To Jeffery,

We are currently using MV2C and MPA III too.

The answers as followed:-

1) What size and shape fiducials have you found to work most efficiently
with your machines? 

We realise circle and square fiducials work pretty OK..
Diameter of at least 1mm to 2.5 mm works well.


2) What type of solder finish is used on fiducials/boards, i.e.,
HASL,organic, bare Cu, none??

I prefer bare Cu. I hate HASL, it is somtimes, too many uneveness.

I have not try organic, if you try it before, I would like to listen to
your opinion.


+====================================+
Poh Kong Hui
Techgate 
Email: [log in to unmask]
=-=-=-=-=-= -=-=-=-.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************