We are currently having our board assembly house use a quick drying glue 
to secure a 30AWG wire to the pcb for a modification.  We are finding 
the glue can cause electrical problems (not all the time) if it is 
in the leads of FINE PITCH surface mount devices.  This is confirmed 
when the glue is removed.  There is the telltale white residue on the 
glue indicating the glue is applied first and the accelerater applied 
second.  Something I've done myself.  It's my understanding that the 
accelerator should applied first and the glue second.  There are no 
controlled impedence issues and comparativley low frequency of 
1 to 32 MHz digital signals.

1. Has anyone had electrical problems with glue in the leads of 
   fine pitch devices? 

2. Can the glue be conductive for at least fine pitch devices? 

I've seen this glue used tons of times without this effect. 
Thanks in advance. 

Doug
-- 

*******************************************************
Doug McKean
[log in to unmask]
-------------------------------------------------------
The comments and opinions stated herein are mine alone,
and do not reflect those of my employer.
-------------------------------------------------------
*******************************************************

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************