LISTSERV - DESIGNERCOUNCIL Archives

DESIGNERCOUNCIL Archives

October 2000

DesignerCouncil@IPC.ORG

	LISTSERV Archives
	DESIGNERCOUNCIL Home

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:

Show Table of Contents

Subject	From	Date
October Meeting (10/17/00)	<>	Wed, 11 Oct 2000 08:56:15 -0600
Re: True conversion	Abd ul-Rahman Lomax	Mon, 23 Oct 2000 10:25:04 -0700
Alex Forbes/ENGINEERING/SYD/JTEC is out of the office.	Alex Forbes	Wed, 25 Oct 2000 15:18:22 +1000
Alex Forbes/ENGINEERING/SYD/JTEC is out of the office.	Alex Forbes	Thu, 26 Oct 2000 01:00:31 +1000
Minimum Clearance	Alexis Meehan <[log in to unmask]>	Mon, 2 Oct 2000 15:22:55 -0700
Allegro Designers wanted	Alyson	Fri, 6 Oct 2000 14:19:59 -0400
Ic Layout and Asic	Alyson	Mon, 23 Oct 2000 10:27:58 -0400
Pads Designers needed!	Alyson	Tue, 24 Oct 2000 10:27:47 -0400
Sr Allegro Designers	Alyson	Tue, 24 Oct 2000 10:31:05 -0400
Re: True conversion	Beckman, Roy	Mon, 23 Oct 2000 11:16:23 -0600
Allegro in the UK	Bright Meaning	Thu, 5 Oct 2000 04:45:37 -0700
AMP HS3 connectors	Cannone Giuseppe	Thu, 5 Oct 2000 18:12:21 +0200
Re: True conversion	Chris Ball	Mon, 23 Oct 2000 13:41:47 -0400
Benflex and assembly	Chris Robertson	Thu, 26 Oct 2000 13:58:39 -0500
Re: Blind vias VS Current AT High Temperatures	Chris Robertson	Wed, 4 Oct 2000 12:53:40 -0500
Re: Density of GI Laminate	Chris Robertson	Tue, 24 Oct 2000 15:25:58 -0500
unsubscribe	Clifton Rose	Mon, 16 Oct 2000 12:44:21 -0500
Greater Phoenix Designers Council. - October Meeting notice	Cyrus Ringle	Wed, 4 Oct 2000 14:41:11 -0600
cap voltage rating	David Cary	Mon, 23 Oct 2000 19:47:52 -0500
Re: Minimum fastener Clearance	David Cary	Tue, 3 Oct 2000 09:55:04 -0500
Re: True conversion	David Cary	Mon, 23 Oct 2000 12:40:30 -0500
using PWB as heat sink	David Cary	Fri, 13 Oct 2000 10:57:54 -0500
Re: using PWB as heat sink	David Cary	Fri, 13 Oct 2000 19:05:17 -0500
Re: diff pair routing	David Ricketts	Tue, 31 Oct 2000 13:42:11 -0800
Re: using PWB as heat sink	David Ricketts	Sat, 14 Oct 2000 13:56:55 -0700
Mid to High Volume Multilayer Boards	David Wager	Fri, 27 Oct 2000 15:26:36 -0400
Re: Soldermask	Dee Stover	Mon, 30 Oct 2000 09:08:28 -0700
Re: True conversion	Dee Stover	Mon, 23 Oct 2000 11:22:05 -0700
Re: Blind/Buried Vias Board House	Donna Perry	Fri, 13 Oct 2000 12:47:58 -0700
Re: certification question	Doug	Tue, 3 Oct 2000 07:36:43 -0700
Re: Soldermask	Ed Valentine	Mon, 30 Oct 2000 14:11:10 -0500
Re: Blind/Buried Vias Board House	Galang, Jerry	Fri, 13 Oct 2000 13:23:43 -0700
SNEC Meeting	Gary Ferrari	Tue, 3 Oct 2000 00:34:19 EDT
Next meeting of NE Ohio DC	Gary Shoemaker	Sat, 7 Oct 2000 12:06:23 -0400
Re: Trace width on 0603's	George Patrick	Tue, 31 Oct 2000 07:50:32 -0800
Re: True conversion	George Patrick	Mon, 23 Oct 2000 10:27:13 -0700
Re: [[DC] SNEC Meeting]	GKasKey	Tue, 3 Oct 2000 22:21:11 EDT
Re: OT: Obsolete Parts Vendors	Golembiewski, Ray	Mon, 16 Oct 2000 13:06:49 -0400
positions available...	Heather	Mon, 2 Oct 2000 10:49:17 -0400
POSITIONS AVAILABLE...	Heather	Thu, 19 Oct 2000 13:40:53 -0400
Positions available...	Heather	Wed, 25 Oct 2000 09:16:04 -0400
Positions available...	Heather	Wed, 25 Oct 2000 09:18:16 -0400
Positions available...	Heather	Wed, 25 Oct 2000 14:38:52 -0400
POSITIONS AVAILABLE...	Heather	Fri, 27 Oct 2000 15:32:51 -0400
POSITIONS AVAILABLE...	Heather	Mon, 30 Oct 2000 16:03:22 -0500
POSITIONS AVAILABLE...	Heather	Mon, 30 Oct 2000 16:07:24 -0500
unsubscribe	Hoeg, Rick	Mon, 9 Oct 2000 09:41:25 -0700
True conversion	Huffman, Tony	Mon, 23 Oct 2000 12:09:26 -0500
Re: Minimum Clearance	Hurst, Joe	Tue, 3 Oct 2000 08:11:45 -0400
ORGANIC SOLDER PROTECTION	Jim McMurry	Tue, 31 Oct 2000 10:50:43 -0500
vias in SMT lands	Joel McGinn	Mon, 16 Oct 2000 09:24:16 -0500
IPC, Designer Council, Orange County, CA	Kevin L. Seaman	Wed, 18 Oct 2000 21:59:37 -0700
Regis Philbin - PCB Designer	Kevin L. Seaman	Mon, 30 Oct 2000 22:16:45 -0800
diff pair routing	Konrad Iten	Tue, 31 Oct 2000 09:04:21 -0800
Job Posting: EDA tools/librarian Engineer.....	Leonard Toohey	Mon, 9 Oct 2000 15:19:27 -0500
Re: Blind/Buried Vias Board House	Linda Gallo	Fri, 13 Oct 2000 16:29:47 -0500
NIDC Meeting 10/18/00 @ Holiday Inn, Itasca IL	Linda Gallo	Mon, 9 Oct 2000 10:29:09 -0500
Northern IL DC Meeting reminder 10-18-00 Itasca, IL	Linda Gallo	Mon, 16 Oct 2000 11:06:43 -0500
Re: True conversion	Mark Gilbert	Mon, 23 Oct 2000 13:23:23 -0400
KwickFit panel software?	Mark Mainland	Thu, 26 Oct 2000 08:46:33 -0500
Trace width on 0603's	Mark Mainland	Tue, 31 Oct 2000 09:16:00 -0600
Component placement & orientation - during reflow ?	Matthew Lamkin	Wed, 11 Oct 2000 11:03:45 +0100
SMT Component storage recommendations?	Matthew Lamkin	Tue, 31 Oct 2000 11:58:32 -0000
Blind vias VS Current AT High Temperatures	McGlaughlin, Jeffrey A	Wed, 4 Oct 2000 12:22:14 -0400
Job opp, San Diego, Cadence tools	Mitch Morey	Fri, 6 Oct 2000 09:12:07 -0800
Re: Blind/Buried Vias Board House	Paul Olson	Fri, 13 Oct 2000 15:26:19 -0500
Automated Test Point Tools	Phil Dutton	Wed, 18 Oct 2000 09:56:53 +0930
Re: Minimum Clearance	Phil Dutton	Tue, 3 Oct 2000 09:11:40 +0930
Density of GI Laminate	Pucket, Larry Lee	Tue, 24 Oct 2000 13:51:51 -0600
Re: Automated Test Point Tools	Ray Humphrey	Wed, 18 Oct 2000 02:51:43 -0700
PCB Designer Job Opportunity	Ray Smith	Wed, 25 Oct 2000 09:51:35 -0400
Blind/Buried Vias Board House	RD Munger	Fri, 13 Oct 2000 14:27:16 -0500
Soldermask	Rod Simon	Mon, 30 Oct 2000 09:38:23 -0600
Re: cap voltage rating	Roger M. Stoops	Thu, 26 Oct 2000 08:19:08 -0400
Re: cap voltage rating	Russ Steiner	Tue, 24 Oct 2000 09:42:41 EDT
unsubscribe	Russel Pringle	Mon, 16 Oct 2000 16:47:01 +0100
certification question	Schwartz, Jerome	Mon, 2 Oct 2000 11:56:36 -0400
Resistance of solder joint.	Shu Zu Dai	Fri, 13 Oct 2000 16:09:47 -0400
Re: True conversion	Thomas, Stephen	Mon, 23 Oct 2000 18:15:37 +0100
Re: KwickFit panel software?	Tom Monico	Thu, 26 Oct 2000 23:16:59 -0400
Re: True conversion	Tom Parkinson - Quality System Manager	Mon, 23 Oct 2000 13:23:12 -0400
unsubscribe	Werner, Robert G.	Tue, 17 Oct 2000 22:16:49 -0400
Re: certification question	Wynne, Derek	Tue, 3 Oct 2000 02:39:15 -0500
OT: Obsolete Parts Vendors	Wynne, Derek	Mon, 16 Oct 2000 11:00:40 -0500

ATOM RSS1 RSS2

LISTSERV.IPC.ORG

DESIGNERCOUNCIL Archives

October 2000

DesignerCouncil@IPC.ORG

Subject

From

Date