Dave
Excuse me, a water spray without VOCs (and all flammable liquids are
VOCs, by definition) is a fire hazard????????????????????????? Wow, I'd
better put sprinklers in over my garden irrigation system, oh! but what
liquid can I use in the sprinklers?
Brian
David Fish wrote:
>
> Hi Graham.
>
> Not commenting on the newer formulations that Graham references, the over
> spray of most water based, VOC free coatings is a fire hazard, according to
> our insurance and fire inspectors.
>
> Dave Fish
> ----- Original Message -----
> From: "Graham Naisbitt" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, October 04, 2001 5:00 AM
> Subject: Re: [TN] Setting up conformal coating process
>
> > Peter and others
> >
> > You should be aware that there are new developments in coating materials
> > that render your set-up much simpler and less expensive. These are water
> > based coatings, VOC free and MIL-Spec qualified. They are repairable and
> > fast to cure - <30 minutes at room temp.
> >
> > Dave Fish (hello Dave) gave you the correct info regarding various issues
> > when dealing with conventional solvent based coatings. However, with these
> > new water based materials: there are no special fire precautions - the
> fume
> > extraction isn't mandatory - your insurance costs will diminish,
> > significantly - the health & safety of your operators is improved.
> >
> > If you or anyone else wants more details contact me of-line.
> >
> > Regards, Graham Naisbitt
> >
> > [log in to unmask]
> > www.concoat.co.uk <http://www.concoat.co.uk>
> >
> > For instant access to Product Data Sheets register on the Tech-Shot area
> of
> > http:// www.concoat.co.uk <http://www.concoat.co.uk>
> >
> > Concoat Limited
> > Alasan House, Albany Park
> > CAMBERLEY GU16 7PH UK
> > Phone: +44 (0)1276 691100
> > Fax: +44 (0)1276 691227
> > Mobile: +44 (0)79 6858 2121
> >
> > Attention: This message is for the named person's use only. It may contain
> > confidential, proprietary or legally privileged information. No
> > confidentiality or privilege is waived or lost by any mistransmission. If
> > you receive this message in error, please immediately delete it and all
> > copies of it from your system, destroy any hard copies of it securely and
> > notify the sender. You must not, directly or indirectly, use, disclose,
> > distribute, print, or copy any part of this message if you are not the
> > intended recipient. Concoat Ltd and any of its subsidiaries each reserve
> the
> > right to monitor all e-mail communications through its networks.
> >
> > Any views expressed in this message are those of the individual sender,
> > except where the message states otherwise and the sender is authorised to
> > state them to be the views of Concoat Ltd or one of its subsidiaries.
> >
> > Although this message has been scanned for known viruses and inappropriate
> > content, we recommend that recipients employ appropriate measures on their
> > systems to intercept any such material.
> >
> > Thank You - Concoat Ltd
> >
> >
> >
> > -----Original Message-----
> > From: TechNet [mailto:[log in to unmask]]On Behalf Of peter lee
> > Sent: Friday, September 28, 2001 04:57
> > To: [log in to unmask]
> > Subject: [TN] Setting up conformal coating process
> >
> >
> > Hello,
> >
> > I like to hear your thoughts or experiences on setting
> > up a safe and efficient (in particular exhaust,
> > floorinconformal coating process g, ESD concerns,
> > layout, material storage). Please comment on anything
> > you feel critical to process control and success.
> >
> >
> > Peter
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Listen to your Yahoo! Mail messages from any phone.
> > http://phone.yahoo.com
> >
> > --------------------------------------------------------------------------
> --
> > -----
> > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> > To unsubscribe, send a message to [log in to unmask] with following text in
> > the BODY (NOT the subject field): SIGNOFF Technet
> > To temporarily halt delivery of Technet send the following message: SET
> > Technet NOMAIL
> > Search previous postings at: www.ipc.org > On-Line Resources & Databases >
> > E-mail Archives
> > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> > ext.5315
> > --------------------------------------------------------------------------
> --
> > -----
> >
> > --------------------------------------------------------------------------
> -------
> > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> > To unsubscribe, send a message to [log in to unmask] with following text in
> > the BODY (NOT the subject field): SIGNOFF Technet
> > To temporarily halt delivery of Technet send the following message: SET
> Technet NOMAIL
> > Search previous postings at: www.ipc.org > On-Line Resources & Databases >
> E-mail Archives
> > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
> > --------------------------------------------------------------------------
> -------
> >
>
> ---------------------------------------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
> ---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
