Hi Jeff

OK. I'll bite. Who makes such circuits? Are they UL approved?

Thanks for anything provided.

Gerry

-----Original Message-----
From:   McGlaughlin, Jeffrey A [SMTP:[log in to unmask]]
Sent:   Friday, May 01, 1998 7:26 AM
To:     [log in to unmask]
Subject:        Re: [TN] FR4 material/Rogers material compatibility?

Mitch -

I personally worked on one 4 layer design for an RF Transmitter that
used a
sandwich of 2 RO4003 cores an a center layer of FR-4 prepreg. This
design
preformed extremely well and was simple to tune.  I have also bonded
RO4350
with G-tek prepreg  which formed a very rigid  and thermal stable PWB.
Contact me off-line and I can recommend a fabricator for these types of
PWB's.

Jeffrey A. McGlaughlin
[log in to unmask]
Printed Circuit Board Designer
Battelle Memorial Institute
Columbus Ohio


        -----Original Message-----
        From:   Mitch Morey [SMTP:[log in to unmask]]

        I have a "similar" question which hopefully someone can answer.
I've
        been asked by our engineering group if FR4 material, is
compatible
with
        the Rogers 3000 and 4000 materials? We'd like to make a board
using
the
        Rogers material for some circuitry and FR4 material with the
other
        circuitry.

        Any luck?

        Mitch Morey
        Sr PCB Designer
        NSI Communications (was ComStream Corp)
        San Diego CA



################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################