TECHNET Archives

1996

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: FAB: Lamination
From:
[log in to unmask]
Date:
Mon, 16 Sep 96 07:54:22 EST
Content-Type:
text/plain
Parts/Attachments:
text/plain (43 lines) 
     It doesn't work that way. The PCB square area receives the pressure
     direct. (Like pounds per square inch) You can put close to the same
     panel sizes in the press. (Like 14 X 18 in one opening and 16 X 18
     in another) Check with your laminate supplier. They should have a
     recommended pressure range for lamination. Work within that range to
     achieve the pressures. Like 18 X 24 at 200 PSI and 16 X 18 at 300 PSI
     in the same press. An important note to mention is that if you do
     controlled impedance work, your dielectric thickness' will be all over
     the place. (variance) Also, you will see dimensional stability 
     differences. (growth or shrinkage) Be sure you look downstream at
     any potential changes you may create.
     
     Groovy
______________________________ Reply Separator _________________________________
Subject: FAB: Lamination
Author:  [log in to unmask] at SMTPLINK-HADCO
Date:    9/16/96 8:08 AM


Does any PCB manufacturer has an experiance with lamination proccess of
mixing different board sizes into different openings of the press in the
same cycle (using same size of press plates and seperators)?

Shabtay Shalev
Engineering  

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************

ATOM RSS1 RSS2