TECHNET Archives

1996

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re[2]: ASSY: MELF's
From:
"ddhillma" <[log in to unmask]>
Date:
Fri, 06 Dec 96 08:46:40 cst
Content-Type:
text/plain
Parts/Attachments:
text/plain (53 lines) 
     Hi Stew -
     
     Are your MELF components glass bodied? Are you doing something 
     "special" in the process to avoid thermal shock damage. 
     
     
     Dave Hillman
     Rockwell Collins
     [log in to unmask]


______________________________ Reply Separator _________________________________
Subject: Re: ASSY: MELF's
Author:  [log in to unmask] at ccmgw1
Date:    12/6/96 8:43 AM


     
  We've been wave-soldering MELF and SOD80/SOD87 pkgs in large qty's
for about 5 years now.  We've had little problem with alignment, using 
square pads.  The biggest problem we've had is bridging - mostly due 
to board density being much higher than ideal.  (By large qty, I mean 
over 1 million units/yr, with about 8 diodes per unit)
     
Stew Benedict, CAD Specialist, GE Lighting, Cleveland OH 
[log in to unmask]
     
     
     
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To unsubscribe from this list at any time, send a message to:           * 
* [log in to unmask] with <subject: unsubscribe> and no text.        * 
*************************************************************************** 
* If you are having a problem with the IPC TechNet forum please contact   * 
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      * 
***************************************************************************
     

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2