We just installed the Resys system into our facility. For the most 
     part it is working well. I had a few problems with it blowing fuses. I 
     also noticed that the heating element gets hotter than the set point 
     when no water is flowing through it. I have had to turn the heater off 
     every time I shut down the machine. Hope this helps good luck.
     
     Steven E. Luther
     Engineering Manager
     Zycon Corporation
     Backplane Division
     408-556-8045
     


______________________________ Reply Separator _________________________________
Subject: Re: small closed loop aqueous recovery system
Author:  [log in to unmask] at corp
Date:    10/8/96 1:39 PM


--0__=hN6OFceGcsDgKpkrm6i5P3ypuslJgmik41y7frdtVItB6WBTNYNoMDnz 
Content-type: text/plain; charset=us-ascii
     
     
     
  We are moving into a new facility and have just installed a new in-line 
  cleaner along with the Resys CLS system there. The PWA line will be 
  moving to the new building this weekend.  If everything goes well, it 
  should all be on-line next week.  So far, the Resys looks ok. If I can 
  give you any additional info, you may contact me at:
     
  Charles Barker, Manufacturing Engineer 
  Input/Output, Inc.
  12200 Parc Crest Drive
  Stafford, Texas 77477-2409
  281/552-3328
  [log in to unmask]
     
  To:       technet @ ipc.org
  cc:        (bcc: Charles Barker/IO-US) 
  From:     TechNet @ ipc.org
  Date:     10/08/96 11:45:11 AM MST
  Subject:  small closed loop aqueous recovery system
     
     
     
--0__=hN6OFceGcsDgKpkrm6i5P3ypuslJgmik41y7frdtVItB6WBTNYNoMDnz
     
  Does anyone have any experience with Resys's aqueous recovery system?  I 
  am looking at adding water recovery capability to our in-line cleaners 
  and am wondering what kinds of issues/problems other companies have 
  faced.
     
     
     
  *************************************************************************** 
  * TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
  *************************************************************************** 
  * To unsubscribe from this list at any time, send a message to:           * 
  * [log in to unmask] with <subject: unsubscribe> and no text.        * 
  ***************************************************************************
     
     
--0__=hN6OFceGcsDgKpkrm6i5P3ypuslJgmik41y7frdtVItB6WBTNYNoMDnz--
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To unsubscribe from this list at any time, send a message to:           * 
* [log in to unmask] with <subject: unsubscribe> and no text.        * 
***************************************************************************
     

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************