TECHNET Archives

October 2005

TechNet@IPC.ORG
Options: Hide Table of Contents

Şefika ÖZKAL (7 Messages)
<> (6 Messages)
Ahne Oosterhof (3 Messages)
Alcorn, Brent (2 Messages)
Aleks Lozinsky (1 Message)
Alexandra Curtis (1 Message)
Andy Price (1 Message)
Anil Kher (6 Messages)
Anslow, Phillip (2 Messages)
Arnaud GRIVON (2 Messages)
Art Glass (1 Message)
Balasubramanian Krishnan (1 Message)
Barmuta, Mike (12 Messages)
Baski Devre (1 Message)
Ben Kane (1 Message)
Bev Christian (7 Messages)
Biard, Gloria (1 Message)
Bissonnette, Jean-Francois (3 Messages)
Black, Paul (1 Message)
Blair K. Hogg (7 Messages)
Blomberg, Rainer (FL51) (9 Messages)
Bloomquist, Ken (9 Messages)
Bob Arciolla (2 Messages)
Bob Metcalf (4 Messages)
bob wettermann (1 Message)
Bremer, Gary (2 Messages)
Brian Ellis (15 Messages)
Brian Guidi (1 Message)
Brooks,Bill (17 Messages)
Bruce D Stilmack (1 Message)
Brummer Chuck (2 Messages)
Charles Caswell (8 Messages)
Cheryl Johnson (1 Message)
Chris Ball (11 Messages)
Clayton Gardner (1 Message)
Colin McVean (4 Messages)
COOKE, ROBERT W. (JSC-NX) (WGI) (1 Message)
Craig Cullum (4 Messages)
Crepeau, Phil (Space Technology) (4 Messages)
Creswick, Steven (3 Messages)
Croslin, Robert (4 Messages)
Dacia Schoolfield (1 Message)
Dale Ritzen (1 Message)
Darrel Therriault (4 Messages)
Dave Dixon (1 Message)
Dave Seymour (2 Messages)
Dave Simonik (4 Messages)
David D. Hillman (4 Messages)
David Fish (2 Messages)
David Greig (2 Messages)
David Tremmel (9 Messages)
Deac Descoteaux (1 Message)
Dehoyos, Ramon (36 Messages)
Dennis Fritz (2 Messages)
Donald Kyle (1 Message)
Douglas O. Pauls (7 Messages)
DUTTON Phil (1 Message)
Dwight Mattix (10 Messages)
Eddie Rocha (4 Messages)
Edward Szpruch (3 Messages)
ekalgren (1 Message)
Eric CHRISTISON (2 Messages)
Fatih ISIK (1 Message)
Fineline Circuits, Inc (5 Messages)
Fox, Ian (1 Message)
Frank Kimmey (7 Messages)
Franklin Asbell (51 Messages)
Franklin D Asbell (7 Messages)
Frederick Miller (3 Messages)
Gabriela Bogdan (5 Messages)
Genny Gibbard (4 Messages)
Geoff Layhe of Lamar Group (3 Messages)
George Milad (1 Message)
George Patrick (6 Messages)
Gerard O'Brien (9 Messages)
Glenn Pelkey (1 Message)
Graham Naisbitt (3 Messages)
Green, Mike (1 Message)
Guenter Grossmann (1 Message)
Gus Abu-Hamdeh (1 Message)
Guy Ramsey (5 Messages)
Gwen Jader (3 Messages)
Hasan Zamir (2 Messages)
Ingemar Hernefjord (KC/EMW) (6 Messages)
Ingemar Hernefjord (31 Messages)
Ivanoe Pedruzzi (2 Messages)
Jack C. Olson (4 Messages)
Jack Crawford (2 Messages)
James Hofer (5 Messages)
JaMi Smith (1 Message)
Jason Gregory (15 Messages)
Jason (1 Message)
Jeff Seeger (1 Message)
Jeffrey Bush (24 Messages)
Jerry Dengler (5 Messages)
Jihua Du (1 Message)
Jim Clark (1 Message)
Jim Henderson (2 Messages)
Jim Jablonsky (1 Message)
Joe Fjelstad (4 Messages)
Joe Hughes (1 Message)
Joe Russeau (10 Messages)
Joel Mearig (12 Messages)
John Bauer (2 Messages)
John Burke (26 Messages)
John Maxwell (3 Messages)
John Parsons (4 Messages)
Joseph H. Smith (1 Message)
joseph H.smith (1 Message)
Joyce Koo (16 Messages)
jrm (1 Message)
Judy Brown (2 Messages)
Kane, Joseph E (US SSA) (3 Messages)
Karl Sauter (2 Messages)
Kathy Kuhlow (1 Message)
Kathy (2 Messages)
Kaye Clayo (1 Message)
Kelly Morris (6 Messages)
Ken (1 Message)
Kerry McMullen (5 Messages)
Kevin Glidden (8 Messages)
Kevin (1 Message)
Kotecki, George (2 Messages)
Lance Mayes (2 Messages)
Larry Koens (1 Message)
Larson, Kevin (2 Messages)
Lawrence Russell (1 Message)
Lee parker (13 Messages)
Leo Higgins (12 Messages)
LeVesque, Andy (2 Messages)
Linda Langley (2 Messages)
Linda.Li (1 Message)
luis gallegos (1 Message)
Macconnell, Richard (ES) (1 Message)
Macko, Joe @ IEC (1 Message)
Marcel van den Berk (3 Messages)
Matthias Mansfeld (1 Message)
Mattson, Jeffrey (1 Message)
MattyK (2 Messages)
Mcmaster, Michael (4 Messages)
Mel Parrish (2 Messages)
Michael Forrester (1 Message)
Michael Kuczynski (3 Messages)
Michael Sewell (1 Message)
Michelle Michelotti (1 Message)
Mike Buetow (4 Messages)
Mike Fenner (1 Message)
morand, garry (1 Message)
Mumtaz Bora (2 Messages)
Neil Diamond (1 Message)
No Name (1 Message)
Ofer Cohen (6 Messages)
Paul Edwards (3 Messages)
Pete Lymn (2 Messages)
Pete menuez (1 Message)
Peter Swanson (1 Message)
Phil Nutting (21 Messages)
Phil Zarrow (1 Message)
Phillip Bavaro (8 Messages)
Prakash Sowndappan (2 Messages)
prasad godavarti (2 Messages)
R Sedlak (14 Messages)
Randy Bock Sr. (5 Messages)
Ray, Carl (GE Infrastructure) (1 Message)
Reuven ROKAH (3 Messages)
RICHARD FUDALEWSKI (3 Messages)
Richard Kraszewski (2 Messages)
Rick Pfeiffer (1 Message)
Roach, David (5 Messages)
Robert Coburn (1 Message)
Roger Battles (2 Messages)
Roger Mouton (1 Message)
Roger Stoops (5 Messages)
Roger Tingler (1 Message)
Roland Dollinger (1 Message)
Roland Jaquet (1 Message)
Russell Burdick (2 Messages)
Ryan Grant (2 Messages)
Schaefer, Chris (3 Messages)
shoukai zhang (1 Message)
Smith, Richard (1 Message)
Sri Maganti (1 Message)
Stadem, Richard (51 Messages)
stephen gregory (3 Messages)
Stephen R Gregory (15 Messages)
Steve Gregory (22 Messages)
Steve Hodge (10 Messages)
Steve Kelly (1 Message)
Susan C. James (1 Message)
Susan Mansilla (4 Messages)
Syed Sajid Ahmad (1 Message)
TDK (3 Messages)
Ted Edwards (1 Message)
Ted Tontis (1 Message)
Tempea, Ioan (4 Messages)
Terry Halsey (1 Message)
Terry Quinn (1 Message)
Tom Braswell (1 Message)
Tom Burek (3 Messages)
Tom Oliver (2 Messages)
Valerie St.Cyr (9 Messages)
Vargas, Stephen M (1 Message)
Victor G. Hernandez (3 Messages)
Vladimir Igoshev (5 Messages)
Wee Mei (4 Messages)
Wenger, George M. (10 Messages)
Werner Engelmaier (50 Messages)
Whittaker, Dewey (AZ75) (30 Messages)
Zilber Gil (1 Message)
Zweigart, Siegmund (2 Messages)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender Şefika ÖZKAL
mil-p-55110 d/e
Şefika ÖZKAL
Fri, 7 Oct 2005 11:12:59 +0300
Re: mil-p-55110 d/e
Şefika ÖZKAL
Fri, 7 Oct 2005 16:13:21 +0300
Re: mil-p-55110 d/e
Şefika ÖZKAL
Mon, 10 Oct 2005 09:23:12 +0300
Re: mil-p-55110 d/e
Şefika ÖZKAL
Tue, 11 Oct 2005 07:45:17 +0300
Re: mil-p-55110 d/e
Şefika ÖZKAL
Tue, 11 Oct 2005 07:54:36 +0300
MIL-PRT-31032 vs IPC-6012
Şefika ÖZKAL
Thu, 6 Oct 2005 15:58:50 +0300
Recall: [TN] mil-p-55110 d/e
Şefika ÖZKAL
Tue, 11 Oct 2005 07:53:23 +0300
New Sender <>
Alan Kreplick/Bos/Teradyne is out of the office.
<>
Fri, 28 Oct 2005 17:21:40 -0400
Re: Direct Immersion Gold
<>
Wed, 12 Oct 2005 11:47:46 EDT
Re: LEAD FREE PART IN SNPB PROCESS
<>
Fri, 28 Oct 2005 22:55:04 EDT
Re: Microsectioning equipment...
<>
Tue, 4 Oct 2005 15:43:55 -0400
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
<>
Wed, 26 Oct 2005 12:36:29 EDT
Shower head
<>
Thu, 20 Oct 2005 17:16:47 +0800
New Sender Ahne Oosterhof
Re: New Topic
Ahne Oosterhof
Wed, 5 Oct 2005 10:46:38 -0700
Re: SV: [TN] Voids in BGAs, again
Ahne Oosterhof
Tue, 18 Oct 2005 12:42:56 -0700
Re: Voids in BGAs, again
Ahne Oosterhof
Tue, 18 Oct 2005 07:41:03 -0700
New Sender Alcorn, Brent
Re: New IPC email forum
Alcorn, Brent
Wed, 5 Oct 2005 11:14:59 -0400
Re: Steve's award
Alcorn, Brent
Tue, 25 Oct 2005 09:58:23 -0400
New Sender Aleks Lozinsky
Re: More Electrolytic Tin Plating
Aleks Lozinsky
Tue, 18 Oct 2005 08:24:27 -0400
New Sender Alexandra Curtis
Register Now for these In-House Workshops - Get a Hands-on Experience
Alexandra Curtis
Tue, 11 Oct 2005 16:06:04 -0500
New Sender Andy Price
Re: Gold Plating Peeling...
Andy Price
Fri, 28 Oct 2005 13:14:05 -0400
New Sender Anil Kher
Direct Immersion Gold - why Nickel in ENIG
Anil Kher
Fri, 14 Oct 2005 10:28:33 +0530
Re: Fabricators and information passage
Anil Kher
Sat, 8 Oct 2005 10:11:07 +0530
Re: Fabricators and information passage
Anil Kher
Wed, 12 Oct 2005 13:11:27 +0530
Re: Gold Plating Peeling... Peel check again
Anil Kher
Sun, 30 Oct 2005 18:59:40 +0530
Steve's award
Anil Kher
Wed, 26 Oct 2005 11:38:43 +0530
Re: wire bondable immersion gold
Anil Kher
Wed, 19 Oct 2005 12:57:35 +0530
New Sender Anslow, Phillip
Ag Polymer On Flex Circuits
Anslow, Phillip
Wed, 26 Oct 2005 14:50:55 +0100
Re: TechNet working?
Anslow, Phillip
Tue, 25 Oct 2005 10:00:42 +0100
New Sender Arnaud GRIVON
Copper Ductility Characterization
Arnaud GRIVON
Tue, 4 Oct 2005 13:50:16 +0200
Re: Copper Ductility Characterization
Arnaud GRIVON
Tue, 4 Oct 2005 17:21:07 +0200
New Sender Art Glass
Re: PCB Score Depth
Art Glass
Thu, 6 Oct 2005 08:48:14 -0500
New Sender Balasubramanian Krishnan
K Balasubramanian is in an official tour.
Balasubramanian Krishnan
Wed, 5 Oct 2005 04:00:52 +0530
New Sender Barmuta, Mike
Re: (2) [TN] Electrolytic Tin Plating
Barmuta, Mike
Fri, 14 Oct 2005 13:00:06 -0700
Re: (2) [TN] Electrolytic Tin Plating
Barmuta, Mike
Mon, 17 Oct 2005 08:12:12 -0700
Re: (NTC)Removing oxide from silver flakes.
Barmuta, Mike
Fri, 21 Oct 2005 14:28:12 -0700
Re: Electrolytic Tin Plating
Barmuta, Mike
Fri, 14 Oct 2005 11:15:00 -0700
Re: Gold Plating Peeling...
Barmuta, Mike
Fri, 28 Oct 2005 08:58:08 -0700
Re: Gold Plating Peeling...
Barmuta, Mike
Mon, 31 Oct 2005 07:35:14 -0800
Re: LEAD FREE PART IN SNPB PROCESS
Barmuta, Mike
Fri, 28 Oct 2005 08:43:11 -0700
Re: LEAD FREE PART IN SNPB PROCESS
Barmuta, Mike
Fri, 28 Oct 2005 12:57:03 -0700
Re: LEAD FREE PART IN SNPB PROCESS
Barmuta, Mike
Fri, 28 Oct 2005 15:39:42 -0700
Re: New IPC email forum
Barmuta, Mike
Wed, 5 Oct 2005 08:26:32 -0700
Re: New Topic
Barmuta, Mike
Wed, 5 Oct 2005 09:34:37 -0700
Re: Removing oxide from silver flakes.
Barmuta, Mike
Fri, 21 Oct 2005 13:50:19 -0700
New Sender Baski Devre
Re: New IPC email forum
Baski Devre
Thu, 6 Oct 2005 08:13:24 +0300
New Sender Ben Kane
Fans and Air Movers
Ben Kane
Mon, 17 Oct 2005 19:24:30 +0100
New Sender Bev Christian
Re: <List>Re: [TN] New Old Topic
Bev Christian
Thu, 6 Oct 2005 17:46:02 -0400
Re: Halloween NTC
Bev Christian
Mon, 31 Oct 2005 15:44:24 -0500
Re: LEAD FREE PART IN SNPB PROCESS
Bev Christian
Sat, 29 Oct 2005 15:13:17 -0400
Re: Microsectioning equipment...NTC
Bev Christian
Tue, 4 Oct 2005 10:39:40 -0400
Re: New IPC email forum
Bev Christian
Thu, 6 Oct 2005 10:53:05 -0400
Re: New Topic
Bev Christian
Thu, 6 Oct 2005 08:22:05 -0400
Re: NTC:
Bev Christian
Thu, 13 Oct 2005 11:17:15 -0400
New Sender Biard, Gloria
Re: choosing solder vendor
Biard, Gloria
Tue, 18 Oct 2005 08:21:47 -0500
New Sender Bissonnette, Jean-Francois
Solder Sleeves
Bissonnette, Jean-Francois
Wed, 26 Oct 2005 12:30:12 -0400
Re: Solder Sleeves
Bissonnette, Jean-Francois
Wed, 26 Oct 2005 16:27:15 -0400
Re: Solder Sleeves
Bissonnette, Jean-Francois
Wed, 26 Oct 2005 16:38:56 -0400
New Sender Black, Paul
Re: Steve's award
Black, Paul
Tue, 25 Oct 2005 08:58:56 -0400
New Sender Blair K. Hogg
Re: Microsection
Blair K. Hogg
Fri, 7 Oct 2005 05:32:42 -0700
Re: Microsection
Blair K. Hogg
Fri, 7 Oct 2005 08:20:15 -0700
Re: mil-p-55110 d/e
Blair K. Hogg
Fri, 7 Oct 2005 05:29:41 -0700
Re: Mixing Fluxes: Water Sol and Rosin - NTC
Blair K. Hogg
Tue, 4 Oct 2005 11:27:09 -0700
Re: PWB challenges
Blair K. Hogg
Fri, 14 Oct 2005 05:43:03 -0700
Re: [NTC] Friday in paradise
Blair K. Hogg
Fri, 14 Oct 2005 12:47:42 -0700
Re: [NTC] Friday in paradise
Blair K. Hogg
Fri, 14 Oct 2005 13:03:16 -0700
New Sender Blomberg, Rainer (FL51)
Re: Assembly Documentation Question
Blomberg, Rainer (FL51)
Fri, 7 Oct 2005 11:46:50 -0700
Re: Fabricators
Blomberg, Rainer (FL51)
Tue, 11 Oct 2005 08:35:06 -0700
Re: Fabricators and information passage
Blomberg, Rainer (FL51)
Fri, 7 Oct 2005 14:04:02 -0700
Re: Hand Soldering Long Gold Pins
Blomberg, Rainer (FL51)
Tue, 4 Oct 2005 09:43:21 -0700
Re: Mixing Fluxes: Water Sol and Rosin
Blomberg, Rainer (FL51)
Mon, 3 Oct 2005 13:01:09 -0700
Re: New IPC email forum
Blomberg, Rainer (FL51)
Wed, 5 Oct 2005 08:41:19 -0700
Re: New Old Topic
Blomberg, Rainer (FL51)
Thu, 6 Oct 2005 09:21:44 -0700
Re: New Topic
Blomberg, Rainer (FL51)
Wed, 5 Oct 2005 09:35:05 -0700
Re: Solder Protrusions
Blomberg, Rainer (FL51)
Thu, 6 Oct 2005 09:47:11 -0700
New Sender Bloomquist, Ken
Re: Component failure analysis labs
Bloomquist, Ken
Thu, 27 Oct 2005 12:24:10 -0700
Re: Levity and Whit
Bloomquist, Ken
Thu, 13 Oct 2005 10:28:14 -0700
Re: Mixing Fluxes: Water Sol and Rosin
Bloomquist, Ken
Tue, 4 Oct 2005 06:38:21 -0700
Re: New IPC email forum
Bloomquist, Ken
Wed, 5 Oct 2005 08:40:56 -0700
Re: RoHS Process Compliant boards
Bloomquist, Ken
Tue, 11 Oct 2005 10:53:24 -0700
Re: Selective conformal coating machine
Bloomquist, Ken
Thu, 27 Oct 2005 10:31:55 -0700
Re: Solder Stations
Bloomquist, Ken
Mon, 17 Oct 2005 06:13:07 -0700
Re: Solder Stations
Bloomquist, Ken
Mon, 17 Oct 2005 08:56:08 -0700
Re: Urgent! Acrylic coating
Bloomquist, Ken
Thu, 27 Oct 2005 09:17:47 -0700
New Sender Bob Arciolla
Re: Friday in paradise
Bob Arciolla
Fri, 14 Oct 2005 14:31:58 -0400
Re: Solder Stations
Bob Arciolla
Fri, 14 Oct 2005 14:29:51 -0400
New Sender Bob Metcalf
Re: New IPC email forum
Bob Metcalf
Wed, 5 Oct 2005 09:48:05 -0700
Re: New Old Topic
Bob Metcalf
Thu, 6 Oct 2005 10:15:18 -0700
Re: New Topic
Bob Metcalf
Wed, 5 Oct 2005 09:52:29 -0700
Re: New Topic
Bob Metcalf
Thu, 6 Oct 2005 09:49:25 -0700
New Sender bob wettermann
Re: Gold Plating Peeling...
bob wettermann
Sat, 29 Oct 2005 04:45:08 -0700
New Sender Bremer, Gary
Re: New IPC email forum
Bremer, Gary
Wed, 5 Oct 2005 08:08:26 -0700
Re: New IPC email forum
Bremer, Gary
Wed, 5 Oct 2005 08:54:50 -0700
New Sender Brian Ellis
Re: (NTC) ENIG and brittleness
Brian Ellis
Fri, 28 Oct 2005 09:54:55 +0300
Re: Male female dies
Brian Ellis
Tue, 25 Oct 2005 13:11:53 +0300
Re: Microscopes
Brian Ellis
Thu, 6 Oct 2005 10:03:31 +0300
Re: Mixing Fluxes: Water Sol and Rosin
Brian Ellis
Tue, 4 Oct 2005 14:51:41 +0300
Re: Mixing Fluxes: Water Sol and Rosin
Brian Ellis
Tue, 4 Oct 2005 18:18:57 +0300
Re: New IPC email forum
Brian Ellis
Thu, 6 Oct 2005 10:34:53 +0300
Re: New Old Topic
Brian Ellis
Mon, 10 Oct 2005 16:20:37 +0300
Re: NTC:
Brian Ellis
Fri, 14 Oct 2005 14:58:23 +0300
Re: NTC:Friday
Brian Ellis
Fri, 21 Oct 2005 18:08:13 +0300
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Brian Ellis
Wed, 26 Oct 2005 18:57:59 +0300
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Brian Ellis
Thu, 27 Oct 2005 13:00:35 +0300
Re: Solder Stations
Brian Ellis
Tue, 18 Oct 2005 10:11:34 +0300
Re: Solder Stations
Brian Ellis
Tue, 18 Oct 2005 10:14:16 +0300
Re: SV: [TN] NTC: Male female dies
Brian Ellis
Tue, 25 Oct 2005 16:49:06 +0300
Re: [NTC] Friday in paradise
Brian Ellis
Mon, 17 Oct 2005 18:16:03 +0300
New Sender Brian Guidi
Brian L Guidi is out of the office.
Brian Guidi
Fri, 7 Oct 2005 04:00:52 PDT
New Sender Brooks,Bill
2006 - Year of the PCB Designer
Brooks,Bill
Tue, 25 Oct 2005 10:28:47 -0700
Re: 2006 - Year of the PCB Designer
Brooks,Bill
Tue, 25 Oct 2005 14:34:54 -0700
Re: Fabricators and information passage
Brooks,Bill
Thu, 6 Oct 2005 16:05:50 -0700
Re: Haloween
Brooks,Bill
Mon, 31 Oct 2005 13:05:42 -0800
Re: Highvoltage testvoltage
Brooks,Bill
Thu, 6 Oct 2005 09:02:03 -0700
Re: Highvoltage testvoltage
Brooks,Bill
Thu, 6 Oct 2005 10:21:40 -0700
Re: Highvoltage testvoltage
Brooks,Bill
Thu, 6 Oct 2005 14:12:27 -0700
Re: New IPC email forum
Brooks,Bill
Wed, 5 Oct 2005 10:48:51 -0700
Re: New IPC email forum
Brooks,Bill
Mon, 10 Oct 2005 15:09:58 -0700
Re: RoHS - scary tin whiskers
Brooks,Bill
Tue, 11 Oct 2005 11:23:57 -0700
Re: RoHS Pressfit Connector
Brooks,Bill
Tue, 4 Oct 2005 10:31:55 -0700
Re: RoHS Process Compliant boards
Brooks,Bill
Tue, 11 Oct 2005 10:10:34 -0700
SMT solderability evaluation PCB???
Brooks,Bill
Thu, 27 Oct 2005 11:49:48 -0700
Re: Solder Stations
Brooks,Bill
Mon, 17 Oct 2005 12:13:02 -0700
Re: [DC] 2006 - Year of the PCB Designer
Brooks,Bill
Tue, 25 Oct 2005 11:37:09 -0700
Re: [NTC] Friday in paradise
Brooks,Bill
Fri, 14 Oct 2005 13:12:51 -0700
Re: [NTC] Friday in paradise
Brooks,Bill
Fri, 14 Oct 2005 13:50:36 -0700
New Sender Bruce D Stilmack
Re: Solder Sleeves
Bruce D Stilmack
Wed, 26 Oct 2005 16:16:03 -0400
New Sender Brummer Chuck
Re: Copper Ductility Characterization
Brummer Chuck
Mon, 10 Oct 2005 12:43:10 -0700
Re: Delamination at Thermal Via area?
Brummer Chuck
Wed, 19 Oct 2005 11:46:14 -0700
New Sender Charles Caswell
Re: Keeping in the spirit of things
Charles Caswell
Wed, 5 Oct 2005 10:28:32 -0500
Re: Levity and Whit
Charles Caswell
Thu, 13 Oct 2005 14:31:40 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Charles Caswell
Wed, 5 Oct 2005 10:24:25 -0500
Re: NTC:
Charles Caswell
Thu, 13 Oct 2005 15:20:20 -0500
Re: NTC:
Charles Caswell
Fri, 14 Oct 2005 07:27:43 -0500
Re: RoHS - scary tin whiskers
Charles Caswell
Tue, 11 Oct 2005 13:40:12 -0500
Re: SV: [TN] Urgent! Acrylic coating
Charles Caswell
Thu, 27 Oct 2005 15:35:43 -0500
Re: Urgent! Acrylic coating
Charles Caswell
Thu, 27 Oct 2005 09:54:16 -0500
New Sender Cheryl Johnson
Re: New IPC email forum
Cheryl Johnson
Wed, 5 Oct 2005 10:39:44 -0600
New Sender Chris Ball
Congrats Steve!
Chris Ball
Tue, 25 Oct 2005 10:19:39 -0400
Re: Halloween NTC
Chris Ball
Mon, 31 Oct 2005 15:55:48 -0500
Re: New IPC email forum
Chris Ball
Wed, 5 Oct 2005 11:51:49 -0400
Re: New IPC email forum
Chris Ball
Thu, 6 Oct 2005 08:17:18 -0400
Re: New Topic
Chris Ball
Wed, 5 Oct 2005 14:09:31 -0400
Re: NTC-Attracting Fabricators
Chris Ball
Thu, 6 Oct 2005 14:32:51 -0400
Re: SV: [TN] [DC] 2006 - Year of the PCB Designer
Chris Ball
Wed, 26 Oct 2005 09:39:46 -0400
Re: SV: [TN] [DC] 2006 - Year of the PCB Designer
Chris Ball
Wed, 26 Oct 2005 10:06:03 -0400
Re: TechNet working?
Chris Ball
Mon, 24 Oct 2005 13:30:25 -0400
Re: [DC] 2006 - Year of the PCB Designer
Chris Ball
Tue, 25 Oct 2005 13:34:07 -0400
Re: [DC] 2006 - Year of the PCB Designer
Chris Ball
Tue, 25 Oct 2005 14:43:53 -0400
New Sender Clayton Gardner
IPC7351 Questions
Clayton Gardner
Mon, 3 Oct 2005 20:04:07 -0500
New Sender Colin McVean
Aluminium substrate
Colin McVean
Fri, 14 Oct 2005 09:52:25 +0100
Re: Electrolytic Tin Plating
Colin McVean
Fri, 14 Oct 2005 15:33:56 +0100
Re: New Topic
Colin McVean
Wed, 5 Oct 2005 17:11:12 +0100
SNC and SAC comparisons
Colin McVean
Mon, 17 Oct 2005 15:37:00 +0100
New Sender COOKE, ROBERT W. (JSC-NX) (WGI)
Re: use fo high halide flux on avionics: kester 331 flux
COOKE, ROBERT W. (JSC-NX) (WGI)
Mon, 3 Oct 2005 09:32:15 -0500
New Sender Craig Cullum
Re: New IPC email forum
Craig Cullum
Wed, 5 Oct 2005 11:08:30 -0500
Re: New IPC email forum
Craig Cullum
Wed, 5 Oct 2005 11:15:46 -0500
Re: New IPC email forum
Craig Cullum
Thu, 6 Oct 2005 08:15:16 -0500
Re: New IPC email forum
Craig Cullum
Tue, 11 Oct 2005 10:34:18 -0500
New Sender Crepeau, Phil (Space Technology)
Re: ENIG and brittleness
Crepeau, Phil (Space Technology)
Thu, 27 Oct 2005 07:44:58 -0700
Re: Solder Sleeves
Crepeau, Phil (Space Technology)
Wed, 26 Oct 2005 13:19:06 -0700
Re: Stycast E-151-3
Crepeau, Phil (Space Technology)
Thu, 27 Oct 2005 16:37:55 -0700
Re: Urgent! Acrylic coating
Crepeau, Phil (Space Technology)
Thu, 27 Oct 2005 07:43:13 -0700
New Sender Creswick, Steven
Re: SV: [TN] SV: wire bondable immersion gold
Creswick, Steven
Wed, 19 Oct 2005 08:37:21 -0400
Re: wire bonding
Creswick, Steven
Wed, 12 Oct 2005 06:40:31 -0400
Re: wire bonding - ENIG and ENEPIG
Creswick, Steven
Wed, 12 Oct 2005 06:25:18 -0400
New Sender Croslin, Robert
Re: Assembly Documentation Question
Croslin, Robert
Fri, 7 Oct 2005 14:06:56 -0400
Re: Assembly Documentation Question
Croslin, Robert
Mon, 10 Oct 2005 13:38:31 -0400
Re: Assembly Documentation Question
Croslin, Robert
Tue, 11 Oct 2005 09:36:35 -0400
Re: New IPC email forum
Croslin, Robert
Wed, 5 Oct 2005 11:19:09 -0400
New Sender Dacia Schoolfield
BGA Reballing Services
Dacia Schoolfield
Fri, 28 Oct 2005 13:50:24 -0500
New Sender Dale Ritzen
Re: Microscopes
Dale Ritzen
Wed, 5 Oct 2005 13:16:58 -0500
New Sender Darrel Therriault
Fabricators
Darrel Therriault
Mon, 10 Oct 2005 08:48:41 -0700
Re: New IPC email forum
Darrel Therriault
Wed, 5 Oct 2005 10:45:01 -0700
Revisions
Darrel Therriault
Mon, 10 Oct 2005 11:28:38 -0700
Re: Solder Stations
Darrel Therriault
Fri, 14 Oct 2005 15:00:15 -0700
New Sender Dave Dixon
Re: MIL-P-18177
Dave Dixon
Fri, 14 Oct 2005 10:05:27 -0500
New Sender Dave Seymour
Class 2 Vs 3
Dave Seymour
Fri, 14 Oct 2005 13:56:32 -0400
Re: Delamination at Thermal Via area?
Dave Seymour
Wed, 19 Oct 2005 11:52:39 -0400
New Sender Dave Simonik
Re: Delamination at Thermal Via area?
Dave Simonik
Thu, 20 Oct 2005 07:36:12 -0400
Re: Fabricators and information passage
Dave Simonik
Fri, 7 Oct 2005 13:11:44 -0400
Re: New IPC email forum
Dave Simonik
Wed, 5 Oct 2005 11:12:29 -0400
Re: New IPC email forum
Dave Simonik
Thu, 6 Oct 2005 09:50:49 -0400
New Sender David D. Hillman
Re: New Old Topic
David D. Hillman
Mon, 10 Oct 2005 08:06:44 -0500
Re: New Old Topic - NTC
David D. Hillman
Mon, 10 Oct 2005 08:34:57 -0500
Re: RoHS Process Compliant boards
David D. Hillman
Tue, 11 Oct 2005 13:28:14 -0500
Re: wire bonding - ENIG and ENEPIG
David D. Hillman
Wed, 12 Oct 2005 06:53:19 -0500
New Sender David Fish
Re: NTC Okay, all you real smart guys.........
David Fish
Mon, 3 Oct 2005 20:59:46 -0400
Re: TechNet working?
David Fish
Tue, 25 Oct 2005 07:47:18 -0400
New Sender David Greig
Re: Help needed / searching for JEDEC standard
David Greig
Thu, 20 Oct 2005 15:19:40 +0100
Via in pad finished flatness
David Greig
Tue, 25 Oct 2005 15:01:49 +0100
New Sender David Tremmel
Re: Dwell Time
David Tremmel
Thu, 6 Oct 2005 14:08:32 -0500
Re: LEAD FREE PART IN SNPB PROCESS
David Tremmel
Fri, 28 Oct 2005 16:48:27 -0500
Microscopes
David Tremmel
Wed, 5 Oct 2005 12:49:35 -0500
Re: Mixing Fluxes: Water Sol and Rosin
David Tremmel
Mon, 3 Oct 2005 12:31:30 -0500
Re: NTC:
David Tremmel
Thu, 13 Oct 2005 10:23:09 -0500
Re: NTC:Friday
David Tremmel
Fri, 21 Oct 2005 10:28:41 -0500
Re: Removing oxide from silver flakes.
David Tremmel
Fri, 21 Oct 2005 15:46:14 -0500
Re: Solder Stations
David Tremmel
Mon, 17 Oct 2005 09:36:55 -0500
Tack force
David Tremmel
Fri, 7 Oct 2005 12:40:51 -0500
New Sender Deac Descoteaux
Re: Haloween
Deac Descoteaux
Mon, 31 Oct 2005 15:35:36 -0500
New Sender Dehoyos, Ramon
Re: <List>Re: [TN] New Old Topic
Dehoyos, Ramon
Fri, 7 Oct 2005 08:31:42 -0400
Re: <List>[TN] wire bonding
Dehoyos, Ramon
Tue, 11 Oct 2005 16:02:11 -0400
Re: FW: bga image
Dehoyos, Ramon
Mon, 3 Oct 2005 09:29:47 -0400
Re: Buss Bar Attachment Method
Dehoyos, Ramon
Mon, 10 Oct 2005 14:07:50 -0400
Re: Dwell Time
Dehoyos, Ramon
Thu, 6 Oct 2005 14:32:13 -0400
Re: Fabricators and information passage
Dehoyos, Ramon
Fri, 7 Oct 2005 09:15:42 -0400
Re: Fabricators and information passage
Dehoyos, Ramon
Mon, 10 Oct 2005 12:44:53 -0400
Re: Haloween
Dehoyos, Ramon
Mon, 31 Oct 2005 15:43:27 -0500
Re: Hand Soldering Long Gold Pins
Dehoyos, Ramon
Tue, 4 Oct 2005 14:41:05 -0400
Hasl
Dehoyos, Ramon
Tue, 11 Oct 2005 12:52:13 -0400
Re: Hasl
Dehoyos, Ramon
Tue, 11 Oct 2005 16:20:44 -0400
Re: Hasl
Dehoyos, Ramon
Wed, 12 Oct 2005 09:05:45 -0400
Re: Hasl
Dehoyos, Ramon
Wed, 12 Oct 2005 09:09:34 -0400
Re: Hasl
Dehoyos, Ramon
Wed, 12 Oct 2005 13:16:02 -0400
Re: Hasl
Dehoyos, Ramon
Wed, 12 Oct 2005 13:40:07 -0400
Re: Hasl
Dehoyos, Ramon
Wed, 12 Oct 2005 16:24:59 -0400
Re: LEAD FREE PART IN SNPB PROCESS
Dehoyos, Ramon
Fri, 28 Oct 2005 15:30:28 -0400
Re: LEAD FREE PART IN SNPB PROCESS
Dehoyos, Ramon
Fri, 28 Oct 2005 15:42:12 -0400
Re: Mixing Fluxes: Water Sol and Rosin
Dehoyos, Ramon
Mon, 3 Oct 2005 14:22:18 -0400
Re: Mixing Fluxes: Water Sol and Rosin
Dehoyos, Ramon
Tue, 4 Oct 2005 08:19:46 -0400
Re: Mixing Fluxes: Water Sol and Rosin
Dehoyos, Ramon
Tue, 4 Oct 2005 11:01:32 -0400
Re: More on Delamination
Dehoyos, Ramon
Thu, 20 Oct 2005 13:38:45 -0400
Re: New IPC email forum
Dehoyos, Ramon
Wed, 5 Oct 2005 14:58:33 -0400
Re: New Old Topic
Dehoyos, Ramon
Thu, 6 Oct 2005 13:19:37 -0400
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Dehoyos, Ramon
Wed, 26 Oct 2005 12:19:12 -0400
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Dehoyos, Ramon
Wed, 26 Oct 2005 13:25:14 -0400
Re: Selective conformal coating machine
Dehoyos, Ramon
Thu, 27 Oct 2005 13:39:45 -0400
Re: Solder Sleeves
Dehoyos, Ramon
Wed, 26 Oct 2005 16:05:52 -0400
Re: Solder Stations
Dehoyos, Ramon
Mon, 17 Oct 2005 10:19:28 -0400
Re: Solder Stations
Dehoyos, Ramon
Mon, 17 Oct 2005 12:31:22 -0400
Re: Steve's award
Dehoyos, Ramon
Tue, 25 Oct 2005 08:28:45 -0400
Re: SV: [TN] BGA failure and assembly repair
Dehoyos, Ramon
Fri, 28 Oct 2005 10:26:13 -0400
Re: Urgent! Acrylic coating
Dehoyos, Ramon
Thu, 27 Oct 2005 10:54:32 -0400
Re: Urgent! Acrylic coating
Dehoyos, Ramon
Fri, 28 Oct 2005 09:27:59 -0400
Re: Voids in BGAs, again
Dehoyos, Ramon
Tue, 18 Oct 2005 09:30:12 -0400
FW: [TN] Hasl
Dehoyos, Ramon
Thu, 13 Oct 2005 12:49:10 -0400
New Sender Dennis Fritz
Re: ENIG and brittleness
Dennis Fritz
Wed, 26 Oct 2005 14:52:48 EDT
Process Effects Handbook (IPC-PE-740) Meeting Tuesday at IPC Works
Dennis Fritz
Mon, 24 Oct 2005 10:25:01 EDT
New Sender Donald Kyle
Re: Via in pad finished flatness
Donald Kyle
Tue, 25 Oct 2005 10:31:17 -0500
New Sender Douglas O. Pauls
Re: Mixing Fluxes: Water Sol and Rosin
Douglas O. Pauls
Mon, 3 Oct 2005 14:49:19 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Douglas O. Pauls
Tue, 4 Oct 2005 08:06:10 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Douglas O. Pauls
Tue, 4 Oct 2005 08:28:45 -0500
Re: NTC:
Douglas O. Pauls
Thu, 13 Oct 2005 10:12:56 -0500
Re: NTC:Friday
Douglas O. Pauls
Fri, 21 Oct 2005 08:59:17 -0500
Re: Solder Stations
Douglas O. Pauls
Mon, 17 Oct 2005 07:31:22 -0500
Re: [NTC] Friday in paradise
Douglas O. Pauls
Mon, 17 Oct 2005 09:21:33 -0500
New Sender DUTTON Phil
Re: New IPC email forum
DUTTON Phil
Thu, 6 Oct 2005 09:44:39 +1000
New Sender Dwight Mattix
Re: <List>[TN] Friday in paradise
Dwight Mattix
Fri, 14 Oct 2005 11:31:57 -0700
Re: Delamination at Thermal Via area?
Dwight Mattix
Wed, 19 Oct 2005 07:53:16 -0700
Re: Delamination at Thermal Via area?
Dwight Mattix
Wed, 19 Oct 2005 11:32:29 -0700
Re: Delamination at Thermal Via area?
Dwight Mattix
Wed, 19 Oct 2005 11:33:05 -0700
Re: Delamination at Thermal Via area?
Dwight Mattix
Wed, 19 Oct 2005 11:42:35 -0700
Re: Delamination at Thermal Via area?
Dwight Mattix
Wed, 19 Oct 2005 14:20:54 -0700
Re: Delamination at Thermal Via area?
Dwight Mattix
Wed, 19 Oct 2005 14:24:31 -0700
Re: Delamination at Thermal Via area?
Dwight Mattix
Wed, 19 Oct 2005 14:29:25 -0700
Re: PCB Score Depth
Dwight Mattix
Wed, 5 Oct 2005 16:03:47 -0700
Re: Voids in BGAs, again
Dwight Mattix
Tue, 18 Oct 2005 07:19:13 -0700
New Sender Eddie Rocha
ENIG and brittleness
Eddie Rocha
Wed, 26 Oct 2005 10:50:01 -0700
Re: ENIG and brittleness
Eddie Rocha
Thu, 27 Oct 2005 09:05:43 -0700
Re: Filled vias
Eddie Rocha
Wed, 5 Oct 2005 09:39:19 -0700
Re: Hasl
Eddie Rocha
Tue, 11 Oct 2005 14:16:06 -0700
New Sender Edward Szpruch
Re: (2) [TN] Electrolytic Tin Plating
Edward Szpruch
Sun, 16 Oct 2005 14:56:06 +0200
Re: New IPC email forum
Edward Szpruch
Thu, 6 Oct 2005 12:28:11 +0200
Re: New Topic
Edward Szpruch
Thu, 6 Oct 2005 13:51:52 +0200
New Sender ekalgren
Re: MIL-P-18177
ekalgren
Fri, 14 Oct 2005 11:25:00 -0400
New Sender Eric CHRISTISON
Re: Mixing Fluxes: Water Sol and Rosin
Eric CHRISTISON
Tue, 4 Oct 2005 16:47:50 +0100
Re: New IPC email forum
Eric CHRISTISON
Mon, 10 Oct 2005 10:36:35 +0100
New Sender Fatih ISIK
Mil-P-55110D vs Mil-P-55110E
Fatih ISIK
Fri, 7 Oct 2005 01:38:24 -0500
New Sender Fineline Circuits, Inc
Re: (2) [TN] Electrolytic Tin Plating
Fineline Circuits, Inc
Mon, 17 Oct 2005 14:11:26 -0400
Dwell Time
Fineline Circuits, Inc
Thu, 6 Oct 2005 14:12:55 -0400
Electrolytic Tin Plating
Fineline Circuits, Inc
Fri, 14 Oct 2005 10:19:39 -0400
Re: Electrolytic Tin Plating
Fineline Circuits, Inc
Fri, 14 Oct 2005 12:39:10 -0400
Re: Electrolytic Tin Plating
Fineline Circuits, Inc
Fri, 14 Oct 2005 15:41:56 -0400
New Sender Fox, Ian
Re: New IPC email forum
Fox, Ian
Wed, 5 Oct 2005 16:13:20 +0100
New Sender Frank Kimmey
Re: Buss Bar Attachment Method
Frank Kimmey
Mon, 10 Oct 2005 13:58:13 -0700
Re: corner routing
Frank Kimmey
Mon, 3 Oct 2005 10:33:05 -0700
Re: E-mail address
Frank Kimmey
Tue, 18 Oct 2005 12:27:20 -0700
Re: New IPC email forum
Frank Kimmey
Wed, 5 Oct 2005 08:23:15 -0700
Re: New IPC email forum
Frank Kimmey
Thu, 6 Oct 2005 07:13:16 -0700
RoHS Pressfit Connector
Frank Kimmey
Tue, 4 Oct 2005 08:37:20 -0700
Re: RoHS Pressfit Connector
Frank Kimmey
Tue, 4 Oct 2005 09:23:13 -0700
New Sender Franklin Asbell
Re: (tn)(pwb) When do you need to bake a circuit board prior to assembly? Are there standards?
Franklin Asbell
Mon, 10 Oct 2005 10:05:17 -0500
Re: <List>Re: [TN] New Old Topic
Franklin Asbell
Thu, 6 Oct 2005 16:47:51 -0500
Re: <List>Re: [TN] New Old Topic
Franklin Asbell
Thu, 6 Oct 2005 16:54:25 -0500
Re: Buss Bar Attachment Method
Franklin Asbell
Mon, 10 Oct 2005 12:59:01 -0500
Re: Class 2 Vs 3
Franklin Asbell
Fri, 14 Oct 2005 13:17:13 -0500
Congratulations Steve
Franklin Asbell
Tue, 25 Oct 2005 07:45:03 -0500
Re: corner routing
Franklin Asbell
Mon, 3 Oct 2005 13:13:21 -0500
Re: Delamination at Thermal Via area?
Franklin Asbell
Wed, 19 Oct 2005 10:39:00 -0500
Re: Delamination at Thermal Via area?
Franklin Asbell
Wed, 19 Oct 2005 10:43:49 -0500
Re: Delamination at Thermal Via area?
Franklin Asbell
Wed, 19 Oct 2005 13:53:14 -0500
Re: Delamination at Thermal Via area?
Franklin Asbell
Wed, 19 Oct 2005 16:29:38 -0500
Re: Electrolytic Tin Plating
Franklin Asbell
Fri, 14 Oct 2005 09:40:37 -0500
Re: Fabricators
Franklin Asbell
Mon, 10 Oct 2005 11:09:18 -0500
Re: Hasl
Franklin Asbell
Wed, 12 Oct 2005 12:24:41 -0500
Re: Hasl
Franklin Asbell
Wed, 12 Oct 2005 12:56:07 -0500
Re: Hasl
Franklin Asbell
Wed, 12 Oct 2005 13:06:23 -0500
Re: Hasl
Franklin Asbell
Thu, 13 Oct 2005 11:13:13 -0500
Re: Microsection
Franklin Asbell
Fri, 7 Oct 2005 07:47:20 -0500
Re: Microsection
Franklin Asbell
Fri, 7 Oct 2005 08:31:08 -0500
Re: Microsection
Franklin Asbell
Fri, 7 Oct 2005 08:36:38 -0500
Re: Microsectioning equipment...
Franklin Asbell
Tue, 4 Oct 2005 08:56:40 -0500
Re: Microsectioning equipment...NTC
Franklin Asbell
Tue, 4 Oct 2005 09:57:50 -0500
Re: MIL-P-18177
Franklin Asbell
Fri, 14 Oct 2005 10:11:13 -0500
Re: mil-p-55110 d/e
Franklin Asbell
Fri, 7 Oct 2005 08:00:27 -0500
Re: mil-p-55110 d/e
Franklin Asbell
Fri, 7 Oct 2005 08:04:07 -0500
Re: mil-p-55110 d/e
Franklin Asbell
Fri, 7 Oct 2005 08:12:12 -0500
Re: mil-p-55110 d/e
Franklin Asbell
Mon, 10 Oct 2005 07:37:31 -0500
Re: MIL-PRT-31032 vs IPC-6012
Franklin Asbell
Thu, 6 Oct 2005 08:15:11 -0500
Re: Mixing Fluxes: Water Sol and Rosin - NTC
Franklin Asbell
Tue, 4 Oct 2005 13:32:56 -0500
New IPC email forum
Franklin Asbell
Wed, 5 Oct 2005 10:05:05 -0500
Re: New IPC email forum
Franklin Asbell
Wed, 5 Oct 2005 10:50:26 -0500
Re: New IPC email forum
Franklin Asbell
Wed, 5 Oct 2005 10:55:51 -0500
Re: New IPC email forum
Franklin Asbell
Wed, 5 Oct 2005 10:57:32 -0500
Re: New IPC email forum
Franklin Asbell
Wed, 5 Oct 2005 11:36:30 -0500
Re: New IPC email forum
Franklin Asbell
Thu, 6 Oct 2005 08:01:48 -0500
New Old Topic
Franklin Asbell
Thu, 6 Oct 2005 11:10:40 -0500
Re: New Old Topic
Franklin Asbell
Thu, 6 Oct 2005 12:23:24 -0500
Re: New Old Topic
Franklin Asbell
Thu, 6 Oct 2005 15:23:21 -0500
New Topic
Franklin Asbell
Wed, 5 Oct 2005 10:59:34 -0500
Re: NTC:
Franklin Asbell
Thu, 13 Oct 2005 09:52:37 -0500
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Franklin Asbell
Wed, 26 Oct 2005 09:56:02 -0500
Re: RoHS Pressfit Connector
Franklin Asbell
Tue, 4 Oct 2005 10:53:04 -0500
Re: RoHS Pressfit Connector
Franklin Asbell
Tue, 4 Oct 2005 12:03:01 -0500
Re: RoHS Pressfit Connector
Franklin Asbell
Tue, 4 Oct 2005 12:37:50 -0500
Re: RoHS Process Compliant boards
Franklin Asbell
Tue, 11 Oct 2005 11:21:32 -0500
Re: RoHS Process Compliant boards
Franklin Asbell
Tue, 11 Oct 2005 12:47:34 -0500
Re: RoHS Process Compliant boards
Franklin Asbell
Tue, 11 Oct 2005 13:05:00 -0500
Re: SAC 305 versus Sn100C
Franklin Asbell
Tue, 11 Oct 2005 15:12:40 -0500
Single mount grinding device
Franklin Asbell
Mon, 3 Oct 2005 15:26:26 -0500
Single mount grinding device
Franklin Asbell
Tue, 4 Oct 2005 10:08:58 -0500
Re: Solder reflow audit
Franklin Asbell
Fri, 21 Oct 2005 17:23:46 -0500
New Sender Franklin D Asbell
Re: Hasl
Franklin D Asbell
Wed, 12 Oct 2005 17:07:32 -0500
Re: Hasl
Franklin D Asbell
Wed, 12 Oct 2005 17:11:11 -0500
Re: Microsection
Franklin D Asbell
Fri, 7 Oct 2005 06:02:38 -0500
Re: mil-p-55110 d/e
Franklin D Asbell
Fri, 7 Oct 2005 04:22:00 -0500
Re: New Topic
Franklin D Asbell
Wed, 5 Oct 2005 14:03:36 -0500
Re: NTC Okay, all you real smart guys.........
Franklin D Asbell
Mon, 3 Oct 2005 21:07:58 -0500
Re: PCB Score Depth
Franklin D Asbell
Wed, 5 Oct 2005 18:11:10 -0500
New Sender Frederick Miller
Re: New IPC email forum
Frederick Miller
Wed, 5 Oct 2005 12:01:46 -0400
Re: New IPC email forum
Frederick Miller
Wed, 5 Oct 2005 12:29:09 -0400
Re: Urgent! Acrylic coating
Frederick Miller
Thu, 27 Oct 2005 11:15:55 -0400
New Sender Gabriela Bogdan
BGA failure and assembly repair
Gabriela Bogdan
Fri, 28 Oct 2005 10:36:54 +0300
Re: BGA failure and assembly repair
Gabriela Bogdan
Fri, 28 Oct 2005 13:05:13 +0300
Re: Microsection
Gabriela Bogdan
Sat, 8 Oct 2005 09:56:27 +0300
Re: New IPC email forum
Gabriela Bogdan
Thu, 6 Oct 2005 09:42:58 +0300
Re: SV: [TN] BGA failure and assembly repair
Gabriela Bogdan
Fri, 28 Oct 2005 18:12:50 +0300
New Sender Genny Gibbard
Re: Hasl
Genny Gibbard
Wed, 12 Oct 2005 11:35:08 -0600
Steve's award
Genny Gibbard
Tue, 25 Oct 2005 11:40:58 -0600
Re: [NTC] Friday in paradise
Genny Gibbard
Fri, 14 Oct 2005 11:55:45 -0600
Re: [NTC] Friday in paradise
Genny Gibbard
Fri, 14 Oct 2005 13:55:44 -0600
New Sender Geoff Layhe of Lamar Group
Re: Aluminium substrate
Geoff Layhe of Lamar Group
Fri, 14 Oct 2005 10:09:45 +0100
Re: MIL-P-18177
Geoff Layhe of Lamar Group
Fri, 14 Oct 2005 16:22:12 +0100
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Geoff Layhe of Lamar Group
Wed, 26 Oct 2005 15:50:57 +0100
New Sender George Milad
Re: <List>[TN] wire bonding
George Milad
Tue, 11 Oct 2005 19:43:07 EDT
New Sender George Patrick
Re: <List>Re: [TN] New Old Topic
George Patrick
Thu, 6 Oct 2005 14:43:18 -0700
Re: New IPC email forum
George Patrick
Wed, 5 Oct 2005 11:59:15 -0700
Re: New IPC email forum
George Patrick
Mon, 10 Oct 2005 14:59:27 -0700
Re: New IPC email forum
George Patrick
Mon, 10 Oct 2005 15:14:34 -0700
Re: New IPC email forum
George Patrick
Tue, 11 Oct 2005 09:26:16 -0700
Re: [DC] 2006 - Year of the PCB Designer
George Patrick
Tue, 25 Oct 2005 13:48:24 -0700
New Sender Gerard O'Brien
Re: Direct Immersion Gold
Gerard O'Brien
Thu, 13 Oct 2005 07:56:10 -0400
Re: Hasl
Gerard O'Brien
Wed, 12 Oct 2005 08:51:06 -0400
Re: Hasl
Gerard O'Brien
Wed, 12 Oct 2005 10:00:40 -0400
Re: Hasl
Gerard O'Brien
Thu, 13 Oct 2005 08:03:36 -0400
Re: Hasl
Gerard O'Brien
Thu, 13 Oct 2005 10:22:52 -0400
Re: Hasl
Gerard O'Brien
Thu, 13 Oct 2005 11:38:59 -0400
Re: IAG used for keypad contacts
Gerard O'Brien
Fri, 28 Oct 2005 08:33:18 -0400
Re: RoHS Process Compliant boards
Gerard O'Brien
Tue, 11 Oct 2005 11:37:10 -0400
Re: Shower head
Gerard O'Brien
Thu, 20 Oct 2005 07:46:39 -0400
New Sender Glenn Pelkey
Re: Component failure analysis labs
Glenn Pelkey
Thu, 27 Oct 2005 12:45:33 -0700
New Sender Graham Naisbitt
Sedition
Graham Naisbitt
Thu, 6 Oct 2005 16:44:19 +0100
Re: Urgent! Acrylic coating
Graham Naisbitt
Thu, 27 Oct 2005 16:15:51 +0100
Re: Urgent! Acrylic coating
Graham Naisbitt
Mon, 31 Oct 2005 12:22:07 +0000
New Sender Green, Mike
Re: New IPC email forum
Green, Mike
Mon, 10 Oct 2005 14:05:14 -0700
New Sender Guenter Grossmann
Re: Microsectioning equipment
Guenter Grossmann
Wed, 5 Oct 2005 09:19:59 +0200
New Sender Gus Abu-Hamdeh
Minimum shear strength values for 30/24 mil Sn63 solder balls
Gus Abu-Hamdeh
Tue, 18 Oct 2005 14:48:11 -0700
New Sender Guy Ramsey
Re: (tn)(pwb) When do you need to bake a circuit board prior to assembly? Are there standards?
Guy Ramsey
Mon, 10 Oct 2005 11:37:19 -0400
Re: Dwell Time
Guy Ramsey
Thu, 6 Oct 2005 16:42:57 -0400
Re: IPC7351 Questions
Guy Ramsey
Tue, 4 Oct 2005 08:02:14 -0400
Re: IPC7351 Questions
Guy Ramsey
Tue, 4 Oct 2005 11:44:32 -0400
Re: Solder Stations
Guy Ramsey
Mon, 17 Oct 2005 14:15:21 -0400
New Sender Gwen Jader
Begin now to manage the information needed to comply with the European Union's RoHS Directive
Gwen Jader
Wed, 19 Oct 2005 10:01:05 -0500
Don't Miss Lead Free Conference in Brussels, 17-19 October
Gwen Jader
Thu, 6 Oct 2005 09:24:01 -0500
Save 10% on Lead Free Conference Dec. 6 - 8 in Boston: Register by Nov. 1
Gwen Jader
Wed, 19 Oct 2005 10:21:58 -0500
New Sender Hasan Zamir
Board House
Hasan Zamir
Fri, 28 Oct 2005 11:20:26 -0400
Re: Board House
Hasan Zamir
Fri, 28 Oct 2005 11:25:33 -0400
New Sender Ingemar Hernefjord (KC/EMW)
Re: Ferrite Core Inductors Fracturing Help
Ingemar Hernefjord (KC/EMW)
Sat, 8 Oct 2005 08:25:16 +0100
Microsection
Ingemar Hernefjord (KC/EMW)
Fri, 7 Oct 2005 10:59:26 +0100
Re: Microsection
Ingemar Hernefjord (KC/EMW)
Sat, 8 Oct 2005 07:50:22 +0100
Re: New IPC email forum
Ingemar Hernefjord (KC/EMW)
Thu, 6 Oct 2005 09:57:44 +0100
Re: New IPC email forum
Ingemar Hernefjord (KC/EMW)
Fri, 7 Oct 2005 12:51:33 +0200
Re: wire bonding
Ingemar Hernefjord (KC/EMW)
Wed, 12 Oct 2005 11:18:24 +0200
New Sender Ingemar Hernefjord
NTC:Friday
Ingemar Hernefjord
Fri, 21 Oct 2005 15:44:27 +0200
PWB challenges
Ingemar Hernefjord
Fri, 14 Oct 2005 13:20:03 +0200
SV: wire bondable immersion gold
Ingemar Hernefjord
Tue, 18 Oct 2005 22:18:30 +0200
SV: [TN] BGA failure and assembly repair
Ingemar Hernefjord
Fri, 28 Oct 2005 11:41:31 +0200
SV: [TN] BGA failure and assembly repair
Ingemar Hernefjord
Fri, 28 Oct 2005 16:12:20 +0200
SV: [TN] Delamination at Thermal Via area?
Ingemar Hernefjord
Wed, 19 Oct 2005 18:50:09 +0200
SV: [TN] Delamination at Thermal Via area?
Ingemar Hernefjord
Thu, 20 Oct 2005 01:17:54 +0200
SV: [TN] Electrolytic Tin Plating
Ingemar Hernefjord
Mon, 17 Oct 2005 12:30:19 +0200
SV: [TN] Friday in paradise
Ingemar Hernefjord
Fri, 14 Oct 2005 21:51:27 +0200
SV: [TN] Haloween
Ingemar Hernefjord
Mon, 31 Oct 2005 23:18:20 +0100
SV: [TN] LEAD FREE PART IN SNPB PROCESS
Ingemar Hernefjord
Sat, 29 Oct 2005 10:34:20 +0200
SV: [TN] LEAD FREE PART IN SNPB PROCESS
Ingemar Hernefjord
Sat, 29 Oct 2005 21:58:36 +0200
SV: [TN] NTC: Male female dies
Ingemar Hernefjord
Tue, 25 Oct 2005 14:41:20 +0200
SV: [TN] PBGA soldejoint open , what's the max. ramp up rate requirement of wave soldering?--
Ingemar Hernefjord
Wed, 19 Oct 2005 19:20:31 +0200
SV: [TN] PWB challenges
Ingemar Hernefjord
Sat, 15 Oct 2005 12:12:37 +0200
SV: [TN] Steve's award
Ingemar Hernefjord
Tue, 25 Oct 2005 22:14:49 +0200
SV: [TN] SV: wire bondable immersion gold
Ingemar Hernefjord
Wed, 19 Oct 2005 10:35:35 +0200
SV: [TN] SV: [TN] Electrolytic Tin Plating
Ingemar Hernefjord
Mon, 17 Oct 2005 17:15:48 +0200
SV: [TN] SV: [TN] Voids in BGAs, again
Ingemar Hernefjord
Tue, 18 Oct 2005 22:21:13 +0200
SV: [TN] TechNet working?
Ingemar Hernefjord
Mon, 24 Oct 2005 21:23:02 +0200
SV: [TN] Urgent! Acrylic coating
Ingemar Hernefjord
Thu, 27 Oct 2005 19:23:20 +0200
SV: [TN] Urgent! Acrylic coating
Ingemar Hernefjord
Thu, 27 Oct 2005 19:26:35 +0200
SV: [TN] Urgent! Acrylic coating
Ingemar Hernefjord
Thu, 27 Oct 2005 19:32:45 +0200
SV: [TN] Urgent! Acrylic coating
Ingemar Hernefjord
Thu, 27 Oct 2005 19:38:47 +0200
SV: [TN] Urgent! Acrylic coating
Ingemar Hernefjord
Thu, 27 Oct 2005 19:44:02 +0200
SV: [TN] Via in pad finished flatness
Ingemar Hernefjord
Tue, 25 Oct 2005 22:21:14 +0200
SV: [TN] Voids in BGAs, again
Ingemar Hernefjord
Tue, 18 Oct 2005 16:45:09 +0200
SV: [TN] Voids in BGAs, again
Ingemar Hernefjord
Thu, 20 Oct 2005 15:11:48 +0200
SV: [TN] [DC] 2006 - Year of the PCB Designer
Ingemar Hernefjord
Tue, 25 Oct 2005 22:36:41 +0200
test, pay no attention
Ingemar Hernefjord
Fri, 14 Oct 2005 12:03:58 +0200
Urgent! Acrylic coating
Ingemar Hernefjord
Thu, 27 Oct 2005 16:31:47 +0200
New Sender Ivanoe Pedruzzi
Re: Hasl
Ivanoe Pedruzzi
Thu, 13 Oct 2005 13:58:00 +0200
Re: TechNet working? (NTC)
Ivanoe Pedruzzi
Tue, 25 Oct 2005 10:51:54 +0200
New Sender Jack C. Olson
Re: Class 2 Vs 3
Jack C. Olson
Mon, 17 Oct 2005 11:11:54 -0500
Levity and Whit
Jack C. Olson
Thu, 13 Oct 2005 09:45:28 -0500
Re: Levity and Whit
Jack C. Olson
Thu, 13 Oct 2005 10:05:21 -0500
Re: New Old Topic
Jack C. Olson
Fri, 7 Oct 2005 10:22:34 -0500
New Sender Jack Crawford
Re: Solder reflow audit
Jack Crawford
Fri, 21 Oct 2005 22:26:27 -0500
Re: Solder Sleeves
Jack Crawford
Mon, 31 Oct 2005 16:27:28 -0600
New Sender James Hofer
Re: Filled vias
James Hofer
Wed, 5 Oct 2005 15:56:26 -0700
Re: New IPC email forum
James Hofer
Wed, 5 Oct 2005 16:00:23 -0700
Re: New Topic
James Hofer
Wed, 5 Oct 2005 16:04:39 -0700
Re: PCB Score Depth
James Hofer
Wed, 5 Oct 2005 16:08:33 -0700
Re: PCB Score Depth
James Hofer
Wed, 5 Oct 2005 16:11:10 -0700
New Sender JaMi Smith
Re: Delamination at Thermal Via area?
JaMi Smith
Wed, 19 Oct 2005 17:26:20 -0700
New Sender Jason Gregory
Re: Hasl
Jason Gregory
Thu, 13 Oct 2005 08:56:35 -0500
Re: LEAD FREE PART IN SNPB PROCESS
Jason Gregory
Fri, 28 Oct 2005 10:13:57 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Jason Gregory
Tue, 4 Oct 2005 15:44:40 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Jason Gregory
Tue, 4 Oct 2005 16:07:04 -0500
Re: New IPC email forum
Jason Gregory
Wed, 5 Oct 2005 10:46:24 -0500
Re: New IPC email forum
Jason Gregory
Wed, 5 Oct 2005 12:41:11 -0500
Re: NTC...New IPC email forum
Jason Gregory
Wed, 5 Oct 2005 13:40:32 -0500
Re: NTC:
Jason Gregory
Thu, 13 Oct 2005 09:54:09 -0500
Re: NTC:
Jason Gregory
Thu, 13 Oct 2005 11:16:15 -0500
Re: NTC:Friday
Jason Gregory
Fri, 21 Oct 2005 08:55:02 -0500
Re: NTC:Friday
Jason Gregory
Fri, 21 Oct 2005 10:17:29 -0500
Re: SAC reflow profile and flux vaporization
Jason Gregory
Thu, 13 Oct 2005 16:04:34 -0500
Re: SAC reflow profile and flux vaporization
Jason Gregory
Thu, 13 Oct 2005 16:51:58 -0500
Re: TechNet working?
Jason Gregory
Tue, 25 Oct 2005 08:52:03 -0500
Re: Voids in BGAs, again
Jason Gregory
Mon, 17 Oct 2005 10:41:53 -0500
New Sender Jason
Solder reflow audit
Jason
Fri, 21 Oct 2005 16:46:21 -0500
New Sender Jeff Seeger
IPC/DC Boston chapter mtg, Thurs @ PCD-East
Jeff Seeger
Thu, 6 Oct 2005 15:22:50 -0400
New Sender Jeffrey Bush
Re: <List>[TN] RoHS Process Compliant boards
Jeffrey Bush
Tue, 11 Oct 2005 17:04:32 -0400
Re: CAGE codes, FedTeDS and DD2345. Oh My!
Jeffrey Bush
Fri, 14 Oct 2005 15:08:09 -0400
Re: Delamination at Thermal Via area?
Jeffrey Bush
Wed, 19 Oct 2005 12:32:33 -0400
Re: Delamination at Thermal Via area?
Jeffrey Bush
Thu, 20 Oct 2005 07:28:25 -0400
Re: Delamination at Thermal Via area?
Jeffrey Bush
Thu, 20 Oct 2005 08:14:01 -0400
Re: Dwell Time
Jeffrey Bush
Thu, 6 Oct 2005 14:45:29 -0400
Re: Electrolytic Tin Plating
Jeffrey Bush
Fri, 14 Oct 2005 13:43:08 -0400
Re: ENIG and brittleness
Jeffrey Bush
Thu, 27 Oct 2005 11:31:22 -0400
Re: FAB: Test Methodology for "Alternate" finishes?
Jeffrey Bush
Thu, 27 Oct 2005 16:56:55 -0400
Re: Filled vias
Jeffrey Bush
Wed, 5 Oct 2005 13:22:45 -0400
Re: Hasl
Jeffrey Bush
Wed, 12 Oct 2005 11:59:43 -0400
Re: Hasl
Jeffrey Bush
Wed, 12 Oct 2005 13:43:51 -0400
Re: Hasl
Jeffrey Bush
Thu, 13 Oct 2005 11:58:35 -0400
Re: Hasl
Jeffrey Bush
Thu, 13 Oct 2005 11:59:31 -0400
Re: Microscopes
Jeffrey Bush
Wed, 5 Oct 2005 16:38:21 -0400
Re: MIL-P-18177
Jeffrey Bush
Fri, 14 Oct 2005 14:44:00 -0400
Re: MIL-PRT-31032 vs IPC-6012
Jeffrey Bush
Thu, 6 Oct 2005 09:35:44 -0400
Re: New IPC email forum
Jeffrey Bush
Fri, 7 Oct 2005 09:49:11 -0400
Re: New Topic
Jeffrey Bush
Wed, 5 Oct 2005 13:19:38 -0400
Re: New Topic
Jeffrey Bush
Wed, 5 Oct 2005 16:45:14 -0400
Re: PCB Score Depth
Jeffrey Bush
Thu, 6 Oct 2005 07:47:34 -0400
Re: RoHS Process Compliant boards
Jeffrey Bush
Tue, 11 Oct 2005 17:02:21 -0400
Re: Small Hole Microsectiooning Equipmant
Jeffrey Bush
Mon, 17 Oct 2005 08:27:28 -0400
Re: SV: [TN] Via in pad finished flatness-3 more questions
Jeffrey Bush
Wed, 26 Oct 2005 07:21:54 -0400
New Sender Jerry Dengler
Re: choosing solder vendor
Jerry Dengler
Tue, 18 Oct 2005 09:26:54 -0400
Re: Delamination at Thermal Via area?
Jerry Dengler
Wed, 19 Oct 2005 15:25:26 -0400
Re: Has anybody seen this?
Jerry Dengler
Fri, 21 Oct 2005 09:52:56 -0400
Re: Hasl
Jerry Dengler
Wed, 12 Oct 2005 13:24:41 -0400
Re: New IPC email forum
Jerry Dengler
Wed, 5 Oct 2005 11:40:32 -0400
New Sender Jihua Du
Plate/pre-tin BiSn or SnAg solder to PCB
Jihua Du
Tue, 18 Oct 2005 15:14:54 -0700
New Sender Jim Clark
Re: New IPC email forum
Jim Clark
Thu, 6 Oct 2005 05:36:07 -0500
New Sender Jim Henderson
Re: New IPC email forum
Jim Henderson
Wed, 5 Oct 2005 11:14:35 -0400
Re: New Topic
Jim Henderson
Wed, 5 Oct 2005 13:28:34 -0400
New Sender Jim Jablonsky
Re: Gold Plating Peeling...
Jim Jablonsky
Fri, 28 Oct 2005 12:15:56 -0400
New Sender Joe Fjelstad
Re: Haloween
Joe Fjelstad
Mon, 31 Oct 2005 15:38:20 EST
IC Packaging technology
Joe Fjelstad
Mon, 17 Oct 2005 21:54:44 EDT
Re: New IPC email forum
Joe Fjelstad
Thu, 6 Oct 2005 11:32:23 EDT
Re: SV: wire bondable immersion gold
Joe Fjelstad
Tue, 18 Oct 2005 16:57:43 EDT
New Sender Joe Hughes
Re: New Topic
Joe Hughes
Thu, 6 Oct 2005 09:35:21 -0700
New Sender Joe Russeau
Re: <List>Re: [TN] New Old Topic
Joe Russeau
Fri, 7 Oct 2005 10:28:59 -0500
Re: New IPC email forum
Joe Russeau
Wed, 5 Oct 2005 10:15:49 -0500
Re: New IPC email forum
Joe Russeau
Wed, 5 Oct 2005 14:03:20 -0500
Re: NTC...New IPC email forum
Joe Russeau
Wed, 5 Oct 2005 14:05:03 -0500
Re: NTC:
Joe Russeau
Thu, 13 Oct 2005 16:01:15 -0500
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Joe Russeau
Wed, 26 Oct 2005 10:21:06 -0500
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Joe Russeau
Wed, 26 Oct 2005 12:24:59 -0500
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Joe Russeau
Thu, 27 Oct 2005 09:59:36 -0500
Re: RoHS Process Compliant boards
Joe Russeau
Tue, 11 Oct 2005 14:52:11 -0500
Re: TechNet working?
Joe Russeau
Tue, 25 Oct 2005 09:23:55 -0500
New Sender Joel Mearig
Re: choosing solder vendor
Joel Mearig
Wed, 19 Oct 2005 08:15:24 -0700
Re: ENIG and brittleness
Joel Mearig
Wed, 26 Oct 2005 12:02:03 -0700
Hand Soldering Long Gold Pins
Joel Mearig
Tue, 4 Oct 2005 08:58:48 -0700
Re: Hand Soldering Long Gold Pins
Joel Mearig
Tue, 4 Oct 2005 09:40:10 -0700
Re: Hand Soldering Long Gold Pins
Joel Mearig
Tue, 4 Oct 2005 09:41:57 -0700
Re: Hand Soldering Long Gold Pins
Joel Mearig
Tue, 4 Oct 2005 09:56:07 -0700
Re: Hand Soldering Long Gold Pins
Joel Mearig
Tue, 4 Oct 2005 09:59:19 -0700
Re: Hasl
Joel Mearig
Tue, 11 Oct 2005 12:54:21 -0700
Re: LEAD FREE PART IN SNPB PROCESS
Joel Mearig
Fri, 28 Oct 2005 12:26:47 -0700
PCB Score Depth
Joel Mearig
Wed, 5 Oct 2005 14:52:18 -0700
Re: SAC 305 versus Sn100C
Joel Mearig
Tue, 11 Oct 2005 13:42:56 -0700
Re: Solder Stations
Joel Mearig
Fri, 14 Oct 2005 14:49:52 -0700
New Sender John Bauer
Buss Bar Attachment Method
John Bauer
Mon, 10 Oct 2005 12:23:31 -0500
Re: Buss Bar Attachment Method
John Bauer
Mon, 10 Oct 2005 13:43:15 -0700
New Sender John Burke
Re: (NTC)Removing oxide from silver flakes.
John Burke
Fri, 21 Oct 2005 14:32:57 -0700
Re: Board House
John Burke
Fri, 28 Oct 2005 09:59:37 -0700
Re: Buss Bar Attachment Method
John Burke
Mon, 10 Oct 2005 15:10:08 -0700
Re: Delamination at Thermal Via area?
John Burke
Wed, 19 Oct 2005 13:00:00 -0700
Re: Fabricators and information passage
John Burke
Fri, 7 Oct 2005 09:48:05 -0700
Re: Ferrite Core Inductors Fracturing Help
John Burke
Fri, 7 Oct 2005 12:17:53 -0700
Friday in paradise
John Burke
Fri, 14 Oct 2005 10:47:13 -0700
Re: Friday in paradise
John Burke
Fri, 14 Oct 2005 10:55:13 -0700
Re: Halloween NTC
John Burke
Mon, 31 Oct 2005 14:00:44 -0800
Haloween
John Burke
Mon, 31 Oct 2005 12:27:46 -0800
Re: Haloween
John Burke
Mon, 31 Oct 2005 14:05:33 -0800
Re: Hasl
John Burke
Wed, 12 Oct 2005 15:25:54 -0700
Re: Keeping in the spirit of things
John Burke
Tue, 4 Oct 2005 13:04:23 -0700
Re: LEAD FREE PART IN SNPB PROCESS
John Burke
Fri, 28 Oct 2005 12:53:43 -0700
Re: Minimum shear strength values for 30/24 mil Sn63 solder balls
John Burke
Tue, 18 Oct 2005 15:13:31 -0700
Re: Mixing Fluxes: Water Sol and Rosin
John Burke
Tue, 4 Oct 2005 13:51:41 -0700
My assembly is putting out black smoke - HELP
John Burke
Fri, 7 Oct 2005 14:10:37 -0700
Re: New IPC email forum
John Burke
Wed, 5 Oct 2005 12:15:08 -0700
Re: Removing oxide from silver flakes.
John Burke
Fri, 21 Oct 2005 13:40:51 -0700
Re: Removing oxide from silver flakes.
John Burke
Fri, 21 Oct 2005 13:56:18 -0700
Re: Revisions
John Burke
Mon, 10 Oct 2005 13:39:00 -0700
Re: Solder Stations
John Burke
Mon, 17 Oct 2005 11:49:16 -0700
Re: TechNet working?
John Burke
Mon, 24 Oct 2005 22:35:14 -0700
Re: Voids in BGAs, again
John Burke
Tue, 18 Oct 2005 12:05:48 -0700
Re: [NTC] Friday in paradise
John Burke
Fri, 14 Oct 2005 12:52:05 -0700
Re: [NTC] Friday in paradise
John Burke
Fri, 14 Oct 2005 13:11:57 -0700
New Sender John Maxwell
Re: LEAD FREE PART IN SNPB PROCESS
John Maxwell
Fri, 28 Oct 2005 15:39:21 -0700
Re: SAC 305 versus Sn100C
John Maxwell
Tue, 11 Oct 2005 16:03:06 -0700
Re: SAC 305 versus Sn100C
John Maxwell
Tue, 11 Oct 2005 21:36:30 -0700
New Sender John Parsons
FAB: Test Methodology for "Alternate" finishes?
John Parsons
Thu, 27 Oct 2005 13:06:55 -0700
MIL-P-18177
John Parsons
Fri, 14 Oct 2005 07:59:03 -0700
Re: MIL-P-18177
John Parsons
Fri, 14 Oct 2005 08:36:50 -0700
Re: New Topic
John Parsons
Wed, 5 Oct 2005 09:43:04 -0700
New Sender Joseph H. Smith
Re: Selective conformal coating machine
Joseph H. Smith
Sat, 29 Oct 2005 09:16:50 -0400
New Sender joseph H.smith
Re: TechNet working?
joseph H.smith
Tue, 25 Oct 2005 14:39:20 +0530
New Sender Joyce Koo
Re: Copper Ductility Characterization
Joyce Koo
Tue, 4 Oct 2005 12:26:20 -0400
Re: Fabricators and information passage
Joyce Koo
Tue, 11 Oct 2005 09:35:30 -0400
Re: Gold Plating Peeling...
Joyce Koo
Fri, 28 Oct 2005 16:28:08 -0400
Re: Need ENEPIG sources
Joyce Koo
Wed, 5 Oct 2005 09:09:32 -0400
Re: Need ENEPIG sources
Joyce Koo
Wed, 5 Oct 2005 12:11:07 -0400
Re: New IPC email forum
Joyce Koo
Wed, 5 Oct 2005 16:17:29 -0400
Re: New IPC email forum
Joyce Koo
Thu, 6 Oct 2005 08:44:08 -0400
Re: Removing oxide from silver flakes.
Joyce Koo
Fri, 21 Oct 2005 15:09:43 -0400
Re: SAC reflow profile and flux vaporization
Joyce Koo
Thu, 13 Oct 2005 17:33:48 -0400
Re: SAC reflow profile and flux vaporization
Joyce Koo
Fri, 14 Oct 2005 09:03:19 -0400
Re: SV: [TN] SV: wire bondable immersion gold
Joyce Koo
Wed, 19 Oct 2005 09:00:23 -0400
Re: TechNet working?
Joyce Koo
Mon, 24 Oct 2005 14:14:21 -0400
Re: use fo high halide flux on avionics: kester 331 flux
Joyce Koo
Mon, 3 Oct 2005 09:00:33 -0400
wire bondable immersion gold
Joyce Koo
Tue, 18 Oct 2005 12:31:44 -0400
Re: wire bonding
Joyce Koo
Wed, 12 Oct 2005 09:04:12 -0400
Re: wire bonding
Joyce Koo
Wed, 12 Oct 2005 13:38:43 -0400
New Sender jrm
Re: wire bonding
jrm
Wed, 12 Oct 2005 10:23:17 -0700
New Sender Judy Brown
Re: (NTC) ENIG and brittleness
Judy Brown
Thu, 27 Oct 2005 13:21:06 -0700
Re: New IPC email forum
Judy Brown
Wed, 5 Oct 2005 10:07:29 -0700
New Sender Kane, Joseph E (US SSA)
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Kane, Joseph E (US SSA)
Wed, 26 Oct 2005 13:36:00 -0400
Re: Selective conformal coating machine
Kane, Joseph E (US SSA)
Thu, 27 Oct 2005 12:57:44 -0400
Re: Voids in BGAs, again
Kane, Joseph E (US SSA)
Mon, 17 Oct 2005 11:35:36 -0400
New Sender Karl Sauter
Re: Delamination at Thermal Via area?
Karl Sauter
Wed, 19 Oct 2005 08:47:12 -0700
Re: Delamination at Thermal Via area?
Karl Sauter
Wed, 19 Oct 2005 12:06:40 -0700
New Sender Kathy Kuhlow
Re: Component failure analysis labs
Kathy Kuhlow
Thu, 27 Oct 2005 14:39:29 -0500
New Sender Kathy
Re: New IPC email forum
Kathy
Wed, 5 Oct 2005 08:19:44 -0700
wire bonding
Kathy
Tue, 11 Oct 2005 12:42:14 -0700
New Sender Kaye Clayo
Re: RoHS Process Compliant boards
Kaye Clayo
Tue, 11 Oct 2005 17:29:44 -0400
New Sender Kelly Morris
Re: Hand Soldering Long Gold Pins
Kelly Morris
Tue, 4 Oct 2005 11:16:44 -0500
Re: Hand Soldering Long Gold Pins
Kelly Morris
Tue, 4 Oct 2005 11:35:45 -0500
Re: Hand Soldering Long Gold Pins
Kelly Morris
Tue, 4 Oct 2005 11:44:31 -0500
Re: Hand Soldering Long Gold Pins
Kelly Morris
Tue, 4 Oct 2005 11:50:29 -0500
Re: New IPC email forum
Kelly Morris
Thu, 6 Oct 2005 11:04:15 -0500
Re: Steve's award
Kelly Morris
Tue, 25 Oct 2005 08:57:10 -0500
New Sender Ken
Re: TechNet working?
Ken
Mon, 24 Oct 2005 13:34:01 -0400
New Sender Kerry McMullen
Re: Assembly Documentation Question
Kerry McMullen
Mon, 10 Oct 2005 11:06:17 -0400
Re: Haloween
Kerry McMullen
Mon, 31 Oct 2005 15:31:39 -0500
Re: Has anybody seen this?
Kerry McMullen
Fri, 21 Oct 2005 09:39:21 -0400
Re: New IPC email forum
Kerry McMullen
Wed, 5 Oct 2005 11:18:15 -0400
Re: [PMX=XXIIIIII], Re: [TN] LEAD FREE PART IN SNPB PROCESS
Kerry McMullen
Fri, 28 Oct 2005 11:22:04 -0400
New Sender Kevin Glidden
Re: Assembly Documentation Question
Kevin Glidden
Fri, 7 Oct 2005 13:32:14 -0400
Re: Buss Bar Attachment Method
Kevin Glidden
Mon, 10 Oct 2005 14:45:05 -0400
Re: Class 2 Vs 3
Kevin Glidden
Mon, 17 Oct 2005 11:43:10 -0400
Glass for Wave Solder
Kevin Glidden
Tue, 11 Oct 2005 11:28:18 -0400
Re: Help needed / searching for JEDEC standard
Kevin Glidden
Thu, 20 Oct 2005 10:25:28 -0400
Re: Mixing Fluxes: Water Sol and Rosin
Kevin Glidden
Mon, 3 Oct 2005 13:41:18 -0400
Re: Mixing Fluxes: Water Sol and Rosin
Kevin Glidden
Mon, 3 Oct 2005 15:17:01 -0400
Re: Mixing Fluxes: Water Sol and Rosin
Kevin Glidden
Tue, 4 Oct 2005 09:46:14 -0400
New Sender Kevin
Mixing Fluxes: Water Sol and Rosin
Kevin
Mon, 3 Oct 2005 11:34:53 -0500
New Sender Kotecki, George
Re: CAGE codes, FedTeDS and DD2345. Oh My!
Kotecki, George
Fri, 14 Oct 2005 14:16:31 -0500
Re: MIL-P-18177
Kotecki, George
Fri, 14 Oct 2005 10:39:17 -0500
New Sender Lance Mayes
Re: Hand Soldering Long Gold Pins
Lance Mayes
Tue, 4 Oct 2005 11:53:45 -0600
Re: TechNet working?
Lance Mayes
Tue, 25 Oct 2005 08:54:38 -0600
New Sender Larry Koens
Re: Solder Stations
Larry Koens
Mon, 17 Oct 2005 08:06:39 -0500
New Sender Larson, Kevin
Re: Haloween
Larson, Kevin
Mon, 31 Oct 2005 14:41:59 -0600
Re: NTC:Friday
Larson, Kevin
Fri, 21 Oct 2005 10:22:39 -0500
New Sender Lawrence Russell
Re: New IPC email forum
Lawrence Russell
Thu, 6 Oct 2005 08:33:16 +0800
New Sender Lee parker
Re: Direct Immersion Gold
Lee parker
Wed, 12 Oct 2005 11:44:21 -0400
Re: Hasl
Lee parker
Tue, 11 Oct 2005 13:03:07 -0400
Re: Hasl
Lee parker
Tue, 11 Oct 2005 20:09:55 -0400
Re: Hasl
Lee Parker
Tue, 11 Oct 2005 22:45:01 -0400
Re: Hasl
Lee parker
Wed, 12 Oct 2005 11:33:44 -0400
Re: Hasl
Lee parker
Wed, 12 Oct 2005 13:51:26 -0400
Re: Hasl
Lee parker
Wed, 12 Oct 2005 19:47:40 -0400
Re: Levity and Whit
Lee parker
Thu, 13 Oct 2005 11:00:56 -0400
Re: Levity and Whit
Lee parker
Thu, 13 Oct 2005 11:14:53 -0400
Re: Levity and Whit
Lee parker
Thu, 13 Oct 2005 16:50:51 -0400
Re: Levity and Whit
Lee parker
Thu, 13 Oct 2005 21:03:54 -0400
Re: New IPC email forum
Lee Parker
Wed, 5 Oct 2005 12:56:59 -0400
Re: New IPC email forum
Lee parker
Wed, 5 Oct 2005 14:11:18 -0400
New Sender Leo Higgins
Re: Component failure analysis labs
Leo Higgins
Thu, 27 Oct 2005 13:31:47 -0700
Re: Delamination at Thermal Via area?
Leo Higgins
Wed, 19 Oct 2005 13:24:20 -0700
Re: Delamination at Thermal Via area?
Leo Higgins
Wed, 19 Oct 2005 14:32:06 -0700
Re: Delamination at Thermal Via area?
Leo Higgins
Wed, 19 Oct 2005 14:35:49 -0700
Re: Delamination at Thermal Via area?
Leo Higgins
Wed, 19 Oct 2005 15:35:27 -0700
Re: Delamination at Thermal Via area?
Leo Higgins
Wed, 19 Oct 2005 16:30:17 -0700
Re: Delamination at Thermal Via area?
Leo Higgins
Wed, 19 Oct 2005 17:01:15 -0700
Re: Direct Immersion Gold
Leo Higgins
Fri, 14 Oct 2005 08:27:36 -0700
Re: ENIG and brittleness
Leo Higgins
Thu, 27 Oct 2005 10:11:09 -0700
SAC reflow profile and flux vaporization
Leo Higgins
Thu, 13 Oct 2005 13:51:29 -0700
Steve's award
Leo Higgins
Mon, 24 Oct 2005 21:16:06 -0700
Re: TechNet working?
Leo Higgins
Tue, 25 Oct 2005 13:49:58 -0700
New Sender LeVesque, Andy
Need ENEPIG sources
LeVesque, Andy
Tue, 4 Oct 2005 19:57:07 -0400
Re: Need ENEPIG sources
LeVesque, Andy
Wed, 5 Oct 2005 10:54:01 -0400
New Sender Linda Langley
Re: Solder Stations
Linda Langley
Tue, 18 Oct 2005 03:13:52 -0400
Re: Solder Stations
Linda Langley
Tue, 18 Oct 2005 03:21:13 -0400
New Sender Linda.Li
Re: SV: [TN] Via in pad finished flatness-3 more questions
Linda.Li
Wed, 26 Oct 2005 10:56:57 +0800
New Sender luis gallegos
Re: Urgent! Acrylic coating
luis gallegos
Thu, 27 Oct 2005 14:15:29 -0500
New Sender Macconnell, Richard (ES)
Re: Assembly Documentation Question
Macconnell, Richard (ES)
Fri, 7 Oct 2005 10:24:41 -0700
New Sender Macko, Joe @ IEC
Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Macko, Joe @ IEC
Wed, 26 Oct 2005 07:27:40 -0700
New Sender Marcel van den Berk
Highvoltage testvoltage
Marcel van den Berk
Thu, 6 Oct 2005 13:58:29 +0200
solderjoint reliability
Marcel van den Berk
Thu, 13 Oct 2005 14:42:38 +0200
Re: solderjoint reliability
Marcel van den Berk
Fri, 14 Oct 2005 10:19:49 +0200
New Sender Matthias Mansfeld
Re: New IPC email forum
Matthias Mansfeld
Thu, 6 Oct 2005 16:47:51 +0200
New Sender Mattson, Jeffrey
Re: New IPC email forum
Mattson, Jeffrey
Thu, 6 Oct 2005 10:59:41 -0400
New Sender MattyK
corner routing
MattyK
Mon, 3 Oct 2005 17:59:01 GMT
Re: use fo high halide flux on avionics: kester 331 flux
MattyK
Mon, 3 Oct 2005 16:58:21 GMT
New Sender Mcmaster, Michael
CAGE codes, FedTeDS and DD2345. Oh My!
Mcmaster, Michael
Fri, 14 Oct 2005 12:06:32 -0700
Re: Fabricators and information passage
Mcmaster, Michael
Fri, 7 Oct 2005 13:59:19 -0700
Re: My assembly is putting out black smoke - HELP
Mcmaster, Michael
Mon, 10 Oct 2005 17:17:34 -0700
Re: New Topic
Mcmaster, Michael
Wed, 5 Oct 2005 10:47:59 -0700
New Sender Mel Parrish
610D addendum
Mel Parrish
Thu, 13 Oct 2005 12:54:45 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Mel Parrish
Mon, 3 Oct 2005 16:21:29 -0500
New Sender Michael Forrester
IAG used for keypad contacts
Michael Forrester
Mon, 24 Oct 2005 16:35:00 -0400
New Sender Michael Kuczynski
Re: 0402 spacing requirements
Michael Kuczynski
Mon, 17 Oct 2005 08:14:27 -0400
Assembly Documentation Question
Michael Kuczynski
Fri, 7 Oct 2005 12:19:13 -0400
Re: CAGE codes, FedTeDS and DD2345. Oh My!
Michael Kuczynski
Fri, 14 Oct 2005 15:42:23 -0400
New Sender Michael Sewell
Re: Selective conformal coating machine
Michael Sewell
Thu, 27 Oct 2005 12:58:05 -0500
New Sender Michelle Michelotti
Don't Wait Register Now for RoHS Compliance Webcast Curriculum!
Michelle Michelotti
Tue, 4 Oct 2005 11:23:34 -0500
New Sender Mike Buetow
Re: Has anybody seen this?
Mike Buetow
Fri, 21 Oct 2005 10:29:58 -0400
Re: New IPC email forum
Mike Buetow
Wed, 5 Oct 2005 11:17:40 -0400
Re: New IPC email forum
Mike Buetow
Thu, 6 Oct 2005 09:23:04 -0400
Re: New IPC email forum
Mike Buetow
Mon, 10 Oct 2005 18:07:23 -0400
New Sender Mike Fenner
Re: ENIG and brittleness
Mike Fenner
Thu, 27 Oct 2005 16:24:43 +0100
New Sender morand, garry
Re: Microsection
morand, garry
Fri, 7 Oct 2005 13:55:57 -0400
New Sender Mumtaz Bora
Re: New IPC email forum
Mumtaz Bora
Wed, 5 Oct 2005 09:00:48 -0700
Re: Steve's award
Mumtaz Bora
Wed, 26 Oct 2005 07:23:43 -0700
New Sender Neil Diamond
Re: New IPC email forum
Neil Diamond
Wed, 5 Oct 2005 10:32:39 -0500
New Sender No Name
Solder Stations
No Name
Fri, 14 Oct 2005 12:25:16 -0500
New Sender Ofer Cohen
Re: (NTC) ENIG and brittleness
Ofer Cohen
Thu, 27 Oct 2005 22:05:06 +0200
Re: (NTC) ENIG and brittleness
Ofer Cohen
Thu, 27 Oct 2005 22:13:37 +0200
Re: 610D addendum
Ofer Cohen
Fri, 14 Oct 2005 07:00:04 +0200
Filled vias
Ofer Cohen
Wed, 5 Oct 2005 19:06:32 +0200
Re: Filled vias
Ofer Cohen
Thu, 6 Oct 2005 08:40:32 +0200
Re: New IPC email forum
Ofer Cohen
Wed, 5 Oct 2005 18:54:11 +0200
New Sender Paul Edwards
Re: Assembly Documentation Question
Paul Edwards
Fri, 7 Oct 2005 18:39:39 -0700
Re: FW: bga image
Paul Edwards
Mon, 3 Oct 2005 12:12:48 -0700
Re: Ferrite Core Inductors Fracturing Help
Paul Edwards
Fri, 7 Oct 2005 18:35:35 -0700
New Sender Pete Lymn
Re: Hasl
Pete Lymn
Fri, 14 Oct 2005 17:14:09 +0100
Re: Hasl
Pete Lymn
Mon, 17 Oct 2005 16:58:04 +0100
New Sender Pete menuez
Re: MIL-PRT-31032 vs IPC-6012
Pete menuez
Tue, 11 Oct 2005 22:46:35 -0400
New Sender Peter Swanson
Re: Wires / Straps
Peter Swanson
Fri, 30 Sep 2005 17:18:09 +0100
New Sender Phil Nutting
(OT) RE: [TN] Mixing Fluxes: Water Sol and Rosin
Phil Nutting
Wed, 5 Oct 2005 08:04:48 -0400
Re: Assembly Documentation Question
Phil Nutting
Fri, 7 Oct 2005 13:22:56 -0400
choosing solder vendor
Phil Nutting
Tue, 18 Oct 2005 09:05:04 -0400
Re: Component failure analysis labs
Phil Nutting
Thu, 27 Oct 2005 15:17:23 -0400
Re: Ferrite Core Inductors Fracturing Help
Phil Nutting
Fri, 7 Oct 2005 13:29:48 -0400
Re: Halloween NTC
Phil Nutting
Mon, 31 Oct 2005 16:01:01 -0500
Re: Hasl
Phil Nutting
Wed, 12 Oct 2005 11:19:54 -0400
Re: Highvoltage testvoltage
Phil Nutting
Thu, 6 Oct 2005 12:39:26 -0400
Re: Mixing Fluxes: Water Sol and Rosin
Phil Nutting
Mon, 3 Oct 2005 14:34:31 -0400
Re: Mixing Fluxes: Water Sol and Rosin
Phil Nutting
Mon, 3 Oct 2005 15:48:06 -0400
Re: New IPC email forum
Phil Nutting
Wed, 5 Oct 2005 11:13:17 -0400
Re: New Topic
Phil Nutting
Wed, 5 Oct 2005 12:04:31 -0400
Re: NTC:
Phil Nutting
Thu, 13 Oct 2005 11:02:48 -0400
RoHS Process Compliant boards
Phil Nutting
Tue, 11 Oct 2005 11:27:52 -0400
SAC 305 versus Sn100C
Phil Nutting
Tue, 11 Oct 2005 15:13:35 -0400
Re: SAC 305 versus Sn100C
Phil Nutting
Tue, 11 Oct 2005 16:15:52 -0400
Re: SAC 305 versus Sn100C
Phil Nutting
Wed, 12 Oct 2005 08:19:18 -0400
Re: SMT solderability evaluation PCB???
Phil Nutting
Thu, 27 Oct 2005 15:15:17 -0400
Re: Solder Sleeves
Phil Nutting
Wed, 26 Oct 2005 15:43:43 -0400
Re: Solder Sleeves
Phil Nutting
Wed, 26 Oct 2005 16:34:01 -0400
Re: Solder Stations
Phil Nutting
Mon, 17 Oct 2005 09:09:20 -0400
New Sender Phil Zarrow
New IPC email forum
Phil Zarrow
Thu, 6 Oct 2005 10:51:33 EDT
New Sender Phillip Bavaro
Re: BGA Reballing Services
Phillip Bavaro
Sun, 30 Oct 2005 11:42:56 -0800
Re: Ferrite Core Inductors Fracturing Help
Phillip Bavaro
Tue, 11 Oct 2005 14:16:27 -0700
Re: LEAD FREE PART IN SNPB PROCESS
Phillip Bavaro
Fri, 28 Oct 2005 14:28:03 -0700
Re: Solder Protrusions
Phillip Bavaro
Tue, 4 Oct 2005 20:22:08 -0700
Re: Solder Protrusions
Phillip Bavaro
Fri, 7 Oct 2005 18:01:39 -0700
Re: Solder Stations
Phillip Bavaro
Fri, 14 Oct 2005 20:37:02 -0700
Re: Stycast E-151-3
Phillip Bavaro
Thu, 27 Oct 2005 16:28:18 -0700
Re: SV: [TN] Urgent! Acrylic coating
Phillip Bavaro
Thu, 27 Oct 2005 12:42:48 -0700
New Sender Prakash Sowndappan
Re: Cognex Vision Card Repair Update...
Prakash Sowndappan
Fri, 28 Oct 2005 09:23:37 -0500
Re: Cognex Vision Card Repair Update...
Prakash Sowndappan
Sat, 29 Oct 2005 22:09:26 -0500
New Sender prasad godavarti
Re: New IPC email forum
prasad godavarti
Fri, 7 Oct 2005 10:29:25 -0700
use fo high halide flux on avionics: kester 331 flux
prasad godavarti
Sun, 2 Oct 2005 09:56:16 -0700
New Sender R Sedlak
Attracting Fabricators
R Sedlak
Thu, 6 Oct 2005 11:24:49 -0700
Electrolytic Tin Plating for fabricators
R Sedlak
Fri, 14 Oct 2005 16:51:25 -0700
Fabricators and information passage
R Sedlak
Thu, 6 Oct 2005 15:19:59 -0700
Re: Fabricators and information passage
R Sedlak
Fri, 7 Oct 2005 09:35:28 -0700
Re: Gold Plating Peeling...
R Sedlak
Fri, 28 Oct 2005 12:56:02 -0700
Hasl height variation
R Sedlak
Wed, 12 Oct 2005 16:03:41 -0700
More Electrolytic Tin Plating
R Sedlak
Mon, 17 Oct 2005 18:29:00 -0700
Re: More Electrolytic Tin Plating
R Sedlak
Tue, 18 Oct 2005 06:33:55 -0700
Re: Removing oxide from silver flakes.
R Sedlak
Fri, 21 Oct 2005 13:32:47 -0700
Re: Steve's award
R Sedlak
Tue, 25 Oct 2005 05:48:01 -0700
Re: Steve's award
R Sedlak
Tue, 25 Oct 2005 13:17:06 -0700
Re: Via in pad finished flatness
R Sedlak
Tue, 25 Oct 2005 13:13:15 -0700
Re: wire bonding
R Sedlak
Wed, 12 Oct 2005 11:57:00 -0700
wire bonding - ENIG and ENEPIG
R Sedlak
Wed, 12 Oct 2005 09:07:00 -0700
New Sender Randy Bock Sr.
Re: Gold Plating Peeling...
Randy Bock Sr.
Fri, 28 Oct 2005 11:47:48 -0400
Re: NTC:Friday
Randy Bock Sr.
Fri, 21 Oct 2005 14:17:27 -0400
Randall L Bock/MSD/US/PBI is out of the office.
Randy Bock Sr.
Wed, 12 Oct 2005 00:42:51 -0400
Randall L Bock/MSD/US/PBI is out of the office.
Randy Bock Sr.
Fri, 14 Oct 2005 08:26:42 -0400
Re: TechNet working?
Randy Bock Sr.
Mon, 24 Oct 2005 13:32:57 -0400
New Sender Ray, Carl (GE Infrastructure)
Re: ENIG and brittleness
Ray, Carl (GE Infrastructure)
Thu, 27 Oct 2005 09:22:22 -0400
New Sender Reuven ROKAH
Re: 610D addendum
Reuven ROKAH
Sun, 16 Oct 2005 08:18:37 +0300
Re: Male female dies
Reuven ROKAH
Wed, 26 Oct 2005 10:03:32 +0200
Re: New IPC email forum
Reuven ROKAH
Thu, 6 Oct 2005 11:04:57 +0300
New Sender RICHARD FUDALEWSKI
ENIG
RICHARD FUDALEWSKI
Thu, 13 Oct 2005 13:06:59 -0400
Re: Hasl
RICHARD FUDALEWSKI
Thu, 13 Oct 2005 07:01:46 -0400
Re: NTC:
RICHARD FUDALEWSKI
Thu, 13 Oct 2005 12:19:08 -0400
New Sender Richard Kraszewski
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Richard Kraszewski
Wed, 26 Oct 2005 11:19:42 -0500
Re: Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Richard Kraszewski
Wed, 26 Oct 2005 11:30:50 -0500
New Sender Rick Pfeiffer
Re: New IPC email forum
Rick Pfeiffer
Wed, 5 Oct 2005 11:25:11 -0400
New Sender Roach, David
Component failure analysis labs
Roach, David
Thu, 27 Oct 2005 14:11:39 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Roach, David
Tue, 4 Oct 2005 10:06:08 -0500
Re: My assembly is putting out black smoke - HELP
Roach, David
Fri, 7 Oct 2005 16:13:35 -0500
Re: New Topic
Roach, David
Thu, 6 Oct 2005 08:17:27 -0500
TechNet working?
Roach, David
Mon, 24 Oct 2005 12:28:26 -0500
New Sender Robert Coburn
Re: New IPC email forum
Robert Coburn
Wed, 5 Oct 2005 11:19:50 -0400
New Sender Roger Battles
Re: Solder Stations
Roger Battles
Mon, 17 Oct 2005 07:27:42 -0700
Re: Solder Stations
Roger Battles
Mon, 17 Oct 2005 07:30:12 -0700
New Sender Roger Mouton
Re: New IPC email forum
Roger Mouton
Wed, 5 Oct 2005 18:37:32 +0000
New Sender Roger Stoops
Re: Ferrite Core Inductors Fracturing Help
Roger Stoops
Fri, 7 Oct 2005 13:04:36 -0400
Re: Ferrite Core Inductors Fracturing Help
Roger Stoops
Fri, 7 Oct 2005 14:53:52 -0400
Re: New IPC email forum
Roger Stoops
Wed, 5 Oct 2005 11:35:29 -0400
Re: New IPC email forum
Roger Stoops
Fri, 7 Oct 2005 09:33:09 -0400
Re: New Old Topic
Roger Stoops
Thu, 6 Oct 2005 13:23:17 -0400
New Sender Roger Tingler
Re: New Topic
Roger Tingler
Wed, 5 Oct 2005 12:22:24 -0400
New Sender Roland Dollinger
Antwort: Re: [TN] SAC 305 versus Sn100C
Roland Dollinger
Thu, 13 Oct 2005 14:25:15 +0200
New Sender Roland Jaquet
Re: New IPC email forum
Roland Jaquet
Thu, 6 Oct 2005 13:48:37 +0200
New Sender Russell Burdick
Re: Microsection
Russell Burdick
Fri, 7 Oct 2005 06:45:33 -0700
Re: TechNet working?
Russell Burdick
Tue, 25 Oct 2005 10:26:19 -0700
New Sender Ryan Grant
Direct Immersion Gold
Ryan Grant
Wed, 12 Oct 2005 09:34:06 -0600
Re: Direct Immersion Gold
Ryan Grant
Fri, 14 Oct 2005 08:23:11 -0600
New Sender Schaefer, Chris
Re: SAC 305 versus Sn100C
Schaefer, Chris
Tue, 11 Oct 2005 15:46:43 -0500
Re: Selective conformal coating machine
Schaefer, Chris
Thu, 27 Oct 2005 12:11:45 -0500
Re: Urgent! Acrylic coating
Schaefer, Chris
Thu, 27 Oct 2005 10:58:20 -0500
New Sender shoukai zhang
PBGA soldejoint open , what's the max. ramp up rate requirement of wave soldering?--
shoukai zhang
Wed, 19 Oct 2005 20:55:19 +0800
New Sender Smith, Richard
Re: New IPC email forum
Smith, Richard
Thu, 6 Oct 2005 16:53:02 -0400
New Sender Sri Maganti
0402 spacing requirements
Sri Maganti
Fri, 14 Oct 2005 17:07:53 -0500
New Sender Stadem, Richard
(tn)(pwb) When do you need to bake a circuit board prior to assembly? Are there standards?
Stadem, Richard
Mon, 10 Oct 2005 09:33:57 -0500
Re: (tn)(pwb) When do you need to bake a circuit board prior to assembly? Are there standards?
Stadem, Richard
Mon, 10 Oct 2005 10:36:53 -0500
Re: <List>[TN] Friday in paradise
Stadem, Richard
Fri, 14 Oct 2005 13:38:05 -0500
Re: Assembly Documentation Question
Stadem, Richard
Mon, 10 Oct 2005 08:19:44 -0500
Re: BGA failure and assembly repair
Stadem, Richard
Fri, 28 Oct 2005 08:48:22 -0500
Re: Buss Bar Attachment Method
Stadem, Richard
Mon, 10 Oct 2005 16:03:29 -0500
Re: Component failure analysis labs
Stadem, Richard
Thu, 27 Oct 2005 15:20:53 -0500
Re: Component failure analysis labs
Stadem, Richard
Thu, 27 Oct 2005 16:02:03 -0500
Re: Copper Ductility Characterization
Stadem, Richard
Tue, 4 Oct 2005 14:25:56 -0500
Re: Delamination at Thermal Via area?
Stadem, Richard
Wed, 19 Oct 2005 13:21:11 -0500
Re: Dwell Time
Stadem, Richard
Thu, 6 Oct 2005 14:47:39 -0500
Re: ENIG and brittleness
Stadem, Richard
Wed, 26 Oct 2005 12:58:32 -0500
Re: Gold Plating Peeling...
Stadem, Richard
Fri, 28 Oct 2005 13:41:39 -0500
Re: Halloween NTC
Stadem, Richard
Mon, 31 Oct 2005 15:10:59 -0600
Re: Haloween
Stadem, Richard
Mon, 31 Oct 2005 14:40:24 -0600
Re: Haloween
Stadem, Richard
Mon, 31 Oct 2005 14:43:31 -0600
Re: Haloween
Stadem, Richard
Mon, 31 Oct 2005 15:12:42 -0600
Re: Hasl
Stadem, Richard
Tue, 11 Oct 2005 13:02:34 -0500
Re: Hasl
Stadem, Richard
Wed, 12 Oct 2005 08:52:48 -0500
Re: Hasl
Stadem, Richard
Wed, 12 Oct 2005 10:29:10 -0500
Re: Hasl
Stadem, Richard
Wed, 12 Oct 2005 12:28:33 -0500
Re: Hasl
Stadem, Richard
Wed, 12 Oct 2005 16:12:22 -0500
Re: Hasl
Stadem, Richard
Thu, 13 Oct 2005 10:13:49 -0500
Re: LEAD FREE PART IN SNPB PROCESS
Stadem, Richard
Fri, 28 Oct 2005 13:46:09 -0500
Re: LEAD FREE PART IN SNPB PROCESS
Stadem, Richard
Mon, 31 Oct 2005 07:17:47 -0600
Re: Microscopes
Stadem, Richard
Wed, 5 Oct 2005 13:22:20 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Stadem, Richard
Tue, 4 Oct 2005 14:32:59 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Stadem, Richard
Tue, 4 Oct 2005 14:57:30 -0500
Re: Mixing Fluxes: Water Sol and Rosin
Stadem, Richard
Wed, 5 Oct 2005 06:48:24 -0500
Re: New IPC email forum
Stadem, Richard
Wed, 5 Oct 2005 12:50:27 -0500
Re: New Old Topic
Stadem, Richard
Thu, 6 Oct 2005 14:52:44 -0500
Re: New Old Topic
Stadem, Richard
Thu, 6 Oct 2005 15:32:25 -0500
Re: New Old Topic
Stadem, Richard
Mon, 10 Oct 2005 07:09:16 -0500
Re: PCB Score Depth
Stadem, Richard
Thu, 6 Oct 2005 09:51:43 -0500
Re: Revisions
Stadem, Richard
Mon, 10 Oct 2005 15:34:52 -0500
Re: SMT solderability evaluation PCB???
Stadem, Richard
Thu, 27 Oct 2005 15:24:20 -0500
Re: Solder Protrusions
Stadem, Richard
Thu, 6 Oct 2005 14:54:39 -0500
Re: Solder Sleeves
Stadem, Richard
Wed, 26 Oct 2005 15:00:13 -0500
Re: Solder Stations
Stadem, Richard
Mon, 17 Oct 2005 09:26:12 -0500
Re: Solder Stations
Stadem, Richard
Tue, 18 Oct 2005 06:42:34 -0500
Re: solderjoint reliability
Stadem, Richard
Thu, 13 Oct 2005 13:04:57 -0500
Re: SV: [TN] Voids in BGAs, again
Stadem, Richard
Thu, 20 Oct 2005 09:09:45 -0500
Re: SV: [TN] [DC] 2006 - Year of the PCB Designer
Stadem, Richard
Wed, 26 Oct 2005 08:54:53 -0500
Re: TechNet working?
Stadem, Richard
Tue, 25 Oct 2005 09:37:23 -0500
Re: use fo high halide flux on avionics: kester 331 flux
Stadem, Richard
Mon, 3 Oct 2005 06:53:14 -0500
Re: use fo high halide flux on avionics: kester 331 flux
Stadem, Richard
Mon, 3 Oct 2005 09:48:06 -0500
Re: Voids in BGAs, again
Stadem, Richard
Mon, 17 Oct 2005 09:15:41 -0500
Re: Voids in BGAs, again
Stadem, Richard
Tue, 18 Oct 2005 07:13:58 -0500
Re: Voids in BGAs, again
Stadem, Richard
Tue, 18 Oct 2005 08:01:46 -0500
Re: wire bonding
Stadem, Richard
Wed, 12 Oct 2005 12:41:43 -0500
Re: [NTC] Friday in paradise
Stadem, Richard
Mon, 17 Oct 2005 09:27:06 -0500
New Sender stephen gregory
Re: Microsection
stephen gregory
Fri, 7 Oct 2005 03:56:06 -0700
Re: mil-p-55110 d/e
stephen gregory
Mon, 10 Oct 2005 05:17:12 -0700
Re: mil-p-55110 d/e
stephen gregory
Mon, 10 Oct 2005 05:45:01 -0700
New Sender Stephen R Gregory
Re: Cognex Vision Card Repair Update...
Stephen R Gregory
Fri, 28 Oct 2005 10:59:25 -0500
Re: Delamination at Thermal Via area?
Stephen R Gregory
Wed, 19 Oct 2005 09:29:33 -0500
Re: Ferrite Core Inductors Fracturing Help
Stephen R Gregory
Fri, 7 Oct 2005 12:52:53 -0500
Re: Hand Soldering Long Gold Pins
Stephen R Gregory
Tue, 4 Oct 2005 11:26:18 -0500
Re: MIL-P-18177
Stephen R Gregory
Fri, 14 Oct 2005 10:21:43 -0500
Re: NTC... Fans and Air Movers
Stephen R Gregory
Tue, 18 Oct 2005 07:14:18 -0500
Re: NTC...New IPC email forum
Stephen R Gregory
Wed, 5 Oct 2005 13:29:59 -0500
Re: NTC:Friday
Stephen R Gregory
Fri, 21 Oct 2005 13:05:40 -0500
Re: Sedition
Stephen R Gregory
Thu, 6 Oct 2005 12:00:40 -0500
Re: Solder Stations
Stephen R Gregory
Mon, 17 Oct 2005 10:05:13 -0500
Re: SV: [TN] Electrolytic Tin Plating
Stephen R Gregory
Mon, 17 Oct 2005 07:39:18 -0500
Re: SV: [TN] Voids in BGAs, again
Stephen R Gregory
Tue, 18 Oct 2005 14:11:45 -0500
Re: Urgent! Acrylic coating
Stephen R Gregory
Mon, 31 Oct 2005 09:15:57 -0600
Re: Voids in BGAs, again
Stephen R Gregory
Mon, 17 Oct 2005 11:04:41 -0500
Re: Voids in BGAs, again
Stephen R Gregory
Tue, 18 Oct 2005 07:58:58 -0500
New Sender Steve Gregory
Re: Cognex Vision Card Repair Update...
Steve Gregory
Fri, 28 Oct 2005 10:59:25 -0500
Re: Delamination at Thermal Via area?
Steve Gregory
Wed, 19 Oct 2005 09:29:33 -0500
Re: Delamination at Thermal Via area?
Steve Gregory
Wed, 19 Oct 2005 12:48:53 -0500
Re: Delamination at Thermal Via area?
Steve Gregory
Wed, 19 Oct 2005 16:19:50 -0500
Re: Ferrite Core Inductors Fracturing Help
Steve Gregory
Fri, 7 Oct 2005 12:52:53 -0500
Re: Ferrite Core Inductors Fracturing Help
Steve Gregory
Fri, 7 Oct 2005 14:10:49 -0500
Gold Plating Peeling...
Steve Gregory
Fri, 28 Oct 2005 10:37:16 -0500
Re: Hand Soldering Long Gold Pins
Steve Gregory
Tue, 4 Oct 2005 11:26:18 -0500
Re: Hand Soldering Long Gold Pins
Steve Gregory
Tue, 4 Oct 2005 12:30:10 -0500
Has anybody seen this?
Steve Gregory
Fri, 21 Oct 2005 08:28:50 -0500
Microsectioning equipment...
Steve Gregory
Tue, 4 Oct 2005 08:24:46 -0500
Re: NTC... Fans and Air Movers
Steve Gregory
Tue, 18 Oct 2005 07:14:18 -0500
Re: NTC:Friday
Steve Gregory
Fri, 21 Oct 2005 13:05:40 -0500
Re: Sedition
Steve Gregory
Thu, 6 Oct 2005 12:00:40 -0500
Re: Solder Stations
Steve Gregory
Mon, 17 Oct 2005 10:05:13 -0500
Re: SV: [TN] Electrolytic Tin Plating
Steve Gregory
Mon, 17 Oct 2005 07:39:18 -0500
Re: SV: [TN] Voids in BGAs, again
Steve Gregory
Tue, 18 Oct 2005 14:11:45 -0500
Re: TechNet working?
Steve Gregory
Mon, 24 Oct 2005 22:47:16 -0500
Re: Urgent! Acrylic coating
Steve Gregory
Fri, 28 Oct 2005 08:07:15 -0500
Re: Urgent! Acrylic coating
Steve Gregory
Mon, 31 Oct 2005 09:15:57 -0600
Re: Voids in BGAs, again
Steve Gregory
Mon, 17 Oct 2005 11:04:41 -0500
Re: Voids in BGAs, again
Steve Gregory
Tue, 18 Oct 2005 07:58:58 -0500
New Sender Steve Hodge
Re: <List>Re: [TN] <List>Re: [TN] New Old Topic
Steve Hodge
Fri, 7 Oct 2005 09:14:27 -0600
Re: <List>Re: [TN] Electrolytic Tin Plating
Steve Hodge
Fri, 14 Oct 2005 13:50:22 -0600
Re: <List>Re: [TN] Hasl
Steve Hodge
Wed, 12 Oct 2005 07:40:01 -0600
Re: <List>Re: [TN] New Old Topic
Steve Hodge
Thu, 6 Oct 2005 15:08:46 -0600
Re: <List>[TN] Electrolytic Tin Plating
Steve Hodge
Fri, 14 Oct 2005 09:47:32 -0600
Re: <List>[TN] Friday in paradise
Steve Hodge
Fri, 14 Oct 2005 12:05:56 -0600
Re: <List>[TN] Gold Plating Peeling...
Steve Hodge
Fri, 28 Oct 2005 09:46:22 -0600
Re: <List>[TN] Omegameter to IPC-TM-650, Method 2.3.25 cross reference
Steve Hodge
Wed, 26 Oct 2005 08:29:19 -0600
Re: <List>[TN] RoHS Process Compliant boards
Steve Hodge
Tue, 11 Oct 2005 11:18:21 -0600
Re: <List>[TN] wire bonding
Steve Hodge
Tue, 11 Oct 2005 13:39:20 -0600
New Sender Steve Kelly
Male female dies
Steve Kelly
Mon, 24 Oct 2005 17:40:31 -0400
New Sender Susan C. James
Re: New IPC email forum
Susan C. James
Wed, 5 Oct 2005 13:27:04 -0500
New Sender Susan Mansilla
Re: Copper Ductility Characterization
Susan Mansilla
Tue, 4 Oct 2005 13:30:24 EDT
LEAD FREE PART IN SNPB PROCESS
Susan Mansilla
Fri, 28 Oct 2005 11:08:25 EDT
Re: Microsection
Susan Mansilla
Fri, 7 Oct 2005 09:22:53 EDT
Re: New IPC email forum
Susan Mansilla
Wed, 5 Oct 2005 11:26:46 EDT
New Sender Syed Sajid Ahmad
Removing oxide from silver flakes.
Syed Sajid Ahmad
Fri, 21 Oct 2005 13:52:03 -0500
New Sender TDK
Re: Assembly Documentation Question
TDK
Tue, 11 Oct 2005 06:29:33 -0600
Re: New IPC email forum
TDK
Wed, 5 Oct 2005 09:08:29 -0600
Re: New IPC email forum
TDK
Wed, 5 Oct 2005 10:48:52 -0600
New Sender Ted Edwards
Small Hole Microsectiooning Equipmant
Ted Edwards
Sun, 16 Oct 2005 17:26:49 -0700
New Sender Ted Tontis
Re: SAC 305 versus Sn100C
Ted Tontis
Tue, 11 Oct 2005 16:46:20 -0500
New Sender Tempea, Ioan
Re: Help needed / searching for JEDEC standard
Tempea, Ioan
Thu, 20 Oct 2005 10:18:20 -0400
Re: LEAD FREE PART IN SNPB PROCESS
Tempea, Ioan
Fri, 28 Oct 2005 11:28:22 -0400
Voids in BGAs, again
Tempea, Ioan
Mon, 17 Oct 2005 09:02:59 -0400
Re: Voids in BGAs, again
Tempea, Ioan
Tue, 18 Oct 2005 08:31:51 -0400
New Sender Terry Halsey
Re: New IPC email forum
Terry Halsey
Fri, 7 Oct 2005 07:40:01 +0100
New Sender Terry Quinn
Stycast E-151-3
Terry Quinn
Thu, 27 Oct 2005 15:28:00 -0500
New Sender Tom Braswell
RF Design Consideration for Connectors
Tom Braswell
Thu, 6 Oct 2005 09:16:49 -0400
New Sender Tom Burek
Re: Highvoltage testvoltage
Tom Burek
Thu, 6 Oct 2005 14:11:54 -0600
Re: Highvoltage testvoltage
Tom Burek
Fri, 7 Oct 2005 10:38:26 -0400
Re: New Old Topic
Tom Burek
Fri, 7 Oct 2005 08:58:57 -0600
New Sender Tom Oliver
Ferrite Core Inductors Fracturing Help
Tom Oliver
Fri, 7 Oct 2005 12:52:35 -0400
Re: Ferrite Core Inductors Fracturing Help
Tom Oliver
Fri, 7 Oct 2005 13:27:09 -0400
New Sender Valerie St.Cyr
Re: <List>Re: [TN] New Old Topic
Valerie St.Cyr
Fri, 7 Oct 2005 10:56:51 -0400
Re: Fabricators and information passage
Valerie St.Cyr
Fri, 7 Oct 2005 11:25:34 -0400
Re: Hasl
Valerie St.Cyr
Wed, 12 Oct 2005 10:45:00 -0400
Re: Hasl
Valerie St.Cyr
Wed, 12 Oct 2005 17:35:01 -0400
Re: Hasl
Valerie St.Cyr
Wed, 12 Oct 2005 18:24:48 -0400
Re: New Old Topic
Valerie St.Cyr
Thu, 6 Oct 2005 16:15:15 -0400
Re: New Topic
Valerie St.Cyr
Fri, 7 Oct 2005 09:53:58 -0400
NTC:
Valerie St.Cyr
Thu, 13 Oct 2005 10:38:28 -0400
Re: NTC:
Valerie St.Cyr
Thu, 13 Oct 2005 11:21:32 -0400
New Sender Vargas, Stephen M
More on Delamination
Vargas, Stephen M
Thu, 20 Oct 2005 08:18:19 -0400
New Sender Victor G. Hernandez
Re: Microscopes
Victor G. Hernandez
Thu, 6 Oct 2005 07:28:44 -0500
Re: Microsection
Victor G. Hernandez
Fri, 7 Oct 2005 08:46:18 -0500
Re: Microsectioning equipment...
Victor G. Hernandez
Tue, 4 Oct 2005 16:34:02 -0500
New Sender Vladimir Igoshev
Re: Copper Ductility Characterization
Vladimir Igoshev
Tue, 4 Oct 2005 12:14:27 -0400
Re: ENIG and brittleness
Vladimir Igoshev
Wed, 26 Oct 2005 13:51:57 -0400
Re: ENIG and brittleness
Vladimir Igoshev
Thu, 27 Oct 2005 11:07:24 -0400
Re: Microscopes
Vladimir Igoshev
Wed, 5 Oct 2005 13:57:45 -0400
Re: New IPC email forum
Vladimir Igoshev
Wed, 5 Oct 2005 11:10:32 -0400
New Sender Wee Mei
Delamination at Thermal Via area?
Wee Mei
Wed, 19 Oct 2005 16:47:17 +0800
Re: Delamination at Thermal Via area?
Wee Mei
Thu, 20 Oct 2005 13:36:31 +0800
Re: Delamination at Thermal Via area?
Wee Mei
Thu, 20 Oct 2005 16:41:06 +0800
Re: Steve's award
Wee Mei
Tue, 25 Oct 2005 13:46:27 +0800
New Sender Wenger, George M.
Re: Delamination at Thermal Via area?
Wenger, George M.
Wed, 19 Oct 2005 12:00:07 -0400
Re: Delamination at Thermal Via area?
Wenger, George M.
Wed, 19 Oct 2005 16:56:57 -0400
Re: Hasl
Wenger, George M.
Wed, 12 Oct 2005 11:10:35 -0400
Re: Hasl
Wenger, George M.
Wed, 12 Oct 2005 11:12:50 -0400
Re: Hasl
Wenger, George M.
Wed, 12 Oct 2005 13:44:01 -0400
Re: Microsection
Wenger, George M.
Fri, 7 Oct 2005 09:30:07 -0400
Re: Mixing Fluxes: Water Sol and Rosin
Wenger, George M.
Mon, 3 Oct 2005 13:42:54 -0400
Re: New IPC email forum
Wenger, George M.
Wed, 5 Oct 2005 12:05:37 -0400
Re: SAC 305 versus Sn100C
Wenger, George M.
Tue, 11 Oct 2005 16:46:48 -0400
Re: SAC 305 versus Sn100C
Wenger, George M.
Tue, 11 Oct 2005 20:48:04 -0400
New Sender Werner Engelmaier
Re: 610D addendum
Werner Engelmaier
Fri, 14 Oct 2005 08:15:04 EDT
Re: BGA failure and assembly repair
Werner Engelmaier
Fri, 28 Oct 2005 09:47:40 EDT
Re: Copper Ductility Characterization
Werner Engelmaier
Tue, 4 Oct 2005 10:40:12 EDT
Re: Copper Ductility Characterization
Werner Engelmaier
Tue, 4 Oct 2005 11:50:57 EDT
Re: Delamination at Thermal Via area?
Werner Engelmaier
Wed, 19 Oct 2005 16:35:04 EDT
Re: Delamination at Thermal Via area?
Werner Engelmaier
Wed, 19 Oct 2005 16:44:47 EDT
Re: Delamination at Thermal Via area?
Werner Engelmaier
Wed, 19 Oct 2005 19:15:10 EDT
Re: Delamination at Thermal Via area?
Werner Engelmaier
Wed, 19 Oct 2005 19:40:58 EDT
Re: Dwell Time
Werner Engelmaier
Thu, 6 Oct 2005 15:09:38 EDT
Re: Dwell Time
Werner Engelmaier
Thu, 6 Oct 2005 17:34:49 EDT
E-mail address
Werner Engelmaier
Tue, 18 Oct 2005 15:22:01 EDT
Re: ENIG and brittleness
Werner Engelmaier
Thu, 27 Oct 2005 00:25:04 EDT
Re: Ferrite Core Inductors Fracturing Help
Werner Engelmaier
Fri, 7 Oct 2005 17:44:51 EDT
Re: Filled vias
Werner Engelmaier
Wed, 5 Oct 2005 12:17:24 EDT
Re: Hasl
Werner Engelmaier
Wed, 12 Oct 2005 13:21:18 -0400
Re: Hasl
Werner Engelmaier
Wed, 12 Oct 2005 17:29:14 -0400
Re: Hasl
Werner Engelmaier
Wed, 12 Oct 2005 17:59:29 -0400
Re: Hasl
Werner Engelmaier
Wed, 12 Oct 2005 18:04:41 -0400
Re: Hasl
Werner Engelmaier
Wed, 12 Oct 2005 18:05:08 -0400
Re: Hasl
Werner Engelmaier
Wed, 12 Oct 2005 18:08:41 -0400
Re: Hasl
Werner Engelmaier
Thu, 13 Oct 2005 03:04:09 -0400
Re: IPC7351 Questions
Werner Engelmaier
Mon, 3 Oct 2005 23:30:11 EDT
Re: IPC7351 Questions
Werner Engelmaier
Tue, 4 Oct 2005 10:43:10 EDT
Re: LEAD FREE PART IN SNPB PROCESS
Werner Engelmaier
Fri, 28 Oct 2005 20:14:42 EDT
Re: LEAD FREE PART IN SNPB PROCESS
Werner Engelmaier
Fri, 28 Oct 2005 20:17:02 EDT
Re: LEAD FREE PART IN SNPB PROCESS
Werner Engelmaier
Fri, 28 Oct 2005 20:23:39 EDT
Re: Levity and Whit
Werner Engelmaier
Thu, 13 Oct 2005 12:59:19 -0400
Re: Levity and Whit
Werner Engelmaier
Thu, 13 Oct 2005 13:07:20 -0400
Re: Levity and Whit
Werner Engelmaier
Thu, 13 Oct 2005 13:48:16 -0400
Re: Levity and Whit
Werner Engelmaier
Thu, 13 Oct 2005 17:02:16 EDT
Re: Microsectioning equipment...NTC
Werner Engelmaier
Tue, 4 Oct 2005 10:47:11 EDT
Re: Minimum shear strength values for 30/24 mil Sn63 solder balls
Werner Engelmaier
Tue, 18 Oct 2005 20:51:30 EDT
Re: Mixing Fluxes: Water Sol and Rosin
Werner Engelmaier
Tue, 4 Oct 2005 15:48:56 EDT
Re: Mixing Fluxes: Water Sol and Rosin
Werner Engelmaier
Tue, 4 Oct 2005 16:30:29 EDT
Re: Mixing Fluxes: Water Sol and Rosin
Werner Engelmaier
Tue, 4 Oct 2005 16:30:55 EDT
Re: More on Delamination
Werner Engelmaier
Thu, 20 Oct 2005 09:26:25 EDT
Re: New IPC email forum
Werner Engelmaier
Wed, 5 Oct 2005 11:34:55 EDT
Re: New Old Topic
Werner Engelmaier
Thu, 6 Oct 2005 17:51:38 EDT
Re: New Old Topic
Werner Engelmaier
Thu, 6 Oct 2005 19:35:23 EDT
Re: PCB specification / Automotive / incoming inspection
Werner Engelmaier
Mon, 17 Oct 2005 11:30:20 -0400
Re: PWB challenges
Werner Engelmaier
Fri, 14 Oct 2005 08:18:27 EDT
Re: SV: [TN] LEAD FREE PART IN SNPB PROCESS
Werner Engelmaier
Sun, 30 Oct 2005 13:46:13 EST
Re: TechNet working?
Werner Engelmaier
Tue, 25 Oct 2005 01:50:42 EDT
Re: TechNet working?
Werner Engelmaier
Tue, 25 Oct 2005 01:54:07 EDT
Re: Voids in BGAs, again
Werner Engelmaier
Mon, 17 Oct 2005 11:41:19 -0400
Re: Voids in BGAs, again
Werner Engelmaier
Tue, 18 Oct 2005 14:52:31 EDT
Re: Voids in BGAs, again
Werner Engelmaier
Tue, 18 Oct 2005 14:56:24 EDT
Re: Voids in BGAs, again
Werner Engelmaier
Tue, 18 Oct 2005 15:14:57 EDT
Re: Voids in BGAs, again
Werner Engelmaier
Tue, 18 Oct 2005 15:55:15 EDT
Re: [LF] Leadfree Processing temp requirement
Werner Engelmaier
Thu, 13 Oct 2005 16:15:20 EDT
New Sender Whittaker, Dewey (AZ75)
Re: <List>Re: [TN] <List>Re: [TN] New Old Topic
Whittaker, Dewey (AZ75)
Fri, 7 Oct 2005 08:59:08 -0700
Re: Assembly Documentation Question
Whittaker, Dewey (AZ75)
Fri, 7 Oct 2005 10:46:17 -0700
Re: Delamination at Thermal Via area?
Whittaker, Dewey (AZ75)
Wed, 19 Oct 2005 12:13:55 -0700
Re: Delamination at Thermal Via area?
Whittaker, Dewey (AZ75)
Wed, 19 Oct 2005 12:49:44 -0700
Re: Haloween
Whittaker, Dewey (AZ75)
Mon, 31 Oct 2005 13:39:44 -0700
Re: Haloween
Whittaker, Dewey (AZ75)
Mon, 31 Oct 2005 13:52:00 -0700
Re: Hasl
Whittaker, Dewey (AZ75)
Wed, 12 Oct 2005 11:05:17 -0700
Keeping in the spirit of things
Whittaker, Dewey (AZ75)
Tue, 4 Oct 2005 12:57:32 -0700
Re: Mixing Fluxes: Water Sol and Rosin
Whittaker, Dewey (AZ75)
Tue, 4 Oct 2005 07:18:51 -0700
Re: Mixing Fluxes: Water Sol and Rosin
Whittaker, Dewey (AZ75)
Tue, 4 Oct 2005 13:03:23 -0700
Re: Mixing Fluxes: Water Sol and Rosin
Whittaker, Dewey (AZ75)
Tue, 4 Oct 2005 14:07:41 -0700
Re: New IPC email forum
Whittaker, Dewey (AZ75)
Wed, 5 Oct 2005 08:18:25 -0700
Re: New IPC email forum
Whittaker, Dewey (AZ75)
Wed, 5 Oct 2005 08:37:59 -0700
Re: New IPC email forum
Whittaker, Dewey (AZ75)
Wed, 5 Oct 2005 10:51:21 -0700
Re: New IPC email forum
Whittaker, Dewey (AZ75)
Thu, 6 Oct 2005 06:37:39 -0700
Re: New IPC email forum
Whittaker, Dewey (AZ75)
Thu, 6 Oct 2005 06:49:20 -0700
Re: New IPC email forum
Whittaker, Dewey (AZ75)
Fri, 7 Oct 2005 07:12:57 -0700
Re: New Topic
Whittaker, Dewey (AZ75)
Wed, 5 Oct 2005 09:04:39 -0700
Re: NTC:
Whittaker, Dewey (AZ75)
Thu, 13 Oct 2005 12:42:15 -0700
Re: NTC:Friday
Whittaker, Dewey (AZ75)
Mon, 31 Oct 2005 13:26:49 -0700
Re: RoHS - scary tin whiskers
Whittaker, Dewey (AZ75)
Tue, 11 Oct 2005 11:42:09 -0700
Re: RoHS Process Compliant boards
Whittaker, Dewey (AZ75)
Tue, 11 Oct 2005 09:35:36 -0700
Re: Sedition
Whittaker, Dewey (AZ75)
Thu, 6 Oct 2005 09:00:56 -0700
Re: Solder Stations
Whittaker, Dewey (AZ75)
Mon, 17 Oct 2005 08:45:27 -0700
Re: Solder Stations
Whittaker, Dewey (AZ75)
Mon, 17 Oct 2005 11:27:33 -0700
Re: Solder Stations
Whittaker, Dewey (AZ75)
Mon, 17 Oct 2005 12:50:59 -0700
Re: Solder Stations
Whittaker, Dewey (AZ75)
Mon, 17 Oct 2005 15:36:07 -0700
Re: TechNet working?
Whittaker, Dewey (AZ75)
Mon, 31 Oct 2005 08:20:36 -0700
Re: [NTC] Friday in paradise
Whittaker, Dewey (AZ75)
Mon, 17 Oct 2005 07:09:14 -0700
Re: [NTC] Friday in paradise
Whittaker, Dewey (AZ75)
Mon, 17 Oct 2005 08:49:51 -0700
New Sender Zilber Gil
Selective conformal coating machine
Zilber Gil
Thu, 27 Oct 2005 18:37:40 +0200
New Sender Zweigart, Siegmund
Help needed / searching for JEDEC standard
Zweigart, Siegmund
Thu, 20 Oct 2005 16:02:14 +0200
PCB specification / Automotive / incoming inspection
Zweigart, Siegmund
Mon, 17 Oct 2005 14:57:10 +0200

ATOM RSS1 RSS2