Delivery Failure Report

                               Your document:
                             Re: PWB and PCB???
                         could not be delivered to:
                    TechNet @ ipc.org; technet @ ipc.org
                                  because:
      There was no response from an authorized Domain Name Server when
      attempting to map the host or domain name to an Internet address.
                                Routing path:
                         Notes1/IO-US, Notes2/IO-US

  You can resend the undeliverable document to the recipients listed above
  by choosing the Send command on the Mail menu.  Unless you receive other
  Delivery Failure Reports, the document was successfully delivered to the
  other recipients, if any.

                  (strikethrough: ________________________)


  To:       TechNet @ ipc.org
  cc:       dmckean @ paragon-networks.com, technet @ ipc.org
  From:     Charles Barker/IO-US
  Date:     10-21-96 05:35:12 PM
  Subject:  Re: PWB and PCB???

  In an earlier life, we used PWB and PWA. The former being the blank board
  and the latter the assembly.

  To:       dmckean @ paragon-networks.com
  cc:       technet @ ipc.org (bcc: Charles Barker/IO-US)
  From:     TechNet @ ipc.org
  Date:     10/21/96 11:24:11 AM MST
  Subject:  Re: PWB and PCB???





  At the IPC, we try to use PWB and PCB exactly as you have assumed.  But,
  judging from the phone calls I get, the industry has not "standardized"
  on these terms.

  Kim Sterling
  Director, Market Research
  IPC
  Phone 847/509-9700 ext 305
  FAX 847/509-9798
  E-Mail [log in to unmask]


  On Mon, 21 Oct 1996, Doug McKean wrote:

  > Is there a difference between a
  > PWB - Printed Wiring board and
  > PCB - Printed Circuit Board
  > in the industry?
  >
  > Is it safe to assume (uh-oh) the PWB is the bare board and
  > the PCB is the PCB w/components, i.e. a PCB assembly?
  >
  > Does anyone out there make a strict division between the two this way?
  >
  > *******************************************************
  > Doug McKean
  > [log in to unmask]
  > -------------------------------------------------------
  > The comments and opinions stated herein are mine alone,
  > and do not reflect those of my employer.
  > -------------------------------------------------------
  > *******************************************************
  >
  >
  *************************************************************************
  ** > * TechNet mail list is provided as a service by IPC using SmartList
  v3.05 * >
  *************************************************************************
  **
  > * To unsubscribe from this list at any time, send a message to:           *
  > * [log in to unmask] with <subject: unsubscribe> and no text.        *
  > ***************************************************************************
  >
  >

  ***************************************************************************
  * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
  ***************************************************************************
  * To unsubscribe from this list at any time, send a message to:           *
  * [log in to unmask] with <subject: unsubscribe> and no text.        *
  ***************************************************************************