>WHAT BOARD MATERIALS ARE BEST SUITED FOR HOT AIR LEVELLING WITH RESPECT
>TO MEASLING?
>
>HOW DOES ONE PREVENT MEASLING?
>
>DO SOME MATERIALS NOT WITHSTAND THE HEAT, AND IF SO WHICH ONES?

Higher Tg resins (above 150); lower glass content & thinner glass fibers will
help; as will a good prebake.
Larger holes densely packed and a 7628 glass construction are about the most
likely to measle at the bare board level. Might also want to double check the
cure & drilling on a problem board.


Tom Waznis

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************