LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

October 2001

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:

Hide Table of Contents

<> (14 Messages)
<Dan Cavaliere> (3 Messages)
<Leonel Jay J. Manuel> (1 Message)
<Peter George Duncan> (39 Messages)
<Rudy Sedlak> (14 Messages)
Adrian Irwin (2 Messages)
Ahne Oosterhof (1 Message)
Alain Savard (3 Messages)
Alan Kreplick (4 Messages)
Alcorn, Brent (1 Message)
Anderson, Greg (IndSys, GEFanuc, NA) (3 Messages)
Andre Leclair (4 Messages)
Andrew Hoggan (7 Messages)
Andy Magee (1 Message)
Anita Sargent (2 Messages)
Ashok Dhawan (4 Messages)
Barbara Burcham (1 Message)
Barmuta, Mike (3 Messages)
Barry Gallegos (2 Messages)
Bartkowaik Christine (1 Message)
bbarr (8 Messages)
Becerra Alejandro (2 Messages)
Bev Christian (11 Messages)
Bill Butman (1 Message)
Bill Davis (4 Messages)
Bill Raymond (6 Messages)
Bissonnette, Jean-Francois (3 Messages)
Bob Perkins (1 Message)
Bob Walker (1 Message)
Bogdan Gabi (1 Message)
Bogert (7 Messages)
Brad A. Smith (1 Message)
Brad Saunders (13 Messages)
Braime, Justin (3 Messages)
Brian Ellis (22 Messages)
Brian L. Guidi (1 Message)
Brian Lukas (1 Message)
Brooks,Bill (2 Messages)
Buccieri, Rich (1 Message)
Buscomb, Scott (3 Messages)
Busko, Wolfgang (4 Messages)
Carl VanWormer (1 Message)
Carroll, George (1 Message)
Cathy Killen (6 Messages)
Charles Caswell (5 Messages)
Charles McMahon (1 Message)
Charlie Pitarys (1 Message)
Cheryl White (1 Message)
Chris Stack (1 Message)
Christopher Lampron (1 Message)
Chuck Brummer (2 Messages)
cmcmahon (2 Messages)
Colin W.T. McVean (1 Message)
Colin Weber (2 Messages)
Crain, Bob (1 Message)
Crepeau, Phil (16 Messages)
Creswick, Steven (2 Messages)
cscholbe (1 Message)
d. terstegge (16 Messages)
D.Terstegge (1 Message)
Dan Fazioli (1 Message)
Darnell, Barry (IndSys, GEFanuc, CDI) (1 Message)
Darrel Therriault (4 Messages)
Dave Pahlas (1 Message)
Dave Roesler (1 Message)
David Bergman (1 Message)
David Douthit (8 Messages)
David Fish (12 Messages)
David Hillman (7 Messages)
David Ricketts (3 Messages)
David Schaefer (1 Message)
DC (1 Message)
Deakin, Roger (1 Message)
Dean Lillibridge (12 Messages)
Debbie Goodwin (1 Message)
Dee Stover (1 Message)
Dennis Fritz (2 Messages)
Dieselberg, Ron (2 Messages)
Don Vischulis (7 Messages)
Dorothy M. Lush (12 Messages)
Dougal Stewart (1 Message)
DUTTON Phil (1 Message)
Earl Moon (61 Messages)
Ed Hare (2 Messages)
Ed Popielarski (1 Message)
Ed Tordahl (2 Messages)
Ed Valentine (2 Messages)
Edward Szpruch (6 Messages)
Edwards, Ted A (AZ75) (1 Message)
Elensky, Richard (8 Messages)
Ellsworth D. Berkowitz (1 Message)
Eric Christison (4 Messages)
Eric Dawson (10 Messages)
Eric Miller (1 Message)
Erickson, Gary (3 Messages)
Estrada, Roland (1 Message)
Flatfield, Cadcam (1 Message)
FOX, Ian (York Rd) (3 Messages)
Franck, George (2 Messages)
Francois Monette (1 Message)
Frank Barber (1 Message)
Frank Davies (1 Message)
Furrow, Robert Gordon (Bob) (2 Messages)
Gaby Bogdan (1 Message)
gacrowell (1 Message)
Galang, Jerry (1 Message)
Gary Bremer (1 Message)
Gary Ferrari (3 Messages)
Gary Koven (1 Message)
Gary McCauley (7 Messages)
Genny Gibbard (5 Messages)
Geoff Layhe (3 Messages)
George Milad (1 Message)
gfalconer (1 Message)
Gilbert Min (2 Messages)
gleason (1 Message)
Glynn Shaw (1 Message)
Graham Collins (5 Messages)
Graham Naisbitt (6 Messages)
Greg Jones (1 Message)
Greg Scott (5 Messages)
Guenter Grossmann (6 Messages)
Guy Ramsey (23 Messages)
Hann Pang (1 Message)
Hans Shin (2 Messages)
Heinz Mader (2 Messages)
Hinners Hans M Civ WRALC/LUGE (11 Messages)
Hiteshew, Michael (2 Messages)
Houston, Terri (3 Messages)
Howard Watson (4 Messages)
hsinsun (1 Message)
Hybiske, Tom (1 Message)
Ilknur Baylakoglu (1 Message)
Inge Schildermans (1 Message)
Ivy (1 Message)
J Larson (1 Message)
Jack Bryant (1 Message)
Jack Crawford (3 Messages)
James W. High (1 Message)
Jana L. Carraway (5 Messages)
Jason Gregory (11 Messages)
Jean-Luc Lehmann (1 Message)
Jeff Ferry (6 Messages)
Jerry Mosur (5 Messages)
Jiang Ping (2 Messages)
Jim Francey (2 Messages)
Jim Gleason (1 Message)
Jim Kittel (3 Messages)
Jim Makela (1 Message)
jinrong (1 Message)
JinSee Goh (1 Message)
John Brewer (4 Messages)
John Fahey (4 Messages)
John Maxwell (4 Messages)
John Nelson (1 Message)
John Parsons (1 Message)
Johnny Kim (1 Message)
Jon Moore (3 Messages)
Jonathan A Noquil (5 Messages)
Jorge Rodriguez (4 Messages)
Joseph Fjelstad (1 Message)
Joseph Keary (1 Message)
Kasprzak, Bill (sys) USX (6 Messages)
Kathy Bergman (1 Message)
Kathy Kuhlow (21 Messages)
Kaye Knotts (2 Messages)
Keach Sasamori (3 Messages)
Keel, Mike (1 Message)
Ken Bly (1 Message)
Ken Fong (1 Message)
Ken Hafften (1 Message)
Ken Patel (11 Messages)
Kevin Stokes (1 Message)
Kirsch, Clif (2 Messages)
KK Chin (3 Messages)
Lampron, Chris (2 Messages)
Larry Koens (2 Messages)
Larry Tawyea (2 Messages)
Lee Whiteman (1 Message)
Lefebvre, Scott (1 Message)
Leo Lambert (4 Messages)
Leo Roos (1 Message)
LI YUAN (1 Message)
Linda Langley (1 Message)
Lon Weffers (1 Message)
Long, Thomas (2 Messages)
Lou Hart (5 Messages)
Louis, Edwin @ CSE (9 Messages)
Lush, Dorothy (2 Messages)
Malewicz Wesley (2 Messages)
Mar DeJoya (1 Message)
Marichu S. Amalin (1 Message)
Mario Hernandez (1 Message)
Marion A. Graybeal (1 Message)
Mark Charlton (3 Messages)
Mark Hargreaves (1 Message)
Mark Orlowski (2 Messages)
Marsico, James (21 Messages)
Mary Jane Chism (4 Messages)
Mason Hu (2 Messages)
Matt Stanik (2 Messages)
McGlaughlin, Jeffrey A (7 Messages)
Mcmaster, Michael (5 Messages)
McMullen, Kerry (1 Message)
mech_eng (1 Message)
Mel Parrish (8 Messages)
Michael Bell (8 Messages)
Michael Forrester (1 Message)
Mike Duggan (1 Message)
Mike Fenner (14 Messages)
Mike Manthe (1 Message)
Mike Manwell (1 Message)
Mike Sewell (1 Message)
Misner, Bruce (4 Messages)
Nancy Reynolds/MKT/HQ/KEMET/US (2 Messages)
Nancy Trumbull (1 Message)
Neda Thrash (2 Messages)
Neil Atkinson (15 Messages)
Nick Ban (1 Message)
Patrick Lam (5 Messages)
Paul Signorelli (1 Message)
Pelchat, Janice (2 Messages)
Pelkey, Glenn (1 Message)
PERALTA, Kevin (BREA) (3 Messages)
peter blokhuis (1 Message)
peter lee (1 Message)
Peter Swanson (2 Messages)
Phil Hinton (2 Messages)
Phil Kinner (3 Messages)
Phil Nutting (17 Messages)
Phil Zarrow (1 Message)
Rafael Aguirre (1 Message)
Randy Brooks (1 Message)
Reid, Lorraine (1 Message)
Richard Hamilton (2 Messages)
Richard W Hinebaugh (3 Messages)
Rick Howieson (3 Messages)
Rick Thompson (6 Messages)
Roger Bilham (2 Messages)
Roger Hammond (2 Messages)
Roger M. Stoops (4 Messages)
Roger Su (1 Message)
Roland Jaquet (2 Messages)
Ross Winters (1 Message)
Rougeux, Scott (1 Message)
Ruby Hazen (2 Messages)
Russell Burdick (1 Message)
Ryan Grant (4 Messages)
S. Miller (1 Message)
Safavi-Bayat Shahed (3 Messages)
Sanjay (1 Message)
Sarrouf, Michael (2 Messages)
Sasha Miladinovic (2 Messages)
Sauer, Steven T. (6 Messages)
Schwarzkopf, Todd (1 Message)
Scott Kauling (3 Messages)
Scott Kramer (2 Messages)
Scott Mcanall (2 Messages)
Sean Clinton (1 Message)
Seth Goodman (1 Message)
shaymaa nabil (1 Message)
Sherry Goodell (1 Message)
Sherry Warner (2 Messages)
Shoda, Steve (2 Messages)
Simms, Michael (2 Messages)
sk zhang (1 Message)
Speers, Samuel @ CSE (1 Message)
Sprowles, Jol (2 Messages)
Steffen, Don E (1 Message)
Stephen Ayotte (1 Message)
Stephen Brown (4 Messages)
Stephen R. Gregory (52 Messages)
Steve Abrahamson (7 Messages)
Steve Kelly (2 Messages)
Steve Owen (3 Messages)
Steve Telgen (3 Messages)
Susana Anaya (2 Messages)
Taheri, Kamran (1 Message)
Ted Ngo (1 Message)
Ted Tontis (1 Message)
Tempea, Ioan (4 Messages)
Thomas Highland (2 Messages)
Thorup, John (3 Messages)
Tim Jensen (1 Message)
Tim Weller (1 Message)
Timothy Reeves (7 Messages)
Todd Thacker (1 Message)
Tom Oliver (1 Message)
Tom Parkinson - Quality System Manager (4 Messages)
Tony Steinke (1 Message)
Tostevin, Bruce (1 Message)
Valladares, Hector A (FL51) (1 Message)
Valquirio Carvalho (2 Messages)
Van Hoang Dinh (1 Message)
Vandendolder, Ron (1 Message)
Waleed Abdel-Hameed (1 Message)
Warren crow (5 Messages)
Weiner Mickey (1 Message)
Wenger, George M (George) (2 Messages)
Werner Engelmaier (16 Messages)
Whittaker, Dewey E. (AZ75) (2 Messages)
Will Cabrera (1 Message)
William Brown (1 Message)
William Raymond (1 Message)
William Sullivan (4 Messages)
Winslow, Hal (1 Message)
Woelfel, Tim (2 Messages)
Young Hwan Ju (1 Message)
Yu-Hung Shiau (2 Messages)
Yuen, Mike (3 Messages)
Yves.Dupuis (2 Messages)

Subject

From

Date

Re: Chloride levels

Fri, 26 Oct 2001 08:16:18 -0500

Re: Chloride levels

Fri, 26 Oct 2001 12:11:25 -0500

Re: Cleanliness evaluation!

Wed, 15 Aug 2001 08:35:07 -0500

Re: Encapsulated Ions

Tue, 31 Jul 2001 07:56:17 -0500

Re: High aspect ratio via qualification

Tue, 31 Jul 2001 07:26:59 -0500

Re: IPC 600

Thu, 2 Aug 2001 17:29:14 EDT

Re: Just a few Questions

Mon, 30 Jul 2001 13:37:26 -0500

Re: Lead Free Surface finishes

Tue, 16 Oct 2001 10:57:45 -0500

press fit pins

Wed, 17 Oct 2001 13:58:17 EDT

Re: PWB ASSEMBLY BURN-IN TEST

Tue, 16 Oct 2001 10:05:24 -0500

Re: Recommendations for developing a mold

Mon, 16 Jul 2001 17:10:50 EDT

Re: Tin/gold Intermetallic

Wed, 24 Oct 2001 16:00:25 -0500

Re: White residue from conformal coating

Thu, 19 Jul 2001 07:38:03 -0500

Re: White residue from conformal coating

Thu, 19 Jul 2001 15:32:12 -0500

PC Board Sanitization

Tue, 2 Oct 2001 10:59:02 -0400

Re: SEHO Wavesoldering

Tue, 16 Oct 2001 09:08:28 -0400

Re: SPC @ WAVE SOLDER

Fri, 5 Oct 2001 09:01:41 -0400

Misplace component

Wed, 15 Aug 2001 08:33:32 +0800

Re: BGA Component Baking - Plastic Body

Fri, 26 Oct 2001 09:19:46 +0800

Re: BGA Component Baking - Plastic Body

Fri, 26 Oct 2001 16:08:10 +0800

Re: BGA pads lifting

Thu, 18 Oct 2001 11:02:28 +0800

Re: bottom side heat sink attachment

Thu, 11 Oct 2001 11:13:06 +0800

Re: Bow & Twist

Thu, 19 Jul 2001 14:44:00 +0800

Re: Bow & Twist

Fri, 20 Jul 2001 09:16:44 +0800

Re: Clearance area around holes

Mon, 30 Jul 2001 08:50:14 +0800

Re: current carrying capacity of PTH

Thu, 11 Oct 2001 10:49:52 +0800

Re: double sided BGAs

Thu, 18 Oct 2001 10:51:08 +0800

Re: ENIG v Immersion Ag

Thu, 4 Oct 2001 09:29:04 +0800

Re: FLEX CIRCUIT FAILURE

Mon, 16 Jul 2001 09:40:12 +0800

Re: Gerber specification

Fri, 20 Jul 2001 09:26:23 +0800

Re: IC Storage

Tue, 9 Oct 2001 13:19:05 +0800

Re: ICT Test Points

Tue, 17 Jul 2001 14:52:36 +0800

Re: IMC's

Tue, 9 Oct 2001 13:16:00 +0800

Re: In Search of Thick Cu PCB Manufacturer

Fri, 26 Oct 2001 09:14:33 +0800

Re: Inspection Criteria

Mon, 23 Jul 2001 09:12:28 +0800

Re: Land Patterns

Mon, 29 Oct 2001 08:11:38 +0800

Re: Land Patterns

Mon, 29 Oct 2001 08:26:45 +0800

Re: Land Patterns

Wed, 31 Oct 2001 08:08:27 +0800

Re: LCC 20-pin 4x4mm

Mon, 15 Oct 2001 07:58:42 +0800

Re: Lead protrusion

Mon, 16 Jul 2001 09:20:55 +0800

Re: Lead protrusion

Tue, 17 Jul 2001 15:00:42 +0800

Re: PCB baking conditions

Thu, 4 Oct 2001 10:08:50 +0800

Re: PCB Moisture Absorption

Mon, 13 Aug 2001 08:57:51 +0800

Re: pin swaging - soldering still required?

Thu, 4 Oct 2001 09:59:34 +0800

Re: Question for the physics "gurus"

Wed, 10 Oct 2001 18:39:19 +0800

Re: Question for the physics "gurus"

Thu, 11 Oct 2001 11:41:28 +0800

Re: Question for the physics "gurus"

Fri, 12 Oct 2001 11:38:00 +0800

Re: Question regarding ENIG and solder mask

Wed, 24 Oct 2001 11:28:19 +0800

Re: Reflow profiling

Fri, 26 Oct 2001 09:59:41 +0800

Re: Reflow profiling

Fri, 26 Oct 2001 13:45:01 +0800

Re: Reflow profiling

Mon, 29 Oct 2001 08:19:19 +0800

Re: Rejected posting to [log in to unmask]

Mon, 30 Jul 2001 10:31:58 +0800

Re: Serialization of PCB's

Thu, 4 Oct 2001 09:01:55 +0800

Re: So long & thanks for all the fish

Fri, 20 Jul 2001 08:42:02 +0800

Re: Solder columns

Thu, 18 Oct 2001 11:17:00 +0800

Re: Solder Joint Defects

Fri, 19 Oct 2001 10:44:12 +0800

Re: Trimming Leads...

Thu, 18 Oct 2001 11:10:21 +0800

Re: Chloride levels

Thu, 25 Oct 2001 22:00:18 EDT

Re: Copper migration

Fri, 5 Oct 2001 13:04:31 EDT

Re: Flip Chip flex circuit

Mon, 13 Aug 2001 21:16:51 EDT

Give up on Solving the 0.25% problem

Mon, 29 Oct 2001 10:27:31 EST

Re: Innerlayer shorts - predictions vs. reality

Thu, 25 Oct 2001 15:21:07 EDT

Re: Palladium solderability problems

Thu, 4 Oct 2001 19:05:09 EDT

PWB Plating--An attempt at answering

Tue, 2 Oct 2001 16:21:56 EDT

Re: PWB Plating--OMG!

Tue, 2 Oct 2001 15:52:48 EDT

Re: Question for the physics "gurus"

Tue, 9 Oct 2001 14:42:04 EDT

Silver vs. Tin vs. ENIG

Wed, 3 Oct 2001 20:05:07 EDT

Re: Tin/gold Intermetallic

Thu, 25 Oct 2001 00:49:40 EDT

Re: Tin/gold Intermetallic

Thu, 25 Oct 2001 07:39:57 EDT

Re: TRI Lawsuit status...

Fri, 5 Oct 2001 13:00:35 EDT

Re: White Residue...

Thu, 25 Oct 2001 15:34:13 EDT

Adrian Irwin

SEHO Wavesoldering

Adrian Irwin

Tue, 16 Oct 2001 07:35:36 -0500

Re: SPC @ WAVE SOLDER

Adrian Irwin

Fri, 5 Oct 2001 10:16:21 +0100

Ahne Oosterhof

Re: Gerber specification

Ahne Oosterhof

Fri, 20 Jul 2001 07:35:18 -0700

Alain Savard

Re: Innerlayer shorts - predictions vs. reality

Alain Savard

Thu, 25 Oct 2001 12:41:29 -0400

Re: Question for the software "gurus" out there

Alain Savard

Wed, 3 Oct 2001 14:50:17 -0400

Re: Serialization of PCB's

Alain Savard

Tue, 2 Oct 2001 14:48:40 -0400

Alan Kreplick

ASTM B867

Alan Kreplick

Wed, 17 Oct 2001 09:14:51 -0400

Cleaning No-Clean

Alan Kreplick

Mon, 16 Jul 2001 16:40:34 -0400

Sn62 vs. Sn63

Alan Kreplick

Wed, 3 Oct 2001 15:26:40 -0400

Re: SPC @ WAVE SOLDER

Alan Kreplick

Fri, 5 Oct 2001 08:16:57 -0400

Alcorn, Brent

Re: PCB layers swapped

Alcorn, Brent

Tue, 16 Oct 2001 13:44:21 -0400

Anderson, Greg (IndSys, GEFanuc, NA)

Re: PC Board Sanitization

Anderson, Greg (IndSys, GEFanuc, NA)

Tue, 2 Oct 2001 12:58:33 -0400

Re: tin on iron and solder on iron

Anderson, Greg (IndSys, GEFanuc, NA)

Mon, 22 Oct 2001 15:15:05 -0400

Re: Weave Exposure...

Anderson, Greg (IndSys, GEFanuc, NA)

Tue, 17 Jul 2001 11:55:12 -0400

Andre Leclair

Smt Low profile connectors

Andre Leclair

Wed, 31 Oct 2001 09:33:48 -0600

SMT part with Backside Ground

Andre Leclair

Tue, 23 Oct 2001 13:39:29 -0500

Re: SMT part with Backside Ground

Andre Leclair

Wed, 24 Oct 2001 11:02:50 -0500

Re: SMT part with Backside Ground

Andre Leclair

Fri, 26 Oct 2001 08:09:02 -0500

Andrew Hoggan

Re: Copper migration

Andrew Hoggan

Mon, 8 Oct 2001 10:11:17 +0100

Re: Palladium solderability problems

Andrew Hoggan

Fri, 5 Oct 2001 10:00:22 +0100

Re: PC Board Sanitization

Andrew Hoggan

Tue, 2 Oct 2001 17:04:03 +0100

Re: Poor wetting on solder joints

Andrew Hoggan

Mon, 8 Oct 2001 15:09:32 +0100

Re: Setting up conformal coating process

Andrew Hoggan

Fri, 5 Oct 2001 10:00:27 +0100

Re: Solder Ball Oxidation in BGA

Andrew Hoggan

Mon, 8 Oct 2001 10:08:01 +0100

Re: SPC @ WAVE SOLDER

Andrew Hoggan

Fri, 5 Oct 2001 14:07:46 +0100

Andy Magee

UL 94V-0 vs 94V-1

Andy Magee

Thu, 11 Oct 2001 12:46:36 -0400

Anita Sargent

Anita Sargent/Endicott/IBM is out of the office.

Anita Sargent

Fri, 5 Oct 2001 04:56:11 -0400

Anita Sargent/Endicott/IBM is out of the office.

Anita Sargent

Fri, 19 Oct 2001 13:28:42 -0400

Ashok Dhawan

Re: Alternative to FR-4

Ashok Dhawan

Fri, 12 Oct 2001 15:02:23 -0500

Re: ESD flooring ideas.

Ashok Dhawan

Wed, 10 Oct 2001 15:52:11 -0500

Re: Holtite Socket

Ashok Dhawan

Tue, 16 Oct 2001 10:24:46 -0500

Re: Panelized Boards

Ashok Dhawan

Tue, 30 Oct 2001 13:48:54 -0600

Barbara Burcham

Re: So long & thanks for all the fish

Barbara Burcham

Thu, 19 Jul 2001 16:35:01 -0500

Barmuta, Mike

Re: Acronym definition

Barmuta, Mike

Mon, 15 Oct 2001 14:27:24 -0700

Re: Cleaning paste when mis-aligned.

Barmuta, Mike

Fri, 26 Oct 2001 08:02:37 -0700

Re: Racks plating up

Barmuta, Mike

Fri, 26 Oct 2001 08:31:27 -0700

Barry Gallegos

PCB FLAME RATINGS

Barry Gallegos

Thu, 11 Oct 2001 08:33:16 -0600

Re: SEHO Wave soldering

Barry Gallegos

Tue, 16 Oct 2001 06:53:47 -0600

Bartkowaik Christine

Re: ICT Test Points

Bartkowaik Christine

Mon, 16 Jul 2001 09:41:41 -0400

bbarr

Re: Leaky Capacitors

bbarr

Mon, 8 Oct 2001 08:03:42 -0400

Panelized Boards

bbarr

Wed, 15 Aug 2001 13:46:28 -0400

Re: PCB depanelling

bbarr

Thu, 18 Oct 2001 12:16:32 -0400

Re: press fit pins

bbarr

Wed, 17 Oct 2001 14:35:24 -0400

Re: Rework Procedures for electronic assemblies.

bbarr

Thu, 25 Oct 2001 16:25:22 -0400

Re: Serialization of PCB's

bbarr

Tue, 2 Oct 2001 13:45:49 -0400

Re: Solder Joint Defects

bbarr

Thu, 18 Oct 2001 08:59:41 -0400

Re: Trimming Leads...

bbarr

Thu, 18 Oct 2001 08:51:27 -0400

Becerra Alejandro

Rework Procedures for electronic assemblies.

Becerra Alejandro

Thu, 25 Oct 2001 14:45:03 -0500

Re: THE ANSWER!! Rework Procedures for electronic assemblie s.

Becerra Alejandro

Thu, 25 Oct 2001 15:59:01 -0500

Bev Christian

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads.. .

Bev Christian

Fri, 26 Oct 2001 12:45:20 -0400

Re: FMA Labs in Northeast US

Bev Christian

Wed, 15 Aug 2001 15:02:03 -0400

Re: Lead Free Surface finishes

Bev Christian

Mon, 15 Oct 2001 09:49:23 -0400

Re: Poor wetting on solder joints

Bev Christian

Mon, 8 Oct 2001 09:19:24 -0400

Re: press fit pins

Bev Christian

Wed, 17 Oct 2001 14:13:26 -0400

Re: THERMOUNT PWB

Bev Christian

Mon, 15 Oct 2001 11:46:15 -0400

tin on iron and solder on iron

Bev Christian

Fri, 19 Oct 2001 17:00:53 -0400

Re: tin on iron and solder on iron

Bev Christian

Mon, 22 Oct 2001 14:34:11 -0400

Re: tin on iron and solder on iron

Bev Christian

Mon, 22 Oct 2001 15:30:51 -0400

Tin/gold Intermetallic

Bev Christian

Wed, 24 Oct 2001 15:39:20 -0400

Re: Tin/gold Intermetallic

Bev Christian

Thu, 25 Oct 2001 07:52:36 -0400

Bill Butman

Re: Reflow profiling

Bill Butman

Thu, 25 Oct 2001 10:03:45 -0700

Bill Davis

BGA Inspection

Bill Davis

Thu, 2 Aug 2001 13:22:51 EDT

Re: ESD flooring ideas.

Bill Davis

Wed, 10 Oct 2001 23:37:14 EDT

IC Storage

Bill Davis

Mon, 8 Oct 2001 11:40:06 EDT

IC Storage

Bill Davis

Mon, 8 Oct 2001 16:59:37 EDT

Bill Raymond

BGA Rework - Cleaning board pads (REPOST)

Bill Raymond

Tue, 23 Oct 2001 14:18:38 -0400

Re: double sided BGAs

Bill Raymond

Thu, 18 Oct 2001 08:07:39 -0400

exposing intermetallic on BGA pads...

Bill Raymond

Tue, 23 Oct 2001 09:31:09 -0400

Re: Hot and cold cycle on BGA's at test and repair...

Bill Raymond

Mon, 8 Oct 2001 11:17:28 -0400

Re: Hot and cold cycle on BGA's at test and repair...

Bill Raymond

Tue, 9 Oct 2001 14:05:14 -0400

Re: Smt Low profile connectors

Bill Raymond

Wed, 31 Oct 2001 11:14:38 -0500

Bissonnette, Jean-Francois

Re: Question for the physics "gurus"

Bissonnette, Jean-Francois

Tue, 9 Oct 2001 15:11:11 -0400

Re: Question for the physics "gurus"

Bissonnette, Jean-Francois

Tue, 9 Oct 2001 16:19:28 -0400

Re: Question for the physics "gurus"

Bissonnette, Jean-Francois

Thu, 11 Oct 2001 08:00:35 -0400

Bob Perkins

Re: PCB layers swapped

Bob Perkins

Wed, 17 Oct 2001 09:40:53 -0700

Bob Walker

Re: Looking for pad layout info for 40 mil BGA

Bob Walker

Thu, 4 Oct 2001 22:05:49 -0400

Bogdan Gabi

Re: Antw: [TN] exposing intermetallic on BGA pads...

Bogdan Gabi

Wed, 24 Oct 2001 13:16:34 +0300

Bogert

Re: Adjusting the alloy composition in the solderpot

Bogert

Thu, 25 Oct 2001 18:12:48 -0400

Re: BUS WIRE

Bogert

Mon, 22 Oct 2001 17:38:16 -0400

Seeking Conformal Coating (Type UR) Removal Process by Solvent Dipping

Bogert

Tue, 2 Oct 2001 17:24:33 -0400

Seeking info on cleaning PWAs with soldered BGAs using ultrasonics

Bogert

Thu, 18 Oct 2001 18:48:08 -0400

Re: Setting up conformal coating process

Bogert

Mon, 1 Oct 2001 18:08:07 -0400

Re: Tantalum Caps

Bogert

Tue, 2 Oct 2001 17:00:46 -0400

Re: Through Hole Oscillator Removal

Bogert

Tue, 23 Oct 2001 17:32:16 -0400

Brad A. Smith

Reflow profiling

Brad A. Smith

Thu, 25 Oct 2001 10:37:19 -0500

Brad Saunders

Re: Assembling T-Lam boards...

Brad Saunders

Wed, 24 Oct 2001 09:09:15 EDT

Re: Assembling T-Lam boards...

Brad Saunders

Wed, 24 Oct 2001 11:08:50 EDT

Re: BUS WIRE

Brad Saunders

Wed, 24 Oct 2001 09:27:57 EDT

Re: Clearance area around holes

Brad Saunders

Mon, 30 Jul 2001 18:33:56 EDT

Re: Cu-In-Cu boards

Brad Saunders

Tue, 2 Oct 2001 10:24:16 EDT

Re: Cu-In-Cu boards

Brad Saunders

Tue, 2 Oct 2001 19:17:26 EDT

Re: Cu-In-Cu boards

Brad Saunders

Tue, 2 Oct 2001 23:32:35 EDT

Re: In Search of Thick Cu PCB Manufacturer

Brad Saunders

Thu, 25 Oct 2001 19:05:20 EDT

Re: Lead Free Surface finishes

Brad Saunders

Mon, 15 Oct 2001 10:04:40 EDT

Re: LEADS FOR LEADLESS CHIP CARIERS

Brad Saunders

Wed, 3 Oct 2001 17:45:32 EDT

Re: LEADS FOR LEADLESS CHIP CARIERS

Brad Saunders

Thu, 4 Oct 2001 08:12:55 EDT

Re: LEADS FOR LEADLESS CHIP CARIERS

Brad Saunders

Thu, 4 Oct 2001 21:32:48 EDT

Re: Question regarding ENIG and solder mask

Brad Saunders

Tue, 23 Oct 2001 14:39:59 EDT

Braime, Justin

Re: Acceleration (g) - Free Unit Conversion Software

Braime, Justin

Wed, 24 Oct 2001 08:15:48 +0100

LCC 20-pin 4x4mm

Braime, Justin

Fri, 12 Oct 2001 08:33:15 +0100

Re: SMT part with Backside Ground

Braime, Justin

Wed, 24 Oct 2001 08:23:04 +0100

Brian Ellis

Re:

Brian Ellis

Wed, 15 Aug 2001 19:02:31 +0300

Re: Adjusting the alloy composition in the solderpot

Brian Ellis

Thu, 25 Oct 2001 10:36:09 +0300

Re: Adjusting the alloy composition in the solderpot

Brian Ellis

Fri, 26 Oct 2001 09:17:50 +0300

Re: Cleaning No-Clean

Brian Ellis

Tue, 17 Jul 2001 11:16:03 +0300

Re: Cleaning paste when mis-aligned.

Brian Ellis

Fri, 26 Oct 2001 17:53:40 +0300

Re: Dewetting

Brian Ellis

Wed, 15 Aug 2001 18:59:44 +0300

Re: ESD flooring ideas.

Brian Ellis

Wed, 10 Oct 2001 18:15:25 +0300

Re: In Search of Thick Cu PCB Manufacturer

Brian Ellis

Thu, 25 Oct 2001 17:42:59 +0300

Re: Just a few Questions

Brian Ellis

Tue, 31 Jul 2001 10:27:54 +0300

Re: PC Board Sanitization

Brian Ellis

Tue, 2 Oct 2001 18:49:31 +0300

Re: PCB Cleaning

Brian Ellis

Thu, 4 Oct 2001 09:47:39 +0300

Re: Question for the physics "gurus"

Brian Ellis

Tue, 9 Oct 2001 22:41:35 +0300

Re: Question for the physics "gurus"

Brian Ellis

Wed, 10 Oct 2001 13:12:37 +0300

Re: Question for the physics "gurus"

Brian Ellis

Thu, 11 Oct 2001 09:07:48 +0300

Re: Question for the physics "gurus"

Brian Ellis

Thu, 11 Oct 2001 18:34:57 +0300

Re: Setting up conformal coating process

Brian Ellis

Fri, 5 Oct 2001 11:44:44 +0300

Re: STRIPPING MAGNET WIRE

Brian Ellis

Wed, 31 Oct 2001 18:54:15 +0200

Re: Unknown substance on PCB

Brian Ellis

Mon, 1 Oct 2001 18:52:49 +0300

Re: Unknown substance on PCB

Brian Ellis

Tue, 2 Oct 2001 07:53:10 +0300

Re: Vapor Phase Soldering material

Brian Ellis

Wed, 17 Oct 2001 09:37:45 +0300

Re: Vapor Phase Soldering material

Brian Ellis

Fri, 19 Oct 2001 12:24:58 +0300

Re: Vapour Phase Soldering material

Brian Ellis

Wed, 17 Oct 2001 15:49:16 +0300

Brian L. Guidi

Uralite

Brian L. Guidi

Mon, 13 Aug 2001 14:21:03 -0400

Brian Lukas

Ceramic Substrate

Brian Lukas

Thu, 4 Oct 2001 10:23:08 -0500

Brooks,Bill

Re: complainer wave guides

Brooks,Bill

Mon, 15 Oct 2001 10:51:21 -0700

Re: Recommendations for developing a mold

Brooks,Bill

Mon, 16 Jul 2001 09:11:17 -0700

Buccieri, Rich

Re: press fit pins

Buccieri, Rich

Wed, 17 Oct 2001 14:57:34 -0400

Buscomb, Scott

Re: Ceramic Substrate

Buscomb, Scott

Thu, 4 Oct 2001 09:53:21 -0600

Serialization of PCB's

Buscomb, Scott

Tue, 2 Oct 2001 10:45:14 -0600

UL ZPMV2 Listings

Buscomb, Scott

Tue, 23 Oct 2001 16:34:50 -0600

Busko, Wolfgang

AW: [TN] Antw: [TN] exposing intermetallic on BGA pads...

Busko, Wolfgang

Thu, 25 Oct 2001 14:12:53 +0200

AW: [TN] Lead Free Surface finishes

Busko, Wolfgang

Mon, 15 Oct 2001 15:18:05 +0200

AW: [TN] Rework Procedures for electronic assemblies.

Busko, Wolfgang

Fri, 26 Oct 2001 10:40:55 +0200

AW: [TN] Through Hole Oscillator Removal

Busko, Wolfgang

Wed, 24 Oct 2001 12:04:45 +0200

Carl VanWormer

Re: Info about IPC email forums

Carl VanWormer

Mon, 22 Oct 2001 07:16:00 -0700

Carroll, George

Re: Seeking Conformal Coating (Type UR) Removal Process by S olvent Dipping

Carroll, George

Wed, 3 Oct 2001 10:57:40 -0400

Cathy Killen

0402 Resistors & Caps

Cathy Killen

Wed, 31 Oct 2001 16:05:01 -0000

Cleaning paste when mis-aligned.

Cathy Killen

Fri, 26 Oct 2001 15:30:18 +0100

Encapsulated Ions

Cathy Killen

Tue, 31 Jul 2001 09:17:27 +0100

Just a few Questions

Cathy Killen

Mon, 30 Jul 2001 13:49:36 +0100

Solder Joint Defects

Cathy Killen

Thu, 18 Oct 2001 12:33:57 +0100

Vacuum Packaging

Cathy Killen

Mon, 29 Oct 2001 12:51:47 -0000

Charles Caswell

Re: Poor wetting on solder joints

Charles Caswell

Sat, 6 Oct 2001 13:53:32 -0500

Re: Question for the physics "gurus"

Charles Caswell

Tue, 9 Oct 2001 13:54:28 -0500

Re: Seeking Conformal Coating (Type UR) Removal Process by Solvent Dipping

Charles Caswell

Tue, 2 Oct 2001 16:35:27 -0500

Re: Tantalum Caps

Charles Caswell

Tue, 2 Oct 2001 13:38:20 -0500

Re: Trimming Leads...

Charles Caswell

Wed, 17 Oct 2001 17:47:07 -0500

Charles McMahon

Re: In Search of Thick Cu PCB Manufacturer

Charles McMahon

Thu, 25 Oct 2001 14:13:27 -0400

Charlie Pitarys

Re: Unknown substance on PCB

Charlie Pitarys

Mon, 1 Oct 2001 16:36:13 -0400

Cheryl White

Chloride levels

Cheryl White

Thu, 25 Oct 2001 16:36:42 -0400

Chris Stack

pin swaging - soldering still required?

Chris Stack

Wed, 3 Oct 2001 14:36:29 -0400

Christopher Lampron

HASL Plating Thickness

Christopher Lampron

Thu, 18 Oct 2001 05:02:27 -0500

Chuck Brummer

Re: ICD

Chuck Brummer

Thu, 19 Jul 2001 15:19:46 -0700

Re: Weave Exposure...

Chuck Brummer

Tue, 17 Jul 2001 08:59:09 -0700

cmcmahon

!"#$

cmcmahon

Tue, 31 Jul 2001 07:44:30 -0700

Company, Inc.

cmcmahon

Tue, 31 Jul 2001 05:56:36 -0700

Colin W.T. McVean

consideration the results of any

Colin W.T. McVean

Sat, 11 Aug 2001 17:14:54 +0100

Colin Weber

Bow & Twist

Colin Weber

Thu, 19 Jul 2001 14:18:33 +1000

Re: Bow & Twist

Colin Weber

Fri, 20 Jul 2001 07:43:55 +1000

Crain, Bob

Re: Solder analysis results - Stratification

Crain, Bob

Tue, 30 Oct 2001 12:45:27 -0500

Crepeau, Phil

Re: Adjusting the alloy composition in the solderpot

Crepeau, Phil

Thu, 25 Oct 2001 16:25:52 -0700

Re: Connector tilt, acceptable or not?

Crepeau, Phil

Tue, 14 Aug 2001 16:52:35 -0700

Re: Cu-In-Cu boards

Crepeau, Phil

Tue, 2 Oct 2001 07:20:31 -0700

Re: Cu-In-Cu boards

Crepeau, Phil

Tue, 2 Oct 2001 07:23:23 -0700

Re: Cu-In-Cu boards

Crepeau, Phil

Tue, 2 Oct 2001 08:37:59 -0700

Re: Lead Free Surface finishes

Crepeau, Phil

Tue, 16 Oct 2001 07:31:40 -0700

Re: Lead Free Surface finishes

Crepeau, Phil

Tue, 16 Oct 2001 11:53:51 -0700

Re: LEADS FOR LEADLESS CHIP CARIERS

Crepeau, Phil

Wed, 3 Oct 2001 14:03:15 -0700

Re: modeling

Crepeau, Phil

Tue, 30 Oct 2001 17:22:11 -0800

Re: Off-Topic - coatings for airplane-home

Crepeau, Phil

Mon, 13 Aug 2001 15:32:34 -0700

Re: Question for the physics "gurus"

Crepeau, Phil

Thu, 11 Oct 2001 07:57:34 -0700

Re: Raw Card Cost Matrix.

Crepeau, Phil

Wed, 10 Oct 2001 07:25:29 -0700

Re: Recommendations for developing a mold

Crepeau, Phil

Mon, 16 Jul 2001 10:08:56 -0700

Re: THERMOUNT PWB

Crepeau, Phil

Mon, 15 Oct 2001 08:53:12 -0700

Re: Through Hole Oscillator Removal

Crepeau, Phil

Tue, 23 Oct 2001 11:34:01 -0700

Re: UL ZPMV2 Listings

Crepeau, Phil

Tue, 23 Oct 2001 15:47:08 -0700

Creswick, Steven

Back-side Device Metallization

Creswick, Steven

Mon, 13 Aug 2001 16:20:40 -0400

Re: Internal Damage to Capacitor

Creswick, Steven

Fri, 19 Oct 2001 07:34:21 -0400

cscholbe

ERROR

cscholbe

Thu, 19 Jul 2001 21:20:01 -0500

d. terstegge

Adjusting the alloy composition in the solderpot

d. terstegge

Wed, 24 Oct 2001 15:28:57 +0100

Re: Adjusting the alloy composition in the solderpot

d. terstegge

Wed, 24 Oct 2001 16:32:04 +0100

Re: Flex delamination?

d. terstegge

Mon, 30 Jul 2001 15:47:00 +0200

Re: HASL Plating Thickness

d. terstegge

Thu, 18 Oct 2001 15:43:33 +0100

Re: HASL thickness spec

d. terstegge

Wed, 18 Jul 2001 17:30:58 +0200

Re: Inspection Criteria

d. terstegge

Mon, 23 Jul 2001 08:40:36 +0200

Re: Land Patterns

d. terstegge

Fri, 26 Oct 2001 13:42:54 +0100

Re: PCB baking conditions

d. terstegge

Thu, 4 Oct 2001 08:41:52 +0100

Re: PCB Cleaning

d. terstegge

Thu, 4 Oct 2001 10:12:33 +0100

Re: Printed Circuit Assembly Cleaning

d. terstegge

Wed, 31 Oct 2001 09:12:43 +0100

Re: Question for the software "gurus" out there

d. terstegge

Thu, 4 Oct 2001 14:48:45 +0100

Re: Rework

d. terstegge

Thu, 2 Aug 2001 09:18:18 +0200

Re: Sn62 vs. Sn63

d. terstegge

Thu, 4 Oct 2001 09:17:54 +0100

Re: Solder Paste Measurements

d. terstegge

Wed, 1 Aug 2001 11:50:07 +0200

Re: SPC @ WAVE SOLDER

d. terstegge

Fri, 5 Oct 2001 17:30:35 +0100

Re: Text Comparing Editor

d. terstegge

Mon, 29 Oct 2001 17:56:33 +0100

D.Terstegge

Re: Gerber specification

D.Terstegge

Thu, 19 Jul 2001 21:10:43 +0200

Dan Fazioli

Re: Cu-In-Cu boards

Dan Fazioli

Tue, 2 Oct 2001 10:45:26 -0400

Darnell, Barry (IndSys, GEFanuc, CDI)

BGA Alignment

Darnell, Barry (IndSys, GEFanuc, CDI)

Thu, 11 Oct 2001 13:31:32 -0400

Darrel Therriault

Re: Assembling T-Lam boards...

Darrel Therriault

Wed, 24 Oct 2001 07:10:06 -0700

Re: Hot and cold cycle on BGA's at test and repair...

Darrel Therriault

Mon, 8 Oct 2001 07:57:27 -0700

Re: PCB layers swapped

Darrel Therriault

Mon, 22 Oct 2001 07:47:43 -0700

Re: PWB ASSEMBLY BURN-IN TEST

Darrel Therriault

Mon, 22 Oct 2001 07:38:17 -0700

Dave Pahlas

Hole Diameters for ENIG Press-fit

Dave Pahlas

Thu, 18 Oct 2001 11:25:13 -0600

Dave Roesler

Re: photoplotting service

Dave Roesler

Wed, 15 Aug 2001 11:52:34 -0500

David Bergman

Call for papers ECWC9

David Bergman

Wed, 24 Oct 2001 16:52:01 -0500

David Douthit

Re:

David Douthit

Wed, 15 Aug 2001 09:09:58 -0700

Re: Connector tilt, acceptable or not?

David Douthit

Tue, 14 Aug 2001 14:06:02 -0700

Re: Hot and cold cycle on BGA's at test and repair...

David Douthit

Mon, 8 Oct 2001 08:48:29 -0700

Re: Hot and cold cycle on BGA's at test and repair...

David Douthit

Mon, 8 Oct 2001 13:02:32 -0700

Re: PC Board Sanitization

David Douthit

Tue, 2 Oct 2001 10:53:07 -0700

Re: Rework

David Douthit

Wed, 1 Aug 2001 22:30:49 -0700

Re: Trimming Leads...

David Douthit

Wed, 17 Oct 2001 14:48:39 -0700

Re: White residue from conformal coating

David Douthit

Wed, 18 Jul 2001 13:02:12 -0700

David Fish

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads.. .

David Fish

Tue, 30 Oct 2001 19:23:36 -0800

Book Review - Coombs "Printed Circuit Handbook"

David Fish

Thu, 18 Oct 2001 13:43:12 -0700

Re: Component Mounting Techniques for Shock and Vibration

David Fish

Tue, 30 Oct 2001 19:39:59 -0800

Re: Graphics products

David Fish

Tue, 31 Jul 2001 21:14:06 -0700

Re: Land pattern for wave soldering

David Fish

Tue, 23 Oct 2001 21:06:56 -0700

Re: Looking for some help.

David Fish

Sat, 6 Oct 2001 09:38:11 -0700

Re: Recycling PWBs

David Fish

Fri, 12 Oct 2001 09:27:04 -0700

Re: Rework Procedures for electronic assemblies.

David Fish

Thu, 25 Oct 2001 16:20:23 -0700

Re: Setting up conformal coating process

David Fish

Wed, 3 Oct 2001 10:48:40 -0700

Re: Setting up conformal coating process

David Fish

Thu, 4 Oct 2001 11:52:27 -0700

Re: SMT part with Backside Ground

David Fish

Wed, 24 Oct 2001 10:33:00 -0700

Re: Solder analysis results

David Fish

Tue, 14 Aug 2001 21:31:59 -0700

David Hillman

Re: Adjusting the alloy composition in the solderpot

David Hillman

Wed, 24 Oct 2001 09:51:29 -0500

Re: Adjusting the alloy composition in the solderpot

David Hillman

Wed, 24 Oct 2001 10:08:11 -0500

Re: Adjusting the alloy composition in the solderpot

David Hillman

Fri, 26 Oct 2001 07:34:00 -0500

Re: ASTM B867

David Hillman

Tue, 23 Oct 2001 08:49:08 -0500

Re: Lead Free Surface finishes

David Hillman

Wed, 24 Oct 2001 11:05:37 -0500

Re: tin on iron and solder on iron

David Hillman

Tue, 23 Oct 2001 07:59:22 -0500

Re: Tin/gold Intermetallic

David Hillman

Wed, 24 Oct 2001 19:29:43 -0500

David Ricketts

Re: Just a question...

David Ricketts

Wed, 18 Jul 2001 13:40:51 -0700

Re: padsPCB question

David Ricketts

Mon, 15 Oct 2001 11:09:33 -0700

Re: PCB layers swapped

David Ricketts

Tue, 16 Oct 2001 18:32:35 -0700

David Schaefer

IPC-2226 : Does it Exist? / HDI Resources

David Schaefer

Tue, 30 Oct 2001 11:52:16 -0500

Re: Question for the physics "gurus"

Tue, 9 Oct 2001 16:43:46 -0500

Deakin, Roger

Re: Unknown substance on PCB

Deakin, Roger

Tue, 2 Oct 2001 09:36:16 +0100

Dean Lillibridge

Re: Capacitor 0603 vs 0402

Dean Lillibridge

Wed, 8 Aug 2001 16:34:14 -0400

Re: Fallout

Dean Lillibridge

Thu, 16 Aug 2001 12:52:13 -0400

Re: In Search of Thick Cu PCB Manufacturer

Dean Lillibridge

Thu, 25 Oct 2001 10:20:02 -0400

Re: Land Patterns

Dean Lillibridge

Fri, 26 Oct 2001 09:02:09 -0400

Re: Land Patterns

Dean Lillibridge

Mon, 29 Oct 2001 08:48:19 -0500

Re: Moisture Sensitive Component Handling & Identification

Dean Lillibridge

Thu, 16 Aug 2001 12:47:13 -0400

Re: Panelized Boards

Dean Lillibridge

Wed, 15 Aug 2001 14:45:18 -0400

PCMCIA ENCLOSURES

Dean Lillibridge

Thu, 18 Oct 2001 09:06:12 -0400

Re: press fit pins

Dean Lillibridge

Wed, 17 Oct 2001 14:22:17 -0400

Re: To wave or not to wave, that is the question...

Dean Lillibridge

Thu, 16 Aug 2001 17:16:14 -0400

Re: To wave or not to wave, that is the question...

Dean Lillibridge

Fri, 17 Aug 2001 10:40:16 -0400

TOOL FOR V-GROOVE

Dean Lillibridge

Thu, 11 Oct 2001 12:10:59 -0400

Debbie Goodwin

Re: LCC 20-pin 4x4mm

Debbie Goodwin

Fri, 12 Oct 2001 06:58:01 -0700

Dee Stover

Gerber specification

Dee Stover

Thu, 19 Jul 2001 10:37:05 -0700

Dennis Fritz

Re: IPC-2226 : Does it Exist? / HDI Resources

Dennis Fritz

Tue, 30 Oct 2001 14:27:36 EST

Re: Laser trimming of resistors

Dennis Fritz

Thu, 25 Oct 2001 21:32:46 EDT

Dieselberg, Ron

Re: pin swaging - soldering still required?

Dieselberg, Ron

Thu, 4 Oct 2001 13:41:31 -0400

Re: tin on iron and solder on iron

Dieselberg, Ron

Tue, 23 Oct 2001 12:22:43 -0400

Don Vischulis

Re: Copper migration

Don Vischulis

Sun, 7 Oct 2001 20:45:34 -0500

Re: In Search of Thick Cu PCB Manufacturer

Don Vischulis

Thu, 25 Oct 2001 09:13:47 -0500

Re: Laser trimming of resistors

Don Vischulis

Thu, 25 Oct 2001 14:22:47 -0500

Re: Process Problem vs Board Problem

Don Vischulis

Thu, 2 Aug 2001 11:25:38 -0600

Re: Solder joints not bonded to copper

Don Vischulis

Wed, 3 Oct 2001 11:40:39 -0500

Re: To wave or not to wave, that is the question...

Don Vischulis

Thu, 16 Aug 2001 16:32:12 -0600

Re: UV and Flex

Don Vischulis

Fri, 3 Aug 2001 11:03:23 -0600

Dorothy M. Lush

Dorothy M. Lush

Mon, 30 Jul 2001 13:44:37 -0700

Re: Component skewing

Dorothy M. Lush

Tue, 2 Oct 2001 11:13:56 -0700

Re: Delamination testing.

Dorothy M. Lush

Fri, 5 Oct 2001 08:51:47 -0700

Re: Gold/Paste

Dorothy M. Lush

Thu, 9 Aug 2001 15:59:05 -0700

Re: Micro SMD WLCSP Rework

Dorothy M. Lush

Tue, 2 Oct 2001 09:42:09 -0700

Re: Misplace component

Dorothy M. Lush

Wed, 15 Aug 2001 10:46:15 -0700

Re: Reflow profiling

Dorothy M. Lush

Sun, 28 Oct 2001 10:40:19 -0800

Re: REPOST: Through Hole Oscillator Removal

Dorothy M. Lush

Sun, 28 Oct 2001 10:41:49 -0800

Re: Rework

Dorothy M. Lush

Wed, 1 Aug 2001 16:05:17 -0700

Re: Rework of 0201 components

Dorothy M. Lush

Wed, 18 Jul 2001 08:36:06 -0700

Re: Solder conditions

Dorothy M. Lush

Fri, 10 Aug 2001 11:12:17 -0700

Re: Tantalum Caps

Dorothy M. Lush

Tue, 2 Oct 2001 11:03:02 -0700

Dougal Stewart

Re: 0402 Resistors & Caps

Dougal Stewart

Wed, 31 Oct 2001 16:32:16 -0000

DUTTON Phil

Re: PCB layers swapped

DUTTON Phil

Wed, 17 Oct 2001 11:00:53 +1000

Earl Moon

Re: # of rework cycle for SMT gullwing component

Earl Moon

Mon, 8 Oct 2001 13:53:38 -0500

Re: # of rework cycle for SMT gullwing component

Earl Moon

Tue, 9 Oct 2001 10:47:07 -0500

Re: Adjusting the alloy composition in the solderpot

Earl Moon

Wed, 24 Oct 2001 10:42:57 -0500

Re: Adjusting the alloy composition in the solderpot

Earl Moon

Thu, 25 Oct 2001 02:58:21 -0500

Re: Antw: [TN] exposing intermetallic on BGA pads...

Earl Moon

Wed, 24 Oct 2001 05:21:07 -0500

Re: Antw: [TN] IMC'S - NO LONGER STIRRING THE POT

Earl Moon

Mon, 22 Oct 2001 12:56:24 -0500

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads.. .

Earl Moon

Fri, 26 Oct 2001 11:52:10 -0500

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads...

Earl Moon

Thu, 25 Oct 2001 08:46:19 -0500

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads...

Earl Moon

Thu, 25 Oct 2001 11:01:54 -0500

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads...

Earl Moon

Fri, 26 Oct 2001 10:30:11 -0700

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads...

Earl Moon

Fri, 26 Oct 2001 11:31:38 -0500

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads...

Earl Moon

Mon, 29 Oct 2001 08:57:58 -0600

Re: BGA Component Baking - Plastic Body

Earl Moon

Thu, 25 Oct 2001 09:10:14 -0500

Re: bottom side heat sink attachment

Earl Moon

Wed, 10 Oct 2001 13:20:40 -0500

Re: Copper Invar Copper and BGA's

Earl Moon

Wed, 31 Oct 2001 12:03:51 -0600

Re: Copper migration

Earl Moon

Fri, 5 Oct 2001 11:29:21 -0500

Re: Copper migration

Earl Moon

Fri, 5 Oct 2001 13:31:28 -0500

Re: Copper migration

Earl Moon

Sun, 7 Oct 2001 02:56:57 -0500

Re: Copper migration

Earl Moon

Sun, 7 Oct 2001 10:24:02 -0500

Re: Copper migration

Earl Moon

Sun, 7 Oct 2001 10:36:44 -0500

Re: Copper migration

Earl Moon

Sun, 7 Oct 2001 13:58:23 -0500

Re: Copper migration

Earl Moon

Mon, 8 Oct 2001 08:35:04 -0500

Re: Copper migration

Earl Moon

Mon, 8 Oct 2001 13:51:14 -0500

Re: Cu-In-Cu boards

Earl Moon

Tue, 2 Oct 2001 02:39:04 -0500

Re: Cu-In-Cu boards

Earl Moon

Tue, 2 Oct 2001 02:41:29 -0500

Re: Cu-In-Cu boards

Earl Moon

Tue, 2 Oct 2001 03:07:15 -0500

Re: Cu-In-Cu boards

Earl Moon

Tue, 2 Oct 2001 03:19:19 -0500

Re: Cu-In-Cu boards

Earl Moon

Tue, 2 Oct 2001 08:20:38 -0500

Re: Cu-In-Cu boards

Earl Moon

Tue, 2 Oct 2001 10:56:53 -0500

Re: Cu-In-Cu boards

Earl Moon

Tue, 2 Oct 2001 13:43:53 -0500

Re: Cu-In-Cu boards

Earl Moon

Tue, 2 Oct 2001 13:51:20 -0500

Re: ENIG v Immersion Ag

Earl Moon

Wed, 3 Oct 2001 08:29:41 -0500

Re: ENIG v Immersion Ag

Earl Moon

Wed, 3 Oct 2001 08:48:16 -0500

Re: Flex technology

Earl Moon

Tue, 9 Oct 2001 12:31:32 -0700

Re: Hot and cold cycle on BGA's at test and repair...

Earl Moon

Mon, 8 Oct 2001 08:19:18 -0500

Re: Hot and cold cycle on BGA's at test and repair...

Earl Moon

Mon, 8 Oct 2001 14:24:06 -0500

Re: IMC's

Earl Moon

Mon, 8 Oct 2001 13:58:54 -0500

Re: IMC's

Earl Moon

Wed, 10 Oct 2001 01:35:05 -0500

IMC'S - NO LONGER STIRRING THE POT

Earl Moon

Tue, 9 Oct 2001 11:34:13 -0500

Re: IMC'S - NO LONGER STIRRING THE POT

Earl Moon

Wed, 10 Oct 2001 12:58:32 -0500

Re: In Search of Thick Cu PCB Manufacturer

Earl Moon

Thu, 25 Oct 2001 08:55:33 -0500

Re: In Search of Thick Cu PCB Manufacturer

Earl Moon

Thu, 25 Oct 2001 09:37:58 -0500

Re: Landless Vias

Earl Moon

Mon, 1 Oct 2001 14:54:48 -0500

Re: Landless Vias

Earl Moon

Tue, 2 Oct 2001 13:58:16 -0500

Re: Laser trimming of resistors

Earl Moon

Thu, 25 Oct 2001 11:11:29 -0500

Re: Leaky Capacitors

Earl Moon

Fri, 5 Oct 2001 11:34:10 -0500

Re: PCB layers swapped

Earl Moon

Mon, 22 Oct 2001 12:43:04 -0500

Re: Poor wetting/Cu migration

Earl Moon

Mon, 8 Oct 2001 10:49:06 -0500

Re: Question regarding ENIG and solder mask

Earl Moon

Tue, 23 Oct 2001 11:35:50 -0500

Re: Reflow profiling

Earl Moon

Thu, 25 Oct 2001 11:20:16 -0500

Re: Reflow profiling

Earl Moon

Mon, 29 Oct 2001 08:52:44 -0600

Re: SMT part with Backside Ground

Earl Moon

Wed, 24 Oct 2001 12:23:05 -0500

solder, adhesives, prepregs, etc.

Earl Moon

Wed, 31 Oct 2001 10:59:18 -0600

Re: SPC @ WAVE SOLDER

Earl Moon

Fri, 5 Oct 2001 11:08:09 -0500

Re: SPC @ WAVE SOLDER

Earl Moon

Fri, 5 Oct 2001 13:24:03 -0500

Re: tin on iron and solder on iron

Earl Moon

Mon, 22 Oct 2001 13:46:39 -0500

Re: tin on iron and solder on iron

Earl Moon

Tue, 23 Oct 2001 09:50:33 -0500

Re: tin on iron and solder on iron

Earl Moon

Tue, 23 Oct 2001 11:48:12 -0500

Re: Tin/gold Intermetallic

Earl Moon

Wed, 24 Oct 2001 15:29:29 -0500

Re: Tin/gold Intermetallic

Earl Moon

Thu, 25 Oct 2001 01:03:22 -0500

Re: Tin/gold Intermetallic

Earl Moon

Thu, 25 Oct 2001 08:33:58 -0500

Ed Hare

Re: solder paste with 2% silver

Ed Hare

Thu, 26 Jul 2001 08:06:12 -0700

Re: solder paste with 2% silver

Ed Hare

Thu, 26 Jul 2001 10:50:23 -0700

Ed Popielarski

BGASolder Ball Rework

Ed Popielarski

Fri, 5 Oct 2001 07:52:41 -0700

Ed Tordahl

LIDC October 23rd Kickoff Meeting.

Ed Tordahl

Fri, 26 Oct 2001 09:55:50 -0400

Long Island, NY area Chapter-IPC Designers Council Kickoff Meeting

Ed Tordahl

Tue, 2 Oct 2001 14:38:52 -0400

Ed Valentine

Re: In-line process

Ed Valentine

Fri, 20 Jul 2001 10:19:07 -0400

Re: Question for the software "gurus" out there

Ed Valentine

Wed, 3 Oct 2001 14:25:05 -0400

Edward Szpruch

Re: Flex delamination?

Edward Szpruch

Mon, 30 Jul 2001 18:08:39 +0200

Re: HASL thickness spec

Edward Szpruch

Thu, 19 Jul 2001 07:23:07 +0200

horizontal lines for flex innerlayers- oxide substitution

Edward Szpruch

Mon, 13 Aug 2001 08:05:18 +0200

Plugged vias

Edward Szpruch

Mon, 16 Jul 2001 09:27:15 +0200

Re: Solder analysis results

Edward Szpruch

Wed, 15 Aug 2001 09:24:43 +0200

Re: Technet accepting posts again

Edward Szpruch

Wed, 31 Oct 2001 08:21:39 +0200

Edwards, Ted A (AZ75)

Re: PCB layers swapped

Edwards, Ted A (AZ75)

Tue, 16 Oct 2001 12:27:04 -0700

Elensky, Richard

Re: Depaneling Tool for V-groved Boards

Elensky, Richard

Thu, 4 Oct 2001 16:44:00 -0700

Re: ESD flooring ideas.

Elensky, Richard

Wed, 10 Oct 2001 08:28:44 -0700

Re: Palladium solderability problems

Elensky, Richard

Thu, 4 Oct 2001 14:01:40 -0700

Re: PCB baking conditions

Elensky, Richard

Wed, 3 Oct 2001 16:57:17 -0700

Re: Quad IVC MK2

Elensky, Richard

Fri, 12 Oct 2001 12:25:04 -0700

Re: Reflow profiling

Elensky, Richard

Thu, 25 Oct 2001 09:44:31 -0700

Re: SMT part with Backside Ground

Elensky, Richard

Wed, 24 Oct 2001 10:38:50 -0700

Re: Tantalum Caps

Elensky, Richard

Tue, 2 Oct 2001 11:27:10 -0700

Ellsworth D. Berkowitz

Re: ICT Test Points

Ellsworth D. Berkowitz

Mon, 16 Jul 2001 15:45:52 -0500

Eric Christison

Re: Flex and Soldering

Eric Christison

Mon, 1 Oct 2001 05:13:37 -0500

Re: Flex and Soldering

Eric Christison

Tue, 2 Oct 2001 05:49:42 -0500

Re: PC Board Sanitization

Eric Christison

Tue, 2 Oct 2001 10:45:39 -0500

Re: Question for the physics "gurus"

Eric Christison

Thu, 11 Oct 2001 09:32:44 -0500

Eric Dawson

Re: Adjusting the alloy composition in the solderpot

Eric Dawson

Thu, 25 Oct 2001 07:53:00 +0100

Re: Adjusting the alloy composition in the solderpot

Eric Dawson

Fri, 26 Oct 2001 09:45:09 +0100

Re: Cleaning paste when misaligned.

Eric Dawson

Mon, 29 Oct 2001 13:34:59 -0000

Re: IC Storage

Eric Dawson

Mon, 8 Oct 2001 17:40:10 +0100

Re: Off-Topic - coatings for airplane-home

Eric Dawson

Tue, 14 Aug 2001 08:22:33 +0100

Re: PC Board Sanitization

Eric Dawson

Tue, 2 Oct 2001 17:04:07 +0100

Re: SMT Pads

Eric Dawson

Fri, 10 Aug 2001 14:59:59 +0100

Re: tin on iron and solder on iron

Eric Dawson

Tue, 23 Oct 2001 08:14:04 +0100

Re: tin on iron and solder on iron

Eric Dawson

Tue, 23 Oct 2001 15:35:33 +0100

Re: Vapour Phase Soldering material

Eric Dawson

Wed, 17 Oct 2001 09:18:24 +0100

Eric Miller

Re: Masking For Conformal Coating

Eric Miller

Fri, 26 Oct 2001 16:15:26 -0700

Erickson, Gary

Re: 0.5 mm pitch components and soldermask relief

Erickson, Gary

Wed, 1 Aug 2001 16:43:08 -0400

Re: IPC-2226 : Does it Exist? / HDI Resources

Erickson, Gary

Tue, 30 Oct 2001 14:44:33 -0500

Re: VIAS in pads...

Erickson, Gary

Thu, 9 Aug 2001 16:11:25 -0400

Estrada, Roland

Re: current carrying capacity of PTH

Estrada, Roland

Wed, 10 Oct 2001 09:30:01 -0600

Flatfield, Cadcam

Delamination testing.

Flatfield, Cadcam

Fri, 5 Oct 2001 12:52:35 +0200

FOX, Ian (York Rd)

Re: HASL Plating Thickness

FOX, Ian (York Rd)

Mon, 22 Oct 2001 09:01:22 +0100

Re: Heat of Combustion

FOX, Ian (York Rd)

Mon, 22 Oct 2001 15:34:01 +0100

Re: Heat of Combustion

FOX, Ian (York Rd)

Mon, 22 Oct 2001 16:39:43 +0100

Franck, George

Re: current carrying capacity of PTH

Franck, George

Wed, 10 Oct 2001 13:05:03 -0400

Re: Solder joints not bonded to copper

Franck, George

Wed, 3 Oct 2001 14:57:14 -0400

Francois Monette

Re: double side BGAs

Francois Monette

Thu, 18 Oct 2001 10:00:59 -0400

Frank Barber

Looking for some help.

Frank Barber

Fri, 5 Oct 2001 11:13:28 -0400

Frank Davies

Re: HASL Plating Thickness

Frank Davies

Thu, 18 Oct 2001 14:14:56 +0100

Furrow, Robert Gordon (Bob)

FMA Labs in Northeast US

Furrow, Robert Gordon (Bob)

Wed, 15 Aug 2001 14:31:13 -0400

Re: Lead Free Surface finishes

Furrow, Robert Gordon (Bob)

Mon, 15 Oct 2001 09:24:37 -0400

Gaby Bogdan

Re: double sided BGAs

Gaby Bogdan

Wed, 17 Oct 2001 19:03:28 +0200

gacrowell

Re: PCB layers swapped

gacrowell

Mon, 22 Oct 2001 10:13:14 -0600

Galang, Jerry

Re: Just a question...

Galang, Jerry

Wed, 18 Jul 2001 16:24:18 -0700

Gary Bremer

Re: PCB baking conditions

Gary Bremer

Wed, 3 Oct 2001 17:40:09 -0700

Gary Ferrari

SNEC Meeting

Gary Ferrari

Mon, 15 Oct 2001 15:28:15 EDT

Re: SNEC Meeting

Gary Ferrari

Mon, 15 Oct 2001 17:16:53 EDT

Re: Thermal Relief in Planes

Gary Ferrari

Tue, 30 Oct 2001 13:31:47 EST

Gary Koven

Re: Question for the software "gurus" out there

Gary Koven

Wed, 3 Oct 2001 14:00:56 -0400

Gary McCauley

Re: Chloride levels

Gary McCauley

Thu, 25 Oct 2001 16:24:39 -0500

Re: Heinz Mader/NMADEH/CH/Ascom ist au?er Haus.

Gary McCauley

Tue, 9 Oct 2001 09:48:16 -0500

Re: PCB FLAME RATINGS

Gary McCauley

Thu, 11 Oct 2001 10:07:44 -0500

Re: Recycling PWBs

Gary McCauley

Wed, 10 Oct 2001 11:17:31 -0500

Used equipment - request for info

Gary McCauley

Wed, 17 Oct 2001 11:24:21 -0500

Re: Vapor Phase Soldering material

Gary McCauley

Tue, 16 Oct 2001 13:10:53 -0500

Re: Vapour Phase Soldering material

Gary McCauley

Wed, 17 Oct 2001 08:27:04 -0500

Genny Gibbard

Re: Blasts from the past?!??

Genny Gibbard

Mon, 29 Oct 2001 10:43:03 -0600

PCB layers swapped

Genny Gibbard

Tue, 16 Oct 2001 11:07:11 -0600

Re: PCB layers swapped

Genny Gibbard

Mon, 22 Oct 2001 10:39:42 -0600

Re: Question for the physics "gurus"

Genny Gibbard

Wed, 10 Oct 2001 18:12:05 -0600

Re: FW: [TN] Question for the physics "gurus"

Genny Gibbard

Wed, 10 Oct 2001 11:23:09 -0600

Geoff Layhe

current carrying capacity of PTH

Geoff Layhe

Wed, 10 Oct 2001 14:40:45 +0100

Re: EN45014

Geoff Layhe

Thu, 4 Oct 2001 15:51:44 +0100

Re: Impedance Discrepency

Geoff Layhe

Tue, 17 Jul 2001 14:15:10 +0100

George Milad

Re: Applying HAL on Electroles Nickel Gold

George Milad

Sun, 15 Jul 2001 12:23:08 EDT

gfalconer

Resin recession

gfalconer

Thu, 18 Oct 2001 19:38:52 +0100

Gilbert Min

Out of office

Gilbert Min

Tue, 23 Oct 2001 01:01:57 +0900

Vent Hole

Gilbert Min

Tue, 17 Jul 2001 18:07:17 +0900

gleason

Re: Inspection Jig/Support

gleason

Tue, 24 Jul 2001 16:47:21 -0700

Glynn Shaw

Wanted: Used TMA

Glynn Shaw

Wed, 31 Oct 2001 08:10:37 -0800

Graham Collins

Re: # of rework cycle for SMT gullwing component

Graham Collins

Tue, 9 Oct 2001 11:17:04 -0400

Re: Blasts from the past?!??

Graham Collins

Mon, 29 Oct 2001 12:25:52 -0500

Re: Question for the software "gurus" out there

Graham Collins

Thu, 4 Oct 2001 07:55:29 -0400

Re: Serialization of PCB's

Graham Collins

Tue, 2 Oct 2001 13:43:05 -0400

Re: Tin/gold Intermetallic

Graham Collins

Thu, 25 Oct 2001 06:44:25 -0400

Graham Naisbitt

Lead Free Surface finishes

Graham Naisbitt

Mon, 15 Oct 2001 11:52:10 +0100

Re: Lead Free Surface finishes

Graham Naisbitt

Tue, 16 Oct 2001 17:37:14 +0100

Misdirected mail

Graham Naisbitt

Thu, 4 Oct 2001 18:02:09 +0100

Re: Setting up conformal coating process

Graham Naisbitt

Thu, 4 Oct 2001 13:00:24 +0100

Re: Setting up conformal coating process

Graham Naisbitt

Fri, 5 Oct 2001 10:05:32 +0100

Re: White residue from conformal coating

Graham Naisbitt

Thu, 19 Jul 2001 10:50:43 +0100

Greg Jones

Re: Reflow profiling

Greg Jones

Thu, 25 Oct 2001 09:54:26 -0700

Greg Scott

Creepage distances for High voltage Circuits

Greg Scott

Tue, 2 Oct 2001 16:32:45 -0700

Re: Land Patterns

Greg Scott

Fri, 26 Oct 2001 11:09:18 -0700

Re: PCB layers swapped

Greg Scott

Wed, 17 Oct 2001 08:35:38 -0700

Re: Raw Card Cost Matrix.

Greg Scott

Wed, 10 Oct 2001 08:56:36 -0700

Re: VIAS in pads...

Greg Scott

Fri, 10 Aug 2001 10:24:05 -0700

Guenter Grossmann

Antw: [TN] exposing intermetallic on BGA pads...

Guenter Grossmann

Wed, 24 Oct 2001 11:27:49 +0200

Antw: [TN] IMC'S - NO LONGER STIRRING THE POT

Guenter Grossmann

Mon, 22 Oct 2001 13:41:22 +0200

Antw: [TN] Solder joints not bonded to copper

Guenter Grossmann

Wed, 3 Oct 2001 17:24:12 +0200

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads...

Guenter Grossmann

Fri, 26 Oct 2001 17:46:06 +0200

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads...

Guenter Grossmann

Mon, 29 Oct 2001 08:30:02 +0100

Re: AW: [TN] Antw: [TN] exposing intermetallic on BGA pads...

Guenter Grossmann

Mon, 29 Oct 2001 08:48:25 +0100

Guy Ramsey

Re: BGA Component Baking - Plastic Body

Guy Ramsey

Thu, 25 Oct 2001 16:27:45 -0400

Re: BGA Component Baking - Plastic Body

Guy Ramsey

Fri, 26 Oct 2001 07:59:14 -0400

Re: Cleaning paste when mis-aligned.

Guy Ramsey

Fri, 26 Oct 2001 10:52:00 -0400

Re: Cleaning paste when misaligned.

Guy Ramsey

Fri, 26 Oct 2001 14:14:34 -0400

Re: Company, Inc.

Guy Ramsey

Mon, 29 Oct 2001 13:13:57 -0500

Re: Component Mass / Pad Geometries

Guy Ramsey

Mon, 23 Jul 2001 13:32:20 -0400

Re: Encoder with contamination.Soldering or Supplier process.

Guy Ramsey

Fri, 3 Aug 2001 14:23:39 -0400

Re: ENIG v Immersion Ag

Guy Ramsey

Wed, 3 Oct 2001 07:06:43 -0400

Re: failing capacitors

Guy Ramsey

Thu, 11 Oct 2001 10:08:53 -0400

Re: failing capacitors

Guy Ramsey

Thu, 11 Oct 2001 10:34:50 -0400

Re: Land Patterns

Guy Ramsey

Fri, 26 Oct 2001 07:59:13 -0400

Re: Lead Free Surface finishes

Guy Ramsey

Mon, 15 Oct 2001 08:52:53 -0400

Re: Reflow profiling

Guy Ramsey

Fri, 26 Oct 2001 08:33:58 -0400

Re: Rework Procedures for electronic assemblies.

Guy Ramsey

Thu, 25 Oct 2001 16:13:28 -0400

Re: SAMTEC surface mount sockets...

Guy Ramsey

Thu, 11 Oct 2001 12:48:54 -0400

Re: Solder conditions

Guy Ramsey

Fri, 10 Aug 2001 17:09:24 -0400

Re: Solving the 0.25% problem

Guy Ramsey

Sun, 28 Oct 2001 21:47:02 -0500

Re: tin on iron and solder on iron

Guy Ramsey

Mon, 22 Oct 2001 14:50:36 -0400

Re: Tin/gold Intermetallic

Guy Ramsey

Wed, 24 Oct 2001 18:10:07 -0400

Re: Tinning Solder Tips

Guy Ramsey

Fri, 26 Oct 2001 10:56:12 -0400

Re: Trimming Leads.(IPC-A-610)

Guy Ramsey

Wed, 24 Oct 2001 18:53:31 -0400

Re: Trimming Leads...

Guy Ramsey

Mon, 22 Oct 2001 14:07:14 -0400

Re: Vacuum Packaging

Guy Ramsey

Mon, 29 Oct 2001 08:30:37 -0500

Hann Pang

Thermally conductive adhesive

Hann Pang

Tue, 16 Oct 2001 11:41:34 +0800

Hans Shin

Re: PC Board Sanitization

Hans Shin

Tue, 2 Oct 2001 10:28:53 -0700

Re: White residue from conformal coating

Hans Shin

Thu, 19 Jul 2001 14:18:47 -0700

Heinz Mader

Heinz Mader/NMADEH/CH/Ascom ist außer Haus.

Heinz Mader

Tue, 9 Oct 2001 01:01:02 +0200

Heinz Mader/NMADEH/CH/Ascom ist außer Haus.

Heinz Mader

Thu, 2 Aug 2001 01:01:11 +0200

Hinners Hans M Civ WRALC/LUGE

Acceleration (g) - Free Unit Conversion Software

Hinners Hans M Civ WRALC/LUGE

Tue, 23 Oct 2001 12:13:29 -0400

Re: Alternative to FR-4

Hinners Hans M Civ WRALC/LUGE

Thu, 11 Oct 2001 13:58:09 -0400

Innerlayer shorts - predictions vs. reality

Hinners Hans M Civ WRALC/LUGE

Thu, 25 Oct 2001 11:44:00 -0400

Re: Mitsui's BN resin system

Hinners Hans M Civ WRALC/LUGE

Tue, 16 Oct 2001 09:36:05 -0400

Re: PCB baking conditions

Hinners Hans M Civ WRALC/LUGE

Thu, 4 Oct 2001 10:46:53 -0400

Re: PCB layers swapped

Hinners Hans M Civ WRALC/LUGE

Tue, 16 Oct 2001 13:29:25 -0400

Re: Question for the physics "gurus"

Hinners Hans M Civ WRALC/LUGE

Tue, 9 Oct 2001 13:31:22 -0400

Re: Racks plating up

Hinners Hans M Civ WRALC/LUGE

Fri, 26 Oct 2001 11:17:53 -0400

Re: Reflow profiling

Hinners Hans M Civ WRALC/LUGE

Thu, 25 Oct 2001 12:37:42 -0400

Re: Reject Marking

Hinners Hans M Civ WRALC/LUGE

Thu, 18 Oct 2001 12:44:41 -0400

Re: Seeking Conformal Coating (Type UR) Removal Process by S olvent Dipping

Hinners Hans M Civ WRALC/LUGE

Wed, 3 Oct 2001 14:53:50 -0400

Hiteshew, Michael

Re: Clearance area around holes

Hiteshew, Michael

Mon, 30 Jul 2001 17:02:35 -0400

FW: [TN] Question for the physics "gurus"

Hiteshew, Michael

Wed, 10 Oct 2001 11:57:12 -0400

Houston, Terri

Re: BGA corner pad

Houston, Terri

Wed, 17 Oct 2001 10:07:43 -0600

Looking for reliable test clip for 128 pin QFP

Houston, Terri

Tue, 30 Oct 2001 10:19:06 -0700

Mitsui's BN resin system

Houston, Terri

Mon, 15 Oct 2001 16:25:25 -0500

Howard Watson

Re: Cleaning paste when misaligned.

Howard Watson

Fri, 26 Oct 2001 11:46:03 -0400

ESD flooring ideas.

Howard Watson

Wed, 10 Oct 2001 10:54:43 -0400

Re: Quad IVC MK2

Howard Watson

Wed, 17 Oct 2001 15:59:29 -0400

Re: Solder Paste Measurements

Howard Watson

Wed, 1 Aug 2001 15:51:44 -0400

hsinsun

Re: Wire Bonding on Rh

hsinsun

Tue, 9 Oct 2001 11:28:18 +0800

Hybiske, Tom

Re: Gerber specification

Hybiske, Tom

Thu, 19 Jul 2001 14:43:32 -0400

Ilknur Baylakoglu

Re: Chloride levels

Ilknur Baylakoglu

Thu, 25 Oct 2001 17:25:20 -0400

Inge Schildermans

Press-fit hole dimensions

Inge Schildermans

Tue, 30 Oct 2001 11:03:03 +0100

Ivy

Sorry~~ I got a Virus

Ivy

Wed, 25 Jul 2001 08:58:37 +0800

J Larson

Re: Chloride levels

J Larson

Fri, 26 Oct 2001 10:34:45 -0500

Jack Bryant

Assembly Inspection/verification.

Jack Bryant

Fri, 10 Aug 2001 22:21:15 -0400

Jack Crawford

Info about IPC email forums

Jack Crawford

Thu, 18 Oct 2001 18:06:10 -0500

Re: THE ANSWER!! Rework Procedures for electronic assemblies.

Jack Crawford

Thu, 25 Oct 2001 15:27:40 -0500

Re: TRI Lawsuit status...

Jack Crawford

Fri, 5 Oct 2001 11:44:26 -0500

James W. High

photoplotting service

James W. High

Wed, 15 Aug 2001 11:45:39 -0400

Jana L. Carraway

Re: Easy Thursday Question!

Jana L. Carraway

Thu, 16 Aug 2001 14:22:28 -0700

Re: Exposed Copper Reliability Data

Jana L. Carraway

Mon, 1 Oct 2001 09:39:36 -0700

Graphics products

Jana L. Carraway

Mon, 30 Jul 2001 14:20:29 -0700

Looking for Joseph Fjelstad

Jana L. Carraway

Fri, 26 Oct 2001 11:08:50 -0700

Re: Looking for Joseph Fjelstad

Jana L. Carraway

Fri, 26 Oct 2001 15:31:52 -0700

Jason Gregory

Re: Anita Sargent/Endicott/IBM is out of the office.

Jason Gregory

Fri, 19 Oct 2001 12:47:29 -0500

Re: double sided BGAs

Jason Gregory

Wed, 17 Oct 2001 12:04:21 -0500

Re: Just a question...

Jason Gregory

Wed, 18 Jul 2001 07:36:52 -0500

Re: Just a question...

Jason Gregory

Wed, 18 Jul 2001 16:09:29 -0500

Re: Out of office

Jason Gregory

Mon, 22 Oct 2001 11:18:11 -0500

Re: Quad IVC MK2

Jason Gregory

Wed, 17 Oct 2001 11:59:23 -0500

Question for the physics "gurus"

Jason Gregory

Tue, 9 Oct 2001 11:00:30 -0500

Question for the software "gurus" out there

Jason Gregory

Wed, 3 Oct 2001 12:34:04 -0500

Re: Question for the software "gurus" out there

Jason Gregory

Wed, 3 Oct 2001 13:47:31 -0500

Re: Solder Paste Measurements

Jason Gregory

Tue, 31 Jul 2001 21:30:43 -0500

Thanks for the replies

Jason Gregory

Wed, 10 Oct 2001 10:33:35 -0500

Jean-Luc Lehmann

Re: D-SUB connector (15 pin size) with 2 power contacts

Jean-Luc Lehmann

Mon, 22 Oct 2001 10:06:16 +0200

Jeff Ferry

BGA Component Baking - Plastic Body

Jeff Ferry

Thu, 25 Oct 2001 08:45:01 -0500

Re: BGA Rework - Cleaning board pads (REPOST)

Jeff Ferry

Tue, 23 Oct 2001 14:36:11 -0500

Re: Rework Procedures for electronic assemblies.

Jeff Ferry

Thu, 25 Oct 2001 16:12:52 -0400

Re: Through Hole Oscillator Removal

Jeff Ferry

Tue, 23 Oct 2001 13:48:32 -0400

Re: uBGA Rework

Jeff Ferry

Thu, 4 Oct 2001 10:38:39 -0400

Re: uBGA Rework

Jeff Ferry

Fri, 5 Oct 2001 09:02:49 -0400

Jerry Mosur

Quad IVC MK2

Jerry Mosur

Fri, 12 Oct 2001 15:05:41 -0400

Quad IVC MK2

Jerry Mosur

Wed, 17 Oct 2001 11:49:38 -0400

Solder Joint Analysis

Jerry Mosur

Tue, 30 Oct 2001 14:11:34 -0500

Re: Thermally Conducting Adhesive

Jerry Mosur

Mon, 22 Oct 2001 14:48:23 -0400

Re: Thermally Conducting Adhesive

Jerry Mosur

Mon, 22 Oct 2001 15:48:25 -0400

Jiang Ping

0.8mm pitch BGA socket

Jiang Ping

Tue, 23 Oct 2001 10:01:04 +0800

Re: Inspection Criteria

Jiang Ping

Mon, 23 Jul 2001 19:39:35 +0800

Jim Francey

Re: diamond impregnated hard gold

Jim Francey

Wed, 18 Jul 2001 17:40:39 EDT

Re: Weave Exposure...

Jim Francey

Tue, 17 Jul 2001 12:08:32 EDT

Jim Gleason

Re: Tantalum Caps

Jim Gleason

Tue, 2 Oct 2001 13:23:55 -0700

Jim Kittel

Attaching Microwave Components

Jim Kittel

Thu, 11 Oct 2001 09:26:53 -0600

Re: Attaching Microwave Components

Jim Kittel

Thu, 11 Oct 2001 14:05:28 -0600

Copper Invar Copper and BGA's

Jim Kittel

Wed, 31 Oct 2001 10:37:09 -0700

Jim Makela

SMT Component Additions teepee

Jim Makela

Wed, 17 Oct 2001 18:44:13 -0500

jinrong

Re: PCB baking conditions

jinrong

Thu, 4 Oct 2001 17:13:06 +0800

JinSee Goh

Additive Trace Repair

JinSee Goh

Tue, 14 Aug 2001 08:55:19 +0800

John Brewer

Re: Leaky Capacitors

John Brewer

Mon, 8 Oct 2001 12:39:39 -0400

loc(k)tite

John Brewer

Tue, 23 Oct 2001 09:49:21 -0400

Re: Question for the physics "gurus"

John Brewer

Thu, 11 Oct 2001 11:48:21 -0400

Re: Thermally Conducting Adhesive

John Brewer

Mon, 22 Oct 2001 15:27:31 -0400

John Fahey

EIA 481-2

John Fahey

Wed, 18 Jul 2001 14:32:09 -0500

REPOST: Through Hole Oscillator Removal

John Fahey

Tue, 23 Oct 2001 12:04:00 -0500

Through Hole Oscillator Removal

John Fahey

Tue, 23 Oct 2001 11:33:05 -0500

Re: Through Hole Oscillator Removal

John Fahey

Tue, 23 Oct 2001 11:24:56 -0700

John Maxwell

Re: Encapsulation Voids

John Maxwell

Fri, 26 Oct 2001 08:41:21 -0300

Re: Internal Damage to Capacitor

John Maxwell

Thu, 18 Oct 2001 20:33:39 -0600

Re: Leaky Capacitors

John Maxwell

Mon, 8 Oct 2001 07:29:46 -0300

Re: Solder Joint Analysis

John Maxwell

Tue, 30 Oct 2001 12:18:59 -0400

John Nelson

unsubscribe

John Nelson

Wed, 10 Oct 2001 13:07:29 -0400

John Parsons

FAB: Registration/Microsection Coupons

John Parsons

Wed, 3 Oct 2001 10:05:13 -0700

Johnny Kim

Re: Cost effective Standard via size.

Johnny Kim

Thu, 16 Aug 2001 08:56:39 +0900

Jon Moore

Re: Conformal Coat Spray Systems

Jon Moore

Fri, 19 Oct 2001 22:22:25 EDT

Re: press fit pins

Jon Moore

Fri, 19 Oct 2001 14:24:22 EDT

Re: Reflow profiling

Jon Moore

Fri, 26 Oct 2001 09:54:17 EDT

Jonathan A Noquil

BGA Solder Ball Rework

Jonathan A Noquil

Fri, 5 Oct 2001 10:15:25 +0800

Component skewing

Jonathan A Noquil

Tue, 2 Oct 2001 13:14:00 +0800

ENIG

Jonathan A Noquil

Mon, 22 Oct 2001 09:04:31 +0800

Lead Free Infos

Jonathan A Noquil

Sat, 6 Oct 2001 12:51:14 +0800

Solder Ball Oxidation in BGA

Jonathan A Noquil

Mon, 8 Oct 2001 07:41:18 +0800

Jorge Rodriguez

Tantalum Caps

Jorge Rodriguez

Tue, 2 Oct 2001 10:28:32 -0700

X-Ray Laminography Services

Jorge Rodriguez

Mon, 23 Jul 2001 14:05:09 -0700

X-Ray Laminography Test

Jorge Rodriguez

Thu, 19 Jul 2001 14:52:35 -0700

Re: X-Ray Laminography Test

Jorge Rodriguez

Fri, 20 Jul 2001 13:18:06 -0700

Joseph Fjelstad

Solving the 0.25% problem

Joseph Fjelstad

Sun, 28 Oct 2001 20:34:35 EST

Joseph Keary

Re: Flex and Soldering

Joseph Keary

Mon, 1 Oct 2001 07:52:28 -0700

Kasprzak, Bill (sys) USX

Re: Blasts from the past?!??

Kasprzak, Bill (sys) USX

Mon, 29 Oct 2001 12:59:55 -0500

Re: Fluxes

Kasprzak, Bill (sys) USX

Tue, 31 Jul 2001 07:55:55 -0400

Re: Just a question...

Kasprzak, Bill (sys) USX

Wed, 18 Jul 2001 07:42:05 -0400

Process Problem vs Board Problem

Kasprzak, Bill (sys) USX

Wed, 1 Aug 2001 08:34:47 -0400

Re: Question for the software "gurus" out there

Kasprzak, Bill (sys) USX

Thu, 4 Oct 2001 07:30:10 -0400

Re: Recommendations for developing a mold

Kasprzak, Bill (sys) USX

Tue, 17 Jul 2001 07:47:31 -0400

Kathy Bergman

Rough Dirllling

Kathy Bergman

Thu, 4 Oct 2001 15:19:03 -0700

Kathy Kuhlow

Re: Blasts from the past?!??

Kathy Kuhlow

Tue, 30 Oct 2001 09:27:52 -0600

Re: Encapsulation Voids

Kathy Kuhlow

Fri, 26 Oct 2001 11:26:21 -0500

Re: failing capacitors

Kathy Kuhlow

Thu, 11 Oct 2001 09:26:42 -0500

Re: failing capacitors

Kathy Kuhlow

Thu, 11 Oct 2001 13:31:55 -0500

Re: failing capacitors

Kathy Kuhlow

Thu, 11 Oct 2001 14:37:49 -0500

Re: Inspection Criteria

Kathy Kuhlow

Fri, 20 Jul 2001 16:24:44 -0500

Re: Inspection Criteria

Kathy Kuhlow

Mon, 23 Jul 2001 08:47:46 -0500

Re: IPC 600

Kathy Kuhlow

Thu, 2 Aug 2001 16:40:48 -0500

Re: Land Patterns

Kathy Kuhlow

Fri, 26 Oct 2001 11:21:11 -0500

Re: Land Patterns

Kathy Kuhlow

Tue, 30 Oct 2001 09:24:13 -0600

Re: Laser trimming of resistors

Kathy Kuhlow

Thu, 25 Oct 2001 11:15:54 -0500

NTC: Just a thanks about BGA/ X-ray question posted earlier

Kathy Kuhlow

Fri, 10 Aug 2001 13:31:09 -0500

Re: Particulate matter

Kathy Kuhlow

Mon, 15 Oct 2001 17:00:14 -0500

Re: PC Board Sanitization

Kathy Kuhlow

Tue, 2 Oct 2001 11:29:04 -0500

Re: PCB depanelling

Kathy Kuhlow

Thu, 18 Oct 2001 10:09:55 -0500

Re: Shiny vs. Dull

Kathy Kuhlow

Thu, 19 Jul 2001 15:05:08 -0500

Re: So long & thanks for all the fish

Kathy Kuhlow

Thu, 19 Jul 2001 16:30:50 -0500

Re: Trimming Leads...

Kathy Kuhlow

Thu, 18 Oct 2001 08:39:32 -0500

Re: Trimming Leads...

Kathy Kuhlow

Thu, 18 Oct 2001 08:45:00 -0500

White residue from conformal coating

Kathy Kuhlow

Wed, 18 Jul 2001 12:24:07 -0500

Re: White residue from conformal coating

Kathy Kuhlow

Wed, 18 Jul 2001 16:10:35 -0500

Kaye Knotts

Alternative to FR-4

Kaye Knotts

Thu, 11 Oct 2001 12:14:38 -0400

Re: PCB layers swapped

Kaye Knotts

Tue, 16 Oct 2001 13:46:47 -0400

Keach Sasamori

Administrative Message-Old E-mails

Keach Sasamori

Mon, 29 Oct 2001 12:40:15 -0600

OT- Virus Warning

Keach Sasamori

Thu, 19 Jul 2001 15:50:47 -0500

Technet accepting posts again

Keach Sasamori

Tue, 30 Oct 2001 10:53:54 -0600

Keel, Mike

Re: Off-Topic - coatings for airplane-home

Keel, Mike

Tue, 14 Aug 2001 14:04:43 -0700

Ken Bly

Signal integrity question

Ken Bly

Sun, 14 Oct 2001 12:20:09 -0700

Ken Fong

Automatic tape and reel machine

Ken Fong

Tue, 16 Oct 2001 13:07:00 +0800

Ken Hafften

Reject Marking

Ken Hafften

Thu, 18 Oct 2001 08:30:00 -0500

Ken Patel

Component Mounting Techniques for Shock and Vibration

Ken Patel

Tue, 30 Oct 2001 09:56:17 -0800

D-SUB connector (15 pin size) with 2 power contacts

Ken Patel

Fri, 19 Oct 2001 09:46:52 -0700

DIN connector & Hardware & Labor cost...

Ken Patel

Mon, 30 Jul 2001 11:41:14 -0700

Header pin (single pin/post)

Ken Patel

Mon, 16 Jul 2001 18:44:49 -0700

Labs in tha Bay Area, that can test FUSE & Inductor specifications.

Ken Patel

Wed, 24 Oct 2001 15:01:17 -0700

Looking for pad layout info for 40 mil BGA

Ken Patel

Thu, 4 Oct 2001 12:40:11 -0700

Re: Question for the physics "gurus"

Ken Patel

Wed, 10 Oct 2001 15:28:36 -0700

Solder mask opening...

Ken Patel

Thu, 18 Oct 2001 09:30:31 -0700

TUV: Color coding of wires in the power supply

Ken Patel

Wed, 24 Oct 2001 14:00:00 -0700

Re: VIAS in pads...

Ken Patel

Thu, 9 Aug 2001 13:55:26 -0700

Re: VIAS in pads...

Ken Patel

Thu, 9 Aug 2001 16:27:35 -0700

Kevin Stokes

Palladium solderability problems

Kevin Stokes

Thu, 4 Oct 2001 15:43:19 -0500

Kirsch, Clif

ENIG v Immersion Ag

Kirsch, Clif

Tue, 2 Oct 2001 16:45:02 -0400

Re: ENIG v Immersion Ag

Kirsch, Clif

Wed, 3 Oct 2001 09:43:19 -0400

KK Chin

Re: bottom side heat sink attachment

KK Chin

Wed, 10 Oct 2001 11:22:25 -0700

Re: Leaky Capacitors

KK Chin

Fri, 5 Oct 2001 09:14:37 -0700

Re: Question for the software "gurus" out there

KK Chin

Wed, 3 Oct 2001 10:58:15 -0700

Lampron, Chris

Re: Flex and Soldering

Lampron, Chris

Mon, 1 Oct 2001 05:36:09 -0400

Re: HASL Plating Thickness

Lampron, Chris

Thu, 18 Oct 2001 08:50:05 -0400

Larry Koens

double sided BGAs

Larry Koens

Wed, 17 Oct 2001 11:32:32 -0500

Re: Sn62 vs. Sn63

Larry Koens

Thu, 4 Oct 2001 07:55:39 -0500

Larry Tawyea

Re: Cooling Rates

Larry Tawyea

Fri, 20 Jul 2001 14:52:44 EDT

Re: HASL Plating Thickness

Larry Tawyea

Fri, 19 Oct 2001 15:36:34 EDT

Lee Whiteman

Re: Vapor Phase Soldering material

Lee Whiteman

Tue, 16 Oct 2001 13:52:08 -0400

Lefebvre, Scott

FW: double sided BGAs Re-work

Lefebvre, Scott

Fri, 19 Oct 2001 15:38:35 -0500

Leo Lambert

Acronym definition

Leo Lambert

Mon, 15 Oct 2001 14:11:28 -0400

Acronyms

Leo Lambert

Mon, 15 Oct 2001 16:57:07 -0400

Re: Palladium solderability problems

Leo Lambert

Fri, 5 Oct 2001 11:53:30 -0400

White residue on cored solder

Leo Lambert

Wed, 3 Oct 2001 15:14:05 -0400

Leo Roos

Re: Chloride levels

Leo Roos

Fri, 26 Oct 2001 08:59:08 -0700

LI YUAN

Interesting Coplanarity ?

LI YUAN

Tue, 14 Aug 2001 16:37:11 -0600

Linda Langley

Tinning Solder Tips

Linda Langley

Fri, 26 Oct 2001 10:32:49 -0400

Lon Weffers

EN45014

Lon Weffers

Thu, 4 Oct 2001 14:21:46 +0200

Long, Thomas

Aqueous Heater Update

Long, Thomas

Fri, 26 Oct 2001 13:47:56 -0500

Aqueous Technologies Corrosion Issue

Long, Thomas

Thu, 18 Oct 2001 09:33:02 -0500

Lou Hart

Re: Adjusting the alloy composition in the solderpot

Lou Hart

Thu, 25 Oct 2001 12:50:56 -0400

Re: Question for the physics "gurus"

Lou Hart

Tue, 9 Oct 2001 16:50:51 -0400

Re: Solder analysis results

Lou Hart

Wed, 15 Aug 2001 09:21:12 -0400

Re: SPC @ WAVE SOLDER

Lou Hart

Fri, 5 Oct 2001 10:54:21 -0400

Re: Tantalum Caps

Lou Hart

Tue, 2 Oct 2001 14:25:23 -0400

Louis, Edwin @ CSE

Re: ENIG v Immersion Ag

Louis, Edwin @ CSE

Wed, 3 Oct 2001 10:17:27 -0400

Re: ENIG v Immersion Ag

Louis, Edwin @ CSE

Wed, 3 Oct 2001 12:33:34 -0400

Heat of Combustion

Louis, Edwin @ CSE

Mon, 22 Oct 2001 08:27:45 -0400

Re: Heat of Combustion

Louis, Edwin @ CSE

Mon, 22 Oct 2001 10:46:05 -0400

PWB Plating

Louis, Edwin @ CSE

Tue, 2 Oct 2001 12:23:14 -0400

Re: PWB Plating--An attempt at answering

Louis, Edwin @ CSE

Wed, 3 Oct 2001 13:31:31 -0400

Re: Solder joints not bonded to copper

Louis, Edwin @ CSE

Wed, 3 Oct 2001 13:41:03 -0400

Thermally Conducting Adhesive

Louis, Edwin @ CSE

Mon, 22 Oct 2001 13:47:56 -0400

Re: Thermally Conducting Adhesive

Louis, Edwin @ CSE

Tue, 23 Oct 2001 09:51:53 -0400

Lush, Dorothy

Re: Fallout

Lush, Dorothy

Wed, 15 Aug 2001 12:04:01 -0700

Re: solder balls

Lush, Dorothy

Tue, 14 Aug 2001 14:05:38 -0700

Malewicz Wesley

BGA PCB mounting material thickness

Malewicz Wesley

Wed, 1 Aug 2001 22:36:20 -0400

Re: In Search of Thick Cu PCB Manufacturer

Malewicz Wesley

Thu, 25 Oct 2001 09:59:16 -0400

Mar DeJoya

Re: Line width and space

Mar DeJoya

Mon, 30 Jul 2001 15:35:52 -0700

Marichu S. Amalin

Poor wetting on solder joints

Marichu S. Amalin

Fri, 5 Oct 2001 08:58:57 +0800

Mario Hernandez

Re: Thermally Conducting Adhesive

Mario Hernandez

Mon, 22 Oct 2001 14:59:46 -0500

Marion A. Graybeal

Re: Mitsui's BN resin system

Marion A. Graybeal

Tue, 16 Oct 2001 09:21:25 -0400

Mark Charlton

Re: ICT Test Points

Mark Charlton

Mon, 16 Jul 2001 09:36:06 -0400

Re: NHB 5300.4 (1C)

Mark Charlton

Fri, 27 Jul 2001 13:47:50 -0400

Vibratory base feeders

Mark Charlton

Tue, 31 Jul 2001 11:10:34 -0400

Mark Hargreaves

HASL thickness spec

Mark Hargreaves

Wed, 18 Jul 2001 10:54:03 -0400

Mark Orlowski

German Inspection Jig/Support

Mark Orlowski

Mon, 30 Jul 2001 14:14:16 -0500

Mark Orlowski/PEMSTAR Inc is out of the office.

Mark Orlowski

Mon, 16 Jul 2001 01:00:54 -0500

Marsico, James

Re: Attaching Microwave Components

Marsico, James

Thu, 11 Oct 2001 16:05:07 -0400

BUS WIRE

Marsico, James

Mon, 22 Oct 2001 10:55:00 -0400

Cu-In-Cu boards

Marsico, James

Mon, 1 Oct 2001 08:14:59 -0400

Re: Cu-In-Cu boards

Marsico, James

Tue, 2 Oct 2001 07:08:50 -0400

Re: Cu-In-Cu boards

Marsico, James

Tue, 2 Oct 2001 10:37:22 -0400

Re: Cu-In-Cu boards

Marsico, James

Tue, 2 Oct 2001 12:44:33 -0400

Re: Cu-In-Cu boards

Marsico, James

Tue, 2 Oct 2001 15:14:40 -0400

Re: Cu-In-Cu boards

Marsico, James

Tue, 2 Oct 2001 12:40:19 -0400

Re: ESD flooring ideas.

Marsico, James

Wed, 10 Oct 2001 12:56:40 -0400

Re: ESD smocks in high temperature and humidity level

Marsico, James

Thu, 9 Aug 2001 16:05:24 -0400

Re: Hot and cold cycle on BGA's at test and repair...

Marsico, James

Mon, 8 Oct 2001 09:11:02 -0400

LEADS FOR LEADLESS CHIP CARIERS

Marsico, James

Wed, 3 Oct 2001 15:36:10 -0400

Re: LEADS FOR LEADLESS CHIP CARIERS

Marsico, James

Thu, 4 Oct 2001 14:51:38 -0400

PWB ASSEMBLY BURN-IN TEST

Marsico, James

Tue, 16 Oct 2001 07:11:33 -0400

Re: PWB ASSEMBLY BURN-IN TEST

Marsico, James

Tue, 16 Oct 2001 12:53:10 -0400

Re: solder balls

Marsico, James

Wed, 15 Aug 2001 06:52:39 -0400

STRIPPING MAGNET WIRE

Marsico, James

Wed, 31 Oct 2001 11:30:42 -0500

THERMOUNT PWB

Marsico, James

Mon, 15 Oct 2001 10:46:03 -0400

Vapor Phase Soldering material

Marsico, James

Mon, 15 Oct 2001 12:48:32 -0400

Re: Vapor Phase Soldering material

Marsico, James

Thu, 18 Oct 2001 12:39:26 -0400

Re: Vapor Phase Soldering material

Marsico, James

Fri, 19 Oct 2001 07:31:09 -0400

Mary Jane Chism

Re: ESD mat material...

Mary Jane Chism

Mon, 30 Jul 2001 07:42:07 -0500

Just a question

Mary Jane Chism

Thu, 19 Jul 2001 01:11:35 -0500

Particulate matter

Mary Jane Chism

Mon, 15 Oct 2001 16:16:49 -0500

Re: Particulate matter

Mary Jane Chism

Mon, 15 Oct 2001 16:56:33 -0500

Mason Hu

Re: Microvia in BGA pad

Mason Hu

Thu, 9 Aug 2001 16:12:32 -0500

Minimum dielectric spacing for 48V trace and GND

Mason Hu

Mon, 29 Oct 2001 19:20:35 -0600

Matt Stanik

Looking for Chicago-area PCB Position

Matt Stanik

Thu, 4 Oct 2001 13:06:46 -0500

Re: STRIPPING MAGNET WIRE

Matt Stanik

Wed, 31 Oct 2001 11:46:29 -0600

McGlaughlin, Jeffrey A

Re: Blasts from the past?!??

McGlaughlin, Jeffrey A

Mon, 29 Oct 2001 11:53:28 -0500

Re: complainer wave guides

McGlaughlin, Jeffrey A

Mon, 15 Oct 2001 13:35:56 -0400

Re: Impedance Discrepency

McGlaughlin, Jeffrey A

Tue, 17 Jul 2001 10:22:24 -0400

Re: padsPCB question

McGlaughlin, Jeffrey A

Mon, 15 Oct 2001 13:03:08 -0400

Re: PCB FLAME RATINGS

McGlaughlin, Jeffrey A

Thu, 11 Oct 2001 11:10:03 -0400

Re: Raw Card Cost Matrix.

McGlaughlin, Jeffrey A

Wed, 10 Oct 2001 10:51:50 -0400

Re: Vapor Phase Soldering material

McGlaughlin, Jeffrey A

Fri, 19 Oct 2001 08:35:28 -0400

Mcmaster, Michael

Re: bottom side heat sink attachment

Mcmaster, Michael

Wed, 10 Oct 2001 13:42:45 -0700

Re: Innerlayer shorts - predictions vs. reality

Mcmaster, Michael

Fri, 26 Oct 2001 16:12:46 -0700

Re: PCB layers swapped

Mcmaster, Michael

Mon, 22 Oct 2001 16:26:06 -0700

Re: Question regarding ENIG and solder mask

Mcmaster, Michael

Tue, 23 Oct 2001 09:25:57 -0700

Re: UL ZPMV2 Listings

Mcmaster, Michael

Tue, 23 Oct 2001 15:59:32 -0700

McMullen, Kerry

Re: 0.8mm pitch BGA socket

McMullen, Kerry

Tue, 23 Oct 2001 08:59:13 -0400

mech_eng

Re: EIA 481-2

mech_eng

Thu, 19 Jul 2001 08:26:00 +0200

Mel Parrish

Re: LEADS FOR LEADLESS CHIP CARIERS

Mel Parrish

Wed, 3 Oct 2001 16:22:07 -0700

Re: Leaky Capacitors

Mel Parrish

Thu, 4 Oct 2001 16:51:43 -0700

Re: Palladium solderability problems

Mel Parrish

Thu, 4 Oct 2001 16:59:40 -0700

Re: Sn62 vs. Sn63

Mel Parrish

Wed, 3 Oct 2001 15:10:07 -0700

Re: tin on iron and solder on iron

Mel Parrish

Mon, 22 Oct 2001 13:16:32 -0700

Re: tin on iron and solder on iron

Mel Parrish

Mon, 22 Oct 2001 14:41:18 -0700

Re: TRI Lawsuit status...

Mel Parrish

Fri, 5 Oct 2001 10:24:17 -0700

Re: Trimming Leads...

Mel Parrish

Thu, 18 Oct 2001 08:15:46 -0700

Michael Bell

Brass/Stainless Stencil Lifetimes????

Michael Bell

Fri, 19 Oct 2001 14:24:59 +1300

Re: Conformal Coat Spray Systems

Michael Bell

Tue, 23 Oct 2001 07:58:14 +1300

Re: IC Storage

Michael Bell

Tue, 9 Oct 2001 08:07:53 +1300

PCB Cleaning

Michael Bell

Thu, 4 Oct 2001 08:49:18 +1200

Re: Question for the physics "gurus"

Michael Bell

Wed, 10 Oct 2001 08:53:37 +1300

Re: Question for the physics "gurus"

Michael Bell

Wed, 10 Oct 2001 09:52:45 +1300

Re: SPC @ WAVE SOLDER

Michael Bell

Mon, 8 Oct 2001 08:21:00 +1300

Re: Trimming Leads...

Michael Bell

Thu, 18 Oct 2001 09:57:45 +1300

Michael Forrester

Temporary Burn-In Ovens

Michael Forrester

Thu, 25 Oct 2001 10:39:31 -0400

Mike Duggan

BGA pads lifting

Mike Duggan

Wed, 17 Oct 2001 14:42:17 -0500

Mike Fenner

Re: # of rework cycle for SMT gullwing component

Mike Fenner

Tue, 9 Oct 2001 16:33:13 +0100

Re: Adjusting the alloy composition in the solderpot

Mike Fenner

Thu, 25 Oct 2001 08:59:55 +0100

Re: Adjusting the alloy composition in the solderpot

Mike Fenner

Thu, 25 Oct 2001 14:53:16 +0100

Re: Adjusting the alloy composition in the solderpot

Mike Fenner

Fri, 26 Oct 2001 08:32:40 +0100

Re: Blasts from the past?!??

Mike Fenner

Mon, 29 Oct 2001 16:45:43 -0000

Re: Blasts from the past?!??

Mike Fenner

Mon, 29 Oct 2001 17:13:58 -0000

Re: Cleaning paste when misaligned.

Mike Fenner

Mon, 29 Oct 2001 10:26:06 -0000

Re: Contamination Concern after Strip

Mike Fenner

Wed, 8 Aug 2001 09:05:23 +0100

Re: Ionics again.

Mike Fenner

Wed, 8 Aug 2001 15:19:56 +0100

Re: Just a question...

Mike Fenner

Wed, 18 Jul 2001 09:23:35 +0100

Re: tin on iron and solder on iron

Mike Fenner

Tue, 23 Oct 2001 09:08:03 +0100

Re: tin on iron and solder on iron

Mike Fenner

Tue, 23 Oct 2001 15:58:54 +0100

Re: Vapor Phase Soldering material

Mike Fenner

Wed, 17 Oct 2001 09:48:20 +0100

Re: Vapor Phase Soldering material

Mike Fenner

Fri, 19 Oct 2001 13:52:26 +0100

Mike Manthe

MIL-P-50884 PAR. A.3.4.7

Mike Manthe

Fri, 19 Oct 2001 17:28:54 -0500

Mike Manwell

Masking For Conformal Coating

Mike Manwell

Fri, 26 Oct 2001 17:30:25 -0500

Mike Sewell

Re: Just a question...

Mike Sewell

Wed, 18 Jul 2001 18:10:54 EDT

Misner, Bruce

Re: Attaching Microwave Components

Misner, Bruce

Thu, 11 Oct 2001 09:52:33 -0600

Re: BGA corner pad

Misner, Bruce

Wed, 17 Oct 2001 11:14:53 -0500

Re: PWB ASSEMBLY BURN-IN TEST

Misner, Bruce

Tue, 16 Oct 2001 10:22:02 -0600

Re: uBGA Rework

Misner, Bruce

Thu, 4 Oct 2001 10:46:11 -0600

Nancy Reynolds/MKT/HQ/KEMET/US

Re: failing capacitors

Nancy Reynolds/MKT/HQ/KEMET/US

Thu, 11 Oct 2001 16:30:34 -0400

Re: Tantalum Caps

Nancy Reynolds/MKT/HQ/KEMET/US

Tue, 2 Oct 2001 23:41:40 -0400

Nancy Trumbull

Re: Solder Joint Defects

Nancy Trumbull

Thu, 18 Oct 2001 09:41:53 -0400

Neda Thrash

Re: Lead protrusion

Neda Thrash

Mon, 16 Jul 2001 09:05:42 -0500

Re: Particulate matter

Neda Thrash

Mon, 15 Oct 2001 16:58:36 -0500

Neil Atkinson

Re: ENIG v Immersion Ag

Neil Atkinson

Wed, 3 Oct 2001 17:57:01 +0100

Re: HASL Plating Thickness

Neil Atkinson

Mon, 22 Oct 2001 08:31:08 +0100

Re: Hot and cold cycle on BGA's at test and repair...

Neil Atkinson

Mon, 8 Oct 2001 16:50:04 +0100

Re: Land pattern for wave soldering

Neil Atkinson

Wed, 24 Oct 2001 09:12:01 +0100

Re: Lead Free Infos

Neil Atkinson

Mon, 8 Oct 2001 09:56:09 +0100

Re: Lead Free Surface finishes

Neil Atkinson

Tue, 16 Oct 2001 09:10:44 +0100

Re: Lead Free Surface finishes

Neil Atkinson

Tue, 16 Oct 2001 16:17:56 +0100

Re: Leaky Capacitors

Neil Atkinson

Mon, 8 Oct 2001 09:23:40 +0100

Re: Poor wetting on solder joints

Neil Atkinson

Mon, 8 Oct 2001 16:39:32 +0100

Re: Question for the physics "gurus"

Neil Atkinson

Wed, 10 Oct 2001 08:03:40 +0100

Re: Question for the physics "gurus"

Neil Atkinson

Wed, 10 Oct 2001 17:08:29 +0100

Re: Question for the physics "gurus"

Neil Atkinson

Thu, 11 Oct 2001 16:07:53 +0100

Re: SPC @ WAVE SOLDER

Neil Atkinson

Fri, 5 Oct 2001 09:15:10 +0100

Re: SPC @ WAVE SOLDER

Neil Atkinson

Fri, 5 Oct 2001 16:05:48 +0100

Unknown substance on PCB

Neil Atkinson

Mon, 1 Oct 2001 16:08:33 +0100

Nick Ban

DC Chapter Kickoff in NY - Oct 23

Nick Ban

Tue, 16 Oct 2001 11:26:24 -0500

Patrick Lam

Depaneling Tool for V-groved Boards

Patrick Lam

Thu, 4 Oct 2001 16:30:23 -0700

Land pattern for wave soldering

Patrick Lam

Tue, 23 Oct 2001 08:26:01 -0700

Re: Land pattern for wave soldering

Patrick Lam

Tue, 23 Oct 2001 09:40:37 -0700

Re: Land pattern for wave soldering

Patrick Lam

Tue, 23 Oct 2001 09:41:43 -0700

Thermal Relief in Planes

Patrick Lam

Tue, 30 Oct 2001 08:39:21 -0800

Paul Signorelli

Re: Hot and cold cycle on BGA's at test and repair...

Paul Signorelli

Mon, 8 Oct 2001 11:54:20 -0500

Pelchat, Janice

Re:

Pelchat, Janice

Mon, 30 Jul 2001 09:23:59 -0500

Re: Inspection Criteria

Pelchat, Janice

Mon, 23 Jul 2001 09:12:00 -0500

Pelkey, Glenn

Re: Sn62 vs. Sn63

Pelkey, Glenn

Wed, 3 Oct 2001 14:04:29 -0700

PERALTA, Kevin (BREA)

Re: Heinz Mader/NMADEH/CH/Ascom ist au?er Haus.

PERALTA, Kevin (BREA)

Tue, 9 Oct 2001 10:24:36 -0400

Re: Particulate matter

PERALTA, Kevin (BREA)

Mon, 15 Oct 2001 17:43:56 -0400

Re: Particulate matter

PERALTA, Kevin (BREA)

Mon, 15 Oct 2001 18:56:54 -0400

peter blokhuis

Re: Acceleration (g) - Free Unit Conversion Software

peter blokhuis

Wed, 24 Oct 2001 11:25:12 -0700

peter lee

BGA Profiling

peter lee

Thu, 25 Oct 2001 15:41:55 -0700

Peter Swanson

Re: Question for the physics "gurus"

Peter Swanson

Thu, 11 Oct 2001 09:20:36 +0100

Re: Thermally Conducting Adhesive

Peter Swanson

Tue, 23 Oct 2001 09:10:43 +0100

Phil Hinton

IMC's

Phil Hinton

Mon, 8 Oct 2001 13:52:21 EDT

Re: IMC's

Phil Hinton

Tue, 9 Oct 2001 18:43:26 EDT

Phil Kinner

Re: Masking For Conformal Coating

Phil Kinner

Mon, 29 Oct 2001 15:10:29 -0000

Re: Seeking Conformal Coating (Type UR) Removal Process by S olvent Dipping

Phil Kinner

Wed, 3 Oct 2001 17:10:37 +0100

Re: Vapor Phase Soldering material

Phil Kinner

Wed, 17 Oct 2001 17:04:07 +0100

Phil Nutting

Re: Assembly Inspection/verification.

Phil Nutting

Mon, 29 Oct 2001 13:17:28 -0500

Re: Cleaning No-Clean

Phil Nutting

Mon, 16 Jul 2001 17:00:53 -0400

Encapsulation Voids

Phil Nutting

Fri, 26 Oct 2001 09:14:38 -0400

failing capacitors

Phil Nutting

Thu, 11 Oct 2001 10:16:46 -0400

Re: failing capacitors

Phil Nutting

Thu, 11 Oct 2001 10:48:51 -0400

Re: failing capacitors

Phil Nutting

Thu, 11 Oct 2001 12:53:40 -0400

Re: failing capacitors

Phil Nutting

Thu, 11 Oct 2001 14:10:49 -0400

Re: failing capacitors

Phil Nutting

Thu, 11 Oct 2001 14:45:38 -0400

Re: failing capacitors

Phil Nutting

Thu, 11 Oct 2001 15:48:41 -0400

Re: failing capacitors

Phil Nutting

Thu, 11 Oct 2001 16:33:55 -0400

Looking for Industrial X-ray machine

Phil Nutting

Fri, 26 Oct 2001 10:38:21 -0400

Re: Panelized Boards

Phil Nutting

Wed, 15 Aug 2001 14:32:08 -0400

Re: PC Board Sanitization

Phil Nutting

Tue, 2 Oct 2001 11:33:57 -0400

Re: Question for the software "gurus" out there

Phil Nutting

Wed, 3 Oct 2001 14:36:00 -0400

Re: SPC @ WAVE SOLDER

Phil Nutting

Fri, 5 Oct 2001 11:26:52 -0400

Re: Text Comparing Editor

Phil Nutting

Mon, 29 Oct 2001 11:30:55 -0500

Re: Thermally conductive adhesive

Phil Nutting

Tue, 16 Oct 2001 08:10:46 -0400

Phil Zarrow

Re: BGA Component Baking - Plastic Body

Phil Zarrow

Fri, 26 Oct 2001 00:22:14 EDT

Rafael Aguirre

Re: Mitsui's BN resin system

Rafael Aguirre

Tue, 16 Oct 2001 11:14:43 -0500

Randy Brooks

What Causes Dlamination

Randy Brooks

Thu, 18 Oct 2001 15:01:42 -0700

Reid, Lorraine

Land Patterns

Reid, Lorraine

Fri, 26 Oct 2001 11:21:20 +0100

Richard Hamilton

Re: Assembly Inspection/verification.

Richard Hamilton

Sat, 11 Aug 2001 09:05:00 -0700

Re: IPC 600

Richard Hamilton

Thu, 2 Aug 2001 15:13:02 -0700

Richard W Hinebaugh

Re: Flex technology

Richard W Hinebaugh

Tue, 9 Oct 2001 12:41:36 -0500

Re: In Search of Thick Cu PCB Manufacturer

Richard W Hinebaugh

Thu, 25 Oct 2001 09:25:22 -0500

Re: Raw Card Cost Matrix.

Richard W Hinebaugh

Wed, 10 Oct 2001 09:22:35 -0500

Rick Howieson

Gold/Paste

Rick Howieson

Thu, 9 Aug 2001 14:53:19 -0600

Re: IPC 600

Rick Howieson

Thu, 2 Aug 2001 15:37:19 -0600

IPC 600

Rick Howieson

Thu, 2 Aug 2001 13:44:51 -0600

Rick Thompson

Assembleon PPS Pro Offline Programming?

Rick Thompson

Fri, 27 Jul 2001 09:16:13 -0700

Conformal Coat Spray Systems

Rick Thompson

Fri, 19 Oct 2001 16:19:41 -0700

Re: Conformal Coat Spray Systems

Rick Thompson

Mon, 22 Oct 2001 07:27:09 -0700

Re: Gold/Paste

Rick Thompson

Thu, 9 Aug 2001 17:17:16 -0700

Re: Reflow profiling

Rick Thompson

Thu, 25 Oct 2001 09:46:45 -0700

Zicon Conformal Coat sprayer?

Rick Thompson

Tue, 16 Oct 2001 13:22:44 -0700

Roger Bilham

Re: IMC'S - NO LONGER STIRRING THE POT

Roger Bilham

Wed, 10 Oct 2001 08:57:41 +0100

Re: modeling

Roger Bilham

Tue, 23 Oct 2001 16:10:25 +0100

Roger Hammond

FAB. Cleaning stainless steel multilayer bonding shims.

Roger Hammond

Tue, 14 Aug 2001 22:34:14 +0100

FDA approval

Roger Hammond

Mon, 13 Aug 2001 12:26:47 +0100

Roger M. Stoops

Re: Capacitor 0603 vs 0402...why not networks and arrays?

Roger M. Stoops

Thu, 9 Aug 2001 16:18:31 -0400

Re: Heinz Mader/NMADEH/CH/Ascom ist au?er Haus.

Roger M. Stoops

Tue, 9 Oct 2001 10:43:30 -0400

Question regarding ENIG and solder mask

Roger M. Stoops

Tue, 23 Oct 2001 11:52:52 -0400

Question regarding ENIG and solder mask & Another Subject

Roger M. Stoops

Tue, 23 Oct 2001 14:58:39 -0400

Roger Su

Landless Vias

Roger Su

Mon, 1 Oct 2001 09:47:58 -0600

Roland Jaquet

Airplane PWB

Roland Jaquet

Sat, 20 Oct 2001 11:09:47 +0200

reminder : PRODUCTRONICA 2001 - 6-9 November - New Munich Trade Fair Centre

Roland Jaquet

Sat, 20 Oct 2001 11:16:48 +0200

Ross Winters

Too Much (good) Information, changing PCs, I can't keep up.

Ross Winters

Mon, 22 Oct 2001 10:29:10 -0700

Rougeux, Scott

SPC @ WAVE SOLDER

Rougeux, Scott

Thu, 4 Oct 2001 09:02:17 -0500

Ruby Hazen

Line width and space

Ruby Hazen

Mon, 30 Jul 2001 10:32:04 -0700

RE: Line width and space

Ruby Hazen

Mon, 30 Jul 2001 15:21:47 -0700

Russell Burdick

Re: Exposed Copper Reliability Data

Russell Burdick

Mon, 1 Oct 2001 08:28:34 -0700

Ryan Grant

Re: double sided BGAs

Ryan Grant

Thu, 18 Oct 2001 09:13:06 -0600

Re: IMC'S - NO LONGER STIRRING THE POT

Ryan Grant

Wed, 10 Oct 2001 10:14:19 -0600

Re: Question for the physics "gurus"

Ryan Grant

Wed, 10 Oct 2001 18:10:01 -0600

Re: Solving the 0.25% problem

Ryan Grant

Mon, 29 Oct 2001 07:53:07 -0700

S. Miller

In Search of Thick Cu PCB Manufacturer

S. Miller

Thu, 25 Oct 2001 09:37:20 EDT

Safavi-Bayat Shahed

Re: 0402 Resistors & Caps

Safavi-Bayat Shahed

Wed, 31 Oct 2001 11:54:39 -0500

Re: IPC-2226 : Does it Exist? / HDI Resources

Safavi-Bayat Shahed

Tue, 30 Oct 2001 14:22:40 -0500

Text Comparing Editor

Safavi-Bayat Shahed

Mon, 29 Oct 2001 10:57:27 -0500

Sanjay

# of rework cycle for SMT gullwing component

Sanjay

Mon, 8 Oct 2001 10:52:08 -0500

Sarrouf, Michael

Re: Question for the physics "gurus"

Sarrouf, Michael

Thu, 11 Oct 2001 09:55:06 -0400

Re: Question for the physics "gurus"

Sarrouf, Michael

Thu, 11 Oct 2001 11:28:29 -0400

Sasha Miladinovic

Re: Question for the software "gurus" out there

Sasha Miladinovic

Thu, 4 Oct 2001 09:03:04 +0200

Re: SMT part with Backside Ground

Sasha Miladinovic

Fri, 26 Oct 2001 10:32:02 +0200

Sauer, Steven T.

Re: PCB FLAME RATINGS

Sauer, Steven T.

Thu, 11 Oct 2001 11:30:46 -0400

Re: press fit pins

Sauer, Steven T.

Wed, 17 Oct 2001 15:25:40 -0400

Re: Quad IVC MK2

Sauer, Steven T.

Wed, 17 Oct 2001 12:40:42 -0400

Re: Trimming Leads...

Sauer, Steven T.

Thu, 18 Oct 2001 08:15:39 -0400

Re: Trimming Leads...

Sauer, Steven T.

Thu, 18 Oct 2001 08:48:25 -0400

Re: Trimming Leads...

Sauer, Steven T.

Tue, 23 Oct 2001 08:50:32 -0400

Schwarzkopf, Todd

Printed Circuit Assembly Cleaning

Schwarzkopf, Todd

Tue, 30 Oct 2001 14:28:22 -0500

Scott Kauling

Re: Adjusting the alloy composition in the solderpot

Scott Kauling

Wed, 24 Oct 2001 08:59:12 -0500

Re: End-of-Line SMT inspection ... need 10x magnification ...

Scott Kauling

Tue, 31 Jul 2001 08:52:58 -0500

Recycling PWBs

Scott Kauling

Wed, 10 Oct 2001 11:09:01 -0500

Scott Kramer

Re: Copper Invar Copper and BGA's

Scott Kramer

Wed, 31 Oct 2001 10:40:38 -0800

Re: Cu-In-Cu boards

Scott Kramer

Wed, 17 Oct 2001 18:31:17 -0500

Scott Mcanall

Re: Solder analysis results

Scott Mcanall

Tue, 14 Aug 2001 19:33:59 EDT

Re: Solderability tests

Scott Mcanall

Sat, 21 Jul 2001 02:08:53 EDT

Sean Clinton

Racks plating up

Sean Clinton

Thu, 25 Oct 2001 13:56:34 -0700

Seth Goodman

Re: Landless Vias

Seth Goodman

Tue, 2 Oct 2001 11:23:32 -0500

shaymaa nabil

Best Cooling method for LNBP10 Series

shaymaa nabil

Mon, 22 Oct 2001 10:41:47 +0200

Sherry Goodell

Re: HASL Plating Thickness

Sherry Goodell

Thu, 18 Oct 2001 19:04:42 -0700

Sherry Warner

Re: STRIPPING MAGNET WIRE

Sherry Warner

Wed, 31 Oct 2001 11:43:59 -0500

uBGA Rework

Sherry Warner

Thu, 4 Oct 2001 10:22:52 -0400

Shoda, Steve

Re: bottom side heat sink attachment

Shoda, Steve

Wed, 10 Oct 2001 15:05:39 -0400

Re: Poor wetting on solder joints

Shoda, Steve

Mon, 8 Oct 2001 10:21:02 -0400

Simms, Michael

Re: PCB FLAME RATINGS

Simms, Michael

Thu, 11 Oct 2001 11:22:04 -0500

Re: PCB FLAME RATINGS

Simms, Michael

Thu, 11 Oct 2001 12:14:28 -0500

sk zhang

some process questions--

sk zhang

Tue, 30 Oct 2001 21:04:06 +0800

Speers, Samuel @ CSE

Re: PCB layers swapped

Speers, Samuel @ CSE

Tue, 16 Oct 2001 16:42:34 -0400

Sprowles, Jol

Ni / Au plating services

Sprowles, Jol

Thu, 4 Oct 2001 13:28:42 -0400

Ni/Au Plating Big Panels

Sprowles, Jol

Thu, 4 Oct 2001 13:26:53 -0400

Steffen, Don E

Re: What Causes Dlamination

Steffen, Don E

Thu, 18 Oct 2001 20:05:52 -0500

Stephen Ayotte

Specs

Stephen Ayotte

Tue, 2 Oct 2001 14:48:33 -0400

Stephen Brown

Component Mass / Pad Geometries

Stephen Brown

Mon, 23 Jul 2001 16:01:37 +0100

PCB depanelling

Stephen Brown

Thu, 18 Oct 2001 15:55:14 +0100

Raw Card Cost Matrix.

Stephen Brown

Wed, 10 Oct 2001 14:35:27 +0100

Re: Vacuum Packaging

Stephen Brown

Mon, 29 Oct 2001 13:43:04 +0000

Stephen R. Gregory

Re:

Stephen R. Gregory

Mon, 23 Jul 2001 13:55:48 EDT

6-pin DIP Optocoupler problem...

Stephen R. Gregory

Mon, 13 Aug 2001 14:40:14 EDT

Re: Adjusting the alloy composition in the solderpot

Stephen R. Gregory

Wed, 24 Oct 2001 11:18:31 EDT

Air filtration units...

Stephen R. Gregory

Fri, 20 Jul 2001 19:23:26 EDT

Assembling T-Lam boards...

Stephen R. Gregory

Tue, 23 Oct 2001 20:37:03 EDT

Re: ASTM B867

Stephen R. Gregory

Wed, 17 Oct 2001 11:12:46 EDT

Re: Attaching Microwave Components

Stephen R. Gregory

Thu, 11 Oct 2001 14:35:03 EDT

Re: BGA PCB mounting material thickness

Stephen R. Gregory

Thu, 2 Aug 2001 08:59:54 EDT

Blasts from the past?!??

Stephen R. Gregory

Mon, 29 Oct 2001 11:36:51 EST

Re: Brass/Stainless Stencil Lifetimes????

Stephen R. Gregory

Thu, 18 Oct 2001 22:02:18 EDT

Re: BUS WIRE

Stephen R. Gregory

Mon, 22 Oct 2001 19:12:19 EDT

Re: Cleaning paste when misaligned.

Stephen R. Gregory

Mon, 29 Oct 2001 08:56:32 EST

Re: Connector tilt, acceptable or not?

Stephen R. Gregory

Tue, 14 Aug 2001 20:40:15 EDT

Flex delamination?

Stephen R. Gregory

Mon, 30 Jul 2001 09:32:21 EDT

Re: Header pin (single pin/post)

Stephen R. Gregory

Mon, 16 Jul 2001 21:56:10 EDT

Re: Inspection Criteria

Stephen R. Gregory

Fri, 20 Jul 2001 18:49:58 EDT

Re: Inspection Criteria

Stephen R. Gregory

Mon, 23 Jul 2001 16:14:25 EDT

Internal Damage to Capacitor

Stephen R. Gregory

Thu, 18 Oct 2001 21:08:43 EDT

Is the Listserver back up?

Stephen R. Gregory

Tue, 30 Oct 2001 10:07:21 EST

Just a question...

Stephen R. Gregory

Tue, 17 Jul 2001 23:37:55 EDT

Re: Just a question...

Stephen R. Gregory

Wed, 18 Jul 2001 19:52:52 EDT

Re: LCC 20-pin 4x4mm

Stephen R. Gregory

Fri, 12 Oct 2001 10:54:36 EDT

Re: LEADS FOR LEADLESS CHIP CARIERS

Stephen R. Gregory

Wed, 3 Oct 2001 16:50:58 EDT

Re: Mitsui's BN resin system

Stephen R. Gregory

Mon, 15 Oct 2001 19:39:46 EDT

Re: modeling

Stephen R. Gregory

Tue, 23 Oct 2001 10:48:47 EDT

Re: No Mail 2 days

Stephen R. Gregory

Wed, 10 Oct 2001 08:45:29 EDT

Re: Off-Topic - coatings for airplane-home

Stephen R. Gregory

Mon, 13 Aug 2001 20:57:38 EDT

Re: PCB layers swapped

Stephen R. Gregory

Tue, 16 Oct 2001 21:21:45 EDT

Re: Poor wetting on solder joints

Stephen R. Gregory

Sat, 6 Oct 2001 00:03:05 EDT

Re: press fit pins

Stephen R. Gregory

Wed, 17 Oct 2001 14:28:23 EDT

Re: Quad IVC MK2

Stephen R. Gregory

Sat, 13 Oct 2001 22:06:24 EDT

Re: Question for the software "gurus" out there

Stephen R. Gregory

Wed, 3 Oct 2001 14:02:37 EDT

SAMTEC surface mount sockets...

Stephen R. Gregory

Thu, 11 Oct 2001 14:52:13 EDT

Re: Searching for reflow oven manufacturer or user

Stephen R. Gregory

Mon, 13 Aug 2001 13:41:42 EDT

Re: Seeking info on cleaning PWAs with soldered BGAs using ultrasonics

Stephen R. Gregory

Thu, 18 Oct 2001 20:21:37 EDT

Re: Shiny vs. Dull

Stephen R. Gregory

Thu, 19 Jul 2001 21:33:56 EDT

Re: Signal integrity question

Stephen R. Gregory

Sun, 14 Oct 2001 15:56:38 EDT

Re: So long & thanks for all the fish

Stephen R. Gregory

Thu, 19 Jul 2001 22:10:01 EDT

Re: Solder analysis results

Stephen R. Gregory

Tue, 14 Aug 2001 22:04:15 EDT

Re: Solder Paste Measurements

Stephen R. Gregory

Tue, 31 Jul 2001 23:19:02 EDT

Re: Solving the 0.25% problem

Stephen R. Gregory

Sun, 28 Oct 2001 20:55:35 EST

Thanks for the replies!

Stephen R. Gregory

Wed, 18 Jul 2001 21:26:39 EDT

Re: tin on iron and solder on iron

Stephen R. Gregory

Fri, 19 Oct 2001 17:12:36 EDT

TRI Lawsuit status...

Stephen R. Gregory

Fri, 5 Oct 2001 09:36:04 EDT

Trimming Leads...

Stephen R. Gregory

Wed, 17 Oct 2001 15:57:57 EDT

Re: Trimming Leads...

Stephen R. Gregory

Wed, 17 Oct 2001 18:04:51 EDT

Re: uBGA Rework...some pictures..

Stephen R. Gregory

Thu, 4 Oct 2001 17:32:15 EDT

Re: Unknown substance on PCB

Stephen R. Gregory

Mon, 1 Oct 2001 12:16:45 EDT

Re: Unknown substance on PCB

Stephen R. Gregory

Tue, 2 Oct 2001 10:09:39 EDT

Re: Vapor Phase Soldering material

Stephen R. Gregory

Tue, 16 Oct 2001 21:09:39 EDT

Waste water treatment systems...

Stephen R. Gregory

Thu, 18 Oct 2001 11:54:39 EDT

White Residue...

Stephen R. Gregory

Thu, 25 Oct 2001 11:11:11 EDT

Steve Abrahamson

Re: Cleaning paste when misaligned.

Steve Abrahamson

Fri, 26 Oct 2001 16:15:53 -0600

Re: Component skewing

Steve Abrahamson

Tue, 2 Oct 2001 13:40:16 -0600

Re: double sided BGAs

Steve Abrahamson

Wed, 17 Oct 2001 10:44:31 -0600

Micro SMD WLCSP Rework

Steve Abrahamson

Tue, 2 Oct 2001 10:09:39 -0600

Micro SMD WLCSP Rework

Steve Abrahamson

Tue, 2 Oct 2001 10:09:39 -0600

Re: PCB baking conditions

Steve Abrahamson

Thu, 4 Oct 2001 08:53:34 -0600

Re: Tantalum Caps

Steve Abrahamson

Tue, 2 Oct 2001 14:19:17 -0600

Steve Kelly

Re: Circuit boards in oil

Steve Kelly

Tue, 24 Jul 2001 14:31:03 -0400

Re: Thermally Conducting Adhesive

Steve Kelly

Mon, 22 Oct 2001 15:07:27 -0400

Steve Owen

Re: double sided BGAs

Steve Owen

Thu, 18 Oct 2001 13:46:50 +0100

Re: Land pattern for wave soldering

Steve Owen

Tue, 23 Oct 2001 17:03:04 +0100

Re: PCB depanelling

Steve Owen

Thu, 18 Oct 2001 16:29:05 +0100

Steve Telgen

Re: Blasts from the past?!??

Steve Telgen

Mon, 29 Oct 2001 12:51:43 -0500

Material specification

Steve Telgen

Fri, 10 Aug 2001 11:52:29 -0400

Re: PCB layers swapped

Steve Telgen

Mon, 22 Oct 2001 13:04:49 -0400

Susana Anaya

Re: Capacitor 0603 vs 0402...why not networks and arrays?

Susana Anaya

Thu, 9 Aug 2001 12:31:57 -0700

Re: Material specification (7781 E-glass)

Susana Anaya

Fri, 10 Aug 2001 15:25:23 -0700

Taheri, Kamran

Re: Just a question...

Taheri, Kamran

Wed, 18 Jul 2001 17:59:25 -0500

Ted Ngo

Re: Question for the physics "gurus"

Ted Ngo

Thu, 11 Oct 2001 09:10:31 -0700

Ted Tontis

Re: Land Patterns

Ted Tontis

Fri, 26 Oct 2001 09:45:32 -0500

Tempea, Ioan

Flex technology

Tempea, Ioan

Tue, 9 Oct 2001 13:33:22 -0400

Laser trimming of resistors

Tempea, Ioan

Thu, 25 Oct 2001 11:55:23 -0400

Re: Looking for Joseph Fjelstad

Tempea, Ioan

Fri, 26 Oct 2001 14:36:49 -0400

Re: SPC @ WAVE SOLDER

Tempea, Ioan

Tue, 9 Oct 2001 08:43:50 -0400

Thomas Highland

Re: Trimming Leads...

Thomas Highland

Thu, 18 Oct 2001 07:20:00 -0500

Re: Trimming Leads...

Thomas Highland

Thu, 18 Oct 2001 08:06:43 -0500

Thorup, John

Re: ESD flooring ideas.

Thorup, John

Wed, 10 Oct 2001 08:45:56 -0700

Re: German Inspection Jig/Support

Thorup, John

Mon, 30 Jul 2001 12:39:52 -0700

Re: X-Ray Laminography Services

Thorup, John

Mon, 23 Jul 2001 14:37:27 -0700

Tim Jensen

Re: VIAS in pads...

Tim Jensen

Thu, 9 Aug 2001 14:15:06 -0400

Tim Weller

Re: Question for the physics "gurus"

Tim Weller

Thu, 11 Oct 2001 09:45:31 -0500

Timothy Reeves

Re: Acronym definition

Timothy Reeves

Mon, 15 Oct 2001 13:06:55 -0700

Re: Copper migration

Timothy Reeves

Mon, 8 Oct 2001 10:40:12 -0700

Re: Copper migration

Timothy Reeves

Tue, 9 Oct 2001 09:56:14 -0700

Re: Mitsui's BN resin system

Timothy Reeves

Tue, 16 Oct 2001 09:37:55 -0700

Re: Question for the physics "gurus"

Timothy Reeves

Tue, 9 Oct 2001 10:23:16 -0700

Re: Question for the physics "gurus"

Timothy Reeves

Thu, 11 Oct 2001 10:56:29 -0700

Re: UL ZPMV2 Listings

Timothy Reeves

Wed, 24 Oct 2001 10:40:43 -0700

Todd Thacker

Re: Thermally Conducting Adhesive

Todd Thacker

Mon, 22 Oct 2001 13:22:35 -0600

Tom Oliver

No Mail 2 days

Tom Oliver

Wed, 10 Oct 2001 08:13:53 -0400

Tom Parkinson - Quality System Manager

Re: Particulate matter

Tom Parkinson - Quality System Manager

Tue, 16 Oct 2001 11:58:23 -0400

Re: pin swaging - soldering still required?

Tom Parkinson - Quality System Manager

Wed, 3 Oct 2001 16:15:34 -0400

Re: Question for the software "gurus" out there

Tom Parkinson - Quality System Manager

Wed, 3 Oct 2001 16:10:04 -0400

Re: Tantalum Caps

Tom Parkinson - Quality System Manager

Tue, 2 Oct 2001 15:57:06 -0400

Tony Steinke

Re: 0.5 mm pitch components and soldermask relief

Tony Steinke

Wed, 1 Aug 2001 15:49:24 -0400

Tostevin, Bruce

Re: Looking for Industrial X-ray machine

Tostevin, Bruce

Mon, 29 Oct 2001 11:26:05 -0600

Valladares, Hector A (FL51)

Re: FW: double sided BGAs Re-work

Valladares, Hector A (FL51)

Fri, 19 Oct 2001 16:46:03 -0400

Valquirio Carvalho

Re: press fit pins

Valquirio Carvalho

Wed, 17 Oct 2001 19:13:53 -0400

Re: Press-fit hole dimensions

Valquirio Carvalho

Tue, 30 Oct 2001 19:50:27 -0500

Van Hoang Dinh

In-line process

Van Hoang Dinh

Fri, 20 Jul 2001 14:55:09 +1000

Vandendolder, Ron

Re: diamond impregnated hard gold

Vandendolder, Ron

Wed, 18 Jul 2001 11:39:07 -0400

Waleed Abdel-Hameed

modeling

Waleed Abdel-Hameed

Tue, 23 Oct 2001 15:38:36 +0200

Warren crow

Re: Antw: [TN] Solder joints not bonded to copper

Warren crow

Wed, 3 Oct 2001 10:59:59 -0500

Re: Depaneling Tool for V-groved Boards

Warren crow

Fri, 5 Oct 2001 09:57:43 -0500

Re: Land Patterns

Warren crow

Fri, 26 Oct 2001 12:53:39 -0500

Re: PCB baking conditions

Warren crow

Thu, 4 Oct 2001 13:25:19 -0500

Solder joints not bonded to copper

Warren crow

Wed, 3 Oct 2001 10:07:30 -0500

Weiner Mickey

Holtite Socket

Weiner Mickey

Tue, 16 Oct 2001 10:40:24 +0300

Wenger, George M (George)

Re: ENIG v Immersion Ag

Wenger, George M (George)

Wed, 3 Oct 2001 08:38:51 -0400

Re: Lead Free Surface finishes

Wenger, George M (George)

Mon, 15 Oct 2001 09:11:23 -0400

Werner Engelmaier

Re: BGA corner pad

Werner Engelmaier

Wed, 17 Oct 2001 11:52:31 EDT

Re: BGA pads lifting

Werner Engelmaier

Wed, 17 Oct 2001 18:56:13 EDT

Re: Ceramic BGA's on FR4,any thermal coefficient problems

Werner Engelmaier

Mon, 30 Jul 2001 23:55:38 EDT

Re: Copper migration

Werner Engelmaier

Sat, 6 Oct 2001 19:10:08 EDT

Re: FLEX CIRCUIT FAILURE

Werner Engelmaier

Sun, 15 Jul 2001 16:09:36 EDT

Re: IMC'S - NO LONGER STIRRING THE POT

Werner Engelmaier

Wed, 10 Oct 2001 20:50:30 EDT

Re: Landless Vias

Werner Engelmaier

Mon, 1 Oct 2001 23:50:52 EDT

Re: LEADS FOR LEADLESS CHIP CARIERS

Werner Engelmaier

Thu, 4 Oct 2001 17:43:28 EDT

Re: modeling

Werner Engelmaier

Tue, 23 Oct 2001 21:00:50 EDT

Re: Poor wetting/Cu migration

Werner Engelmaier

Mon, 8 Oct 2001 11:07:19 EDT

Re: PWB ASSEMBLY BURN-IN TEST

Werner Engelmaier

Tue, 16 Oct 2001 11:35:21 EDT

Re: Question for the physics "gurus"

Werner Engelmaier

Wed, 10 Oct 2001 17:16:33 EDT

Solder columns

Werner Engelmaier

Wed, 17 Oct 2001 18:56:14 EDT

Re: Solder Joint Analysis

Werner Engelmaier

Tue, 30 Oct 2001 16:35:38 EST

Re: [LF] Eutectic alloys?????

Werner Engelmaier

Thu, 9 Aug 2001 22:02:21 EDT

Re: [LF] Eutectic alloys?????

Werner Engelmaier

Wed, 1 Aug 2001 16:17:42 EDT

Whittaker, Dewey E. (AZ75)

Re: Just a few Questions

Whittaker, Dewey E. (AZ75)

Mon, 30 Jul 2001 08:33:16 -0700

Re: THERMOUNT PWB

Whittaker, Dewey E. (AZ75)

Mon, 15 Oct 2001 09:07:51 -0700

Will Cabrera

Leaky Capacitors

Will Cabrera

Thu, 4 Oct 2001 16:08:32 -0500

William Brown

Re: Laser trimming of resistors

William Brown

Fri, 26 Oct 2001 14:46:12 -0400

William Raymond

Hot and cold cycle on BGA's at test and repair...

William Raymond

Mon, 8 Oct 2001 07:44:18 -0500

William Sullivan

bottom side heat sink attachment

William Sullivan

Wed, 10 Oct 2001 10:48:00 -0700

complainer wave guides

William Sullivan

Mon, 15 Oct 2001 09:13:44 -0700

padsPCB question

William Sullivan

Mon, 15 Oct 2001 09:01:36 -0700

Re: SNEC Meeting

William Sullivan

Mon, 15 Oct 2001 12:54:48 -0700

Winslow, Hal

Re: HASL Plating Thickness

Winslow, Hal

Thu, 18 Oct 2001 08:30:51 -0400

Woelfel, Tim

Re: Board layout service

Woelfel, Tim

Wed, 1 Aug 2001 09:40:21 -0500

Re: Thermally conductive adhesive

Woelfel, Tim

Tue, 16 Oct 2001 07:32:01 -0500

Young Hwan Ju

Expiration date for soft gold surface plating

Young Hwan Ju

Fri, 10 Aug 2001 12:01:09 +0900

Yu-Hung Shiau

Defintion of "discoloration" on PCB gold fingers

Yu-Hung Shiau

Wed, 3 Oct 2001 18:35:58 -0500

PCB baking conditions

Yu-Hung Shiau

Wed, 3 Oct 2001 18:24:50 -0500

Yuen, Mike

BGA corner pad

Yuen, Mike

Wed, 17 Oct 2001 09:59:58 -0500

Copper migration

Yuen, Mike

Fri, 5 Oct 2001 11:14:09 -0500

Re: Copper migration

Yuen, Mike

Sun, 7 Oct 2001 13:33:50 -0500

Yves.Dupuis

Re: SPC @ WAVE SOLDER

Yves.Dupuis

Fri, 5 Oct 2001 08:37:18 -0400

Re: SPC @ WAVE SOLDER

Yves.Dupuis

Fri, 5 Oct 2001 14:00:48 -0400

ATOM RSS1 RSS2

LISTSERV.IPC.ORG