Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 10 Oct 2001 12:56:40 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We just installed a rubber ESD floor which works great. The installer did
recommend that the old tiles be removed, though. It costs about $6.50/sq.
ft. for removal of the old tiles and installing the new.
Jim Marsico
Senior Engineer
Production Engineering
EDO Electronics Systems Group
[log in to unmask] <mailto:[log in to unmask]>
631-595-5879
-----Original Message-----
From: Howard Watson [SMTP:[log in to unmask]]
Sent: Wednesday, October 10, 2001 10:55 AM
To: [log in to unmask]
Subject: [TN] ESD flooring ideas.
Dear TechNetters,
Our PCB assembly area is being consolidated to another building, and
I have the opportunity to request some type of ESD floor coating over an
existing non-ESD tile flooring. What are your opinions on the best, most
reliable, and of course cheapest, method of ESD flooring? I am thinking
that removing the existing tile would not be a cost effective alternative.
We are moving out of a facility that had no ESD flooring, so improvements
should be easy to achieve. Thanks for the assistance.
Best regards,
Howard Watson
Manufacturing Engineer
AMETEK/Dixson
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|