Subject: | |
From: | |
Date: | Wed, 06 Nov 96 11:12:16 EST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Why not electroplate the tin on one side, & then mask off & do the
nickel gold electroless/immersion? As was already said, though,
you'll have to watch what happens with the vias.
Matt Byrne
______________________________ Reply Separator _________________________________
Subject: FAB: Electroless Tin
Author: [log in to unmask] at SMTPLINK-HADCO
Date: 11/5/96 05:00 PM
I have a customer who wants Tin on one side of his circuit
and Ni-Gold on the other. The only way I can figure
out to do this is to use an electroless Tin. Does anyone
know of a vendor who will do electroless tin plating?
Rich Orr
Lucent Technologies
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|