LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Steve Owen

Tue, 15 Oct 2002 11:54:09 +0100

Peter Swanson

Tue, 15 Oct 2002 09:19:55 +0100

Mike Fenner

Tue, 15 Oct 2002 09:02:16 +0100

Klaus Unmuessig

Tue, 15 Oct 2002 09:42:37 +0200

Edward Szpruch

Tue, 15 Oct 2002 09:35:26 +0200

(OT) Cell phones...

Steve Gregory

Wed, 9 Oct 2002 00:24:21 EDT

Phil Nutting

Tue, 8 Oct 2002 16:42:37 -0400

Randy Bock Sr.

Tue, 8 Oct 2002 14:39:09 -0400

Tim Reeves

Tue, 8 Oct 2002 09:46:29 -0700

Dan R. Johnson

Tue, 8 Oct 2002 09:33:07 -0700

Keel, Mike

Mon, 7 Oct 2002 11:27:21 -0700

Randy Bock Sr.

Mon, 7 Oct 2002 13:28:25 -0400

Randy Bock Sr.

Mon, 7 Oct 2002 12:55:50 -0400

Bloomquist, Ken

Mon, 7 Oct 2002 08:16:40 -0700

Franklin D Asbell

Mon, 7 Oct 2002 09:46:05 -0500

joyce

Mon, 7 Oct 2002 08:38:15 -0400

Thi Pham

Mon, 7 Oct 2002 07:55:08 -0400

Jim Lamb

Sun, 6 Oct 2002 21:14:51 -0700

Mon, 7 Oct 2002 08:06:11 +0800

2 [TN] Undercut peeling on all Gold Board

David Douthit

Sat, 5 Oct 2002 07:03:43 -0700

(OT) Cell phones...

Steve Gregory

Fri, 4 Oct 2002 21:03:56 EDT

Re: 2 [TN] Undercut peeling on all Gold Board

Barmuta, Mike

Fri, 11 Oct 2002 13:17:07 -0700

Tue, 15 Oct 2002 08:27:34 +0200

Acetone Test for Solder Mask

Tim Reeves

Wed, 30 Oct 2002 09:08:01 -0800

Brian Ellis

Wed, 30 Oct 2002 13:21:40 +0200

Edward Szpruch

Wed, 30 Oct 2002 10:26:30 +0200

Brian Ellis

Wed, 30 Oct 2002 09:53:10 +0200

Don Vischulis

Tue, 29 Oct 2002 15:43:16 -0600

Tue, 29 Oct 2002 16:39:49 EST

Don Vischulis

Tue, 29 Oct 2002 15:33:45 -0600

Genny Gibbard

Tue, 29 Oct 2002 15:03:10 -0600

Don Vischulis

Tue, 29 Oct 2002 13:54:32 -0600

Morse, Carrie

Tue, 29 Oct 2002 14:53:42 -0500

Acetone Test for Solder Mask

Bev Christian

Tue, 29 Oct 2002 14:19:10 -0500

Morse, Carrie

Tue, 29 Oct 2002 14:07:57 -0500

Advantages of 2113 over 7629

Re: Advantages of 2113 over 7629

Tim Reeves

Thu, 3 Oct 2002 11:27:01 -0700

Advantages of 2113 over 7629

Franklin D Asbell

Wed, 2 Oct 2002 16:03:01 -0500

Alternative Finishes To Tin/Lead

Werner Engelmaier

Fri, 4 Oct 2002 15:00:28 EDT

Kane, Joseph

Fri, 4 Oct 2002 09:15:53 -0400

Dan R. Johnson

Thu, 3 Oct 2002 09:30:24 -0700

Wenger, George M.

Thu, 3 Oct 2002 14:46:07 -0500

Werner Engelmaier

Thu, 3 Oct 2002 12:45:54 EDT

Adair, Bret

Thu, 3 Oct 2002 08:52:42 -0700

Alternative Finishes To Tin/Lead

Victor Hernandez

Thu, 3 Oct 2002 10:48:27 -0500

Kane, Joseph

Thu, 3 Oct 2002 09:27:28 -0400

Back to back BGAs

Re: Back to back BGAs

Dave Hicks

Wed, 30 Oct 2002 16:59:10 -0500

Re: Back to back BGAs

Rey Sosa

Wed, 30 Oct 2002 09:19:59 -0800

Back to back BGAs

Tempea, Ioan

Wed, 30 Oct 2002 11:38:55 -0500

Benchmarking

Re: Benchmarking

Mark Orlowski

Mon, 7 Oct 2002 14:48:21 -0500

Re: Benchmarking

Peter Swanson

Fri, 4 Oct 2002 19:02:36 +0100

BGA ball fracture...

Re: BGA ball fracture...

Charlie McMahon

Fri, 18 Oct 2002 11:46:38 -0400

BGA ball fracture...

Steve Gregory

Fri, 18 Oct 2002 11:38:03 EDT

board bake?

Daan Terstegge

Wed, 23 Oct 2002 20:53:40 +0200

Rick Thompson

Wed, 23 Oct 2002 11:29:00 -0700

Dave Chapman

Wed, 23 Oct 2002 13:30:12 -0500

Franklin D Asbell

Wed, 23 Oct 2002 13:14:43 -0500

Re: board shop capability

Steve Gregory

Wed, 23 Oct 2002 14:13:49 EDT

board bake?

Graham Collins

Wed, 23 Oct 2002 14:06:25 -0400

board shop capability

Thu, 3 Oct 2002 08:06:49 +0800

Re: board shop capability

Don Vischulis

Wed, 2 Oct 2002 13:58:34 -0500

board shop capability

Wed, 2 Oct 2002 11:45:56 EDT

Board shop capability doc

Re: Board shop capability doc

Victor Hernandez

Tue, 1 Oct 2002 08:55:39 -0500

chip outs

Re: chip outs

Bill Wesmoreland

Wed, 9 Oct 2002 15:33:07 -0500

chip outs

Mary Jane Chism

Wed, 9 Oct 2002 10:27:43 -0500

CI Calculator

Re: CI Calculator

Crepeau, Phil

Thu, 31 Oct 2002 15:50:09 -0800

CI Calculator

Kathy Bergman

Thu, 31 Oct 2002 14:31:48 -0800

Clean room.

Re: Clean room.

Sat, 12 Oct 2002 13:42:57 +0530

Re: Clean room.

Randy Bock Sr.

Fri, 11 Oct 2002 12:35:15 -0400

Re: Clean room.

Brummer Chuck

Fri, 11 Oct 2002 07:54:41 -0700

Clean room.

Mike Holst.

Fri, 11 Oct 2002 12:53:53 +0200

Cleanliness Testing - When is it clean enough?

Virgil Lenton

Wed, 23 Oct 2002 10:33:40 -0600

joyce

Wed, 23 Oct 2002 07:53:18 -0400

joyce

Wed, 23 Oct 2002 07:44:32 -0400

Brian Ellis

Wed, 23 Oct 2002 11:01:24 +0300

Jack Crawford

Tue, 22 Oct 2002 17:38:41 -0500

Tue, 22 Oct 2002 16:42:42 -0500

Charlie Pitarys

Tue, 22 Oct 2002 16:43:10 -0400

Kathy Kuhlow

Tue, 22 Oct 2002 14:56:18 -0500

Halas, Mirka

Tue, 22 Oct 2002 15:52:53 -0400

Charlie Pitarys

Tue, 22 Oct 2002 15:45:41 -0400

Tue, 22 Oct 2002 13:43:09 -0500

Cleanliness Testing - When is it clean enough?

Brian Ellis

Tue, 22 Oct 2002 19:12:36 +0300

Virgil Lenton

Tue, 22 Oct 2002 09:55:55 -0500

Co planarity spec for components

Malewicz Wesley

Wed, 2 Oct 2002 10:09:44 -0400

component spacing

Bill Wesmoreland

Tue, 8 Oct 2002 16:30:41 -0500

Sammie Sutton

Tue, 8 Oct 2002 13:45:21 -0700

Leo Lambert

Tue, 8 Oct 2002 15:35:05 -0400

Dave Chapman

Tue, 8 Oct 2002 13:28:14 -0500

conductor cut: IPC-7721

Thu, 17 Oct 2002 08:35:03 +0800

Morse, Carrie

Wed, 16 Oct 2002 15:15:38 -0400

Randy Bock Sr.

Wed, 16 Oct 2002 12:40:18 -0400

Charles Caswell

Wed, 16 Oct 2002 11:25:44 -0500

Conformal Coating Spec : MS-472N

David Douthit

Wed, 16 Oct 2002 09:15:47 -0700

conductor cut: IPC-7721

Bissonnette, Jean-Francois

Wed, 16 Oct 2002 09:55:30 -0400

Re: Conformal Coating Spec : MS-472N

Chris Almeras

Mon, 7 Oct 2002 15:24:45 -0500

Conformal Coating Spec : MS-472N

Lim, Chee How

Mon, 7 Oct 2002 12:07:13 -0400

Connectors

Dehoyos, Ramon

Fri, 18 Oct 2002 05:48:21 -0700

Copper distribution

Wed, 16 Oct 2002 15:51:58 EDT

Re: Copper distribution

Wed, 9 Oct 2002 20:43:50 EDT

Copper distribution

Rudy Sedlak

Wed, 9 Oct 2002 16:11:58 EDT

definition question

Tim Reeves

Thu, 10 Oct 2002 08:42:47 -0700

Mcmaster, Michael

Wed, 9 Oct 2002 16:43:22 -0700

joyce

Wed, 9 Oct 2002 13:09:49 -0400

John Parsons

Wed, 9 Oct 2002 10:12:43 -0700

Charles Caswell

Wed, 9 Oct 2002 12:01:50 -0500

definition question - rephrased

Crepeau, Phil

Wed, 9 Oct 2002 07:25:43 -0700

definition question

JaMi Smith

Tue, 8 Oct 2002 22:43:44 -0700

Re: definition question - rephrased

JaMi Smith

Wed, 9 Oct 2002 12:31:31 -0700

Dimensional stability

Re: Dimensional stability

Geoff Layhe

Tue, 29 Oct 2002 16:00:28 -0000

Re: Dimensional stability

Jonathan C Whitcomb

Tue, 29 Oct 2002 09:19:30 -0500

Re: Dimensional stability

Geoff Layhe

Tue, 29 Oct 2002 13:05:59 -0000

Dimensional stability

Tue, 29 Oct 2002 15:03:43 +0530

Dispenser Solder Paste (small sources)

Re: Dispenser Solder Paste (small sources)

Duane Shreve

Mon, 28 Oct 2002 11:42:18 -0700

Re: Dispenser Solder Paste (small sources)

WEEKES, MICHAEL HS-SNS

Mon, 28 Oct 2002 07:59:01 -0500

Dispenser Solder Paste (small sources)

Franck, George

Fri, 25 Oct 2002 15:26:47 -0400

Dissolution Rate of Tin

Re: Dissolution Rate of Tin

Tue, 29 Oct 2002 17:13:42 EST

Re: Dissolution Rate of Tin

Werner Engelmaier

Tue, 29 Oct 2002 13:11:48 EST

Re: Dissolution Rate of Tin

Dave Hillman

Tue, 29 Oct 2002 12:05:57 -0600

Dissolution Rate of Tin

rgrant

Tue, 29 Oct 2002 09:08:01 -0700

do-ray

Re: do-ray

Jason W. Gregory

Tue, 15 Oct 2002 19:59:48 -0500

Re: do-ray

Wed, 16 Oct 2002 07:56:59 +0800

do-ray

Mauro, Dan

Tue, 15 Oct 2002 09:40:36 -0400

DRAWING NOMINAL

Randy Bock Sr.

Fri, 11 Oct 2002 08:40:22 -0400

David Ricketts

Thu, 10 Oct 2002 18:43:44 -0700

Bresnan, Thomas

Thu, 10 Oct 2002 16:46:09 -0700

Crepeau, Phil

Thu, 10 Oct 2002 16:04:27 -0700

Dan R. Johnson

Thu, 10 Oct 2002 15:06:26 -0700

Don Vischulis

Thu, 10 Oct 2002 15:41:40 -0500

drilling hole for thermo-profile

rgrant

Thu, 10 Oct 2002 13:38:03 -0600

DRAWING NOMINAL

Thu, 10 Oct 2002 14:44:11 -0400

Re: drilling hole for thermo-profile

Guy Ramsey

Thu, 24 Oct 2002 15:30:21 -0400

Re: drilling hole for thermo-profile

Dehoyos, Ramon

Wed, 23 Oct 2002 06:20:15 -0700

drilling hole for thermo-profile

Tobias.Chang

Tue, 22 Oct 2002 15:36:08 -0400

Dross on Solder Pot

Dieselberg, Ron

Mon, 28 Oct 2002 07:23:04 -0500

Dehoyos, Ramon

Fri, 25 Oct 2002 06:19:31 -0700

Atkinson, Neil

Fri, 25 Oct 2002 07:16:25 +0100

Charles Caswell

Thu, 24 Oct 2002 17:53:58 -0500

tony steinke

Thu, 24 Oct 2002 16:12:44 -0700

Hogg, Blair K.

Thu, 24 Oct 2002 15:37:47 -0400

Steve Gregory

Thu, 24 Oct 2002 10:57:45 EDT

Charles Caswell

Thu, 24 Oct 2002 09:25:19 -0500

Leo Lambert

Thu, 24 Oct 2002 08:22:47 -0400

Phil Nutting

Thu, 24 Oct 2002 08:26:36 -0400

Charles Caswell

Wed, 23 Oct 2002 20:35:10 -0500

Steve Gregory

Wed, 23 Oct 2002 19:26:31 EDT

Dross particles sticking to soldermask...

Crepeau, Phil

Wed, 23 Oct 2002 14:50:02 -0700

Dross on Solder Pot

Hogg, Blair K.

Wed, 23 Oct 2002 17:27:29 -0400

Mike Fenner

Fri, 11 Oct 2002 10:12:18 +0100

Brian Ellis

Fri, 11 Oct 2002 11:07:54 +0300

Barmuta, Mike

Thu, 10 Oct 2002 16:22:39 -0700

Steve Gregory

Thu, 10 Oct 2002 19:17:42 EDT

Guy Ramsey

Thu, 10 Oct 2002 18:14:27 -0400

joyce

Thu, 10 Oct 2002 16:08:44 -0400

Steve Gregory

Thu, 10 Oct 2002 15:00:26 EDT

Barmuta, Mike

Thu, 10 Oct 2002 11:30:48 -0700

Steve Gregory

Thu, 10 Oct 2002 12:39:10 EDT

Gene Felder

Thu, 10 Oct 2002 09:16:03 -0700

Dross particles sticking to soldermask...

Barmuta, Mike

Thu, 10 Oct 2002 08:51:39 -0700

Steve Gregory

Thu, 10 Oct 2002 09:58:08 EDT

dross sticking on laminate

Tostevin, Bruce

Tue, 15 Oct 2002 10:25:44 -0500

Dross sticking to soldermask...

Steve Gregory

Fri, 11 Oct 2002 09:56:45 EDT

Dry- Ovens

Zweigart, Siegmund

Wed, 30 Oct 2002 08:34:04 +0100

Dryfilm Adhesion

Greg Triggs

Wed, 23 Oct 2002 08:31:45 -0700

DTS

Re: DTS

Randy Bock Sr.

Thu, 31 Oct 2002 15:23:58 -0500

Re: DTS

Kathy Kuhlow

Thu, 31 Oct 2002 13:02:00 -0600

DTS

Randy Bock Sr.

Thu, 31 Oct 2002 13:22:02 -0500

Dual footprint on Stacked Memories

Eric Castonguay

Wed, 2 Oct 2002 16:52:12 -0400

Willie Duersch

Wed, 2 Oct 2002 08:09:03 -0600

Steve Gregory

Tue, 1 Oct 2002 21:50:05 EDT

Dual footprint on Stacked Memories

Tempea, Ioan

Tue, 1 Oct 2002 20:18:59 -0400

Eric Castonguay

Tue, 1 Oct 2002 17:05:24 -0500

edge clip for hybrid

Re: edge clip for hybrid

Ed Popielarski

Mon, 30 Sep 2002 22:08:47 -0700

Edge connector

Re: Edge connector

Joe Fjelstad

Sun, 20 Oct 2002 14:10:23 EDT

Edge connector

Marki Sasportas

Sun, 20 Oct 2002 12:07:13 +0200

EMI Sheilding

Brooks,Bill

Wed, 2 Oct 2002 09:33:15 -0700

Brooks,Bill

Wed, 2 Oct 2002 08:40:27 -0700

Randy Bock Sr.

Wed, 2 Oct 2002 08:23:26 -0400

Dave Hornback

Tue, 1 Oct 2002 16:45:54 -0700

ESD compliant document holders for travelers

Guy Ramsey

Tue, 1 Oct 2002 17:08:06 -0400

EMI Sheilding

Ken Carlile

Tue, 1 Oct 2002 14:27:17 -0500

EMI Shielding

Re: EMI Shielding

Genny Gibbard

Wed, 2 Oct 2002 10:02:02 -0600

ERSA BGA Rework System

Rick Thompson

Thu, 10 Oct 2002 07:40:00 -0700

Re: ESD compliant document holders for travelers

Dan R. Johnson

Thu, 3 Oct 2002 12:00:44 -0700

Re: ESD compliant document holders for travelers

Randy Bock Sr.

Thu, 3 Oct 2002 14:38:25 -0400

Re: ESD compliant document holders for travelers

Steve Thomas

Thu, 3 Oct 2002 09:44:00 -0700

ESD compliant document holders for travelers

Phil Nutting

Thu, 3 Oct 2002 11:57:21 -0400

ESD floor wax

Gene Felder

Thu, 31 Oct 2002 09:31:12 -0800

Genny Gibbard

Thu, 31 Oct 2002 11:21:54 -0600

Steve Thomas

Thu, 31 Oct 2002 09:09:32 -0800

Charles Caswell

Thu, 31 Oct 2002 10:40:56 -0600

ESD floor wax

Phil Nutting

Thu, 31 Oct 2002 11:16:33 -0500

ESD ISSUE

Dieselberg, Ron

Wed, 2 Oct 2002 10:35:15 -0400

Gene Felder

Thu, 3 Oct 2002 08:48:32 -0700

Randy Bock Sr.

Thu, 3 Oct 2002 11:20:38 -0400

Genny Gibbard

Thu, 3 Oct 2002 08:53:33 -0600

Hogg, Blair K.

Thu, 3 Oct 2002 10:32:10 -0400

Randy Bock Sr.

Thu, 3 Oct 2002 08:49:32 -0400

Kane, Joseph

Thu, 3 Oct 2002 08:22:19 -0400

joyce

Thu, 3 Oct 2002 07:59:56 -0400

Willie Duersch

Wed, 2 Oct 2002 16:21:41 -0600

Genny Gibbard

Wed, 2 Oct 2002 14:30:06 -0600

Don Vischulis

Wed, 2 Oct 2002 14:28:05 -0500

Gregg Klawson

Wed, 2 Oct 2002 13:51:14 -0400

Guy Ramsey

Wed, 2 Oct 2002 10:51:20 -0400

ESD ISSUE - bare skin with static straps

Dieselberg, Ron

Wed, 2 Oct 2002 10:35:15 -0400

ESD ISSUE

Marsico, James

Wed, 2 Oct 2002 08:00:16 -0400

Dan R. Johnson

Tue, 8 Oct 2002 08:04:57 -0700

Charles Caswell

Fri, 4 Oct 2002 07:10:50 -0500

Fri, 4 Oct 2002 09:22:41 +0800

Dan R. Johnson

Thu, 3 Oct 2002 15:42:00 -0700

Hogg, Blair K.

Thu, 3 Oct 2002 15:11:15 -0400

FAB - Controlled Capacitance

Gene Felder

Thu, 3 Oct 2002 10:30:08 -0700

Re: FAB - Controlled Capacitance

John Parsons

Thu, 31 Oct 2002 14:56:54 -0800

Re: FAB - Controlled Capacitance

Karl Sauter

Thu, 31 Oct 2002 14:34:57 -0800

Re: FAB - Controlled Capacitance

Leon Heller

Thu, 31 Oct 2002 22:06:34 +0000

FAB - Controlled Capacitance

John Parsons

Thu, 31 Oct 2002 11:39:38 -0800

Face Mask vs. Nose Guard

Re: Face Mask vs. Nose Guard

Steve Thomas

Tue, 22 Oct 2002 11:49:38 -0700

Face Mask vs. Nose Guard

Glenn Pelkey

Tue, 22 Oct 2002 11:33:16 -0700

Fibre Optic

Re: Fibre Optic

joyce

Tue, 15 Oct 2002 09:37:38 -0400

Re: Fibre Optic

Higgins Leo

Tue, 15 Oct 2002 02:20:27 -0400

Fibre Optic

Ong Seet Leng

Tue, 15 Oct 2002 08:50:24 +0800

First Article Buy-off Process for SMT & Wave Solder

Re: First Article Buy-off Process for SMT & Wave Solder

Steve Thomas

Thu, 10 Oct 2002 09:03:05 -0700

Re: First Article Buy-off Process for SMT & Wave Solder

Dan R. Johnson

Thu, 10 Oct 2002 08:00:03 -0700

Re: First Article Buy-off Process for SMT & Wave Solder

Croslin, Robert

Thu, 10 Oct 2002 08:26:40 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Eric Dawson

Thu, 10 Oct 2002 08:19:21 +0100

Re: First Article Buy-off Process for SMT & Wave Solder

Steve Gregory

Wed, 9 Oct 2002 22:15:49 EDT

Re: First Article Buy-off Process for SMT & Wave Solder

Thu, 10 Oct 2002 09:40:30 +0800

Re: First Article Buy-off Process for SMT & Wave Solder

Thu, 10 Oct 2002 08:38:49 +0800

Re: First Article Buy-off Process for SMT & Wave Solder

Jason W. Gregory

Wed, 9 Oct 2002 17:04:32 -0500

Re: First Article Buy-off Process for SMT & Wave Solder

Jason W. Gregory

Wed, 9 Oct 2002 16:56:59 -0500

Re: First Article Buy-off Process for SMT & Wave Solder

Dan R. Johnson

Wed, 9 Oct 2002 14:57:24 -0700

Re: First Article Buy-off Process for SMT & Wave Solder

Steve Gregory

Wed, 9 Oct 2002 16:45:47 EDT

Re: First Article Buy-off Process for SMT & Wave Solder

Crepeau, Phil

Wed, 9 Oct 2002 12:50:24 -0700

Re: First Article Buy-off Process for SMT & Wave Solder

Croslin, Robert

Wed, 9 Oct 2002 14:43:31 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Randy Bock Sr.

Wed, 9 Oct 2002 14:32:24 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Casto, Vicki

Wed, 9 Oct 2002 12:50:36 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Dan R. Johnson

Wed, 9 Oct 2002 09:52:46 -0700

Re: First Article Buy-off Process for SMT & Wave Solder

Poh Kong Hui

Wed, 9 Oct 2002 23:15:05 +0800

Re: First Article Buy-off Process for SMT & Wave Solder

Steve Thomas

Wed, 9 Oct 2002 08:14:40 -0700

Re: First Article Buy-off Process for SMT & Wave Solder

Randy Bock Sr.

Wed, 9 Oct 2002 11:14:26 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Randy Bock Sr.

Wed, 9 Oct 2002 09:33:35 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Hogg, Blair K.

Wed, 9 Oct 2002 08:42:23 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Croslin, Robert

Wed, 9 Oct 2002 08:12:46 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Steve Gregory

Tue, 8 Oct 2002 23:41:00 EDT

Re: First Article Buy-off Process for SMT & Wave Solder

Wed, 9 Oct 2002 08:25:33 +0800

Re: First Article Buy-off Process for SMT & Wave Solder

rgrant

Tue, 8 Oct 2002 17:11:02 -0600

Re: First Article Buy-off Process for SMT & Wave Solder

Steve Thomas

Tue, 8 Oct 2002 14:17:32 -0700

Re: First Article Buy-off Process for SMT & Wave Solder

rgrant

Tue, 8 Oct 2002 14:01:46 -0600

Re: First Article Buy-off Process for SMT & Wave Solder

Morse, Carrie

Tue, 8 Oct 2002 15:36:37 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Tue, 8 Oct 2002 11:54:50 -0600

Re: First Article Buy-off Process for SMT & Wave Solder

Duane Shreve

Tue, 8 Oct 2002 13:00:30 -0600

Re: First Article Buy-off Process for SMT & Wave Solder

Kathy Kuhlow

Tue, 8 Oct 2002 13:36:14 -0500

Re: First Article Buy-off Process for SMT & Wave Solder

Croslin, Robert

Tue, 8 Oct 2002 14:15:33 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Dave Hornback

Tue, 8 Oct 2002 10:59:56 -0700

Re: First Article Buy-off Process for SMT & Wave Solder

Randy Bock Sr.

Tue, 8 Oct 2002 13:53:09 -0400

Re: First Article Buy-off Process for SMT & Wave Solder

Steve Thomas

Tue, 8 Oct 2002 10:37:58 -0700

First Article Buy-off Process for SMT & Wave Solder

Poh Kong Hui

Tue, 8 Oct 2002 23:53:33 +0800

Fitting question

Phil Nutting

Thu, 3 Oct 2002 15:53:11 -0400

Flammability

Tim Reeves

Fri, 25 Oct 2002 11:36:20 -0700

Tue, 22 Oct 2002 08:46:15 +0800

Mike Fenner

Mon, 21 Oct 2002 15:22:44 +0100

Brian Ellis

Mon, 21 Oct 2002 17:25:44 +0300

Eric Dawson

Mon, 21 Oct 2002 14:59:25 +0100

Mon, 21 Oct 2002 08:56:17 -0500

Don Vischulis

Mon, 21 Oct 2002 08:46:21 -0500

Rudy Sedlak

Mon, 21 Oct 2002 09:34:39 EDT

Randy Bock Sr.

Mon, 21 Oct 2002 09:35:12 -0400

Flammability

Mon, 21 Oct 2002 08:07:35 -0500

Flex Cable Material

Re: Flex Cable Material

Croslin, Robert

Fri, 18 Oct 2002 14:31:03 -0400

Re: Flex Cable Material

Joe Fjelstad

Fri, 18 Oct 2002 13:53:45 EDT

Re: Flex Cable Material

Roger Stoops

Fri, 18 Oct 2002 12:56:39 -0400

Flex Cable Material

Croslin, Robert

Fri, 18 Oct 2002 12:49:21 -0400

Flying Probe Testers...

Jowan Iven

Mon, 21 Oct 2002 07:51:21 +0200

Steve Gregory

Fri, 18 Oct 2002 16:29:38 EDT

Fri, 18 Oct 2002 14:05:31 -0600

Jim Axton

Fri, 18 Oct 2002 13:16:02 -0700

Jim Axton

Fri, 18 Oct 2002 13:13:51 -0700

Erat, Wolfgang

Fri, 18 Oct 2002 15:52:10 -0400

Fineline Circuits, Inc.

Sat, 19 Oct 2002 15:50:37 -0700

Hogg, Blair K.

Fri, 18 Oct 2002 14:56:14 -0400

Fri, 18 Oct 2002 12:26:06 -0600

Flying Probe Testers...

Steve Gregory

Fri, 18 Oct 2002 14:11:55 EDT

Focussed Cleaner

Re: Focussed Cleaner

Phil Nutting

Wed, 30 Oct 2002 10:49:00 -0500

Re: Focussed Cleaner

Brian Ellis

Wed, 30 Oct 2002 17:29:49 +0200

Focussed Cleaner

Wed, 30 Oct 2002 09:07:21 -0600

Gold Embrittlement

Mike Fenner

Wed, 9 Oct 2002 17:39:56 +0100

Mel Parrish

Mon, 7 Oct 2002 16:35:07 -0500

Brian Toleno

Mon, 7 Oct 2002 09:40:02 -0700

George Milad

Fri, 4 Oct 2002 20:05:42 EDT

Re: Golden Pin Connectors

Steve Gregory

Fri, 4 Oct 2002 17:34:05 EDT

Gold Embrittlement

Frank Kimmey

Fri, 4 Oct 2002 13:42:20 -0700

Gold finish.

Henry Rekers

Fri, 18 Oct 2002 08:43:16 -0700

Gold on Leads

Rudy Sedlak

Fri, 4 Oct 2002 10:16:29 EDT

Golden Pin Connectors

Dave Hillman

Thu, 10 Oct 2002 07:40:05 -0500

Re: Golden Pin Connectors

joyce

Wed, 9 Oct 2002 16:27:27 -0400

Golden Pin Connectors

Dehoyos, Ramon

Wed, 9 Oct 2002 11:27:56 -0700

GXTT Plating (palladium-nickel alloy)

Fri, 25 Oct 2002 14:31:30 -0700

HASL process OK or not ?

Sherif Refaat

Thu, 31 Oct 2002 11:14:26 -0500

Geoff Layhe

Thu, 31 Oct 2002 15:47:16 -0000

Dave Hillman

Thu, 31 Oct 2002 09:59:21 -0600

Crepeau, Phil

Thu, 31 Oct 2002 07:48:22 -0800

Russell Burdick

Thu, 31 Oct 2002 08:47:44 -0700

d. terstegge

Thu, 31 Oct 2002 15:31:52 +0100

Rudy Sedlak

Thu, 31 Oct 2002 09:03:10 EST

Dave Hillman

Thu, 31 Oct 2002 07:50:19 -0600

Have you ever used this part?

WEEKES, MICHAEL HS-SNS

Thu, 31 Oct 2002 08:23:24 -0500

HASL process OK or not ?

d. terstegge

Thu, 31 Oct 2002 13:00:21 +0100

Kathy Kuhlow

Fri, 25 Oct 2002 16:10:52 -0500

Have You Heard A Board Shop Called...

Re: Have You Heard A Board Shop Called...

Guy Ramsey

Thu, 17 Oct 2002 07:43:33 -0400

Re: Have You Heard A Board Shop Called...

Wed, 16 Oct 2002 16:47:05 -0500

Re: Have You Heard A Board Shop Called...

Jason Lineback

Wed, 16 Oct 2002 16:42:16 -0500

Have You Heard A Board Shop Called...

Wed, 16 Oct 2002 13:59:53 -0700

High Voltage encapsulant recommendations

Re: High Voltage encapsulant recommendations

Graham Naisbitt

Fri, 18 Oct 2002 12:56:18 +0100

High Voltage encapsulant recommendations

Gary Bremer

Wed, 16 Oct 2002 13:29:39 -0400

HOAX

Re: HOAX

Tim Reeves

Wed, 16 Oct 2002 10:17:08 -0700

Re: HOAX

Eric Dawson

Tue, 15 Oct 2002 10:19:32 +0100

how thick is ½ ounce copper

Re: how thick is ½ ounce copper

Thu, 17 Oct 2002 12:22:04 -0400

Re: how thick is ½ ounce copper

Thu, 17 Oct 2002 09:01:05 +0800

how thick is ½ ounce copper

Graham Collins

Wed, 16 Oct 2002 15:00:13 -0400

how thick is ounce copper

Re: how thick is ounce copper

Werner Engelmaier

Thu, 17 Oct 2002 13:14:44 EDT

impedance measurement to verify conformance to spec

Mark Lettang

Tue, 15 Oct 2002 13:41:58 -0500

information from European report on toxic metals

Re: information from European report on toxic metals

joyce

Wed, 30 Oct 2002 10:02:41 -0500

Re: information from European report on toxic metals

Joe Fjelstad

Wed, 30 Oct 2002 09:08:24 EST

Re: information from European report on toxic metals

Bev Christian

Wed, 30 Oct 2002 08:53:52 -0500

Re: information from European report on toxic metals

joyce

Wed, 30 Oct 2002 07:49:29 -0500

Re: information from European report on toxic metals

Brian Ellis

Wed, 30 Oct 2002 09:16:02 +0200

Re: information from European report on toxic metals

Joe Fjelstad

Tue, 29 Oct 2002 19:37:21 EST

Re: information from European report on toxic metals

rgrant

Tue, 29 Oct 2002 16:34:41 -0700

Re: information from European report on toxic metals

Dan R. Johnson

Tue, 29 Oct 2002 14:26:37 -0800

Re: information from European report on toxic metals

Ahne Oosterhof

Tue, 29 Oct 2002 10:11:38 -0800

information from European report on toxic metals

Joe Fjelstad

Tue, 29 Oct 2002 02:11:59 EST

Ink Jet Printing for PCBs

Re: Ink Jet Printing for PCBs

Jason Lineback

Mon, 7 Oct 2002 10:37:34 -0500

Re: Ink Jet Printing for PCBs

McCabe, Chris

Sat, 5 Oct 2002 11:40:16 -0400

Re: Ink Jet Printing for PCBs

Leo Roos

Fri, 4 Oct 2002 17:08:22 -0700

Ink Jet Printing for PCBs

Roger Cook

Fri, 4 Oct 2002 08:51:49 -0700

Ionograph measurements

Mike Fenner

Tue, 15 Oct 2002 16:03:22 +0100

Dieselberg, Ron

Mon, 30 Sep 2002 07:06:06 -0400

Graham Naisbitt

Sat, 5 Oct 2002 17:55:05 +0100

joyce

Thu, 3 Oct 2002 12:32:02 -0400

d. terstegge

Thu, 3 Oct 2002 16:46:42 +0200

Thu, 3 Oct 2002 08:59:06 -0500

Tegehall Per-Erik

Thu, 3 Oct 2002 15:08:44 +0200

Mike Fenner

Thu, 3 Oct 2002 10:59:54 +0100

joyce

Wed, 2 Oct 2002 08:18:36 -0400

Mel Parrish

Tue, 1 Oct 2002 07:50:29 -0500

Ionograph measurements (NT)

Tegehall Per-Erik

Tue, 1 Oct 2002 08:56:10 +0200

Re: Ionograph measurements (NT)

Tim Reeves

Mon, 7 Oct 2002 10:17:34 -0700

Ionograph measurements (NT) OT!!

Re: Ionograph measurements (NT) OT!!

Munie, Gregory

Mon, 7 Oct 2002 13:44:00 -0500

Re: Ionograph measurements (NT) OT!!

Bev Christian

Mon, 7 Oct 2002 14:15:58 -0400

IP-5 Power Bits

Re: IP-5 Power Bits

Randy Bock Sr.

Sat, 26 Oct 2002 06:52:22 -0400

IP-5 Power Bits

Dave Hornback

Fri, 25 Oct 2002 15:27:40 -0700

IPC-6012A

Re: IPC-6012A

Werner Engelmaier

Tue, 8 Oct 2002 22:16:26 EDT

IPC-6012A

Sonny Jee

Fri, 4 Oct 2002 14:15:41 +0900

IPC-A-610C VS. GR-78-CORE

marita zavala (marita.zavala@sanmina-sci-com)

Fri, 11 Oct 2002 12:30:52 -0500

IPC-SM-840

Re: IPC-SM-840

Guy Ramsey

Wed, 30 Oct 2002 08:38:18 -0500

IPC-SM-840

Colin Weber

Wed, 30 Oct 2002 14:34:12 +1100

IPC/JEDEC announce Taipei Conf on LF Comp & Assy

Jack Crawford

Fri, 25 Oct 2002 15:24:27 -0500

It may be a Hoax, was [TN] (no subject)

Matthias Mansfeld

Tue, 15 Oct 2002 10:55:20 +0200

JIC 37° fittings

Phil Nutting

Wed, 16 Oct 2002 15:09:24 -0400

Jim Herard/Endicott/IBM is out of the office.

Jim Herard

Tue, 8 Oct 2002 01:42:41 -0400

Kollmorgan Flying Probe Testers

Re: Kollmorgan Flying Probe Testers

Lee Whiteman

Mon, 21 Oct 2002 10:39:25 -0400

Laminate Materials

Re: Laminate Materials

Mcmaster, Michael

Tue, 8 Oct 2002 12:47:40 -0700

Re: Laminate Materials

Randy Bock Sr.

Tue, 8 Oct 2002 11:21:03 -0400

FW: Laminate Materials

Sefika Ozkal

Tue, 8 Oct 2002 16:30:48 +0300

Laminate Materials

Sefika Ozkal

Tue, 8 Oct 2002 07:48:45 +0300

Laminate Source

Geoff Layhe

Tue, 15 Oct 2002 09:10:34 +0100

laminate source

Sun, 13 Oct 2002 08:43:47 EDT

Laminate surface micro void & IPC Specification

Re: Laminate surface micro void & IPC Specification

Shirley Xiao

Wed, 23 Oct 2002 04:51:03 -0700

Re: Laminate surface micro void & IPC Specification

Franklin D Asbell

Mon, 21 Oct 2002 11:19:37 -0500

Laminate surface micro void & IPC Specification

Shirley Xiao

Mon, 21 Oct 2002 03:15:28 -0700

Lead -Antimony experience

Re: Lead -Antimony experience

Phillip Hinton

Mon, 28 Oct 2002 09:46:38 EST

Re: Lead -Antimony experience

Wenger, George M.

Mon, 28 Oct 2002 06:33:13 -0600

Lead -Antimony experience

Mon, 28 Oct 2002 17:36:10 +0800

Lead protrusion

Mel Parrish

Thu, 31 Oct 2002 09:39:26 -0600

Guy Ramsey

Thu, 31 Oct 2002 10:27:15 -0500

Steve MacDonald

Thu, 31 Oct 2002 10:12:34 -0500

Bissonnette, Jean-Francois

Thu, 31 Oct 2002 10:03:24 -0500

Graham Collins

Thu, 31 Oct 2002 09:38:24 -0500

Barry Gallegos

Thu, 31 Oct 2002 07:26:25 -0700

Marsico, James

Thu, 31 Oct 2002 08:41:11 -0500

Graham Collins

Thu, 31 Oct 2002 08:34:28 -0500

Lethal Potassium Chloride OT

Sauer, Steven T.

Thu, 31 Oct 2002 08:22:38 -0500

Lead protrusion

Keith Calhoun

Thu, 31 Oct 2002 08:04:35 -0500

Re: Lethal Potassium Chloride OT

Randy Bock Sr.

Tue, 8 Oct 2002 15:00:28 -0400

Re: Lethal Potassium Chloride OT

Tim Reeves

Tue, 8 Oct 2002 10:04:24 -0700

Re: Lethal Potassium Chloride OT

Joe Fjelstad

Mon, 7 Oct 2002 18:42:58 EDT

Looking ESD Tags!

Ken Patel

Mon, 14 Oct 2002 14:16:42 -0700

Looking for Extra Large Panels(size:48"X96") of FR-4 Material.

Re: Looking for Extra Large Panels(size:48"X96") of FR-4 Material.

Thu, 10 Oct 2002 09:57:38 +0100

Looking for Extra Large Panels(size:48"X96") of FR-4 Material.

SDC's Tech Net

Tue, 8 Oct 2002 15:16:52 -0700

Low ICT yield using lead free on OSP

David

Tue, 1 Oct 2002 23:07:08 +0800

Mark Orlowski/PEMSTAR Inc is out of the office.

Mark Orlowski/PEMSTAR Inc

Mon, 21 Oct 2002 01:01:45 -0500

Matt McNeary/FTINN/MFG/KEMET/US is out of the office.

Matt McNeary/FTINN2/MFG/KEMET/US

Mon, 21 Oct 2002 01:00:54 -0400

Metcal BGA Rework/Prototype station

Re: Metcal BGA Rework/Prototype station

Dave Pahlas

Thu, 10 Oct 2002 13:27:03 -0400

Re: Metcal BGA Rework/Prototype station

WEEKES, MICHAEL HS-SNS

Thu, 10 Oct 2002 09:22:33 -0400

Metcal BGA Rework/Prototype station

McGlaughlin, Jeffrey A

Thu, 10 Oct 2002 07:22:42 -0400

MiniWave/Minisandblasting Equipment

SUBSCRIBE Technet Anonymous

Tue, 8 Oct 2002 13:37:02 -0500

Jos Groffils

Tue, 8 Oct 2002 10:57:07 +0200

Jeff Ferry

Fri, 4 Oct 2002 08:35:45 -0400

Fri, 4 Oct 2002 07:31:04 -0400

MiniWave/Minisandblasting Equipment

Ed Popielarski

Fri, 4 Oct 2002 01:51:18 -0700

Dave Hillman

Thu, 3 Oct 2002 14:36:31 -0500

Mounting Horizontal Diode

Stan AUGUSTIN

Wed, 23 Oct 2002 17:28:21 +0200

MPM UP1500

Jowan Iven

Thu, 31 Oct 2002 07:21:36 +0100

Need camera for stereo microscope

Re: Need camera for stereo microscope

Eric Castonguay

Thu, 17 Oct 2002 09:53:17 -0400

Re: Need camera for stereo microscope

McFaddin, Wade

Wed, 16 Oct 2002 19:48:53 -0500

Need camera for stereo microscope

Bissonnette, Jean-Francois

Wed, 16 Oct 2002 16:29:54 -0400

Need camera for stereo microscope - still pictures?

Re: Need camera for stereo microscope - still pictures?

Carl VanWormer

Thu, 17 Oct 2002 07:54:12 -0700

Nitrogen drying/tangent.....

Re: Nitrogen drying/tangent.....

Guy Ramsey

Tue, 29 Oct 2002 13:56:07 -0500

Re: Nitrogen drying/tangent.....

Steve Thomas

Tue, 29 Oct 2002 09:37:03 -0800

Nitrogen drying?

joyce

Wed, 30 Oct 2002 09:26:26 -0500

Guy Ramsey

Tue, 29 Oct 2002 13:57:06 -0500

Guy Ramsey

Tue, 29 Oct 2002 13:56:07 -0500

Gregg Klawson

Tue, 29 Oct 2002 13:25:21 -0500

Misner, Bruce

Tue, 29 Oct 2002 10:26:03 -0700

no clean flux as a board cleaner?

Brian Ellis

Tue, 29 Oct 2002 19:13:09 +0200

Nitrogen drying?

Gregg Klawson

Tue, 29 Oct 2002 11:20:48 -0500

Fri, 11 Oct 2002 14:11:26 -0500

Genny Gibbard

Fri, 11 Oct 2002 11:05:33 -0600

Croslin, Robert

Fri, 11 Oct 2002 09:38:15 -0400

Charles Caswell

Fri, 11 Oct 2002 08:25:46 -0500

Fri, 11 Oct 2002 07:24:31 -0500

Fri, 11 Oct 2002 08:11:43 EDT

joyce

Fri, 11 Oct 2002 07:56:59 -0400

Eric Dawson

Fri, 11 Oct 2002 10:07:40 +0100

Brian Ellis

Fri, 11 Oct 2002 11:16:26 +0300

rgrant

Thu, 10 Oct 2002 18:03:29 -0600

no clean flux as a board cleaner?

Steve Gregory

Thu, 10 Oct 2002 19:45:42 EDT

Genny Gibbard

Thu, 10 Oct 2002 16:25:04 -0600

nominal

Re: nominal

Bresnan, Thomas

Fri, 11 Oct 2002 06:26:09 -0700

Re: nominal

Don Vischulis

Fri, 11 Oct 2002 07:34:56 -0500

nominal

Thu, 10 Oct 2002 23:08:05 EDT

Nonwetting on ImAu

Tempea, Ioan

Wed, 23 Oct 2002 14:03:36 -0400

Nonwetting on ImAu, REAL message

Higgins Leo

Thu, 24 Oct 2002 01:40:09 -0400

Jack Crawford

Wed, 23 Oct 2002 20:27:48 -0500

Bill Wesmoreland

Wed, 23 Oct 2002 15:52:46 -0500

Nonwetting on ImAu, REAL message

Dave Chapman

Wed, 23 Oct 2002 13:31:28 -0500

Tempea, Ioan

Wed, 23 Oct 2002 14:22:38 -0400

Out

Randy Bock Sr.

Mon, 21 Oct 2002 16:24:03 -0400

PADS vs. Expedition

Smith, Richard

Tue, 29 Oct 2002 11:45:32 -0500

PCB design with mask over vias.

Tim Reeves

Fri, 18 Oct 2002 09:53:07 -0700

Thu, 17 Oct 2002 19:24:47 -0400

Werner Engelmaier

Fri, 4 Oct 2002 08:37:56 EDT

Seth Goodman

Fri, 4 Oct 2002 03:24:02 -0500

Fri, 4 Oct 2002 07:46:35 +0800

joyce

Thu, 3 Oct 2002 08:57:56 -0400

Seth Goodman

Wed, 2 Oct 2002 23:45:47 -0500

Seth Goodman

Wed, 2 Oct 2002 23:22:37 -0500

Werner Engelmaier

Wed, 2 Oct 2002 23:20:11 EDT

Thu, 3 Oct 2002 07:38:27 +0800

Dave Chapman

Wed, 2 Oct 2002 10:38:09 -0500

joyce

Wed, 2 Oct 2002 08:02:08 -0400

Werner Engelmaier

Wed, 2 Oct 2002 07:34:08 EDT

Wed, 2 Oct 2002 13:13:38 +0800

Guy Ramsey

Tue, 1 Oct 2002 15:30:32 -0400

Werner Engelmaier

Tue, 1 Oct 2002 12:27:33 EDT

Rick Thompson

Tue, 1 Oct 2002 07:21:00 -0700

PCB Prototyping

Dan R. Johnson

Mon, 28 Oct 2002 10:01:44 -0800

Mon, 28 Oct 2002 09:41:46 -0800

Dan R. Johnson

Mon, 28 Oct 2002 09:15:43 -0800

Performance-Based Quality

Dougal Stewart

Fri, 25 Oct 2002 10:09:31 +0100

PCB Prototyping

Thu, 24 Oct 2002 13:29:29 -0700

Tegehall Per-Erik

Thu, 31 Oct 2002 10:13:18 +0100

David Douthit

Wed, 30 Oct 2002 12:57:19 -0700

Randy Bock Sr.

Wed, 30 Oct 2002 14:16:36 -0500

Randy Bock Sr.

Wed, 30 Oct 2002 14:07:54 -0500

Wed, 30 Oct 2002 11:56:39 -0700

Franklin D Asbell

Wed, 30 Oct 2002 12:38:25 -0600

Performance-Based Quality

Randy Bock Sr.

Wed, 30 Oct 2002 13:31:32 -0500

David Douthit

Wed, 30 Oct 2002 10:39:13 -0700

Personal message

Re: Personal message

Randy Bock Sr.

Wed, 16 Oct 2002 08:41:29 -0400

Re: Personal message

Brian Ellis

Wed, 16 Oct 2002 14:56:40 +0300

Personal message

Graham Naisbitt

Wed, 16 Oct 2002 10:20:52 +0100

Pictures of my problem...

Re: Pictures of my problem...

Victor Hernandez

Thu, 24 Oct 2002 13:18:21 -0500

Pictures of my problem...

Steve Gregory

Thu, 24 Oct 2002 10:55:39 EDT

Poor solder resist adherence.

Re: Poor solder resist adherence.

Franklin D Asbell

Fri, 18 Oct 2002 10:25:28 -0500

Poor solder resist adherence.

Juan T. Marugán

Fri, 18 Oct 2002 10:07:58 -0500

Press fit connectors requirements per IPC-A-610

Re: Press fit connectors requirements per IPC-A-610

Rich Buccieri

Tue, 29 Oct 2002 15:08:00 -0600

Re: Press fit connectors requirements per IPC-A-610

Steve Gregory

Mon, 28 Oct 2002 12:29:15 EST

Re: Press fit connectors requirements per IPC-A-610

Rich Buccieri

Mon, 28 Oct 2002 10:39:07 -0600

Re: Press fit connectors requirements per IPC-A-610

Rick Thompson

Mon, 28 Oct 2002 07:47:00 -0800

Re: Press fit connectors requirements per IPC-A-610

Kathy Kuhlow

Mon, 28 Oct 2002 08:25:20 -0600

Re: Press fit connectors requirements per IPC-A-610

Charles Caswell

Mon, 28 Oct 2002 07:16:38 -0600

Re: Press fit connectors requirements per IPC-A-610

Steve Gregory

Sun, 27 Oct 2002 16:28:13 EST

Re: Press fit connectors requirements per IPC-A-610

Steve Gregory

Sun, 27 Oct 2002 16:22:22 EST

Re: Press fit connectors requirements per IPC-A-610

Steve Gregory

Sun, 27 Oct 2002 15:32:16 EST

Re: Press fit connectors requirements per IPC-A-610

Steve Gregory

Sun, 27 Oct 2002 15:07:10 EST

Press fit connectors requirements per IPC-A-610

Jack Crawford

Sun, 27 Oct 2002 12:32:33 -0600

Press fit connectors...

Atkinson, Neil

Tue, 29 Oct 2002 08:34:27 -0000

David Ricketts

Mon, 28 Oct 2002 14:24:04 -0800

David Douthit

Mon, 28 Oct 2002 10:43:31 -0700

Morse, Carrie

Mon, 28 Oct 2002 11:13:22 -0500

Kathy Kuhlow

Mon, 28 Oct 2002 08:42:08 -0600

Jeff Seeger

Mon, 28 Oct 2002 09:33:25 -0500

Kathy Kuhlow

Mon, 28 Oct 2002 08:14:17 -0600

joyce

Mon, 28 Oct 2002 07:49:12 -0500

Mon, 28 Oct 2002 15:44:33 +0800

David Douthit

Sun, 27 Oct 2002 23:05:18 -0700

Mon, 28 Oct 2002 09:49:33 +0800

DUTTON Phil

Mon, 28 Oct 2002 12:46:44 +1100

Steve Gregory

Sun, 27 Oct 2002 20:01:07 EST

Mon, 28 Oct 2002 08:30:37 +0800

Ron Olinyk

Sun, 27 Oct 2002 13:17:53 -0500

Charles Caswell

Sun, 27 Oct 2002 11:45:00 -0600

Charles Caswell

Sun, 27 Oct 2002 11:33:28 -0600

Gaby Bogdan

Sat, 26 Oct 2002 12:04:04 +0200

Gerry Savard

Fri, 25 Oct 2002 22:49:20 -0400

David Douthit

Fri, 25 Oct 2002 17:36:23 -0700

Steve Gregory

Fri, 25 Oct 2002 20:12:40 EDT

Steve Gregory

Fri, 25 Oct 2002 19:58:38 EDT

rgrant

Fri, 25 Oct 2002 17:47:58 -0600

David Douthit

Fri, 25 Oct 2002 16:46:10 -0700

Rey Sosa

Fri, 25 Oct 2002 15:55:39 -0700

Dave Pahlas

Fri, 25 Oct 2002 18:54:34 -0400

Crepeau, Phil

Fri, 25 Oct 2002 15:51:08 -0700

Charles Caswell

Fri, 25 Oct 2002 17:28:38 -0500

Fri, 25 Oct 2002 18:22:59 -0400

Rick Thompson

Fri, 25 Oct 2002 15:17:00 -0700

PWB Laminate Measling Defects

Genny Gibbard

Fri, 25 Oct 2002 16:14:39 -0600

Press fit connectors...

Steve Gregory

Fri, 25 Oct 2002 18:07:10 EDT

Proof of design book

Re: Proof of design book

Fineline Circuits, Inc.

Sat, 19 Oct 2002 16:59:51 -0700

Proof of design book

Adair, Bret

Fri, 18 Oct 2002 09:55:16 -0700

Re: PWB Laminate Measling Defects

Lum Wee Mei

Wed, 23 Oct 2002 16:18:21 +0800

PWB Laminate Measling Defects

Dam, Phil

Tue, 22 Oct 2002 14:01:32 -0400

QSOP footprint connector

Reid, Lorraine

Fri, 4 Oct 2002 11:10:17 +0100

Quality

Re: Quality

Fri, 25 Oct 2002 15:29:38 -0500

Re: Quality

Mel Parrish

Fri, 25 Oct 2002 11:40:02 -0500

Re: Quality

Brian Toleno

Fri, 25 Oct 2002 12:00:39 -0400

Dehoyos, Ramon

Fri, 25 Oct 2002 06:09:09 -0700

Rudy Sedlak

Thu, 24 Oct 2002 18:11:27 EDT

Eric Castonguay

Thu, 24 Oct 2002 15:32:38 -0400

ken Giery

Thu, 24 Oct 2002 15:32:13 -0400

Question about inspeciton instrument

Thu, 24 Oct 2002 15:01:35 EDT

quality

Mike Rodgers

Thu, 24 Oct 2002 13:49:48 -0500

John Foster

Fri, 4 Oct 2002 16:38:07 -0700

Franklin D Asbell

Fri, 4 Oct 2002 16:22:31 -0500

Franklin D Asbell

Fri, 4 Oct 2002 16:21:14 -0500

Question about inspeciton instrument

Steve Gregory

Fri, 4 Oct 2002 16:39:58 EDT

John Foster

Fri, 4 Oct 2002 13:09:30 -0700

Question about inspection instrument

Mary Jane Chism

Mon, 7 Oct 2002 09:38:39 -0500

Question regarding welds

Re: Question regarding welds

Don Vischulis

Thu, 3 Oct 2002 15:05:18 -0500

Re: Question regarding welds

McGlaughlin, Jeffrey A

Thu, 3 Oct 2002 14:50:53 -0400

Re: Question regarding welds

Werner Engelmaier

Thu, 3 Oct 2002 14:42:00 EDT

Question regarding welds

Franklin D Asbell

Thu, 3 Oct 2002 12:38:49 -0500

Réf. : Re: [TN] PCB design with mask over vias.

Roland Jaquet

Tue, 1 Oct 2002 22:20:48 +0400

Réf. : [TN] HASL process OK or not ?

Roland Jaquet

Thu, 31 Oct 2002 16:54:37 +0400

Réf. : [TN] laminate source

Roland Jaquet

Mon, 14 Oct 2002 19:04:44 +0400

Réf. : [TN] Personal message

Roland Jaquet

Wed, 16 Oct 2002 14:08:57 +0400

Réf. : [TN] Proof of design book

Roland Jaquet

Sat, 19 Oct 2002 14:47:53 +0400

Raised TH components after Wave

Barry Gallegos

Wed, 30 Oct 2002 07:05:04 -0700

Tue, 29 Oct 2002 18:39:31 -0500

Jason W. Gregory

Tue, 29 Oct 2002 17:04:34 -0600

Bailey, Beth A. (AMHERST)

Tue, 29 Oct 2002 15:44:15 -0500

Dave Chapman

Tue, 29 Oct 2002 14:39:23 -0600

Kathy Kuhlow

Tue, 29 Oct 2002 14:32:56 -0600

Chad Haima

Tue, 29 Oct 2002 12:18:49 -0800

Bloomquist, Ken

Tue, 29 Oct 2002 12:20:41 -0800

Dave Pahlas

Tue, 29 Oct 2002 15:17:07 -0500

Raised TH components after Wave

Richard Carruth

Tue, 29 Oct 2002 14:04:50 -0600

Tue, 29 Oct 2002 15:02:25 -0500

Red Ink

Leigh-Ann Litavis

Mon, 28 Oct 2002 09:49:45 EST

Mon, 28 Oct 2002 07:48:01 +0800

Barmuta, Mike

Fri, 25 Oct 2002 13:16:08 -0700

Rejected posting to [log in to unmask]

Franklin D Asbell

Fri, 25 Oct 2002 15:12:27 -0500

Red Ink

Fri, 25 Oct 2002 15:35:58 EDT

FW: Rejected posting to [log in to unmask]

Marita Zavala

Fri, 11 Oct 2002 15:25:57 -0700

Roadmap for Transition to Lead Free Components?

Re: Roadmap for Transition to Lead Free Components?

joyce

Tue, 15 Oct 2002 08:30:01 -0400

Re: Roadmap for Transition to Lead Free Components?

Higgins Leo

Sat, 12 Oct 2002 13:22:36 -0400

Re: Roadmap for Transition to Lead Free Components?

Steve Thomas

Thu, 10 Oct 2002 09:18:18 -0700

Re: Roadmap for Transition to Lead Free Components?

rgrant

Thu, 10 Oct 2002 09:53:27 -0600

Roadmap for Transition to Lead Free Components?

Dave Hornback

Thu, 10 Oct 2002 08:13:25 -0700

Round Pads for 0402 Parts?

Eric Castonguay

Wed, 30 Oct 2002 13:11:25 -0500

Dave Hillman

Wed, 30 Oct 2002 07:41:05 -0600

Dave Chapman

Wed, 30 Oct 2002 06:33:39 -0600

Stan AUGUSTIN

Wed, 30 Oct 2002 14:01:32 +0200

Gary Camac

Wed, 30 Oct 2002 05:57:32 -0600

Augustin Stan

Wed, 30 Oct 2002 05:18:51 -0600

Jason W. Gregory

Tue, 29 Oct 2002 19:37:00 -0600

Steve Gregory

Tue, 29 Oct 2002 20:19:07 EST

Simon Howells

Wed, 30 Oct 2002 12:15:02 +1100

Rick Thompson

Tue, 29 Oct 2002 16:55:00 -0800

Round Pads for 0402 Parts?

Steve Gregory

Tue, 29 Oct 2002 19:37:18 EST

Rick Thompson

Tue, 29 Oct 2002 16:17:00 -0800

Scary --- and very concerned

Re: Scary --- and very concerned

Werner Engelmaier

Mon, 28 Oct 2002 11:56:32 EST

Re: Scary --- and very concerned

Brian Ellis

Sat, 26 Oct 2002 11:00:16 +0300

Re: Scary --- and very concerned

Steve Gregory

Fri, 25 Oct 2002 22:29:55 EDT

Scary --- and very concerned

Werner Engelmaier

Fri, 25 Oct 2002 22:06:13 EDT

seeking recommendation on BGA cold solder joints monitor

Re: seeking recommendation on BGA cold solder joints monitor

Guy Ramsey

Wed, 16 Oct 2002 08:10:12 -0400

Re: seeking recommendation on BGA cold solder joints monitor

Tue, 15 Oct 2002 23:13:58 EDT

seeking recommendation on BGA cold solder joints monitor

carlsbad li

Tue, 15 Oct 2002 19:25:01 -0700

Shean Dalton/ElectrovertUS/Cookson is out of the office.

Shean Dalton

Wed, 23 Oct 2002 01:01:06 -0500

Side and Toe Fillets...

Eric Dawson

Mon, 28 Oct 2002 08:04:56 -0000

Dave Hillman

Fri, 25 Oct 2002 17:18:01 -0500

Mel Parrish

Thu, 24 Oct 2002 13:04:58 -0500

Nancy Trumbull

Thu, 24 Oct 2002 13:47:56 -0400

Gregg A. Owens

Thu, 24 Oct 2002 09:17:07 -0700

Werner Engelmaier

Thu, 24 Oct 2002 12:10:38 EDT

Mel Parrish

Thu, 24 Oct 2002 09:53:57 -0500

Side and Toe Fillets...From IPC

Grant Emandien

Thu, 24 Oct 2002 16:22:43 +0200

Side and Toe Fillets...

Steve Gregory

Thu, 24 Oct 2002 10:06:34 EDT

Werner Engelmaier

Fri, 25 Oct 2002 08:28:21 EDT

Wenger, George M.

Fri, 25 Oct 2002 07:01:14 -0500

joyce

Fri, 25 Oct 2002 07:38:59 -0400

Steve Gregory

Thu, 24 Oct 2002 19:05:35 EDT

slivers from electroplated tin

Jack Crawford

Thu, 24 Oct 2002 17:22:54 -0500

Rudy Sedlak

Thu, 17 Oct 2002 00:15:44 EDT

Adam Seychell

Wed, 16 Oct 2002 22:08:45 -0500

tony steinke

Wed, 16 Oct 2002 08:06:41 -0700

David Douthit

Tue, 15 Oct 2002 21:45:15 -0700

slivers from electroplated tin

Rudy Sedlak

Tue, 15 Oct 2002 23:32:09 EDT

Adam Seychell

Tue, 15 Oct 2002 20:02:49 -0500

small parts handling equipment

Mike Fenner

Thu, 3 Oct 2002 09:04:17 +0100

SMD and NSMD pads on same BGA

Re: SMD and NSMD pads on same BGA

Steve Gregory

Tue, 29 Oct 2002 15:19:56 EST

Re: SMD and NSMD pads on same BGA

Rey Sosa

Tue, 29 Oct 2002 12:13:25 -0800

Re: SMD and NSMD pads on same BGA

Dave Hillman

Tue, 29 Oct 2002 13:23:45 -0600

SMD and NSMD pads on same BGA

Glenn Pelkey

Tue, 29 Oct 2002 10:48:18 -0800

SMD/NSMD pic

Werner Engelmaier

Thu, 17 Oct 2002 21:33:05 EDT

Guy Ramsey

Thu, 17 Oct 2002 16:14:20 -0400

Steve Thomas

Thu, 17 Oct 2002 12:46:06 -0700

solder deposition by dipping

Steve Gregory

Thu, 17 Oct 2002 15:46:07 EDT

SMD/NSMD pic

Werner Engelmaier

Thu, 17 Oct 2002 14:41:20 EDT

SNEC Meeting

Gary Ferrari

Fri, 18 Oct 2002 04:25:42 EDT

Re: solder deposition by dipping

Mike Fenner

Mon, 14 Oct 2002 17:08:43 +0100

solder deposition by dipping

Jos Groffils

Mon, 14 Oct 2002 16:06:07 +0200

Solder melt energy coefficient

Tim Reeves

Tue, 8 Oct 2002 16:26:46 -0700

Tim Reeves

Tue, 8 Oct 2002 13:17:11 -0700

Dave Hillman

Tue, 8 Oct 2002 07:47:45 -0500

Jos Groffils

Tue, 8 Oct 2002 10:32:43 +0200

Solder melt energy coefficient

Jos Groffils

Tue, 8 Oct 2002 10:14:46 +0200

Ed Popielarski

Mon, 7 Oct 2002 20:56:25 -0700

solder paste vendor

Vandendolder, Ron

Tue, 22 Oct 2002 13:00:16 -0400

Solder UNDER Soldermask Accept/Reject Criteria?

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Thu, 24 Oct 2002 07:07:51 -0400

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Franklin D Asbell

Wed, 23 Oct 2002 09:46:54 -0500

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Wed, 23 Oct 2002 09:59:48 +0800

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Steve Gregory

Tue, 22 Oct 2002 21:11:31 EDT

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Don Vischulis

Tue, 22 Oct 2002 20:05:17 -0500

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Wed, 23 Oct 2002 07:52:37 +0800

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Brooks,Bill

Tue, 22 Oct 2002 15:57:57 -0700

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Don Vischulis

Tue, 22 Oct 2002 16:17:20 -0500

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Valerie St.Cyr

Tue, 22 Oct 2002 16:36:08 -0400

Re: Solder UNDER Soldermask Accept/Reject Criteria?

John Parsons

Tue, 22 Oct 2002 13:40:57 -0700

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Charlie McMahon

Tue, 22 Oct 2002 16:27:22 -0400

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Brooks,Bill

Tue, 22 Oct 2002 13:20:05 -0700

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Steve Gregory

Tue, 22 Oct 2002 16:07:32 EDT

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Barmuta, Mike

Tue, 22 Oct 2002 12:56:59 -0700

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Hogg, Blair K.

Tue, 22 Oct 2002 15:45:29 -0400

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Valerie St.Cyr

Tue, 22 Oct 2002 15:25:59 -0400

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Charlie McMahon

Tue, 22 Oct 2002 15:20:25 -0400

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Brooks,Bill

Tue, 22 Oct 2002 12:19:43 -0700

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Brooks,Bill

Tue, 22 Oct 2002 12:07:38 -0700

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Phil Nutting

Tue, 22 Oct 2002 14:50:41 -0400

Re: Solder UNDER Soldermask Accept/Reject Criteria?

Steve Gregory

Tue, 22 Oct 2002 14:44:24 EDT

Solder UNDER Soldermask Accept/Reject Criteria?

Brooks,Bill

Tue, 22 Oct 2002 11:30:22 -0700

soldered press fit pins

Re: soldered press fit pins

Mon, 28 Oct 2002 12:54:10 EST

soldering brass to copper

Mike Fenner

Mon, 7 Oct 2002 10:56:24 +0100

Fri, 4 Oct 2002 14:54:54 -0500

Tostevin, Bruce

Fri, 4 Oct 2002 14:12:37 -0500

Dave Hillman

Fri, 4 Oct 2002 10:45:48 -0500

rgrant

Fri, 4 Oct 2002 08:39:50 -0600

Dave Hillman

Fri, 4 Oct 2002 08:50:46 -0500

Guy Ramsey

Fri, 4 Oct 2002 09:02:09 -0400

Mike Fenner

Fri, 4 Oct 2002 10:47:31 +0100

soldering brass to copper

Dan R. Johnson

Thu, 3 Oct 2002 16:28:21 -0700

Phil Nutting

Thu, 3 Oct 2002 15:22:41 -0400

soldering brass to copper & microsandblaster

Re: soldering brass to copper & microsandblaster

Dave Hillman

Mon, 7 Oct 2002 07:55:32 -0500

Sorry the repeat reference...

Joe Fjelstad

Sun, 27 Oct 2002 18:52:29 EST

Stacking of components (SMD) Revisited

Croslin, Robert

Fri, 18 Oct 2002 08:01:12 -0400

Thu, 17 Oct 2002 08:50:08 +0800

Croslin, Robert

Wed, 16 Oct 2002 11:16:48 -0400

Jeff Ferry

Wed, 16 Oct 2002 10:33:28 -0400

Dan R. Johnson

Tue, 15 Oct 2002 15:25:56 -0700

Mark Roslawsk

Tue, 15 Oct 2002 14:24:49 -0700

Stacking of components (SMD) Revisited

Werner Engelmaier

Tue, 15 Oct 2002 16:34:59 EDT

Alex Krstic

Tue, 15 Oct 2002 13:47:46 -0600

Standards for PC Assembly: Off shelf

Re: Standards for PC Assembly: Off shelf

Mon, 7 Oct 2002 17:32:19 EDT

Standards for PC Assembly: Off shelf

Bissonnette, Jean-Francois

Mon, 7 Oct 2002 12:41:48 -0400

Sterling silver finish

Dave Chapman

Thu, 17 Oct 2002 15:29:39 -0500

Rey Sosa

Thu, 17 Oct 2002 10:32:16 -0700

Dave Chapman

Wed, 16 Oct 2002 12:55:57 -0500

Chris Christian

Wed, 16 Oct 2002 11:31:57 -0400

Sterling silver finish

Francis Sun

Wed, 16 Oct 2002 09:09:36 -0400

Tape Grid Arrays

Re: Tape Grid Arrays

Higgins Leo

Fri, 18 Oct 2002 14:21:14 -0400

Re: Tape Grid Arrays

Chris Christian

Wed, 16 Oct 2002 15:17:30 -0400

Tape Grid Arrays

Louis, Edwin @ CSE

Wed, 16 Oct 2002 14:20:56 -0400

TBGAs

Re: TBGAs

Louis, Edwin @ CSE

Mon, 7 Oct 2002 09:33:40 -0400

Re: TBGAs

Higgins Leo

Thu, 3 Oct 2002 10:38:17 -0400

TBGAs

Louis, Edwin @ CSE

Wed, 2 Oct 2002 08:29:56 -0400

TechNet

Kathy Kuhlow

Mon, 28 Oct 2002 08:28:31 -0600

Brian Ellis

Mon, 28 Oct 2002 09:47:36 +0200

Raghavendra Bs

Mon, 28 Oct 2002 06:15:33 +0530

Raghavendra Bs

Sun, 27 Oct 2002 14:29:30 +0530

Brian Ellis

Sun, 27 Oct 2002 08:44:37 +0200

Technical paper to read and consider

Raghavendra Bs

Sun, 27 Oct 2002 09:33:43 +0530

Technet Error Messages

Keach Sasamori

Fri, 4 Oct 2002 13:18:25 -0500

Joe Fjelstad

Sun, 27 Oct 2002 13:58:51 EST

Temp Humidity Control - Do you?

Gary Camac

Thu, 3 Oct 2002 16:36:05 -0500

Guy Ramsey

Thu, 3 Oct 2002 10:55:33 -0400

Temp Humidity Control - Do you?

WEEKES, MICHAEL HS-SNS

Thu, 3 Oct 2002 09:54:45 -0400

Francois Monette

Thu, 3 Oct 2002 08:50:59 -0400

Randy Bock Sr.

Thu, 3 Oct 2002 08:42:55 -0400

Randy Bock Sr.

Thu, 3 Oct 2002 08:40:54 -0400

Lee Whiteman

Wed, 2 Oct 2002 16:55:07 -0400

Temp Humidity Control - Do you?

Guy Ramsey

Wed, 2 Oct 2002 16:27:47 -0400

Henry Rekers

Wed, 2 Oct 2002 12:24:15 -0700

Temperature Chart

Victor Hernandez

Wed, 2 Oct 2002 09:00:44 -0500

testhouses?

Re: testhouses?

David Douthit

Fri, 25 Oct 2002 09:42:41 -0700

testhouses?

Galster Norbert

Thu, 24 Oct 2002 11:44:21 +0200

Thickness Problem

Re: Thickness Problem

David Ricketts

Fri, 11 Oct 2002 12:33:38 -0700

Thickness Problem

Sefika Ozkal

Fri, 11 Oct 2002 15:34:52 +0300

Undeliverable: Re: [TN] Alternative Finishes To Tin/Lead

Re: FW: Undeliverable: Re: [TN] Alternative Finishes To Tin/Lead

Randy Bock Sr.

Fri, 4 Oct 2002 08:00:02 -0400

FW: Undeliverable: Re: [TN] Alternative Finishes To Tin/Lead

Wenger, George M.

Thu, 3 Oct 2002 19:50:53 -0500

Undercut peeling on all Gold Board

Glynn Shaw

Fri, 11 Oct 2002 11:43:21 -0700

Eddie Rocha

Fri, 11 Oct 2002 11:27:35 -0700

Barmuta, Mike

Fri, 11 Oct 2002 07:18:55 -0700

Undercut peeling on all Gold Board

Crepeau, Phil

Thu, 10 Oct 2002 16:11:04 -0700

Steve Mac Donald

Thu, 10 Oct 2002 14:59:30 -0500

Undercut peeling on all Gold Board--More than you wanted to know

Re: Undercut peeling on all Gold Board--More than you wanted to know

Rudy Sedlak

Fri, 11 Oct 2002 01:05:19 EDT

Unidrill

Tue, 8 Oct 2002 11:10:32 EDT

Via clearance

Re: Via clearance

Nowland, Russell Howard (Russell)

Wed, 2 Oct 2002 16:47:48 -0500

Via clearance

Paul Truit

Wed, 2 Oct 2002 16:30:04 -0400

Virus alert

Re: Virus alert

Dan R. Johnson

Tue, 15 Oct 2002 08:36:50 -0700

Re: Virus alert

Tue, 15 Oct 2002 18:33:42 +0800

Re: Virus alert

Tegehall Per-Erik

Tue, 15 Oct 2002 09:21:04 +0200

WARPAGE

Franklin D Asbell

Wed, 30 Oct 2002 09:36:20 -0600

Russell Burdick

Wed, 30 Oct 2002 08:26:15 -0700

Tue, 29 Oct 2002 11:48:46 +0800

Randy Bock Sr.

Mon, 28 Oct 2002 13:44:18 -0500

Randy Bock Sr.

Mon, 28 Oct 2002 12:20:26 -0500

Glenn Pelkey

Mon, 28 Oct 2002 09:13:23 -0800

Franklin D Asbell

Mon, 28 Oct 2002 10:46:28 -0600

James TerVeen

Mon, 28 Oct 2002 11:39:46 -0500

Franklin D Asbell

Mon, 28 Oct 2002 10:30:42 -0600

Water-soluble flux wash pressures?

Eric Castonguay

Mon, 28 Oct 2002 11:14:53 -0500

WARPAGE

Karnwal, Pankaj

Mon, 28 Oct 2002 08:02:16 +0100

Dave Hillman

Fri, 25 Oct 2002 17:30:41 -0500

Brian Ellis

Fri, 25 Oct 2002 08:43:07 +0300

Fri, 25 Oct 2002 00:55:20 EDT

Water-soluble flux wash pressures?

Fri, 25 Oct 2002 08:43:39 +0800

Rick Thompson

Thu, 24 Oct 2002 15:57:00 -0700

Wave soldering pallet thickness

Dave Pick

Tue, 1 Oct 2002 21:00:00 +0100

Dave Chapman

Tue, 1 Oct 2002 13:28:53 -0500

Dave Pahlas

Tue, 1 Oct 2002 11:22:53 -0400

Peter Lee

Tue, 1 Oct 2002 07:39:00 -0700

Re: Welding of innerlayers

Ed Popielarski

Mon, 30 Sep 2002 22:12:56 -0700

Welding of innerlayers

Guy Ramsey

Thu, 3 Oct 2002 14:34:06 -0400

Re: Welding of innerlayers

Franklin D Asbell

Thu, 3 Oct 2002 13:12:27 -0500

Re: Welding of innerlayers

Werner Engelmaier

Thu, 3 Oct 2002 12:45:56 EDT

Welding of innerlayers

Franklin D Asbell

Thu, 3 Oct 2002 08:15:43 -0500

when is a press-fit pin not a press-fit pin

Re: when is a press-fit pin not a press-fit pin

Sauer, Steven T.

Mon, 28 Oct 2002 16:19:39 -0500

when is a press-fit pin not a press-fit pin

Jack Crawford

Mon, 28 Oct 2002 11:34:41 -0600

x's-outs

Re: x's-outs

Franklin D Asbell

Thu, 17 Oct 2002 12:32:34 -0500

x's-outs

Bill Dworak

Wed, 16 Oct 2002 12:57:28 -0700

Z-axis BGA solder joint verification ?

joyce

Thu, 17 Oct 2002 12:15:30 -0400

Tempea, Ioan

Thu, 17 Oct 2002 08:39:57 -0400

Werner Engelmaier

Wed, 16 Oct 2002 22:55:01 EDT

Thu, 17 Oct 2002 08:58:46 +0800

Dave Pahlas

Wed, 16 Oct 2002 16:30:44 -0400

Z-axis BGA solder joint verification ?

Tempea, Ioan

Wed, 16 Oct 2002 14:27:10 -0400

Mark Roslawski

Wed, 16 Oct 2002 08:44:50 -0700

Z-axis BGA solder joint verification? Addendum - Stress Riser Question

Re: Z-axis BGA solder joint verification? Addendum - Stress Riser Question

Werner Engelmaier

Sat, 19 Oct 2002 07:40:04 EDT

Re: Z-axis BGA solder joint verification? Addendum - Stress Riser Question

Dave Hillman

Fri, 18 Oct 2002 09:38:46 -0500

Re: Z-axis BGA solder joint verification? Addendum - Stress Riser Question

Werner Engelmaier

Fri, 18 Oct 2002 10:24:09 EDT

Re: Z-axis BGA solder joint verification? Addendum - Stress Riser Question

Tempea, Ioan

Fri, 18 Oct 2002 08:13:05 -0400

Re: Z-axis BGA solder joint verification? Addendum - Stress Riser Question

joyce

Thu, 17 Oct 2002 14:34:59 -0400

Re: Z-axis BGA solder joint verification? Addendum - Stress Riser Question

Werner Engelmaier

Thu, 17 Oct 2002 13:04:40 EDT

Re: Z-axis BGA solder joint verification? Addendum - Stress Riser Question

Dave Hillman

Thu, 17 Oct 2002 09:09:15 -0500

[LF] [TN] Scary --- and very concerned

Werner Engelmaier

Tue, 29 Oct 2002 13:11:46 EST

joyce

Mon, 28 Oct 2002 17:20:41 -0500

Jason W. Gregory

Mon, 28 Oct 2002 15:58:55 -0600

Crepeau, Phil

Mon, 28 Oct 2002 07:41:24 -0800

Brian Ellis

Mon, 28 Oct 2002 17:37:56 +0200

Crepeau, Phil

Mon, 28 Oct 2002 07:19:12 -0800

Joe Fjelstad

Sun, 27 Oct 2002 09:12:32 EST

Steve Gregory

Sat, 26 Oct 2002 17:19:05 EDT

Crepeau, Phil

Sat, 26 Oct 2002 12:57:06 -0700

[TN] how thick is ½ ounce copper

Joe Fjelstad

Sat, 26 Oct 2002 11:36:02 EDT

[TN] Fibre Optic

FW: [TN] Fibre Optic

joyce

Tue, 15 Oct 2002 10:24:05 -0400

Tim Reeves

Fri, 18 Oct 2002 09:41:26 -0700

JaMi Smith

Thu, 17 Oct 2002 14:08:56 -0700

Franklin D Asbell

Thu, 17 Oct 2002 12:25:03 -0500

Graham Collins

Thu, 17 Oct 2002 12:52:20 -0400

Atkinson, Neil

Thu, 17 Oct 2002 06:39:36 +0100

Bresnan, Thomas

Wed, 16 Oct 2002 15:12:23 -0700

Taylor, Ralph W

Wed, 16 Oct 2002 16:33:40 -0400

Alcorn, Brent

Wed, 16 Oct 2002 16:41:11 -0400

McGlaughlin, Jeffrey A

Wed, 16 Oct 2002 16:28:09 -0400

Marsico, James

Wed, 16 Oct 2002 16:20:21 -0400

Franklin D Asbell

Wed, 16 Oct 2002 14:58:14 -0500

Roger Stoops

Wed, 16 Oct 2002 15:43:26 -0400