LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

1996

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home
	TECHNET 1996

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:	Use Monospaced Font Show Text Part by Default Show All Mail Headers
Message:	[<< First] [< Prev] [Next >] [Last >>]
Topic:	[<< First] [< Prev] [Next >] [Last >>]
Author:	[<< First] [< Prev] [Next >] [Last >>]

Subject:	Re[2]: Glue
From:	"Paul Stolar" <[log in to unmask]>
Date:	Thu, 10 Oct 96 11:16:35 CDT
Content-Type:	text/plain
Parts/Attachments:	text/plain (61 lines)

     The Gemini does use a positive displacement pump. We are also using 
     3609.

______________________________ Reply Separator _________________________________
Subject: Re: Glue
Author:  Pat McGuine <[log in to unmask]> at Internet
Date:    10/10/96 11:16 AM

I'm not familiar w/ how Gemini brings the needle down to get a consistent 
z-height above the board.  It has been my experience however that it is 
extraordinarily important that this is consistent.  I have an older Camalot, 
we had to purchase a z-axis compensator for it from Camalot.  Also, does the 
Gemini use a positive displacement pump?  I have also found that this helped 
a lot.  We just switched from Loctite 348 to Loctite 3609.  3609 is much 
better for us.

At 09:24 10/10/96 CDT, Paul Stolar wrote:
>     I am using a Camalot Gemini and I wonder if anyone out there has 
>     experimented with how to reduce variation. I would prefer that Camalot 
>     and Loctite not respond to this, I would like to hear from people in 
>     the field. If you prefer, write to me off line. I will compile the 
>     inputs w/o names and repost.
>     
>     Thanks,
>     
>     Paul Stolar
>     [log in to unmask]
>
>*************************************************************************** 
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
>*************************************************************************** 
>* To unsubscribe from this list at any time, send a message to:           * 
>* [log in to unmask] with <subject: unsubscribe> and no text.        * 
>*************************************************************************** 
>
>
>

-Pat-

-------------
Patrick McGuine
Nicolet Instrument
[log in to unmask]
(608) 276-6334

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************

ATOM RSS1 RSS2

LISTSERV.IPC.ORG