Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 1 Oct 2002 12:27:33 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Rick,
I have seen no evidence, nor do physics-of-failure considerations suggest
there should be any, that there is an "increase in PTV barrel strength by
filling the hole with solder." PTV interconnect structures can suffer 2 major
failure modes: (1) barrel fracture, and (2) inner-layer separation [ILS].
Barrel fracture: I have seen no evidence, nor do physics-of-failure
considerations suggest there should be any, that there is an "increase in PTV
barrel strength by filling the hole with solder" regarding this failure mode.
ILS: Filling the PTV barrel does strengthen the PTV barrel radially--it thus
can resist the compressive loads from the resin thermal expansion trying to
collapse the barrel. There is both experimental evidence and analytical
reasons; however, I have not seen an analysis yet quantifying this effect.
Werner Engelmaier
Engelmaier Associates, L.C.
Electronic Packaging, Interconnection and Reliability Consulting
7 Jasmine Run
Ormond Beach, FL 32174 USA
Phone: 904-437-8747, Fax: 904-437-8737
E-mail: [log in to unmask], Website: www.engelmaier.com
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|