IPC-A-610B section 3.2.4 "Component Installation - Vertical - Radial Leaded"
states that 15 degrees inclination (tilt) from vertical is acceptable for classes
1, 2, and 3.  I hope this answers your question.

Ellsworth D. Berkowitz, PE
Principal Engineer
AT&T Paradyne
"The opinions expressed above are those of Ellsworth D. Berkowitz, PE and may or
may not reflect the opinion of AT&T Paradyne."
Received: from pdn.paradyne.com by pdnis.paradyne.com (4.1/SMI-4.1)
	id AA21952; Thu, 9 May 96 13:46:45 EDT
Received: by pdn.paradyne.com (Smail3.1.29.1 #2)
	id m0uHZnY-0000jgC; Thu, 9 May 96 13:46 EDT
>Received: from simon.ipc.org by relay7.UU.NET with SMTP 
	(peer crosschecked as: IPC.ORG [168.113.24.64])
	id QQaozd29760; Thu, 9 May 1996 13:21:01 -0400 (EDT)
Received: from simon.ipc.org by relay7.UU.NET with SMTP 
	(peer crosschecked as: IPC.ORG [168.113.24.64])
	id QQaozd29760; Thu, 9 May 1996 13:21:01 -0400 (EDT)
Received: from ipc.org by simon.ipc.org via SMTP (940816.SGI.8.6.9/940406.SGI)
	 id MAA15007; Thu, 9 May 1996 12:08:55 -0700
Received: by ipc.org (Smail3.1.28.1 #2)
	id m0uHWEX-0000FIC; Thu, 9 May 96 08:58 CDT
Resent-Date: Thu, 9 May 1996 12:08:55 -0700
Resent-Sender: [log in to unmask]
Old-Return-Path: <[log in to unmask]>
Date: Thu, 9 May 1996 09:04:23 -0500
From: [log in to unmask] (John Laur)
Message-Id: <[log in to unmask]>
To: [log in to unmask]
Subject: ASSY: Vertical angle
X-Sun-Charset: US-ASCII
Resent-Message-Id: <"u22z33.0.cB8.tdVan"@ipc>
Resent-From: [log in to unmask]
X-Mailing-List: <[log in to unmask]> archive/latest/3980
X-Loop: [log in to unmask]
Precedence: list
Resent-Sender: [log in to unmask]
Content-Type: text
Content-Length: 366

All,

Does IPC have a number on allowable vertical
angle for radial components?
I want to keep some LEDS straight up.

Thanks,

---------------------------
John Laur
Rockwell Automation
Allen-Bradley Co Inc.                 
1201 South Second Street
Milwaukee, WI 53204
+1 414 382 2162 (fax)
+1 414 382 2393 (phone)

[log in to unmask]
---------------------------