[log in to unmask] wrote:
> We currently use conventional green soldermask on our doublesided FR-4
> boards.  For a special application, we need the top of the board to be mostly
> white.  Is there a white soldermask available?  We make our own boards.

We had a similar requirement for a board under a lighted keypad, and we wanted 
the board to reflect more light. We didn't investigate white soldermask, but 
just screened huge areas of regular ol' white silkscreen ink.... worked GREAT!

onward thru the fog....							Jack

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************