LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


May 2002


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

(Fwd) Inquiry on maximum temperature (3 messages)
0201 inspection and rework tools (1 message)
0402 pad design (1 message)
63/37 solder paste with silver plated boards (6 messages)
<No subject> (1 message)
A "NEDA" Oriented label... (1 message)
abrasive for cleaning PCB surfaces (2 messages)
AM79C970AVIW Ethernet Controller IC (1 message)
Anti-voiding solder paste (6 messages)
Antwort: [TN] BGA X-ray Cross Section services - Vendors? (1 message)
assembly spacing (3 messages)
ASSY: Component Polarity (11 messages)
ASSY: Component Polarity - part 2 (1 message)
ASSY: Reflow for Through-Hole Devices (8 messages)
bare board serialization (4 messages)
BGA replacement (17 messages)
BGA SMD vs NSMD (2 messages)
BGA solder anomalies (3 messages)
BGA Solderability (13 messages)
BGA warpage - defects in the corners. (7 messages)
BGA X-ray Cross Section services - Vendors? (7 messages)
BGA's on ruggedized assemblies... (10 messages)
Board analysis (2 messages)
board baking (2 messages)
Board Cost (2 messages)
Board defect? Purple spot (5 messages)
BOARD EDGE CLEARANCE (2 messages)
Cell phone antenna enhancers... (6 messages)
Cell phone antenna enhancers...NTC (41 messages)
Cell phone antenna enhances...NTC (10 messages)
Ceramic filled Teflon board (5 messages)
Class 3 Solder Fillets - SMT 25 mil square pin Headers? (5 messages)
Cleaning of No-clean Assemblies (14 messages)
CLEARANCE FRON PWB EDGES (2 messages)
Coating thickness (5 messages)
conductive blind via plug (9 messages)
Conformal Coating (22 messages)
Conformal coating / gluing (7 messages)
Conformal coating BGAs (11 messages)
Crimp Tools (2 messages)
Crimped connections (15 messages)
Cycle Time for Solder Paste Printing (2 messages)
D.O.E (12 messages)
D2PAK devices (4 messages)
Danny Harkins/CSI is out of the office. (1 message)
Dielectric constant for cores and prepeg (1 message)
Dielectric Constants For Core and Prepreg (5 messages)
Dielectric material vs. Solder mask (1 message)
DPMO benchmarking (1 message)
dross disposal (5 messages)
Econonic Boom (1 message)
Electrical Isolation in dbm ? (2 messages)
Electronics Manufacturers Association Meeting (Seattle) (1 message)
ESD and equipment isolation (5 messages)
Eutectic solder paste on silver plated boards (2 messages)
ExposedCu (2 messages)
Film Capacitors...geeze! (6 messages)
Fire Up for IPC Annual Meeting 2002 (3 messages)
First Article Inspection of bare boards (4 messages)
Flip-flop panels (2 messages)
Flux on top of PCBs from wave (4 messages)
fLUX RESIDUE IN NO CLEAN SOLDER WIRE (3 messages)
For Francois in case this didn't get posted to the technet (2 messages)
FPBGA Area Ratio Question (8 messages)
Gold Reclaim (1 message)
good to be back (1 message)
Guidelines or standards for number of missing unused BGA pads allowed (4 messages)
HDI and Sanmina (12 messages)
High lead composition solder paste and rinse water. (9 messages)
high Tg FR4 (1 message)
High Voltage tracking on pbc surface (12 messages)
hole plating peel test (1 message)
Hole routing in PCBs (7 messages)
HTML 3.2 (1 message)
Interesting addition to an ealier discussion (1 message)
IPC-4552 spec for ENIG (2 messages)
IPC-DC Boston area mtg, 21-May (1 message)
Keeping RA and OA flux separate (4 messages)
Locating Jay Brusse (2 messages)
Looking for a capacitance meter (6 messages)
Looking for A Solderability Spec (6 messages)
Looking for A Solderability Spec - No technical content contained (5 messages)
Looking for place who offer classes on ICT/DFT in Bay Area (1 message)
Looking for recent PCB Reliability model (3 messages)
Low Temp BGA Balls (4 messages)
Mark Orlowski/PEMSTAR Inc is out of the office. (1 message)
Mechanical Strength of Solder Joints (1 message)
Metal core PCB's (6 messages)
Mil spec approval (6 messages)
no clean paste for High frequencies (3 messages)
No Clean? (1 message)
NTC - The Gregory's are a team now... (10 messages)
OT Cell phone antenna enhances...NTC (2 messages)
OT- wasn't an experiment.. (3 messages)
Palladium Leads (11 messages)
Palladium Leads - Flux Choices (1 message)
Panelization sanity check needed (6 messages)
Parts List Definition (4 messages)
pcb design (5 messages)
PCB MATERIAL with low OUTGASSING Characteristics.... (1 message)
PCB materials (9 messages)
Plant closures (3 messages)
power traces (1 message)
Productivity Way Up (17 messages)
Productivity Way Up - Off topic (3 messages)
Proposed lifting of component date code restrictions (2 messages)
PTH Vertical Fill Requirement IPC610 Rev. C (8 messages)
Re column grid arrays (2 messages)
Re Hole Fill (2 messages)
ReA610HoleFill (4 messages)
really big boards (15 messages)
really big boards - all humor, no tech value (4 messages)
Recommended solder paste for a 6 layer double-sided board with CSP & BGA packages (1 message)
Reflow Oven Recommendations (2 messages)
Repair/Mod pads (5 messages)
RePalladium Leads (2 messages)
Restoring solderability (6 messages)
resume post (1 message)
Rod Smith/Endicott/IBM is out of the office. (1 message)
safety committee (4 messages)
Sanmina HDI (1 message)
Sanminaized (1 message)
Shear stress on laser vias (1 message)
Side fillet requirements (9 messages)
Solder after reflow on Gold Immersion finish (3 messages)
Solder Defect Rates (1 message)
Solder-UBM Separation (3 messages)
soldermask ring v. full coat for BGA design (5 messages)
Some Advice on PCB tols required (2 messages)
Surrogate Post - Multiple Choice Question (1 message)
SV: [TN] Recommended solder paste for a 6 layer double-sided board with CSP & BGA packages (1 message)
SV: [TN] Vapor phase (6 messages)
Tape & Reel Size for 0402 Components (2 messages)
TechNet Cops are NOT on vacation (1 message)
TechNet Digest - 12 May 2002 to 13 May 2002 (#2002-109) (2 messages)
testing via holes (4 messages)
Texas Designer's Learning Symposium - May 20 - 25, 2002 (1 message)
The Best Opportunity in Texas!!! (1 message)
Thickness of finish (1 message)
Tinning SMD diodes (3 messages)
TM650 (2 messages)
Trough hole soldering (2 messages)
TypeUR conformal coatings (3 messages)
V-groove 031 thick PCB (1 message)
Vacuum ??? (1 message)
vacuum seal and MSD (4 messages)
Vacuum Sealing (2 messages)
Vacuum sealing equipment (3 messages)
Vacuum sealing equipment... (11 messages)
Vapor phase (14 messages)
Via Capacitance (2 messages)
Via Plug (1 message)
Vias-in-pads (4 messages)
VIRUS WARNNING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (2 messages)
Voids in BGA/CSP Balls (1 message)
Voids in fine-pitch BGAs after reflow (3 messages)
Voids on 0.75 mm micro-BGA (2 messages)
Wave solder re-runs/re-work (5 messages)
Wave solder re-runs/re-work exposed copper (5 messages)
[TN} Vacuum Sealing... (2 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

Randy Bock Sr. <[log in to unmask]>

Wed, 29 May 2002 15:47:36 -0400

119 lines

Re:

Mel Parrish <[log in to unmask]>

Wed, 29 May 2002 15:15:20 -0500

146 lines

Re:

[log in to unmask]

Thu, 30 May 2002 08:39:17 +0800

101 lines

New Thread

(Fwd) Inquiry on maximum temperature

(Fwd) Inquiry on maximum temperature

Rick <[log in to unmask]>

Tue, 21 May 2002 07:24:55 -0400

46 lines

Re: (Fwd) Inquiry on maximum temperature

Crepeau, Phil <[log in to unmask]>

Wed, 22 May 2002 08:02:50 -0700

78 lines

Re: (Fwd) Inquiry on maximum temperature

Mark Roslawski <[log in to unmask]>

Wed, 22 May 2002 17:21:52 -0700

104 lines

New Thread

0201 inspection and rework tools

0201 inspection and rework tools

Yu, Rudolph <[log in to unmask]>

Fri, 31 May 2002 15:12:14 -0700

28 lines

New Thread

0402 pad design

0402 pad design

Edward S. Wheeler <[log in to unmask]>

Thu, 16 May 2002 08:32:00 -0400

29 lines

New Thread

63/37 solder paste with silver plated boards

63/37 solder paste with silver plated boards

Vandendolder, Ron <[log in to unmask]>

Thu, 9 May 2002 13:26:38 -0400

32 lines

Re: 63/37 solder paste with silver plated boards

Earl Moon <[log in to unmask]>

Thu, 9 May 2002 12:42:22 -0500

27 lines

Re: 63/37 solder paste with silver plated boards

Earl Moon <[log in to unmask]>

Thu, 9 May 2002 12:43:38 -0500

23 lines

Re: 63/37 solder paste with silver plated boards

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Thu, 9 May 2002 13:59:29 -0400

72 lines

Re: 63/37 solder paste with silver plated boards

Alex Krstic <[log in to unmask]>

Thu, 9 May 2002 13:15:49 -0600

60 lines

Re: 63/37 solder paste with silver plated boards

Mike Fenner <[log in to unmask]>

Mon, 13 May 2002 10:49:53 +0100

77 lines

New Thread

<No subject>

<No subject>

Dieselberg, Ron <[log in to unmask]>

Wed, 29 May 2002 13:56:47 -0400

83 lines

New Thread

A "NEDA" Oriented label...

Re: A "NEDA" Oriented label...

Guy Ramsey <[log in to unmask]>

Wed, 1 May 2002 07:05:35 -0400

56 lines

New Thread

abrasive for cleaning PCB surfaces

abrasive for cleaning PCB surfaces

Kris Keating <[log in to unmask]>

Thu, 23 May 2002 13:23:00 -0400

32 lines

Re: abrasive for cleaning PCB surfaces

Phil Nutting <[log in to unmask]>

Thu, 23 May 2002 13:57:10 -0400

73 lines

New Thread

AM79C970AVIW Ethernet Controller IC

AM79C970AVIW Ethernet Controller IC

[log in to unmask]

Wed, 22 May 2002 13:22:43 +0800

39 lines

New Thread

Anti-voiding solder paste

Anti-voiding solder paste

d. terstegge <[log in to unmask]>

Tue, 28 May 2002 12:37:24 +0200

40 lines

Re: Anti-voiding solder paste

Eric Dawson <[log in to unmask]>

Tue, 28 May 2002 13:33:55 +0100

55 lines

Re: Anti-voiding solder paste

Earl Moon <[log in to unmask]>

Tue, 28 May 2002 07:35:14 -0500

33 lines

Re: Anti-voiding solder paste

[log in to unmask]

Tue, 28 May 2002 08:56:26 EDT

53 lines

Re: Anti-voiding solder paste

rgrant <[log in to unmask]>

Tue, 28 May 2002 09:10:22 -0600

121 lines

Re: Anti-voiding solder paste

Sherif Refaat <[log in to unmask]>

Wed, 29 May 2002 12:57:00 -0400

94 lines

New Thread

Antwort: [TN] BGA X-ray Cross Section services - Vendors?

Antwort: [TN] BGA X-ray Cross Section services - Vendors?

Frank Kriesch <[log in to unmask]>

Fri, 17 May 2002 09:19:57 +0200

126 lines

New Thread

assembly spacing

assembly spacing

[log in to unmask]

Mon, 20 May 2002 17:36:02 EDT

32 lines

Re: assembly spacing

Barry Gallegos <[log in to unmask]>

Tue, 21 May 2002 06:58:48 -0600

68 lines

Re: assembly spacing

Guy Ramsey <[log in to unmask]>

Tue, 21 May 2002 09:49:18 -0400

69 lines

New Thread

ASSY: Component Polarity

ASSY: Component Polarity

Jack C. Olson <[log in to unmask]>

Thu, 30 May 2002 08:35:45 -0500

38 lines

Re: ASSY: Component Polarity

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 08:42:19 -0500

38 lines

Re: ASSY: Component Polarity

Mark Charlton <[log in to unmask]>

Thu, 30 May 2002 10:03:10 -0400

78 lines

Re: ASSY: Component Polarity

Phil Nutting <[log in to unmask]>

Thu, 30 May 2002 10:31:23 -0400

77 lines

Re: ASSY: Component Polarity

[log in to unmask]

Thu, 30 May 2002 11:18:49 EDT

64 lines

Re: ASSY: Component Polarity

Jack C. Olson <[log in to unmask]>

Thu, 30 May 2002 21:30:18 -0500

68 lines

Re: ASSY: Component Polarity

[log in to unmask]

Thu, 30 May 2002 23:27:16 EDT

86 lines

Re: ASSY: Component Polarity

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 23:52:33 -0500

55 lines

Re: ASSY: Component Polarity

Phil Nutting <[log in to unmask]>

Fri, 31 May 2002 08:30:30 -0400

104 lines

Re: ASSY: Component Polarity

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 07:57:24 -0500

33 lines

Re: ASSY: Component Polarity

rgrant <[log in to unmask]>

Fri, 31 May 2002 08:18:59 -0600

126 lines

New Thread

ASSY: Component Polarity - part 2

Re: ASSY: Component Polarity - part 2

Phil Nutting <[log in to unmask]>

Thu, 30 May 2002 10:46:47 -0400

75 lines

New Thread

ASSY: Reflow for Through-Hole Devices

ASSY: Reflow for Through-Hole Devices

Jack C. Olson <[log in to unmask]>

Wed, 22 May 2002 10:59:26 -0500

31 lines

Re: ASSY: Reflow for Through-Hole Devices

Woody, Linda L <[log in to unmask]>

Wed, 22 May 2002 15:51:48 -0400

68 lines

Re: ASSY: Reflow for Through-Hole Devices

Lee Whiteman <[log in to unmask]>

Wed, 22 May 2002 16:20:51 -0400

78 lines

Re: ASSY: Reflow for Through-Hole Devices

Ed Valentine <[log in to unmask]>

Wed, 22 May 2002 18:11:25 -0400

67 lines

Re: ASSY: Reflow for Through-Hole Devices

[log in to unmask]

Wed, 22 May 2002 18:32:49 EDT

85 lines

Re: ASSY: Reflow for Through-Hole Devices

[log in to unmask]

Thu, 23 May 2002 08:50:20 EDT

38 lines

Re: ASSY: Reflow for Through-Hole Devices

Atkinson, Neil <[log in to unmask]>

Fri, 24 May 2002 08:15:25 +0100

303 lines

Re: ASSY: Reflow for Through-Hole Devices

Mike Fenner <[log in to unmask]>

Tue, 28 May 2002 09:05:38 +0100

355 lines

New Thread

bare board serialization

bare board serialization

Mark Hargreaves <[log in to unmask]>

Wed, 29 May 2002 16:26:09 -0400

26 lines

Re: bare board serialization

[log in to unmask]

Thu, 30 May 2002 08:44:30 +0800

79 lines

Re: bare board serialization

Dougal Stewart <[log in to unmask]>

Thu, 30 May 2002 09:27:18 +0100

63 lines

Re: bare board serialization

Phil Nutting <[log in to unmask]>

Thu, 30 May 2002 08:21:56 -0400

65 lines

New Thread

BGA replacement

BGA replacement

[log in to unmask]

Tue, 14 May 2002 10:34:19 -0400

60 lines

Re: BGA replacement

Earl Moon <[log in to unmask]>

Tue, 14 May 2002 10:20:48 -0500

33 lines

Re: BGA replacement

Misner, Bruce <[log in to unmask]>

Tue, 14 May 2002 09:28:40 -0600

105 lines

Re: BGA replacement

Steve Owen <[log in to unmask]>

Tue, 14 May 2002 16:35:48 +0100

110 lines

Re: BGA replacement

Eric Dawson <[log in to unmask]>

Tue, 14 May 2002 17:09:07 +0100

69 lines

Re: BGA replacement

Liviu Jurjica-Prundeanu <[log in to unmask]>

Tue, 14 May 2002 11:58:58 -0400

106 lines

Re: BGA replacement

Earl Moon <[log in to unmask]>

Tue, 14 May 2002 11:32:05 -0500

23 lines

Re: BGA replacement

Jeff Ferry <[log in to unmask]>

Tue, 14 May 2002 13:49:07 -0400

122 lines

Re: BGA replacement

Gaby Bogdan <[log in to unmask]>

Tue, 14 May 2002 20:51:17 +0200

63 lines

Re: BGA replacement

Tempea, Ioan <[log in to unmask]>

Tue, 14 May 2002 14:34:21 -0400

159 lines

Re: BGA replacement

Jeff Ferry <[log in to unmask]>

Tue, 14 May 2002 16:20:13 -0400

191 lines

Re: BGA replacement

[log in to unmask]

Wed, 15 May 2002 08:24:20 +0800

148 lines

Re: BGA replacement

Dan R. Johnson <[log in to unmask]>

Wed, 15 May 2002 08:21:23 -0700

27 lines

Re: BGA replacement

Earl Moon <[log in to unmask]>

Wed, 15 May 2002 11:06:00 -0500

29 lines

Re: BGA replacement

David Douthit <[log in to unmask]>

Wed, 15 May 2002 10:12:50 -0700

61 lines

Re: BGA replacement

Earl Moon <[log in to unmask]>

Wed, 15 May 2002 12:10:11 -0500

33 lines

Re: BGA replacement

Seth Goodman <[log in to unmask]>

Sat, 18 May 2002 17:39:14 -0500

88 lines

New Thread

BGA SMD vs NSMD

Re: BGA SMD vs NSMD

Werner Engelmaier <[log in to unmask]>

Wed, 29 May 2002 07:44:57 EDT

32 lines

Re: BGA SMD vs NSMD

[log in to unmask]

Wed, 29 May 2002 10:47:59 EDT

73 lines

New Thread

BGA solder anomalies

BGA solder anomalies

Antonio Souza <[log in to unmask]>

Wed, 1 May 2002 10:17:49 -0500

32 lines

Re: BGA solder anomalies

[log in to unmask]

Wed, 1 May 2002 12:08:02 EDT

46 lines

Re: BGA solder anomalies

Wenger, George M. <[log in to unmask]>

Wed, 1 May 2002 13:08:27 -0400

77 lines

New Thread

BGA Solderability

BGA Solderability

Denis Lefebvre <[log in to unmask]>

Thu, 23 May 2002 07:09:38 -0700

125 lines

Re: BGA Solderability

Beerman, Dennis <[log in to unmask]>

Thu, 23 May 2002 10:08:57 -0500

56 lines

Re: BGA Solderability

Houston, Terri <[log in to unmask]>

Thu, 23 May 2002 09:24:33 -0600

73 lines

Re: BGA Solderability

Jeff Seeger <[log in to unmask]>

Thu, 23 May 2002 13:00:09 -0400

55 lines

Re: BGA Solderability

Earl Moon <[log in to unmask]>

Thu, 23 May 2002 12:05:26 -0500

25 lines

Re: BGA Solderability

Houston, Terri <[log in to unmask]>

Thu, 23 May 2002 11:48:29 -0600

47 lines

Re: BGA Solderability

rgrant <[log in to unmask]>

Thu, 23 May 2002 12:47:41 -0600

57 lines

Re: BGA Solderability

Earl Moon <[log in to unmask]>

Thu, 23 May 2002 14:18:38 -0500

34 lines

Re: BGA Solderability

Earl Moon <[log in to unmask]>

Thu, 23 May 2002 14:21:44 -0500

27 lines

Re: BGA Solderability

Maddox, Allen T <[log in to unmask]>

Fri, 24 May 2002 08:39:37 -0400

67 lines

Re: BGA Solderability

[log in to unmask]

Tue, 28 May 2002 11:01:46 EDT

58 lines

Re: BGA Solderability

[log in to unmask]

Tue, 28 May 2002 11:21:38 EDT

44 lines

Re: BGA Solderability

Earl Moon <[log in to unmask]>

Tue, 28 May 2002 11:42:09 -0500

28 lines

New Thread

BGA warpage - defects in the corners.

BGA warpage - defects in the corners.

Henry Rekers <[log in to unmask]>

Thu, 16 May 2002 13:34:19 -0700

38 lines

Re: BGA warpage - defects in the corners.

Yu, Rudolph <[log in to unmask]>

Thu, 16 May 2002 14:30:18 -0700

70 lines

Re: BGA warpage - defects in the corners.

Jason Gregory <[log in to unmask]>

Thu, 16 May 2002 16:36:37 -0500

30 lines

Re: BGA warpage - defects in the corners.

Henry Rekers <[log in to unmask]>

Thu, 16 May 2002 15:14:52 -0700

82 lines

Re: BGA warpage - defects in the corners.

Werner Engelmaier <[log in to unmask]>

Fri, 17 May 2002 19:33:10 EDT

34 lines

Re: BGA warpage - defects in the corners.

Earl Moon <[log in to unmask]>

Sat, 18 May 2002 12:01:29 -0500

30 lines

Re: BGA warpage - defects in the corners.

Werner Engelmaier <[log in to unmask]>

Sun, 19 May 2002 20:42:23 EDT

30 lines

New Thread

BGA X-ray Cross Section services - Vendors?

BGA X-ray Cross Section services - Vendors?

Rick Thompson <[log in to unmask]>

Thu, 16 May 2002 11:38:32 -0700

40 lines

Re: BGA X-ray Cross Section services - Vendors?

[log in to unmask]

Thu, 16 May 2002 16:01:51 EDT

44 lines

Re: BGA X-ray Cross Section services - Vendors?

[log in to unmask]

Fri, 17 May 2002 09:10:21 +0800

87 lines

Re: BGA X-ray Cross Section services - Vendors?

Ed Popielarski <[log in to unmask]>

Fri, 17 May 2002 06:43:32 -0700

39 lines

Re: BGA X-ray Cross Section services - Vendors?

[log in to unmask]

Fri, 17 May 2002 17:39:12 EDT

24 lines

Re: BGA X-ray Cross Section services - Vendors?

Randy Bock Sr. <[log in to unmask]>

Sat, 18 May 2002 07:51:53 -0400

57 lines

Re: BGA X-ray Cross Section services - Vendors?

[log in to unmask]

Sun, 19 May 2002 00:17:15 EDT

34 lines

New Thread

BGA's on ruggedized assemblies...

BGA's on ruggedized assemblies...

[log in to unmask]

Tue, 14 May 2002 17:08:59 EDT

46 lines

Re: BGA's on ruggedized assemblies...

[log in to unmask]

Wed, 15 May 2002 09:01:22 +0800

79 lines

Re: BGA's on ruggedized assemblies...

Dave Hillman <[log in to unmask]>

Wed, 15 May 2002 09:00:59 -0500

130 lines

Re: BGA's on ruggedized assemblies...

WEEKES, MICHAEL HS-SNS <[log in to unmask]>

Wed, 15 May 2002 10:35:19 -0400

111 lines

Re: BGA's on ruggedized assemblies...

Misner, Bruce <[log in to unmask]>

Wed, 15 May 2002 09:09:20 -0600

45 lines

Re: BGA's on ruggedized assemblies...

Misner, Bruce <[log in to unmask]>

Wed, 15 May 2002 09:25:28 -0600

148 lines

Re: BGA's on ruggedized assemblies...

Werner Engelmaier <[log in to unmask]>

Wed, 15 May 2002 18:27:05 EDT

27 lines

Re: BGA's on ruggedized assemblies...

[log in to unmask]

Thu, 16 May 2002 10:35:39 +0800

166 lines

Re: BGA's on ruggedized assemblies...

Earl Moon <[log in to unmask]>

Thu, 16 May 2002 05:34:18 -0500

29 lines

Re: BGA's on ruggedized assemblies...

Tom Buschor <[log in to unmask]>

Wed, 22 May 2002 12:13:23 -0500

32 lines

New Thread

Board analysis

Board analysis

Bissonnette, Jean-Francois <[log in to unmask]>

Tue, 28 May 2002 10:20:48 -0400

52 lines

Re: Board analysis

Tempea, Ioan <[log in to unmask]>

Tue, 28 May 2002 11:22:12 -0400

97 lines

New Thread

board baking

board baking

WEEKES, MICHAEL HS-SNS <[log in to unmask]>

Tue, 21 May 2002 10:15:31 -0400

36 lines

Re: board baking

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Tue, 21 May 2002 11:29:37 -0400

68 lines

New Thread

Board Cost

Board Cost

Marsico, James <[log in to unmask]>

Thu, 2 May 2002 10:34:19 -0400

37 lines

Re: Board Cost

WEEKES, MICHAEL HS-SNS <[log in to unmask]>

Wed, 15 May 2002 10:58:27 -0400

63 lines

New Thread

Board defect? Purple spot

Board defect? Purple spot

Pelkey, Glenn <[log in to unmask]>

Thu, 16 May 2002 10:14:23 -0700

85 lines

Re: Board defect? Purple spot

Robert B. Denbo <[log in to unmask]>

Thu, 16 May 2002 12:54:19 -0500

128 lines

Re: Board defect? Purple spot

Robert B. Denbo <[log in to unmask]>

Thu, 16 May 2002 14:20:16 -0500

244 lines

Re: Board defect? Purple spot

Bill Decray <[log in to unmask]>

Thu, 16 May 2002 15:55:34 -0400

128 lines

Re: Board defect? Purple spot

Pelkey, Glenn <[log in to unmask]>

Thu, 16 May 2002 11:53:34 -0700

146 lines

New Thread

BOARD EDGE CLEARANCE

BOARD EDGE CLEARANCE

Marsico, James <[log in to unmask]>

Wed, 8 May 2002 07:02:33 -0400

37 lines

Re: BOARD EDGE CLEARANCE

[log in to unmask]

Wed, 8 May 2002 09:11:22 -0700

79 lines

New Thread

Cell phone antenna enhancers...

Cell phone antenna enhancers...

[log in to unmask]

Wed, 29 May 2002 21:56:29 EDT

46 lines

Re: Cell phone antenna enhancers...

Phil Nutting <[log in to unmask]>

Thu, 30 May 2002 08:14:34 -0400

95 lines

Re: Cell phone antenna enhancers...

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 08:36:39 -0500

39 lines

Re: Cell phone antenna enhancers...

Kasprzak, Bill (sys) USX <[log in to unmask]>

Thu, 30 May 2002 10:57:42 -0400

94 lines

Re: Cell phone antenna enhancers...

Marsico, James <[log in to unmask]>

Thu, 30 May 2002 11:03:35 -0400

95 lines

Re: Cell phone antenna enhancers...

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 10:16:46 -0500

50 lines

New Thread

Cell phone antenna enhancers...NTC

Re: Cell phone antenna enhancers...NTC

Bloomquist, Ken <[log in to unmask]>

Thu, 30 May 2002 10:29:45 -0700

37 lines

Re: Cell phone antenna enhancers...NTC

James TerVeen <[log in to unmask]>

Thu, 30 May 2002 13:56:50 -0400

88 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 13:50:46 -0500

33 lines

Re: Cell phone antenna enhancers...NTC

Bissonnette, Jean-Francois <[log in to unmask]>

Thu, 30 May 2002 15:03:43 -0400

74 lines

Re: Cell phone antenna enhancers...NTC

Edward S. Wheeler <[log in to unmask]>

Thu, 30 May 2002 15:17:44 -0400

75 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 14:23:19 -0500

33 lines

Re: Cell phone antenna enhancers...NTC

Bloomquist, Ken <[log in to unmask]>

Thu, 30 May 2002 13:15:27 -0700

32 lines

Re: Cell phone antenna enhancers...NTC

[log in to unmask]

Thu, 30 May 2002 15:23:25 -0500

46 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 15:38:44 -0500

45 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 15:12:22 -0600

63 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 16:11:04 -0500

23 lines

Re: Cell phone antenna enhancers...NTC

Edward S. Wheeler <[log in to unmask]>

Thu, 30 May 2002 17:21:31 -0400

68 lines

Re: Cell phone antenna enhancers...NTC

[log in to unmask]

Thu, 30 May 2002 17:26:47 EDT

73 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 16:45:47 -0500

23 lines

Re: Cell phone antenna enhancers...NTC

Ken Carlile <[log in to unmask]>

Thu, 30 May 2002 18:02:27 -0400

78 lines

Re: Cell phone antenna enhancers...NTC

[log in to unmask]

Thu, 30 May 2002 18:07:14 EDT

67 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 17:08:26 -0500

63 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 17:18:39 -0500

24 lines

Re: Cell phone antenna enhancers...NTC

Sauer, Steven T. <[log in to unmask]>

Fri, 31 May 2002 07:09:23 -0400

23 lines

Re: Cell phone antenna enhancers...NTC

Randy Bock Sr. <[log in to unmask]>

Fri, 31 May 2002 07:30:19 -0400

61 lines

Re: Cell phone antenna enhancers...NTC

Graham Collins <[log in to unmask]>

Fri, 31 May 2002 08:36:59 -0400

98 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 07:51:40 -0500

24 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 08:04:43 -0500

31 lines

Re: Cell phone antenna enhancers...NTC

Guy Ramsey <[log in to unmask]>

Fri, 31 May 2002 09:14:37 -0400

92 lines

Re: Cell phone antenna enhancers...NTC

Mel Parrish <[log in to unmask]>

Fri, 31 May 2002 08:20:43 -0500

62 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 08:24:14 -0500

23 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 08:28:17 -0500

27 lines

Re: Cell phone antenna enhancers...NTC

Phil Nutting <[log in to unmask]>

Fri, 31 May 2002 10:07:13 -0400

67 lines

Re: Cell phone antenna enhancers...NTC

James TerVeen <[log in to unmask]>

Fri, 31 May 2002 10:43:57 -0400

103 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 09:05:47 -0600

95 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 10:12:09 -0500

30 lines

Re: Cell phone antenna enhancers...NTC

Mike Fenner <[log in to unmask]>

Fri, 31 May 2002 16:54:35 +0100

56 lines

Re: Cell phone antenna enhancers...NTC

Randy Bock Sr. <[log in to unmask]>

Fri, 31 May 2002 12:12:17 -0400

138 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 11:43:24 -0500

25 lines

Re: Cell phone antenna enhancers...NTC

Dan R. Johnson <[log in to unmask]>

Fri, 31 May 2002 10:13:52 -0700

39 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 12:32:29 -0500

28 lines

Re: Cell phone antenna enhancers...NTC

Dan R. Johnson <[log in to unmask]>

Fri, 31 May 2002 11:50:20 -0700

29 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 14:14:46 -0500

26 lines

Re: Cell phone antenna enhancers...NTC

Hogg, Blair K. <[log in to unmask]>

Fri, 31 May 2002 11:56:29 -0400

123 lines

Re: Cell phone antenna enhancers...NTC

Werner Engelmaier <[log in to unmask]>

Fri, 31 May 2002 19:33:01 EDT

31 lines

Re: Cell phone antenna enhancers...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 19:07:54 -0500

28 lines

New Thread

Cell phone antenna enhances...NTC

Re: Cell phone antenna enhances...NTC

Kasprzak, Bill (sys) USX <[log in to unmask]>

Fri, 31 May 2002 11:57:33 -0400

141 lines

Re: Cell phone antenna enhances...NTC

Phil Nutting <[log in to unmask]>

Fri, 31 May 2002 12:37:36 -0400

223 lines

Re: Cell phone antenna enhances...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 11:37:59 -0500

35 lines

Re: Cell phone antenna enhances...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 12:27:51 -0500

25 lines

Re: Cell phone antenna enhances...NTC

Dave Snyder <[log in to unmask]>

Fri, 31 May 2002 10:45:56 -0700

171 lines

Re: Cell phone antenna enhances...NTC

Kasprzak, Bill (sys) USX <[log in to unmask]>

Fri, 31 May 2002 13:57:15 -0400

228 lines

Re: Cell phone antenna enhances...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 12:58:40 -0500

42 lines

Re: Cell phone antenna enhances...NTC

Fred Biederman <[log in to unmask]>

Fri, 31 May 2002 15:46:13 -0400

74 lines

Re: Cell phone antenna enhances...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 15:30:39 -0500

27 lines

Re: Cell phone antenna enhances...NTC

Steve Kelly <[log in to unmask]>

Fri, 31 May 2002 17:34:36 -0700

118 lines

New Thread

Ceramic filled Teflon board

Ceramic filled Teflon board

Phillip Hinton <[log in to unmask]>

Thu, 9 May 2002 12:39:51 EDT

50 lines

Re: Ceramic filled Teflon board

Earl Moon <[log in to unmask]>

Thu, 9 May 2002 12:03:40 -0500

35 lines

Re: Ceramic filled Teflon board

William Sullivan <[log in to unmask]>

Thu, 9 May 2002 12:56:56 -0700

54 lines

Re: Ceramic filled Teflon board

Goh Guan Chye <[log in to unmask]>

Fri, 10 May 2002 09:41:27 +0800

77 lines

Re: Ceramic filled Teflon board

Dave Hillman <[log in to unmask]>

Fri, 10 May 2002 11:25:18 -0500

63 lines

New Thread

Class 3 Solder Fillets - SMT 25 mil square pin Headers?

Class 3 Solder Fillets - SMT 25 mil square pin Headers?

Krug, Dick <[log in to unmask]>

Fri, 3 May 2002 10:04:51 -0400

31 lines

Re: Class 3 Solder Fillets - SMT 25 mil square pin Headers?

Mel Parrish <[log in to unmask]>

Fri, 3 May 2002 11:01:56 -0500

76 lines

Re: Class 3 Solder Fillets - SMT 25 mil square pin Headers?

Sauer, Steven T. <[log in to unmask]>

Fri, 3 May 2002 12:32:05 -0400

52 lines

Re: Class 3 Solder Fillets - SMT 25 mil square pin Headers?

David White <[log in to unmask]>

Fri, 3 May 2002 16:17:33 -0400

78 lines

Re: Class 3 Solder Fillets - SMT 25 mil square pin Headers?

Werner Engelmaier <[log in to unmask]>

Sun, 5 May 2002 18:06:10 EDT

32 lines

New Thread

Cleaning of No-clean Assemblies

Cleaning of No-clean Assemblies

Leland Woodall <[log in to unmask]>

Wed, 8 May 2002 15:41:50 -0400

43 lines

Re: Cleaning of No-clean Assemblies

Rudy Sedlak <[log in to unmask]>

Wed, 8 May 2002 16:57:03 EDT

50 lines

Re: Cleaning of No-clean Assemblies

David Douthit <[log in to unmask]>

Wed, 8 May 2002 16:57:59 -0700

72 lines

Re: Cleaning of No-clean Assemblies

Leland Woodall <[log in to unmask]>

Wed, 8 May 2002 20:51:42 -0400

101 lines

Re: Cleaning of No-clean Assemblies

DUTTON Phil <[log in to unmask]>

Thu, 9 May 2002 11:28:28 +1000

56 lines

Re: Cleaning of No-clean Assemblies

Brian Ellis <[log in to unmask]>

Thu, 9 May 2002 09:47:59 +0300

76 lines

Re: Cleaning of No-clean Assemblies

Graham Naisbitt <[log in to unmask]>

Thu, 9 May 2002 10:08:59 +0100

130 lines

Re: Cleaning of No-clean Assemblies

Marsico, James <[log in to unmask]>

Thu, 9 May 2002 08:26:57 -0400

87 lines

Re: Cleaning of No-clean Assemblies

KIPPING, Michael (York Rd) <[log in to unmask]>

Thu, 9 May 2002 14:26:04 +0100

128 lines

Re: Cleaning of No-clean Assemblies

Charlie Pitarys <[log in to unmask]>

Thu, 9 May 2002 10:09:17 -0400

266 lines

Re: Cleaning of No-clean Assemblies

[log in to unmask]

Thu, 9 May 2002 11:59:16 EDT

52 lines

Re: Cleaning of No-clean Assemblies

[log in to unmask]

Thu, 9 May 2002 15:29:07 -0500

40 lines

Re: Cleaning of No-clean Assemblies

[log in to unmask]

Mon, 13 May 2002 07:12:24 -0500

34 lines

Re: Cleaning of No-clean Assemblies

d. terstegge <[log in to unmask]>

Mon, 13 May 2002 15:34:39 +0200

82 lines

New Thread

CLEARANCE FRON PWB EDGES

CLEARANCE FRON PWB EDGES

Marsico, James <[log in to unmask]>

Tue, 7 May 2002 09:14:52 -0400

36 lines

Re: CLEARANCE FRON PWB EDGES

WEEKES, MICHAEL HS-SNS <[log in to unmask]>

Wed, 15 May 2002 10:56:27 -0400

65 lines

New Thread

Coating thickness

Coating thickness

fullname <[log in to unmask]>

Fri, 31 May 2002 10:26:43 +0800

36 lines

Re: Coating thickness

David Douthit <[log in to unmask]>

Thu, 30 May 2002 21:41:40 -0700

63 lines

Re: Coating thickness

Phil Kinner <[log in to unmask]>

Fri, 31 May 2002 09:05:32 +0100

280 lines

Re: Coating thickness

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Fri, 31 May 2002 13:36:35 +0100

88 lines

Re: Coating thickness

Lum Wee Mei <[log in to unmask]>

Sat, 1 Jun 2002 12:06:06 +0800

106 lines

New Thread

conductive blind via plug

conductive blind via plug

tony steinke <[log in to unmask]>

Wed, 29 May 2002 09:33:28 -0700

72 lines

Re: conductive blind via plug

Russell Burdick <[log in to unmask]>

Wed, 29 May 2002 07:52:27 -0700

48 lines

Re: conductive blind via plug

Franck, George <[log in to unmask]>

Wed, 29 May 2002 13:02:09 -0400

138 lines

Re: conductive blind via plug

tony steinke <[log in to unmask]>

Wed, 29 May 2002 13:09:50 -0700

167 lines

Re: conductive blind via plug

Don Vischulis <[log in to unmask]>

Wed, 29 May 2002 13:19:38 -0500

198 lines

Re: conductive blind via plug

Alain Savard <[log in to unmask]>

Wed, 29 May 2002 15:18:23 -0400

77 lines

Re: conductive blind via plug

Russell Burdick <[log in to unmask]>

Wed, 29 May 2002 13:08:36 -0700

111 lines

Re: conductive blind via plug

Earl Moon <[log in to unmask]>

Wed, 29 May 2002 15:14:44 -0500

24 lines

Re: conductive blind via plug

[log in to unmask]

Thu, 30 May 2002 08:36:40 +0800

116 lines

New Thread

Conformal Coating

Conformal Coating

Olivia Mc Dermott <[log in to unmask]>

Thu, 2 May 2002 15:40:09 +0000

31 lines

Re: Conformal Coating

WEEKES, MICHAEL HS-SNS <[log in to unmask]>

Thu, 2 May 2002 12:58:54 -0400

61 lines

Re: Conformal Coating

Chris Almeras <[log in to unmask]>

Thu, 2 May 2002 12:28:38 -0500

69 lines

Re: Conformal Coating

Olivia Mc Dermott <[log in to unmask]>

Fri, 3 May 2002 07:48:08 +0000

82 lines

Re: Conformal Coating

Graham Collins <[log in to unmask]>

Fri, 3 May 2002 08:34:44 -0400

71 lines

Re: Conformal Coating

Chris Almeras <[log in to unmask]>

Fri, 3 May 2002 08:42:35 -0500

341 lines

Re: Conformal Coating

[log in to unmask]

Fri, 3 May 2002 07:53:30 -0600

83 lines

Re: Conformal Coating

Graham Collins <[log in to unmask]>

Fri, 3 May 2002 10:09:57 -0400

118 lines

Re: Conformal Coating

Bloomquist, Ken <[log in to unmask]>

Fri, 3 May 2002 07:21:35 -0700

112 lines

Re: Conformal Coating

Lee Whiteman <[log in to unmask]>

Fri, 3 May 2002 11:26:05 -0400

80 lines

Conformal Coating

Dehoyos, Ramon <[log in to unmask]>

Tue, 14 May 2002 11:47:54 -0700

28 lines

Re: Conformal Coating

Phil Nutting <[log in to unmask]>

Tue, 14 May 2002 16:04:35 -0400

65 lines

Re: Conformal Coating

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Tue, 14 May 2002 21:18:33 +0100

74 lines

Re: Conformal Coating

Graham Collins <[log in to unmask]>

Wed, 15 May 2002 06:57:35 -0400

75 lines

Re: Conformal Coating

Marsico, James <[log in to unmask]>

Wed, 15 May 2002 07:26:51 -0400

69 lines

Re: Conformal Coating

[log in to unmask]

Wed, 15 May 2002 08:28:11 -0500

30 lines

Re: Conformal Coating

[log in to unmask]

Wed, 15 May 2002 15:48:58 EDT

26 lines

Conformal Coating

Misner, Bruce <[log in to unmask]>

Fri, 17 May 2002 12:09:48 -0500

29 lines

Re: Conformal Coating

Dieselberg, Ron <[log in to unmask]>

Fri, 17 May 2002 10:16:06 -0400

170 lines

Re: Conformal Coating

David Douthit <[log in to unmask]>

Fri, 17 May 2002 11:44:37 -0700

59 lines

Re: Conformal Coating

[log in to unmask]

Fri, 17 May 2002 17:46:01 EDT

25 lines

Re: Conformal Coating

Mel Parrish <[log in to unmask]>

Fri, 17 May 2002 16:54:37 -0500

80 lines

New Thread

Conformal coating / gluing

Conformal coating / gluing

Tim McQuay <[log in to unmask]>

Thu, 23 May 2002 12:44:36 -0500

40 lines

Re: Conformal coating / gluing

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Thu, 23 May 2002 20:06:31 +0100

94 lines

Re: Conformal coating / gluing

Connie Korth <[log in to unmask]>

Thu, 23 May 2002 15:09:53 -0500

75 lines

Re: Conformal coating / gluing

Tom Parkinson - Quality System Manager <[log in to unmask]>

Thu, 23 May 2002 16:25:30 -0400

70 lines

Re: Conformal coating / gluing

[log in to unmask]

Fri, 24 May 2002 07:58:55 +0800

95 lines

Re: Conformal coating / gluing

Graham Naisbitt <[log in to unmask]>

Fri, 24 May 2002 11:54:29 +0100

182 lines

Re: Conformal coating / gluing

[log in to unmask]

Tue, 28 May 2002 11:31:52 EDT

39 lines

New Thread

Conformal coating BGAs

Conformal coating BGAs

Linda Woody <[log in to unmask]>

Mon, 20 May 2002 10:53:22 -0500

28 lines

Re: Conformal coating BGAs

[log in to unmask]

Tue, 21 May 2002 13:33:32 +0800

94 lines

Re: Conformal coating BGAs

[log in to unmask]

Tue, 21 May 2002 08:05:03 -0500

33 lines

Re: Conformal coating BGAs

Werner Engelmaier <[log in to unmask]>

Tue, 21 May 2002 10:51:19 EDT

26 lines

Re: Conformal coating BGAs

Graham Naisbitt <[log in to unmask]>

Tue, 21 May 2002 21:40:08 +0100

173 lines

Re: Conformal coating BGAs

Dave Hillman <[log in to unmask]>

Tue, 21 May 2002 17:22:50 -0500

84 lines

Re: Conformal coating BGAs

[log in to unmask]

Wed, 22 May 2002 09:22:27 +0800

73 lines

Re: Conformal coating BGAs

Werner Engelmaier <[log in to unmask]>

Wed, 22 May 2002 04:16:00 EDT

28 lines

Re: Conformal coating BGAs

Tom Buschor <[log in to unmask]>

Wed, 22 May 2002 12:00:36 -0500

36 lines

Re: Conformal coating BGAs

Tegehall Per-Erik <[log in to unmask]>

Thu, 23 May 2002 17:29:36 +0200

237 lines

Re: Conformal coating BGAs

Werner Engelmaier <[log in to unmask]>

Sat, 25 May 2002 22:55:51 EDT

32 lines

New Thread

Crimp Tools

Crimp Tools

[log in to unmask]

Wed, 1 May 2002 15:18:27 -0600

25 lines

Re: Crimp Tools

Guy Ramsey <[log in to unmask]>

Thu, 2 May 2002 07:32:00 -0400

59 lines

New Thread

Crimped connections

Crimped connections

[log in to unmask]

Thu, 16 May 2002 07:45:58 -0400

58 lines

Re: Crimped connections

Charles Caswell <[log in to unmask]>

Thu, 16 May 2002 08:58:24 -0500

95 lines

Re: Crimped connections

Sauer, Steven T. <[log in to unmask]>

Thu, 16 May 2002 10:22:06 -0400

38 lines

Re: Crimped connections

Mel Parrish <[log in to unmask]>

Thu, 16 May 2002 09:45:18 -0500

106 lines

Re: Crimped connections

Dan R. Johnson <[log in to unmask]>

Thu, 16 May 2002 08:00:35 -0700

32 lines

Re: Crimped connections

Kathy Kuhlow <[log in to unmask]>

Thu, 16 May 2002 09:59:12 -0500

50 lines

Re: Crimped connections

[log in to unmask]

Thu, 16 May 2002 11:10:59 -0400

62 lines

Re: Crimped connections

Phil Nutting <[log in to unmask]>

Thu, 16 May 2002 11:48:41 -0400

75 lines

Re: Crimped connections

Dan R. Johnson <[log in to unmask]>

Thu, 16 May 2002 10:08:21 -0700

26 lines

Re: Crimped connections

Kasprzak, Bill (sys) USX <[log in to unmask]>

Fri, 17 May 2002 07:32:02 -0400

107 lines

Re: Crimped connections

Strickland, Mark <[log in to unmask]>

Fri, 17 May 2002 07:09:38 -0500

74 lines

Re: Crimped connections

Phil Nutting <[log in to unmask]>

Fri, 17 May 2002 08:54:49 -0400

173 lines

Re: Crimped connections

Seth Goodman <[log in to unmask]>

Sun, 19 May 2002 13:57:41 -0500

56 lines

Re: Crimped connections

Kasprzak, Bill (sys) USX <[log in to unmask]>

Mon, 20 May 2002 07:01:49 -0400

99 lines

Re: Crimped connections

Seth Goodman <[log in to unmask]>

Mon, 20 May 2002 15:34:57 -0500

69 lines

New Thread

Cycle Time for Solder Paste Printing

Cycle Time for Solder Paste Printing

Becerra Alejandro <[log in to unmask]>

Tue, 7 May 2002 08:02:47 -0500

103 lines

Re: Cycle Time for Solder Paste Printing

[log in to unmask]

Tue, 7 May 2002 11:05:55 -0700

64 lines

New Thread

D.O.E

D.O.E

Barry Gallegos <[log in to unmask]>

Wed, 15 May 2002 13:50:47 -0600

37 lines

Re: D.O.E

Lou Hart <[log in to unmask]>

Wed, 15 May 2002 16:38:18 -0400

65 lines

Re: D.O.E

Michael Bell <[log in to unmask]>

Thu, 16 May 2002 08:43:45 +1200

74 lines

Re: D.O.E

[log in to unmask]

Wed, 15 May 2002 16:24:43 -0500

35 lines

Re: D.O.E

Crepeau, Phil <[log in to unmask]>

Wed, 15 May 2002 14:41:04 -0700

62 lines

Re: D.O.E

Crepeau, Phil <[log in to unmask]>

Wed, 15 May 2002 14:42:02 -0700

60 lines

Re: D.O.E

Barry Gallegos <[log in to unmask]>

Wed, 15 May 2002 15:43:39 -0600

77 lines

Re: D.O.E

Jindra, Larry <[log in to unmask]>

Wed, 15 May 2002 19:08:22 -0700

79 lines

Re: D.O.E

Brian Ellis <[log in to unmask]>

Thu, 16 May 2002 10:09:41 +0300

59 lines

Re: D.O.E

Liviu Jurjica-Prundeanu <[log in to unmask]>

Thu, 16 May 2002 08:09:40 -0400

102 lines

Re: D.O.E

Tempea, Ioan <[log in to unmask]>

Thu, 16 May 2002 08:25:12 -0400

121 lines

Re: D.O.E

Crepeau, Phil <[log in to unmask]>

Thu, 16 May 2002 07:07:13 -0700

80 lines

New Thread

D2PAK devices

D2PAK devices

Reid, Lorraine <[log in to unmask]>

Thu, 23 May 2002 12:40:44 +0100

40 lines

Re: D2PAK devices

Sauer, Steven T. <[log in to unmask]>

Thu, 23 May 2002 10:18:29 -0400

46 lines

Re: D2PAK devices

Guy Ramsey <[log in to unmask]>

Thu, 23 May 2002 10:33:00 -0400

53 lines

Re: D2PAK devices

Sauer, Steven T. <[log in to unmask]>

Fri, 24 May 2002 08:34:08 -0400

46 lines

New Thread

Danny Harkins/CSI is out of the office.

Danny Harkins/CSI is out of the office.

[log in to unmask]

Tue, 28 May 2002 01:00:45 -0400

25 lines

New Thread

Dielectric constant for cores and prepeg

Dielectric constant for cores and prepeg

Fineline Circuits, Inc. <[log in to unmask]>

Fri, 3 May 2002 14:57:37 -0400

61 lines

New Thread

Dielectric Constants For Core and Prepreg

Dielectric Constants For Core and Prepreg

Fineline Circuits, Inc. <[log in to unmask]>

Fri, 3 May 2002 13:04:16 -0400

71 lines

Re: Dielectric Constants For Core and Prepreg

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 12:12:14 -0500

25 lines

Re: Dielectric Constants For Core and Prepreg

Scott Kramer <[log in to unmask]>

Thu, 2 May 2002 10:49:58 -0700

136 lines

Re: Dielectric Constants For Core and Prepreg

Martyn Gaudion <[log in to unmask]>

Thu, 2 May 2002 19:52:02 +0100

95 lines

Re: Dielectric Constants For Core and Prepreg

[log in to unmask]

Tue, 28 May 2002 09:46:21 EDT

50 lines

New Thread

Dielectric material vs. Solder mask

Dielectric material vs. Solder mask

Bev Christian <[log in to unmask]>

Fri, 17 May 2002 15:39:26 -0400

27 lines

New Thread

DPMO benchmarking

Re: DPMO benchmarking

Jack Crawford <[log in to unmask]>

Wed, 29 May 2002 16:28:44 -0500

96 lines

New Thread

dross disposal

dross disposal

Bissonnette, Jean-Francois <[log in to unmask]>

Wed, 15 May 2002 10:33:30 -0400

51 lines

Re: dross disposal

Phil Nutting <[log in to unmask]>

Wed, 15 May 2002 11:17:20 -0400

89 lines

Re: dross disposal

Charles Caswell <[log in to unmask]>

Wed, 15 May 2002 10:46:55 -0500

84 lines

Re: dross disposal

Graham Collins <[log in to unmask]>

Wed, 15 May 2002 12:10:16 -0400

91 lines

Re: dross disposal

Bloomquist, Ken <[log in to unmask]>

Wed, 15 May 2002 09:45:55 -0700

59 lines

New Thread

Econonic Boom

Econonic Boom

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 10:06:44 -0500

66 lines

New Thread

Electrical Isolation in dbm ?

Electrical Isolation in dbm ?

Goh Guan Chye <[log in to unmask]>

Thu, 16 May 2002 11:29:03 +0800

32 lines

Re: Electrical Isolation in dbm ?

Seth Goodman <[log in to unmask]>

Sat, 18 May 2002 18:11:19 -0500

73 lines

New Thread

Electronics Manufacturers Association Meeting (Seattle)

Electronics Manufacturers Association Meeting (Seattle)

Bloomquist, Ken <[log in to unmask]>

Thu, 9 May 2002 06:54:56 -0700

98 lines

New Thread

ESD and equipment isolation

ESD and equipment isolation

Jim Jenkins <[log in to unmask]>

Thu, 30 May 2002 13:25:40 -0500

44 lines

Re: ESD and equipment isolation

Earl Moon <[log in to unmask]>

Thu, 30 May 2002 14:27:06 -0500

24 lines

Re: ESD and equipment isolation

Kane, Joseph <[log in to unmask]>

Thu, 30 May 2002 16:17:53 -0400

100 lines

Re: ESD and equipment isolation

Guy Ramsey <[log in to unmask]>

Thu, 30 May 2002 17:22:21 -0400

85 lines

Re: ESD and equipment isolation

Gary Camac <[log in to unmask]>

Fri, 31 May 2002 07:44:49 -0500

106 lines

New Thread

Eutectic solder paste on silver plated boards

Eutectic solder paste on silver plated boards

Vandendolder, Ron <[log in to unmask]>

Fri, 10 May 2002 08:08:06 -0400

29 lines

Re: Eutectic solder paste on silver plated boards

Werner Engelmaier <[log in to unmask]>

Fri, 10 May 2002 20:00:43 EDT

27 lines

New Thread

ExposedCu

ExposedCu

[log in to unmask]

Tue, 7 May 2002 11:53:15 EDT

51 lines

Re: ExposedCu

Bloomquist, Ken <[log in to unmask]>

Tue, 7 May 2002 11:35:18 -0700

38 lines

New Thread

Film Capacitors...geeze!

Film Capacitors...geeze!

[log in to unmask]

Thu, 23 May 2002 21:51:58 EDT

38 lines

Re: Film Capacitors...geeze!

Guy Ramsey <[log in to unmask]>

Fri, 24 May 2002 07:01:53 -0400

77 lines

Re: Film Capacitors...geeze!

[log in to unmask]

Fri, 24 May 2002 07:04:12 -0500

97 lines

Re: Film Capacitors...geeze!

[log in to unmask]

Fri, 24 May 2002 08:58:50 EDT

106 lines

Re: Film Capacitors...geeze!

Tostevin, Bruce <[log in to unmask]>

Fri, 24 May 2002 10:15:00 -0500

83 lines

Re: Film Capacitors...geeze!

[log in to unmask]

Fri, 24 May 2002 11:44:43 EDT

55 lines

New Thread

Fire Up for IPC Annual Meeting 2002

Fire Up for IPC Annual Meeting 2002

John Perry <[log in to unmask]>

Thu, 23 May 2002 10:12:13 -0500

66 lines

Re: Fire Up for IPC Annual Meeting 2002

[log in to unmask]

Thu, 23 May 2002 14:19:56 -0500

23 lines

Re: Fire Up for IPC Annual Meeting 2002

Werner Engelmaier <[log in to unmask]>

Sat, 25 May 2002 22:55:52 EDT

25 lines

New Thread

First Article Inspection of bare boards

First Article Inspection of bare boards

d. terstegge <[log in to unmask]>

Tue, 14 May 2002 10:34:39 +0200

37 lines

Re: First Article Inspection of bare boards

Don Vischulis <[log in to unmask]>

Tue, 14 May 2002 07:19:51 -0500

75 lines

Re: First Article Inspection of bare boards

Hogg, Blair K. <[log in to unmask]>

Tue, 14 May 2002 09:44:46 -0400

29 lines

Re: First Article Inspection of bare boards

Kathy Kuhlow <[log in to unmask]>

Tue, 14 May 2002 08:57:57 -0500

55 lines

New Thread

Flip-flop panels

Re: Flip-flop panels

Eddie Rocha <[log in to unmask]>

Wed, 1 May 2002 17:11:39 -0700

32 lines

Re: Flip-flop panels

Tempea, Ioan <[log in to unmask]>

Thu, 2 May 2002 08:20:34 -0400

47 lines

New Thread

Flux on top of PCBs from wave

Flux on top of PCBs from wave

David White <[log in to unmask]>

Thu, 9 May 2002 10:33:02 -0400

29 lines

Re: Flux on top of PCBs from wave

Charles Caswell <[log in to unmask]>

Thu, 9 May 2002 10:43:56 -0500

63 lines

Re: Flux on top of PCBs from wave

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Thu, 9 May 2002 11:40:43 -0400

70 lines

Re: Flux on top of PCBs from wave

David Douthit <[log in to unmask]>

Thu, 9 May 2002 10:27:11 -0700

74 lines

New Thread

fLUX RESIDUE IN NO CLEAN SOLDER WIRE

fLUX RESIDUE IN NO CLEAN SOLDER WIRE

Karnwal, Pankaj <[log in to unmask]>

Fri, 31 May 2002 08:03:54 +0200

44 lines

Re: fLUX RESIDUE IN NO CLEAN SOLDER WIRE

Steve Owen <[log in to unmask]>

Fri, 31 May 2002 07:45:19 +0100

83 lines

Re: fLUX RESIDUE IN NO CLEAN SOLDER WIRE

Brian Ellis <[log in to unmask]>

Fri, 31 May 2002 11:56:58 +0300

68 lines

New Thread

For Francois in case this didn't get posted to the technet

For Francois in case this didn't get posted to the technet

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 10:50:56 -0500

47 lines

Re: For Francois in case this didn't get posted to the technet

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 11:20:19 -0500

190 lines

New Thread

FPBGA Area Ratio Question

FPBGA Area Ratio Question

bbarr <[log in to unmask]>

Wed, 29 May 2002 11:40:15 -0400

44 lines

Re: FPBGA Area Ratio Question

Becerra Alejandro <[log in to unmask]>

Wed, 29 May 2002 12:41:06 -0500

255 lines

Re: FPBGA Area Ratio Question

bbarr <[log in to unmask]>

Wed, 29 May 2002 14:40:08 -0400

392 lines

Re: FPBGA Area Ratio Question

Dave Pahlas <[log in to unmask]>

Wed, 29 May 2002 17:00:33 -0400

449 lines

Re: FPBGA Area Ratio Question

Becerra Alejandro <[log in to unmask]>

Wed, 29 May 2002 16:01:13 -0500

432 lines

Re: FPBGA Area Ratio Question

bbarr <[log in to unmask]>

Wed, 29 May 2002 17:44:07 -0400

111 lines

Re: FPBGA Area Ratio Question

Ahne Oosterhof <[log in to unmask]>

Wed, 29 May 2002 15:16:38 -0700

96 lines

Re: FPBGA Area Ratio Question

Ahne Oosterhof <[log in to unmask]>

Wed, 29 May 2002 15:39:48 -0700

461 lines

New Thread

Gold Reclaim

Gold Reclaim

[log in to unmask]

Tue, 21 May 2002 12:27:46 -0400

33 lines

New Thread

good to be back

good to be back

William Sullivan <[log in to unmask]>

Thu, 9 May 2002 07:11:23 -0700

28 lines

New Thread

Guidelines or standards for number of missing unused BGA pads allowed

Guidelines or standards for number of missing unused BGA pads allowed

Francis Sun <[log in to unmask]>

Wed, 8 May 2002 12:02:57 -0400

41 lines

Re: Guidelines or standards for number of missing unused BGA pads allowed

Earl Moon <[log in to unmask]>

Wed, 8 May 2002 12:41:39 -0500

26 lines

Re: Guidelines or standards for number of missing unused BGA pads allowed

Francis Sun <[log in to unmask]>

Wed, 8 May 2002 16:37:30 -0400

66 lines

Re: Guidelines or standards for number of missing unused BGA pads allowed

Guy Ramsey <[log in to unmask]>

Thu, 9 May 2002 08:37:19 -0400

109 lines

New Thread

HDI and Sanmina

HDI and Sanmina

Earl Moon <[log in to unmask]>

Mon, 6 May 2002 09:58:55 -0500

81 lines

Re: HDI and Sanmina

David Douthit <[log in to unmask]>

Mon, 6 May 2002 10:01:26 -0700

106 lines

Re: HDI and Sanmina

Earl Moon <[log in to unmask]>

Mon, 6 May 2002 12:30:56 -0500

31 lines

Re: HDI and Sanmina

Jana Carraway <[log in to unmask]>

Mon, 6 May 2002 11:06:25 -0700

117 lines

Re: HDI and Sanmina

Earl Moon <[log in to unmask]>

Mon, 6 May 2002 13:09:21 -0500

34 lines

Re: HDI and Sanmina

Jana Carraway <[log in to unmask]>

Mon, 6 May 2002 11:43:38 -0700

58 lines

Re: HDI and Sanmina

Kathy Kuhlow <[log in to unmask]>

Mon, 6 May 2002 14:21:59 -0500

52 lines

Re: HDI and Sanmina

Dwight Mattix <[log in to unmask]>

Mon, 6 May 2002 15:55:52 -0700

136 lines

Re: HDI and Sanmina

Dwight Mattix <[log in to unmask]>

Mon, 6 May 2002 16:07:08 -0700

48 lines

Re: HDI and Sanmina

Earl Moon <[log in to unmask]>

Mon, 6 May 2002 19:07:43 -0500

47 lines

Re: HDI and Sanmina

Seth Goodman <[log in to unmask]>

Tue, 7 May 2002 01:14:48 -0500

88 lines

Re: HDI and Sanmina

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 06:13:18 -0500

40 lines

New Thread

High lead composition solder paste and rinse water.

High lead composition solder paste and rinse water.

Charlie Pitarys <[log in to unmask]>

Wed, 1 May 2002 11:51:48 -0400

90 lines

Re: High lead composition solder paste and rinse water.

Wenger, George M. <[log in to unmask]>

Wed, 1 May 2002 13:28:05 -0400

168 lines

Re: High lead composition solder paste and rinse water.

Guy Ramsey <[log in to unmask]>

Wed, 1 May 2002 14:40:49 -0400

141 lines

Re: High lead composition solder paste and rinse water.

[log in to unmask]

Wed, 1 May 2002 14:10:55 -0500

29 lines

Re: High lead composition solder paste and rinse water.

Bev Christian <[log in to unmask]>

Wed, 1 May 2002 17:13:02 -0400

187 lines

Re: High lead composition solder paste and rinse water.

Charlie Pitarys <[log in to unmask]>

Thu, 2 May 2002 08:47:13 -0400

154 lines

Re: High lead composition solder paste and rinse water.

Guy Ramsey <[log in to unmask]>

Thu, 2 May 2002 10:07:46 -0400

89 lines

Re: High lead composition solder paste and rinse water.

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Thu, 2 May 2002 16:33:07 +0100

218 lines

Re: High lead composition solder paste and rinse water.

Mike Fenner <[log in to unmask]>

Thu, 2 May 2002 17:12:03 +0100

181 lines

New Thread

high Tg FR4

high Tg FR4

tony steinke <[log in to unmask]>

Tue, 21 May 2002 16:25:34 -0700

76 lines

New Thread

High Voltage tracking on pbc surface

High Voltage tracking on pbc surface

Phil Nutting <[log in to unmask]>

Wed, 15 May 2002 17:03:23 -0400

51 lines

Re: High Voltage tracking on pbc surface

Joseph Keary <[log in to unmask]>

Wed, 15 May 2002 15:51:05 -0700

81 lines

Re: High Voltage tracking on pbc surface

Brian Ellis <[log in to unmask]>

Thu, 16 May 2002 10:05:27 +0300

96 lines

Re: High Voltage tracking on pbc surface

[log in to unmask]

Thu, 16 May 2002 08:02:54 -0500

32 lines

Re: High Voltage tracking on pbc surface

Earl Moon <[log in to unmask]>

Thu, 16 May 2002 08:18:56 -0500

30 lines

Re: High Voltage tracking on pbc surface

Brian Ellis <[log in to unmask]>

Thu, 16 May 2002 17:37:52 +0300

58 lines

Re: High Voltage tracking on pbc surface

Earl Moon <[log in to unmask]>

Thu, 16 May 2002 09:54:28 -0500

26 lines

Re: High Voltage tracking on pbc surface

Brian Ellis <[log in to unmask]>

Thu, 16 May 2002 18:11:17 +0300

44 lines

Re: High Voltage tracking on pbc surface

Earl Moon <[log in to unmask]>

Thu, 16 May 2002 11:16:47 -0400

62 lines

Re: High Voltage tracking on pbc surface

[log in to unmask]

Thu, 16 May 2002 11:36:57 -0500

31 lines

Re: High Voltage tracking on pbc surface

Dougal Stewart <[log in to unmask]>

Thu, 16 May 2002 20:58:54 +0100

77 lines

Re: High Voltage tracking on pbc surface

Rob Legg <[log in to unmask]>

Thu, 16 May 2002 21:49:37 -0400

61 lines

New Thread

hole plating peel test

hole plating peel test

Dan R. Johnson <[log in to unmask]>

Wed, 1 May 2002 16:36:32 -0700

48 lines

New Thread

Hole routing in PCBs

Hole routing in PCBs

Phil Nutting <[log in to unmask]>

Wed, 1 May 2002 12:55:50 -0400

44 lines

Re: Hole routing in PCBs

John Parsons <[log in to unmask]>

Wed, 1 May 2002 10:51:43 -0700

104 lines

Re: Hole routing in PCBs

Randy Bock Sr. <[log in to unmask]>

Wed, 1 May 2002 14:18:53 -0400

80 lines

Re: Hole routing in PCBs

Robert B. Denbo <[log in to unmask]>

Wed, 1 May 2002 13:17:05 -0500

92 lines

Re: Hole routing in PCBs

Roger Stoops <[log in to unmask]>

Wed, 1 May 2002 15:50:28 -0400

90 lines

Re: Hole routing in PCBs

Don Vischulis <[log in to unmask]>

Wed, 1 May 2002 15:10:42 -0500

124 lines

Re: Hole routing in PCBs

Seth Goodman <[log in to unmask]>

Wed, 1 May 2002 17:13:25 -0500

44 lines

New Thread

HTML 3.2

Re: HTML 3.2

[log in to unmask]

Mon, 6 May 2002 13:44:20 EDT

43 lines

New Thread

Interesting addition to an ealier discussion

Interesting addition to an ealier discussion

Kathy Kuhlow <[log in to unmask]>

Fri, 3 May 2002 09:26:17 -0500

179 lines

New Thread

IPC-4552 spec for ENIG

IPC-4552 spec for ENIG

Debbie Schepis <[log in to unmask]>

Mon, 13 May 2002 08:52:38 -0400

27 lines

Re: IPC-4552 spec for ENIG

George Milad <[log in to unmask]>

Mon, 13 May 2002 09:18:31 EDT

45 lines

New Thread

IPC-DC Boston area mtg, 21-May

IPC-DC Boston area mtg, 21-May

Jeff Seeger <[log in to unmask]>

Tue, 14 May 2002 16:04:26 -0400

103 lines

New Thread

Keeping RA and OA flux separate

Keeping RA and OA flux separate

Phil Nutting <[log in to unmask]>

Tue, 21 May 2002 09:32:55 -0400

31 lines

Re: Keeping RA and OA flux separate

Brian Ellis <[log in to unmask]>

Tue, 21 May 2002 18:18:41 +0300

58 lines

Keeping RA and OA flux separate

Phil Nutting <[log in to unmask]>

Tue, 21 May 2002 09:32:55 -0400

50 lines

Re: Keeping RA and OA flux separate

Kathy Kuhlow <[log in to unmask]>

Tue, 21 May 2002 16:12:10 -0500

51 lines

New Thread

Locating Jay Brusse

Locating Jay Brusse

Phillip Hinton <[log in to unmask]>

Tue, 7 May 2002 00:22:11 EDT

42 lines

Re: Locating Jay Brusse

David Douthit <[log in to unmask]>

Mon, 6 May 2002 22:12:01 -0700

67 lines

New Thread

Looking for a capacitance meter

Looking for a capacitance meter

Houston, Terri <[log in to unmask]>

Tue, 21 May 2002 15:00:27 -0500

33 lines

Re: Looking for a capacitance meter

Dan R. Johnson <[log in to unmask]>

Tue, 21 May 2002 16:21:01 -0700

34 lines

Re: Looking for a capacitance meter

Sauer, Steven T. <[log in to unmask]>

Wed, 22 May 2002 07:38:17 -0400

34 lines

Re: Looking for a capacitance meter

Hogg, Blair K. <[log in to unmask]>

Wed, 22 May 2002 08:53:56 -0400

59 lines

Re: Looking for a capacitance meter

[log in to unmask]

Wed, 22 May 2002 08:27:39 -0500

25 lines

Re: Looking for a capacitance meter

Barmuta, Mike <[log in to unmask]>

Wed, 22 May 2002 07:49:13 -0700

70 lines

New Thread

Looking for A Solderability Spec

Looking for A Solderability Spec

Dave Hillman <[log in to unmask]>

Fri, 17 May 2002 13:18:08 -0500

28 lines

Re: Looking for A Solderability Spec

David Fish <[log in to unmask]>

Fri, 17 May 2002 16:29:01 -0700

62 lines

Re: Looking for A Solderability Spec

WEEKES, MICHAEL HS-SNS <[log in to unmask]>

Fri, 17 May 2002 16:29:31 -0400

57 lines

Re: Looking for A Solderability Spec

Guy Ramsey <[log in to unmask]>

Fri, 17 May 2002 17:12:12 -0400

62 lines

Re: Looking for A Solderability Spec

[log in to unmask]

Fri, 17 May 2002 16:17:44 -0500

59 lines

Re: Looking for A Solderability Spec

Earl Moon <[log in to unmask]>

Sat, 18 May 2002 12:06:24 -0500

27 lines

New Thread

Looking for A Solderability Spec - No technical content contained

Re: Looking for A Solderability Spec - No technical content contained

Dave Hillman <[log in to unmask]>

Fri, 17 May 2002 16:31:28 -0500

87 lines

Re: Looking for A Solderability Spec - No technical content contained

Earl Moon <[log in to unmask]>

Sat, 18 May 2002 11:52:34 -0500

29 lines

Re: Looking for A Solderability Spec - No technical content contained

Earl Moon <[log in to unmask]>

Sat, 18 May 2002 11:54:42 -0500

21 lines

Re: Looking for A Solderability Spec - No technical content contained

[log in to unmask]

Mon, 20 May 2002 15:23:52 EDT

48 lines

Re: Looking for A Solderability Spec - No technical content contained

Dave Hillman <[log in to unmask]>

Mon, 20 May 2002 16:43:23 -0500

66 lines

New Thread

Looking for place who offer classes on ICT/DFT in Bay Area

Looking for place who offer classes on ICT/DFT in Bay Area

Ken Patel <[log in to unmask]>

Thu, 30 May 2002 15:40:18 -0700

32 lines

New Thread

Looking for recent PCB Reliability model

Looking for recent PCB Reliability model

Jim Lamb <[log in to unmask]>

Wed, 15 May 2002 00:13:34 -0700

30 lines

Re: Looking for recent PCB Reliability model

Werner Engelmaier <[log in to unmask]>

Thu, 16 May 2002 18:45:31 EDT

32 lines

Re: Looking for recent PCB Reliability model

Guy Ramsey <[log in to unmask]>

Wed, 29 May 2002 07:50:24 -0400

62 lines

New Thread

Low Temp BGA Balls

Low Temp BGA Balls

Jindra, Larry <[log in to unmask]>

Mon, 6 May 2002 16:24:00 -0700

29 lines

Re: Low Temp BGA Balls

[log in to unmask]

Mon, 6 May 2002 20:28:37 EDT

108 lines

Re: Low Temp BGA Balls

[log in to unmask]

Tue, 7 May 2002 12:15:02 +0800

105 lines

Re: Low Temp BGA Balls

Marsico, James <[log in to unmask]>

Tue, 7 May 2002 07:05:56 -0400

74 lines

New Thread

Mark Orlowski/PEMSTAR Inc is out of the office.

Mark Orlowski/PEMSTAR Inc is out of the office.

Mark Orlowski/PEMSTAR Inc <[log in to unmask]>

Wed, 15 May 2002 01:01:40 -0500

24 lines

New Thread

Mechanical Strength of Solder Joints

Re: Mechanical Strength of Solder Joints

Werner Engelmaier <[log in to unmask]>

Wed, 1 May 2002 19:28:48 EDT

33 lines

New Thread

Metal core PCB's

Metal core PCB's

David Bailey <[log in to unmask]>

Fri, 24 May 2002 15:01:35 +1000

121 lines

Re: Metal core PCB's

Joe Fjelstad <[log in to unmask]>

Fri, 24 May 2002 09:34:55 EDT

75 lines

Re: Metal core PCB's

[log in to unmask]

Fri, 24 May 2002 12:13:58 EDT

103 lines

Re: Metal core PCB's

Earl Moon <[log in to unmask]>

Fri, 24 May 2002 14:06:04 -0500

22 lines

Re: Metal core PCB's

MA Ranganath/SMPLB/SEC/SANMAR <[log in to unmask]>

Sat, 25 May 2002 10:36:11 +0530

159 lines

Re: Metal core PCB's

Tom Waznis <[log in to unmask]>

Sat, 25 May 2002 04:47:48 -0700

63 lines

New Thread

Mil spec approval

Mil spec approval

Gordon Falconer <[log in to unmask]>

Thu, 2 May 2002 20:07:15 -0700

82 lines

Re: Mil spec approval

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 14:24:09 -0500

34 lines

Re: Mil spec approval

MA Ranganath/SMPLB/SEC/SANMAR <[log in to unmask]>

Thu, 2 May 2002 20:25:10 -0700

138 lines

Re: Mil spec approval

Joseph Spicuzza <[log in to unmask]>

Fri, 3 May 2002 13:59:09 -0400

65 lines

Re: Mil spec approval

[log in to unmask]

Fri, 3 May 2002 15:03:07 EDT

21 lines

Re: Mil spec approval

Joseph Spicuzza <[log in to unmask]>

Fri, 3 May 2002 15:57:26 -0400

50 lines

New Thread

no clean paste for High frequencies

no clean paste for High frequencies

Zweigart, Siegmund <[log in to unmask]>

Fri, 24 May 2002 10:51:20 +0200

25 lines

Re: no clean paste for High frequencies

[log in to unmask]

Fri, 24 May 2002 07:32:53 -0500

36 lines

Re: no clean paste for High frequencies

[log in to unmask]

Tue, 28 May 2002 08:20:42 EDT

32 lines

New Thread

No Clean?

No Clean?

Henry Rekers <[log in to unmask]>

Tue, 14 May 2002 08:00:28 -0700

27 lines

New Thread

NTC - The Gregory's are a team now...

NTC - The Gregory's are a team now...

[log in to unmask]

Thu, 30 May 2002 19:14:48 EDT

31 lines

Re: NTC - The Gregory's are a team now...

Gaby Bogdan <[log in to unmask]>

Fri, 31 May 2002 08:10:26 +0200

64 lines

Re: NTC - The Gregory's are a team now...

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 01:06:17 -0500

38 lines

Re: NTC - The Gregory's are a team now...

Gaby Bogdan <[log in to unmask]>

Fri, 31 May 2002 16:27:52 +0200

73 lines

Re: NTC - The Gregory's are a team now...

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 08:43:10 -0500

34 lines

Re: NTC - The Gregory's are a team now...

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 09:01:36 -0600

108 lines

Re: NTC - The Gregory's are a team now...

Gaby Bogdan <[log in to unmask]>

Fri, 31 May 2002 18:28:59 +0200

154 lines

Re: NTC - The Gregory's are a team now...

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 11:47:21 -0500

27 lines

Re: NTC - The Gregory's are a team now...

Gaby Bogdan <[log in to unmask]>

Fri, 31 May 2002 20:18:52 +0200

52 lines

Re: NTC - The Gregory's are a team now...

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 12:34:20 -0500

34 lines

New Thread

OT Cell phone antenna enhances...NTC

OT Cell phone antenna enhances...NTC

Denis Lefebvre <[log in to unmask]>

Fri, 31 May 2002 15:38:31 -0700

63 lines

Re: OT Cell phone antenna enhances...NTC

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 19:03:49 -0500

26 lines

New Thread

OT- wasn't an experiment..

OT- wasn't an experiment..

[log in to unmask]

Fri, 31 May 2002 22:26:03 EDT

54 lines

Re: OT- wasn't an experiment..

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 22:37:02 -0600

100 lines

Re: OT- wasn't an experiment..

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 23:36:42 -0500

24 lines

New Thread

Palladium Leads

Palladium Leads

Henry Rekers <[log in to unmask]>

Wed, 8 May 2002 17:33:22 -0700

28 lines

Re: Palladium Leads

Sauer, Steven T. <[log in to unmask]>

Thu, 9 May 2002 07:32:09 -0400

44 lines

Re: Palladium Leads

Bev Christian <[log in to unmask]>

Thu, 9 May 2002 07:59:23 -0400

72 lines

Re: Palladium Leads

[log in to unmask]

Thu, 9 May 2002 08:36:16 EDT

71 lines

Re: Palladium Leads

Earl Moon <[log in to unmask]>

Thu, 9 May 2002 09:07:11 -0400

110 lines

Re: Palladium Leads

Peter Barton <[log in to unmask]>

Thu, 9 May 2002 14:59:00 +0100

112 lines

Re: Palladium Leads

Guy Ramsey <[log in to unmask]>

Thu, 9 May 2002 11:20:25 -0400

152 lines

Re: Palladium Leads

[log in to unmask]

Thu, 9 May 2002 11:26:45 EDT

98 lines

Re: Palladium Leads

Wenger, George M. <[log in to unmask]>

Thu, 9 May 2002 13:11:48 -0400

246 lines

Re: Palladium Leads

Mel Parrish <[log in to unmask]>

Thu, 9 May 2002 15:46:07 -0500

268 lines

Re: Palladium Leads

Dave Hillman <[log in to unmask]>

Fri, 10 May 2002 14:22:47 -0500

276 lines

New Thread

Palladium Leads - Flux Choices

Re: Palladium Leads - Flux Choices

[log in to unmask]

Mon, 13 May 2002 08:36:55 +0800

339 lines

New Thread

Panelization sanity check needed

Panelization sanity check needed

Lambert, Katherine A. <[log in to unmask]>

Tue, 7 May 2002 12:43:04 -0700

51 lines

Re: Panelization sanity check needed

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 14:55:28 -0500

38 lines

Re: Panelization sanity check needed

Seth Goodman <[log in to unmask]>

Wed, 8 May 2002 00:08:20 -0500

52 lines

Re: Panelization sanity check needed

Brian L. Guidi <[log in to unmask]>

Wed, 8 May 2002 08:05:15 -0400

113 lines

Re: Panelization sanity check needed

Earl Moon <[log in to unmask]>

Wed, 8 May 2002 07:58:13 -0500

24 lines

Re: Panelization sanity check needed

Eddie Rocha <[log in to unmask]>

Wed, 8 May 2002 09:43:58 -0700

26 lines

New Thread

Parts List Definition

Parts List Definition

Richard Hamilton <[log in to unmask]>

Mon, 6 May 2002 22:14:23 -0700

34 lines

Re: Parts List Definition

[log in to unmask]

Tue, 7 May 2002 16:19:01 +0800

107 lines

Re: Parts List Definition

Dan R. Johnson <[log in to unmask]>

Tue, 7 May 2002 08:03:27 -0700

38 lines

Re: Parts List Definition

Kathy Kuhlow <[log in to unmask]>

Tue, 7 May 2002 11:24:06 -0500

80 lines

New Thread

pcb design

pcb design

Frank Conti <[log in to unmask]>

Mon, 20 May 2002 10:59:30 EDT

56 lines

Re: pcb design

Brooks,Bill <[log in to unmask]>

Mon, 20 May 2002 09:28:18 -0700

144 lines

Re: pcb design

Denis Lefebvre <[log in to unmask]>

Mon, 20 May 2002 10:01:49 -0700

144 lines

Re: pcb design

William Sullivan <[log in to unmask]>

Mon, 20 May 2002 10:29:32 -0700

61 lines

Re: pcb design

Dan R. Johnson <[log in to unmask]>

Mon, 20 May 2002 12:06:51 -0700

64 lines

New Thread

PCB MATERIAL with low OUTGASSING Characteristics....

PCB MATERIAL with low OUTGASSING Characteristics....

Race, Albert <[log in to unmask]>

Thu, 16 May 2002 13:53:18 -0400

32 lines

New Thread

PCB materials

PCB materials

Torres, Roberto <[log in to unmask]>

Wed, 22 May 2002 14:53:12 -0400

55 lines

Re: PCB materials

rgrant <[log in to unmask]>

Thu, 23 May 2002 10:37:44 -0600

97 lines

Re: PCB materials

Torres, Roberto <[log in to unmask]>

Thu, 23 May 2002 13:01:13 -0400

118 lines

Re: PCB materials

Earl Moon <[log in to unmask]>

Thu, 23 May 2002 12:11:11 -0500

30 lines

Re: PCB materials

[log in to unmask]

Tue, 28 May 2002 11:10:32 EDT

42 lines

Re: PCB materials

[log in to unmask]

Tue, 28 May 2002 11:17:12 EDT

45 lines

Re: PCB materials

[log in to unmask]

Tue, 28 May 2002 11:28:28 EDT

43 lines

Re: PCB materials

Earl Moon <[log in to unmask]>

Tue, 28 May 2002 11:38:29 -0500

37 lines

Re: PCB materials

Torres, Roberto <[log in to unmask]>

Wed, 29 May 2002 13:11:18 -0400

94 lines

New Thread

Plant closures

Plant closures

Scott Westheimer <[log in to unmask]>

Sat, 27 Apr 2002 12:27:20 -0400

74 lines

Re: Plant closures

Joe Fjelstad <[log in to unmask]>

Mon, 13 May 2002 12:48:56 EDT

45 lines

Re: Plant closures

WEEKES, MICHAEL HS-SNS <[log in to unmask]>

Mon, 13 May 2002 14:32:00 -0400

86 lines

New Thread

power traces

power traces

Eddie Rocha <[log in to unmask]>

Thu, 23 May 2002 11:47:16 -0700

22 lines

New Thread

Productivity Way Up

Productivity Way Up

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 10:36:38 -0500

30 lines

Re: Productivity Way Up

Kathy Kuhlow <[log in to unmask]>

Tue, 7 May 2002 11:16:31 -0500

63 lines

Re: Productivity Way Up

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 11:40:41 -0500

35 lines

Re: Productivity Way Up

Dan R. Johnson <[log in to unmask]>

Tue, 7 May 2002 10:01:40 -0700

28 lines

Re: Productivity Way Up

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 12:20:01 -0500

42 lines

Re: Productivity Way Up

Jeff Ferry <[log in to unmask]>

Tue, 7 May 2002 14:46:00 -0400

82 lines

Re: Productivity Way Up

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 13:59:15 -0500

36 lines

Re: Productivity Way Up

Dan R. Johnson <[log in to unmask]>

Tue, 7 May 2002 12:55:09 -0700

38 lines

Re: Productivity Way Up

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 15:05:43 -0500

29 lines

Re: Productivity Way Up

jim <[log in to unmask]>

Tue, 7 May 2002 16:43:56 -0500

74 lines

Re: Productivity Way Up

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 16:43:29 -0500

28 lines

Re: Productivity Way Up

Genny Gibbard <[log in to unmask]>

Tue, 7 May 2002 16:20:49 -0600

103 lines

Re: Productivity Way Up

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 17:43:29 -0500

35 lines

Re: Productivity Way Up

Jack C. Olson <[log in to unmask]>

Wed, 8 May 2002 08:18:08 -0500

33 lines

Re: Productivity Way Up

Earl Moon <[log in to unmask]>

Wed, 8 May 2002 09:24:20 -0500

26 lines

Re: Productivity Way Up

Crepeau, Phil <[log in to unmask]>

Wed, 8 May 2002 11:47:12 -0700

56 lines

Re: Productivity Way Up

Earl Moon <[log in to unmask]>

Wed, 8 May 2002 14:43:25 -0500

40 lines

New Thread

Productivity Way Up - Off topic

Re: Productivity Way Up - Off topic

McVean <[log in to unmask]>

Wed, 8 May 2002 18:24:14 +0100

71 lines

Re: Productivity Way Up - Off topic

Earl Moon <[log in to unmask]>

Wed, 8 May 2002 12:21:20 -0500

26 lines

Re: Productivity Way Up - Off topic

Earl Moon <[log in to unmask]>

Wed, 8 May 2002 13:22:41 -0500

41 lines

New Thread

Proposed lifting of component date code restrictions

Proposed lifting of component date code restrictions

Francois Monette <[log in to unmask]>

Wed, 1 May 2002 09:35:06 -0400

110 lines

Re: Proposed lifting of component date code restrictions

Seth Goodman <[log in to unmask]>

Wed, 1 May 2002 16:30:13 -0500

60 lines

New Thread

PTH Vertical Fill Requirement IPC610 Rev. C

PTH Vertical Fill Requirement IPC610 Rev. C

[log in to unmask]

Thu, 9 May 2002 11:43:48 -0700

41 lines

Re: PTH Vertical Fill Requirement IPC610 Rev. C

Richard Carruth <[log in to unmask]>

Thu, 9 May 2002 16:48:02 -0500

90 lines

Re: PTH Vertical Fill Requirement IPC610 Rev. C

Nancy Trumbull <[log in to unmask]>

Fri, 10 May 2002 07:24:05 -0400

94 lines

Re: PTH Vertical Fill Requirement IPC610 Rev. C

Sauer, Steven T. <[log in to unmask]>

Fri, 10 May 2002 07:53:53 -0400

53 lines

Re: PTH Vertical Fill Requirement IPC610 Rev. C

David Douthit <[log in to unmask]>

Fri, 10 May 2002 05:41:05 -0700

75 lines

Re: PTH Vertical Fill Requirement IPC610 Rev. C

Nancy Trumbull <[log in to unmask]>

Fri, 10 May 2002 14:56:07 -0400

89 lines

Re: PTH Vertical Fill Requirement IPC610 Rev. C

Guy Ramsey <[log in to unmask]>

Fri, 10 May 2002 15:51:39 -0400

286 lines

Re: PTH Vertical Fill Requirement IPC610 Rev. C

Werner Engelmaier <[log in to unmask]>

Fri, 10 May 2002 20:00:45 EDT

36 lines

New Thread

Re column grid arrays

Re column grid arrays

Dave Hillman <[log in to unmask]>

Fri, 31 May 2002 15:05:42 -0500

81 lines

Re: Re column grid arrays

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 15:33:18 -0500

51 lines

New Thread

Re Hole Fill

Re Hole Fill

[log in to unmask]

Mon, 20 May 2002 21:58:17 EDT

54 lines

Re: Re Hole Fill

Werner Engelmaier <[log in to unmask]>

Tue, 21 May 2002 10:51:22 EDT

82 lines

New Thread

ReA610HoleFill

ReA610HoleFill

[log in to unmask]

Sat, 11 May 2002 16:36:24 EDT

42 lines

Re: ReA610HoleFill

Sauer, Steven T. <[log in to unmask]>

Mon, 13 May 2002 08:32:58 -0400

49 lines

Re: ReA610HoleFill

Jack Crawford <[log in to unmask]>

Mon, 13 May 2002 09:43:20 -0500

190 lines

Re: ReA610HoleFill

Mel Parrish <[log in to unmask]>

Mon, 13 May 2002 09:47:17 -0500

104 lines

New Thread

really big boards

really big boards

Guy Ramsey <[log in to unmask]>

Fri, 17 May 2002 07:14:29 -0400

84 lines

Re: really big boards

Marsico, James <[log in to unmask]>

Fri, 17 May 2002 08:46:59 -0400

48 lines

Re: really big boards

Guy Ramsey <[log in to unmask]>

Fri, 17 May 2002 10:30:52 -0400

78 lines

Re: really big boards

Eric Dawson <[log in to unmask]>

Fri, 17 May 2002 15:39:53 +0100

74 lines

Re: really big boards

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Fri, 17 May 2002 16:08:14 +0100

118 lines

Re: really big boards

Barmuta, Mike <[log in to unmask]>

Fri, 17 May 2002 09:40:11 -0700

74 lines

Re: really big boards

Brummer Chuck <[log in to unmask]>

Fri, 17 May 2002 09:40:04 -0700

142 lines

Re: really big boards

Guy Ramsey <[log in to unmask]>

Fri, 17 May 2002 15:13:11 -0400

189 lines

Re: really big boards

Dwight Mattix <[log in to unmask]>

Fri, 17 May 2002 12:11:25 -0700

80 lines

Re: really big boards

Alain Savard <[log in to unmask]>

Fri, 17 May 2002 15:21:51 -0400

83 lines

Re: really big boards

Geoff Layhe <[log in to unmask]>

Mon, 20 May 2002 09:12:38 +0100

190 lines

Re: really big boards

Mair, Christian <[log in to unmask]>

Wed, 22 May 2002 11:37:11 +0200

92 lines

Re: really big boards

Dougal Stewart <[log in to unmask]>

Wed, 22 May 2002 16:36:33 +0100

140 lines

Re: really big boards

Atkinson, Neil <[log in to unmask]>

Fri, 24 May 2002 07:43:44 +0100

543 lines

Re: really big boards

Roland Jaquet <[log in to unmask]>

Fri, 24 May 2002 21:55:44 +0200

371 lines

New Thread

really big boards - all humor, no tech value

Re: really big boards - all humor, no tech value

Dave Hillman <[log in to unmask]>

Fri, 17 May 2002 13:07:04 -0500

120 lines

Re: really big boards - all humor, no tech value

Guy Ramsey <[log in to unmask]>

Fri, 17 May 2002 17:04:11 -0400

156 lines

Re: really big boards - all humor, no tech value

Ed Popielarski <[log in to unmask]>

Sat, 18 May 2002 08:01:17 -0700

138 lines

Re: really big boards - all humor, no tech value

Randy Bock Sr. <[log in to unmask]>

Sat, 18 May 2002 11:58:06 -0400

180 lines

New Thread

Recommended solder paste for a 6 layer double-sided board with CSP & BGA packages

Recommended solder paste for a 6 layer double-sided board with CSP & BGA packages

Francis Sun <[log in to unmask]>

Mon, 13 May 2002 10:12:36 -0400

34 lines

New Thread

Reflow Oven Recommendations

Reflow Oven Recommendations

Mcmaster, Michael <[log in to unmask]>

Thu, 30 May 2002 16:37:11 -0700

70 lines

Re: Reflow Oven Recommendations

Phil Kinner <[log in to unmask]>

Fri, 31 May 2002 09:08:15 +0100

174 lines

New Thread

Repair/Mod pads

Repair/Mod pads

[log in to unmask]

Tue, 21 May 2002 20:26:00 +0800

39 lines

Re: Repair/Mod pads

Linda Langley <[log in to unmask]>

Tue, 21 May 2002 09:02:37 -0400

73 lines

Re: Repair/Mod pads

Guy Ramsey <[log in to unmask]>

Tue, 21 May 2002 10:43:43 -0400

74 lines

Re: Repair/Mod pads

Jeff Ferry <[log in to unmask]>

Tue, 21 May 2002 10:49:24 -0400

90 lines

Re: Repair/Mod pads

Neda Thrash <[log in to unmask]>

Tue, 21 May 2002 10:15:20 -0500

71 lines

New Thread

RePalladium Leads

RePalladium Leads

[log in to unmask]

Thu, 9 May 2002 09:41:15 EDT

31 lines

Re: RePalladium Leads

Alex Krstic <[log in to unmask]>

Thu, 9 May 2002 13:06:00 -0600

64 lines

New Thread

Restoring solderability

Restoring solderability

Paul Truit <[log in to unmask]>

Wed, 15 May 2002 13:41:25 -0400

41 lines

Re: Restoring solderability

Guy Ramsey <[log in to unmask]>

Wed, 15 May 2002 15:33:30 -0400

81 lines

Re: Restoring solderability

David Fish <[log in to unmask]>

Wed, 15 May 2002 15:32:40 -0700

72 lines

Re: Restoring solderability

Bloomquist, Ken <[log in to unmask]>

Wed, 15 May 2002 13:58:22 -0700

69 lines

Re: Restoring solderability

Guy Ramsey <[log in to unmask]>

Thu, 16 May 2002 07:29:06 -0400

255 lines

Re: Restoring solderability

Dave Hillman <[log in to unmask]>

Thu, 16 May 2002 10:13:55 -0500

100 lines

New Thread

resume post

resume post

William Sullivan <[log in to unmask]>

Thu, 23 May 2002 07:22:38 -0700

1012 lines

New Thread

Rod Smith/Endicott/IBM is out of the office.

Rod Smith/Endicott/IBM is out of the office.

Rod Smith <[log in to unmask]>

Fri, 31 May 2002 11:11:40 -0400

24 lines

New Thread

safety committee

safety committee

[log in to unmask]

Thu, 2 May 2002 13:11:23 -0500

33 lines

Re: safety committee

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 14:55:13 -0400

66 lines

Re: safety committee

Dan R. Johnson <[log in to unmask]>

Thu, 2 May 2002 13:14:47 -0700

26 lines

Re: safety committee

Hinners Hans M Civ WRALC/LUGE <[log in to unmask]>

Fri, 3 May 2002 21:48:32 +0100

79 lines

New Thread

Sanmina HDI

Re: Sanmina HDI

Jana Carraway <[log in to unmask]>

Mon, 6 May 2002 15:50:27 -0700

73 lines

New Thread

Sanminaized

Sanminaized

Earl Moon <[log in to unmask]>

Mon, 6 May 2002 14:00:42 -0500

83 lines

New Thread

Shear stress on laser vias

Shear stress on laser vias

Franck, George <[log in to unmask]>

Thu, 2 May 2002 10:47:33 -0400

40 lines

New Thread

Side fillet requirements

Side fillet requirements

Frank Kimmey <[log in to unmask]>

Mon, 20 May 2002 15:16:53 -0700

35 lines

Re: Side fillet requirements

[log in to unmask]

Tue, 21 May 2002 13:41:17 +0800

83 lines

Re: Side fillet requirements

Mel Parrish <[log in to unmask]>

Tue, 21 May 2002 07:36:56 -0500

132 lines

Re: Side fillet requirements

Guy Ramsey <[log in to unmask]>

Tue, 21 May 2002 08:57:56 -0400

54 lines

Re: Side fillet requirements

Frank Kimmey <[log in to unmask]>

Tue, 21 May 2002 08:25:32 -0700

106 lines

Re: Side fillet requirements

Greg Scott <[log in to unmask]>

Tue, 21 May 2002 09:55:57 -0700

143 lines

Re: Side fillet requirements

David Ricketts <[log in to unmask]>

Tue, 21 May 2002 11:22:20 -0700

72 lines

Re: Side fillet requirements

Sauer, Steven T. <[log in to unmask]>

Wed, 22 May 2002 08:19:57 -0400

48 lines

Re: Side fillet requirements

Mel Parrish <[log in to unmask]>

Wed, 22 May 2002 11:00:55 -0500

90 lines

New Thread

Solder after reflow on Gold Immersion finish

Solder after reflow on Gold Immersion finish

Brooks,Bill <[log in to unmask]>

Thu, 9 May 2002 12:09:54 -0700

100 lines

Re: Solder after reflow on Gold Immersion finish

Dave Hillman <[log in to unmask]>

Fri, 10 May 2002 14:33:21 -0500

159 lines

Re: Solder after reflow on Gold Immersion finish

David Fish <[log in to unmask]>

Sun, 12 May 2002 09:17:30 -0700

211 lines

New Thread

Solder Defect Rates

Re: Solder Defect Rates

Hogg, Blair K. <[log in to unmask]>

Wed, 29 May 2002 15:43:09 -0400

65 lines

New Thread

Solder-UBM Separation

Solder-UBM Separation

[log in to unmask]

Thu, 16 May 2002 10:39:09 +0800

41 lines

Re: Solder-UBM Separation

[log in to unmask]

Thu, 16 May 2002 12:36:37 +0800

107 lines

Re: Solder-UBM Separation

Mike Fenner <[log in to unmask]>

Fri, 17 May 2002 09:08:57 +0100

91 lines

New Thread

soldermask ring v. full coat for BGA design

soldermask ring v. full coat for BGA design

Ochenas, Tom <[log in to unmask]>

Thu, 30 May 2002 16:57:49 -0700

180 lines

Re: soldermask ring v. full coat for BGA design

[log in to unmask]

Thu, 30 May 2002 20:57:48 EDT

55 lines

Re: soldermask ring v. full coat for BGA design

Ochenas, Tom <[log in to unmask]>

Fri, 31 May 2002 11:00:05 -0700

131 lines

Re: soldermask ring v. full coat for BGA design

Eddie Rocha <[log in to unmask]>

Fri, 31 May 2002 13:27:54 -0700

31 lines

Re: soldermask ring v. full coat for BGA design

Earl Moon <[log in to unmask]>

Fri, 31 May 2002 15:37:10 -0500

26 lines

New Thread

Some Advice on PCB tols required

Some Advice on PCB tols required

Eric Christison <[log in to unmask]>

Thu, 2 May 2002 13:18:41 +0100

48 lines

Re: Some Advice on PCB tols required

Guy Ramsey <[log in to unmask]>

Thu, 2 May 2002 14:02:21 -0400

92 lines

New Thread

Surrogate Post - Multiple Choice Question

Surrogate Post - Multiple Choice Question

Houston, Terri <[log in to unmask]>

Fri, 3 May 2002 12:27:26 -0600

37 lines

New Thread

SV: [TN] Recommended solder paste for a 6 layer double-sided board with CSP & BGA packages

SV: [TN] Recommended solder paste for a 6 layer double-sided board with CSP & BGA packages

Björn Kullman <[log in to unmask]>

Tue, 14 May 2002 08:31:25 +0200

93 lines

New Thread

SV: [TN] Vapor phase

SV: [TN] Vapor phase

Björn Kullman <[log in to unmask]>

Mon, 27 May 2002 08:57:25 +0200

82 lines

Re: SV: [TN] Vapor phase

Brian Ellis <[log in to unmask]>

Mon, 27 May 2002 12:10:38 +0300

101 lines

Re: SV: [TN] Vapor phase

Graham Naisbitt <[log in to unmask]>

Mon, 27 May 2002 10:36:46 +0100

182 lines

Re: SV: [TN] Vapor phase

Mike Fenner <[log in to unmask]>

Mon, 27 May 2002 14:20:14 +0100

119 lines

Re: SV: [TN] Vapor phase

Graham Naisbitt <[log in to unmask]>

Mon, 27 May 2002 17:05:14 +0100

191 lines

Re: SV: [TN] Vapor phase

Mike Fenner <[log in to unmask]>

Tue, 28 May 2002 16:59:39 +0100

111 lines

New Thread

Tape & Reel Size for 0402 Components

Tape & Reel Size for 0402 Components

Becerra Alejandro <[log in to unmask]>

Thu, 16 May 2002 13:00:35 -0500

77 lines

Re: Tape & Reel Size for 0402 Components

Krug, Dick <[log in to unmask]>

Thu, 16 May 2002 17:00:18 -0400

85 lines

New Thread

TechNet Cops are NOT on vacation

TechNet Cops are NOT on vacation

Jack Crawford <[log in to unmask]>

Fri, 31 May 2002 16:44:13 -0500

70 lines

New Thread

TechNet Digest - 12 May 2002 to 13 May 2002 (#2002-109)

Re: TechNet Digest - 12 May 2002 to 13 May 2002 (#2002-109)

Brock Hunter <[log in to unmask]>

Tue, 14 May 2002 02:25:06 -0400

36 lines

Re: TechNet Digest - 12 May 2002 to 13 May 2002 (#2002-109)

Jim Wertin <[log in to unmask]>

Tue, 14 May 2002 11:14:47 -0700

834 lines

New Thread

testing via holes

testing via holes

Kris Keating <[log in to unmask]>

Fri, 17 May 2002 10:07:34 -0400

25 lines

Re: testing via holes

Dwight Mattix <[log in to unmask]>

Fri, 17 May 2002 12:06:13 -0700

50 lines

Re: testing via holes

Werner Engelmaier <[log in to unmask]>

Sun, 19 May 2002 20:42:25 EDT

38 lines

Re: testing via holes

Eric Dawson <[log in to unmask]>

Mon, 20 May 2002 08:19:37 +0100

33 lines

New Thread

Texas Designer's Learning Symposium - May 20 - 25, 2002

Texas Designer's Learning Symposium - May 20 - 25, 2002

Barbara Burcham <[log in to unmask]>

Wed, 8 May 2002 13:26:08 -0500

74 lines

New Thread

The Best Opportunity in Texas!!!

The Best Opportunity in Texas!!!

Stephannie Caliendo <[log in to unmask]>

Thu, 16 May 2002 20:08:07 -0500

69 lines

New Thread

Thickness of finish

Thickness of finish

Bev Christian <[log in to unmask]>

Wed, 1 May 2002 17:15:04 -0400

56 lines

New Thread

Tinning SMD diodes

Tinning SMD diodes

Robert Meston <[log in to unmask]>

Tue, 7 May 2002 07:37:11 -0500

37 lines

Re: Tinning SMD diodes

Marsico, James <[log in to unmask]>

Tue, 7 May 2002 10:41:12 -0400

84 lines

Re: Tinning SMD diodes

Wenger, George M. <[log in to unmask]>

Tue, 7 May 2002 12:35:34 -0400

132 lines

New Thread

TM650

TM650

tony steinke <[log in to unmask]>

Thu, 23 May 2002 16:43:36 -0700

66 lines

Re: TM650

Brian McCrory <[log in to unmask]>

Thu, 23 May 2002 16:32:38 -0700

85 lines

New Thread

Trough hole soldering

Trough hole soldering

Marki Sasportas <[log in to unmask]>

Sun, 19 May 2002 16:59:52 +0200

26 lines

Re: Trough hole soldering

Rob Legg <[log in to unmask]>

Mon, 20 May 2002 00:38:14 -0400

55 lines

New Thread

TypeUR conformal coatings

TypeUR conformal coatings

Linda Woody <[log in to unmask]>

Wed, 22 May 2002 14:24:06 -0500

31 lines

Re: TypeUR conformal coatings

Chris Almeras <[log in to unmask]>

Wed, 22 May 2002 15:18:07 -0500

74 lines

Re: TypeUR conformal coatings

Phil Kinner <[log in to unmask]>

Thu, 23 May 2002 15:20:41 +0100

232 lines

New Thread

V-groove 031 thick PCB

V-groove 031 thick PCB

[log in to unmask]

Mon, 6 May 2002 10:08:19 -0700

34 lines

New Thread

Vacuum ???

Vacuum ???

Rudy Sedlak <[log in to unmask]>

Wed, 1 May 2002 08:52:35 EDT

58 lines

New Thread

vacuum seal and MSD

vacuum seal and MSD

Earl Moon <[log in to unmask]>

Wed, 1 May 2002 18:29:23 -0500

38 lines

Re: vacuum seal and MSD

[log in to unmask]

Wed, 1 May 2002 20:39:32 EDT

39 lines

Vacuum Seal and MSD

Francois Monette <[log in to unmask]>

Thu, 2 May 2002 09:50:22 -0400

113 lines

Re: Vacuum Seal and MSD

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 10:46:45 -0400

172 lines

New Thread

Vacuum Sealing

Vacuum Sealing

bbarr <[log in to unmask]>

Wed, 1 May 2002 11:05:46 -0400

40 lines

Re: Vacuum Sealing

Creswick, Steven <[log in to unmask]>

Wed, 1 May 2002 14:26:01 -0400

92 lines

New Thread

Vacuum sealing equipment

Vacuum sealing equipment

Francois Monette <[log in to unmask]>

Thu, 2 May 2002 10:27:39 -0400

71 lines

Re: Vacuum sealing equipment

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 11:36:06 -0400

112 lines

Re: Vacuum sealing equipment

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 11:44:23 -0400

104 lines

New Thread

Vacuum sealing equipment...

Re: Vacuum sealing equipment...

Brian Ellis <[log in to unmask]>

Wed, 1 May 2002 10:18:32 +0300

70 lines

Re: Vacuum sealing equipment...

Charles Caswell <[log in to unmask]>

Wed, 1 May 2002 07:09:14 -0500

85 lines

Re: Vacuum sealing equipment...

Charles Caswell <[log in to unmask]>

Wed, 1 May 2002 07:10:43 -0500

119 lines

Re: Vacuum sealing equipment...

[log in to unmask]

Wed, 1 May 2002 08:39:44 EDT

66 lines

Re: Vacuum sealing equipment...

James TerVeen <[log in to unmask]>

Wed, 1 May 2002 09:42:46 -0400

68 lines

Vacuum sealing equipment...

Francois Monette <[log in to unmask]>

Wed, 1 May 2002 09:53:21 -0400

73 lines

Re: Vacuum sealing equipment...

Earl Moon <[log in to unmask]>

Wed, 1 May 2002 09:02:53 -0500

28 lines

Re: Vacuum sealing equipment...

Tempea, Ioan <[log in to unmask]>

Wed, 1 May 2002 10:50:34 -0400

135 lines

Re: Vacuum sealing equipment...

Dan R. Johnson <[log in to unmask]>

Wed, 1 May 2002 08:03:23 -0700

29 lines

Re: Vacuum sealing equipment...

D.Terstegge <[log in to unmask]>

Thu, 2 May 2002 18:37:00 +0200

257 lines

Re: Vacuum sealing equipment...

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 11:47:18 -0500

28 lines

New Thread

Vapor phase

Vapor phase

Stefano Riccardi <[log in to unmask]>

Fri, 24 May 2002 09:31:50 +0200

70 lines

Re: Vapor phase

Brian Ellis <[log in to unmask]>

Fri, 24 May 2002 14:56:50 +0300

48 lines

Re: Vapor phase

Mike Fenner <[log in to unmask]>

Fri, 24 May 2002 17:50:25 +0100

91 lines

Re: Vapor phase

rgrant <[log in to unmask]>

Fri, 24 May 2002 11:55:26 -0600

89 lines

Re: Vapor phase

Brian Ellis <[log in to unmask]>

Sat, 25 May 2002 09:06:27 +0300

48 lines

Re: Vapor phase

Stefano Riccardi <[log in to unmask]>

Mon, 27 May 2002 08:31:58 +0200

148 lines

Re: Vapor phase

Brian Ellis <[log in to unmask]>

Mon, 27 May 2002 12:12:07 +0300

28 lines

Re: Vapor phase

rgrant <[log in to unmask]>

Tue, 28 May 2002 12:52:56 -0600

177 lines

Re: Vapor phase

Earl Moon <[log in to unmask]>

Tue, 28 May 2002 14:22:10 -0500

22 lines

Re: Vapor phase

[log in to unmask]

Tue, 28 May 2002 16:06:12 EDT

51 lines

Re: Vapor phase

Earl Moon <[log in to unmask]>

Tue, 28 May 2002 15:05:35 -0500

30 lines

Re: Vapor phase

Graham Naisbitt <[log in to unmask]>

Tue, 28 May 2002 22:50:41 +0100

99 lines

Re: Vapor phase

Earl Moon <[log in to unmask]>

Tue, 28 May 2002 18:07:02 -0500

33 lines

Re: Vapor phase

[log in to unmask]

Wed, 29 May 2002 10:29:29 -0400

25 lines

New Thread

Via Capacitance

Via Capacitance

[log in to unmask]

Mon, 20 May 2002 11:57:38 +0200

32 lines

Re: Via Capacitance

Seth Goodman <[log in to unmask]>

Mon, 20 May 2002 17:43:02 -0500

83 lines

New Thread

Via Plug

Re: Via Plug

Dwight Mattix <[log in to unmask]>

Thu, 2 May 2002 10:55:02 -0700

97 lines

New Thread

Vias-in-pads

Vias-in-pads

Denis Lefebvre <[log in to unmask]>

Tue, 7 May 2002 12:15:40 -0700

94 lines

Re: Vias-in-pads

Earl Moon <[log in to unmask]>

Tue, 7 May 2002 14:25:34 -0500

36 lines

Re: Vias-in-pads

ryan <[log in to unmask]>

Wed, 24 Apr 2002 19:52:21 -0400

350 lines

Re: Vias-in-pads

Bob Perkins <[log in to unmask]>

Fri, 10 May 2002 08:27:12 -0700

340 lines

New Thread

VIRUS WARNNING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

VIRUS WARNNING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Bill Dworak <[log in to unmask]>

Mon, 6 May 2002 00:06:36 -0700

134 lines

Re: VIRUS WARNNING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Randy Bock Sr. <[log in to unmask]>

Mon, 6 May 2002 07:36:03 -0400

105 lines

New Thread

Voids in BGA/CSP Balls

Voids in BGA/CSP Balls

Zweigart, Siegmund <[log in to unmask]>

Wed, 29 May 2002 17:43:13 +0200

28 lines

New Thread

Voids in fine-pitch BGAs after reflow

Voids in fine-pitch BGAs after reflow

Håkan Törnqvist (EMW) <[log in to unmask]>

Thu, 16 May 2002 11:10:18 +0200

36 lines

Re: Voids in fine-pitch BGAs after reflow

Guy Ramsey <[log in to unmask]>

Fri, 17 May 2002 07:42:39 -0400

167 lines

Re: Voids in fine-pitch BGAs after reflow

Werner Engelmaier <[log in to unmask]>

Fri, 17 May 2002 19:33:14 EDT

41 lines

New Thread

Voids on 0.75 mm micro-BGA

Voids on 0.75 mm micro-BGA

[log in to unmask]

Wed, 8 May 2002 10:14:39 -0700

40 lines

Re: Voids on 0.75 mm micro-BGA

Earl Moon <[log in to unmask]>

Wed, 8 May 2002 12:47:23 -0500

29 lines

New Thread

Wave solder re-runs/re-work

Wave solder re-runs/re-work

David White <[log in to unmask]>

Thu, 2 May 2002 11:14:20 -0400

29 lines

Re: Wave solder re-runs/re-work

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 12:16:13 -0500

28 lines

Re: Wave solder re-runs/re-work

[log in to unmask]

Fri, 3 May 2002 08:05:25 +0800

107 lines

Re: Wave solder re-runs/re-work

David Douthit <[log in to unmask]>

Thu, 2 May 2002 22:08:04 -0700

118 lines

Re: Wave solder re-runs/re-work

[log in to unmask]

Fri, 3 May 2002 23:58:21 EDT

24 lines

New Thread

Wave solder re-runs/re-work exposed copper

Re: Wave solder re-runs/re-work exposed copper

Guy Ramsey <[log in to unmask]>

Fri, 3 May 2002 07:10:54 -0400

157 lines

Re: Wave solder re-runs/re-work exposed copper

Kathy Kuhlow <[log in to unmask]>

Fri, 3 May 2002 09:09:48 -0500

87 lines

Re: Wave solder re-runs/re-work exposed copper

Mel Parrish <[log in to unmask]>

Fri, 3 May 2002 11:29:33 -0500

203 lines

Re: Wave solder re-runs/re-work exposed copper

[log in to unmask]

Mon, 6 May 2002 13:39:17 +0800

206 lines

Re: Wave solder re-runs/re-work exposed copper

Guy Ramsey <[log in to unmask]>

Mon, 6 May 2002 08:51:07 -0400

196 lines

New Thread

[TN} Vacuum Sealing...

[TN} Vacuum Sealing...

[log in to unmask]

Wed, 1 May 2002 22:52:44 EDT

27 lines

Re: [TN} Vacuum Sealing...

Earl Moon <[log in to unmask]>

Thu, 2 May 2002 06:36:12 -0400

76 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager