DESIGNERCOUNCIL Archives

January 2004

DesignerCouncil@IPC.ORG
Options:

Subject

From

Date Sorted by Date, Most Recent First
Glue Dots for 0603 Chip Resistors
David Baldwin
Thu, 29 Jan 2004 15:39:37 -0700
low density connector
Billy Bharath
Thu, 29 Jan 2004 09:31:43 +0200
SNEC Mtg
Gary Ferrari
Wed, 28 Jan 2004 20:57:35 EST
Re: Test coupons for HDI Boards
David L. Wolf
Wed, 28 Jan 2004 11:13:28 -0600
Testcoupons for HDI Boards
Jeremias, Michael, ASP41
Wed, 28 Jan 2004 17:55:44 +0100
Re: looking for a connector
JHH
Wed, 28 Jan 2004 07:20:25 -0800
IPC Specifications for Flex Circuits
Thomas, Stephen
Wed, 28 Jan 2004 13:07:21 -0000
looking for a connector
Dee Stover
Tue, 27 Jan 2004 11:17:36 -0700
Re: Hole size for test points
Brooks,Bill
Tue, 27 Jan 2004 09:06:40 -0800
Re: Hole size for test points
Jilly & Andy
Mon, 26 Jan 2004 21:55:58 -0600
Re: Hole size for test points
JaMi Smith
Mon, 26 Jan 2004 19:28:07 -0800
Re: Trace width for 5 Amps
Brooks,Bill
Mon, 26 Jan 2004 12:16:42 -0800
Re: Trace width for 5 Amps
Louis Dallara
Mon, 26 Jan 2004 19:46:42 +0000
Re: Trace width for 5 Amps
Brooks,Bill
Mon, 26 Jan 2004 11:39:12 -0800
Re: Trace width for 5 Amps
Jack C. Olson
Mon, 26 Jan 2004 13:28:53 -0600
Re: Trace width for 5 Amps
Gary Ferrari
Mon, 26 Jan 2004 14:24:30 EST
Trace width for 5 Amps
Louis Dallara
Mon, 26 Jan 2004 19:07:31 +0000
Re: Blind Vias
Happy Holden
Mon, 26 Jan 2004 09:59:20 -0500
Re: Blind Vias
Robert M. Wolfe
Sat, 24 Jan 2004 11:12:58 -0500
Re: Blind Vias
Rex Dalipe
Sat, 24 Jan 2004 12:49:12 +0800
Re: Blind Vias
Jeff Seeger
Fri, 23 Jan 2004 20:43:36 -0500
Re: Blind Vias
Kowalewski, Andy
Fri, 23 Jan 2004 16:44:27 -0600
Re: Blind Vias
Kowalewski, Andy
Fri, 23 Jan 2004 16:17:42 -0600
Re: Blind Vias
Happy Holden
Fri, 23 Jan 2004 16:53:42 -0500
Re: Blind Vias
Ron Olinyk
Fri, 23 Jan 2004 15:43:22 -0600
Re: Blind Vias
Steve Smith
Fri, 23 Jan 2004 15:46:51 -0500
Re: Blind Vias
<>
Fri, 23 Jan 2004 12:26:24 -0800
Re: Blind Vias
Kowalewski, Andy
Fri, 23 Jan 2004 14:10:41 -0600
Re: Blind Vias
Brooks,Bill
Fri, 23 Jan 2004 12:03:31 -0800
Re: Blind Vias
Mark Larson
Fri, 23 Jan 2004 14:01:52 -0600
Re: Blind Vias
Susy Webb
Fri, 23 Jan 2004 13:49:21 -0600
Re: Blind Vias
<>
Fri, 23 Jan 2004 08:57:11 -0800
Re: Blind Vias
Brooks,Bill
Fri, 23 Jan 2004 08:38:02 -0800
Re: Prototype manufacturer
Brooks,Bill
Fri, 23 Jan 2004 08:31:09 -0800
Re: Prototype manufacturer
Brooks,Bill
Fri, 23 Jan 2004 08:28:01 -0800
Re: Prototype manufacturer
Happy Holden
Fri, 23 Jan 2004 09:45:15 -0500
Prototype manufacturer
Rex Dalipe
Fri, 23 Jan 2004 19:06:45 +0800
Re: Component stack up / is it OK?
Richard
Thu, 22 Jan 2004 08:37:03 -0800
Re: Component stack up / is it OK?
Brooks,Bill
Wed, 21 Jan 2004 09:07:33 -0800
Re: Component stack up / is it OK?
Matthew Lamkin
Wed, 21 Jan 2004 16:29:16 -0000
Job Opening PCB Designer NE Ohio
John Wheeler
Wed, 21 Jan 2004 10:11:26 -0600
Re: Component stack up / is it OK?
Jean Cayer
Wed, 21 Jan 2004 09:22:30 -0500
Re: Component stack up / is it OK?
Mario Irigoyen
Wed, 21 Jan 2004 07:29:55 -0600
Component stack up / is it OK?
Richard
Wed, 21 Jan 2004 01:43:40 -0800
Re: Hole size for test points
Brooks,Bill
Tue, 20 Jan 2004 11:20:29 -0800
Re: Hole size for test points
<>
Tue, 20 Jan 2004 14:00:33 EST
Re: Hole size for test points
Ron Olinyk
Tue, 20 Jan 2004 12:47:42 -0600
Re: Hole size for test points
Brooks,Bill
Tue, 20 Jan 2004 10:19:48 -0800
Re: Hole size for test points
Brand, Rodney
Tue, 20 Jan 2004 13:10:10 -0500
CID & CID+ Certification comes to Indianapolis, IN
Nick Ban
Tue, 20 Jan 2004 11:51:54 -0600
Re: Hole size for test points
Kowalewski, Andy
Tue, 20 Jan 2004 11:33:59 -0600
Re: Hole size for test points
Brooks,Bill
Tue, 20 Jan 2004 09:16:14 -0800
Re: Hole size for test points
<>
Tue, 20 Jan 2004 12:02:41 EST
Re: Hole size for test points
<>
Tue, 20 Jan 2004 12:00:35 EST
Re: Hole size for test points
Scott McCurdy
Tue, 20 Jan 2004 08:50:38 -0800
Re: Hole size for test points
Brooks,Bill
Tue, 20 Jan 2004 08:37:31 -0800
Re: Hole size for test points
<>
Tue, 20 Jan 2004 07:46:28 -0500
IPC/DC Greater Boston mtg, 29-Jan-04
Jeff Seeger
Mon, 19 Jan 2004 17:55:41 -0500
Re: Hole size for test points
Brooks,Bill
Mon, 19 Jan 2004 10:23:59 -0800
Re: Hole size for test points
Brooks,Bill
Mon, 19 Jan 2004 08:56:53 -0800
Re: Hole size for test points
Roger Stoops
Mon, 19 Jan 2004 09:20:36 -0500
Re: Hole size for test points
JaMi Smith
Fri, 16 Jan 2004 17:53:09 -0800
Re: Hole size for test points
Brooks,Bill
Fri, 16 Jan 2004 13:34:18 -0800
Re: Hole size for test points
JaMi Smith
Fri, 16 Jan 2004 12:10:03 -0800
Re: Hole size for test points
Leslie Gomez
Fri, 16 Jan 2004 11:24:15 -0800
Re: Hole size for test points
Bissonnette, Jean-Francois
Fri, 16 Jan 2004 13:53:13 -0500
Re: Hole size for test points
Brooks,Bill
Fri, 16 Jan 2004 10:46:15 -0800
Re: Hole size for test points
Brooks,Bill
Fri, 16 Jan 2004 10:41:24 -0800
Re: Hole size for test points
Brooks,Bill
Fri, 16 Jan 2004 09:16:21 -0800
Re: Layer names
Kowalewski, Andy
Fri, 16 Jan 2004 08:14:09 -0600
Hole size for test points
Bissonnette, Jean-Francois
Fri, 16 Jan 2004 09:02:18 -0500
Re: Layer names
Steve Smith
Fri, 16 Jan 2004 08:42:15 -0500
Layer names
M.H.B. Tettero (LT)
Fri, 16 Jan 2004 10:26:32 +0100
Re: PCB Material
JaMi Smith
Thu, 15 Jan 2004 12:41:33 -0800
High power applications board material
Mark Larson
Wed, 14 Jan 2004 10:31:33 -0600
PCB Material
Mike Huffman
Mon, 12 Jan 2004 15:27:37 -0500
Re: IPC 7351 new smd landpatterns > IPC-782 demise.
Mark Larson
Fri, 9 Jan 2004 11:05:48 -0600
Re: IPC 7351 new smd landpatterns > IPC-782 demise.
Gary Ferrari
Fri, 9 Jan 2004 11:07:49 EST
Re: IPC 7351 new smd landpatterns > IPC-782 demise.
Matthew Lamkin
Fri, 9 Jan 2004 15:59:28 -0000
Re: IPC 7351 new smd landpatterns > IPC-782 demise.
Roger Stoops
Fri, 9 Jan 2004 10:30:33 -0500
Re: IPC 7351 new smd landpatterns > IPC-782 demise.
Matthew Lamkin
Fri, 9 Jan 2004 08:12:13 -0000
Re: FW: Meeting Announcement - SD Chapter of the IPC DCl - RSVP by Mo nday Jan 26th
<>
Thu, 8 Jan 2004 15:01:10 -0800
FW: Meeting Announcement - SD Chapter of the IPC DCl - RSVP by Mo nday Jan 26th
Brooks,Bill
Thu, 8 Jan 2004 14:47:17 -0800
Re: IPC 7351 new smd lanpatterns
Gary Ferrari
Thu, 8 Jan 2004 17:35:32 EST
Re: IPC 7351 new smd lanpatterns
Louis Dallara
Thu, 8 Jan 2004 22:15:43 +0000
Re: IPC 7351 new smd lanpatterns
Ray Johnston
Thu, 8 Jan 2004 10:43:16 -0800
Re: IPC 7351 new smd lanpatterns
Mark Larson
Thu, 8 Jan 2004 11:32:21 -0600
AW: [DC] IPC 7351 new smd lanpatterns
Jeremias, Michael, ASP41
Thu, 8 Jan 2004 11:36:40 +0100
Re: IPC 7351 new smd lanpatterns
Matthew Lamkin
Thu, 8 Jan 2004 10:28:04 -0000
Re: IPC 7351 new smd lanpatterns
<>
Wed, 7 Jan 2004 13:48:03 -0800
Re: IPC 7351 new smd lanpatterns
Ted Tontis, C.I.D.
Wed, 7 Jan 2004 13:33:26 -0600
FW: Meeting Announcement - SD Chapter of the IPC Designers Counci l - RSVP by Monday Jan 26th
Brooks,Bill
Wed, 7 Jan 2004 11:29:16 -0800
Re: IPC 7351 new smd lanpatterns
Tempea, Ioan
Wed, 7 Jan 2004 14:17:09 -0500
IPC 7351 new smd lanpatterns
Mark Larson
Wed, 7 Jan 2004 12:53:59 -0600
Meeting Announcement - Pacific Northwest Chapter
<>
Mon, 5 Jan 2004 14:13:38 -0800
Re: Plated through holes
Brand, Rodney
Mon, 5 Jan 2004 16:13:12 -0500
Re: Plated through holes
Andre Demers
Mon, 5 Jan 2004 15:56:03 -0500
Meeting Announcement: SIlicon Valley Chapter (Jan. 13)
Bob McCreight
Mon, 5 Jan 2004 08:30:23 -0800
Re: Plated through holes
<>
Mon, 5 Jan 2004 08:25:34 -0800
Plated through holes
Fred Dark
Fri, 2 Jan 2004 12:57:37 -0500

ATOM RSS1 RSS2