Hi Paresh....it depends how much u want to spend on a system like this,
there are a lot of them out there....according do ur needs i would say 
try out 

1> The theta group...seems to be a good machine....can do a bunch of stuff
they have three models Vista, Verifier and Optima....all these m/c have
the capability of real time SPC 
contact : ken Gribble
1 800 877 4874

2> The other company would be CR Technologies checks and verifies
Component presence/Orientation/Correct part and a bunch of other stuff..
Ph 714 448 0443
Hope this helps...i don't work for them and the standard disclaimer
applies....

mohit gujral

______________________________ Reply Separator _________________________________
Subject: Vision System
Author:  [log in to unmask] at uucpmail
Date:    10/30/96 8:53 AM

Good morning,

We have a concern regarding potential of  higher DPU at auto insertion 
when verifier is non-functional and operator loads one or more tubes of 
IC's or reels of components in the feeder. There is also a second 
related issue.  Even when the verifier is working well, operator is 
required to do a TQC on the PCB's as final check at that operation. 
This TQC is very time consuming which in turns reduces productivity.

I need your help in gaining knowledge and gathering information on any 
available vision system that would check for correct component in 
place.  An efficient system should free us from worry when verifier is 
non-functional and increases productivity.

Thanks for your help,
Paresh Patel
Oneac Corp.
847-816-6000 x-704.

*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To unsubscribe from this list at any time, send a message to:           * 
* [log in to unmask] with <subject: unsubscribe> and no text.        * 
***************************************************************************


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************