Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 17 May 2002 19:33:14 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Hakan,
No, there are no theories indicating that one can tolerate higher percentage
as the balls get smaller. There is also very little in data. The data that do
exist indicate that voids result in a temporary localized retardation of
crack propagation, but no data exist to my knowledge that
the info in IPC-7095:
Class I: 60% of dia = 36% of area
Class II: 45% of dia = 20.25% of area
Class III: 30% of dia = 9% of area
is based on any real experience.
Werner Engelmaier
Engelmaier Associates, L.C.
Electronic Packaging, Interconnection and Reliability Consulting
7 Jasmine Run
Ormond Beach, FL 32174 USA
Phone: 386-437-8747, Fax: 386-437-8737
E-mail: [log in to unmask], Website: www.engelmaier.com
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|