The IEEE Components, Packaging and Manufacturing Technology Society (CPMT
for short) has an annual conference called the "International Electronic
Manufacturing Technology Symposium" which expressly addresses manufacturing
technology as it relates to components and packaging technologies. The 1995
conference had a five paper session devoted to Design for Manufacturing (pp.
438 to 479), and I'm pretty sure the earlier conferences had similar
sessions/papers. Also, the CPMT Society divided their Transactions in 1996
to create a new publication devoted to Manufacturing Technology. Walt
Trybula, Austin Tx, is the editor. Walt was caught up in the SEMATECH
down-sizing (as of 3/31/96), so I don't have a new e-mail for him as yet,
but if anyone wants to get in touch with him, let me know and I will go dig. 

CPMT strives to keep their Transactions readable and comprehensible to the
average engineer (if I can understand them, anyone can!). CPMT would like
more papers for the Mfg. Transactions - they are trying to grow this
publication, and make it useful to the manufacturing community.






>Subject: DES: DFM References
>Author:  [log in to unmask] at internet-mail
>Date:    5/9/96 2:00 AM
>
>
>----------
>X-Sun-Data-Type: text
>X-Sun-Data-Description: text
>X-Sun-Data-Name: text
>X-Sun-Charset: us-ascii
>X-Sun-Content-Lines: 55
>     
>     
>----- Begin Included Message -----
>     
>>From [log in to unmask] Wed May  8 21:51:14 1996 
>Resent-Date: Wed, 8 May 1996 20:49:17 -0700
>Resent-Sender: [log in to unmask] 
>Old-Return-Path: <[log in to unmask]> 
>Date: Wed, 8 May 1996 21:54:46 -0400
>From: [log in to unmask] (Jose Korneluk) 
>To: [log in to unmask], [log in to unmask] 
>Subject: DES: DFM References
>Content-Type: X-sun-attachment
>Resent-Message-Id: <"X8AzH.0.hzK.WrKan"@ipc> 
>Resent-From: [log in to unmask]
>X-Mailing-List: <[log in to unmask]> archive/latest/1698 
>X-Loop: [log in to unmask]
>Resent-Sender: [log in to unmask] 
>Content-Length: 10223
>     
>     
>All concerned:
>     
>Included please find a list of books and magazine article references dealing 
>with PCB Design and DFM.  
>     
>I am posting this list at the request of those individuals who previously 
>helped out and responded to my original request(s) for information.
>     
>A small disclaimer is in order though.  This list is coarsely broken down by 
>subject (more or less), it is not in alphabetical order and in some places 
>does not adhere to any particular quoting or style manual (I do not own any 
>fancy bibliographical software like EndNotes), may contain some repetitions, 
>some of the articles and books are dated, and it is by no means extensive nor 
>complete.  Also, because the information has been culled from many different 
>sources from cyberspace, the contributors are not acknowledged.  I have also 
>resisted numbering the entries for ease of rearranging later.
>     
>If you have additions, changes, deletions, or comments, please e-mail me.  If 
>enough interest is generated, this list can grow into a monthly FAQ-type of 
>posting.  All contributions, contributors, and sources will be duly 
>acknowledged.
>     
>-- Jose'
>     
>+-----------------------------------------------------------------------------+
> Jose' E. Korneluk                                      
> Florida Atlantic University
> [log in to unmask] / [log in to unmask]
>+-----------------------------------------------------------------------------+
> "Sentido comun es el MENOS COMUN de todos los sentidos"
> "Common sense is the LEAST COMMON of all the senses"   ...   Spanish proverb
>+-----------------------------------------------------------------------------+
>     
>----- End Included Message -----
>     
>----------
>X-Sun-Data-Type: default
>X-Sun-Data-Name: dfm.references.txt
>X-Sun-Content-Lines: 279
>X-Sun-Content-Length: 8287
>X-Sun-Charset: us-ascii
>     
>     
>Manufacturing (DFM)
>-------------------
>     
>Manufacturing Processes, 8th ed.
>B.H.Amstead, Phillip F. Ostwald, Myron L. Begeman 
>John Wiley & Sons, 1987, ISBN 0-471-84236-2
>     
>Design for Manufacturability: A Systems Approach to Concurrent Engineering 
>and Ergonomics
>M.Helander and M.Nagamachi, eds.
>Taylor & Francis, 1992, ISBN 0-7484-0009-5
>     
>Anzivino, Rich, The DFM Design Philosophy, Printed Circuit Design, December 
>1994, pp. 14-18.
>     
>Webb, Scott E., Implementing DFM, Printed Circuit Design, December 1994, 
>pp. 10-13.
>     
>Potechin, Jamey, Integrating DFM, Printed Circuit Design, November 1993, 
>pp. 22-26.
>     
>Blankenhorn, James C., A Rose by Any Other Name Or, What is Design for   
>Manufacturability?, Printed Circuit Design, August 1993, pp. 15-17.
>     
>LeBrun, Jim, Design for Manufacturing, EDN Products Edition, November 17, 1995.
>     
>Mraz, Stephen J., Curing Design Blues, Machine Design, November 7, 1994, 
>pp. 69-72.
>     
>Pallanck, R., Sandberg, E., et. al, How to Make Concurrent Engineering Work, 
>Part 9: Managing the Work Flow, Machine Design.
>     
>Baumgartner, Dan, Quick-Turn Design and DFM, Printed Circuit Fabrication, 
>Vol. 19, No. 3, March 1996.
>     
>Jodoin, Claude J., Good Design Means Good Manufacturing, Printed Circuit 
>Design, August 1994, pp. 34-35.
>     
>Jodoin, Claude J., Designer's Viewpoint, Printed Circuit Design, July 1994, 
>pp. 36-37.
>     
>Jodoin, Claude J., Designer's Viewpoint, Printed Circuit Design, March 1995, 
>pp. 58-59.
>     
>Jodoin, Claude J., Designer's Viewpoint, Printed Circuit Design, November
1993, 
>pp. 40-41.
>     
>Glover, Rita, PCB Leapfrogs Into System-Level Design, Electronic Design, 
>April 1st, 1996, pp. 83-84.
>     
>Dolberg, Schmil, Tomorrow's Tools for PCB Preproduction, Printed Circuit 
>Fabrication, May 1995.
>     
>Silva, Joseph, High-Performance Design, Printed Circuit Design, March 1995.
>     
>Gentry, Teresa, Excellence in PCB Design, Printed Circuit Design, Vol. 10, 
>No. 11, November 1993, pp. 16-21.
>     
>Kovarsky, Moshik, Tools of the Trade, Printed Circuit Fabrication, Vol. 19, 
>No. 3, March 1996.
>     
>Neural-Net Autorouter Analyzes Layouts, Adapts Routing Costs, Personal 
>Engineering, May 1995, pp. 21-22.
>     
>Lindgren, Russ, Design-Rule Checks Help Users Create Complex Layouts,
Personal  
>Engineering, May 1995, pp. 24-28.
>     
>Potechin, Jamey, The DRC Lie, Printed Circuit Design, August 1994, pp. 18-21.
>     
>Gomez, Dick, Design Reuse Accelerates Board Creation, Electronic Design, 
>July 25, 1992, pp. 77-88.
>     
>     
>     
>Design for Testability (DFT)
>----------------------------
>     
>Tolhurst, Bill, Think Testing During Design, Printed Circuit Design, April 
>1995, pp. 34-35.
>     
>Donlin, Mike, Adopting New DFT Tools Still Calls for Caution, Computer Design, 
>April 1995, pp. 47-54.
>     
>Ambler, T., Bennetts, R.G.B., Bleeker, H., and O'Donnell, G., The Economics of 
>Design for Test, 3-part series, EE-Evaluation Engineering, September, October, 
>November 1994.
>     
>Hurt, Lynn, DFM for Test and the Customer, Printed Circuit Fabrication, 
>Vol. 19, No. 3, March 1996.
>     
>     
>     
>PCB References
>--------------
>     
>The Design & Drafting of Printed Circuits, 2nd. ed. 
>Darryl Lindsey, McGraw-Hill, 1982, ISBN 0-07-037844-4
>     
>Bare Board PWB Design Manual
>Norman S. Einarson
>1995, Printed Circuit Technology
>P.O.Box 334, Burlington, MA 01803
>(617) 272-0938
>     
>     
>PCB References - SMT
>--------------------
>     
>Handbook of Surface Mount Technology
>Stephen W. Hinch, Longman Scientific & Technical copublished in the USA with 
>John Wiley & Sons, 1988,
>ISBN 0-470-21094X (USA only), 0-582-00517-5
>     
>     
>Flexible Circuits
>-----------------
>     
>Handbook of Flexible Circuits
>Ken Gilleo, ed., Van Nostrand Reinhold, 1992, ISBN 0-442-00168-1.
>     
>     
>     
>PCB Construction / Materials
>----------------------------
>     
>Brown, Hal, Material Trends, Printed Circuit Design, Special Supplement, 
>February 1995.
>     
>Matrix of Laminate Suppliers, Printed Circuit Design, Special Supplement, 
>February 1995.
>     
>Sober, Doug, Selecting Core Constructions, Printed Circuit Design, Special 
>Supplement, February 1995.
>     
>DeSantis, John A., An Overview of PCB Constructions, Printed Circuit Design, 
>April 1993, pp. 48-53.
>     
>Davis, Ben, A Tour Through the Board Manufacturing Process, Printed Circuit 
>Design, August 1993, pp. 11-14.
>     
>     
>     
>Design for the Environment (DFE) / Electromagnetic Compliance (EMC) 
>-------------------------------------------------------------------
>     
>Seltzer, G.S., Ahy, R., and Razmi, M., Electromagnetic Theory Imposes 
>Constraints on PC-Board Design, EDN, July 12, 1994, pp. 93-98.
>     
>Silvestro, J., Irwin, C., and Cendes, Z., Computing Radiated Emissions,  
>Printed Circuit Design, January 1995, pp. 14-18.
>     
>Wexler, Al, Simulation for EMC Compliance, Printed Circuit Design, January 
>1995, pp. 25-28.
>     
>Ryan, K., and Cannon, M., Designing to Meet EMC Standards, Printed Circuit 
>Design, January 1995, pp. 20-23.
>     
>Coupling of External Electromagnetic Fields to Transmission Lines 
>A.A. Smith, Jr. John Wiley & Sons, 1977.
>     
>Coupling to Shielded Cables
>E.F. Vance, John Wiley & Sons, 1978.
>     
>Decoupling and Layout of Digital Printed Circuits 
>K.R. Keenan, The Keenan Corp., 1985.
>     
>Digital Design for Interference Specifications 
>R.K. Keenan, The Keenan Corporation, 1983.
>     
>Electromagnetic Compatibility
>J.J. Goedbloed, Prentice Hall, 1992.
>     
>Electromagnetic Compatibility Design Guide 
>E.R. Freeman and M. Sachs, Artech House, 1982.
>     
>Electromagnetic Compatibility Handbook
>N. Violette, D.R.J. White, and M. Violette, Van Nostrand Reinhold, NY 1987.
>     
>Electromagnetic Compatibility in Medical Equipment
>William D. Kimmel and Daryl D. Gerke, (jointly published by) Interpharm Press 
>and IEEE Press, 1996.
>     
>Electromagnetic Compatibility for Product Designers
>Tim Williams, Butterworth Heinemann Ltd. ( ISBN: 0 7506 1264 9 )
>     
>Electromagnetic Interference Reduction in Electronic Systems 
>Jeffrey P. Mills, Prentice Hall, 1993.
>     
>Electrostatic Discharge and Electronic Equipment: A Practical Guide for 
>Designing to Prevent ESD Problems
>Warren Boxleitner, IEEE Press, 1989.
>     
>Electronic System Design: Interference and Noise Control Techniques 
>J.R. Barnes, Prentice-Hall, 1987.
>     
>Electrostatic Discharge: Understand, Stimulate, and Fix ESD Problems 
>Interference Control Technologies, 1986.
>     
>EMC: Electromagnetic Theory to Practical Design
>P.A. Chatterton M.M. Houlden, John Willey & Sons, 1991.
>     
>Grounding and Shielding in Facilities
>R. Morrison and W.H. Lewis, John Wiley and Sons, 1990.
>     
>Grounding and Shielding Techniques in Instrumentation 
>R. Morrison, Third Edition, John Wiley and Sons, 1986.
>     
>High Frequency Measurements and Noise in Electronic Circuits 
>Douglas C. Smith, Van Nostrand Reinhold, 1993
>     
>High-Speed Digital Design: A Handbook of Black Magic 
>Howard W. Johnson and Martin Graham, Prentice-Hall, 1993.
>     
>Introduction to Electromagnetic Compatibility 
>C.R. Paul, John Wiley Interscience, NY, 1992.
>     
>Lightning
>M.A. Uman, Dover Publications, 1984.
>     
>Lightning and Lightning Protection
>W.C. Hart and E.W. Malone, Don White Consultants, 1985.
>     
>Lightning Protection
>Chemical Publishing Co., R.H. Golde, 1973.
>     
>Modern Ferrite Technology
>Alex Goldman, Van Nostrand Reinhold, 1990.
>     
>Noise Reduction Techniques in Electronic Systems, second edition 
>H.W. Ott, John Wiley Interscience, NY, 1988.
>     
>Power Line Filter Design for Switched-Mode Power Supplies 
>M.J. Nave, Van Nostrand Reinhold, 1991.
>     
>Principles and Techniques of Electromagnetic Compatibility 
>Christos Christopoulos, CRC Press, 1995
>     
>Principles of Electromagnetic Compatibility, third edition 
>B. Keiser, Artech House, 1987.
>     
>Printed Circuit Board Design Techniques for EMC Compliance 
>Mark Montrose, IEEE Press, 1995.
>     
>Shipboard Electromagnetics
>Preston E. Law, Jr., Artech House, 1987.
>     
>Maliniak, Lisa, Expert System Ensures EMC-Rules Compliance, Electronic Design, 
>June 10th, 1993, pp. 60-63.
>     
>Maliniak, Lisa, 3D System Modeler Encompasses EMC Analysis, Electronic Design, 
>June 10th, 1993, pp. 64-67.
>     
>Cable Shielding for Electromagnetic Compatibility 
>Anatoly Tsaliovich, Van Nostrand Reinhold, 1995.
>     
>Capacitance, Inductance and Crosstalk Analysis 
>Charles S. Walker, Artech House, 1990.
>     
>Controlling Conducted Emissions by Design 
>J.C. Fluke, Van Nostrand Reinhold, 1991.
>     
>Controlling Radiated Emissions by Design
>Michel Mardiguian, Van Nostrand Reinhold, 1992.
>     
>     
>     
>Standards - ISO 9000
>--------------------
>     
>     
>Standards - ISO 14000
>---------------------
>     
>     
>Standards - IPC
>---------------
>     
>     
>Standards - GMP
>---------------
>     
>
>
Ron Gedney
[log in to unmask]
607-777-4335, fax 4683