 DST

FW: Gold Flash on PWB's

Dill, Norm J

Wed, 24 Apr 96 12:50:00 DST

FW: Hole breakout - request for opinions/assistance

Dill, Norm J

Wed, 08 May 96 12:03:00 DST

FW: Re[2]: Humidity Testing

Dill, Norm J

Thu, 11 Jul 96 12:46:00 DST

FW: Liability

Dill, Norm J

Tue, 02 Jul 96 12:55:00 DST

FW: FW: Liability

Dill, Norm J

Wed, 03 Jul 96 09:27:00 DST

FW: Nickel/Gold Immersion

Dill, Norm J

Fri, 29 Mar 96 12:51:00 EST

FW: PCB board age

Dill, Norm J

Tue, 17 Sep 96 12:04:00 DST

FW:Preferred PWB Surface for BGA

Dill, Norm J

Tue, 07 May 96 12:33:00 DST

FW: Re[3]: Soldermask Tented Vias

Dill, Norm J

Thu, 20 Jun 96 13:05:00 DST

FW: Soldermask webs

Dill, Norm J

Thu, 09 May 96 14:06:00 DST

FW: Unfused Solder and/or Tin

Dill, Norm J

Thu, 17 Oct 96 16:19:00 DST

FW: Warped - Don't want to scrap it.

Dill, Norm J

Fri, 29 Mar 96 13:22:00 EST

FW: Warped - Don't want to scrap it.

Dill, Norm J

Mon, 01 Apr 96 14:36:00 EST

FW: warped completed assemblies

Dill, Norm J

Tue, 27 Aug 96 13:31:00 DST

FW: White residue/lead oxide

Dill, Norm J

Tue, 07 May 96 12:06:00 DST

Re[2]: (Fwd) Seinfeldisms

Dill, Norm J

Mon, 16 Dec 96 13:18:00 EST

FW: X-outs on panels

Dill, Norm J

Wed, 31 Jul 96 10:37:00 DST

Dirk Bellamy

ASSY: Ultrasonics

Dirk Bellamy

Wed, 03 Jul 1996 10:56:23 -0400

Moisture Sensitivity

Dirk Bellamy

Thu, 27 Jun 1996 13:14:08 -0400

dmitchel

dmitchel

Thu, 25 Jul 96 16:47:26 PST

Re[2]: Assembly: Silver PWA Finishes

dmitchel

Thu, 11 Jul 96 15:31:32 PST

ASSY: Aramid material and baking

dmitchel

Thu, 20 Jun 96 11:45:07 PST

Re[2]: ASSY: SMT Shelf Life

dmitchel

Wed, 21 Aug 96 10:49:22 PST

Re[2]: Bare Board Test PCBs with BGAs

dmitchel

Tue, 13 Feb 96 09:54:12 PST

BELLCORE EXP Cu PAPER

dmitchel

Fri, 21 Jun 96 12:12:39 PST

Re: BGA

dmitchel

Thu, 11 Jan 96 06:37:18 PST

Re[3]: BGA

dmitchel

Fri, 12 Jan 96 08:58:45 PST

Re[2]: BGA Bare Board Testing?

dmitchel

Thu, 11 Jan 96 11:34:38 PST

Re[2]: BGA Pattern

dmitchel

Tue, 20 Feb 96 14:21:55 PST

Re: BGA's - one user's perspective

dmitchel

Fri, 12 Jan 96 16:12:22 PST

Re: depanelization

dmitchel

Fri, 26 Jan 96 10:22:51 PST

Re: Entech

dmitchel

Tue, 06 Aug 96 13:47:28 PST

Re[2]: Entech

dmitchel

Thu, 03 Oct 96 08:25:32 PST

Re[2]: Exposed Copper on Assem

dmitchel

Fri, 23 Feb 96 07:38:20 PST

Re: FAB: Emissivity

dmitchel

Tue, 17 Sep 96 15:51:11 PST

Re[2]: FAB: Fine Pitch solder thickness w/HASL

dmitchel

Wed, 03 Apr 96 08:49:14 PST

Re: Fab: Ultrasonic Flood Modules for Conveyorized Equipment

dmitchel

Tue, 18 Jun 96 07:39:53 PST

Re: FAB:Solder Finish Survey

dmitchel

Thu, 12 Apr 96 08:03:41 PST

Re[3]: FABRICATION: E-Test

dmitchel

Thu, 22 Feb 96 10:52:20 PST

Re: German-English Dictionary

dmitchel

Tue, 23 Jan 96 16:29:51 PST

Re: OSP Questions

dmitchel

Fri, 12 Jan 96 11:12:51 PST

Re[2]: REQ: Info on Entek Plus/NC Flux

dmitchel

Thu, 01 Feb 96 06:49:09 PST

Re: Sn-Pb etch

dmitchel

Wed, 24 Jan 96 12:58:32 PST

Re[2]: Sn-Pb etch

dmitchel

Thu, 25 Jan 96 06:45:53 PST

Re[3]: Soldermask Tented Vias

dmitchel

Wed, 19 Jun 96 17:23:25 PST

Dmitriy Sklyar

ADMIN: Please do not quote the digest.

Dmitriy Sklyar

Thu, 31 Oct 1996 10:34:30 -0600 (CST)

ADMIN: Re: job posting

Dmitriy Sklyar

Thu, 31 Oct 1996 09:56:24 -0600 (CST)

dmyers

Re[2]: FABRICATION: E-Test

dmyers

Thu, 22 Feb 96 08:50:23 PST

Don Moseley

Service for Mach-El wire bonders

Don Moseley

Thu, 12 Dec 1996 08:32:32 -0500 (EST)

Don Vischulis

Re: Re[3]: Assy/Fab: PCB Thickness

Don Vischulis

Mon, 03 Jun 1996 16:55:08 -0500

Re: Re[2]: ASSY: Post-wave Warpage

Don Vischulis

Fri, 17 May 1996 19:45:30 -0500

Re: DES: Thermal Relief From Ground Planes

Don Vischulis

Thu, 01 Aug 1996 21:03:55 -0500

Re: Reducing Rinse Water Flow Rates

Don Vischulis

Thu, 30 May 1996 21:54:28 -0500

Re: FWD>DES-ISOLATION

Don Vischulis

Thu, 30 May 1996 21:39:47 -0500

Re: Laminate Shrinkage

Don Vischulis

Thu, 09 May 1996 20:50:22 -0500

Re: Open vias problem

Don Vischulis

Fri, 17 May 1996 19:25:38 -0500

Don Vischulis

Tue, 23 Apr 1996 19:18:40 -0500

Re: Thin laminates (fwd)

Don Vischulis

Thu, 18 Jul 1996 22:14:59 -0500

Re: Tin electroplate finish for PCBs

Don Vischulis

Wed, 17 Apr 1996 22:12:44 -0500

Re: Walmart Supplies- Another Last Item

Don Vischulis

Thu, 26 Sep 1996 15:06:34 -0500

Donald Sanborn

fwd: Employment Opportunities

Donald Sanborn

13 Feb 96 11:05:20 EST

Employment Opportunity

Donald Sanborn

20 Feb 96 09:51:22 EST

donb

Re: Dupont Publications

donb

Wed, 19 Jun 96 06:29:04 EST

Fabrication - MIL-specs

donb

Wed, 29 May 96 11:52:38 EST

Re: FWD>FAB- MEASURING DEVICE F

donb

Fri, 03 May 96 12:47:09 EST

Looking for Impedance Software

donb

Fri, 26 Apr 96 10:05:51 EST

Re: MISC: drill files 1 or 2

donb

Wed, 25 Sep 96 14:38:29 EST

Quotation software

donb

Tue, 15 Oct 96 15:00:19 EST

Doreen Fisher

Re: Automated Defect Scatter Diagrams ?

Doreen Fisher

31 Dec 96 12:10 CST

Doug Burstedt

-D Circuit Boards (Vendor wanted)

Doug Burstedt

Tue, 6 Aug 1996 10:02:57 -0700

Doug McKean

Re: ASS: Cracking of Decoupling Caps

Doug McKean

Wed, 07 Aug 1996 07:25:08 -0400

Re: ASSM: 610B

Doug McKean

Wed, 19 Jun 1996 15:14:16 -0400

ASSY: Glue and Fine Pitch Devices - Thanks

Doug McKean

Wed, 28 Aug 1996 15:23:40 -0400

Re: DES and fab?? Back Pressure

Doug McKean

Wed, 31 Jul 1996 08:17:22 -0400

Doug McKean

Wed, 30 Oct 1996 14:08:08 -0500

Re: DES: Current Through Vias

Doug McKean

Tue, 25 Jun 1996 15:25:02 -0400

Re: DES: schematic conventions

Doug McKean

Sat, 29 Jun 1996 08:11:27 -0400

Re: DES:FAB:ASSY: Breakdown

Doug McKean

Wed, 07 Aug 1996 10:34:10 -0400

Re: Design questions

Doug McKean

Mon, 24 Jun 1996 16:37:01 -0400

FAB: Board Analysis - One More Time

Doug McKean

Fri, 13 Dec 1996 09:52:33 -0500

FAB: Heat Expansion

Doug McKean

Wed, 26 Jun 1996 09:46:58 -0400

FAB: Independent Lab for Board Residue Analysis

Doug McKean

Thu, 12 Dec 1996 11:08:44 -0500

FAB: Solder Mask on Traces Pulling Off

Doug McKean

Thu, 22 Aug 1996 14:24:09 -0400

Re: Galvanic Corrosion

Doug McKean

Tue, 12 Nov 1996 12:17:33 -0500

Doug McKean

Fri, 20 Dec 1996 11:54:29 -0500

Glue and Fine Pitch Devices

Doug McKean

Sat, 21 Dec 1996 16:05:14 -0500

Doug McKean

Mon, 26 Aug 1996 09:34:19 -0400

Heat Expansion

Doug McKean

Wed, 26 Jun 1996 10:01:36 -0400

Re: FW: Re[2]: Humidity Testing

Doug McKean

Fri, 12 Jul 1996 08:05:36 -0400

Re: Internal and external ground planes

Doug McKean

Thu, 24 Oct 1996 09:27:44 -0400

Re: Internet Virus

Doug McKean

Thu, 19 Sep 1996 13:32:33 -0400

Re: Low-emissions PCB design

Doug McKean

Thu, 11 Jul 1996 08:42:43 -0400

On the Lighter Side - I hope you don't mind ...

Doug McKean

Fri, 20 Dec 1996 10:48:41 -0500

PWB and PCB???

Doug McKean

Mon, 21 Oct 1996 11:22:01 -0400

Re: The Ultimate in Flooring

Doug McKean

Wed, 26 Jun 1996 10:16:04 -0400

Transmission Line Software

Doug McKean

Fri, 25 Oct 1996 15:16:21 -0400

DOUG MILLS DIR RESIDENT CME GROUP (714)438-2985

Need some help in locating an Industry standard!?

DOUG MILLS DIR RESIDENT CME GROUP (714)438-2985

Sat, 23 Mar 1996 14:58:12 -1000

Re: GEN: EMAIL

DOUG MILLS DIR RESIDENT CME GROUP (714)438-2985

Tue, 10 Dec 1996 09:51:26 PT

DOUG MILLS DIR RESIDENT CME GROUP (714)438-2985

Fri, 31 May 1996 14:43:08 -1000

Doug Whitnell, MTTC

Re: MeniscusBlockage

Doug Whitnell, MTTC

Tue, 19 Nov 1996 16:19:37 -0800 (PST)

Doug Whitnell

ASSY Moisture Release Rates and Prebake Parameters

Doug Whitnell

Thu, 26 Sep 1996 08:26:39 -0700 (PDT)

ASSY,FAB,DES Electronics Manufacturing Seminar

Doug Whitnell

Tue, 24 Sep 1996 09:58:49 -0700 (PDT)

ASSY,FAB,DES Electronics Manufacturing Seminar

Doug Whitnell

Tue, 24 Sep 1996 09:58:49 -0700 (PDT)

Douglas J. Whitnell

RE:Assy, training

Douglas J. Whitnell

Thu, 23 May 1996 13:08:50 -0700

Re: GEN: Electronic Component Packaging Specs.

Douglas J. Whitnell

Fri, 24 May 1996 08:25:10 -0700

Douglas Sandvick

2 New IPC Documents

Douglas Sandvick

Fri, 27 Dec 1996 10:54:39 -0600 (CST)

Re: adhesives

Douglas Sandvick

Wed, 11 Dec 1996 13:03:12 -0600 (CST)

Re: BackPlane Design

Douglas Sandvick

Wed, 13 Nov 1996 14:54:06 -0600 (CST)

Douglas Sandvick

Wed, 7 Aug 1996 16:58:39 -0500 (CDT)

Re: IPC-6013

Douglas Sandvick

Thu, 12 Dec 1996 08:03:43 -0600 (CST)

RE: IPC-B-36

Douglas Sandvick

Thu, 8 Aug 1996 11:57:21 -0500 (CDT)

It works! (fwd)

Douglas Sandvick

Wed, 11 Dec 1996 13:07:21 -0600 (CST)

Reflow Solder Thermal Profiling IPC Questionaire

Douglas Sandvick

Wed, 18 Dec 1996 15:28:38 -0600 (CST)

Dovenbarger, Eric

Re: Bow and Twist

Dovenbarger, Eric

Thu, 09 May 96 13:32:00 CDT

Doxtator, Gary

..."Battery Substitution"

Doxtator, Gary

Tue, 03 Dec 96 05:55:00 CST

drilbert

entry mat'l

drilbert

Sat, 07 Dec 1996 17:31:51 -0800

Re: Nepcon Workshops 1997

drilbert

Mon, 09 Dec 1996 19:25:46 -0800

Duane Hennekens {PCbld}

Negative Working, Liquid Resists

Duane Hennekens {PCbld}

Thu, 25 Jan 96 15:02:15 CST

Dwight Mattix (Dwight Mattix)

ARRGHH! Re: Silver Ink Screen Print.

Dwight Mattix (Dwight Mattix)

Thu, 14 Nov 1996 16:37:02 -0800 (PST)

ASSY: (Mac?) Gerber Viewing Software

Dwight Mattix (Dwight Mattix)

Wed, 22 May 1996 13:07:53 -0700 (PDT)

re: DES: Blind or Burried Via vs Number of Layers in PWB

Dwight Mattix (Dwight Mattix)

Wed, 21 Aug 1996 07:07:22 -0700 (PDT)

Dwight Mattix (Dwight Mattix)

Fri, 24 May 1996 09:09:08 -0700 (PDT)

Re: Printed Circuit Board Vibration Damping

Dwight Mattix (Dwight Mattix)

Fri, 24 May 1996 09:36:21 -0700 (PDT)

Dwight Mattix (Dwight Mattix)

Wed, 22 May 1996 13:18:36 -0700 (PDT)

E.Janssens@MT0004

FAB: IMAGE ROOM CLEANLINESS

E.Janssens@MT0004

Fri, 11 Oct 1996 03:18:42 EDT

LOHR AND HERRMANN

E.Janssens@MT0004

Thu, 12 Sep 1996 04:33:16 EDT

req info adhesive less flex

E.Janssens@MT0004

Fri, 20 Sep 1996 10:59:14 EDT

Street price PCB

E.Janssens@MT0004

Thu, 10 Oct 1996 11:17:15 EDT

Eastman, Brian @ GSC

ADM: Job opportunity

Eastman, Brian @ GSC

Fri, 25 Oct 96 06:32:00 PDT

Gerber User Group Meeting to be Re-scheduled

Eastman, Brian @ GSC

Fri, 16 Feb 96 19:09:00 PST

Eastman,Brian

Gerber Systems User Group

Eastman,Brian

Thu, 08 Feb 96 10:57:00 PST

Ed Current

RE: DES/FAB: PEMNUT FASTENERS IN FR4 FIBERGLASS

Ed Current

Wed, 10 Jul 1996 15:03:13 -0700

Ed Gavin

Alternate Heat Sink Compounds

Ed Gavin

Mon, 09 Dec 1996 16:18:01 -0500

Alternate Heatsink compound

Ed Gavin

Tue, 10 Dec 1996 13:10:54 -0500

No E-Mail

Ed Gavin

Mon, 11 Nov 1996 08:51:56 -0500

PWB: Wave Soldering Guidelines

Ed Gavin

Fri, 26 Jul 1996 08:51:03 -0400

Ed Hagan, P&EM, 248-5021

Re: C A Picard Exposure Frames

Ed Hagan, P&EM, 248-5021

Wed, 2 Oct 96 14:58:36 EDT

RE: Idium Tin Oxide Coated Pet (Polyester) Film

Ed Hagan, P&EM, 248-5021

Tue, 8 Oct 96 07:10:09 EDT

Ed Hagan, P&EM, 919-248-5021

Re: Bubbles in Conformal Coating

Ed Hagan, P&EM, 919-248-5021

Fri, 8 Nov 96 11:16:46 EST

RE: Dryfilm soldermask

Ed Hagan, P&EM, 919-248-5021

Tue, 15 Oct 96 10:01:40 EDT

Re: unsubcribe

Ed Hagan, P&EM, 919-248-5021

Fri, 8 Nov 96 12:02:52 EST

ED HARKESS

RE: ASSY -Reply

ED HARKESS

Tue, 06 Aug 1996 10:41:22 -0600

ASSY: Short leads in a PWA

ED HARKESS

Wed, 27 Mar 1996 08:19:11 -0600

Ed Santana

re: ADMIN: Sales postings / Advertisements

Ed Santana

Tue, 7 May 96 9:19:13 EDT

re: BGA PPM Question

Ed Santana

Fri, 19 Apr 96 15:00:04 EDT

EDDIE VAN HOREN 014 57 20 08

ASSY: SOIC'S IN WAVESOLDERING Rockwell

EDDIE VAN HOREN 014 57 20 08

Wed, 10 Apr 1996 15:48:27 +0100 (MET)

Edward G. Shea

RE:BGA Bare Board Testing?

Edward G. Shea

Thu, 11 Jan 96 10:23:11 PST

RE: ET Test Pins

Edward G. Shea

Fri, 4 Oct 96 12:50:51 PDT

TechNet Archive

Edward G. Shea

Tue, 19 Nov 1996 15:07:44 -0500

Edward J Popielarski

Fwd: (ASSEM) Wave soldering SOT-23

Edward J Popielarski

Tue, 10 Dec 1996 09:22:53 -0800

Fwd: (no subject)

Edward J Popielarski

Tue, 10 Dec 1996 00:45:24 -0800

Fwd: Assy:looking for production aid

Edward J Popielarski

Tue, 10 Dec 1996 01:11:40 -0800

Fwd: DES/ASSY: 2 pin shunt connector

Edward J Popielarski

Wed, 4 Dec 1996 21:45:12 -0800

Fwd: Dross on CCA

Edward J Popielarski

Wed, 18 Dec 1996 13:55:48 -0800

Fwd: GEN: Acceptable level of indor humidity?

Edward J Popielarski

Wed, 4 Dec 1996 21:35:46 -0800

Fwd: Re: GEN: Doggerel

Edward J Popielarski

Mon, 16 Dec 1996 22:59:37 -0800

Fwd: Internet Address

Edward J Popielarski

Tue, 10 Dec 1996 00:09:02 -0800

Need a batch cleaner

Edward J Popielarski

Tue, 10 Dec 1996 11:21:46 -0800

Fwd: newbie search question

Edward J Popielarski

Mon, 16 Dec 1996 22:43:17 -0800

Fwd: Tented vias???

Edward J Popielarski

Wed, 4 Dec 1996 21:56:53 -0800

Edward J. Valentine

Re: Fab/assy:reference designators

Edward J. Valentine

Thu, 11 Jul 1996 08:30:00 -0700

Silver Plating over Copper

Edward J. Valentine

Wed, 03 Jul 1996 08:33:10 -0700

[Fwd: Silver Plating over Copper]

Edward J. Valentine

Wed, 03 Jul 1996 08:31:42 -0700

Edwards, Ted A (AZ75)

RE: Ag or Pd alternative to HASL inquiry

Edwards, Ted A (AZ75)

20 Sep 1996 17:48:32 -0500

RE: ASM: SMT pads with vias.

Edwards, Ted A (AZ75)

10 Jun 1996 15:48:23 -0500

RE: ASSY: Aramid material and baking

Edwards, Ted A (AZ75)

20 Jun 1996 17:36:37 -0500

Re: Assy: conformal coating

Edwards, Ted A (AZ75)

24 Sep 1996 13:58:39 -0500

ASSY: Teflon Board Repair

Edwards, Ted A (AZ75)

08 May 1996 12:21:54 -0500

RE: ASSY: VACUUM BAGS

Edwards, Ted A (AZ75)

02 Dec 1996 07:49:02 -0600

RE: Copper Plating

Edwards, Ted A (AZ75)

04 Jun 1996 18:41:05 -0500

RE: DES: Rigid Flex

Edwards, Ted A (AZ75)

09 Aug 1996 12:24:11 -0500

Re: Dry Box Source?

Edwards, Ted A (AZ75)

11 Nov 1996 17:38:30 -0600

RE: Entech

Edwards, Ted A (AZ75)

06 Aug 1996 15:51:44 -0500

Re:FAB

Edwards, Ted A (AZ75)

18 Oct 1996 12:05:37 -0500

FAB RE: Gelatinous residue on High Tg Material

Edwards, Ted A (AZ75)

25 Jul 1996 09:44:35 -0500

FAB Trade OFFs

Edwards, Ted A (AZ75)

25 Apr 1996 09:08:17 -0500

RE: FAB: Arlon

Edwards, Ted A (AZ75)

13 Nov 1996 14:30:47 -0600

FAB: BT Resin

Edwards, Ted A (AZ75)

11 Jun 1996 11:14:54 -0500

FAB: BT Resin

Edwards, Ted A (AZ75)

11 Jun 1996 11:14:54 -0500

FAB: Edge Plating

Edwards, Ted A (AZ75)

16 May 1996 12:05:11 -0500

RE: FAB: Electroless Nickel - Immersion Gold

Edwards, Ted A (AZ75)

12 Jul 1996 09:58:06 -0500

Re: FAB: Formula for Etching

Edwards, Ted A (AZ75)

24 Sep 1996 10:42:26 -0500

RE: FAB: Green rust

Edwards, Ted A (AZ75)

20 May 1996 17:57:02 -0500

RE: FAB: LPISM over Reflow Sn/Pb

Edwards, Ted A (AZ75)

13 Jun 1996 10:56:50 -0500

RE: Fab: Re:Negative etchback

Edwards, Ted A (AZ75)

23 May 1996 13:47:18 -0500

RE: FAB: Silk-screen ink on surface mount pads

Edwards, Ted A (AZ75)

31 May 1996 11:04:56 -0500

RE: Fab: Vacuum Desiccation Chambers

Edwards, Ted A (AZ75)

27 Nov 1996 10:13:49 -0600

RE: FAB:Cupric Chloride Etchant

Edwards, Ted A (AZ75)

13 Aug 1996 17:40:46 -0500

FAB:Post-Etch-Punch and Optical Post Lamination (Optimizer)

Edwards, Ted A (AZ75)

09 Apr 1996 17:31:17 -0500