TECHNET Archives

1996

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: FWD>assy: hot bar solder jo
From:
Bob Willis <[log in to unmask]>
Date:
11 Jul 96 07:44:05 EDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines) 
If you dont specified the solder thickness on the PCB or have the incorrect land
size for the lead you will result in a low fillet. You will tend to find with
very fine pitch there will be a lack of a fillet on the toe and heel. This in
the real world.

Bob Willis
Electronic Presentation Services
2 Fourth Avenue, Chelmsford, Essex CM1 4HA. England.
Tel: (44) 01245 351502
Fax: (44) 01245 496123
Home Page: http://ourworld.compuserve.com/homepages/bwillis
Email: [log in to unmask]


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************

ATOM RSS1 RSS2