Subject: | |
From: | |
Reply To: | |
Date: | Sat, 28 Nov 1998 10:56:28 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
As far as I know Rogers has stopped actively marketing Bend/flex. There
was a fair amount of processing and reliability data available when we
marketed it out of the Circuit Materials Division in Arizona. I'm not
sure what happened after it went back to Connecticut, but there were
several long term customers for it that were continuing to be supported.
Basically it's a rigid board that can be folded to install. Very limited
unfolding/refolding for rework/repair is also possible. It was a product
that never really found a place in the market. It's not quite as capable
as flex, rigid flex, or rigid boards, so unless you really needed its
special combination of properties the standard interconnect solutions
were usually a better choice.
It's weakest characteristic was the non woven polyester fiber
reinforcement. Some care had to be exercised to prevent completely
destroying the laminate properties by inadvertently melting the fibers.
For more information try contacting:
Rogers Corporation
One Technology Drive
P.O. Box 188
Rogers, CT 06263-0188
Tel: 860 774-9605
FAX: 860 779-5509
For product information:
[log in to unmask]
Ask for Don Greene, and don't mention Bend/flex because the operator
used to filter those inquiries out.
Andy Magee
Flex Guru - Consulting
[log in to unmask]
(937) 425-3629
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|