Technet people:
     
     We are also in the process of switching to OSP and we are trying to 
     set up reliability testing.  What are other assemblers doing to insure 
     product solderability, cleanliness, solder joint integrity, coating
     thickness,etc.  Any help would be appreciated.
     
     Ron Yanuszewski
     Cabletron Systems


______________________________ Reply Separator _________________________________
Subject: Entec 106
Author:  [log in to unmask] at !INTERNET
Date:    11/4/96 12:54 PM


     Jeffery Harry,  would you please expand on the "major problems" you 
     have seen by running Entek 106 in a dip mode.
     
     Peter Blokhuis
     PC World
     [log in to unmask]
     
     ----------------------------------------------------------------------
     
     
     
     If you use Entec 106, make sure that the PCB supplier has an in-line 
     process.  Dip tanks will cause major problems.  Also the PCBS need to 
     be thoroughly dried before packaging.  If not, you will have 
     solderability problems.
     
     Jeffrey_Harry @ 3mail.3com.com@ ugate 
     
     ----- Previous Message 
     ---------------------------------------------------- 
     
     
     
     To: Technet  @ ipc.org @ UGATE
     cc:  
     From: EHolton @ vines.etn.com @ UGATE    Date: Thursday  October 31, 
     1996 02:40 PM Subject: OSP Coating
     ---------------------------------------------------------------------- 
     ---------- 
     ---------------------------------------------------------------------- 
     ---------- ------------------------------
     Fellow technetters:
     
     My company is beginning its research into the wonderful world of 
     organic solderability preservative coatings.  Our goal being to 
     implement this on the circuit boards in the near future.  I am looking 
     for any and all information that anyone may have....
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To unsubscribe from this list at any time, send a message to:           * 
* [log in to unmask] with <subject: unsubscribe> and no text.        * 
***************************************************************************
     
     

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************