LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


September 2002


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

1mm bga voiding (14 messages)
2 track weld per 300 sq.mm (1 message)
2% Silver solder and tombstoning... (9 messages)
2002 Designers Learning Symposium, Toronto Sept 30-Oct 5 (1 message)
<No subject> (2 messages)
Age and Other Resistor Network foot-print issues (1 message)
Amperage vs Wire Size (4 messages)
Articles (1 message)
Bare Board serialization (10 messages)
BGA failure and Rework (17 messages)
BGA rework - excessive collapsing (17 messages)
BGA Under fill (5 messages)
BGA Underfill (3 messages)
BGA underfill process (1 message)
Bimetallic Corrosion (1 message)
Black Tar in Wavesolder (4 messages)
board contaminated with glycol (6 messages)
Board edge tolerances (5 messages)
Board shop capability doc (3 messages)
BOOK ERROR NOTICE (1 message)
CGAs (6 messages)
Check out IPC specifications (4 messages)
CLEANED UP MY ACT BUT FOR IPC (10 messages)
Cleaning Aluminum (7 messages)
Cleanliness of no-clean before conformal coating (8 messages)
Close pitch PCB failure (6 messages)
Component Guide/charts (7 messages)
Conformask 2523 (3 messages)
Contact Plated Finish (7 messages)
controlled impedance calculations.. (2 messages)
Copper Tin Intermetallic Growth Rate (13 messages)
Corrosive Test Methods (1 message)
Difference in TERMINOLOGY (7 messages)
dk for flex (1 message)
Double coated copper (4 messages)
Dull Joint on the Gold plated PCB. (4 messages)
DuPont (or alternative) conductive via fill (1 message)
DuPont Pyralux Materials (2 messages)
ECWC9-ECP2002 Newsflash Issue #2, September, 2002 (1 message)
ECWC9_ECP Newsletter #3 (1 message)
Eddy Current Soldering (2 messages)
edge clip for hybrid (3 messages)
Electra users, willing to share? (2 messages)
electroless gold service (1 message)
Emptying wave solder pot (1 message)
Emptying Wave Solder Pot...An Epilog (7 messages)
ESD ADV 20.20 (8 messages)
FACILITY TOURS, NEW ADDITIONS, EDUCATION...still time to register for the Designers Learning Symposium in Toronto (1 message)
FW: Polyimide cure (1 message)
GALVANIC Metal Chart (7 messages)
Galvanic Scale - the links (1 message)
gold wire bonding (9 messages)
HASL (7 messages)
HASL/Gold Finish (2 messages)
Heel strap conductivity (4 messages)
Help on obsolete assemblies (2 messages)
High Mix? Turnover? Quality? (2 messages)
High temp pastes for wave soldering... (2 messages)
High temp. solder on bottom side SMT (1 message)
HMP Solder Paste (4 messages)
Hole size specification (2 messages)
How to clean gold flash over nickle prior to assembly (2 messages)
How to use gold finished boards that have been handled? (8 messages)
Humiseal 1B31 LOC Compatible with No-Clean? (4 messages)
I'm gone again (28 messages)
I'm gone again - Earl Moon (2 messages)
Impact of Board Warpage on BGAs assembly (3 messages)
Information about Benchmark in Obsolete Material (1 message)
Inspection Checklist (2 messages)
INTEL P4 AND THE HEAT SINK THERMAL TAPE (15 messages)
Ionograph measurements (13 messages)
IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes (21 messages)
Is "Gerber Data" proper noun or noun? (1 message)
It ain't over til it's over so now it's over (3 messages)
Jim Herard/Endicott/IBM is out of the office. (1 message)
Laminate material for high-layer count PCB's (1 message)
Looking for someone (2 messages)
Looking for very thin, Low Dk and Low loss material (5 messages)
Manual Press for press fit connector (3 messages)
Milkiness in cleaning solution (6 messages)
Moisture sensitive parts (7 messages)
MoonMan and some interesting conference calls (2 messages)
MOONMAN'S BOOK ADDRESS (4 messages)
MoonMan's book as reference material whether for sale or free (1 message)
MUX Failures...an update. (1 message)
Need help relaying a message (3 messages)
Noclean Wave soldering (5 messages)
NTC Re: [TN] Emptying Wave Solder Pot...An Epilog (1 message)
NTC-Friday Treat...delete if you're not interested (2 messages)
Off Topic - - - TONS of emails with attachments... (1 message)
Opto land pattern (4 messages)
P4 SUCCESS AT LAST (3 messages)
Paint stripper (1 message)
PAINT STRIPPERS (8 messages)
Panelisation Software (9 messages)
Part Consolidation (1 message)
Parylene coating military electronics (6 messages)
PCB design with mask over vias. (5 messages)
PCB's and a trip to the bank (9 messages)
phenolic boards (2 messages)
plating question (1 message)
POLAR INSTRUMENTS (8 messages)
poor wetting- pcb or assy problem? (2 messages)
Post HASL cleaning solution (5 messages)
Poyimide cure (6 messages)
pre-condition (1 message)
Pros and Cons of BGAs v.s. CGAs (2 messages)
Qualification of In-line clearner (4 messages)
quality - 5 um base copper foil (2 messages)
Quality Metrics (3 messages)
radial lead spec. question (1 message)
Rejected posting to [log in to unmask] (1 message)
Reliability Testing 85/85 (7 messages)
reliability testing with daisy chain parts (2 messages)
ReParylene (1 message)
request of formula of calculation of impedance after the rmal shock (1 message)
request of formula of calculation of impedance after thermal shock (4 messages)
Reverse Engineering (5 messages)
RF cables (3 messages)
RF35P desmear with permanganate (1 message)
rigid flex (4 messages)
Rigid Flex Supplier (2 messages)
Rod Smith/Endicott/IBM is out of the office. (1 message)
Silver Through hole PCBs (1 message)
SIR Testing issue (6 messages)
SMD packages (4 messages)
SMT Magazine (1 message)
solder beads (2 messages)
Solder mask vacuum laminators (2 messages)
solder paste below Type 5 (2 messages)
Solder paste ProFlow issue (3 messages)
Solder paste viscosity testing (1 message)
Solderability Testing (1 message)
source for board racks (2 messages)
Specs (2 messages)
Spring clamp (5 messages)
Strip-able conformal coating experiences (9 messages)
stripping brass (10 messages)
Taped SMD Parts Counters (2 messages)
TechNet Listserver... (1 message)
Temp and RH Data Loggers (1 message)
Test Boards (3 messages)
THE BOOK YOU ALL ORDERED, OR NOT (1 message)
Theramal Fatigue Resistant Solder (4 messages)
Thermal stress question - vias (1 message)
TONS of emails with attachments... (5 messages)
Torque Inspections (10 messages)
Trying to contact, NTC (1 message)
TSSOP to SOIC Adapter for 8-pin devices (4 messages)
unplated copper nickel alloy (6 messages)
Varnished leads. (3 messages)
Via Reliability Study (3 messages)
Viscosity vs Temperature. (9 messages)
Wave Optimizer (3 messages)
Wave solder bath analysis (5 messages)
Wave soldering pallet thickness (3 messages)
White Wire Reliability (1 message)
Why I had to empty my solder pot... (2 messages)
XY data (20 messages)
Zinc casting and solderability (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

Kathy Kuhlow <[log in to unmask]>

Fri, 6 Sep 2002 15:47:15 -0500

90 lines

Re:

Graham Collins <[log in to unmask]>

Mon, 9 Sep 2002 06:53:17 -0400

88 lines

New Thread

1mm bga voiding

1mm bga voiding

[log in to unmask]

Mon, 9 Sep 2002 10:13:00 -0400

39 lines

Re: 1mm bga voiding

Victor Hernandez <[log in to unmask]>

Mon, 9 Sep 2002 11:23:59 -0500

78 lines

Re: 1mm bga voiding

[log in to unmask]

Mon, 9 Sep 2002 13:27:08 -0400

123 lines

Re: 1mm bga voiding

Wenger, George M. <[log in to unmask]>

Mon, 9 Sep 2002 13:27:42 -0500

186 lines

Re: 1mm bga voiding

Dave Chapman <[log in to unmask]>

Mon, 9 Sep 2002 14:02:55 -0500

159 lines

Re: 1mm bga voiding

Ed Shea <[log in to unmask]>

Mon, 9 Sep 2002 12:22:38 -0700

155 lines

Re: 1mm bga voiding

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 15:04:20 -0500

27 lines

Re: 1mm bga voiding

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 17:13:07 -0500

24 lines

Re: 1mm bga voiding

[log in to unmask]

Tue, 10 Sep 2002 09:53:03 +0800

185 lines

Re: 1mm bga voiding

[log in to unmask]

Tue, 10 Sep 2002 08:46:21 -0400

226 lines

Re: 1mm bga voiding

Earl Moon <[log in to unmask]>

Tue, 10 Sep 2002 07:36:53 -0600

273 lines

Re: 1mm bga voiding

Victor Hernandez <[log in to unmask]>

Tue, 10 Sep 2002 09:26:12 -0500

263 lines

Re: 1mm bga voiding

Wenger, George M. <[log in to unmask]>

Tue, 10 Sep 2002 13:13:25 -0500

303 lines

Re: 1mm bga voiding

[log in to unmask]

Thu, 12 Sep 2002 08:22:51 +0800

280 lines

New Thread

2 track weld per 300 sq.mm

2 track weld per 300 sq.mm

Oliver Yeo <[log in to unmask]>

Tue, 3 Sep 2002 15:19:53 +0930

29 lines

New Thread

2% Silver solder and tombstoning...

2% Silver solder and tombstoning...

Steve Gregory <[log in to unmask]>

Tue, 10 Sep 2002 15:16:08 EDT

110 lines

Re: 2% Silver solder and tombstoning...

Guy Ramsey <[log in to unmask]>

Tue, 10 Sep 2002 17:42:58 -0400

227 lines

Re: 2% Silver solder and tombstoning...

Earl Moon <[log in to unmask]>

Tue, 10 Sep 2002 16:24:45 -0600

304 lines

Re: 2% Silver solder and tombstoning...

rgrant <[log in to unmask]>

Tue, 10 Sep 2002 16:24:41 -0600

210 lines

Re: 2% Silver solder and tombstoning...

Dave Hillman <[log in to unmask]>

Tue, 10 Sep 2002 20:05:42 -0500

123 lines

Re: 2% Silver solder and tombstoning...

Steve Gregory <[log in to unmask]>

Tue, 10 Sep 2002 23:21:06 EDT

248 lines

Re: 2% Silver solder and tombstoning...

rgrant <[log in to unmask]>

Wed, 11 Sep 2002 08:34:31 -0600

305 lines

Re: 2% Silver solder and tombstoning...

[log in to unmask]

Wed, 11 Sep 2002 12:08:04 EDT

22 lines

Re: 2% Silver solder and tombstoning...

Mike Fenner <[log in to unmask]>

Thu, 12 Sep 2002 17:29:57 +0100

173 lines

New Thread

2002 Designers Learning Symposium, Toronto Sept 30-Oct 5

2002 Designers Learning Symposium, Toronto Sept 30-Oct 5

Keach Sasamori <[log in to unmask]>

Mon, 9 Sep 2002 16:26:10 -0500

205 lines

New Thread

<No subject>

<No subject>

Steve Thomas <[log in to unmask]>

Fri, 6 Sep 2002 11:44:29 -0700

35 lines

<No subject>

Chia Hoo Lee <[log in to unmask]>

Wed, 18 Sep 2002 11:41:22 +0800

29 lines

New Thread

Age and Other Resistor Network foot-print issues

Age and Other Resistor Network foot-print issues

Avigdor Jakubinsky <[log in to unmask]>

Tue, 3 Sep 2002 01:59:09 +0300

225 lines

New Thread

Amperage vs Wire Size

Amperage vs Wire Size

Dave Hornback <[log in to unmask]>

Mon, 16 Sep 2002 08:24:55 -0700

24 lines

Re: Amperage vs Wire Size

Roger Stoops <[log in to unmask]>

Mon, 16 Sep 2002 12:01:18 -0400

64 lines

Re: Amperage vs Wire Size

Guy Ramsey <[log in to unmask]>

Mon, 16 Sep 2002 12:11:50 -0400

56 lines

Re: Amperage vs Wire Size

Ray Klein <[log in to unmask]>

Mon, 16 Sep 2002 12:18:24 -0700

53 lines

New Thread

Articles

Articles

Randy Bock Sr. <[log in to unmask]>

Mon, 16 Sep 2002 12:24:00 -0400

76 lines

New Thread

Bare Board serialization

Bare Board serialization

Mark Hargreaves <[log in to unmask]>

Wed, 4 Sep 2002 12:27:15 -0400

31 lines

Re: Bare Board serialization

Randy Bock Sr. <[log in to unmask]>

Wed, 4 Sep 2002 14:27:27 -0400

65 lines

Re: Bare Board serialization

McCabe, Chris <[log in to unmask]>

Wed, 4 Sep 2002 15:17:04 -0400

64 lines

Re: Bare Board serialization

[log in to unmask]

Wed, 4 Sep 2002 15:47:00 EDT

24 lines

Re: Bare Board serialization

Morse, Carrie <[log in to unmask]>

Wed, 4 Sep 2002 16:16:43 -0400

66 lines

Re: Bare Board serialization

Leland Woodall <[log in to unmask]>

Thu, 5 Sep 2002 01:24:24 -0400

80 lines

Re: Bare Board serialization

Atkinson, Neil <[log in to unmask]>

Thu, 5 Sep 2002 07:35:59 +0100

100 lines

Re: Bare Board serialization

Rama Vemulapalli <[log in to unmask]>

Thu, 5 Sep 2002 02:58:52 -0400

39 lines

Re: Bare Board serialization

Dougal Stewart <[log in to unmask]>

Thu, 5 Sep 2002 10:11:27 +0100

68 lines

Re: Bare Board serialization

Randy Bock Sr. <[log in to unmask]>

Thu, 5 Sep 2002 08:46:02 -0400

136 lines

New Thread

BGA failure and Rework

BGA failure and Rework

Peter Lee <[log in to unmask]>

Tue, 17 Sep 2002 17:23:00 -0700

41 lines

Re: BGA failure and Rework

Steve Gregory <[log in to unmask]>

Tue, 17 Sep 2002 21:01:03 EDT

99 lines

Re: BGA failure and Rework

Gaby Bogdan <[log in to unmask]>

Wed, 18 Sep 2002 09:47:31 +0200

69 lines

Re: BGA failure and Rework

Steve Owen <[log in to unmask]>

Wed, 18 Sep 2002 09:56:24 +0100

197 lines

Re: BGA failure and Rework

[log in to unmask]

Wed, 18 Sep 2002 18:40:42 +0800

107 lines

Re: BGA failure and Rework

Rick Thompson <[log in to unmask]>

Wed, 18 Sep 2002 07:23:00 -0700

72 lines

Re: BGA failure and Rework

Victor Hernandez <[log in to unmask]>

Wed, 18 Sep 2002 12:12:32 -0500

109 lines

Re: BGA failure and Rework

Tore Jakobsen <[log in to unmask]>

Fri, 20 Sep 2002 05:40:14 -0500

63 lines

Re: BGA failure and Rework

Victor Hernandez <[log in to unmask]>

Fri, 20 Sep 2002 08:52:18 -0500

103 lines

Re: BGA failure and Rework

Tore Jakobsen <[log in to unmask]>

Mon, 23 Sep 2002 01:53:04 -0500

38 lines

Re: BGA failure and Rework

Victor Hernandez <[log in to unmask]>

Mon, 23 Sep 2002 06:49:38 -0500

90 lines

Re: BGA failure and Rework

Werner Engelmaier <[log in to unmask]>

Mon, 23 Sep 2002 21:55:32 EDT

37 lines

Re: BGA failure and Rework

Higgins Leo <[log in to unmask]>

Wed, 25 Sep 2002 03:50:38 -0400

248 lines

Re: BGA failure and Rework

Peter Lee <[log in to unmask]>

Wed, 25 Sep 2002 23:37:00 -0700

152 lines

Re: BGA failure and Rework

WEEKES, MICHAEL HS-SNS <[log in to unmask]>

Thu, 26 Sep 2002 09:12:08 -0400

148 lines

Re: BGA failure and Rework

Wenger, George M. <[log in to unmask]>

Thu, 26 Sep 2002 09:21:18 -0500

296 lines

Re: BGA failure and Rework

Randy Bock Sr. <[log in to unmask]>

Thu, 26 Sep 2002 11:32:57 -0400

265 lines

New Thread

BGA rework - excessive collapsing

BGA rework - excessive collapsing

Peter Lee <[log in to unmask]>

Mon, 9 Sep 2002 13:16:12 -0700

39 lines

Re: BGA rework - excessive collapsing

Guy Ramsey <[log in to unmask]>

Mon, 9 Sep 2002 17:04:56 -0400

77 lines

Re: BGA rework - excessive collapsing

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 15:48:24 -0500

102 lines

Re: BGA rework - excessive collapsing

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 15:51:02 -0500

102 lines

Re: BGA rework - excessive collapsing

Morse, Carrie <[log in to unmask]>

Mon, 9 Sep 2002 17:56:37 -0400

77 lines

Re: BGA rework - excessive collapsing

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 17:04:22 -0500

25 lines

Re: BGA rework - excessive collapsing

rgrant <[log in to unmask]>

Mon, 9 Sep 2002 16:39:30 -0600

90 lines

Re: BGA rework - excessive collapsing

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 18:53:29 -0500

24 lines

Re: BGA rework - excessive collapsing

[log in to unmask]

Tue, 10 Sep 2002 10:00:38 +0800

91 lines

Re: BGA rework - excessive collapsing

Tom Buschor <[log in to unmask]>

Tue, 10 Sep 2002 07:56:00 -0500

39 lines

Re: BGA rework - excessive collapsing

Bill Wesmoreland <[log in to unmask]>

Tue, 10 Sep 2002 08:30:49 -0500

130 lines

Re: BGA rework - excessive collapsing

Peter Lee <[log in to unmask]>

Tue, 10 Sep 2002 07:34:45 -0700

63 lines

Re: BGA rework - excessive collapsing

Victor Hernandez <[log in to unmask]>

Tue, 10 Sep 2002 11:37:47 -0500

94 lines

Re: BGA rework - excessive collapsing

Guy Ramsey <[log in to unmask]>

Tue, 10 Sep 2002 12:39:53 -0400

65 lines

Re: BGA rework - excessive collapsing

Earl Moon <[log in to unmask]>

Tue, 10 Sep 2002 12:06:04 -0600

93 lines

Re: BGA rework - excessive collapsing

[log in to unmask]

Thu, 12 Sep 2002 08:34:30 +0800

109 lines

Re: BGA rework - excessive collapsing

McCall,Doug <[log in to unmask]>

Tue, 17 Sep 2002 14:46:31 +0100

112 lines

New Thread

BGA Under fill

Re: BGA Under fill

Victor Hernandez <[log in to unmask]>

Tue, 10 Sep 2002 08:17:34 -0500

80 lines

Re: BGA Under fill

Graham Collins <[log in to unmask]>

Tue, 10 Sep 2002 12:51:17 -0400

124 lines

Re: BGA Under fill

Victor Hernandez <[log in to unmask]>

Tue, 10 Sep 2002 13:51:17 -0500

152 lines

Re: BGA Under fill

Graham Collins <[log in to unmask]>

Wed, 11 Sep 2002 07:27:19 -0400

195 lines

Re: BGA Under fill

joyce <[log in to unmask]>

Wed, 11 Sep 2002 11:09:33 -0400

221 lines

New Thread

BGA Underfill

BGA Underfill

Graham Collins <[log in to unmask]>

Tue, 10 Sep 2002 07:09:23 -0400

44 lines

Re: BGA Underfill

Creswick, Steven <[log in to unmask]>

Wed, 11 Sep 2002 05:44:07 -0400

124 lines

Re: BGA Underfill

[log in to unmask]

Thu, 12 Sep 2002 08:13:38 +0800

161 lines

New Thread

BGA underfill process

Re: BGA underfill process

Werner Engelmaier <[log in to unmask]>

Wed, 11 Sep 2002 23:28:36 EDT

39 lines

New Thread

Bimetallic Corrosion

Bimetallic Corrosion

Eric Dawson <[log in to unmask]>

Fri, 20 Sep 2002 08:12:59 +0100

33 lines

New Thread

Black Tar in Wavesolder

Black Tar in Wavesolder

Dave Pahlas <[log in to unmask]>

Fri, 13 Sep 2002 10:02:47 -0400

44 lines

Re: Black Tar in Wavesolder

Dave Hillman <[log in to unmask]>

Fri, 13 Sep 2002 10:01:46 -0500

93 lines

Re: Black Tar in Wavesolder

Rudy Sedlak <[log in to unmask]>

Fri, 13 Sep 2002 11:01:59 EDT

53 lines

Re: Black Tar in Wavesolder

Guy Ramsey <[log in to unmask]>

Fri, 13 Sep 2002 11:42:05 -0400

82 lines

New Thread

board contaminated with glycol

board contaminated with glycol

Bev Christian <[log in to unmask]>

Wed, 4 Sep 2002 14:13:04 -0400

33 lines

Re: board contaminated with glycol

Munie, Gregory <[log in to unmask]>

Wed, 4 Sep 2002 14:25:03 -0500

66 lines

Re: board contaminated with glycol

Rudy Sedlak <[log in to unmask]>

Wed, 4 Sep 2002 17:04:56 EDT

28 lines

Re: board contaminated with glycol

Brian Ellis <[log in to unmask]>

Thu, 5 Sep 2002 09:39:21 +0300

76 lines

Re: board contaminated with glycol

Munie, Gregory <[log in to unmask]>

Thu, 5 Sep 2002 10:18:11 -0500

120 lines

Re: board contaminated with glycol

Leo Roos <[log in to unmask]>

Thu, 5 Sep 2002 08:36:00 -0700

67 lines

New Thread

Board edge tolerances

Board edge tolerances

Dave Chapman <[log in to unmask]>

Wed, 11 Sep 2002 08:11:28 -0500

23 lines

Re: Board edge tolerances

Randy Bock Sr. <[log in to unmask]>

Wed, 11 Sep 2002 17:35:42 -0400

55 lines

Re: Board edge tolerances

Croslin, Robert <[log in to unmask]>

Thu, 12 Sep 2002 08:03:30 -0400

56 lines

Re: Board edge tolerances

Roger Stoops <[log in to unmask]>

Thu, 12 Sep 2002 15:02:35 -0400

49 lines

Re: Board edge tolerances

[log in to unmask]

Wed, 18 Sep 2002 14:53:42 -0400

27 lines

New Thread

Board shop capability doc

Board shop capability doc

[log in to unmask]

Mon, 30 Sep 2002 16:27:36 EDT

26 lines

Re: Board shop capability doc

Charlie McMahon <[log in to unmask]>

Mon, 30 Sep 2002 17:34:19 -0400

49 lines

Re: Board shop capability doc

Steve Gregory <[log in to unmask]>

Mon, 30 Sep 2002 17:49:47 EDT

90 lines

New Thread

BOOK ERROR NOTICE

BOOK ERROR NOTICE

Earl Moon <[log in to unmask]>

Wed, 4 Sep 2002 11:06:05 -0500

44 lines

New Thread

CGAs

CGAs

Louis, Edwin @ CSE <[log in to unmask]>

Tue, 24 Sep 2002 09:38:40 -0400

24 lines

Re: CGAs

Werner Engelmaier <[log in to unmask]>

Tue, 24 Sep 2002 12:04:10 EDT

36 lines

Re: CGAs

Louis, Edwin @ CSE <[log in to unmask]>

Tue, 24 Sep 2002 14:51:41 -0400

62 lines

Re: CGAs

Tegehall Per-Erik <[log in to unmask]>

Wed, 25 Sep 2002 09:07:02 +0200

89 lines

Re: CGAs

Victor Hernandez <[log in to unmask]>

Wed, 25 Sep 2002 08:44:30 -0500

125 lines

Re: CGAs

Werner Engelmaier <[log in to unmask]>

Thu, 26 Sep 2002 13:25:38 EDT

53 lines

New Thread

Check out IPC specifications

Check out IPC specifications

Adair, Bret <[log in to unmask]>

Thu, 26 Sep 2002 15:02:33 -0700

86 lines

Re: Check out IPC specifications

Jack Crawford <[log in to unmask]>

Fri, 27 Sep 2002 09:45:31 -0500

205 lines

Check out IPC specifications

Jack C. Olson <[log in to unmask]>

Sat, 28 Sep 2002 09:37:28 -0500

66 lines

Re: Check out IPC specifications

Adair, Bret <[log in to unmask]>

Mon, 30 Sep 2002 08:50:23 -0700

234 lines

New Thread

CLEANED UP MY ACT BUT FOR IPC

CLEANED UP MY ACT BUT FOR IPC

Earl Moon <[log in to unmask]>

Wed, 11 Sep 2002 15:11:35 -0500

32 lines

Re: CLEANED UP MY ACT BUT FOR IPC

[log in to unmask]

Thu, 12 Sep 2002 12:47:20 +0800

106 lines

Re: CLEANED UP MY ACT BUT FOR IPC

Jim Kittel <[log in to unmask]>

Thu, 12 Sep 2002 06:17:31 -0600

62 lines

Re: CLEANED UP MY ACT BUT FOR IPC

Bill Wesmoreland <[log in to unmask]>

Thu, 12 Sep 2002 08:02:43 -0500

73 lines

Re: CLEANED UP MY ACT BUT FOR IPC

Alcorn, Brent <[log in to unmask]>

Thu, 12 Sep 2002 09:16:13 -0400

94 lines

Re: CLEANED UP MY ACT BUT FOR IPC

Mark Charlton <[log in to unmask]>

Thu, 12 Sep 2002 10:00:39 -0400

136 lines

Re: CLEANED UP MY ACT BUT FOR IPC

Bill Christoffel <[log in to unmask]>

Thu, 12 Sep 2002 13:34:49 -0500

158 lines

Re: CLEANED UP MY ACT BUT FOR IPC

Jason W. Gregory <[log in to unmask]>

Thu, 12 Sep 2002 16:48:25 -0500

81 lines

Re: CLEANED UP MY ACT BUT FOR IPC

Lum Wee Mei <[log in to unmask]>

Fri, 13 Sep 2002 12:45:08 +0800

117 lines

Re: CLEANED UP MY ACT BUT FOR IPC

Dieselberg, Ron <[log in to unmask]>

Thu, 19 Sep 2002 08:27:05 -0400

179 lines

New Thread

Cleaning Aluminum

Cleaning Aluminum

Morse, Carrie <[log in to unmask]>

Mon, 9 Sep 2002 16:24:57 -0400

51 lines

Re: Cleaning Aluminum

[log in to unmask]

Mon, 9 Sep 2002 15:53:51 -0500

31 lines

Re: Cleaning Aluminum

tony steinke <[log in to unmask]>

Mon, 9 Sep 2002 17:11:06 -0700

81 lines

Re: Cleaning Aluminum

Leo Roos <[log in to unmask]>

Mon, 9 Sep 2002 15:57:16 -0700

88 lines

Re: Cleaning Aluminum

Dave Hillman <[log in to unmask]>

Tue, 10 Sep 2002 07:26:15 -0500

97 lines

Re: Cleaning Aluminum

Brummer Chuck <[log in to unmask]>

Tue, 10 Sep 2002 07:51:50 -0700

240 lines

Re: Cleaning Aluminum

Dave Hillman <[log in to unmask]>

Tue, 10 Sep 2002 18:54:12 -0500

175 lines

New Thread

Cleanliness of no-clean before conformal coating

Cleanliness of no-clean before conformal coating

Tempea, Ioan <[log in to unmask]>

Tue, 10 Sep 2002 09:06:48 -0400

47 lines

Re: Cleanliness of no-clean before conformal coating

Graham Collins <[log in to unmask]>

Tue, 10 Sep 2002 12:35:29 -0400

98 lines

Re: Cleanliness of no-clean before conformal coating

David Douthit <[log in to unmask]>

Tue, 10 Sep 2002 10:39:12 -0700

92 lines

Re: Cleanliness of no-clean before conformal coating

Werner Engelmaier <[log in to unmask]>

Tue, 10 Sep 2002 17:05:19 EDT

41 lines

Re: Cleanliness of no-clean before conformal coating

David Douthit <[log in to unmask]>

Wed, 11 Sep 2002 10:14:51 -0700

70 lines

Re: Cleanliness of no-clean before conformal coating

[log in to unmask]

Wed, 11 Sep 2002 16:10:45 -0500

101 lines

Re: Cleanliness of no-clean before conformal coating

[log in to unmask]

Wed, 11 Sep 2002 16:48:53 -0500

214 lines

Re: Cleanliness of no-clean before conformal coating

Werner Engelmaier <[log in to unmask]>

Wed, 11 Sep 2002 21:10:10 EDT

49 lines

New Thread

Close pitch PCB failure

Close pitch PCB failure

Rob Eason <[log in to unmask]>

Wed, 18 Sep 2002 10:20:00 -0700

41 lines

Re: Close pitch PCB failure

[log in to unmask]

Wed, 18 Sep 2002 14:37:16 -0400

34 lines

Re: Close pitch PCB failure

Rob Eason <[log in to unmask]>

Wed, 18 Sep 2002 13:41:12 -0700

86 lines

Re: Close pitch PCB failure

[log in to unmask]

Thu, 19 Sep 2002 07:57:33 +0800

100 lines

Re: Close pitch PCB failure

Mcmaster, Michael <[log in to unmask]>

Wed, 18 Sep 2002 17:46:33 -0700

380 lines

Re: Close pitch PCB failure

Eddie Rocha <[log in to unmask]>

Thu, 19 Sep 2002 09:24:22 -0700

43 lines

New Thread

Component Guide/charts

Component Guide/charts

Dennis Bang <[log in to unmask]>

Mon, 23 Sep 2002 17:11:21 +1000

31 lines

Re: Component Guide/charts

Randy Bock Sr. <[log in to unmask]>

Mon, 23 Sep 2002 08:24:31 -0400

62 lines

Re: Component Guide/charts

Tempea, Ioan <[log in to unmask]>

Mon, 23 Sep 2002 08:27:32 -0400

65 lines

Re: Component Guide/charts

Ed Valentine <[log in to unmask]>

Mon, 23 Sep 2002 11:50:44 -0400

71 lines

Re: Component Guide/charts

Daan Terstegge <[log in to unmask]>

Mon, 23 Sep 2002 19:58:40 +0200

174 lines

Re: Component Guide/charts

[log in to unmask]

Tue, 24 Sep 2002 07:42:50 +0800

82 lines

Re: Component Guide/charts

Dennis Bang <[log in to unmask]>

Tue, 24 Sep 2002 09:51:30 +1000

107 lines

New Thread

Conformask 2523

Conformask 2523

May William D (Dean) CNIN <[log in to unmask]>

Mon, 16 Sep 2002 14:47:23 -0500

106 lines

Re: Conformask 2523

Leo Roos <[log in to unmask]>

Mon, 16 Sep 2002 20:47:33 -0700

96 lines

Re: Conformask 2523

May William D (Dean) CNIN <[log in to unmask]>

Tue, 17 Sep 2002 08:02:49 -0500

135 lines

New Thread

Contact Plated Finish

Contact Plated Finish

Victor Hernandez <[log in to unmask]>

Tue, 17 Sep 2002 13:29:18 -0500

32 lines

Re: Contact Plated Finish

David Douthit <[log in to unmask]>

Tue, 17 Sep 2002 17:24:41 -0700

59 lines

Re: Contact Plated Finish

Crepeau, Phil <[log in to unmask]>

Wed, 18 Sep 2002 10:09:20 -0700

104 lines

Re: Contact Plated Finish

Victor Hernandez <[log in to unmask]>

Wed, 18 Sep 2002 14:52:39 -0500

127 lines

Re: Contact Plated Finish

[log in to unmask]

Thu, 19 Sep 2002 07:48:08 +0800

160 lines

Re: Contact Plated Finish

David Douthit <[log in to unmask]>

Wed, 18 Sep 2002 17:11:08 -0700

161 lines

Re: Contact Plated Finish

joyce <[log in to unmask]>

Thu, 19 Sep 2002 08:04:30 -0400

222 lines

New Thread

controlled impedance calculations..

controlled impedance calculations..

Sergio T. Ruiz <[log in to unmask]>

Thu, 26 Sep 2002 15:15:21 -0400

39 lines

Re: controlled impedance calculations..

Ray Klein <[log in to unmask]>

Thu, 26 Sep 2002 15:11:44 -0700

43 lines

New Thread

Copper Tin Intermetallic Growth Rate

Copper Tin Intermetallic Growth Rate

Ted Edwards <[log in to unmask]>

Sat, 7 Sep 2002 10:39:58 -0700

116 lines

Re: Copper Tin Intermetallic Growth Rate

Rudy Sedlak <[log in to unmask]>

Sat, 7 Sep 2002 20:39:56 EDT

70 lines

Re: Copper Tin Intermetallic Growth Rate

Earl Moon <[log in to unmask]>

Sat, 7 Sep 2002 20:36:35 -0500

23 lines

Re: Copper Tin Intermetallic Growth Rate

Brian Ellis <[log in to unmask]>

Sun, 8 Sep 2002 10:07:08 +0300

98 lines

Re: Copper Tin Intermetallic Growth Rate

Werner Engelmaier <[log in to unmask]>

Sun, 8 Sep 2002 11:59:59 EDT

28 lines

Re: Copper Tin Intermetallic Growth Rate

Earl Moon <[log in to unmask]>

Sun, 8 Sep 2002 11:41:37 -0600

63 lines

Re: Copper Tin Intermetallic Growth Rate

Guy Ramsey <[log in to unmask]>

Mon, 9 Sep 2002 08:07:48 -0400

191 lines

Re: Copper Tin Intermetallic Growth Rate

joyce <[log in to unmask]>

Mon, 9 Sep 2002 08:17:23 -0400

56 lines

Re: Copper Tin Intermetallic Growth Rate

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 08:16:48 -0500

36 lines

Re: Copper Tin Intermetallic Growth Rate

Dave Hillman <[log in to unmask]>

Mon, 9 Sep 2002 09:01:16 -0500

120 lines

Re: Copper Tin Intermetallic Growth Rate

Brian Ellis <[log in to unmask]>

Mon, 9 Sep 2002 18:56:50 +0300

119 lines

Re: Copper Tin Intermetallic Growth Rate

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 11:21:20 -0500

26 lines

Re: Copper Tin Intermetallic Growth Rate

Werner Engelmaier <[log in to unmask]>

Mon, 9 Sep 2002 13:28:12 EDT

27 lines

New Thread

Corrosive Test Methods

Corrosive Test Methods

David Hannick <[log in to unmask]>

Mon, 9 Sep 2002 16:50:04 +0100

51 lines

New Thread

Difference in TERMINOLOGY

Difference in TERMINOLOGY

Victor Hernandez <[log in to unmask]>

Fri, 6 Sep 2002 12:56:57 -0500

35 lines

Re: Difference in TERMINOLOGY

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 13:00:30 -0600

68 lines

Re: Difference in TERMINOLOGY

Dan R. Johnson <[log in to unmask]>

Fri, 6 Sep 2002 12:36:26 -0700

32 lines

Re: Difference in TERMINOLOGY

Mark Hargreaves <[log in to unmask]>

Fri, 6 Sep 2002 16:01:28 -0400

56 lines

Re: Difference in TERMINOLOGY

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 15:44:08 -0500

32 lines

Re: Difference in TERMINOLOGY

Victor Hernandez <[log in to unmask]>

Sun, 8 Sep 2002 10:53:10 -0500

111 lines

Re: Difference in TERMINOLOGY

Earl Moon <[log in to unmask]>

Sun, 8 Sep 2002 13:04:24 -0500

53 lines

New Thread

dk for flex

dk for flex

Rick <[log in to unmask]>

Wed, 25 Sep 2002 09:07:43 -0400

29 lines

New Thread

Double coated copper

Double coated copper

Oliver Yeo <[log in to unmask]>

Fri, 6 Sep 2002 15:37:10 +0930

50 lines

Re: Double coated copper

Mark Hargreaves <[log in to unmask]>

Fri, 6 Sep 2002 08:06:17 -0400

77 lines

Re: Double coated copper

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 08:50:50 -0500

27 lines

Re: Double coated copper

Brummer Chuck <[log in to unmask]>

Fri, 6 Sep 2002 08:11:53 -0700

238 lines

New Thread

Dull Joint on the Gold plated PCB.

Dull Joint on the Gold plated PCB.

pohkh <[log in to unmask]>

Thu, 19 Sep 2002 21:18:36 +0800

32 lines

Re: Dull Joint on the Gold plated PCB.

Dave Hillman <[log in to unmask]>

Thu, 19 Sep 2002 08:45:08 -0500

76 lines

Re: Dull Joint on the Gold plated PCB.

Henry Rekers <[log in to unmask]>

Thu, 19 Sep 2002 08:49:06 -0700

107 lines

Re: Dull Joint on the Gold plated PCB.

Dave Chapman <[log in to unmask]>

Thu, 19 Sep 2002 12:32:54 -0500

137 lines

New Thread

DuPont (or alternative) conductive via fill

DuPont (or alternative) conductive via fill

Dougal Stewart <[log in to unmask]>

Fri, 27 Sep 2002 10:19:32 +0100

98 lines

New Thread

DuPont Pyralux Materials

DuPont Pyralux Materials

Steve kelly <[log in to unmask]>

Mon, 16 Sep 2002 12:33:56 -0400

122 lines

Re: DuPont Pyralux Materials

Jana Carraway <[log in to unmask]>

Mon, 16 Sep 2002 11:16:02 -0700

186 lines

New Thread

ECWC9-ECP2002 Newsflash Issue #2, September, 2002

ECWC9-ECP2002 Newsflash Issue #2, September, 2002

Keach Sasamori <[log in to unmask]>

Tue, 10 Sep 2002 14:34:38 -0500

763 lines

New Thread

ECWC9_ECP Newsletter #3

ECWC9_ECP Newsletter #3

Keach Sasamori <[log in to unmask]>

Fri, 13 Sep 2002 17:02:31 -0500

609 lines

New Thread

Eddy Current Soldering

Eddy Current Soldering

Cathy Killen <[log in to unmask]>

Thu, 5 Sep 2002 16:28:50 +0100

33 lines

Re: Eddy Current Soldering

Dave Hillman <[log in to unmask]>

Thu, 5 Sep 2002 12:04:12 -0500

77 lines

New Thread

edge clip for hybrid

edge clip for hybrid

joyce <[log in to unmask]>

Mon, 30 Sep 2002 09:26:45 -0400

73 lines

Re: edge clip for hybrid

Creswick, Steven <[log in to unmask]>

Mon, 30 Sep 2002 10:40:31 -0400

160 lines

Re: edge clip for hybrid

[log in to unmask]

Tue, 1 Oct 2002 07:42:12 +0800

66 lines

New Thread

Electra users, willing to share?

Electra users, willing to share?

Steve Gregory <[log in to unmask]>

Sun, 8 Sep 2002 23:28:58 EDT

67 lines

Re: Electra users, willing to share?

Earl Moon <[log in to unmask]>

Sun, 8 Sep 2002 23:49:09 -0600

199 lines

New Thread

electroless gold service

electroless gold service

Eddie Rocha <[log in to unmask]>

Thu, 12 Sep 2002 11:10:00 -0700

22 lines

New Thread

Emptying wave solder pot

Re: Emptying wave solder pot

Dieselberg, Ron <[log in to unmask]>

Tue, 17 Sep 2002 10:26:18 -0400

181 lines

New Thread

Emptying Wave Solder Pot...An Epilog

Emptying Wave Solder Pot...An Epilog

Steve Gregory <[log in to unmask]>

Thu, 5 Sep 2002 12:22:48 EDT

102 lines

Re: Emptying Wave Solder Pot...An Epilog

Randy Bock Sr. <[log in to unmask]>

Thu, 5 Sep 2002 14:04:34 -0400

175 lines

Re: Emptying Wave Solder Pot...An Epilog

Steve Gregory <[log in to unmask]>

Thu, 5 Sep 2002 16:53:40 EDT

78 lines

Re: Emptying Wave Solder Pot...An Epilog

Earl Moon <[log in to unmask]>

Thu, 5 Sep 2002 17:00:21 -0500

33 lines

Re: Emptying Wave Solder Pot...An Epilog

Jason W. Gregory <[log in to unmask]>

Thu, 5 Sep 2002 19:47:51 -0500

131 lines

Re: Emptying Wave Solder Pot...An Epilog

Steve Gregory <[log in to unmask]>

Thu, 5 Sep 2002 21:26:02 EDT

64 lines

Re: Emptying Wave Solder Pot...An Epilog

Randy Bock Sr. <[log in to unmask]>

Fri, 6 Sep 2002 10:00:19 -0400

157 lines

New Thread

ESD ADV 20.20

ESD ADV 20.20

Ong Seet Leng <[log in to unmask]>

Wed, 11 Sep 2002 09:34:17 +0800

68 lines

Re: ESD ADV 20.20

Juan T. Marugán <[log in to unmask]>

Wed, 11 Sep 2002 01:37:50 -0500

37 lines

Re: ESD ADV 20.20

Steve Gregory <[log in to unmask]>

Wed, 11 Sep 2002 10:27:00 EDT

76 lines

Re: ESD ADV 20.20

Gene Felder <[log in to unmask]>

Wed, 11 Sep 2002 08:57:20 -0700

71 lines

Re: ESD ADV 20.20

Richard Brennan <[log in to unmask]>

Wed, 11 Sep 2002 17:21:54 +0100

429 lines

Re: ESD ADV 20.20

Earl Moon <[log in to unmask]>

Wed, 11 Sep 2002 10:47:39 -0600

152 lines

Re: ESD ADV 20.20

Gujral, Mohit <[log in to unmask]>

Wed, 11 Sep 2002 10:44:37 -0700

153 lines

Re: ESD ADV 20.20

Ong Seet Leng <[log in to unmask]>

Thu, 12 Sep 2002 12:34:28 +0800

342 lines

New Thread

FACILITY TOURS, NEW ADDITIONS, EDUCATION...still time to register for the Designers Learning Symposium in Toronto

FACILITY TOURS, NEW ADDITIONS, EDUCATION...still time to register for the Designers Learning Symposium in Toronto

Keach Sasamori <[log in to unmask]>

Wed, 25 Sep 2002 16:13:25 -0500

269 lines

New Thread

FW: Polyimide cure

FW: Polyimide cure

Tim Reeves <[log in to unmask]>

Thu, 19 Sep 2002 10:41:01 -0700

114 lines

New Thread

GALVANIC Metal Chart

GALVANIC Metal Chart

Victor Hernandez <[log in to unmask]>

Thu, 19 Sep 2002 08:53:43 -0500

27 lines

Re: GALVANIC Metal Chart

Richard Brennan <[log in to unmask]>

Thu, 19 Sep 2002 16:16:38 +0100

68 lines

Re: GALVANIC Metal Chart

Phil Nutting <[log in to unmask]>

Thu, 19 Sep 2002 11:40:16 -0400

56 lines

Re: GALVANIC Metal Chart

Jana Carraway <[log in to unmask]>

Thu, 19 Sep 2002 09:50:05 -0700

57 lines

Re: GALVANIC Metal Chart

Rudy Sedlak <[log in to unmask]>

Thu, 19 Sep 2002 13:39:31 EDT

40 lines

Galvanic Metal Chart

Victor Hernandez <[log in to unmask]>

Thu, 19 Sep 2002 13:14:33 -0500

31 lines

Re: GALVANIC Metal Chart

David Douthit <[log in to unmask]>

Thu, 19 Sep 2002 13:08:01 -0700

68 lines

New Thread

Galvanic Scale - the links

Galvanic Scale - the links

Phil Nutting <[log in to unmask]>

Fri, 20 Sep 2002 08:29:32 -0400

34 lines

New Thread

gold wire bonding

gold wire bonding

Steve kelly <[log in to unmask]>

Tue, 17 Sep 2002 16:29:41 -0400

122 lines

Re: gold wire bonding

Creswick, Steven <[log in to unmask]>

Wed, 18 Sep 2002 05:09:40 -0400

165 lines

Re: gold wire bonding

Bresnan, Thomas <[log in to unmask]>

Wed, 18 Sep 2002 06:05:39 -0700

157 lines

Re: gold wire bonding

Steve kelly <[log in to unmask]>

Wed, 18 Sep 2002 09:37:20 -0400

318 lines

Re: gold wire bonding

Bill Christoffel <[log in to unmask]>

Wed, 18 Sep 2002 11:20:49 -0500

186 lines

Re: gold wire bonding

Hammond <[log in to unmask]>

Thu, 19 Sep 2002 21:17:23 +0100

249 lines

Re: gold wire bonding

George Milad <[log in to unmask]>

Sat, 21 Sep 2002 12:39:15 EDT

69 lines

Re: gold wire bonding

Steve kelly <[log in to unmask]>

Mon, 23 Sep 2002 09:21:27 -0400

251 lines

Re: gold wire bonding

Bill Christoffel <[log in to unmask]>

Mon, 23 Sep 2002 08:24:22 -0500

179 lines

New Thread

HASL

HASL

Tom Parkinson - Quality System Manager - WinTronics, Inc. <[log in to unmask]>

Mon, 23 Sep 2002 15:42:10 -0400

39 lines

Re: HASL

McGlaughlin, Jeffrey A <[log in to unmask]>

Mon, 23 Sep 2002 16:52:11 -0400

79 lines

Re: HASL

Glynn Shaw <[log in to unmask]>

Mon, 23 Sep 2002 14:10:11 -0700

62 lines

Re: HASL

Daan Terstegge <[log in to unmask]>

Mon, 23 Sep 2002 23:06:36 +0200

195 lines

Re: HASL

Ken Carlile <[log in to unmask]>

Mon, 23 Sep 2002 17:41:15 -0400

91 lines

Re: HASL

Brooks,Bill <[log in to unmask]>

Mon, 23 Sep 2002 15:23:28 -0700

76 lines

Re: HASL

Kathy Kuhlow <[log in to unmask]>

Mon, 23 Sep 2002 17:13:07 -0500

78 lines

New Thread

HASL/Gold Finish

HASL/Gold Finish

Michael Bell <[log in to unmask]>

Thu, 26 Sep 2002 09:40:43 +1200

68 lines

Re: HASL/Gold Finish

Dougal Stewart <[log in to unmask]>

Thu, 26 Sep 2002 09:26:48 +0100

115 lines

New Thread

Heel strap conductivity

Re: Heel strap conductivity

Dieselberg, Ron <[log in to unmask]>

Mon, 16 Sep 2002 14:49:15 -0400

185 lines

Re: Heel strap conductivity

Phil Nutting <[log in to unmask]>

Mon, 16 Sep 2002 17:00:49 -0400

243 lines

Re: Heel strap conductivity

Charles Caswell <[log in to unmask]>

Tue, 17 Sep 2002 07:09:17 -0500

251 lines

Heel strap conductivity

Bill Page <[log in to unmask]>

Tue, 17 Sep 2002 07:44:40 -0500

30 lines

New Thread

Help on obsolete assemblies

Help on obsolete assemblies

Graham Naisbitt <[log in to unmask]>

Fri, 27 Sep 2002 14:11:20 +0100

56 lines

Re: Help on obsolete assemblies

Steve Gregory <[log in to unmask]>

Fri, 27 Sep 2002 10:12:01 EDT

116 lines

New Thread

High Mix? Turnover? Quality?

High Mix? Turnover? Quality?

Henry Rekers <[log in to unmask]>

Tue, 10 Sep 2002 11:24:53 -0700

29 lines

Re: High Mix? Turnover? Quality?

Marsico, James <[log in to unmask]>

Wed, 11 Sep 2002 07:47:38 -0400

70 lines

New Thread

High temp pastes for wave soldering...

Re: High temp pastes for wave soldering...

Steve Gregory <[log in to unmask]>

Fri, 6 Sep 2002 15:19:59 EDT

123 lines

Re: High temp pastes for wave soldering...

Guy Ramsey <[log in to unmask]>

Fri, 6 Sep 2002 16:14:08 -0400

230 lines

New Thread

High temp. solder on bottom side SMT

Re: High temp. solder on bottom side SMT

Steve Thomas <[log in to unmask]>

Fri, 6 Sep 2002 14:32:07 -0700

94 lines

New Thread

HMP Solder Paste

HMP Solder Paste

Diamond, Pat <[log in to unmask]>

Thu, 19 Sep 2002 10:45:17 +0100

59 lines

Re: HMP Solder Paste

Phillip Hinton <[log in to unmask]>

Thu, 19 Sep 2002 10:38:30 EDT

64 lines

Re: HMP Solder Paste

Mike Fenner <[log in to unmask]>

Thu, 19 Sep 2002 16:33:13 +0100

185 lines

Re: HMP Solder Paste

Mike Fenner <[log in to unmask]>

Fri, 20 Sep 2002 13:42:39 +0100

233 lines

New Thread

Hole size specification

Hole size specification

Dan R. Johnson <[log in to unmask]>

Wed, 11 Sep 2002 14:09:22 -0700

72 lines

Re: Hole size specification

Eddie Rocha <[log in to unmask]>

Thu, 12 Sep 2002 11:02:03 -0700

28 lines

New Thread

How to clean gold flash over nickle prior to assembly

How to clean gold flash over nickle prior to assembly

Barbara Burcham <[log in to unmask]>

Mon, 16 Sep 2002 11:30:03 -0500

32 lines

Re: How to clean gold flash over nickle prior to assembly

Rudy Sedlak <[log in to unmask]>

Mon, 16 Sep 2002 14:58:29 EDT

34 lines

New Thread

How to use gold finished boards that have been handled?

How to use gold finished boards that have been handled?

Barbara Burcham <[log in to unmask]>

Thu, 19 Sep 2002 11:18:35 -0500

35 lines

Re: How to use gold finished boards that have been handled?

Charles Caswell <[log in to unmask]>

Thu, 19 Sep 2002 13:28:30 -0500

72 lines

Re: How to use gold finished boards that have been handled?

Morse, Carrie <[log in to unmask]>

Thu, 19 Sep 2002 14:46:48 -0400

63 lines

Re: How to use gold finished boards that have been handled?

joyce <[log in to unmask]>

Thu, 19 Sep 2002 17:24:53 -0400

89 lines

Re: How to use gold finished boards that have been handled?

Mike Fenner <[log in to unmask]>

Mon, 23 Sep 2002 08:13:01 +0100

101 lines

Re: How to use gold finished boards that have been handled?

Sasha Miladinovic <[log in to unmask]>

Wed, 25 Sep 2002 15:54:53 +0200

130 lines

Re: How to use gold finished boards that have been handled?

Dan R. Johnson <[log in to unmask]>

Wed, 25 Sep 2002 08:56:57 -0700

27 lines

Re: How to use gold finished boards that have been handled?

joyce <[log in to unmask]>

Thu, 26 Sep 2002 15:48:21 -0400

59 lines

New Thread

Humiseal 1B31 LOC Compatible with No-Clean?

Humiseal 1B31 LOC Compatible with No-Clean?

Rick Thompson <[log in to unmask]>

Tue, 24 Sep 2002 10:50:00 -0700

38 lines

Re: Humiseal 1B31 LOC Compatible with No-Clean?

Barmuta, Mike <[log in to unmask]>

Tue, 24 Sep 2002 14:22:45 -0700

111 lines

Re: Humiseal 1B31 LOC Compatible with No-Clean?

Graham Naisbitt <[log in to unmask]>

Thu, 26 Sep 2002 11:44:16 +0100

178 lines

Re: Humiseal 1B31 LOC Compatible with No-Clean?

Barmuta, Mike <[log in to unmask]>

Thu, 26 Sep 2002 08:35:53 -0700

247 lines

New Thread

I'm gone again

I'm gone again

Earl Moon <[log in to unmask]>

Tue, 10 Sep 2002 19:39:13 -0500

43 lines

Re: I'm gone again

Werner Engelmaier <[log in to unmask]>

Tue, 10 Sep 2002 23:01:23 EDT

28 lines

Re: I'm gone again

Richard Hamilton <[log in to unmask]>

Tue, 10 Sep 2002 20:10:08 -0700

52 lines

Re: I'm gone again

Earl Moon <[log in to unmask]>

Wed, 11 Sep 2002 00:36:06 -0600

69 lines

Re: I'm gone again

Earl Moon <[log in to unmask]>

Wed, 11 Sep 2002 00:39:05 -0600

83 lines

Re: I'm gone again

Eric Dawson <[log in to unmask]>

Wed, 11 Sep 2002 09:58:34 +0100

105 lines

Re: I'm gone again

Barry Gallegos <[log in to unmask]>

Wed, 11 Sep 2002 06:55:06 -0600

132 lines

Re: I'm gone again

Victor Hernandez <[log in to unmask]>

Thu, 12 Sep 2002 06:34:37 -0500

140 lines

Re: I'm gone again

Henry Rekers <[log in to unmask]>

Thu, 12 Sep 2002 13:09:51 -0700

163 lines

Re: I'm gone again

Earl Moon <[log in to unmask]>

Thu, 12 Sep 2002 15:22:27 -0500

45 lines

Re: I'm gone again

Steve Thomas <[log in to unmask]>

Thu, 12 Sep 2002 14:03:55 -0700

48 lines

Re: I'm gone again

Roger Stoops <[log in to unmask]>

Thu, 12 Sep 2002 17:06:03 -0400

66 lines

Re: I'm gone again

Joe Fjelstad <[log in to unmask]>

Thu, 12 Sep 2002 17:56:08 EDT

70 lines

Re: I'm gone again

Unk Eng <[log in to unmask]>

Thu, 12 Sep 2002 16:12:09 -0700

149 lines

Re: I'm gone again

Steve Thomas <[log in to unmask]>

Thu, 12 Sep 2002 16:45:16 -0700

232 lines

Re: I'm gone again

Steve Gregory <[log in to unmask]>

Thu, 12 Sep 2002 20:55:16 EDT

383 lines

Re: I'm gone again

Earl Moon <[log in to unmask]>

Thu, 12 Sep 2002 21:23:42 -0500

36 lines

Re: I'm gone again

Croslin, Robert <[log in to unmask]>

Fri, 13 Sep 2002 08:07:54 -0400

203 lines

Re: I'm gone again

Randy Bock Sr. <[log in to unmask]>

Fri, 13 Sep 2002 08:41:29 -0400

219 lines

Re: I'm gone again

Barry Gallegos <[log in to unmask]>

Fri, 13 Sep 2002 07:09:07 -0600

265 lines

Re: I'm gone again

Dave Hornback <[log in to unmask]>

Fri, 13 Sep 2002 08:25:20 -0700

59 lines

Re: I'm gone again

Sauer, Steven T. <[log in to unmask]>

Fri, 13 Sep 2002 13:23:53 -0400

228 lines

Re: I'm gone again

Ed Popielarski <[log in to unmask]>

Fri, 13 Sep 2002 18:20:49 -0700

171 lines

Re: I'm gone again

Randy Bock Sr. <[log in to unmask]>

Sat, 14 Sep 2002 12:24:29 -0400

236 lines

Re: I'm gone again

Alcorn, Brent <[log in to unmask]>

Sat, 14 Sep 2002 12:24:52 -0400

228 lines

Re: I'm gone again

Eric Dawson <[log in to unmask]>

Mon, 16 Sep 2002 08:13:26 +0100

88 lines

Re: I'm gone again

Croslin, Robert <[log in to unmask]>

Mon, 16 Sep 2002 08:46:56 -0400

204 lines

Re: I'm gone again

Tim Reeves <[log in to unmask]>

Tue, 17 Sep 2002 09:28:49 -0700

139 lines

New Thread

I'm gone again - Earl Moon

I'm gone again - Earl Moon

Keach Sasamori <[log in to unmask]>

Mon, 16 Sep 2002 09:08:13 -0500

98 lines

Re: I'm gone again - Earl Moon

Randy Bock Sr. <[log in to unmask]>

Mon, 16 Sep 2002 11:41:21 -0400

167 lines

New Thread

Impact of Board Warpage on BGAs assembly

Impact of Board Warpage on BGAs assembly

Lum Wee Mei <[log in to unmask]>

Fri, 6 Sep 2002 15:41:17 +0800

37 lines

Re: Impact of Board Warpage on BGAs assembly

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 03:36:58 -0500

41 lines

Re: Impact of Board Warpage on BGAs assembly

joyce <[log in to unmask]>

Fri, 6 Sep 2002 08:44:54 -0400

65 lines

New Thread

Information about Benchmark in Obsolete Material

Information about Benchmark in Obsolete Material

Becerra Alejandro <[log in to unmask]>

Thu, 12 Sep 2002 11:31:16 -0500

84 lines

New Thread

Inspection Checklist

Inspection Checklist

Mike Kuczynski <[log in to unmask]>

Wed, 25 Sep 2002 07:23:10 -0400

109 lines

Re: Inspection Checklist

Morse, Carrie <[log in to unmask]>

Wed, 25 Sep 2002 10:30:33 -0400

180 lines

New Thread

INTEL P4 AND THE HEAT SINK THERMAL TAPE

INTEL P4 AND THE HEAT SINK THERMAL TAPE

Earl Moon <[log in to unmask]>

Sat, 7 Sep 2002 19:28:07 -0500

35 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Earl Moon <[log in to unmask]>

Sun, 8 Sep 2002 13:22:03 -0500

44 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Steve Gregory <[log in to unmask]>

Sun, 8 Sep 2002 16:17:57 EDT

130 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Earl Moon <[log in to unmask]>

Sun, 8 Sep 2002 15:28:38 -0500

38 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Steve Gregory <[log in to unmask]>

Sun, 8 Sep 2002 17:11:11 EDT

84 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Earl Moon <[log in to unmask]>

Sun, 8 Sep 2002 16:26:46 -0500

28 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

[log in to unmask]

Mon, 9 Sep 2002 10:19:29 +0800

104 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 00:56:56 -0500

36 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Brian L. Guidi <[log in to unmask]>

Mon, 9 Sep 2002 06:56:59 -0400

105 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Eric Dawson <[log in to unmask]>

Mon, 9 Sep 2002 13:55:48 +0100

141 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Brian Ellis <[log in to unmask]>

Mon, 9 Sep 2002 16:53:22 +0300

173 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Roger Stoops <[log in to unmask]>

Mon, 9 Sep 2002 09:56:10 -0400

208 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 08:41:04 -0600

196 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Don Vischulis <[log in to unmask]>

Mon, 9 Sep 2002 10:21:55 -0500

209 lines

Re: INTEL P4 AND THE HEAT SINK THERMAL TAPE

Brian L. Guidi <[log in to unmask]>

Mon, 9 Sep 2002 10:57:08 -0400

212 lines

New Thread

Ionograph measurements

Ionograph measurements

d. terstegge <[log in to unmask]>

Fri, 27 Sep 2002 08:36:45 +0200

39 lines

Re: Ionograph measurements

Tegehall Per-Erik <[log in to unmask]>

Fri, 27 Sep 2002 09:09:37 +0200

78 lines

Re: Ionograph measurements

John Boocock <[log in to unmask]>

Fri, 27 Sep 2002 10:17:31 +0100

89 lines

Re: Ionograph measurements

Graham Naisbitt <[log in to unmask]>

Fri, 27 Sep 2002 16:53:44 +0100

85 lines

Re: Ionograph measurements

Lim, Chee How <[log in to unmask]>

Fri, 27 Sep 2002 16:08:04 -0400

120 lines

Re: Ionograph measurements

Dieselberg, Ron <[log in to unmask]>

Mon, 30 Sep 2002 07:06:06 -0400

311 lines

Re: Ionograph measurements

Mel Parrish <[log in to unmask]>

Mon, 30 Sep 2002 07:57:16 -0500

407 lines

Re: Ionograph measurements

Sauer, Steven T. <[log in to unmask]>

Mon, 30 Sep 2002 08:57:12 -0400

42 lines

Re: Ionograph measurements

d. terstegge <[log in to unmask]>

Mon, 30 Sep 2002 14:02:48 +0100

170 lines

Re: Ionograph measurements

Tegehall Per-Erik <[log in to unmask]>

Mon, 30 Sep 2002 16:04:09 +0200

239 lines

Re: Ionograph measurements

Guy Ramsey <[log in to unmask]>

Mon, 30 Sep 2002 11:19:57 -0400

251 lines

Re: Ionograph measurements

Don Vischulis <[log in to unmask]>

Mon, 30 Sep 2002 10:20:27 -0500

202 lines

Re: Ionograph measurements

[log in to unmask]

Tue, 1 Oct 2002 07:50:11 +0800

329 lines

New Thread

IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Victor Hernandez <[log in to unmask]>

Thu, 5 Sep 2002 07:37:08 -0500

30 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Werner Engelmaier <[log in to unmask]>

Thu, 5 Sep 2002 10:29:39 EDT

34 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Thu, 5 Sep 2002 11:16:45 -0500

28 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Werner Engelmaier <[log in to unmask]>

Thu, 5 Sep 2002 14:40:47 EDT

25 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Thu, 5 Sep 2002 13:38:15 -0500

30 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Thu, 5 Sep 2002 14:13:30 -0500

53 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Victor Hernandez <[log in to unmask]>

Thu, 5 Sep 2002 15:58:36 -0500

58 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Victor Hernandez <[log in to unmask]>

Fri, 6 Sep 2002 06:49:38 -0500

65 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

[log in to unmask]

Fri, 6 Sep 2002 09:24:57 EDT

36 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Jack C. Olson <[log in to unmask]>

Fri, 6 Sep 2002 09:13:46 -0500

42 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 09:12:10 -0600

88 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Jack C. Olson <[log in to unmask]>

Fri, 6 Sep 2002 10:43:44 -0500

128 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 11:00:07 -0500

40 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Werner Engelmaier <[log in to unmask]>

Fri, 6 Sep 2002 15:17:42 EDT

34 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Jack C. Olson <[log in to unmask]>

Fri, 6 Sep 2002 14:25:04 -0500

85 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 14:33:32 -0500

38 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 14:06:23 -0600

72 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 15:19:02 -0500

51 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 15:37:56 -0600

77 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Werner Engelmaier <[log in to unmask]>

Fri, 6 Sep 2002 23:03:56 EDT

32 lines

Re: IPC-TM-650-2.6.8, Thermal stress, Plated Through Holes

Earl Moon <[log in to unmask]>

Sat, 7 Sep 2002 00:20:21 -0500

29 lines

New Thread

Is "Gerber Data" proper noun or noun?

Is "Gerber Data" proper noun or noun?

Michelle Huang <[log in to unmask]>

Fri, 6 Sep 2002 10:15:22 -0700

58 lines

New Thread

It ain't over til it's over so now it's over

Re: It ain't over til it's over so now it's over

Dieselberg, Ron <[log in to unmask]>

Mon, 16 Sep 2002 15:44:24 -0400

243 lines

Re: It ain't over til it's over so now it's over

Gregg A. Owens <[log in to unmask]>

Mon, 16 Sep 2002 15:58:28 -0700

603 lines

Re: It ain't over til it's over so now it's over

Randy Bock Sr. <[log in to unmask]>

Tue, 17 Sep 2002 07:40:37 -0400

343 lines

New Thread

Jim Herard/Endicott/IBM is out of the office.

Jim Herard/Endicott/IBM is out of the office.

Jim Herard <[log in to unmask]>

Fri, 13 Sep 2002 01:35:26 -0400

25 lines

New Thread

Laminate material for high-layer count PCB's

Laminate material for high-layer count PCB's

Steve Gregory <[log in to unmask]>

Tue, 24 Sep 2002 11:56:25 EDT

62 lines

New Thread

Looking for someone

Looking for someone

Chris Christian <[log in to unmask]>

Mon, 9 Sep 2002 08:14:26 -0400

92 lines

Re: Looking for someone

Cyker, Howard A (Howie) <[log in to unmask]>

Mon, 9 Sep 2002 10:01:56 -0400

160 lines

New Thread

Looking for very thin, Low Dk and Low loss material

Looking for very thin, Low Dk and Low loss material

SDC's Tech Net <[log in to unmask]>

Thu, 5 Sep 2002 19:29:59 -0700

35 lines

Re: Looking for very thin, Low Dk and Low loss material

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 02:29:53 -0600

78 lines

Re: Looking for very thin, Low Dk and Low loss material

Tim Reeves <[log in to unmask]>

Fri, 13 Sep 2002 08:20:10 -0700

42 lines

Re: Looking for very thin, Low Dk and Low loss material

Adair, Bret <[log in to unmask]>

Fri, 13 Sep 2002 09:28:32 -0700

248 lines

Re: Looking for very thin, Low Dk and Low loss material

Steve kelly <[log in to unmask]>

Fri, 13 Sep 2002 13:05:50 -0400

486 lines

New Thread

Manual Press for press fit connector

Manual Press for press fit connector

Peter Lee <[log in to unmask]>

Sat, 14 Sep 2002 00:53:32 -0700

34 lines

Re: Manual Press for press fit connector

Kasica, David (MED, GEMS-IT) <[log in to unmask]>

Sat, 14 Sep 2002 06:25:34 -0500

64 lines

Re: Manual Press for press fit connector

Rich Buccieri <[log in to unmask]>

Sat, 14 Sep 2002 12:35:39 -0500

64 lines

New Thread

Milkiness in cleaning solution

Milkiness in cleaning solution

Preethi Iyer <[log in to unmask]>

Tue, 3 Sep 2002 10:20:59 -0500

33 lines

Re: Milkiness in cleaning solution

[log in to unmask]

Tue, 3 Sep 2002 11:06:55 -0500

78 lines

Re: Milkiness in cleaning solution

Rudy Sedlak <[log in to unmask]>

Tue, 3 Sep 2002 12:37:18 EDT

26 lines

Re: Milkiness in cleaning solution

Piyer <[log in to unmask]>

Tue, 3 Sep 2002 14:05:43 -0400

54 lines

Re: Milkiness in cleaning solution

Rudy Sedlak <[log in to unmask]>

Tue, 3 Sep 2002 17:50:27 EDT

28 lines

Re: Milkiness in cleaning solution

b_ellis <[log in to unmask]>

Wed, 4 Sep 2002 10:31:26 +0300

99 lines

New Thread

Moisture sensitive parts

Moisture sensitive parts

Jim Jenkins <[log in to unmask]>

Wed, 18 Sep 2002 13:03:19 -0500

40 lines

Re: Moisture sensitive parts

Guy Ramsey <[log in to unmask]>

Wed, 18 Sep 2002 15:33:59 -0400

68 lines

Re: Moisture sensitive parts

joyce <[log in to unmask]>

Wed, 18 Sep 2002 16:12:49 -0400

77 lines

Re: Moisture sensitive parts

Kathy Kuhlow <[log in to unmask]>

Wed, 18 Sep 2002 15:13:23 -0500

92 lines

Re: Moisture sensitive parts

Lee Whiteman <[log in to unmask]>

Wed, 18 Sep 2002 17:16:40 -0400

112 lines

Re: Moisture sensitive parts

Charles Caswell <[log in to unmask]>

Wed, 18 Sep 2002 16:24:45 -0500

99 lines

Re: Moisture sensitive parts

[log in to unmask]

Thu, 19 Sep 2002 08:27:38 +0800

119 lines

New Thread

MoonMan and some interesting conference calls

MoonMan and some interesting conference calls

Earl Moon <[log in to unmask]>

Thu, 5 Sep 2002 04:54:22 -0500

93 lines

Re: MoonMan and some interesting conference calls

Victor Hernandez <[log in to unmask]>

Thu, 5 Sep 2002 07:46:51 -0500

134 lines

New Thread

MOONMAN'S BOOK ADDRESS

MOONMAN'S BOOK ADDRESS

Earl Moon <[log in to unmask]>

Tue, 3 Sep 2002 15:23:47 -0500

35 lines

Re: MOONMAN'S BOOK ADDRESS

Jana Carraway <[log in to unmask]>

Tue, 3 Sep 2002 15:17:18 -0700

69 lines

Re: MOONMAN'S BOOK ADDRESS

Earl Moon <[log in to unmask]>

Tue, 3 Sep 2002 17:07:58 -0500

24 lines

Re: MOONMAN'S BOOK ADDRESS

Earl Moon <[log in to unmask]>

Tue, 3 Sep 2002 17:33:18 -0500

35 lines

New Thread

MoonMan's book as reference material whether for sale or free

MoonMan's book as reference material whether for sale or free

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 12:21:24 -0500

52 lines

New Thread

MUX Failures...an update.

MUX Failures...an update.

Francois Monette <[log in to unmask]>

Tue, 3 Sep 2002 20:29:30 -0400

80 lines

New Thread

Need help relaying a message

Need help relaying a message

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 01:47:32 -0500

31 lines

Re: Need help relaying a message

JaMi Smith <[log in to unmask]>

Mon, 9 Sep 2002 02:07:22 -0700

82 lines

Re: Need help relaying a message

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 06:42:10 -0600

117 lines

New Thread

Noclean Wave soldering

Noclean Wave soldering

Peter Lee <[log in to unmask]>

Thu, 19 Sep 2002 23:10:26 -0700

36 lines

Re: Noclean Wave soldering

Gordon McAlpine <[log in to unmask]>

Fri, 20 Sep 2002 11:46:19 +0100

105 lines

Re: Noclean Wave soldering

Dave Hillman <[log in to unmask]>

Fri, 20 Sep 2002 09:13:41 -0500

81 lines

Re: Noclean Wave soldering

Randy Bock Sr. <[log in to unmask]>

Fri, 20 Sep 2002 12:03:01 -0400

123 lines

Re: Noclean Wave soldering

[log in to unmask]

Mon, 23 Sep 2002 07:39:01 +0800

176 lines

New Thread

NTC Re: [TN] Emptying Wave Solder Pot...An Epilog

NTC Re: [TN] Emptying Wave Solder Pot...An Epilog

Dan R. Johnson <[log in to unmask]>

Fri, 6 Sep 2002 10:57:49 -0700

28 lines

New Thread

NTC-Friday Treat...delete if you're not interested

NTC-Friday Treat...delete if you're not interested

Steve Gregory <[log in to unmask]>

Fri, 6 Sep 2002 17:33:00 EDT

69 lines

Re: NTC-Friday Treat...delete if you're not interested

James TerVeen <[log in to unmask]>

Mon, 9 Sep 2002 10:41:37 -0400

27 lines

New Thread

Off Topic - - - TONS of emails with attachments...

Off Topic - - - TONS of emails with attachments...

Carl VanWormer <[log in to unmask]>

Tue, 3 Sep 2002 08:08:02 -0700

169 lines

New Thread

Opto land pattern

Opto land pattern

Brian Bregoli <[log in to unmask]>

Tue, 24 Sep 2002 14:37:54 -0400

35 lines

Re: Opto land pattern

Steve Gregory <[log in to unmask]>

Tue, 24 Sep 2002 15:57:27 EDT

95 lines

Re: Opto land pattern

Brian Bregoli <[log in to unmask]>

Tue, 24 Sep 2002 16:47:41 -0400

197 lines

Re: Opto land pattern

Brian Bregoli <[log in to unmask]>

Tue, 24 Sep 2002 17:07:44 -0400

250 lines

New Thread

P4 SUCCESS AT LAST

P4 SUCCESS AT LAST

Earl Moon <[log in to unmask]>

Tue, 10 Sep 2002 17:56:01 -0500

32 lines

Re: P4 SUCCESS AT LAST

Earl Moon <[log in to unmask]>

Tue, 10 Sep 2002 18:14:08 -0500

29 lines

Re: P4 SUCCESS AT LAST

joyce <[log in to unmask]>

Wed, 11 Sep 2002 08:30:10 -0400

76 lines

New Thread

Paint stripper

Paint stripper

Diamond, Pat <[log in to unmask]>

Wed, 4 Sep 2002 09:21:31 +0100

36 lines

New Thread

PAINT STRIPPERS

PAINT STRIPPERS

Marsico, James <[log in to unmask]>

Tue, 3 Sep 2002 15:13:18 -0400

32 lines

Re: PAINT STRIPPERS

Rudy Sedlak <[log in to unmask]>

Tue, 3 Sep 2002 17:43:08 EDT

23 lines

Re: PAINT STRIPPERS

Leo Roos <[log in to unmask]>

Tue, 3 Sep 2002 17:29:08 -0700

67 lines

Re: PAINT STRIPPERS

b_ellis <[log in to unmask]>

Wed, 4 Sep 2002 10:09:08 +0300

75 lines

Re: PAINT STRIPPERS

Phil Kinner <[log in to unmask]>

Wed, 4 Sep 2002 10:22:30 +0100

219 lines

Re: PAINT STRIPPERS

Marsico, James <[log in to unmask]>

Wed, 4 Sep 2002 07:18:22 -0400

62 lines

Re: PAINT STRIPPERS

Brian Ellis <[log in to unmask]>

Wed, 4 Sep 2002 14:53:51 +0300

94 lines

Re: PAINT STRIPPERS

Tim Reeves <[log in to unmask]>

Thu, 5 Sep 2002 10:27:23 -0700

143 lines

New Thread

Panelisation Software

Panelisation Software

d. terstegge <[log in to unmask]>

Mon, 9 Sep 2002 17:45:48 +0200

41 lines

Re: Panelisation Software

Tempea, Ioan <[log in to unmask]>

Mon, 9 Sep 2002 13:30:29 -0400

74 lines

Re: Panelisation Software

Morse, Carrie <[log in to unmask]>

Mon, 9 Sep 2002 15:38:18 -0400

77 lines

Re: Panelisation Software

Earl Moon <[log in to unmask]>

Mon, 9 Sep 2002 14:37:15 -0500

31 lines

Re: Panelisation Software

d. terstegge <[log in to unmask]>

Tue, 10 Sep 2002 09:03:56 +0200

120 lines

Re: Panelisation Software

Matthias Mansfeld <[log in to unmask]>

Tue, 10 Sep 2002 10:37:52 +0200

50 lines

Re: Panelisation Software

Croslin, Robert <[log in to unmask]>

Tue, 10 Sep 2002 08:23:14 -0400

112 lines

Re: Panelisation Software

Tempea, Ioan <[log in to unmask]>

Tue, 10 Sep 2002 08:31:45 -0400

150 lines

Re: Panelisation Software

Earl Moon <[log in to unmask]>

Tue, 10 Sep 2002 07:26:18 -0600

165 lines

New Thread

Part Consolidation

Re: Part Consolidation

Smith, Richard <[log in to unmask]>

Thu, 5 Sep 2002 10:26:44 -0400

70 lines

New Thread

Parylene coating military electronics

Parylene coating military electronics

Long, Thomas <[log in to unmask]>

Fri, 27 Sep 2002 10:32:08 -0500

205 lines

Re: Parylene coating military electronics

Graham Collins <[log in to unmask]>

Fri, 27 Sep 2002 13:05:10 -0400

94 lines

Re: Parylene coating military electronics

Creswick, Steven <[log in to unmask]>

Fri, 27 Sep 2002 13:35:47 -0400

224 lines

Re: Parylene coating military electronics

Crepeau, Phil <[log in to unmask]>

Fri, 27 Sep 2002 10:50:12 -0700

305 lines

Re: Parylene coating military electronics

[log in to unmask]

Mon, 30 Sep 2002 08:22:57 +0800

109 lines

Re: Parylene coating military electronics

Juan T. Marugán <[log in to unmask]>

Mon, 30 Sep 2002 01:54:08 -0500

42 lines

New Thread

PCB design with mask over vias.

PCB design with mask over vias.

Willie Duersch <[log in to unmask]>

Fri, 27 Sep 2002 14:00:55 -0500

55 lines

Re: PCB design with mask over vias.

Guy Ramsey <[log in to unmask]>

Fri, 27 Sep 2002 17:54:14 -0400

126 lines

Re: PCB design with mask over vias.

Dave Chapman <[log in to unmask]>

Mon, 30 Sep 2002 05:02:22 -0500

91 lines

Re: PCB design with mask over vias.

[log in to unmask]

Tue, 1 Oct 2002 07:39:08 +0800

145 lines

Re: PCB design with mask over vias.

Werner Engelmaier <[log in to unmask]>

Mon, 30 Sep 2002 23:46:18 EDT

26 lines

New Thread

PCB's and a trip to the bank

PCB's and a trip to the bank

Earl Moon <[log in to unmask]>

Thu, 5 Sep 2002 13:39:37 -0500

101 lines

Re: PCB's and a trip to the bank

Werner Engelmaier <[log in to unmask]>

Fri, 6 Sep 2002 15:17:43 EDT

29 lines

Re: PCB's and a trip to the bank

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 14:04:23 -0600

69 lines

Re: PCB's and a trip to the bank

Brian Ellis <[log in to unmask]>

Sat, 7 Sep 2002 09:20:35 +0300

129 lines

Re: PCB's and a trip to the bank

Earl Moon <[log in to unmask]>

Sat, 7 Sep 2002 08:39:43 -0500

41 lines

Re: PCB's and a trip to the bank

Brian Ellis <[log in to unmask]>

Sat, 7 Sep 2002 17:19:57 +0300

70 lines

Re: PCB's and a trip to the bank

Earl Moon <[log in to unmask]>

Sat, 7 Sep 2002 12:50:34 -0500

29 lines

Re: PCB's and a trip to the bank

Werner Engelmaier <[log in to unmask]>

Sun, 8 Sep 2002 12:00:00 EDT

24 lines

Re: PCB's and a trip to the bank

Earl Moon <[log in to unmask]>

Sun, 8 Sep 2002 11:38:17 -0600

62 lines

New Thread

phenolic boards

phenolic boards

Zweigart, Siegmund <[log in to unmask]>

Tue, 24 Sep 2002 09:38:42 +0200

27 lines

Re: phenolic boards

Don Vischulis <[log in to unmask]>

Tue, 24 Sep 2002 11:34:06 -0500

64 lines

New Thread

plating question

plating question

Carl VanWormer <[log in to unmask]>

Wed, 18 Sep 2002 08:43:35 -0700

71 lines

New Thread

POLAR INSTRUMENTS

POLAR INSTRUMENTS

Earl Moon <[log in to unmask]>

Wed, 4 Sep 2002 09:29:05 -0500

45 lines

Re: POLAR INSTRUMENTS

Race, Albert <[log in to unmask]>

Wed, 4 Sep 2002 11:11:20 -0400

85 lines

Re: POLAR INSTRUMENTS

Brian Ellis <[log in to unmask]>

Wed, 4 Sep 2002 18:17:17 +0300

71 lines

Re: POLAR INSTRUMENTS

Randy Bock Sr. <[log in to unmask]>

Wed, 4 Sep 2002 12:29:00 -0400

77 lines

Re: POLAR INSTRUMENTS

Damon DeSilva <[log in to unmask]>

Wed, 4 Sep 2002 12:45:34 -0400

82 lines

Re: POLAR INSTRUMENTS

Earl Moon <[log in to unmask]>

Wed, 4 Sep 2002 11:24:31 -0500

28 lines

Re: POLAR INSTRUMENTS

Eddie Rocha <[log in to unmask]>

Wed, 4 Sep 2002 11:55:07 -0700

23 lines

POLAR INSTRUMENTS

Gary Otonari <[log in to unmask]>

Thu, 5 Sep 2002 16:07:13 -0700

147 lines

New Thread

poor wetting- pcb or assy problem?

Re: poor wetting- pcb or assy problem?

Morse, Carrie <[log in to unmask]>

Tue, 3 Sep 2002 08:17:30 -0400

96 lines

Re: poor wetting- pcb or assy problem?

[log in to unmask]

Wed, 4 Sep 2002 07:46:08 +0800

133 lines

New Thread

Post HASL cleaning solution

Post HASL cleaning solution

Mark Hargreaves <[log in to unmask]>

Wed, 25 Sep 2002 09:08:28 -0400

36 lines

Re: Post HASL cleaning solution

Rudy Sedlak <[log in to unmask]>

Wed, 25 Sep 2002 14:21:28 EDT

48 lines

Re: Post HASL cleaning solution

Charles Caswell <[log in to unmask]>

Wed, 25 Sep 2002 13:31:50 -0500

79 lines

Re: Post HASL cleaning solution

Fineline Circuits, Inc. <[log in to unmask]>

Thu, 26 Sep 2002 17:16:50 -0700

73 lines

Re: Post HASL cleaning solution

Rudy Sedlak <[log in to unmask]>

Wed, 25 Sep 2002 19:13:08 EDT

35 lines

New Thread

Poyimide cure

Poyimide cure

[log in to unmask]

Wed, 18 Sep 2002 01:08:47 EDT

74 lines

Re: Poyimide cure

Mark Hargreaves <[log in to unmask]>

Wed, 18 Sep 2002 08:07:20 -0400

54 lines

Re: Poyimide cure

Graham Naisbitt <[log in to unmask]>

Wed, 18 Sep 2002 16:58:39 +0100

163 lines

Re: Poyimide cure

Tom Waznis <[log in to unmask]>

Wed, 18 Sep 2002 19:36:30 -0700

74 lines

Re: Poyimide cure

[log in to unmask]

Wed, 18 Sep 2002 23:05:35 EDT

54 lines

Re: Poyimide cure

joyce <[log in to unmask]>

Thu, 19 Sep 2002 08:10:20 -0400

112 lines

New Thread

pre-condition

pre-condition

joyce <[log in to unmask]>

Fri, 13 Sep 2002 13:55:49 -0400

30 lines

New Thread

Pros and Cons of BGAs v.s. CGAs

Pros and Cons of BGAs v.s. CGAs

Louis, Edwin @ CSE <[log in to unmask]>

Mon, 23 Sep 2002 14:54:19 -0400

27 lines

Re: Pros and Cons of BGAs v.s. CGAs

Higgins Leo <[log in to unmask]>

Wed, 25 Sep 2002 03:50:36 -0400

160 lines

New Thread

Qualification of In-line clearner

Qualification of In-line clearner

Peter Lee <[log in to unmask]>

Thu, 12 Sep 2002 07:41:17 -0700

48 lines

Re: Qualification of In-line clearner

Lee Whiteman <[log in to unmask]>

Thu, 12 Sep 2002 15:10:43 -0400

101 lines

Re: Qualification of In-line clearner

Daan Terstegge <[log in to unmask]>

Thu, 12 Sep 2002 22:41:14 +0200

198 lines

Re: Qualification of In-line clearner

[log in to unmask]

Thu, 12 Sep 2002 16:40:31 -0400

92 lines

New Thread

quality - 5 um base copper foil

quality - 5 um base copper foil

Thomas Beneken <[log in to unmask]>

Thu, 5 Sep 2002 14:03:40 +0200

48 lines

Re: quality - 5 um base copper foil

Werner Engelmaier <[log in to unmask]>

Thu, 5 Sep 2002 10:29:42 EDT

33 lines

New Thread

Quality Metrics

Quality Metrics

Henry Rekers <[log in to unmask]>

Wed, 18 Sep 2002 12:18:34 -0700

45 lines

Re: Quality Metrics

Dave Chapman <[log in to unmask]>

Thu, 19 Sep 2002 07:19:59 -0500

80 lines

Re: Quality Metrics

[log in to unmask]

Thu, 19 Sep 2002 16:48:27 EDT

68 lines

New Thread

radial lead spec. question

radial lead spec. question

Steve Thomas <[log in to unmask]>

Tue, 3 Sep 2002 14:49:58 -0700

52 lines

New Thread

Rejected posting to [log in to unmask]

Re: Rejected posting to [log in to unmask]

Thanongsak W <[log in to unmask]>

Fri, 6 Sep 2002 08:04:22 +0700

63 lines

New Thread

Reliability Testing 85/85

Reliability Testing 85/85

Victor Hernandez <[log in to unmask]>

Thu, 12 Sep 2002 09:28:59 -0500

29 lines

Re: Reliability Testing 85/85

Tim Reeves <[log in to unmask]>

Fri, 13 Sep 2002 08:02:45 -0700

39 lines

Re: Reliability Testing 85/85

Tim Reeves <[log in to unmask]>

Fri, 13 Sep 2002 08:10:32 -0700

44 lines

Re: Reliability Testing 85/85

Graham Naisbitt <[log in to unmask]>

Fri, 13 Sep 2002 17:37:56 +0100

73 lines

Re: Reliability Testing 85/85

Munie, Gregory <[log in to unmask]>

Mon, 16 Sep 2002 09:47:19 -0500

90 lines

Re: Reliability Testing 85/85

Graham Naisbitt <[log in to unmask]>

Mon, 16 Sep 2002 17:44:35 +0100

75 lines

Re: Reliability Testing 85/85

Werner Engelmaier <[log in to unmask]>

Mon, 16 Sep 2002 21:32:38 EDT

25 lines

New Thread

reliability testing with daisy chain parts

reliability testing with daisy chain parts

Bev Christian <[log in to unmask]>

Tue, 10 Sep 2002 15:14:00 -0400

47 lines

Re: reliability testing with daisy chain parts

Werner Engelmaier <[log in to unmask]>

Tue, 10 Sep 2002 17:05:21 EDT

35 lines

New Thread

ReParylene

ReParylene

[log in to unmask]

Mon, 30 Sep 2002 18:37:28 EDT

40 lines

New Thread

request of formula of calculation of impedance after the rmal shock

Re: request of formula of calculation of impedance after the rmal shock

Bresnan, Thomas <[log in to unmask]>

Mon, 16 Sep 2002 13:44:05 -0700

63 lines

New Thread

request of formula of calculation of impedance after thermal shock

request of formula of calculation of impedance after thermal shock

Jack Low <[log in to unmask]>

Mon, 16 Sep 2002 12:50:45 +0800

32 lines

Re: request of formula of calculation of impedance after thermal shock

Tim Reeves <[log in to unmask]>

Mon, 16 Sep 2002 11:38:50 -0700

66 lines

Re: request of formula of calculation of impedance after thermal shock

Don Vischulis <[log in to unmask]>

Mon, 16 Sep 2002 14:18:28 -0500

69 lines

Re: request of formula of calculation of impedance after thermal shock

joyce <[log in to unmask]>

Mon, 16 Sep 2002 17:17:56 -0400

90 lines

New Thread

Reverse Engineering

Reverse Engineering

McGlaughlin, Jeffrey A <[log in to unmask]>

Tue, 10 Sep 2002 14:48:08 -0400

31 lines

Re: Reverse Engineering

Martyn Gaudion <[log in to unmask]>

Tue, 10 Sep 2002 21:41:36 +0100

65 lines

Re: Reverse Engineering

Ray Klein <[log in to unmask]>

Tue, 10 Sep 2002 14:03:05 -0700

65 lines

Re: Reverse Engineering

Jason <[log in to unmask]>

Tue, 10 Sep 2002 17:31:22 -0500

23 lines

Reverse Engineering

Jack C. Olson <[log in to unmask]>

Tue, 10 Sep 2002 21:06:19 -0500

44 lines

New Thread

RF cables

RF cables

Ted Tontis, C.I.D. <[log in to unmask]>

Thu, 12 Sep 2002 13:02:36 -0500

45 lines

Re: RF cables

Crepeau, Phil <[log in to unmask]>

Thu, 12 Sep 2002 11:53:06 -0700

86 lines

Re: RF cables

Randy Bock Sr. <[log in to unmask]>

Thu, 12 Sep 2002 16:21:00 -0400

100 lines

New Thread

RF35P desmear with permanganate

RF35P desmear with permanganate

Nico Hesselink <[log in to unmask]>

Thu, 26 Sep 2002 04:44:11 -0500

22 lines

New Thread

rigid flex

rigid flex

Zweigart, Siegmund <[log in to unmask]>

Fri, 20 Sep 2002 09:02:55 +0200

53 lines

Re: rigid flex

John Boocock <[log in to unmask]>

Fri, 20 Sep 2002 12:16:00 +0100

108 lines

Re: rigid flex

ken Giery <[log in to unmask]>

Fri, 20 Sep 2002 08:18:11 -0400

82 lines

Re: rigid flex

Eric Christison <[log in to unmask]>

Fri, 20 Sep 2002 13:19:57 +0100

60 lines

New Thread

Rigid Flex Supplier

Rigid Flex Supplier

Croslin, Robert <[log in to unmask]>

Mon, 30 Sep 2002 10:56:27 -0400

32 lines

Re: Rigid Flex Supplier

Randy Bock Sr. <[log in to unmask]>

Mon, 30 Sep 2002 12:47:23 -0400

67 lines

New Thread

Rod Smith/Endicott/IBM is out of the office.

Rod Smith/Endicott/IBM is out of the office.

Rod Smith <[log in to unmask]>

Thu, 26 Sep 2002 16:27:41 -0400

24 lines

New Thread

Silver Through hole PCBs

Silver Through hole PCBs

Atkinson, Neil <[log in to unmask]>

Mon, 23 Sep 2002 08:56:39 +0100

41 lines

New Thread

SIR Testing issue

SIR Testing issue

Graham Naisbitt <[log in to unmask]>

Tue, 10 Sep 2002 13:52:54 +0100

66 lines

Re: SIR Testing issue

Mike Fenner <[log in to unmask]>

Tue, 10 Sep 2002 14:28:06 +0100

108 lines

Re: SIR Testing issue

Bev Christian <[log in to unmask]>

Tue, 10 Sep 2002 09:25:34 -0400

95 lines

Re: SIR Testing issue

Don Vischulis <[log in to unmask]>

Tue, 10 Sep 2002 09:40:02 -0500

104 lines

Re: SIR Testing issue

Earl Moon <[log in to unmask]>

Tue, 10 Sep 2002 11:58:02 -0600

143 lines

Re: SIR Testing issue

[log in to unmask]

Wed, 11 Sep 2002 10:35:31 -0500

136 lines

New Thread

SMD packages

SMD packages

Karnwal, Pankaj <[log in to unmask]>

Thu, 26 Sep 2002 12:22:23 +0200

46 lines

Re: SMD packages

Steve Owen <[log in to unmask]>

Thu, 26 Sep 2002 13:36:18 +0100

243 lines

Re: SMD packages

Steve Gregory <[log in to unmask]>

Thu, 26 Sep 2002 09:26:10 EDT

88 lines

Re: SMD packages

Debbie Goodwin <[log in to unmask]>

Thu, 26 Sep 2002 07:13:55 -0700

100 lines

New Thread

SMT Magazine

Re: SMT Magazine

Werner Engelmaier <[log in to unmask]>

Tue, 3 Sep 2002 23:46:17 EDT

26 lines

New Thread

solder beads

solder beads

Dan R. Johnson <[log in to unmask]>

Wed, 18 Sep 2002 16:18:44 -0700

73 lines

Re: solder beads

Chris Christian <[log in to unmask]>

Thu, 19 Sep 2002 08:39:31 -0400

162 lines

New Thread

Solder mask vacuum laminators

Solder mask vacuum laminators

Steve kelly <[log in to unmask]>

Fri, 6 Sep 2002 12:39:23 -0400

174 lines

Re: Solder mask vacuum laminators

Sean Hill <[log in to unmask]>

Fri, 6 Sep 2002 10:48:57 -0700

212 lines

New Thread

solder paste below Type 5

solder paste below Type 5

sahmad <[log in to unmask]>

Thu, 12 Sep 2002 16:30:08 -0600

27 lines

Re: solder paste below Type 5

[log in to unmask]

Fri, 13 Sep 2002 07:41:45 +0800

70 lines

New Thread

Solder paste ProFlow issue

Solder paste ProFlow issue

Higgins Leo <[log in to unmask]>

Fri, 27 Sep 2002 02:33:47 -0400

287 lines

Re: Solder paste ProFlow issue

Henry Rekers <[log in to unmask]>

Fri, 27 Sep 2002 07:58:49 -0700

267 lines

Re: Solder paste ProFlow issue

Duane Shreve <[log in to unmask]>

Fri, 27 Sep 2002 14:05:11 -0600

397 lines

New Thread

Solder paste viscosity testing

Solder paste viscosity testing

Tobias.Chang <[log in to unmask]>

Wed, 25 Sep 2002 16:29:19 -0400

63 lines

New Thread

Solderability Testing

Re: Solderability Testing

Dan R. Johnson <[log in to unmask]>

Tue, 3 Sep 2002 09:06:37 -0700

31 lines

New Thread

source for board racks

source for board racks

Brian Toleno <[log in to unmask]>

Wed, 4 Sep 2002 14:31:04 -0700

62 lines

Re: source for board racks

Randy Bock Sr. <[log in to unmask]>

Thu, 5 Sep 2002 08:49:06 -0400

147 lines

New Thread

Specs

Specs

Randy Bock Sr. <[log in to unmask]>

Thu, 5 Sep 2002 15:42:42 -0400

76 lines

Re: Specs

Guy Ramsey <[log in to unmask]>

Fri, 6 Sep 2002 12:06:38 -0400

164 lines

New Thread

Spring clamp

Spring clamp

Gary Camac <[log in to unmask]>

Tue, 3 Sep 2002 13:52:35 -0500

31 lines

Re: Spring clamp

Dan R. Johnson <[log in to unmask]>

Tue, 3 Sep 2002 13:27:37 -0700

26 lines

Re: Spring clamp

Thorup, John <[log in to unmask]>

Tue, 3 Sep 2002 13:17:28 -0700

61 lines

Re: Spring clamp

Genny Gibbard <[log in to unmask]>

Tue, 3 Sep 2002 14:46:46 -0600

43 lines

Re: Spring clamp

Rudy Sedlak <[log in to unmask]>

Tue, 3 Sep 2002 17:46:58 EDT

33 lines

New Thread

Strip-able conformal coating experiences

Strip-able conformal coating experiences

Gregg Klawson <[log in to unmask]>

Tue, 17 Sep 2002 15:01:40 -0400

34 lines

Re: Strip-able conformal coating experiences

David Douthit <[log in to unmask]>

Tue, 17 Sep 2002 17:13:38 -0700

67 lines

Re: Strip-able conformal coating experiences

[log in to unmask]

Wed, 18 Sep 2002 14:13:49 +0800

98 lines

Re: Strip-able conformal coating experiences

joyce <[log in to unmask]>

Wed, 18 Sep 2002 07:41:14 -0400

63 lines

Re: Strip-able conformal coating experiences

Charles Caswell <[log in to unmask]>

Wed, 18 Sep 2002 07:09:09 -0500

69 lines

Re: Strip-able conformal coating experiences

Gregg Klawson <[log in to unmask]>

Wed, 18 Sep 2002 09:31:14 -0400

153 lines

Re: Strip-able conformal coating experiences

Graham Naisbitt <[log in to unmask]>

Wed, 18 Sep 2002 16:54:19 +0100

79 lines

Re: Strip-able conformal coating experiences

David Douthit <[log in to unmask]>

Wed, 18 Sep 2002 16:24:27 -0700

105 lines

Re: Strip-able conformal coating experiences

joyce <[log in to unmask]>

Thu, 19 Sep 2002 07:53:40 -0400

148 lines

New Thread

stripping brass

stripping brass

Dan R. Johnson <[log in to unmask]>

Wed, 25 Sep 2002 11:50:51 -0700

79 lines

Re: stripping brass

Charles Caswell <[log in to unmask]>

Wed, 25 Sep 2002 15:47:03 -0500

150 lines

Re: stripping brass

[log in to unmask]

Wed, 25 Sep 2002 17:22:28 EDT

25 lines

Re: stripping brass

Barmuta, Mike <[log in to unmask]>

Wed, 25 Sep 2002 15:26:41 -0700

85 lines

Re: stripping brass

Rudy Sedlak <[log in to unmask]>

Wed, 25 Sep 2002 19:04:13 EDT

30 lines

Re: stripping brass

Dan R. Johnson <[log in to unmask]>

Wed, 25 Sep 2002 17:04:26 -0700

76 lines

Re: stripping brass

Rudy Sedlak <[log in to unmask]>

Wed, 25 Sep 2002 22:59:47 EDT

78 lines

Re: stripping brass

Bev Christian <[log in to unmask]>

Thu, 26 Sep 2002 08:40:17 -0400

147 lines

Re: stripping brass

Charles Caswell <[log in to unmask]>

Thu, 26 Sep 2002 09:52:37 -0500

240 lines

Re: stripping brass

Atkinson, Neil <[log in to unmask]>

Fri, 27 Sep 2002 13:42:05 +0100

383 lines

New Thread

Taped SMD Parts Counters

Taped SMD Parts Counters

Anderson, Greg (IndSys, GEFanuc, NA) <[log in to unmask]>

Thu, 19 Sep 2002 08:42:47 -0400

30 lines

Re: Taped SMD Parts Counters

Dave Chapman <[log in to unmask]>

Mon, 23 Sep 2002 09:49:05 -0500

61 lines

New Thread

TechNet Listserver...

Re: TechNet Listserver...

Steve Gregory <[log in to unmask]>

Sun, 8 Sep 2002 22:18:33 EDT

84 lines

New Thread

Temp and RH Data Loggers

Temp and RH Data Loggers

Morse, Carrie <[log in to unmask]>

Wed, 18 Sep 2002 08:23:39 -0400

43 lines

New Thread

Test Boards

Test Boards

Carroll, George <[log in to unmask]>

Tue, 24 Sep 2002 17:15:49 -0400

30 lines

Re: Test Boards

Jane Koh <[log in to unmask]>

Wed, 25 Sep 2002 09:25:45 +0800

64 lines

Re: Test Boards

[log in to unmask]

Wed, 25 Sep 2002 09:40:02 EDT

22 lines

New Thread

THE BOOK YOU ALL ORDERED, OR NOT

THE BOOK YOU ALL ORDERED, OR NOT

Earl Moon <[log in to unmask]>

Wed, 11 Sep 2002 03:12:26 -0500

40 lines

New Thread

Theramal Fatigue Resistant Solder

Theramal Fatigue Resistant Solder

Phillip Hinton <[log in to unmask]>

Tue, 17 Sep 2002 22:55:02 EDT

57 lines

Re: Theramal Fatigue Resistant Solder

[log in to unmask]

Wed, 18 Sep 2002 18:52:49 +0800

85 lines

Re: Theramal Fatigue Resistant Solder

Crepeau, Phil <[log in to unmask]>

Wed, 18 Sep 2002 10:11:54 -0700

144 lines

Re: Theramal Fatigue Resistant Solder

Roger Bilham <[log in to unmask]>

Thu, 19 Sep 2002 08:12:18 +0100

127 lines

New Thread

Thermal stress question - vias

Re: Thermal stress question - vias

Werner Engelmaier <[log in to unmask]>

Thu, 5 Sep 2002 14:40:48 EDT

32 lines

New Thread

TONS of emails with attachments...

TONS of emails with attachments...

Steve Gregory <[log in to unmask]>

Mon, 2 Sep 2002 10:22:25 EDT

104 lines

Re: TONS of emails with attachments...

b_ellis <[log in to unmask]>

Mon, 2 Sep 2002 18:37:51 +0300

79 lines

Re: TONS of emails with attachments...

[log in to unmask]

Mon, 2 Sep 2002 11:39:13 EDT

46 lines

Re: TONS of emails with attachments...

Eric Dawson <[log in to unmask]>

Tue, 3 Sep 2002 07:40:52 +0100

79 lines

Re: TONS of emails with attachments...

Genny Gibbard <[log in to unmask]>

Tue, 3 Sep 2002 08:09:20 -0600

124 lines

New Thread

Torque Inspections

Torque Inspections

Kathy Kuhlow <[log in to unmask]>

Thu, 5 Sep 2002 12:03:21 -0500

68 lines

Re: Torque Inspections

Steve Thomas <[log in to unmask]>

Thu, 5 Sep 2002 10:40:08 -0700

63 lines

Re: Torque Inspections

Earl Moon <[log in to unmask]>

Thu, 5 Sep 2002 12:02:44 -0600

56 lines

Re: Torque Inspections

Earl Moon <[log in to unmask]>

Thu, 5 Sep 2002 12:52:14 -0600

88 lines

Re: Torque Inspections

Randy Bock Sr. <[log in to unmask]>

Thu, 5 Sep 2002 15:00:47 -0400

68 lines

Re: Torque Inspections

Steve Thomas <[log in to unmask]>

Thu, 5 Sep 2002 13:10:03 -0700

59 lines

Re: Torque Inspections

[log in to unmask]

Mon, 9 Sep 2002 08:08:56 +0800

94 lines

Re: Torque Inspections

[log in to unmask]

Mon, 9 Sep 2002 08:15:59 +0800

107 lines

Re: Torque Inspections

Thanongsak W <[log in to unmask]>

Mon, 9 Sep 2002 08:18:01 +0700

24 lines

Re: Torque Inspections

Blomberg, Rainer (FL51) <[log in to unmask]>

Tue, 10 Sep 2002 10:05:24 -0400

84 lines

New Thread

Trying to contact, NTC

Trying to contact, NTC

Eric Dawson <[log in to unmask]>

Mon, 16 Sep 2002 10:59:01 +0100

29 lines

New Thread

TSSOP to SOIC Adapter for 8-pin devices

TSSOP to SOIC Adapter for 8-pin devices

Houston, Terri <[log in to unmask]>

Mon, 30 Sep 2002 11:39:39 -0500

33 lines

Re: TSSOP to SOIC Adapter for 8-pin devices

Adair, Bret <[log in to unmask]>

Mon, 30 Sep 2002 10:11:02 -0700

200 lines

Re: TSSOP to SOIC Adapter for 8-pin devices

Steve Gregory <[log in to unmask]>

Mon, 30 Sep 2002 13:50:06 EDT

99 lines

Re: TSSOP to SOIC Adapter for 8-pin devices

Bill Wesmoreland <[log in to unmask]>

Mon, 30 Sep 2002 13:54:09 -0500

82 lines

New Thread

unplated copper nickel alloy

unplated copper nickel alloy

Bev Christian <[log in to unmask]>

Thu, 26 Sep 2002 11:52:22 -0400

97 lines

Re: unplated copper nickel alloy

Crepeau, Phil <[log in to unmask]>

Thu, 26 Sep 2002 09:58:48 -0700

179 lines

Re: unplated copper nickel alloy

Crepeau, Phil <[log in to unmask]>

Thu, 26 Sep 2002 10:10:23 -0700

188 lines

Re: unplated copper nickel alloy

Wenger, George M. <[log in to unmask]>

Thu, 26 Sep 2002 13:48:13 -0500

201 lines

Re: unplated copper nickel alloy

Dan R. Johnson <[log in to unmask]>

Thu, 26 Sep 2002 12:23:30 -0700

111 lines

Re: unplated copper nickel alloy

Steve kelly <[log in to unmask]>

Thu, 26 Sep 2002 17:02:36 -0400

26 lines

New Thread

Varnished leads.

Varnished leads.

Henry Rekers <[log in to unmask]>

Wed, 4 Sep 2002 16:10:24 -0700

25 lines

Re: Varnished leads.

Peter Barton <[log in to unmask]>

Thu, 5 Sep 2002 09:59:00 +0100

48 lines

Re: Varnished leads.

Phil Nutting <[log in to unmask]>

Thu, 5 Sep 2002 09:36:35 -0400

67 lines

New Thread

Via Reliability Study

Via Reliability Study

Mirka Halas <[log in to unmask]>

Mon, 9 Sep 2002 16:06:45 -0500

26 lines

Re: Via Reliability Study

Werner Engelmaier <[log in to unmask]>

Mon, 9 Sep 2002 22:52:49 EDT

31 lines

Re: Via Reliability Study

Halas, Mirka <[log in to unmask]>

Tue, 10 Sep 2002 08:31:46 -0400

73 lines

New Thread

Viscosity vs Temperature.

Viscosity vs Temperature.

Henry Rekers <[log in to unmask]>

Wed, 25 Sep 2002 15:45:07 -0700

43 lines

Re: Viscosity vs Temperature.

Steve Gregory <[log in to unmask]>

Wed, 25 Sep 2002 20:02:09 EDT

128 lines

Re: Viscosity vs Temperature.

Henry Rekers <[log in to unmask]>

Wed, 25 Sep 2002 18:13:33 -0700

179 lines

Re: Viscosity vs Temperature.

Jowan Iven <[log in to unmask]>

Thu, 26 Sep 2002 07:26:21 +0200

97 lines

Re: Viscosity vs Temperature.

Marsico, James <[log in to unmask]>

Thu, 26 Sep 2002 07:24:01 -0400

74 lines

Re: Viscosity vs Temperature.

Bev Christian <[log in to unmask]>

Thu, 26 Sep 2002 08:44:43 -0400

107 lines

Re: Viscosity vs Temperature.

Steve Gregory <[log in to unmask]>

Thu, 26 Sep 2002 08:49:09 EDT

79 lines

Re: Viscosity vs Temperature.

Henry Rekers <[log in to unmask]>

Thu, 26 Sep 2002 12:29:14 -0700

115 lines

Re: Viscosity vs Temperature.

Chris Murphy <[log in to unmask]>

Fri, 27 Sep 2002 09:01:15 +1200

38 lines

New Thread

Wave Optimizer

Wave Optimizer

Morse, Carrie <[log in to unmask]>

Fri, 27 Sep 2002 10:44:42 -0400

27 lines

Re: Wave Optimizer

[log in to unmask]

Fri, 27 Sep 2002 14:45:44 -0400

75 lines

Re: Wave Optimizer

Guy Ramsey <[log in to unmask]>

Fri, 27 Sep 2002 14:58:56 -0400

81 lines

New Thread

Wave solder bath analysis

Wave solder bath analysis

McCall,Doug <[log in to unmask]>

Mon, 23 Sep 2002 11:16:09 +0100

56 lines

Re: Wave solder bath analysis

Peter Swanson <[log in to unmask]>

Mon, 23 Sep 2002 13:23:54 +0100

101 lines

Re: Wave solder bath analysis

Gary Camac <[log in to unmask]>

Mon, 23 Sep 2002 08:24:37 -0500

86 lines

Re: Wave solder bath analysis

[log in to unmask]

Mon, 23 Sep 2002 07:45:02 -0600

78 lines

Re: Wave solder bath analysis

Lee Whiteman <[log in to unmask]>

Mon, 23 Sep 2002 11:13:13 -0400

108 lines

New Thread

Wave soldering pallet thickness

Wave soldering pallet thickness

Peter Lee <[log in to unmask]>

Mon, 30 Sep 2002 13:14:44 -0700

274 lines

Re: Wave soldering pallet thickness

jim <[log in to unmask]>

Mon, 30 Sep 2002 16:43:11 -0500

362 lines

Re: Wave soldering pallet thickness

Morse, Carrie <[log in to unmask]>

Mon, 30 Sep 2002 18:41:42 -0400

344 lines

New Thread

White Wire Reliability

White Wire Reliability

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Tue, 3 Sep 2002 13:59:25 -0400

42 lines

New Thread

Why I had to empty my solder pot...

Why I had to empty my solder pot...

Steve Gregory <[log in to unmask]>

Thu, 5 Sep 2002 20:57:53 EDT

64 lines

Re: Why I had to empty my solder pot...

David Fish <[log in to unmask]>

Fri, 6 Sep 2002 08:23:22 -0700

142 lines

New Thread

XY data

XY data

Efendy Wijaya <[log in to unmask]>

Thu, 5 Sep 2002 15:30:25 -0700

27 lines

Re: XY data

Earl Moon <[log in to unmask]>

Thu, 5 Sep 2002 18:25:16 -0500

29 lines

Re: XY data

Steve Gregory <[log in to unmask]>

Thu, 5 Sep 2002 22:37:22 EDT

83 lines

Re: XY data

SDC's Tech Net <[log in to unmask]>

Thu, 5 Sep 2002 19:23:48 -0700

63 lines

Re: XY data

Jack C. Olson <[log in to unmask]>

Fri, 6 Sep 2002 09:05:31 -0500

45 lines

Re: XY data

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 09:09:46 -0500

24 lines

Re: XY data

rgrant <[log in to unmask]>

Fri, 6 Sep 2002 08:36:55 -0600

54 lines

Re: XY data

Jack C. Olson <[log in to unmask]>

Fri, 6 Sep 2002 09:46:41 -0500

69 lines

Re: XY data

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 10:19:39 -0500

29 lines

Re: XY data

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 10:21:29 -0500

29 lines

Re: XY data

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 10:23:59 -0500

41 lines

Re: XY data

[log in to unmask]

Fri, 6 Sep 2002 11:43:52 EDT

26 lines

Re: XY data

rgrant <[log in to unmask]>

Fri, 6 Sep 2002 10:10:57 -0600

48 lines

Re: XY data

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 11:10:31 -0500

30 lines

Re: XY data

Randy Bock Sr. <[log in to unmask]>

Fri, 6 Sep 2002 14:10:53 -0400

63 lines

Re: XY data

Earl Moon <[log in to unmask]>

Fri, 6 Sep 2002 13:21:19 -0500

20 lines

Re: XY data

Daan Terstegge <[log in to unmask]>

Fri, 6 Sep 2002 21:29:22 +0200

161 lines

Re: XY data

[log in to unmask]

Mon, 9 Sep 2002 08:50:36 +0800

98 lines

Re: XY data

Efendy Wijaya <[log in to unmask]>

Mon, 9 Sep 2002 16:43:40 -0700

125 lines

Re: XY data

Smith, Richard <[log in to unmask]>

Wed, 11 Sep 2002 14:27:36 -0400

81 lines

New Thread

Zinc casting and solderability

Re: Zinc casting and solderability

joyce <[log in to unmask]>

Tue, 3 Sep 2002 08:14:32 -0400

143 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager