TECHNET Archives

November 1998

TechNet@IPC.ORG

Options: Hide Table of Contents

ÄTNÅ HASL (2 Messages)
(FAB)Pad lift & Cracking (2 Messages)
0.004" trace/space technology (4 Messages)
11,5 oz Double Sided FR4 (3 Messages)
1mm PBGA Assembly (3 Messages)
2220 ceramic cap failure (3 Messages)
3 legged transistors (4 Messages)
: Actel CQ132 (2 Messages)
: Cause and Corrective Action (1 Message)
: Printer printing accuracy and repeatability. (2 Messages)
: Testing of OCC board. (1 Message)
<No subject> (16 Messages)
Accurately Positioning Components on PWBs (2 Messages)
Alpha wire FIT-130 product line. (1 Message)
Annular Ring ! (4 Messages)
Annular Ring!- May we have an arbiter please...Paging Mr. ... (2 Messages)
Annular Ring!- May we have an arbiter please...Paging Mr. Coyle! (1 Message)
Assembly : temp. profile for glue cure (1 Message)
Assembly: temp. profile for glue cure (1 Message)
ASSY : Wavesoldering : Dross formation (4 Messages)
Assy: Contact CS-400E Efficiency (4 Messages)
Assy: Low quantity Press-fit connector tip... (4 Messages)
ASSY: Modified ETFE Insulation (1 Message)
Assy: QFP leadframe tin-lead finish (10 Messages)
Assy: Solder-ball FAQ (1 Message)
Assy: stencil cleaning liquid temps (2 Messages)
assy: tin at $2.48/lb (1 Message)
assy: wave solder fingers (2 Messages)
ASSY:mixing of high and low-temp PbSn alloys (1 Message)
Attaching Al heatsink to Si die (7 Messages)
auto dosing systems (2 Messages)
Auto Insertion of Triacs (1 Message)
AVX Multiguard and Current Leakage Issues (1 Message)
AW: [TN] Electroless Nickel for Aluminum (2 Messages)
Backfill Recommendation (2 Messages)
Bare Board imperfections (5 Messages)
Bare Board imperfections -Reply (1 Message)
Bare Die Supplier (1 Message)
Bareboard imperfections (1 Message)
Bend/flex (4 Messages)
BGA rework question (3 Messages)
BGA Shelf Life (1 Message)
BGA X-ray (1 Message)
BGA X-ray inspection (1 Message)
Blind vias (1 Message)
Board Assembly Quoting (1 Message)
card edge connectors (1 Message)
CEM 1 vs G10 (3 Messages)
Chemring (3 Messages)
Cleaning Solder Pallets (2 Messages)
Cleaning Un-cured SMA (1 Message)
COG mounting techniques (1 Message)
company address (3 Messages)
Conductive Carbon Ink / Silver Polymer Thick Film on Card Edge Contacts (2 Messages)
Conformal Coating Needed?? (2 Messages)
Conformal Coatings (2 Messages)
conformal coating[SHEEN CUP 401/4 specification] (3 Messages)
Copper Plating (7 Messages)
Copper plating & Copper thickness (9 Messages)
copper plating and anode area (1 Message)
Copper plating Anode ratio (2 Messages)
Corrrection Annular Ring ! (1 Message)
Counter Sunk Screws to mount PCBs (3 Messages)
Covering Vias (2 Messages)
Daisy chain (3 Messages)
DEK GSX265 PROFLOW HEAD UPDATE (1 Message)
DES: Pressfit Connectors & White Tin (2 Messages)
dewetting (1 Message)
DFM for SMT Spec. (2 Messages)
Direct Bond Copper (1 Message)
Electroless Nickel for Aluminum (1 Message)
electroless pth (2 Messages)
Electroplating and Surface Finishing Society National Convention (1 Message)
ENC: [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS (1 Message)
Epoxy Stencil Design? (3 Messages)
Epoxy Stencil Design? -Reply (1 Message)
FAB: Cupric Chloride etching (7 Messages)
Failure of Rigid Flex (1 Message)
Finding the man who helped me !(+/-3mill) (1 Message)
FINE LINE COPPER PLATING (8 Messages)
Fine pitch (1 Message)
Fine Pitch info (2 Messages)
fixing exposed copper/traces (3 Messages)
Flex to FR4 with hot bar (1 Message)
Flexible Circuits (3 Messages)
Flexible Conformal Coating (1 Message)
Flying Grid Bare Board Testers (1 Message)
FOR YOUR HELP (3 Messages)
FR4 properties (3 Messages)
Fume Extraction for Manual Soldering (2 Messages)
GenCAM (1 Message)
Gold Finger Stains (4 Messages)
Gold Finger Stains & Contact Resistance. (1 Message)
Gold mask etchant (3 Messages)
HASL (12 Messages)
Heat Sinks on PWBs (3 Messages)
Heated ET (5 Messages)
Helium leak rate measurements. (1 Message)
Help locating PCB drill bits (1 Message)
Help needed on PBGA Wire Bonding (1 Message)
help! -- how to meet the +/-3mil(0.076mm)routing tolerance (1 Message)
hole plug source (4 Messages)
Hot Bar Production Methods (2 Messages)
IL Clearance Calculation (1 Message)
Immersion Gold SMT PWB (1 Message)
Immesion Tin (The other White meat) (2 Messages)
Info on Nelco-6 laminate material (2 Messages)
Inks used for Test Stamps on PCBs (2 Messages)
Intel uBGA Flash, Bottom Side SMT? (1 Message)
Intermittent Dewetting (2 Messages)
IPC 4101 (2 Messages)
IPC Designers Council Elections (1 Message)
IPC News Release: IPC Creates Equipment Exchange Website (1 Message)
IPC News Release: IPC/SMEMA Council to Intoduce new Trad... (1 Message)
IPC News Release: IPC/SMEMA Council to Intoduce new Trade ... (1 Message)
IPC News Release: IPC/SMEMA Council to Intoduce new Trade Show (2 Messages)
IPC News Release: IPC/SMEMA Council to Intoduce newTrade ... (1 Message)
Jay DeKing (1 Message)
KODAK 960 FILM PROCESSOR (1 Message)
Laminate (2 Messages)
Layers Count vs Thickness (1 Message)
Lead bending. (2 Messages)
Lead-Free legislation (2 Messages)
life time of Ni/Au contacts? (2 Messages)
Lines Between Pins (1 Message)
Logic Device, drop test failure (3 Messages)
Looking for dummy ceramic QFP parts (4 Messages)
Marking Pen (1 Message)
Marking systems (2 Messages)
mcm designers (1 Message)
measuring Shear Force (1 Message)
Melting point of 90/10 and 95/5 solder (5 Messages)
Microscopes & Cross Sectioning equipment for HDIS (2 Messages)
MIL-1235 - Replaced ?? (2 Messages)
MIL-C-28809 (3 Messages)
modulus & Poisson's ratio (2 Messages)
Moisture sensitive (2 Messages)
Moisture Sensitive Devices (4 Messages)
mounting SOIC using Chipshooter (3 Messages)
neckdown (4 Messages)
Need a Number - Solder Station One (3 Messages)
Need help (2 Messages)
Need Kleenox "P" MSDS and information (2 Messages)
Need PCB Designer in Houston (2 Messages)
need test lab for no clean process (3 Messages)
Ni/Pd/Au Lead Finish (2 Messages)
No SUBJECT e-mail (1 Message)
non wetting agent for epoxy resin (1 Message)
OSP Dwell between thermal processes (1 Message)
Overcoat Pen (1 Message)
P and B content in electroless nickel (1 Message)
PANEL AGITATION IN DEEP NICKEL/GOLD PLATING. (1 Message)
Parylene Conformal Coating (2 Messages)
Pattern Copper Plating (3 Messages)
Pb in ceramic components (4 Messages)
PCB ASSEMBLY COST ANALYSIS (1 Message)
PCB FAB SHOPS WITH BELLCORE TR-NWT-000078 CERTIFICATION (2 Messages)
PCBA Routing Survey (3 Messages)
Problem in Gold Plating (6 Messages)
Problem in Gold Plating -Reply (1 Message)
Process courses (2 Messages)
Protective laminate (1 Message)
Pulse Plating - Copper (1 Message)
Pulse Plating Versus DC Plating (1 Message)
Pulse Plating: Cu and PCB (1 Message)
Q on Ion Chromatography (1 Message)
QFP leadframe tin-lead finish (4 Messages)
Quoting Board Builds (1 Message)
Quoting Board Builds -Reply (1 Message)
Re Cause/Effect (1 Message)
Re Gold (1 Message)
Re Repair Limits (1 Message)
Re SolderBalls (7 Messages)
RE True Position and Registration on Fab (1 Message)
ReCard Edge Connectors (1 Message)
Recent Discussion on Ni/Pd Finished ICs (1 Message)
ReEnvironControl (1 Message)
Reflow ovens (1 Message)
Removing wet SMT epoxy from flex circuits.... (2 Messages)
Repair Limits (2 Messages)
Resource needed for Palladium/Nickel Service (2 Messages)
rogers (4 Messages)
Scoring PCAs (2 Messages)
Screenprint problems (3 Messages)
Seed for Cu plating in high freq. (1 Message)
Selective Soldering (3 Messages)
Selective Soldering Machine (2 Messages)
shear testers (2 Messages)
Shelf life of HASL fabs. (2 Messages)
SIGNOFF * (1 Message)
Silver Migration (5 Messages)
Simple Component Source. (2 Messages)
SMEMA Printer and SMPI Conveyors (2 Messages)
SMT Glue (2 Messages)
SMT solder balls (1 Message)
SMT ZENER (2 Messages)
SMTA Silicon Valley mtg DFM & ESMT Design for Manuf (1 Message)
Solder balls on chip components (3 Messages)
solder comparisons (1 Message)
Solder mask Dimple Plates (1 Message)
Solder Mixing (1 Message)
Solder on goldfinger (1 Message)
solder paste inquery (1 Message)
Solder paste inspection (1 Message)
Solder Paste???? (2 Messages)
solder resist between solder land to prevent solder brid ging (1 Message)
solder resist between solder land to prevent solder bridging (1 Message)
Solderability Head Scratcher (2 Messages)
Soldering Palladium plated leads (1 Message)
Soldering to Gold (4 Messages)
Soldermask adhesion over tin/lead (2 Messages)
Soldermask adhesion over tin/lead -Reply (1 Message)
Soldermask Breakdown in Humidity Chamber (2 Messages)
SOLDERMASK PLUGGED VIAS (1 Message)
Soldermask surface prep (1 Message)
SPC (5 Messages)
Spec ref for lifted pad after assy (3 Messages)
Specctra router Question (1 Message)
Specification (1 Message)
SRT (3 Messages)
Standards (1 Message)
Stripping Enamel covered wires (2 Messages)
Subj: Re: [TN] SMT ZENER (3 Messages)
Subscribe (1 Message)
Syracuse Area DC Chapter (1 Message)
Temp & Humidity in SMT plant. (1 Message)
Temp Profiling (3 Messages)
Test message - please disregard (1 Message)
TEST: Flying "Grid", not "Probe" (1 Message)
Thermal Resistance Testing labs (1 Message)
THERMOPLASTIC RELIABILITY (5 Messages)
Through hole vs SMT (1 Message)
Tin Oxide (8 Messages)
Tin/Lead Solder Coating Minimum Thickness Requirements (11 Messages)
Touch Up Pen's (2 Messages)
True Position and Registration on Fab (3 Messages)
Unclad FR4 Laminate? (1 Message)
UV Cure Touchup (1 Message)
Via holes on SMD pads? (4 Messages)
Vision Systems for inspection (3 Messages)
Visual Inspection of Misprinted boards after cleaning (2 Messages)
wage and rates for QA managers (2 Messages)
Wanted: Motorola BGA (1 Message)
wash mashine noise on assembly floor (4 Messages)
Wave Solder Fixtures (9 Messages)
Weird Wave Soldering Defect... (7 Messages)
Wet lamination (1 Message)
What happens when polarising occurs (1 Message)
Wierd Wavesoldering defect (1 Message)
Will insufficient solder cause high loss (1 Message)
Working Environment Controls (1 Message)
your mail (1 Message)
your warning (4 Messages)
[Fwd: Solder-ball] (3 Messages)
[TN] Annular Ring ! (1 Message)
[TN] Copper plating & Copper thickness (1 Message)
[TN] Intermittent Dewetting (1 Message)
[TN] Moisture Sensitive Devices (1 Message)
[TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS (1 Message)
[TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS (2 Messages)
[TN] Soldering to Gold (1 Message)
[TN] Temp Profiling (1 Message)
[TN] True Position and Registration on Fab (1 Message)
[TN] Weird Wave Soldering Defect... (1 Message)
[TN] [Fwd: Solder-ball] (1 Message)

Subject Sorted by Subject, Chronologically

From

Date

New Thread ÄTNÅ HASL
<>
Mon, 30 Nov 1998 09:20:10 -0600
Tegehall Per-Erik
Mon, 30 Nov 1998 09:36:15 +0100
New Thread (FAB)Pad lift & Cracking
Robert Welch
Fri, 20 Nov 1998 10:12:03 -0500
Colin
Fri, 20 Nov 1998 04:04:02 -0600
New Thread 0.004" trace/space technology
<>
Tue, 17 Nov 1998 13:06:16 -0600
Timothy A. Estes
Tue, 17 Nov 1998 11:36:01 -0700
<>
Tue, 17 Nov 1998 10:29:22 -0600
Susan Harrington
Tue, 17 Nov 1998 08:58:27 -0600
New Thread 11,5 oz Double Sided FR4
<Rashesh Patel>
Wed, 4 Nov 1998 15:56:34 EST
<>
Wed, 4 Nov 1998 08:55:17 -0600
Neil Atkinson
Wed, 4 Nov 1998 07:43:17 -0000
New Thread 1mm PBGA Assembly
Jindra, Larry
Mon, 16 Nov 1998 14:11:42 -0800
Bill Davis
Mon, 16 Nov 1998 08:30:52 -0800
Yves Trudell
Fri, 13 Nov 1998 12:20:03 -0500
New Thread 2220 ceramic cap failure
Bill Davis
Tue, 3 Nov 1998 14:02:02 -0800
Paul Klasek
Wed, 4 Nov 1998 08:40:49 +1100
Ian Squires
Tue, 3 Nov 1998 10:34:54 PST
New Thread 3 legged transistors
Gary Camac
Mon, 9 Nov 1998 10:35:44 -0600
Ryan Jennens
Mon, 9 Nov 1998 11:42:06 -0500
Mark Austin
Mon, 9 Nov 1998 16:44:00 +0000
<Jason M. Smith>
Mon, 9 Nov 1998 10:45:13 -0500
New Thread : Actel CQ132
Jim Marsico 516-595-5879
Wed, 11 Nov 1998 08:18:00 -0500
Kasprzak, Bill (esd) US
Tue, 10 Nov 1998 15:25:00 PST
New Thread : Cause and Corrective Action
Kasprzak, Bill (esd) US
Mon, 23 Nov 1998 15:24:00 PST
New Thread : Printer printing accuracy and repeatability.
Stephen R. Gregory
Fri, 6 Nov 1998 14:25:52 EST
Poh Kong Hui
Sat, 7 Nov 1998 00:43:18 +0800
New Thread : Testing of OCC board.
Poh Kong Hui
Sun, 22 Nov 1998 22:41:12 +0800
New Thread <No subject>
Alderete, Michael
Tue, 24 Nov 1998 15:14:14 -0800
Dave Connitt
Tue, 24 Nov 1998 14:43:21 -0500
Chemitalic A/S
Thu, 19 Nov 1998 09:06:56 +0100
Jon Seubert
Thu, 12 Nov 1998 23:02:47 -0700
Robert Welch
Tue, 10 Nov 1998 18:07:33 -0500
Vinit Verma
Tue, 10 Nov 1998 13:43:04 -0500
Jim Yohe
Mon, 9 Nov 1998 23:39:39 -0800
<>
Thu, 5 Nov 1998 14:40:04 -0500
Bill Davis
Wed, 4 Nov 1998 17:11:43 -0800
Lepsche, Thomas (NM75)
Wed, 4 Nov 1998 17:14:45 -0700
Lepsche, Thomas (NM75)
Wed, 4 Nov 1998 17:14:13 -0700
Lepsche, Thomas (NM75)
Wed, 4 Nov 1998 17:13:22 -0700
Lepsche, Thomas (NM75)
Wed, 4 Nov 1998 17:12:38 -0700
Mcmaster, Michael
Wed, 4 Nov 1998 12:10:05 -0800
Steve Vetter
Wed, 4 Nov 1998 13:15:46 -0600
Dennis Ward
Wed, 4 Nov 1998 13:28:51 -0500
New Thread Accurately Positioning Components on PWBs
Cash, Alan
Mon, 23 Nov 1998 10:42:18 -0500
Eric Christison
Mon, 23 Nov 1998 12:01:39 GMT
New Thread Alpha wire FIT-130 product line.
Chris_Smith
Tue, 3 Nov 1998 12:48:41 -0600
New Thread Annular Ring !
Andy Cameron
Sat, 7 Nov 1998 10:44:21 EST
Andy Cameron
Fri, 6 Nov 1998 20:18:09 EST
Tom Hybiske
Fri, 6 Nov 1998 15:11:38 +0000
ntcb
Fri, 6 Nov 1998 12:52:05 -0600
New Thread Annular Ring!- May we have an arbiter please...Paging Mr. ...
Seth Goodman
Thu, 19 Nov 1998 15:15:23 -0600
<>
Mon, 9 Nov 1998 11:58:34 EST
New Thread Annular Ring!- May we have an arbiter please...Paging Mr. Coyle!
Tom H
Sun, 8 Nov 1998 00:18:29 -0500
New Thread Assembly : temp. profile for glue cure
amith k
Mon, 23 Nov 1998 02:42:54 PST
New Thread Assembly: temp. profile for glue cure
Stephen R. Gregory
Mon, 23 Nov 1998 13:54:39 EST
New Thread ASSY : Wavesoldering : Dross formation
<>
Tue, 17 Nov 1998 13:42:27 -0600
Kenny Bloomquist
Wed, 4 Nov 1998 06:31:50 -0800
Tumibay, Aleli
Wed, 4 Nov 1998 01:13:39 -0500
amith k
Tue, 3 Nov 1998 20:04:41 PST
New Thread Assy: Contact CS-400E Efficiency
Gary Camac
Tue, 24 Nov 1998 14:43:39 -0600
Joshua Forrester
Tue, 24 Nov 1998 11:46:09 -0600
Collins, Graham
Tue, 24 Nov 1998 13:27:39 -0400
Stephen R. Gregory
Tue, 24 Nov 1998 11:54:33 EST
New Thread Assy: Low quantity Press-fit connector tip...
Stephen R. Gregory
Mon, 2 Nov 1998 08:49:45 EST
Gabe Cherian
Sun, 1 Nov 1998 21:11:33 -0800
Bev Christian
Sun, 1 Nov 1998 21:40:55 -0500
Stephen R. Gregory
Sun, 1 Nov 1998 14:22:02 EST
New Thread ASSY: Modified ETFE Insulation
Jan Satterfield
Mon, 16 Nov 1998 15:20:39 -0700
New Thread Assy: QFP leadframe tin-lead finish
Russ Winslow
Fri, 13 Nov 1998 15:10:53 -0800
<Mary Smoot>
Fri, 13 Nov 1998 14:52:08 -0500
Kelly M. Schriver
Thu, 12 Nov 1998 10:17:53 -0600
McMonagle, Michael R.
Thu, 12 Nov 1998 16:38:48 -0600
Russ Winslow
Thu, 12 Nov 1998 12:39:09 -0800
Jerry Cupples
Thu, 12 Nov 1998 15:22:22 -0600
Bill Davis
Thu, 12 Nov 1998 10:09:12 -0800
David D Hillman
Thu, 12 Nov 1998 07:06:43 -0600
Sauer, Steven T.
Thu, 12 Nov 1998 07:33:00 E
Jerry Cupples
Wed, 11 Nov 1998 17:36:59 -0600
New Thread Assy: Solder-ball FAQ
Jerry Cupples
Tue, 10 Nov 1998 15:32:24 -0600
New Thread Assy: stencil cleaning liquid temps
Jeff Hempton
Mon, 9 Nov 1998 07:42:13 -0500
Jeff Hempton
Fri, 6 Nov 1998 09:39:10 -0500
New Thread assy: tin at $2.48/lb
Jerry Cupples
Mon, 23 Nov 1998 13:46:03 -0600
New Thread assy: wave solder fingers
Vanderhoof, Brad
Tue, 24 Nov 1998 09:53:39 -0800
Jerry Cupples
Tue, 24 Nov 1998 10:15:19 -0600
New Thread ASSY:mixing of high and low-temp PbSn alloys
Alderete, Michael
Wed, 25 Nov 1998 14:55:05 -0800
New Thread Attaching Al heatsink to Si die
Bill Davis
Mon, 23 Nov 1998 08:52:45 -0800
Jean-Paul Clech
Thu, 19 Nov 1998 15:35:03 EST
Werner Engelmaier
Thu, 19 Nov 1998 09:55:46 EST
John Loveluck
Thu, 19 Nov 1998 04:25:34 -0600
<>
Thu, 19 Nov 1998 08:26:15 +0100
Werner Engelmaier
Tue, 17 Nov 1998 18:30:28 EST
John Loveluck
Tue, 17 Nov 1998 10:53:12 -0600
New Thread auto dosing systems
Dave Nemer
Tue, 24 Nov 1998 06:56:39 -0800
Dave Nemer
Mon, 23 Nov 1998 18:57:01 -0800
New Thread Auto Insertion of Triacs
Hamilton, Richard -4454
Fri, 6 Nov 1998 13:04:16 -0700
New Thread AVX Multiguard and Current Leakage Issues
Eldon Sanders
Wed, 11 Nov 1998 12:54:01 -0800
New Thread AW: [TN] Electroless Nickel for Aluminum
No Name Available
Tue, 17 Nov 1998 10:09:07 -0500
Nüchter Wolfgang (FV/FLT) *
Tue, 17 Nov 1998 16:07:14 +0100
New Thread Backfill Recommendation
Jim Gleason
Thu, 5 Nov 1998 16:22:00 -0600
glenn pelkey
Thu, 5 Nov 1998 09:51:13 PST
New Thread Bare Board imperfections
Eltek Ltd. - Process Engineering
Sun, 8 Nov 1998 10:08:15 +0200
Ed Cosper
Fri, 6 Nov 1998 04:06:35 -0600
<>
Thu, 5 Nov 1998 13:13:53 EST
Jim Axton
Thu, 5 Nov 1998 07:59:27 -0800
Connie Korth
Thu, 5 Nov 1998 09:41:51 CST
New Thread Bare Board imperfections -Reply
Glenn Britton
Thu, 5 Nov 1998 10:36:57 -0800
New Thread Bare Die Supplier
Lim Yak Peng
Wed, 4 Nov 1998 11:18:49 +0800
New Thread Bareboard imperfections
Connie Korth
Mon, 9 Nov 1998 08:27:18 CST
New Thread Bend/flex
Andy Magee
Sat, 28 Nov 1998 10:56:28 -0500
Jerome Sallo
Fri, 27 Nov 1998 19:47:14 EST
Werner Engelmaier
Fri, 27 Nov 1998 07:14:05 EST
Gadoua,Pierre
Thu, 26 Nov 1998 11:50:00 -0500
New Thread BGA rework question
Thomas C Han
Mon, 2 Nov 1998 11:38:08 -0800
Rick Thompson
Mon, 2 Nov 1998 08:20:08 -0800
Chan, Marcelo
Mon, 2 Nov 1998 07:37:41 -0500
New Thread BGA Shelf Life
DUCIE NEVILLE
Thu, 26 Nov 1998 14:31:41 -0000
New Thread BGA X-ray
<>
Tue, 24 Nov 1998 13:01:15 -0600
New Thread BGA X-ray inspection
<>
Wed, 25 Nov 1998 12:39:10 -0600
New Thread Blind vias
Scott Stewart
Fri, 20 Nov 1998 18:06:12 -0500
New Thread Board Assembly Quoting
Thibodeau, Chad
Wed, 4 Nov 1998 13:00:23 -0700
New Thread card edge connectors
Lustig, Steven K..
Thu, 12 Nov 1998 15:43:27 -0500
New Thread CEM 1 vs G10
Hiteshew, Michael
Mon, 16 Nov 1998 09:25:53 -0500
Don Vischulis
Sat, 14 Nov 1998 12:45:20 -0600
Curtis, John
Fri, 13 Nov 1998 17:50:19 -0500
New Thread Chemring
Nelson, John
Fri, 6 Nov 1998 08:06:53 -0500
<>
Thu, 5 Nov 1998 21:22:50 EST
<>
Thu, 5 Nov 1998 20:13:28 EST
New Thread Cleaning Solder Pallets
Russ Winslow
Thu, 5 Nov 1998 18:40:52 -0800
No Name Available
Thu, 5 Nov 1998 20:21:23 EST
New Thread Cleaning Un-cured SMA
Barry Ritchie
Thu, 19 Nov 1998 08:15:47 -0500
New Thread COG mounting techniques
Edwin Maximo
Wed, 4 Nov 1998 09:41:36 +0000
New Thread company address
Ahne Oosterhof
Wed, 11 Nov 1998 11:32:59 -0800
Thomas DeSmit
Wed, 11 Nov 1998 07:29:07 -0600
Saverio Alberti
Wed, 11 Nov 1998 10:41:49 +0100
New Thread Conductive Carbon Ink / Silver Polymer Thick Film on Card Edge Contacts
Richard Haynes
Tue, 17 Nov 1998 17:40:22 -0500
<>
Tue, 17 Nov 1998 15:41:46 -0600
New Thread Conformal Coating Needed??
<>
Tue, 17 Nov 1998 15:31:26 -0500
<>
Tue, 17 Nov 1998 13:22:38 -0600
New Thread Conformal Coatings
Richard Haynes
Mon, 9 Nov 1998 12:47:00 -0500
Ryan Jennens
Thu, 5 Nov 1998 14:40:37 -0500
New Thread conformal coating[SHEEN CUP 401/4 specification]
Graham Naisbitt
Thu, 19 Nov 1998 13:22:07 -0000
Larry Crane
Thu, 19 Nov 1998 07:18:31 -0500
ajay agarwal
Wed, 18 Nov 1998 16:41:17 PST
New Thread Copper Plating
Roger Mouton
Thu, 19 Nov 1998 22:03:05 EST
Werner Engelmaier
Wed, 18 Nov 1998 19:37:21 EST
mcarano
Sun, 15 Nov 1998 13:25:34 -0600
<>
Wed, 11 Nov 1998 20:03:20 EST
<>
Wed, 11 Nov 1998 15:45:49 EST
<>
Wed, 11 Nov 1998 15:03:20 EST
Eric Yakobson
Wed, 11 Nov 1998 12:11:36 -0500
New Thread Copper plating & Copper thickness
mcarano
Wed, 11 Nov 1998 23:10:29 -0600
Leslie O. Connally
Wed, 11 Nov 1998 08:39:17 -0600
Roger Mouton
Tue, 10 Nov 1998 13:07:58 EST
Eric Yakobson
Mon, 9 Nov 1998 14:41:29 -0500
Richard Haynes
Wed, 4 Nov 1998 16:37:31 -0500
Werner Engelmaier
Mon, 2 Nov 1998 20:50:59 EST
Richard Haynes
Sun, 1 Nov 1998 17:49:49 -0500
Richard Haynes
Sat, 31 Oct 1998 21:57:19 -0500
mcarano
Sun, 1 Nov 1998 09:41:26 -0600
New Thread copper plating and anode area
mcarano
Sun, 15 Nov 1998 13:27:05 -0600
New Thread Copper plating Anode ratio
mcarano
Sat, 14 Nov 1998 22:37:51 -0600
Francis Lai
Sat, 14 Nov 1998 14:45:01 -0500
New Thread Corrrection Annular Ring !
Andy Cameron
Sat, 7 Nov 1998 11:07:26 EST
New Thread Counter Sunk Screws to mount PCBs
Kenny Bloomquist
Tue, 17 Nov 1998 07:57:38 -0800
Hiteshew, Michael
Tue, 17 Nov 1998 10:54:23 -0500
Greg Kaskey
Tue, 17 Nov 1998 10:23:22 -0500
New Thread Covering Vias
Seth Goodman
Tue, 24 Nov 1998 11:56:22 -0600
Ryan Jennens
Mon, 23 Nov 1998 13:01:53 -0500
New Thread Daisy chain
Paul Klasek
Wed, 11 Nov 1998 11:36:06 +1100
Zoran Raich
Mon, 9 Nov 1998 18:51:17 +1100
Edwin Maximo
Mon, 9 Nov 1998 11:19:23 +0000
New Thread DEK GSX265 PROFLOW HEAD UPDATE
Kathy Palumbo
Wed, 18 Nov 1998 07:27:39 -0800
New Thread DES: Pressfit Connectors & White Tin
Rich Edgar
Thu, 19 Nov 1998 15:09:21 EST
Steve Collins
Wed, 18 Nov 1998 14:55:06 -0700
New Thread dewetting
<>
Tue, 3 Nov 1998 08:30:31 -0800
New Thread DFM for SMT Spec.
Morton, John
Thu, 12 Nov 1998 14:09:16 -0500
John Mastorides
Thu, 12 Nov 1998 13:24:44 -0500
New Thread Direct Bond Copper
WM Cheng
Wed, 4 Nov 1998 18:09:39 EST
New Thread Electroless Nickel for Aluminum
Mike Owens
Mon, 16 Nov 1998 12:30:24 -0600
New Thread electroless pth
Gerard O'Brien
Wed, 4 Nov 1998 12:36:19 -0500
Jac Kroeker
Mon, 2 Nov 1998 13:43:50 -0800
New Thread Electroplating and Surface Finishing Society National Convention
Richard Haynes
Fri, 6 Nov 1998 19:15:15 -0500
New Thread ENC: [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS
No Name Available
Fri, 20 Nov 1998 14:00:23 -0200
New Thread Epoxy Stencil Design?
Stephen R. Gregory
Thu, 5 Nov 1998 10:57:18 EST
Gary Camac
Thu, 5 Nov 1998 06:14:54 -0600
Rick Thompson
Wed, 4 Nov 1998 10:29:22 -0800
New Thread Epoxy Stencil Design? -Reply
Matthew Park
Wed, 4 Nov 1998 14:19:44 -0800
New Thread FAB: Cupric Chloride etching
Leslie O. Connally
Mon, 9 Nov 1998 14:36:39 -0600
<Rudy Sedlak>
Sun, 8 Nov 1998 09:51:14 EST
Phil Culpovich
Sat, 7 Nov 1998 09:29:15 -0800
Timothy A. Estes
Fri, 6 Nov 1998 14:05:54 -0700
Ted Stern
Fri, 6 Nov 1998 11:05:29 -0800
Leslie O. Connally
Fri, 6 Nov 1998 08:25:16 -0500
<>
Fri, 6 Nov 1998 00:33:49 EST
New Thread Failure of Rigid Flex
Paul Terranova
Mon, 2 Nov 1998 09:41:54 -0500
New Thread Finding the man who helped me !(+/-3mill)
<>
Wed, 25 Nov 1998 13:30:23 +0900
New Thread FINE LINE COPPER PLATING
Eric Yakobson
Mon, 16 Nov 1998 14:03:45 -0500
mcarano
Sun, 15 Nov 1998 13:29:21 -0600
mcarano
Sat, 14 Nov 1998 22:29:00 -0600
mcarano
Sat, 14 Nov 1998 12:50:01 -0600
Eric Yakobson
Fri, 13 Nov 1998 13:46:06 -0500
<>
Thu, 12 Nov 1998 22:40:40 EST
Richard Haynes
Thu, 12 Nov 1998 14:49:53 -0500
Huffman, Connie - LYPME
Thu, 12 Nov 1998 12:30:30 -0500
New Thread Fine pitch
No Name Available
Mon, 2 Nov 1998 19:51:16 EST
New Thread Fine Pitch info
Paul Gould
Mon, 2 Nov 1998 11:54:45 -0000
No Name Available
Sun, 1 Nov 1998 11:04:01 EST
New Thread fixing exposed copper/traces
Bruce Adams
Wed, 11 Nov 1998 04:41:13 -0800
Stephen R. Gregory
Tue, 10 Nov 1998 12:53:01 EST
Bryan Bloom
Tue, 10 Nov 1998 08:54:22 -0800
New Thread Flex to FR4 with hot bar
Rose, Daniel B
Wed, 4 Nov 1998 09:33:22 -0700
New Thread Flexible Circuits
Fujikura Ltd.
Wed, 4 Nov 1998 10:59:16 +0900
Jay Bitanga
Wed, 4 Nov 1998 10:52:33 +0000
Bock Ming Gai Joanne
Mon, 2 Nov 1998 11:48:50 +0800
New Thread Flexible Conformal Coating
Barry Ritchie
Thu, 19 Nov 1998 08:33:06 -0500
New Thread Flying Grid Bare Board Testers
Test Engineering
Wed, 4 Nov 1998 07:16:05 -0500
New Thread FOR YOUR HELP
McMonagle, Michael R.
Mon, 9 Nov 1998 08:19:17 -0600
DeLorenzo, Stacey
Thu, 5 Nov 1998 08:59:00 -0500
HUCKL CHANG, P.E./SHA 086-520-7314449.EXT.30156
Thu, 5 Nov 1998 13:41:56 +0800
New Thread FR4 properties
Werner Engelmaier
Mon, 30 Nov 1998 19:22:29 EST
Bill Davis
Mon, 30 Nov 1998 12:08:11 -0800
Kady, Kevin P
Mon, 30 Nov 1998 11:37:12 -0600
New Thread Fume Extraction for Manual Soldering
Dan Foster
Fri, 20 Nov 1998 13:07:21 -0500
Cam Rankin
Thu, 19 Nov 1998 18:59:33 -0500
New Thread GenCAM
Steve Collins
Tue, 10 Nov 1998 11:55:57 -0700
New Thread Gold Finger Stains
David Jandzinski
Fri, 20 Nov 1998 08:00:15 -0700
Russell Spivey
Fri, 20 Nov 1998 09:31:02 -0000
David Jandzinski
Thu, 19 Nov 1998 14:56:08 -0700
Joy, Stephen C
Thu, 19 Nov 1998 10:38:00 -0800
New Thread Gold Finger Stains & Contact Resistance.
WILLIAM G KENYON 302-652-4272
Fri, 20 Nov 1998 23:26:00 -0500
New Thread Gold mask etchant
Smith Russell MSM LAPO US
Mon, 30 Nov 1998 20:49:00 +0100
Alex Neussendorfer
Wed, 25 Nov 1998 11:27:44 -0600
Andi Petculescu
Wed, 25 Nov 1998 11:36:30 -0500
New Thread HASL
Lenny Kurup
Mon, 30 Nov 1998 12:00:08 -0500
<>
Sun, 29 Nov 1998 16:48:05 -0600
Paul Gould
Sun, 29 Nov 1998 11:08:11 -0000
<>
Sat, 28 Nov 1998 08:22:11 -0600
Asbell
Sat, 27 Nov 2004 07:09:55 -0600
<>
Fri, 27 Nov 1998 14:02:08 -0600
<>
Fri, 27 Nov 1998 11:31:40 -0600
Werner Engelmaier
Wed, 25 Nov 1998 20:23:27 EST
Afri Singh
Wed, 25 Nov 1998 15:58:17 -0500
George Toman
Wed, 25 Nov 1998 11:42:46 -0500
<>
Wed, 25 Nov 1998 09:46:33 -0600
Afri Singh
Tue, 24 Nov 1998 23:27:42 -0500
New Thread Heat Sinks on PWBs
<>
Fri, 27 Nov 1998 14:32:18 -0600
Barry Bates
Fri, 20 Nov 1998 09:28:16 -0000
Hiteshew, Michael
Thu, 19 Nov 1998 16:40:15 -0500
New Thread Heated ET
<>
Tue, 17 Nov 1998 16:19:01 -0600
Werner Engelmaier
Wed, 4 Nov 1998 21:35:52 EST
Edwards, Ted A (AZ75)
Wed, 4 Nov 1998 07:31:33 -0700
Eltek Ltd. - Process Engineering
Wed, 4 Nov 1998 07:29:38 +0200
Matthew Sanders
Tue, 3 Nov 1998 10:52:49 -0800
New Thread Helium leak rate measurements.
Myron Papiz
Thu, 12 Nov 1998 10:31:12 -0500
New Thread Help locating PCB drill bits
Russell Epstein
Thu, 12 Nov 1998 09:40:38 PST
New Thread Help needed on PBGA Wire Bonding
91dhzp
Sat, 21 Nov 1998 00:09:01 +0800
New Thread help! -- how to meet the +/-3mil(0.076mm)routing tolerance
<>
Fri, 20 Nov 1998 19:54:26 +0900
New Thread hole plug source
Paul Klasek
Wed, 4 Nov 1998 10:14:33 +1100
Sauer, Steven T.
Tue, 3 Nov 1998 12:59:00 E
McMonagle, Michael R.
Tue, 3 Nov 1998 11:43:25 -0600
<Jason M. Smith>
Tue, 3 Nov 1998 11:50:26 -0500
New Thread Hot Bar Production Methods
<>
Thu, 19 Nov 1998 11:27:37 -0600
<Mary Smoot>
Thu, 19 Nov 1998 08:19:28 -0500
New Thread IL Clearance Calculation
jenny
Mon, 16 Nov 1998 10:44:24 +0800
New Thread Immersion Gold SMT PWB
Candeas, Barrie
Mon, 9 Nov 1998 10:45:09 -0500
New Thread Immesion Tin (The other White meat)
<>
Tue, 10 Nov 1998 09:52:25 -0600
<>
Mon, 9 Nov 1998 14:57:47 -0600
New Thread Info on Nelco-6 laminate material
KELLY M SCHRIVER
Tue, 24 Nov 1998 11:29:00 -0500
Ken Patel
Mon, 23 Nov 1998 09:43:04 -0800
New Thread Inks used for Test Stamps on PCBs
Paul Wilson
Wed, 11 Nov 1998 11:15:50 -0500
Test Engineering
Tue, 10 Nov 1998 09:59:40 -0500
New Thread Intel uBGA Flash, Bottom Side SMT?
Jim Gleason
Sat, 31 Oct 1998 07:02:10 -0600
New Thread Intermittent Dewetting
Werner Engelmaier
Mon, 2 Nov 1998 20:51:02 EST
Hugh Scott Miller
Mon, 2 Nov 1998 07:36:22 -0500
New Thread IPC 4101
Mcmaster, Michael
Thu, 5 Nov 1998 15:48:39 -0800
<>
Thu, 5 Nov 1998 14:15:28 -0500
New Thread IPC Designers Council Elections
Jim Yohe
Sun, 8 Nov 1998 12:35:24 -0800
New Thread IPC News Release: IPC Creates Equipment Exchange Website
Jack Crawford
Thu, 19 Nov 1998 13:19:15 -0600
New Thread IPC News Release: IPC/SMEMA Council to Intoduce new Trad...
<>
Fri, 13 Nov 1998 05:44:18 EST
New Thread IPC News Release: IPC/SMEMA Council to Intoduce new Trade ...
Stephen R. Gregory
Thu, 12 Nov 1998 22:32:05 EST
New Thread IPC News Release: IPC/SMEMA Council to Intoduce new Trade Show
David D Hillman
Thu, 12 Nov 1998 17:37:15 -0600
David Bergman
Thu, 12 Nov 1998 14:50:19 -0600
New Thread IPC News Release: IPC/SMEMA Council to Intoduce newTrade ...
Stephen R. Gregory
Fri, 13 Nov 1998 15:32:42 EST
New Thread Jay DeKing
Bill Stuhler
Fri, 13 Nov 1998 12:27:46 -0500
New Thread KODAK 960 FILM PROCESSOR
Modular Components National, Inc.
Wed, 25 Nov 1998 11:26:32 -0500
New Thread Laminate
James R. Paulus
Mon, 16 Nov 1998 14:37:31 EST
Ed Cosper
Mon, 16 Nov 1998 22:16:17 -0600
New Thread Layers Count vs Thickness
<>
Wed, 4 Nov 1998 14:08:27 -0600
New Thread Lead bending.
Jeremy Drake
Tue, 3 Nov 1998 08:38:54 +0000
Frank Hinojos
Mon, 2 Nov 1998 16:46:54 -0800
New Thread Lead-Free legislation
Rob Horsley
Mon, 2 Nov 1998 17:03:22 +0000
Oliver Kierse
Mon, 2 Nov 1998 16:31:53 GMT
New Thread life time of Ni/Au contacts?
mark ross
Thu, 12 Nov 1998 11:39:45 -0500
Matthias Mansfeld
Wed, 11 Nov 1998 19:16:38 +0100
New Thread Lines Between Pins
Dr. Warren Smith
Tue, 1 Dec 1998 00:53:59 -0500
New Thread Logic Device, drop test failure
Jim Marsico 516-595-5879
Wed, 11 Nov 1998 11:25:00 -0500
Eric Christison
Wed, 11 Nov 1998 15:47:41 GMT
Bridget Piper
Tue, 10 Nov 1998 15:34:23 -0000
New Thread Looking for dummy ceramic QFP parts
Cyker, Howard A (Howie)
Wed, 11 Nov 1998 14:55:37 -0500
Sauer, Steven T.
Wed, 11 Nov 1998 15:06:00 E
<>
Wed, 11 Nov 1998 14:23:02 -0600
Chan, Marcelo
Wed, 11 Nov 1998 13:48:03 -0500
New Thread Marking Pen
Marco Biagtan
Mon, 30 Nov 1998 18:02:41 +0700
New Thread Marking systems
McMonagle, Michael R.
Wed, 11 Nov 1998 12:46:09 -0600
<>
Wed, 11 Nov 1998 10:37:40 -0600
New Thread mcm designers
Management Recruiters of St. Lawrence County
Mon, 9 Nov 1998 11:59:33 -0500
New Thread measuring Shear Force
Scott Davies
Fri, 13 Nov 1998 09:07:16 -0500
New Thread Melting point of 90/10 and 95/5 solder
Phillip E. Hinton
Wed, 25 Nov 1998 18:15:27 EST
Jerry Cupples
Wed, 25 Nov 1998 15:08:13 -0600
KELLY M SCHRIVER
Wed, 25 Nov 1998 13:04:00 -0500
<>
Wed, 25 Nov 1998 12:18:55 -0600
Ken Patel
Wed, 25 Nov 1998 09:45:41 -0800
New Thread Microscopes & Cross Sectioning equipment for HDIS
Scott Stewart
Tue, 24 Nov 1998 18:06:35 -0500
Joe Dickson
Tue, 24 Nov 1998 10:11:32 PST
New Thread MIL-1235 - Replaced ??
Robert P. Pelletier
Tue, 3 Nov 1998 08:32:44 -0800
<>
Mon, 2 Nov 1998 14:56:04 -0800
New Thread MIL-C-28809
Richard Haynes
Mon, 2 Nov 1998 15:08:49 -0500
Robert P. Pelletier
Mon, 2 Nov 1998 08:59:10 -0800
McGlaughlin, Jeffrey A
Mon, 2 Nov 1998 10:06:37 -0500
New Thread modulus & Poisson's ratio
David Jandzinski
Wed, 18 Nov 1998 10:12:17 -0700
Sheila Smith
Wed, 18 Nov 1998 10:55:34 -0500
New Thread Moisture sensitive
Russ Winslow
Tue, 17 Nov 1998 18:37:12 -0800
Edwin Maximo
Tue, 17 Nov 1998 08:40:50 +0000
New Thread Moisture Sensitive Devices
Bill Davis
Mon, 16 Nov 1998 08:18:02 -0800
Bev Christian
Fri, 13 Nov 1998 17:29:58 -0500
Russ Winslow
Sat, 14 Nov 1998 12:57:11 -0800
Yves Trudell
Fri, 13 Nov 1998 15:55:36 -0500
New Thread mounting SOIC using Chipshooter
Jeff Hempton
Tue, 3 Nov 1998 08:06:13 -0500
Jeff Hempton
Tue, 3 Nov 1998 07:55:40 -0500
Marc O. Bituagan
Tue, 3 Nov 1998 13:48:54 +0000
New Thread neckdown
Wolfe, Robert
Mon, 16 Nov 1998 11:46:04 -0500
Khaled H. Fouad
Fri, 13 Nov 1998 01:35:28 +0200
Wolfe, Robert
Thu, 12 Nov 1998 17:30:07 -0500
Tenison Stone
Thu, 12 Nov 1998 15:17:18 -0600
New Thread Need a Number - Solder Station One
Mark Simmons
Wed, 11 Nov 1998 10:18:02 -0800
Jerome Sallo
Wed, 11 Nov 1998 12:08:48 EST
<>
Tue, 10 Nov 1998 16:33:35 -0600
New Thread Need help
jim
Thu, 19 Nov 1998 10:16:23 -0600
Russell Epstein
Wed, 18 Nov 1998 10:01:26 PST
New Thread Need Kleenox "P" MSDS and information
Stephen R. Gregory
Sun, 15 Nov 1998 20:30:09 EST
Moss, Thomas
Sun, 15 Nov 1998 08:48:00 -0800
New Thread Need PCB Designer in Houston
mark ross
Thu, 12 Nov 1998 11:36:38 -0500
Barbara Burcham
Wed, 11 Nov 1998 16:31:17 -0600
New Thread need test lab for no clean process
Stephen R. Gregory
Wed, 11 Nov 1998 21:55:54 EST
Bev Christian
Wed, 11 Nov 1998 15:42:04 -0500
Rudolph Yu
Wed, 11 Nov 1998 09:19:08 -0800
New Thread Ni/Pd/Au Lead Finish
David D Hillman
Fri, 20 Nov 1998 16:43:27 -0600
KELLY M SCHRIVER
Thu, 19 Nov 1998 14:54:00 -0500
New Thread No SUBJECT e-mail
Werner Engelmaier
Thu, 5 Nov 1998 23:13:35 EST
New Thread non wetting agent for epoxy resin
Chen Fung Leng
Tue, 17 Nov 1998 17:49:24 -0800
New Thread OSP Dwell between thermal processes
<>
Wed, 4 Nov 1998 17:10:22 -0600
New Thread Overcoat Pen
Wilber E Heath weh Wil
Tue, 17 Nov 1998 10:29:00 -0600
New Thread P and B content in electroless nickel
Richard Haynes
Sat, 14 Nov 1998 23:10:25 -0500
New Thread PANEL AGITATION IN DEEP NICKEL/GOLD PLATING.
Lenny Kurup
Wed, 25 Nov 1998 16:10:45 -0500
New Thread Parylene Conformal Coating
Jeremy Drake
Tue, 3 Nov 1998 08:25:03 +0000
Kelly M. Schriver
Mon, 2 Nov 1998 15:33:15 -0600
New Thread Pattern Copper Plating
Smith Russell MSM LAPO US
Wed, 18 Nov 1998 07:40:00 +0100
Leslie O. Connally
Mon, 16 Nov 1998 08:16:31 -0600
Francis Lai
Sun, 15 Nov 1998 16:52:55 -0500
New Thread Pb in ceramic components
Werner Engelmaier
Thu, 12 Nov 1998 08:42:35 EST
David Whalley
Fri, 13 Nov 1998 09:24:39 +0000
<>
Fri, 13 Nov 1998 08:32:02 +0100
Jos Groffils
Tue, 10 Nov 1998 16:21:54 +0000
New Thread PCB ASSEMBLY COST ANALYSIS
Dave Hamilton
Wed, 18 Nov 1998 06:10:22 -0500
New Thread PCB FAB SHOPS WITH BELLCORE TR-NWT-000078 CERTIFICATION
Ed Cosper
Thu, 12 Nov 1998 03:29:37 -0600
Management Recruiters of St. Lawrence County
Wed, 11 Nov 1998 14:20:57 -0500
New Thread PCBA Routing Survey
Stephen R. Gregory
Mon, 30 Nov 1998 17:38:27 EST
Kimmey, Frank
Mon, 30 Nov 1998 14:30:22 -0800
<>
Mon, 30 Nov 1998 16:39:48 EST
New Thread Problem in Gold Plating
<>
Thu, 12 Nov 1998 15:33:30 -0500
<>
Thu, 12 Nov 1998 15:12:50 EST
Paul Gould
Wed, 11 Nov 1998 11:41:52 -0000
Yongheng Zhu
Fri, 6 Nov 1998 17:48:18 -0600
mcarano
Fri, 6 Nov 1998 20:45:50 -0600
Francis Lai
Fri, 6 Nov 1998 17:22:57 -0500
New Thread Problem in Gold Plating -Reply
Ken Bridges
Sun, 15 Nov 1998 07:48:56 -0800
New Thread Process courses
Richard Haynes
Fri, 27 Nov 1998 12:03:03 -0500
Miguel Angel Pulido B.
Fri, 27 Nov 1998 09:06:05 -0600
New Thread Protective laminate
Eric Janssens
Fri, 13 Nov 1998 10:32:38 +0100
New Thread Pulse Plating - Copper
<>
Wed, 4 Nov 1998 22:06:42 EST
New Thread Pulse Plating Versus DC Plating
Hinners, Hans - LYPME
Tue, 17 Nov 1998 10:06:18 -0500
New Thread Pulse Plating: Cu and PCB
Richard Haynes
Mon, 16 Nov 1998 14:19:28 -0500
New Thread Q on Ion Chromatography
Tumibay, Aleli
Mon, 30 Nov 1998 22:42:47 -0500
New Thread QFP leadframe tin-lead finish
Brent Alcorn
Wed, 18 Nov 1998 22:40:19 -0400
Ahne Oosterhof
Tue, 17 Nov 1998 17:09:13 -0800
Matthias Mansfeld
Wed, 18 Nov 1998 02:47:10 +0100
<>
Tue, 17 Nov 1998 17:52:40 -0600
New Thread Quoting Board Builds
Thibodeau, Chad
Tue, 3 Nov 1998 13:14:47 -0700
New Thread Quoting Board Builds -Reply
David Rist
Tue, 3 Nov 1998 20:12:59 -0800
New Thread Re Cause/Effect
<>
Wed, 25 Nov 1998 14:23:55 EST
New Thread Re Gold
<>
Mon, 9 Nov 1998 20:56:18 EST
New Thread Re Repair Limits
<>
Sun, 15 Nov 1998 08:45:38 EST
New Thread Re SolderBalls
<>
Thu, 12 Nov 1998 09:49:07 EST
<>
Wed, 11 Nov 1998 09:13:40 EST
Vaughan, Ralph H
Wed, 11 Nov 1998 04:55:03 -0800
<>
Tue, 10 Nov 1998 10:27:59 EST
Hiteshew, Michael
Tue, 10 Nov 1998 11:02:24 -0500
Gary Camac
Tue, 10 Nov 1998 06:59:02 -0600
<>
Mon, 9 Nov 1998 20:56:22 EST
New Thread RE True Position and Registration on Fab
John Laur
Thu, 19 Nov 1998 15:17:04 -0600
New Thread ReCard Edge Connectors
<>
Thu, 12 Nov 1998 20:16:33 EST
New Thread Recent Discussion on Ni/Pd Finished ICs
Doug Romm
Mon, 2 Nov 1998 08:41:33 -0800
New Thread ReEnvironControl
<>
Mon, 9 Nov 1998 20:56:24 EST
New Thread Reflow ovens
Evan D Jones
Tue, 10 Nov 1998 15:12:07 +1000
New Thread Removing wet SMT epoxy from flex circuits....
Babyak
Wed, 18 Nov 1998 15:38:03 +0000
Chan, Marcelo
Wed, 18 Nov 1998 15:23:41 -0500
New Thread Repair Limits
Paul Klasek
Sun, 15 Nov 1998 11:12:33 +1100
Yves Trudell
Fri, 13 Nov 1998 11:58:34 -0500
New Thread Resource needed for Palladium/Nickel Service
Jim Gleason
Mon, 2 Nov 1998 17:37:20 -0600
Chris Dorland
Mon, 2 Nov 1998 14:46:33 -0500
New Thread rogers
Thomas DeSmit
Tue, 10 Nov 1998 09:57:40 -0600
Thomas DeSmit
Tue, 10 Nov 1998 09:51:44 -0600
<>
Tue, 10 Nov 1998 09:44:48 -0600
<>
Tue, 10 Nov 1998 10:32:35 EST
New Thread Scoring PCAs
Stephen R. Gregory
Mon, 30 Nov 1998 19:03:44 EST
<>
Mon, 30 Nov 1998 17:15:45 -0600
New Thread Screenprint problems
Seth Goodman
Sun, 22 Nov 1998 15:17:05 -0600
Jindra, Larry
Sat, 21 Nov 1998 11:13:18 -0800
Greg Parke
Fri, 20 Nov 1998 11:54:20 -0500
New Thread Seed for Cu plating in high freq.
Francis Lai
Sun, 15 Nov 1998 19:07:38 -0500
New Thread Selective Soldering
McMonagle, Michael R.
Mon, 9 Nov 1998 07:49:17 -0600
Jim Gleason
Thu, 5 Nov 1998 16:15:06 -0600
Thibodeau, Chad
Thu, 5 Nov 1998 14:31:20 -0700
New Thread Selective Soldering Machine
Bridget Piper
Tue, 24 Nov 1998 11:18:41 -0000
Lik-Jen Wu
Fri, 20 Nov 1998 18:32:20 -0500
New Thread shear testers
Bev Christian
Thu, 12 Nov 1998 14:06:37 -0500
Gerard O'Brien
Thu, 12 Nov 1998 12:00:06 -0500
New Thread Shelf life of HASL fabs.
David D Hillman
Wed, 25 Nov 1998 06:11:42 -0600
Jon Seubert
Mon, 23 Nov 1998 23:54:08 -0700
New Thread SIGNOFF *
Dennis Schneider
Sun, 15 Nov 1998 17:31:32 -0500
New Thread Silver Migration
Eric Yakobson
Wed, 25 Nov 1998 12:45:51 -0500
thomas peters
Tue, 24 Nov 1998 21:52:59 PST
Eric Yakobson
Mon, 23 Nov 1998 14:55:10 -0500
<>
Fri, 20 Nov 1998 19:36:32 -0600
Jos Groffils
Mon, 9 Nov 1998 07:20:48 +0000
New Thread Simple Component Source.
Thomas DeSmit
Tue, 10 Nov 1998 15:54:12 -0600
Jack Bryant
Wed, 11 Nov 1998 00:03:23 -0500
New Thread SMEMA Printer and SMPI Conveyors
Brad Vanderhoof
Wed, 11 Nov 1998 11:00:10 -0800
Scott Davies
Wed, 11 Nov 1998 09:54:18 -0500
New Thread SMT Glue
Bev Christian
Mon, 30 Nov 1998 08:57:16 -0500
Vinit Verma
Mon, 30 Nov 1998 13:19:23 +0500
New Thread SMT solder balls
Jim Christenson
Mon, 9 Nov 1998 08:08:59 -0800
New Thread SMT ZENER
Stephen R. Gregory
Wed, 25 Nov 1998 15:21:40 EST
Patten, James
Wed, 25 Nov 1998 11:44:19 -0800
New Thread SMTA Silicon Valley mtg DFM & ESMT Design for Manuf
Stuart Chessen
Sat, 7 Nov 1998 08:02:00 -0800
New Thread Solder balls on chip components
Pratap Singh
Sat, 14 Nov 1998 18:54:23 -0800
Mark Austin
Tue, 10 Nov 1998 09:23:00 +0000
Vinit Verma
Tue, 10 Nov 1998 12:19:33 -0500
New Thread solder comparisons
<Jason M. Smith>
Fri, 20 Nov 1998 07:44:32 -0500
New Thread Solder mask Dimple Plates
STEVEN CASTALDI
Sat, 7 Nov 1998 20:38:05 -0500
New Thread Solder Mixing
Andy Magee
Thu, 26 Nov 1998 08:51:47 -0500
New Thread Solder on goldfinger
Tan Boon Kiat
Fri, 27 Nov 1998 00:35:16 +0800
New Thread solder paste inquery
Benedicto Cruz
Tue, 10 Nov 1998 11:19:38 +0000
New Thread Solder paste inspection
Chan, Marcelo
Thu, 5 Nov 1998 15:25:00 -0500
New Thread Solder Paste????
Manish
Fri, 6 Nov 1998 13:06:33 -0500
Paul
Fri, 6 Nov 1998 12:27:31 -0500
New Thread solder resist between solder land to prevent solder brid ging
Paul Klasek
Mon, 2 Nov 1998 15:58:07 +1100
New Thread solder resist between solder land to prevent solder bridging
Ken Fong
Mon, 2 Nov 1998 10:06:43 EST
New Thread Solderability Head Scratcher
<>
Wed, 18 Nov 1998 12:29:27 -0600
Hugh Scott Miller
Wed, 18 Nov 1998 05:11:47 -0500
New Thread Soldering Palladium plated leads
Jerry Cupples
Mon, 9 Nov 1998 16:18:29 -0600
New Thread Soldering to Gold
Phillip E. Hinton
Sun, 22 Nov 1998 19:55:08 EST
Jerry Cupples
Wed, 18 Nov 1998 15:07:36 -0600
<>
Wed, 18 Nov 1998 12:19:37 -0600
PAT DIAMOND
Mon, 2 Nov 1998 13:45:45 EMT+0
New Thread Soldermask adhesion over tin/lead
Joe Felts
Tue, 10 Nov 1998 00:47:36 -0700
Terrie Balck
Mon, 9 Nov 1998 12:51:56 -0800
New Thread Soldermask adhesion over tin/lead -Reply
bob metcalf
Tue, 10 Nov 1998 16:26:19 -0800
New Thread Soldermask Breakdown in Humidity Chamber
Richard Haynes
Thu, 5 Nov 1998 17:58:11 -0500
Pedersen, Anders
Thu, 5 Nov 1998 10:45:01 -0500
New Thread SOLDERMASK PLUGGED VIAS
Lolmaugh, Scott (AZ15)
Wed, 4 Nov 1998 11:29:31 -0700
New Thread Soldermask surface prep
Ed Cosper
Tue, 10 Nov 1998 01:59:13 -0600
New Thread SPC
<>
Tue, 17 Nov 1998 11:42:47 -0500
Greg Jones
Mon, 16 Nov 1998 10:28:54 -0800
Ed Cosper
Mon, 16 Nov 1998 20:41:26 -0600
PELCHAT_JM
Mon, 16 Nov 1998 08:24:42 -0500
Alan Kreplick
Mon, 16 Nov 1998 07:16:47 -0500
New Thread Spec ref for lifted pad after assy
Dave Acton
Thu, 12 Nov 1998 17:19:48 -0500
Steve Collins
Thu, 12 Nov 1998 14:57:10 -0700
Steve Collins
Thu, 12 Nov 1998 13:05:57 -0700
New Thread Specctra router Question
Dave Connitt
Wed, 25 Nov 1998 13:00:12 -0500
New Thread Specification
Neil Trivedi
Fri, 20 Nov 1998 14:05:49 -0600
New Thread SRT
Rick Thompson
Tue, 24 Nov 1998 17:04:21 -0800
Fikreta Jusufagic
Tue, 24 Nov 1998 15:40:10 -0800
Joshua Forrester
Tue, 24 Nov 1998 14:18:44 -0600
New Thread Standards
Erik Nilsson
Tue, 24 Nov 1998 18:25:03 -0600
New Thread Stripping Enamel covered wires
KK Chin
Wed, 11 Nov 1998 09:02:09 -0800
PAT DIAMOND
Wed, 11 Nov 1998 16:01:40 EMT+0
New Thread Subj: Re: [TN] SMT ZENER
Patten, James
Wed, 25 Nov 1998 14:20:32 -0800
Patten, James
Wed, 25 Nov 1998 13:58:39 -0800
Stephen R. Gregory
Wed, 25 Nov 1998 16:19:51 EST
New Thread Subscribe
Ted Tessiert
Thu, 26 Nov 1998 00:14:13 -0800
New Thread Syracuse Area DC Chapter
<>
Thu, 12 Nov 1998 15:18:26 EST
New Thread Temp & Humidity in SMT plant.
Sira Rikulsurakan
Wed, 11 Nov 1998 07:44:56 +0700
New Thread Temp Profiling
Werner Engelmaier
Thu, 12 Nov 1998 08:29:18 EST
Werner Engelmaier
Wed, 11 Nov 1998 15:01:51 EST
David Whalley
Mon, 9 Nov 1998 17:38:00 +0000
New Thread Test message - please disregard
Hugo Scaramuzza
Tue, 17 Nov 1998 15:56:09 -0600
New Thread TEST: Flying "Grid", not "Probe"
Test Engineering
Sat, 7 Nov 1998 07:57:46 -0500
New Thread Thermal Resistance Testing labs
Yuan Li
Fri, 6 Nov 1998 13:15:33 -0800
New Thread THERMOPLASTIC RELIABILITY
Bill Davis
Mon, 23 Nov 1998 08:46:25 -0800
Werner Engelmaier
Thu, 19 Nov 1998 10:13:32 EST
<>
Fri, 20 Nov 1998 08:43:05 +0100
Marianne Romansky
Thu, 19 Nov 1998 10:03:47 -0500
<>
Thu, 19 Nov 1998 13:04:35 +0100
New Thread Through hole vs SMT
<>
Tue, 17 Nov 1998 14:20:20 -0600
New Thread Tin Oxide
<Rudy Sedlak>
Mon, 30 Nov 1998 09:52:19 EST
Bev Christian
Fri, 27 Nov 1998 08:14:03 -0500
<>
Fri, 27 Nov 1998 08:19:43 +0100
Bev Christian
Thu, 26 Nov 1998 08:34:30 -0500
<>
Thu, 26 Nov 1998 04:56:00 -0600
<>
Thu, 26 Nov 1998 08:14:11 +0100
Stephen R. Gregory
Wed, 25 Nov 1998 19:12:10 EST
Kathy Palumbo
Wed, 25 Nov 1998 15:51:39 -0800
New Thread Tin/Lead Solder Coating Minimum Thickness Requirements
<>
Fri, 20 Nov 1998 19:28:47 -0600
Fred Shubert
Fri, 20 Nov 1998 14:49:15 -0500
<>
Fri, 20 Nov 1998 09:55:37 -0600
Rob Horsley
Fri, 20 Nov 1998 14:57:54 +0000
Eddie Brunker
Fri, 20 Nov 1998 14:32:41 GMT
Eddie Brunker
Fri, 20 Nov 1998 14:06:39 GMT
Jindra, Larry
Thu, 19 Nov 1998 10:11:28 -0800
<>
Thu, 19 Nov 1998 09:31:23 -0600
Eddie Brunker
Thu, 19 Nov 1998 10:33:07 GMT
<>
Wed, 18 Nov 1998 12:41:43 -0600
Hugh Scott Miller
Wed, 18 Nov 1998 05:09:27 -0500
New Thread Touch Up Pen's
Steve Loschiavo
Wed, 11 Nov 1998 18:34:10 -0800
Len Fournier
Wed, 11 Nov 1998 17:04:12 -0500
New Thread True Position and Registration on Fab
Mike Mikucki
Fri, 20 Nov 1998 10:37:43 -0500
Joseph Fjelstad
Fri, 20 Nov 1998 07:41:36 -0800
Ken Patel
Wed, 18 Nov 1998 17:03:21 -0800
New Thread Unclad FR4 Laminate?
Rick Thompson
Wed, 25 Nov 1998 06:29:58 -0800
New Thread UV Cure Touchup
Alex Neussendorfer
Wed, 11 Nov 1998 18:02:20 -0600
New Thread Via holes on SMD pads?
<>
Wed, 25 Nov 1998 13:56:07 -0600
Thomas Martin
Fri, 6 Nov 1998 11:08:59 -0500
Hiteshew, Michael
Thu, 5 Nov 1998 13:11:16 -0500
Mike Meanor
Wed, 4 Nov 1998 17:29:12 -0800
New Thread Vision Systems for inspection
Roland Jaquet
Wed, 11 Nov 1998 21:45:28 +0100
<>
Wed, 11 Nov 1998 14:09:21 -0600
<>
Wed, 11 Nov 1998 10:36:42 -0600
New Thread Visual Inspection of Misprinted boards after cleaning
<Mary Smoot>
Fri, 20 Nov 1998 08:41:11 -0500
<>
Wed, 18 Nov 1998 19:36:10 -0500
New Thread wage and rates for QA managers
Don Vischulis
Mon, 9 Nov 1998 21:49:04 -0600
<>
Mon, 9 Nov 1998 14:47:04 EST
New Thread Wanted: Motorola BGA
Scott Davies
Wed, 11 Nov 1998 09:51:00 -0500
New Thread wash mashine noise on assembly floor
<>
Fri, 13 Nov 1998 10:50:29 -0600
Graham Naisbitt
Fri, 13 Nov 1998 12:56:42 -0000
<>
Wed, 11 Nov 1998 13:56:59 -0600
Fikreta Jusufagic
Tue, 10 Nov 1998 17:25:18 -0800
New Thread Wave Solder Fixtures
Steve Hodgkinson
Wed, 11 Nov 1998 12:46:14 +0000
Mark Austin
Mon, 9 Nov 1998 12:25:00 +0000
Stephen R. Gregory
Sat, 7 Nov 1998 17:31:09 EST
DOUG BENEFIEL
Sat, 7 Nov 1998 00:34:20 -0800
Jim Gleason
Fri, 6 Nov 1998 19:26:49 -0600
<>
Sat, 7 Nov 1998 05:59:52 -0600
Valquirio N. Carvalho
Fri, 6 Nov 1998 19:00:38 -0500
Thomas C Han
Fri, 6 Nov 1998 15:05:58 -0800
Reginald Swipe
Fri, 6 Nov 1998 13:41:14 PST
New Thread Weird Wave Soldering Defect...
Paul Gould
Tue, 24 Nov 1998 18:24:26 -0000
Pratap Singh
Thu, 19 Nov 1998 21:20:42 -0800
KELLY M SCHRIVER
Tue, 17 Nov 1998 08:17:00 -0500
<Jason M. Smith>
Tue, 17 Nov 1998 07:55:50 -0500
Stephen R. Gregory
Mon, 16 Nov 1998 19:28:13 EST
Evan D Jones
Tue, 17 Nov 1998 11:05:35 +1000
Stephen R. Gregory
Mon, 16 Nov 1998 18:51:17 EST
New Thread Wet lamination
Terry Zhu
Tue, 17 Nov 1998 19:09:37 +0000
New Thread What happens when polarising occurs
Francis Lai
Sun, 29 Nov 1998 12:13:19 -0500
New Thread Wierd Wavesoldering defect
Kasprzak, Bill (esd) US
Tue, 17 Nov 1998 07:28:00 PST
New Thread Will insufficient solder cause high loss
Francis Lai
Sat, 21 Nov 1998 20:47:15 -0500
New Thread Working Environment Controls
Kenny Bloomquist
Mon, 9 Nov 1998 09:12:50 -0800
New Thread your mail
Lenny Kurup
Thu, 19 Nov 1998 10:41:10 -0500
New Thread your warning
Cobey Schmidt
Wed, 18 Nov 1998 08:57:47 -0600
Ian Squires
Wed, 18 Nov 1998 10:48:06 PST
Matthias Mansfeld
Wed, 18 Nov 1998 09:20:26 +0100
Vinit Verma
Wed, 18 Nov 1998 09:53:29 -0500
New Thread [Fwd: Solder-ball]
Tan Boon Kiat
Fri, 20 Nov 1998 21:53:09 +0800
Stephen R. Gregory
Tue, 10 Nov 1998 16:11:07 EST
Brian Koo
Tue, 10 Nov 1998 09:28:16 -0800
New Thread [TN] Annular Ring !
<Andy Slade>
Sat, 7 Nov 1998 07:57:37 -0500
New Thread [TN] Copper plating & Copper thickness
Roger Mouton
Wed, 11 Nov 1998 11:36:49 EST
New Thread [TN] Intermittent Dewetting
Mike Aldrich
Tue, 3 Nov 1998 15:53:46 -0500
New Thread [TN] Moisture Sensitive Devices
Jeff Perkins
Mon, 16 Nov 1998 08:03:18 -0500
New Thread [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS
Tan Boon Kiat
Fri, 20 Nov 1998 22:53:56 +0800
New Thread [TN] Re[2]: [TN] Re[2]: [TN] PCB ASSEMBLY COST ANALYSIS
Rafal Kozlowski
Fri, 20 Nov 1998 14:17:40 -0500
Rafael Delis
Fri, 20 Nov 1998 07:38:35 -0800
New Thread [TN] Soldering to Gold
Phillip E. Hinton
Sun, 29 Nov 1998 14:12:53 EST
New Thread [TN] Temp Profiling
Jeff Perkins
Thu, 12 Nov 1998 12:45:24 -0500
New Thread [TN] True Position and Registration on Fab
Jeff Perkins
Thu, 19 Nov 1998 08:05:35 -0500
New Thread [TN] Weird Wave Soldering Defect...
PELCHAT_JM
Wed, 18 Nov 1998 06:48:21 -0500
New Thread [TN] [Fwd: Solder-ball]
PELCHAT_JM
Wed, 11 Nov 1998 07:22:56 -0500

ATOM RSS1 RSS2