ª½¾P·s§Q¾¹, (2 Messages)
(Fwd) BGA (1 Message)
(no subject) (1 Message)
0603 Surface Mount (1 Message)
0603 Surface Mount Chip Inductor Land Dimensions (2 Messages)
0603 Surface Mount Chip Inductor Land Dimensions ? (3 Messages)
1206 jumper (6 Messages)
25mil SMT connectors, 16mil TQFPs (14mm package), 0402 chips (1 Message)
300um capillary film for stencil making (1 Message)
: Anybody using water soluble ? (2 Messages)
: CEM-1 & Nylon 6/6 (1 Message)
: Flux qualification on J-Std-001B (1 Message)
: Paste flux Splattering Test (1 Message)
: Solder on GoldFinger (2 Messages)
: Stop Technet (1 Message)
<No subject> (8 Messages)
? for Visula CAD users (1 Message)
Accuscore - Score depth measurement gauge (1 Message)
admin note: Job Postings (1 Message)
Admin Note: STOP TECHNET and other forum information (1 Message)
Admin Note: STOP TECHNET and other forum information -Reply (1 Message)
Admin Reply: Number changes to IPC Documents (1 Message)
ADMIN: "SENDERS" (4 Messages)
ADMIN: New Administrator. (9 Messages)
ADMIN: Re: [TN] Sign Off (1 Message)
ADMIN: Re: [TN] Sign Off or Digest? (1 Message)
ADVICE ON GOLD/JOINT EMBRITTLEMENT (2 Messages)
advice/recommendations FOR TRAINING PCB TECHNICIAN (1 Message)
AESF Papers (1 Message)
Alternative surface finishes (5 Messages)
Alternative Surface Finishes -Reply (2 Messages)
Aperture Wheel ? P/N ? (4 Messages)
APQP & FMEA (4 Messages)
Assembly (9 Messages)
Assembly -Reply (1 Message)
ASSEMBLY: Nitrogen Reflow -Reply (2 Messages)
assist with removal of [log in to unmask] from forum lists (1 Message)
ASSY: conformal coating service (2 Messages)
ASSY: Exhaust Fans, Ducting, and suck power... (5 Messages)
ASSY: Reflow, Wave, and Cleaner Exhaust Issues...(again!) (6 Messages)
Assy: Reliability, exposed copper, and moisture (1 Message)
ASSY: Storage of PCBA's (2 Messages)
Assy: Vents, blowers & sucking in general (3 Messages)
ASSY:profile max temps? (4 Messages)
Automatic stencil cleaner. (2 Messages)
AUTOROUTERS (1 Message)
BGA (3 Messages)
BGA "Board" (1 Message)
BGA assembly process (2 Messages)
BGA Electrical Performance (1 Message)
BGA Footprint (4 Messages)
bga standards (2 Messages)
BGA Test Fisture Formula's (2 Messages)
BGA Type Solder Sphere Deoxidation (2 Messages)
Block Changes/Single Process Initiatives (1 Message)
broken trace repair on VCR ciruit board (9 Messages)
Broken Traces (1 Message)
CAD Questions: Basic (1 Message)
CAF Test (4 Messages)
Call for Supplier Participation in Manual Soldering Iron Round Robin Testing (1 Message)
Capacitor Damage At Wave Solder (3 Messages)
Capacitor Damage At Wave Solder -Reply (2 Messages)
Cheaper buried resistors (1 Message)
Colight (3 Messages)
Common layer count for 1.6 +/- 0.2 mm thick board (2 Messages)
Component - PCB-Mounted RJ11 Plug Source (1 Message)
Concerning SMT board manufacturing (1 Message)
Conformal Coating Under Extractors (1 Message)
Connecting NC machines to network (2 Messages)
Conveyorised Plasma (1 Message)
Coplanarity for chip assembly (3 Messages)
copper out (1 Message)
Copper Plugging Vias (2 Messages)
Copper-Invar-Copper (1 Message)
Coupon Req'mts. (1 Message)
Crashing copper (4 Messages)
Crashing Iron and Lead (1 Message)
Crashing iron from solution (2 Messages)
Crashing lead from solution (1 Message)
Crystals/Oscillators failure (4 Messages)
CTE Conversion (2 Messages)
current carrying capacity of vias (3 Messages)
Defect Calculations (1 Message)
DES/FAB: New machine?? (2 Messages)
Diameter of Holes in Reinforcement (1 Message)
Diode Cracking (5 Messages)
DISCOLORATION (4 Messages)
Drill Room Vibration (1 Message)
Drum disposal (4 Messages)
DST Foil (5 Messages)
dual stropline (4 Messages)
Duroid pricing (1 Message)
Elcetrical Testing (4 Messages)
Electroless Solder Plating Solution (2 Messages)
Electroless Solder Plating Solution -Reply (2 Messages)
energy per sq mt production of pcb (1 Message)
ENIG/Heat sink (2 Messages)
epc show (1 Message)
EPCmail (1 Message)
ESD buildup on SMT reels (7 Messages)
ESD info (2 Messages)
Esd Standard (6 Messages)
Esher Grad (1 Message)
Excellon Drill format question (3 Messages)
FAB Land around via holes (4 Messages)
FAB,micro-via plating (1 Message)
Fab/Assy:Process (Philosophy Question) (4 Messages)
FAB: CMI hand held copper thickness checker (8 Messages)
FAB: FR1 laminate (3 Messages)
fluoride burns (8 Messages)
flux and stranded wires (3 Messages)
Fr4 material (2 Messages)
FR4 material/Rogers material compatibility? (7 Messages)
FR4 Tetra (1 Message)
Frequency Performance of FR-4 (7 Messages)
Frequency problems with FR-4 (12 Messages)
Frequency problems with FR4 (but ref:GETEK) (1 Message)
Frequency Response of PCB materials (2 Messages)
Fuji CP3 for 1005 chip pkg (4 Messages)
GEN: attachment files on TechNet postings (7 Messages)
Gen: NE Ohio Designers Council Email (1 Message)
GEN:Conductive Floor Tile Care (1 Message)
Gerber format question (5 Messages)
Gerber Viewer (11 Messages)
GETEK (1 Message)
Getting rid of Air Bubbles in Solder Paste Syringes (2 Messages)
Gold Solder Pot (3 Messages)
Hakuto 1500C & 610i - Dry Film Cut Sheet Laminator (3 Messages)
Has the forum gone off-ilne ? (1 Message)
HASL Alternative to Exposed copper (2 Messages)
HASL alternative.Exposed copper (7 Messages)
HASL alternatives (12 Messages)
HASL process (2 Messages)
heat deflection temp of FR4 (1 Message)
Help (7 Messages)
HELPPPPPPPP (1 Message)
Hey TechNet...Are you out there? (1 Message)
High resistance internal shorts (2 Messages)
high temperature solders (1 Message)
Holis Wave Soldering Machine (4 Messages)
Imaging or writing (2 Messages)
IMAPS Rocky Mountain Chapter meeting (1 Message)
import graphic (1 Message)
info (1 Message)
Insufficient Solder (2 Messages)
Interconnect Stress Test (3 Messages)
interfacial separation (3 Messages)
interplane separation (1 Message)
Ionic Contamination (3 Messages)
IPC 2222 High CTI use FR-6 CRM-5 ? (3 Messages)
IPC Certification (1 Message)
IPC Fall Technical Committee Meetings and EXPO (1 Message)
IPC Forums were down, now back up (2 Messages)
IPC Specs (7 Messages)
IPC-1170 Supplier Survey Form (4 Messages)
IPC-1710 Supplier Survey Form (1 Message)
IPC-A-600 (3 Messages)
IPC-D-275 conductor width .100" (3 Messages)
IPC-D-275 VS. MIL STD-275 (1 Message)
IPC-RB-276 (2 Messages)
Is the server down? (1 Message)
JPCA (3 Messages)
Jumper Wires (3 Messages)
Laminates (5 Messages)
Leaded Vs SMD PWAs (2 Messages)
Leakage paths through soft solder joints (3 Messages)
Legend Location Tolerance (3 Messages)
Liquid Photo Image Soldermask (4 Messages)
Liquid Photoresist (3 Messages)
looking for cooperation (1 Message)
Manual Soldering Iron Round Robin Testing, Call for Participation (1 Message)
Manufacturer & exporter of PCB (6 Messages)
Manufacturer @ exporter... (1 Message)
Marsico fax about HF1189/stranded wire (1 Message)
MAXIMUM ALLOWABLE REPAIRS ON PCB (2 Messages)
Maximum FR4 operating temperature (5 Messages)
Maximum FR4 operating temperature-related question (1 Message)
Mentor Graphics Interconnectix Tool (2 Messages)
Metallized teflon film (2 Messages)
MFG. Galvanic reactions (3 Messages)
MICROSECTION MICROETCH (2 Messages)
mil specifications mil-g-45204c & mil-s-13949 (2 Messages)
Misterious silence (1 Message)
Multilayer Lamination Post-Bake (3 Messages)
Multilayer press - how thick unclad FR4 can be pressed? (1 Message)
Need advice/recommendations (6 Messages)
Need Dry Film Laminator (2 Messages)
need info: automated counting chip capacitors / res (1 Message)
need info: automated counting chip capacitors / resistor s (1 Message)
need info: automated counting chip capacitors / resistors (3 Messages)
Need Me ? (1 Message)
Need source (5 Messages)
Need Test Labo. Information (1 Message)
New alternative surface finishes (4 Messages)
Ni plating and Immersion Au (4 Messages)
Nickel foil (5 Messages)
Nickel foil -Reply (1 Message)
Nitrogen reflow soldering (2 Messages)
no messages - (2 Messages)
No Subject (1 Message)
No Technet Mails (1 Message)
No. of layers Vs Cost (5 Messages)
Non wetting surfaces (exposed Cu) (2 Messages)
Non-metal bearing waste streams (1 Message)
Nonfunctional Lands: Do they improve PTH reliability? (1 Message)
Nonfunctional Lands: Do they improve PTH reliability? -Reply (1 Message)
North Texas Chapter IPC Designers Council Meeting (1 Message)
Not read: [TN] need info: automated counting (1 Message)
OSP and EMI (3 Messages)
Oven Heat Loading Clarification (4 Messages)
Oven problems (1 Message)
Pads, Tango PCB design software (1 Message)
Panasonic printer (1 Message)
Panel thickness measurents (1 Message)
Particles in holes (7 Messages)
Passive Shear tests (2 Messages)
Paste Deposit Parameters (2 Messages)
PC Fab Question (2 Messages)
PCB Designer with Allegro wanted (1 Message)
PCB Fabrication Images (3 Messages)
pcb finishes (1 Message)
PCB Layout s/w Buyers Guide (1 Message)
PCB Solder Sample: Solderability Test (3 Messages)
Photo Imagable solder mask (1 Message)
Photo Imagable solder mask -Reply (1 Message)
Photo imageable solder mask (6 Messages)
Photo imageable solder mask -Reply (1 Message)
Photo tool stability (17 Messages)
Photo tool stability -Reply (1 Message)
Photo tools (3 Messages)
Photolithography process (2 Messages)
Plasma Info (1 Message)
Plating Supplier (1 Message)
PnP Tape Splicing. (1 Message)
Polyimid vs FR4 (1 Message)
polyimide (3 Messages)
polyimide -Reply (1 Message)
Post Baking of PCBs & PCBAs (1 Message)
Probimer 52-Thanks for your assistance (1 Message)
Problem (1 Message)
Properties of Probimer 52 Solde (2 Messages)
Properties of Probimer 52 Soldermask (1 Message)
PT44 Team (1 Message)
PWB Test Coupons (5 Messages)
pwb-cca : FW: [TN] IPC Specs (2 Messages)
QRe: [TN] BGA Test Fisture Formula's (1 Message)
Questions on micro-BGA and voids on BGA (1 Message)
Quick Check of TDR Impedance Accuracy (6 Messages)
RE : [TN] Taiwan SpanNet (1 Message)
re [TN] : CEM-1 & Nylon 6/6 (1 Message)
Re. Flux/Stranded Wire (1 Message)
Re.: Training (1 Message)
Read: need info: automated counting chip capacitors / re sistors (2 Messages)
Read: need info: automated counting chip capacitors / resistors (6 Messages)
Read: need info: BAD ATTACHMENT (1 Message)
Receipt of 4/30/98 3:00 PM message (1 Message)
Recommend Transparent Molding Compound source? (1 Message)
Reflow Atmosphere (4 Messages)
Reflow Oven Heat Loading (3 Messages)
Reflowable electrolytic capacitors (1 Message)
Reliability of Immersion Gold PCB (8 Messages)
Removing Air From Solder Paste (3 Messages)
resin (1 Message)
RLP532A (PQFP-132) Land Pattern (2 Messages)
Ruthenium Analysis Options (2 Messages)
San Diego Chapter, IPC Designer Council meeting (1 Message)
Searching_for_Antimony (1 Message)
selective soldering (4 Messages)
Sign Off -Reply (4 Messages)
Sign Off or Digest? (2 Messages)
signoff technet (1 Message)
silicon on silicon (4 Messages)
SMD OPTOCOUPLERS (1 Message)
SMT (incl. BGA) rework rig (1 Message)
SMT Connections (1 Message)
Solder Ball? (3 Messages)
solder balls (5 Messages)
solder cup termination's without weep holes. (1 Message)
Solder Fracture Problems (6 Messages)
Solder GOLD plated connector to PCB's (6 Messages)
Solder Joints Emiting Noise? (1 Message)
Solder Paste Stencils (4 Messages)
Solder Sample: Why, what to do, any IPC guide line? (2 Messages)
solder spikes (1 Message)
solder spikes -Reply (1 Message)
solder training (4 Messages)
Solder void acceptability (1 Message)
Solderability Test for BGA (3 Messages)
some problems (1 Message)
source of adhesive coper foil (2 Messages)
Sparger residue (3 Messages)
Spec'ing Resisitivity on Plating Material (2 Messages)
spill-proof flux bottles (3 Messages)
Stencil Blades and Solder Balls (2 Messages)
Stencil Procedural Design (1 Message)
Stepanfoam A-206 (3 Messages)
stop TECHNET (9 Messages)
STOP TECHNET (KEEP IT!) (1 Message)
STOP TECHNET (NO vote) (2 Messages)
STOP TECHNET 2 - advice (1 Message)
STOP TECHNET 2 - another point of view (1 Message)
STOP TECHNET! (13 Messages)
Storing PCB's (7 Messages)
Subj: Corpane Semi-Aqueous Inline Cleaner (1 Message)
subscribe (4 Messages)
Subscribe ?? (1 Message)
subscribe TECHNET (1 Message)
SUPPLIER FOR SCREEN COATING CHEMICALS (2 Messages)
SUPPLIER INFORMATION. (2 Messages)
surface mount solder joints (3 Messages)
SV: [TN] High resistance internal shorts (1 Message)
swaged terminals (1 Message)
TAB test methods (2 Messages)
Taconic Fab Suppliers (3 Messages)
Taconic TLC30 material (1 Message)
Taiwan SpanNet (1 Message)
Tantal Caps crack during US cleaning (1 Message)
Technet (3 Messages)
Technet messages (1 Message)
Teclam (1 Message)
Telephony PWB layout rules (1 Message)
tents (6 Messages)
tents -Reply (1 Message)
Test (1 Message)
test - please ignore (1 Message)
Test message - Please ignore (1 Message)
Test Nets (1 Message)
Test pattern (2 Messages)
Thanks! (1 Message)
The US Environmental Protection Agency (EPA) Common Sense Initiative (CSI) Electronics Subcommittee, (3 Messages)
Thermal relief (5 Messages)
TN Electrical Conductive expoxy use of (3 Messages)
TN Photoresist stripping costs (8 Messages)
TN] Interconnect Stress Test (1 Message)
TN] Interconnect Stress Test -Reply (1 Message)
tombstoning & unsoldered connections (3 Messages)
Trace Widths for PCB's (4 Messages)
Unicam Training (1 Message)
unsubscribe (3 Messages)
Uresolve Plus (8 Messages)
Vacuum Degassing Solder Paste (1 Message)
Via Corrosion (2 Messages)
Via Reliability (3 Messages)
Vibration at Drill Room (1 Message)
Voids in solder joints (1 Message)
Voltage spacing on finished boards (1 Message)
wanted: volunteer PCB designer (1 Message)
Water soluble flux / stranded wire (1 Message)
wave solder operator (1 Message)
wave soldering expertise (1 Message)
Wave Soldering with Sn10 (2 Messages)
What are CKW formatted files? (2 Messages)
What is acceptable ESD voltage on Tape and Reel? (2 Messages)
What wood would a woodpeck peck? (2 Messages)
Where's Technet? (1 Message)
where's the mail? (1 Message)
Why are we complaining? (2 Messages)
wire terminations (2 Messages)
Writing procedures (6 Messages)
[CAD]PCB/SCH package under $10K (3 Messages)
[DC] IPC DC, San Diego, LOCATION CHANGE (1 Message)
[DES] Quick reminder, IPC meeting, San Diego (1 Message)
[FAB] Gold density A REPLY (2 Messages)
[FAB] High resistance internal shorts (3 Messages)
[FAB] Need Gold density (4 Messages)
[Fwd: Output of your job "rdwt90"] (1 Message)
[TN] broken trace repair on VCR ciruit board (1 Message)
[TN] Concerning SMT board manufacturing (1 Message)
[TN] Copper-Invar-Copper (1 Message)
[TN] Crystals/Oscillators failure (2 Messages)
[TN] Elcetrical Testing (1 Message)
[TN] Getting rid of Air Bubbles in Solder Paste Syrin (1 Message)
[TN] HASL alternative.Exposed copper (2 Messages)
[TN] Help (2 Messages)
[TN] Holis Wave Soldering Machine (1 Message)
[TN] IPC-1170 Supplier Survey Form (1 Message)
[TN] Need advice/recommendations (1 Message)
[Tn] Oscillator failures (1 Message)
[TN] STOP TECHNET! (2 Messages)
[TN} Hybrid Circuit Pins (4 Messages)
[TN} Hybrid Circuit Pins - Thanks (1 Message)