We use the first drill file to locate tooling holes in 1/2 inch phenolic material. We pin the panels to these tooling. ______________________________ Reply Separator _________________________________ Subject: Secondary Drilling Author: [log in to unmask] at corp Date: 12/5/96 12:03 PM Can anyone give me some clues as to a simple approach to repinning panels for secondary drill. How do you reposition panels on an nc drilling machine and aling to holes already drilled. This seems to be a major problem where I work. *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * *************************************************************************** *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************