TECHNET Archives

March 2010

TechNet@IPC.ORG

Options: Hide Table of Contents

90Pb / 10Sn SOLDER BALLS (4 Messages)
9201 (2 Messages)
<No subject> (1 Message)
air or nitrogen for drying (20 Messages)
Aluminium wire bonding (4 Messages)
Antwort: [TN] Eliminating interemediate washes (1 Message)
Apex - who's going? (11 Messages)
BGA ball coplanarity inspection equipment (2 Messages)
BTC rework, Square SJs (24 Messages)
Cable wash (9 Messages)
Colour of Oxidized Tin (2 Messages)
Come hear (or heckle) TechNet's Bob Landman during his tin whiskers chat today (1 Message)
Component Staking Adhesive (6 Messages)
condensation (6 Messages)
Conformal Coat Over No-Clean Flux (34 Messages)
Conformal Coating Issue? (8 Messages)
Conformal Coatings: Resistance to Humidity and Moisture (10 Messages)
Deltronic, Video Comparator DVC-120 (2 Messages)
DuPont Sontara Stencil Wiping Paper (1 Message)
Eliminating interemediate washes (5 Messages)
Eliminating intermediate washes (2 Messages)
email off (3 Messages)
ESD Cap Plugs (11 Messages)
ESD protection / high voltage safety question (11 Messages)
Failed Ring Terminal (9 Messages)
FOD in JST Connector (1 Message)
Formation of Sb3O2 during reflow (1 Message)
fungus question (15 Messages)
Gold Finger Plating for High Vibration Environments (3 Messages)
Hackneyed? (9 Messages)
Hiring a Software Engineer (1 Message)
How to solder this one (2 Messages)
If you're going to IPC APEX EXPO - We have Technet Ribbons! (3 Messages)
IMC (1 Message)
John Maxwell ohoy (1 Message)
Kester R596L hail mary (4 Messages)
Laser vias (4 Messages)
Lead forming angle and solder joint formation (3 Messages)
LEAD FREE REWORK QUESTION (7 Messages)
Lead Straightning on FIne Pitch QFPs (9 Messages)
Long term Shelf life of electronic components (1 Message)
Low Outgassing, Black Sealant / Underfill (14 Messages)
Low Temp Solder Paste (9 Messages)
More on Toyota (34 Messages)
More Than 120 New Products at IPC APEX EXPO 2010 (1 Message)
Need some opinions (12 Messages)
No Clean Flux Activation Temps (3 Messages)
NTC - Friday Elemental Trivia Question (19 Messages)
NTC - Friday Elemental Trivia Question - The Winner (4 Messages)
NTC Nothing to do with T@Y@TA (4 Messages)
OOPS - Via-in-Pad BGA - Sort Of (1 Message)
Orange Peel Termination Finish (11 Messages)
Organic Metal Nano surface finish (1 Message)
PAGODERING OR SMILING (11 Messages)
Partial NTC - [TN] fungus question/BGA voids (2 Messages)
PCBA Test (5 Messages)
Personal radiation device for X-ray machine (9 Messages)
pin hole surafce mount joint (3 Messages)
Poll: EMS Part numbering systems (10 Messages)
POP Technology (1 Message)
Press fit connectors (2 Messages)
Prodasic (4 Messages)
R: [TN] Reflow Oven Comparison and Qualification (1 Message)
Reflow Oven Comparison and Qualification (15 Messages)
Regarding PCB EDGE to Copper Spacing for V scoring./v grooving (4 Messages)
Request to IPC (5 Messages)
Roger Wild References (2 Messages)
RoHS and T----- (3 Messages)
Rough surface of glass diode (Fairchild 1N4148) (2 Messages)
SAC thermal life model (2 Messages)
Seeking for advice on buried capacitance material selection (1 Message)
Selective Solder Equipment (3 Messages)
Selective Solder Equipment 2nd attemp (1 Message)
SFP cable ----Help (1 Message)
So sorry - I keep forgetting to add HTTP when I post here. Technet Photos. (1 Message)
Solder Paste Height Measurement Software/Devices (1 Message)
Solder volume verification system (2 Messages)
SPAM-LOW: [TN] Organic Metal Nano surface finish (2 Messages)
Special purpose soldermask (5 Messages)
Strip immersion Ag and rebuild with OSP. (3 Messages)
Substrate life for BGA substrates (3 Messages)
Suggestions on Making BGA Voids (3 Messages)
Tear drops? (1 Message)
TechNet Digest - 27 Feb 2010 to 28 Feb 2010 (#2010-58) (1 Message)
Technet photo posting site now available (9 Messages)
Technical Bullitens for American cars, recalls on foreign cars (1 Message)
thermo shock cycles (6 Messages)
TI/Emerson SMT Board Mounted Power (16 Messages)
Tin Whiskers (11 Messages)
Tips on plastic BGA's to cure Smiling or Pagodering (1 Message)
Unusual Assembly Requirement... (20 Messages)
V-score VS routed edge (2 Messages)
Vibration issue (22 Messages)
What exactly is Organic Flux? (9 Messages)
Wire bondable gold (7 Messages)
[LF] More importantly.... 8 new substances proposed for REACH control (2 Messages)
[LF] Soldering with NanoFoil (1 Message)
[LF] Soldering with Nanofoils (4 Messages)
[NTC] It depends...mountain dew (2 Messages)
[NTC] More on Toyota (1 Message)
[TN] Formation of Sb3O2 during reflow (1 Message)
[TN] Kester R596L hail mary (1 Message)

Subject Sorted by Subject, Chronologically

From

Date

New Thread 90Pb / 10Sn SOLDER BALLS
Thayer, Wayne - IIW
Wed, 10 Mar 2010 18:37:56 -0500
David D. Hillman
Wed, 10 Mar 2010 16:37:06 -0600
Werner Engelmaier
Wed, 10 Mar 2010 17:31:19 -0500
Lee Whiteman
Wed, 10 Mar 2010 17:14:12 -0500
New Thread 9201
Douglas Pauls
Tue, 30 Mar 2010 15:01:42 -0500
Joyce Koo
Tue, 30 Mar 2010 15:29:09 -0400
New Thread <No subject>
Dean Stadem
Fri, 5 Mar 2010 10:06:49 -0600
New Thread air or nitrogen for drying
Thayer, Wayne - IIW
Thu, 25 Mar 2010 12:56:44 -0400
Inge
Thu, 25 Mar 2010 08:12:28 -0700
Kane, Joseph E (US SSA)
Thu, 25 Mar 2010 08:23:21 -0400
Thayer, Wayne - IIW
Thu, 25 Mar 2010 07:34:29 -0400
Thayer, Wayne - IIW
Thu, 25 Mar 2010 07:17:35 -0400
Hernefjord Ingemar
Thu, 25 Mar 2010 09:02:21 +0100
Gene Felder
Wed, 24 Mar 2010 07:49:43 -0700
Bob Landman
Wed, 24 Mar 2010 10:16:29 -0400
Bob Landman
Wed, 24 Mar 2010 10:08:39 -0400
Thayer, Wayne - IIW
Wed, 24 Mar 2010 09:51:43 -0400
Mike Sewell
Wed, 24 Mar 2010 08:49:21 -0500
Hernefjord Ingemar
Wed, 24 Mar 2010 13:44:35 +0100
Hernefjord Ingemar
Wed, 24 Mar 2010 13:18:39 +0100
Bob Landman
Wed, 24 Mar 2010 08:12:33 -0400
Bob Landman
Wed, 24 Mar 2010 08:01:58 -0400
Bob Landman
Wed, 24 Mar 2010 07:59:03 -0400
Mike Fenner
Wed, 24 Mar 2010 09:14:24 +0000
Chuck Brummer
Tue, 23 Mar 2010 16:58:08 -0700
Inge
Tue, 23 Mar 2010 15:23:03 -0700
Thayer, Wayne - IIW
Tue, 23 Mar 2010 17:50:44 -0400
New Thread Aluminium wire bonding
Steven Creswick
Sat, 13 Mar 2010 10:44:41 -0500
R Sedlak
Fri, 12 Mar 2010 10:00:01 -0800
Thayer, Wayne - IIW
Thu, 11 Mar 2010 19:19:09 -0500
colin mcvean
Thu, 11 Mar 2010 15:51:21 -0800
New Thread Antwort: [TN] Eliminating interemediate washes
Frank Kriesch
Wed, 17 Mar 2010 13:49:58 +0100
New Thread Apex - who's going?
Graham Naisbitt
Wed, 3 Mar 2010 17:44:25 +0000
Karen Tellefsen
Wed, 3 Mar 2010 12:23:54 -0500
Whittaker, Dewey (EHCOE)
Wed, 3 Mar 2010 10:02:04 -0700
Werner Engelmaier
Wed, 3 Mar 2010 09:32:31 -0500
Nowland, Russell Howard (Russell)
Wed, 3 Mar 2010 08:27:09 -0600
Werner Engelmaier
Tue, 2 Mar 2010 17:51:43 -0500
Toby Carrier
Tue, 2 Mar 2010 16:58:09 -0500
Paul Reid
Tue, 2 Mar 2010 16:38:27 -0500
Karen Tellefsen
Tue, 2 Mar 2010 16:29:10 -0500
Robert Kondner
Tue, 2 Mar 2010 16:08:41 -0500
Genny Gibbard
Tue, 2 Mar 2010 11:38:03 -0600
New Thread BGA ball coplanarity inspection equipment
al shirazi
Wed, 3 Mar 2010 18:48:24 -0800
Prashant Joshi
Tue, 2 Mar 2010 12:46:57 -0600
New Thread BTC rework, Square SJs
Chris Mahanna
Tue, 2 Mar 2010 12:03:41 -0500
Chris Mahanna
Tue, 2 Mar 2010 09:20:52 -0500
Victor Hernandez
Tue, 2 Mar 2010 07:32:00 -0600
David D. Hillman
Tue, 2 Mar 2010 07:13:12 -0600
Joyce Koo
Tue, 2 Mar 2010 07:38:05 -0500
Werner Engelmaier
Tue, 2 Mar 2010 07:08:30 -0500
Joyce Koo
Mon, 1 Mar 2010 23:58:46 -0500
Joyce Koo
Mon, 1 Mar 2010 23:46:39 -0500
Werner Engelmaier
Mon, 1 Mar 2010 23:31:01 -0500
vladimir Igoshev
Tue, 2 Mar 2010 04:30:48 +0000
Joyce Koo
Mon, 1 Mar 2010 23:12:28 -0500
Joyce Koo
Mon, 1 Mar 2010 23:09:45 -0500
vladimir Igoshev
Tue, 2 Mar 2010 03:53:33 +0000
Steve Gregory
Mon, 1 Mar 2010 22:33:14 -0500
vladimir Igoshev
Tue, 2 Mar 2010 02:50:11 +0000
Chris Mahanna
Mon, 1 Mar 2010 21:26:50 -0500
Werner Engelmaier
Mon, 1 Mar 2010 19:09:37 -0500
Joyce Koo
Mon, 1 Mar 2010 18:09:06 -0500
Roberts, Jon (SA-1)
Mon, 1 Mar 2010 14:02:21 -0600
Werner Engelmaier
Mon, 1 Mar 2010 13:56:14 -0500
Bev Christian
Mon, 1 Mar 2010 13:17:23 -0500
Chris Mahanna
Mon, 1 Mar 2010 13:08:21 -0500
Werner Engelmaier
Mon, 1 Mar 2010 12:51:46 -0500
Chris Mahanna
Mon, 1 Mar 2010 12:15:35 -0500
New Thread Cable wash
Ioan Tempea
Wed, 24 Mar 2010 13:51:41 -0400
Graham Collins
Wed, 24 Mar 2010 14:21:13 -0300
Graham Collins
Wed, 24 Mar 2010 14:17:03 -0300
Inge
Wed, 24 Mar 2010 10:07:50 -0700
Ioan Tempea
Wed, 24 Mar 2010 12:49:59 -0400
Glidden, Kevin
Wed, 24 Mar 2010 12:39:40 -0400
John Burke
Wed, 24 Mar 2010 09:33:40 -0700
Ken Bloomquist
Wed, 24 Mar 2010 07:54:35 -0800
Ioan Tempea
Wed, 24 Mar 2010 12:01:40 -0400
New Thread Colour of Oxidized Tin
Paul Reid
Mon, 1 Mar 2010 09:09:11 -0500
Mike Fenner
Mon, 1 Mar 2010 10:39:45 +0000
New Thread Come hear (or heckle) TechNet's Bob Landman during his tin whiskers chat today
Mike Buetow
Wed, 3 Mar 2010 13:23:40 -0500
New Thread Component Staking Adhesive
Ken Bloomquist
Thu, 11 Mar 2010 06:39:33 -0800
Werner Engelmaier
Thu, 11 Mar 2010 09:04:08 -0500
Douglas Pauls
Thu, 11 Mar 2010 07:49:04 -0600
Graham Collins
Thu, 11 Mar 2010 07:17:07 -0400
Steve Gregory
Thu, 11 Mar 2010 01:36:35 -0500
Gregg Owens
Wed, 10 Mar 2010 21:19:44 -0800
New Thread condensation
Keith Calhoun
Fri, 19 Mar 2010 14:11:04 -0400
Chris Mahanna
Fri, 19 Mar 2010 13:38:33 -0400
Brian Ellis
Mon, 15 Mar 2010 12:08:48 +0200
Joyce Koo
Mon, 15 Mar 2010 06:03:01 -0400
Hernefjord Ingemar
Mon, 15 Mar 2010 10:28:30 +0100
Thayer, Wayne - IIW
Thu, 11 Mar 2010 09:36:13 -0500
New Thread Conformal Coat Over No-Clean Flux
Reyes, Angel LAM2 4429
Tue, 23 Mar 2010 13:06:23 -0700
John Goulet
Tue, 23 Mar 2010 19:59:59 +0000
Reyes, Angel LAM2 4429
Mon, 8 Mar 2010 15:29:32 -0800
Karen Tellefsen
Mon, 8 Mar 2010 14:08:00 -0500
Ken Bloomquist
Mon, 8 Mar 2010 10:20:38 -0800
Reyes, Angel LAM2 4429
Mon, 8 Mar 2010 09:14:10 -0800
Mel Parrish
Fri, 5 Mar 2010 12:55:37 -0600
Richard Kraszewski
Fri, 5 Mar 2010 12:14:44 -0600
Karen Tellefsen
Fri, 5 Mar 2010 07:54:43 -0500
Mike Fenner
Fri, 5 Mar 2010 11:24:20 +0000
Brian Ellis
Fri, 5 Mar 2010 08:54:35 +0200
Dean Stadem
Thu, 4 Mar 2010 18:54:19 -0600
Inge
Thu, 4 Mar 2010 15:35:34 -0800
Roberts, Jon (SA-1)
Thu, 4 Mar 2010 17:04:21 -0600
David D. Hillman
Thu, 4 Mar 2010 16:37:51 -0600
Ken Bloomquist
Thu, 4 Mar 2010 14:04:15 -0800
Douglas Pauls
Thu, 4 Mar 2010 16:17:22 -0600
Karen Tellefsen
Thu, 4 Mar 2010 17:10:32 -0500
Ken Bloomquist
Thu, 4 Mar 2010 13:38:14 -0800
Douglas Pauls
Thu, 4 Mar 2010 15:42:11 -0600
<>
Thu, 4 Mar 2010 16:00:25 -0500
Leland Woodall
Thu, 4 Mar 2010 15:26:32 -0500
bob wettermann
Thu, 4 Mar 2010 12:32:07 -0800
Robert Kondner
Thu, 4 Mar 2010 15:31:49 -0500
Karen Tellefsen
Thu, 4 Mar 2010 15:25:35 -0500
<>
Thu, 4 Mar 2010 15:02:20 -0500
Ken Bloomquist
Thu, 4 Mar 2010 11:36:02 -0800
Paul Edwards
Thu, 4 Mar 2010 11:45:09 -0800
Ken Bloomquist
Thu, 4 Mar 2010 11:21:01 -0800
Inge
Thu, 4 Mar 2010 11:02:07 -0800
Jonathan Galaska
Thu, 4 Mar 2010 13:45:22 -0500
Werner Engelmaier
Thu, 4 Mar 2010 13:07:09 -0500
Robert Kondner
Thu, 4 Mar 2010 13:01:52 -0500
Ken Bloomquist
Thu, 4 Mar 2010 09:20:24 -0800
New Thread Conformal Coating Issue?
Inge
Tue, 23 Mar 2010 13:54:26 -0700
Rob Strecker
Tue, 23 Mar 2010 09:10:57 -0600
Kinner, Phil
Tue, 23 Mar 2010 09:55:26 -0400
Temkin, Gregg
Tue, 23 Mar 2010 06:35:19 -0700
Douglas Pauls
Tue, 23 Mar 2010 07:53:04 -0500
Richard Kraszewski
Mon, 22 Mar 2010 15:15:25 -0500
Rob Strecker
Mon, 22 Mar 2010 14:01:55 -0600
Rob Strecker
Mon, 22 Mar 2010 13:46:07 -0600
New Thread Conformal Coatings: Resistance to Humidity and Moisture
Jerry Dengler
Tue, 16 Mar 2010 13:48:16 -0400
Douglas Pauls
Tue, 16 Mar 2010 12:39:19 -0500
Douglas Pauls
Tue, 16 Mar 2010 12:38:20 -0500
Jean-François Bissonnette
Tue, 16 Mar 2010 13:22:38 -0400
Reyes, Angel LAM2 4429
Tue, 16 Mar 2010 10:03:56 -0700
Robert Kondner
Tue, 16 Mar 2010 13:03:39 -0400
Douglas Pauls
Tue, 16 Mar 2010 11:57:18 -0500
Reyes, Angel LAM2 4429
Tue, 16 Mar 2010 09:39:07 -0700
Douglas Pauls
Tue, 16 Mar 2010 11:14:58 -0500
Jean-François Bissonnette
Tue, 16 Mar 2010 11:44:10 -0400
New Thread Deltronic, Video Comparator DVC-120
Victor Hernandez
Wed, 24 Mar 2010 07:05:18 -0500
Victor Hernandez
Fri, 19 Mar 2010 13:57:03 -0500
New Thread DuPont Sontara Stencil Wiping Paper
Leland Woodall
Thu, 11 Mar 2010 10:04:43 -0500
New Thread Eliminating interemediate washes
Brian Ellis
Tue, 16 Mar 2010 17:34:32 +0200
Douglas Pauls
Tue, 16 Mar 2010 10:19:07 -0500
Jerry Dengler
Tue, 16 Mar 2010 10:30:42 -0400
Kane, Joseph E (US SSA)
Tue, 16 Mar 2010 10:24:08 -0400
Ioan Tempea
Tue, 16 Mar 2010 10:05:57 -0400
New Thread Eliminating intermediate washes
Jerry Dengler
Tue, 16 Mar 2010 10:45:50 -0400
Mike Fenner
Tue, 16 Mar 2010 14:27:37 +0000
New Thread email off
Blair Hogg
Fri, 19 Mar 2010 07:15:39 -0500
Dean Stadem
Fri, 19 Mar 2010 05:40:44 -0500
Christopher Young
Fri, 19 Mar 2010 09:11:38 +0000
New Thread ESD Cap Plugs
Gene Felder
Wed, 31 Mar 2010 07:38:53 -0700
Kane, Joseph E (US SSA)
Wed, 31 Mar 2010 10:25:16 -0400
Bob Landman
Wed, 31 Mar 2010 10:07:59 -0400
Blair Hogg
Wed, 31 Mar 2010 08:12:59 -0500
Bruce Tostevin
Tue, 30 Mar 2010 14:05:00 -0400
Glidden, Kevin
Tue, 30 Mar 2010 13:35:41 -0400
David D. Hillman
Tue, 30 Mar 2010 11:10:22 -0500
Ken Bloomquist
Tue, 30 Mar 2010 07:47:57 -0800
Lee Whiteman
Tue, 30 Mar 2010 11:46:48 -0400
Bev Christian
Tue, 30 Mar 2010 10:17:54 -0400
Gregg Owens
Tue, 30 Mar 2010 07:04:05 -0700
New Thread ESD protection / high voltage safety question
Hernefjord Ingemar
Tue, 23 Mar 2010 09:06:34 +0100
Glidden, Kevin
Mon, 22 Mar 2010 11:20:30 -0400
Gene Felder
Mon, 22 Mar 2010 07:54:00 -0700
Rex Waygood
Mon, 22 Mar 2010 06:56:14 -0500
Guy Ramsey
Mon, 22 Mar 2010 07:23:58 -0400
Rex Waygood
Mon, 22 Mar 2010 07:31:43 +0000
Gene Felder
Fri, 19 Mar 2010 08:19:47 -0700
Drew meyer
Fri, 19 Mar 2010 09:30:51 -0500
Graham Collins
Fri, 19 Mar 2010 11:27:58 -0300
Helena Pasquito (Cobham DES SSA)
Fri, 19 Mar 2010 10:06:04 -0400
Graham Collins
Fri, 19 Mar 2010 10:33:31 -0300
New Thread Failed Ring Terminal
Paul Edwards
Wed, 31 Mar 2010 17:35:20 -0700
Paul Edwards
Wed, 31 Mar 2010 17:32:13 -0700
Bob Landman
Wed, 31 Mar 2010 20:12:54 -0400
Bob Landman
Wed, 31 Mar 2010 19:39:28 -0400
Robert Kondner
Wed, 31 Mar 2010 17:37:12 -0400
Paul Edwards
Wed, 31 Mar 2010 14:24:16 -0700
Robert Kondner
Wed, 31 Mar 2010 16:36:25 -0400
Upton, Shawn
Wed, 31 Mar 2010 16:22:57 -0400
Robert Kondner
Wed, 31 Mar 2010 15:54:32 -0400
New Thread FOD in JST Connector
John Anselmo
Thu, 25 Mar 2010 10:54:54 -0600
New Thread Formation of Sb3O2 during reflow
Bernard Asiedu
Thu, 25 Mar 2010 11:36:28 -0500
New Thread fungus question
Joyce Koo
Mon, 15 Mar 2010 07:11:52 -0400
Graham Collins
Mon, 15 Mar 2010 07:45:10 -0300
Glidden, Kevin
Fri, 12 Mar 2010 10:35:50 -0500
Glidden, Kevin
Fri, 12 Mar 2010 09:52:27 -0500
Kane, Joseph E (US SSA)
Fri, 12 Mar 2010 09:39:57 -0500
Douglas Pauls
Thu, 11 Mar 2010 16:14:37 -0600
Kane, Joseph E (US SSA)
Thu, 11 Mar 2010 16:34:28 -0500
Douglas Pauls
Thu, 11 Mar 2010 14:02:23 -0600
Inge
Thu, 11 Mar 2010 07:34:43 -0800
Dwight Mattix
Wed, 10 Mar 2010 16:11:18 -0800
Glidden, Kevin
Wed, 10 Mar 2010 12:29:05 -0500
Douglas Pauls
Wed, 10 Mar 2010 11:13:14 -0600
Temkin, Gregg
Wed, 10 Mar 2010 08:49:33 -0800
Brian Ellis
Wed, 10 Mar 2010 17:11:08 +0200
Douglas Pauls
Wed, 10 Mar 2010 08:51:56 -0600
New Thread Gold Finger Plating for High Vibration Environments
<>
Tue, 16 Mar 2010 11:28:18 -0400
Harner, Chester
Tue, 16 Mar 2010 08:07:10 -0700
bob wettermann
Tue, 16 Mar 2010 07:53:31 -0700
New Thread Hackneyed?
Hernefjord Ingemar
Thu, 4 Mar 2010 10:35:01 +0100
Robert Kondner
Wed, 3 Mar 2010 16:44:36 -0500
Inge
Wed, 3 Mar 2010 12:46:31 -0800
Werner Engelmaier
Wed, 3 Mar 2010 14:37:22 -0500
Thayer, Wayne - IIW
Wed, 3 Mar 2010 12:55:52 -0500
Inge
Wed, 3 Mar 2010 09:15:33 -0800
Hernefjord Ingemar
Tue, 2 Mar 2010 09:20:36 +0100
Werner Engelmaier
Mon, 1 Mar 2010 12:23:23 -0500
Thayer, Wayne - IIW
Mon, 1 Mar 2010 08:55:47 -0500
New Thread Hiring a Software Engineer
Steve Smith
Mon, 8 Mar 2010 11:51:41 -0500
New Thread How to solder this one
John Burke
Fri, 19 Mar 2010 14:42:49 -0700
Ioan Tempea
Fri, 19 Mar 2010 15:03:09 -0400
New Thread If you're going to IPC APEX EXPO - We have Technet Ribbons!
Joyce Koo
Thu, 4 Mar 2010 11:27:20 -0500
Douglas Pauls
Thu, 4 Mar 2010 10:10:07 -0600
Kim Sterling
Thu, 4 Mar 2010 09:52:49 -0600
New Thread IMC
Pete Houwen
Mon, 1 Mar 2010 08:39:40 -0600
New Thread John Maxwell ohoy
Inge
Wed, 31 Mar 2010 08:36:21 -0700
New Thread Kester R596L hail mary
Douglas Pauls
Wed, 24 Mar 2010 11:47:18 -0500
Steven Creswick
Wed, 24 Mar 2010 12:46:57 -0400
John Burke
Wed, 24 Mar 2010 09:47:05 -0700
Glidden, Kevin
Wed, 24 Mar 2010 12:35:29 -0400
New Thread Laser vias
Chuck Brummer
Wed, 31 Mar 2010 16:05:44 -0700
Steve Kelly
Wed, 31 Mar 2010 16:47:46 -0400
Inge
Wed, 31 Mar 2010 13:16:36 -0700
Steve Kelly
Wed, 31 Mar 2010 15:17:12 -0400
New Thread Lead forming angle and solder joint formation
John Burke
Wed, 31 Mar 2010 13:15:15 -0700
Werner Engelmaier
Wed, 31 Mar 2010 16:01:01 -0400
Kane, Amol (349)
Wed, 31 Mar 2010 15:24:16 -0400
New Thread LEAD FREE REWORK QUESTION
John Goulet
Tue, 23 Mar 2010 21:08:20 +0000
John Burke
Thu, 11 Mar 2010 23:35:52 -0800
Bob Landman
Thu, 11 Mar 2010 22:12:55 -0500
Dennis Fritz
Thu, 11 Mar 2010 13:51:07 -0500
bob wettermann
Thu, 11 Mar 2010 08:22:23 -0800
Werner Engelmaier
Thu, 11 Mar 2010 10:07:18 -0500
Roberts, Jon (SA-1)
Thu, 11 Mar 2010 08:31:21 -0600
New Thread Lead Straightning on FIne Pitch QFPs
Kane, Amol (349)
Tue, 30 Mar 2010 15:46:12 -0400
Graham Collins
Tue, 30 Mar 2010 14:09:22 -0300
Bob Landman
Tue, 30 Mar 2010 13:02:38 -0400
Bob Landman
Tue, 30 Mar 2010 12:58:48 -0400
Bob Landman
Tue, 30 Mar 2010 12:52:49 -0400
Mike Sewell
Tue, 30 Mar 2010 09:20:19 -0500
Graham Collins
Tue, 30 Mar 2010 11:05:21 -0300
Leland Woodall
Tue, 30 Mar 2010 09:51:15 -0400
Kane, Amol (349)
Tue, 30 Mar 2010 09:22:23 -0400
New Thread Long term Shelf life of electronic components
Jeremias, Michael
Fri, 26 Mar 2010 12:21:49 +0100
New Thread Low Outgassing, Black Sealant / Underfill
SUBSCRIBE Technet Karl Loh
Tue, 30 Mar 2010 19:38:47 -0500
Joyce Koo
Tue, 30 Mar 2010 09:26:49 -0400
Glidden, Kevin
Tue, 30 Mar 2010 08:54:03 -0400
Bob Landman
Mon, 29 Mar 2010 17:47:42 -0400
John Burke
Mon, 29 Mar 2010 14:18:10 -0700
Inge
Mon, 29 Mar 2010 13:49:29 -0700
Bob Landman
Mon, 29 Mar 2010 15:27:05 -0400
stephen gregory
Mon, 29 Mar 2010 07:40:35 -0700
Mike Sewell
Mon, 29 Mar 2010 08:16:25 -0500
Steven Creswick
Mon, 29 Mar 2010 09:03:18 -0400
Joyce Koo
Mon, 29 Mar 2010 08:57:32 -0400
Lee Whiteman
Mon, 29 Mar 2010 08:43:35 -0400
Guy Ramsey
Mon, 29 Mar 2010 08:32:47 -0400
Glidden, Kevin
Mon, 29 Mar 2010 08:24:53 -0400
New Thread Low Temp Solder Paste
Mike Fenner
Mon, 15 Mar 2010 08:38:10 +0000
David D. Hillman
Thu, 11 Mar 2010 07:50:14 -0600
David D. Hillman
Thu, 11 Mar 2010 07:44:42 -0600
Mike Fenner
Thu, 11 Mar 2010 08:59:59 +0000
Thayer, Wayne - IIW
Wed, 10 Mar 2010 18:39:26 -0500
David D. Hillman
Wed, 10 Mar 2010 16:33:39 -0600
Carl Ray
Wed, 10 Mar 2010 14:06:02 -0800
Werner Engelmaier
Wed, 10 Mar 2010 16:43:57 -0500
Carl Ray
Wed, 10 Mar 2010 13:09:12 -0800
New Thread More on Toyota
Bob Landman
Fri, 26 Mar 2010 20:50:09 -0400
John Goulet
Sat, 27 Mar 2010 00:15:02 +0000
Croslin, Robert
Thu, 25 Mar 2010 10:07:22 -0400
Bob Landman
Wed, 24 Mar 2010 09:39:52 -0400
John Goulet
Tue, 23 Mar 2010 20:30:38 +0000
Upton, Shawn
Fri, 19 Mar 2010 10:48:57 -0400
Pete Houwen
Fri, 19 Mar 2010 09:28:56 -0500
Croslin, Robert
Fri, 19 Mar 2010 08:22:46 -0400
Upton, Shawn
Fri, 19 Mar 2010 08:17:24 -0400
SolderMask
Thu, 18 Mar 2010 16:02:17 -0700
John Burke
Thu, 18 Mar 2010 15:57:38 -0700
Stephen Pierce
Thu, 18 Mar 2010 15:56:45 -0700
Steve Gregory
Thu, 18 Mar 2010 18:43:33 -0400
harvey
Thu, 18 Mar 2010 15:02:21 -0700
John Burke
Thu, 18 Mar 2010 14:54:02 -0700
John Burke
Thu, 18 Mar 2010 14:50:43 -0700
Bob Landman
Thu, 18 Mar 2010 17:42:50 -0400
Chris Ball
Thu, 18 Mar 2010 13:22:45 -0500
Douglas Pauls
Thu, 18 Mar 2010 13:00:04 -0500
Tontis, Theodore
Thu, 18 Mar 2010 13:27:05 -0400
John Burke
Thu, 18 Mar 2010 09:55:03 -0700
Chris Mahanna
Thu, 18 Mar 2010 12:48:00 -0400
Ken Bloomquist
Thu, 18 Mar 2010 08:05:41 -0800
Mike Buetow
Thu, 18 Mar 2010 12:16:29 -0400
R Sedlak
Thu, 18 Mar 2010 09:13:56 -0700
Mike Buetow
Thu, 18 Mar 2010 11:05:45 -0400
Harvey Miller
Mon, 8 Mar 2010 08:11:24 -0800
Croslin, Robert
Mon, 8 Mar 2010 08:23:38 -0500
Bob Landman
Fri, 5 Mar 2010 14:03:31 -0500
Joyce Koo
Fri, 5 Mar 2010 12:19:22 -0500
Gregg Owens
Fri, 5 Mar 2010 08:55:15 -0800
Ken Bloomquist
Fri, 5 Mar 2010 08:13:38 -0800
Croslin, Robert
Fri, 5 Mar 2010 11:08:53 -0500
Mike Buetow
Fri, 5 Mar 2010 10:15:18 -0500
New Thread More Than 120 New Products at IPC APEX EXPO 2010
Gayle Pervos
Fri, 12 Mar 2010 11:44:58 -0600
New Thread Need some opinions
Bev Christian
Tue, 30 Mar 2010 21:23:52 -0400
David D. Hillman
Tue, 30 Mar 2010 16:30:02 -0500
Ahne Oosterhof
Fri, 26 Mar 2010 09:13:19 -0700
Inge
Fri, 26 Mar 2010 07:35:36 -0700
vladimir Igoshev
Fri, 26 Mar 2010 13:48:01 +0000
Guy Ramsey
Fri, 26 Mar 2010 08:02:45 -0400
Bev Christian
Fri, 26 Mar 2010 06:20:32 -0400
Fox, Ian
Fri, 26 Mar 2010 09:20:08 +0000
Inge
Fri, 26 Mar 2010 00:11:06 -0700
Bev Christian
Thu, 25 Mar 2010 21:58:27 -0400
stephengregory5849
Thu, 25 Mar 2010 21:49:18 -0400
Bev Christian
Thu, 25 Mar 2010 21:08:15 -0400
New Thread No Clean Flux Activation Temps
Karen Tellefsen
Thu, 25 Mar 2010 13:33:38 -0500
Douglas Pauls
Thu, 25 Mar 2010 13:10:57 -0500
Leland Woodall
Thu, 25 Mar 2010 13:30:35 -0400
New Thread NTC - Friday Elemental Trivia Question
Douglas Pauls
Fri, 12 Mar 2010 12:29:50 -0600
Whittaker, Dewey (EHCOE)
Fri, 12 Mar 2010 10:54:39 -0700
Graham Naisbitt
Fri, 12 Mar 2010 17:41:57 +0000
Paul Reid
Fri, 12 Mar 2010 12:36:47 -0500
David D. Hillman
Fri, 12 Mar 2010 11:20:04 -0600
Mumtaz Bora
Fri, 12 Mar 2010 09:21:11 -0800
Inge
Fri, 12 Mar 2010 09:13:32 -0800
Roberts, Jon (SA-1)
Fri, 12 Mar 2010 11:12:34 -0600
Inge
Fri, 12 Mar 2010 09:06:26 -0800
Victor Hernandez
Fri, 12 Mar 2010 11:04:55 -0600
Drew meyer
Fri, 12 Mar 2010 10:34:23 -0600
Joyce Koo
Fri, 12 Mar 2010 11:34:34 -0500
Nigel Burtt
Fri, 12 Mar 2010 10:01:29 -0600
Joe Russeau
Fri, 12 Mar 2010 11:07:15 -0500
Kane, Joseph E (US SSA)
Fri, 12 Mar 2010 10:58:35 -0500
Kenneth Wood
Fri, 12 Mar 2010 10:26:29 -0500
Paul Reid
Fri, 12 Mar 2010 10:25:35 -0500
Graham Naisbitt
Fri, 12 Mar 2010 15:24:48 +0000
David D. Hillman
Fri, 12 Mar 2010 09:08:53 -0600
New Thread NTC - Friday Elemental Trivia Question - The Winner
Douglas Pauls
Mon, 15 Mar 2010 06:44:20 -0500
Nigel Burtt
Mon, 15 Mar 2010 05:26:12 -0500
Graham Naisbitt
Fri, 12 Mar 2010 22:45:21 +0000
David D. Hillman
Fri, 12 Mar 2010 16:27:22 -0600
New Thread NTC Nothing to do with T@Y@TA
Blair Hogg
Fri, 19 Mar 2010 21:03:48 -0500
Ian Hanna
Fri, 19 Mar 2010 12:30:13 -0400
Ken Bloomquist
Fri, 19 Mar 2010 07:41:50 -0800
John Burke
Fri, 19 Mar 2010 08:16:28 -0700
New Thread OOPS - Via-in-Pad BGA - Sort Of
John Parsons
Wed, 3 Mar 2010 15:31:19 -0800
New Thread Orange Peel Termination Finish
Mike Fenner
Tue, 30 Mar 2010 11:04:35 +0100
stephengregory5849
Thu, 25 Mar 2010 21:03:30 -0400
Richard Kraszewski
Thu, 25 Mar 2010 17:07:14 -0500
David D. Hillman
Thu, 25 Mar 2010 13:10:23 -0500
Kane, Joseph E (US SSA)
Thu, 25 Mar 2010 11:56:29 -0400
Kane, Joseph E (US SSA)
Thu, 25 Mar 2010 11:34:07 -0400
Phil Nutting
Thu, 25 Mar 2010 11:13:56 -0400
Steve Gregory
Thu, 25 Mar 2010 10:42:53 -0400
David D. Hillman
Thu, 25 Mar 2010 08:46:47 -0500
Douglas Pauls
Thu, 25 Mar 2010 08:45:45 -0500
Kane, Joseph E (US SSA)
Thu, 25 Mar 2010 09:38:11 -0400
New Thread Organic Metal Nano surface finish
Shanmugam, Nagaraj
Tue, 16 Mar 2010 11:42:55 +0530
New Thread PAGODERING OR SMILING
Post, Scott E
Fri, 5 Mar 2010 11:16:15 -0500
Werner Engelmaier
Fri, 5 Mar 2010 11:05:51 -0500
Mike Sewell
Fri, 5 Mar 2010 09:11:08 -0600
Post, Scott E
Fri, 5 Mar 2010 09:56:54 -0500
Hernefjord Ingemar
Fri, 5 Mar 2010 15:45:57 +0100
Christopher Young
Fri, 5 Mar 2010 13:59:54 +0000
Dean Stadem
Fri, 5 Mar 2010 07:54:50 -0600
Dean Stadem
Fri, 5 Mar 2010 07:39:57 -0600
Dean Stadem
Fri, 5 Mar 2010 07:32:50 -0600
Hernefjord Ingemar
Fri, 5 Mar 2010 10:19:15 +0100
Christopher Young
Fri, 5 Mar 2010 08:47:27 +0000
New Thread Partial NTC - [TN] fungus question/BGA voids
Hernefjord Ingemar
Fri, 12 Mar 2010 10:20:05 +0100
David D. Hillman
Thu, 11 Mar 2010 16:52:37 -0600
New Thread PCBA Test
Gobinathan Athimolom
Wed, 10 Mar 2010 10:42:09 +0800
Rex Waygood
Tue, 9 Mar 2010 14:33:10 +0000
Blair Hogg
Tue, 9 Mar 2010 07:24:58 -0600
John Burke
Mon, 8 Mar 2010 09:07:17 -0800
Gobinathan Athimolom
Mon, 8 Mar 2010 15:36:39 +0800
New Thread Personal radiation device for X-ray machine
Eric CHRISTISON
Sun, 28 Mar 2010 19:26:28 +0100
Bob Landman
Sun, 28 Mar 2010 10:39:23 -0400
John Burke
Sat, 27 Mar 2010 21:46:03 -0700
Bev Christian
Sat, 27 Mar 2010 15:49:40 -0400
Lum Wee Mei
Sat, 27 Mar 2010 21:54:33 +0800
Bev Christian
Sat, 27 Mar 2010 09:14:22 -0400
Guy Ramsey
Sat, 27 Mar 2010 08:55:02 -0400
Bev Christian
Sat, 27 Mar 2010 07:42:22 -0400
Lum Wee Mei
Sat, 27 Mar 2010 17:02:44 +0800
New Thread pin hole surafce mount joint
Joseph Khiew
Wed, 10 Mar 2010 18:51:28 -0600
Paul Edwards
Tue, 9 Mar 2010 20:43:06 -0800
Joseph Khiew
Tue, 9 Mar 2010 21:48:04 -0600
New Thread Poll: EMS Part numbering systems
Leif Erik Laerum
Thu, 18 Mar 2010 11:23:49 -0500
Croslin, Robert
Thu, 18 Mar 2010 09:14:06 -0400
Larry Dzaugis
Wed, 17 Mar 2010 17:57:46 -0500
Thayer, Wayne - IIW
Wed, 17 Mar 2010 13:31:06 -0400
Don McFarland
Tue, 16 Mar 2010 11:25:42 -0600
Graham Collins
Tue, 16 Mar 2010 14:02:30 -0300
Robert Kondner
Tue, 16 Mar 2010 12:55:09 -0400
Glidden, Kevin
Tue, 16 Mar 2010 12:54:01 -0400
Rex Waygood
Tue, 16 Mar 2010 16:34:06 +0000
Peter Wong
Tue, 16 Mar 2010 08:22:00 -0700
New Thread POP Technology
Christopher Young
Wed, 17 Mar 2010 08:39:11 +0000
New Thread Press fit connectors
John Goulet
Tue, 2 Mar 2010 03:09:48 +0000
Linda Langley
Mon, 1 Mar 2010 06:07:06 -0500
New Thread Prodasic
John Burke
Fri, 26 Mar 2010 15:37:14 -0700
Inge
Fri, 26 Mar 2010 15:06:04 -0700
Ken Bloomquist
Fri, 26 Mar 2010 08:33:41 -0800
Leigh-Ann Litavis
Fri, 26 Mar 2010 12:11:21 -0400
New Thread R: [TN] Reflow Oven Comparison and Qualification
Gabriele Sala
Wed, 17 Mar 2010 19:02:31 +0100
New Thread Reflow Oven Comparison and Qualification
Bob Landman
Thu, 18 Mar 2010 09:22:50 -0400
LE QUOC
Thu, 18 Mar 2010 07:55:29 +0700
Carl Ray
Wed, 17 Mar 2010 13:21:57 -0700
Reuven Rokah
Wed, 17 Mar 2010 22:11:19 +0200
Lee Whiteman
Wed, 17 Mar 2010 15:08:35 -0400
Jerry Dengler
Wed, 17 Mar 2010 14:06:47 -0400
Werner Engelmaier
Wed, 17 Mar 2010 13:56:32 -0400
C H Huang
Wed, 17 Mar 2010 10:14:01 -0700
Leland Woodall
Wed, 17 Mar 2010 13:06:05 -0400
Leland Woodall
Wed, 17 Mar 2010 12:38:45 -0400
Leland Woodall
Wed, 17 Mar 2010 12:37:46 -0400
Werner Engelmaier
Wed, 17 Mar 2010 12:30:21 -0400
Glidden, Kevin
Wed, 17 Mar 2010 12:16:02 -0400
Robert Kondner
Wed, 17 Mar 2010 11:50:29 -0400
Leland Woodall
Wed, 17 Mar 2010 10:34:55 -0400
New Thread Regarding PCB EDGE to Copper Spacing for V scoring./v grooving
Victor Hernandez
Wed, 17 Mar 2010 07:33:20 -0500
James Mahoney
Tue, 16 Mar 2010 09:44:11 -0400
Steve Gregory
Mon, 15 Mar 2010 18:28:20 -0400
Anand Paliwal - ERS, HCL Tech
Tue, 16 Mar 2010 02:58:37 +0530
New Thread Request to IPC
Inge
Sun, 21 Mar 2010 13:29:06 -0700
Stephen Pierce
Fri, 19 Mar 2010 10:16:30 -0700
Drew meyer
Fri, 19 Mar 2010 09:48:01 -0500
Terry D Kozlyk
Fri, 19 Mar 2010 07:49:45 -0600
Brian Ellis
Fri, 19 Mar 2010 15:18:29 +0200
New Thread Roger Wild References
Werner Engelmaier
Mon, 1 Mar 2010 16:10:53 -0500
Mike Fenner
Mon, 1 Mar 2010 10:06:14 +0000
New Thread RoHS and T-----
Gary Crowell
Fri, 19 Mar 2010 17:46:26 -0600
Gregg Owens
Fri, 19 Mar 2010 11:34:55 -0700
Bob Landman
Fri, 19 Mar 2010 14:15:04 -0400
New Thread Rough surface of glass diode (Fairchild 1N4148)
Steven Creswick
Wed, 10 Mar 2010 12:42:13 -0500
Dave He
Wed, 10 Mar 2010 08:19:57 -0800
New Thread SAC thermal life model
Werner Engelmaier
Thu, 4 Mar 2010 23:09:06 -0500
al shirazi
Thu, 4 Mar 2010 14:54:23 -0800
New Thread Seeking for advice on buried capacitance material selection
Charming Chan
Sun, 7 Mar 2010 04:35:42 -0500
New Thread Selective Solder Equipment
John Goulet
Fri, 26 Mar 2010 15:57:00 +0000
Graham Naisbitt
Fri, 26 Mar 2010 09:09:17 +0000
PBenke
Thu, 25 Mar 2010 11:49:17 -0700
New Thread Selective Solder Equipment 2nd attemp
John Goulet
Fri, 26 Mar 2010 16:45:51 +0000
New Thread SFP cable ----Help
Tonyliu
Mon, 8 Mar 2010 21:43:53 +0800
New Thread So sorry - I keep forgetting to add HTTP when I post here. Technet Photos.
Kim Sterling
Mon, 15 Mar 2010 12:04:02 -0500
New Thread Solder Paste Height Measurement Software/Devices
Dacia Schoolfield
Tue, 2 Mar 2010 17:29:02 -0600
New Thread Solder volume verification system
Brian Chandler
Tue, 16 Mar 2010 06:44:49 -0500
Tontis, Theodore
Mon, 15 Mar 2010 13:04:15 -0400
New Thread SPAM-LOW: [TN] Organic Metal Nano surface finish
Shanmugam, Nagaraj
Wed, 17 Mar 2010 10:13:52 +0530
harvey
Tue, 16 Mar 2010 21:31:41 -0700
New Thread Special purpose soldermask
Graham Naisbitt
Wed, 3 Mar 2010 11:26:49 +0000
Lamar Young
Tue, 2 Mar 2010 14:49:53 -0500
Ioan Tempea
Tue, 2 Mar 2010 13:11:28 -0500
Whittaker, Dewey (EHCOE)
Tue, 2 Mar 2010 10:55:45 -0700
Ioan Tempea
Tue, 2 Mar 2010 07:57:10 -0500
New Thread Strip immersion Ag and rebuild with OSP.
Paul Edwards
Thu, 11 Mar 2010 11:12:30 -0800
Lee parker
Thu, 11 Mar 2010 13:59:26 -0500
Charming Chan
Thu, 11 Mar 2010 09:51:45 -0500
New Thread Substrate life for BGA substrates
Hernefjord Ingemar
Fri, 19 Mar 2010 09:14:12 +0100
Joyce Koo
Tue, 16 Mar 2010 13:50:43 -0400
John Burke
Tue, 16 Mar 2010 10:15:19 -0700
New Thread Suggestions on Making BGA Voids
Kane, Amol (349)
Mon, 8 Mar 2010 08:41:35 -0500
Mike Fenner
Tue, 2 Mar 2010 17:26:36 +0000
Thayer, Wayne - IIW
Mon, 1 Mar 2010 09:07:59 -0500
New Thread Tear drops?
Braddock, Iain (UK)
Tue, 30 Mar 2010 10:06:33 +0100
New Thread TechNet Digest - 27 Feb 2010 to 28 Feb 2010 (#2010-58)
Sami Nurmi
Mon, 1 Mar 2010 09:25:20 +0200
New Thread Technet photo posting site now available
Kim Sterling
Wed, 17 Mar 2010 16:16:13 -0500
Victor Hernandez
Wed, 17 Mar 2010 09:04:42 -0500
Victor Hernandez
Wed, 17 Mar 2010 07:27:26 -0500
Kim Sterling
Tue, 16 Mar 2010 09:00:59 -0500
Pete Houwen
Tue, 16 Mar 2010 08:24:01 -0500
Ioan Tempea
Mon, 15 Mar 2010 13:27:48 -0400
Paul Reid
Mon, 15 Mar 2010 13:03:01 -0400
Rex Waygood
Mon, 15 Mar 2010 17:02:06 +0000
Kim Sterling
Mon, 15 Mar 2010 11:44:55 -0500
New Thread Technical Bullitens for American cars, recalls on foreign cars
John Goulet
Tue, 23 Mar 2010 20:58:38 +0000
New Thread thermo shock cycles
Werner Engelmaier
Thu, 18 Mar 2010 16:33:24 -0400
Paul Reid
Thu, 18 Mar 2010 14:33:54 -0400
Werner Engelmaier
Thu, 18 Mar 2010 11:41:55 -0400
Paul Reid
Wed, 17 Mar 2010 10:14:03 -0400
Joyce Koo
Tue, 16 Mar 2010 13:42:17 -0400
Torsten Hagge
Tue, 16 Mar 2010 16:54:46 +0100
New Thread TI/Emerson SMT Board Mounted Power
Werner Engelmaier
Thu, 25 Mar 2010 17:07:37 -0400
Robert Kondner
Thu, 25 Mar 2010 09:02:04 -0400
Werner Engelmaier
Wed, 24 Mar 2010 14:21:25 -0400
Ahne Oosterhof
Wed, 24 Mar 2010 10:00:33 -0700
Bob Landman
Wed, 24 Mar 2010 07:33:23 -0400
Bob Landman
Wed, 24 Mar 2010 07:26:15 -0400
Werner Engelmaier
Tue, 23 Mar 2010 16:47:31 -0400
Thayer, Wayne - IIW
Tue, 23 Mar 2010 16:34:20 -0400
Nowland, Russell Howard (Russell)
Tue, 23 Mar 2010 15:14:02 -0500
Werner Engelmaier
Tue, 23 Mar 2010 15:30:13 -0400
Bob Landman
Tue, 23 Mar 2010 14:42:54 -0400
Graham Collins
Tue, 23 Mar 2010 09:45:08 -0300
Guy Ramsey
Tue, 23 Mar 2010 07:37:12 -0400
Paul Edwards
Mon, 22 Mar 2010 15:27:33 -0700
Steven Creswick
Mon, 22 Mar 2010 16:13:47 -0400
Nowland, Russell Howard (Russell)
Mon, 22 Mar 2010 14:57:06 -0500
New Thread Tin Whiskers
Steve Kelly
Thu, 25 Mar 2010 14:24:36 -0400
Bob Landman
Thu, 25 Mar 2010 13:13:39 -0400
David D. Hillman
Thu, 25 Mar 2010 08:44:24 -0500
Joyce Koo
Thu, 25 Mar 2010 09:16:18 -0400
David D. Hillman
Thu, 25 Mar 2010 07:40:22 -0500
Graham Naisbitt
Thu, 25 Mar 2010 11:23:53 +0000
vladimir Igoshev
Wed, 24 Mar 2010 22:51:54 +0000
Inge
Wed, 24 Mar 2010 15:32:36 -0700
Inge
Wed, 24 Mar 2010 14:07:34 -0700
David D. Hillman
Wed, 24 Mar 2010 15:40:08 -0500
Steve Kelly
Wed, 24 Mar 2010 12:30:49 -0500
New Thread Tips on plastic BGA's to cure Smiling or Pagodering
Christopher Young
Tue, 9 Mar 2010 14:49:46 +0000
New Thread Unusual Assembly Requirement...
Pete Houwen
Thu, 4 Mar 2010 12:35:05 -0600
Bob Landman
Wed, 3 Mar 2010 18:06:54 -0500
Robert Kondner
Wed, 3 Mar 2010 12:30:34 -0500
Dwight Mattix
Wed, 3 Mar 2010 09:24:45 -0800
Guy Ramsey
Wed, 3 Mar 2010 11:42:39 -0500
Mickey Weiner
Wed, 3 Mar 2010 17:26:22 +0200
Ken Bloomquist
Wed, 3 Mar 2010 06:34:26 -0800
Pete Houwen
Wed, 3 Mar 2010 08:46:32 -0600
Victor Hernandez
Wed, 3 Mar 2010 05:08:34 -0600
David D. Hillman
Tue, 2 Mar 2010 18:33:16 -0600
Ioan Tempea
Tue, 2 Mar 2010 15:59:12 -0500
McGlaughlin, Jeffrey A
Tue, 2 Mar 2010 15:56:21 -0500
Joe Fjelstad
Tue, 2 Mar 2010 15:54:39 -0500
Steve Gregory
Tue, 2 Mar 2010 15:38:54 -0500
Lee parker
Tue, 2 Mar 2010 15:36:49 -0500
Nowland, Russell Howard (Russell)
Tue, 2 Mar 2010 14:10:12 -0600
Werner Engelmaier
Tue, 2 Mar 2010 15:11:47 -0500
Jean-François Bissonnette
Tue, 2 Mar 2010 15:05:35 -0500
Roberts, Jon (SA-1)
Tue, 2 Mar 2010 14:04:01 -0600
Steve Gregory
Tue, 2 Mar 2010 14:52:08 -0500
New Thread V-score VS routed edge
Steven Creswick
Mon, 29 Mar 2010 14:29:04 -0400
Jerry Dengler
Mon, 29 Mar 2010 13:53:03 -0400
New Thread Vibration issue
SUBSCRIBE Technet Karl Loh
Tue, 30 Mar 2010 19:45:46 -0500
Joyce Koo
Mon, 15 Mar 2010 07:39:59 -0400
Hernefjord Ingemar
Mon, 15 Mar 2010 12:26:46 +0100
Joyce Koo
Mon, 15 Mar 2010 07:17:11 -0400
Hernefjord Ingemar
Mon, 15 Mar 2010 12:03:51 +0100
Eric CHRISTISON
Mon, 15 Mar 2010 10:09:18 +0000
Inge
Sat, 13 Mar 2010 04:56:38 -0800
Tan Geok Ang
Sat, 13 Mar 2010 09:23:14 +0800
David D. Hillman
Fri, 12 Mar 2010 16:32:48 -0600
Inge
Fri, 12 Mar 2010 14:15:17 -0800
Inge
Fri, 12 Mar 2010 14:01:02 -0800
Inge
Fri, 12 Mar 2010 13:44:09 -0800
Inge
Fri, 12 Mar 2010 13:36:43 -0800
John Burke
Fri, 12 Mar 2010 13:35:52 -0800
John Burke
Fri, 12 Mar 2010 13:22:40 -0800
Werner Engelmaier
Fri, 12 Mar 2010 16:19:31 -0500
Steve Gregory
Fri, 12 Mar 2010 16:15:11 -0500
Inge
Fri, 12 Mar 2010 13:07:42 -0800
Inge
Fri, 12 Mar 2010 12:52:20 -0800
Thayer, Wayne - IIW
Fri, 12 Mar 2010 14:18:46 -0500
Chris Ball
Fri, 12 Mar 2010 14:00:02 -0500
Inge
Fri, 12 Mar 2010 10:47:58 -0800
New Thread What exactly is Organic Flux?
Karen Tellefsen
Wed, 31 Mar 2010 11:13:07 -0500
Julien Meyer
Wed, 31 Mar 2010 12:39:48 -0300
Kane, Joseph E (US SSA)
Wed, 31 Mar 2010 11:09:13 -0400
Karen Tellefsen
Wed, 31 Mar 2010 10:09:19 -0500
Genny Gibbard
Wed, 31 Mar 2010 08:42:19 -0600
Julien Meyer
Wed, 31 Mar 2010 11:41:08 -0300
Karen Tellefsen
Wed, 31 Mar 2010 09:32:40 -0500
Kane, Joseph E (US SSA)
Wed, 31 Mar 2010 09:57:43 -0400
Julien Meyer
Wed, 31 Mar 2010 10:15:15 -0300
New Thread Wire bondable gold
Joyce Koo
Wed, 31 Mar 2010 20:28:25 -0400
Steven Creswick
Wed, 31 Mar 2010 19:55:37 -0400
Inge
Wed, 31 Mar 2010 13:42:31 -0700
Steve Kelly
Wed, 31 Mar 2010 16:10:06 -0400
Inge
Wed, 31 Mar 2010 12:52:30 -0700
<>
Wed, 31 Mar 2010 19:50:24 +0000
Steve Kelly
Wed, 31 Mar 2010 14:20:11 -0500
New Thread [LF] More importantly.... 8 new substances proposed for REACH control
Bob Landman
Tue, 16 Mar 2010 22:32:55 -0400
Dean Stadem
Tue, 16 Mar 2010 19:07:49 -0500
New Thread [LF] Soldering with NanoFoil
Mike Fenner
Fri, 5 Mar 2010 14:45:47 +0000
New Thread [LF] Soldering with Nanofoils
Steven Creswick
Thu, 4 Mar 2010 16:14:17 -0500
Bev Christian
Thu, 4 Mar 2010 15:45:43 -0500
Robert Kondner
Thu, 4 Mar 2010 15:29:59 -0500
Steven Creswick
Thu, 4 Mar 2010 13:34:09 -0500
New Thread [NTC] It depends...mountain dew
Gregg Owens
Mon, 8 Mar 2010 12:57:03 -0800
Glidden, Kevin
Mon, 8 Mar 2010 15:30:38 -0500
New Thread [NTC] More on Toyota
Stephen Pierce
Thu, 18 Mar 2010 09:46:04 -0700
New Thread [TN] Formation of Sb3O2 during reflow
Bernard Asiedu
Wed, 31 Mar 2010 15:40:52 -0400
New Thread [TN] Kester R596L hail mary
harvey
Wed, 24 Mar 2010 13:16:10 -0700

ATOM RSS1 RSS2