Jose,
One important book on EMC that seems to be missing is
"Noise Reduction Techniques in Electronic Systems"
Henry W. Ott, John Wiley & Sons, New York, 1976
Doug McKean
______________________________ Reply Separator _________________________________
Subject: DES: DFM References
Author: [log in to unmask] at internet-mail
Date: 5/9/96 2:00 AM
----------
X-Sun-Data-Type: text
X-Sun-Data-Description: text
X-Sun-Data-Name: text
X-Sun-Charset: us-ascii
X-Sun-Content-Lines: 55
----- Begin Included Message -----
>From [log in to unmask] Wed May 8 21:51:14 1996
Resent-Date: Wed, 8 May 1996 20:49:17 -0700
Resent-Sender: [log in to unmask]
Old-Return-Path: <[log in to unmask]>
Date: Wed, 8 May 1996 21:54:46 -0400
From: [log in to unmask] (Jose Korneluk)
To: [log in to unmask], [log in to unmask]
Subject: DES: DFM References
Content-Type: X-sun-attachment
Resent-Message-Id: <"X8AzH.0.hzK.WrKan"@ipc>
Resent-From: [log in to unmask]
X-Mailing-List: <[log in to unmask]> archive/latest/1698
X-Loop: [log in to unmask]
Resent-Sender: [log in to unmask]
Content-Length: 10223
All concerned:
Included please find a list of books and magazine article references dealing
with PCB Design and DFM.
I am posting this list at the request of those individuals who previously
helped out and responded to my original request(s) for information.
A small disclaimer is in order though. This list is coarsely broken down by
subject (more or less), it is not in alphabetical order and in some places
does not adhere to any particular quoting or style manual (I do not own any
fancy bibliographical software like EndNotes), may contain some repetitions,
some of the articles and books are dated, and it is by no means extensive nor
complete. Also, because the information has been culled from many different
sources from cyberspace, the contributors are not acknowledged. I have also
resisted numbering the entries for ease of rearranging later.
If you have additions, changes, deletions, or comments, please e-mail me. If
enough interest is generated, this list can grow into a monthly FAQ-type of
posting. All contributions, contributors, and sources will be duly
acknowledged.
-- Jose'
+-----------------------------------------------------------------------------+
Jose' E. Korneluk
Florida Atlantic University
[log in to unmask] / [log in to unmask]
+-----------------------------------------------------------------------------+
"Sentido comun es el MENOS COMUN de todos los sentidos"
"Common sense is the LEAST COMMON of all the senses" ... Spanish proverb
+-----------------------------------------------------------------------------+
----- End Included Message -----
----------
X-Sun-Data-Type: default
X-Sun-Data-Name: dfm.references.txt
X-Sun-Content-Lines: 279
X-Sun-Content-Length: 8287
X-Sun-Charset: us-ascii
Manufacturing (DFM)
-------------------
Manufacturing Processes, 8th ed.
B.H.Amstead, Phillip F. Ostwald, Myron L. Begeman
John Wiley & Sons, 1987, ISBN 0-471-84236-2
Design for Manufacturability: A Systems Approach to Concurrent Engineering
and Ergonomics
M.Helander and M.Nagamachi, eds.
Taylor & Francis, 1992, ISBN 0-7484-0009-5
Anzivino, Rich, The DFM Design Philosophy, Printed Circuit Design, December
1994, pp. 14-18.
Webb, Scott E., Implementing DFM, Printed Circuit Design, December 1994,
pp. 10-13.
Potechin, Jamey, Integrating DFM, Printed Circuit Design, November 1993,
pp. 22-26.
Blankenhorn, James C., A Rose by Any Other Name Or, What is Design for
Manufacturability?, Printed Circuit Design, August 1993, pp. 15-17.
LeBrun, Jim, Design for Manufacturing, EDN Products Edition, November 17, 1995.
Mraz, Stephen J., Curing Design Blues, Machine Design, November 7, 1994,
pp. 69-72.
Pallanck, R., Sandberg, E., et. al, How to Make Concurrent Engineering Work,
Part 9: Managing the Work Flow, Machine Design.
Baumgartner, Dan, Quick-Turn Design and DFM, Printed Circuit Fabrication,
Vol. 19, No. 3, March 1996.
Jodoin, Claude J., Good Design Means Good Manufacturing, Printed Circuit
Design, August 1994, pp. 34-35.
Jodoin, Claude J., Designer's Viewpoint, Printed Circuit Design, July 1994,
pp. 36-37.
Jodoin, Claude J., Designer's Viewpoint, Printed Circuit Design, March 1995,
pp. 58-59.
Jodoin, Claude J., Designer's Viewpoint, Printed Circuit Design, November 1993,
pp. 40-41.
Glover, Rita, PCB Leapfrogs Into System-Level Design, Electronic Design,
April 1st, 1996, pp. 83-84.
Dolberg, Schmil, Tomorrow's Tools for PCB Preproduction, Printed Circuit
Fabrication, May 1995.
Silva, Joseph, High-Performance Design, Printed Circuit Design, March 1995.
Gentry, Teresa, Excellence in PCB Design, Printed Circuit Design, Vol. 10,
No. 11, November 1993, pp. 16-21.
Kovarsky, Moshik, Tools of the Trade, Printed Circuit Fabrication, Vol. 19,
No. 3, March 1996.
Neural-Net Autorouter Analyzes Layouts, Adapts Routing Costs, Personal
Engineering, May 1995, pp. 21-22.
Lindgren, Russ, Design-Rule Checks Help Users Create Complex Layouts, Personal
Engineering, May 1995, pp. 24-28.
Potechin, Jamey, The DRC Lie, Printed Circuit Design, August 1994, pp. 18-21.
Gomez, Dick, Design Reuse Accelerates Board Creation, Electronic Design,
July 25, 1992, pp. 77-88.
Design for Testability (DFT)
----------------------------
Tolhurst, Bill, Think Testing During Design, Printed Circuit Design, April
1995, pp. 34-35.
Donlin, Mike, Adopting New DFT Tools Still Calls for Caution, Computer Design,
April 1995, pp. 47-54.
Ambler, T., Bennetts, R.G.B., Bleeker, H., and O'Donnell, G., The Economics of
Design for Test, 3-part series, EE-Evaluation Engineering, September, October,
November 1994.
Hurt, Lynn, DFM for Test and the Customer, Printed Circuit Fabrication,
Vol. 19, No. 3, March 1996.
PCB References
--------------
The Design & Drafting of Printed Circuits, 2nd. ed.
Darryl Lindsey, McGraw-Hill, 1982, ISBN 0-07-037844-4
Bare Board PWB Design Manual
Norman S. Einarson
1995, Printed Circuit Technology
P.O.Box 334, Burlington, MA 01803
(617) 272-0938
PCB References - SMT
--------------------
Handbook of Surface Mount Technology
Stephen W. Hinch, Longman Scientific & Technical copublished in the USA with
John Wiley & Sons, 1988,
ISBN 0-470-21094X (USA only), 0-582-00517-5
Flexible Circuits
-----------------
Handbook of Flexible Circuits
Ken Gilleo, ed., Van Nostrand Reinhold, 1992, ISBN 0-442-00168-1.
PCB Construction / Materials
----------------------------
Brown, Hal, Material Trends, Printed Circuit Design, Special Supplement,
February 1995.
Matrix of Laminate Suppliers, Printed Circuit Design, Special Supplement,
February 1995.
Sober, Doug, Selecting Core Constructions, Printed Circuit Design, Special
Supplement, February 1995.
DeSantis, John A., An Overview of PCB Constructions, Printed Circuit Design,
April 1993, pp. 48-53.
Davis, Ben, A Tour Through the Board Manufacturing Process, Printed Circuit
Design, August 1993, pp. 11-14.
Design for the Environment (DFE) / Electromagnetic Compliance (EMC)
-------------------------------------------------------------------
Seltzer, G.S., Ahy, R., and Razmi, M., Electromagnetic Theory Imposes
Constraints on PC-Board Design, EDN, July 12, 1994, pp. 93-98.
Silvestro, J., Irwin, C., and Cendes, Z., Computing Radiated Emissions,
Printed Circuit Design, January 1995, pp. 14-18.
Wexler, Al, Simulation for EMC Compliance, Printed Circuit Design, January
1995, pp. 25-28.
Ryan, K., and Cannon, M., Designing to Meet EMC Standards, Printed Circuit
Design, January 1995, pp. 20-23.
Coupling of External Electromagnetic Fields to Transmission Lines
A.A. Smith, Jr. John Wiley & Sons, 1977.
Coupling to Shielded Cables
E.F. Vance, John Wiley & Sons, 1978.
Decoupling and Layout of Digital Printed Circuits
K.R. Keenan, The Keenan Corp., 1985.
Digital Design for Interference Specifications
R.K. Keenan, The Keenan Corporation, 1983.
Electromagnetic Compatibility
J.J. Goedbloed, Prentice Hall, 1992.
Electromagnetic Compatibility Design Guide
E.R. Freeman and M. Sachs, Artech House, 1982.
Electromagnetic Compatibility Handbook
N. Violette, D.R.J. White, and M. Violette, Van Nostrand Reinhold, NY 1987.
Electromagnetic Compatibility in Medical Equipment
William D. Kimmel and Daryl D. Gerke, (jointly published by) Interpharm Press
and IEEE Press, 1996.
Electromagnetic Compatibility for Product Designers
Tim Williams, Butterworth Heinemann Ltd. ( ISBN: 0 7506 1264 9 )
Electromagnetic Interference Reduction in Electronic Systems
Jeffrey P. Mills, Prentice Hall, 1993.
Electrostatic Discharge and Electronic Equipment: A Practical Guide for
Designing to Prevent ESD Problems
Warren Boxleitner, IEEE Press, 1989.
Electronic System Design: Interference and Noise Control Techniques
J.R. Barnes, Prentice-Hall, 1987.
Electrostatic Discharge: Understand, Stimulate, and Fix ESD Problems
Interference Control Technologies, 1986.
EMC: Electromagnetic Theory to Practical Design
P.A. Chatterton M.M. Houlden, John Willey & Sons, 1991.
Grounding and Shielding in Facilities
R. Morrison and W.H. Lewis, John Wiley and Sons, 1990.
Grounding and Shielding Techniques in Instrumentation
R. Morrison, Third Edition, John Wiley and Sons, 1986.
High Frequency Measurements and Noise in Electronic Circuits
Douglas C. Smith, Van Nostrand Reinhold, 1993
High-Speed Digital Design: A Handbook of Black Magic
Howard W. Johnson and Martin Graham, Prentice-Hall, 1993.
Introduction to Electromagnetic Compatibility
C.R. Paul, John Wiley Interscience, NY, 1992.
Lightning
M.A. Uman, Dover Publications, 1984.
Lightning and Lightning Protection
W.C. Hart and E.W. Malone, Don White Consultants, 1985.
Lightning Protection
Chemical Publishing Co., R.H. Golde, 1973.
Modern Ferrite Technology
Alex Goldman, Van Nostrand Reinhold, 1990.
Noise Reduction Techniques in Electronic Systems, second edition
H.W. Ott, John Wiley Interscience, NY, 1988.
Power Line Filter Design for Switched-Mode Power Supplies
M.J. Nave, Van Nostrand Reinhold, 1991.
Principles and Techniques of Electromagnetic Compatibility
Christos Christopoulos, CRC Press, 1995
Principles of Electromagnetic Compatibility, third edition
B. Keiser, Artech House, 1987.
Printed Circuit Board Design Techniques for EMC Compliance
Mark Montrose, IEEE Press, 1995.
Shipboard Electromagnetics
Preston E. Law, Jr., Artech House, 1987.
Maliniak, Lisa, Expert System Ensures EMC-Rules Compliance, Electronic Design,
June 10th, 1993, pp. 60-63.
Maliniak, Lisa, 3D System Modeler Encompasses EMC Analysis, Electronic Design,
June 10th, 1993, pp. 64-67.
Cable Shielding for Electromagnetic Compatibility
Anatoly Tsaliovich, Van Nostrand Reinhold, 1995.
Capacitance, Inductance and Crosstalk Analysis
Charles S. Walker, Artech House, 1990.
Controlling Conducted Emissions by Design
J.C. Fluke, Van Nostrand Reinhold, 1991.
Controlling Radiated Emissions by Design
Michel Mardiguian, Van Nostrand Reinhold, 1992.
Standards - ISO 9000
--------------------
Standards - ISO 14000
---------------------
Standards - IPC
---------------
Standards - GMP
---------------
|
