> Mike Lacey said:
> 
> >I'm looking for any information on size of standard pc cards. Particularly
> >the size and dimensions of the fingers. Any help would be greatly appreciated.
> >
> >Mike Lacey
> >[log in to unmask]
> >(201)930-9888 x5345
> 
> Do you mean ISA, EISA, PCI or whut? They have some similarities, but the
> fingers differ.
> 
> We have some of the specs here, but is there any such thing as a "standard
> PC card"? I do know that the various EISA cards you will find differ a good
> deal in length and height. They have a half card and full card. PCI boards
> have 5V, 3.3V, and universal versions, either 32 bit or 64 with different
> keying slot locations and pitch on the contacts.
> 
> To assist you, one needs more specific info. If you have a certain type in
> mind I might be able to dig up a drawing around here and fax it to you. And
> that would be limited by my frame of mind and just how hard it is to dig it
> up.
> 
> One contact is:
> 
> PCI Special Interest Group
> M/S HF3-15A
> 5200 N.E. Elam Young Parkway
> Hillsboro, Oregon 97124-6497
> 503-696-2000
> 
> Ask about the PCI Local Bus Specification.
> 
> The PCI card will probably be the most common in the future, but there are
> lots of EISA cards out today. ISA is also common for older PC's.
> 
> And then you have your Microchannel architecture. It never ends.
> 
> Another good reason to run a Mac!
> 
> 
> Jerry Cupples
> Interphase Corporation
> Dallas, TX
> http://www.iphase.com
> 
> 
> 


You can call PCI at 1-800-433-5177
or fax 1-503-234-6762 for fax orders.

The PCI spec is around $25.00 + S&H

---------------------------
John Laur
Rockwell Automation
Allen-Bradley Co Inc.                 
1201 South Second Street
Milwaukee, WI 53204
+1 414 382 2162 (fax)
+1 414 382 2393 (phone)

[log in to unmask]
---------------------------