Subject: | |
From: | |
Date: | Thu, 05 Dec 96 13:29:04 PST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We use the first drill file to locate tooling holes in 1/2 inch
phenolic material. We pin the panels to these tooling.
______________________________ Reply Separator _________________________________
Subject: Secondary Drilling
Author: [log in to unmask] at corp
Date: 12/5/96 12:03 PM
Can anyone give me some clues as to a simple approach to repinning
panels for secondary drill. How do you reposition panels on an nc
drilling machine and aling to holes already drilled. This seems to be a
major problem where I work.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|