Subject: | |
From: | |
Date: | Fri, 13 Dec 96 13:23:06 PST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
One possible source:
Dennis Johnson at ONANON. 408-262-8990
______________________________ Reply Separator _________________________________
Subject: RE: FAB - Small Hole Drilling
Author: [log in to unmask] at corp
Date: 12/13/96 11:32 AM
Does anyone know of a company that provides stand alone small
hole drilling services?
We need to have .008" diameter holes drilled on .125" thick 8-layer
MLBs, with .016" diameter plane clearances and .004" wide spacing
between traces and drilled holes. The pattern is that of a microBGA
device with a .5 mm pitch and 176 holes. Internally, each hole will
either connect directly to a plane or to a trace pad.
Material is either FR-4 or polyimide. All copper weights are .5 oz
copper.
Many thanks,
Luis Rivera
CompuRoute, Inc.
Dallas, TX
[log in to unmask]
(214) 340-0543
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|