TECHNET Archives

September 2009

TechNet@IPC.ORG
Options: Hide Table of Contents

Abroad Printed Circuit Board supplier checklist (9 Messages)
Acceptability of Printed Boards (Solder Mask) (3 Messages)
Acoustic Microscopy for Under fill Coverage (17 Messages)
Acoustic Microscopy for Underfill Coverage (3 Messages)
Adhesion tape test (8 Messages)
Adhesion Testing of Brush Plating (9 Messages)
Antwort: Re: [TN] D2PAK-3 Component On Secondry Side (1 Message)
Antwort: Re: [TN] Need clever comments (1 Message)
AW: [TN] Knock, knock, knock on the heaven's door (2 Messages)
Bare Board Moisture Content Standard (8 Messages)
BGA Pb-free, this is what I feared: Tin whiskers (10 Messages)
BGA Voids (6 Messages)
BGA/LGA land shape versus assembly yield reliability (14 Messages)
Black Pad (15 Messages)
Bulk Chip Component Feeders (5 Messages)
CADMIUM RoHS RUMOR (3 Messages)
CE expert (1 Message)
cleaning circuit boards (2 Messages)
Component Staking (3 Messages)
CRITERIA FOR USE OF SOLDER SLEEVES (3 Messages)
D2PAK-3 Component On Secondry Side (6 Messages)
Double sided reflow? (4 Messages)
ENIG / HASL CO-PLANARITY (17 Messages)
fractured SJs due to soldermask compression (22 Messages)
fractured SJs due to soldermask compression OR soldermask-defined BGA pad problems (2 Messages)
Gel-Flex for MPM (1 Message)
Germicides and Electronics...deadly mix? (7 Messages)
Ground Pour Under BGA (41 Messages)
Hakko FR-802 (5 Messages)
High Speed Rigid-Flex PCB Design (2 Messages)
How to search in IPC archive (1 Message)
Hydrobromic Acid containing flux (16 Messages)
IAg PCBs. Re-plating? (9 Messages)
Identities (4 Messages)
Imm Sn soldering issue. (11 Messages)
Immersion Silver for Class 3 Boards (16 Messages)
IPC-610 vs lab results (4 Messages)
Is firewall/spam filter blocking forum mails? (2 Messages)
Is Steve still helping with uploading pictures? (2 Messages)
Job security for REACH (1 Message)
Knock, knock, knock on the heaven's door (22 Messages)
Lacing Tape, wax impregnated or not (3 Messages)
Looking for Data Sheet on ADC-914 (1 Message)
Making a stencil from OBD++ Files (7 Messages)
Mil-Std-130 vs Mil-Std-1285 (marking specifications) (3 Messages)
Mixed Flowing Gas Chambers (1 Message)
MRP systems (15 Messages)
N1H1 flu/germs/cleaning ESD mats (2 Messages)
Need clever comments (77 Messages)
Need clever comments (NTC) (1 Message)
Need clever comments, closed , additional (1 Message)
Need clever comments, closed . (1 Message)
Need clever comments- A detail (2 Messages)
New standard revisions (1 Message)
Non Wetting Problem (5 Messages)
NTC RE: [TN] Lacing Tape, wax impregnated or not (2 Messages)
NTC [TN] Hydrobromic Acid containing flux (1 Message)
NTC: ground Zero (3 Messages)
NTC: I made it to Allentown! (1 Message)
Plug vias first or second. (9 Messages)
PTH Cracking with NiAu and Compliant Pin (5 Messages)
PTH problem (17 Messages)
recommended screw tightening sequence for various patterns (2 Messages)
SAC-305 IMAGE (2 Messages)
Sealing edges of thick G-10 (3 Messages)
shelf life of pcbs (4 Messages)
silicone conformal coat removal (21 Messages)
SMART Group 25th Anniversary Event - Oct 22nd UK (1 Message)
SN63 Shear Strength over temp (3 Messages)
Solder Mask Question (11 Messages)
Soldering of coax cable on PCB (3 Messages)
Steve's Missing Wallet (3 Messages)
TechNet Digest - 17 Sep 2009 (#2009-292) (1 Message)
Teflon and SVHCs (11 Messages)
Test Post (2 Messages)
Testing (3 Messages)
Testing NTC (1 Message)
Tin Lead Plate Specification (3 Messages)
tin redeposit??? (5 Messages)
Trilayer Prototypes (1 Message)
UV can't see on the board (3 Messages)
Very Interesting Link! (4 Messages)
Voiding paper (4 Messages)
What through-hole components cause the most process issues? (8 Messages)
[BULK] [TN] Abroad Printed Circuit Board supplier checklist (2 Messages)
[LF] Challenges of Lead-free Electronics - article in SMT by Laura J. Tur... (1 Message)
[LF] Challenges of Lead-free Electronics - article in SMT by Laura J. Turbini (1 Message)
[LF] electronics recycling in China (4 Messages)
[LF] Lasky looks at RoHS 3 years later (3 Messages)
[NTC] Eye Tooth (1 Message)
[spam] RE: [TN] Germicides and Electronics...deadly mix? (1 Message)
[spam] Tooling for SMT assembly of Flexi PCB's (1 Message)
[TN] BGA Pb-free, this is what I feared: Tin whiskers (1 Message)
[TN] fractured SJs due to soldermask compression (1 Message)
[TN] Need clever comments (1 Message)
~235 C solder recommendations (1 Message)

Subject Sorted by Subject, Chronologically

From

Date
New Thread Abroad Printed Circuit Board supplier checklist
Re: Abroad Printed Circuit Board supplier checklist
Dave Schaefer
Thu, 24 Sep 2009 09:33:03 -0500
Re: Abroad Printed Circuit Board supplier checklist
Sherif Refaat
Thu, 24 Sep 2009 08:51:29 -0400
Re: Abroad Printed Circuit Board supplier checklist
Werner Engelmaier /*
Wed, 23 Sep 2009 22:43:28 -0400
Re: Abroad Printed Circuit Board supplier checklist
Stadem, Richard D.
Wed, 23 Sep 2009 14:24:49 -0500
Re: Abroad Printed Circuit Board supplier checklist
Hetal Shah
Wed, 23 Sep 2009 12:05:25 -0700
Re: Abroad Printed Circuit Board supplier checklist
Eric Kalgren
Wed, 23 Sep 2009 14:32:34 -0400
Re: Abroad Printed Circuit Board supplier checklist
McGlaughlin, Jeffrey A
Wed, 23 Sep 2009 14:28:46 -0400
Re: Abroad Printed Circuit Board supplier checklist
Ioan Tempea
Wed, 23 Sep 2009 14:01:58 -0400
Abroad Printed Circuit Board supplier checklist
J W
Wed, 23 Sep 2009 13:26:47 -0400
New Thread Acceptability of Printed Boards (Solder Mask)
Re: Acceptability of Printed Boards (Solder Mask)
S.Huetter
Fri, 4 Sep 2009 08:16:24 +0200
Re: Acceptability of Printed Boards (Solder Mask)
Chuck Brummer
Thu, 3 Sep 2009 13:06:31 -0700
Acceptability of Printed Boards (Solder Mask)
J W
Thu, 3 Sep 2009 15:55:14 -0400
New Thread Acoustic Microscopy for Under fill Coverage
Re: Acoustic Microscopy for Under fill Coverage
Inge
Tue, 22 Sep 2009 20:54:06 +0200
Re: Acoustic Microscopy for Under fill Coverage
Bev Christian
Tue, 22 Sep 2009 08:25:38 -0400
Re: Acoustic Microscopy for Under fill Coverage
Graham Collins
Tue, 22 Sep 2009 09:01:50 -0300
Re: Acoustic Microscopy for Under fill Coverage
Vladimir Igoshev
Tue, 22 Sep 2009 11:39:24 +0000
Re: Acoustic Microscopy for Under fill Coverage
Kane, Amol (349)
Tue, 22 Sep 2009 07:30:22 -0400
Re: Acoustic Microscopy for Under fill Coverage
David D. Hillman
Mon, 21 Sep 2009 22:11:54 -0500
Re: Acoustic Microscopy for Under fill Coverage
Stadem, Richard D.
Mon, 21 Sep 2009 19:23:36 -0500
Re: Acoustic Microscopy for Under fill Coverage
Stadem, Richard D.
Mon, 21 Sep 2009 19:21:30 -0500
Re: Acoustic Microscopy for Under fill Coverage
Vladimir Igoshev
Tue, 22 Sep 2009 00:17:39 +0000
Re: Acoustic Microscopy for Under fill Coverage
John Burke
Mon, 21 Sep 2009 16:47:05 -0700
Re: Acoustic Microscopy for Under fill Coverage
Werner Engelmaier /*
Mon, 21 Sep 2009 19:35:38 -0400
Re: Acoustic Microscopy for Under fill Coverage
Vladimir Igoshev
Mon, 21 Sep 2009 23:30:22 +0000
Re: Acoustic Microscopy for Under fill Coverage
Werner Engelmaier /*
Mon, 21 Sep 2009 19:17:41 -0400
Re: Acoustic Microscopy for Under fill Coverage
Vladimir Igoshev
Mon, 21 Sep 2009 22:47:47 +0000
Re: Acoustic Microscopy for Under fill Coverage
David D. Hillman
Mon, 21 Sep 2009 17:30:36 -0500
Re: Acoustic Microscopy for Under fill Coverage
Bev Christian
Mon, 21 Sep 2009 18:16:30 -0400
Re: Acoustic Microscopy for Under fill Coverage
John Burke
Mon, 21 Sep 2009 15:00:16 -0700
New Thread Acoustic Microscopy for Underfill Coverage
Re: Acoustic Microscopy for Underfill Coverage
Bev Christian
Mon, 21 Sep 2009 17:06:47 -0400
Re: Acoustic Microscopy for Underfill Coverage
Wenger, George M.
Mon, 21 Sep 2009 16:24:27 -0400
Acoustic Microscopy for Underfill Coverage
Kane, Amol (349)
Mon, 21 Sep 2009 14:40:48 -0400
New Thread Adhesion tape test
Re: Adhesion tape test
Stadem, Richard D.
Wed, 2 Sep 2009 13:01:43 -0500
Re: Adhesion tape test
Inge
Wed, 2 Sep 2009 19:38:54 +0200
Re: Adhesion tape test
Mike Sewell
Wed, 2 Sep 2009 12:14:16 -0500
Re: Adhesion tape test
Inge
Wed, 2 Sep 2009 19:11:15 +0200
Re: Adhesion tape test
Chris Mahanna
Wed, 2 Sep 2009 12:50:31 -0400
Re: Adhesion tape test
Peter Swanson
Wed, 2 Sep 2009 17:06:49 +0100
Re: Adhesion tape test
Inge
Wed, 2 Sep 2009 18:05:44 +0200
Adhesion tape test
Lamar Young
Wed, 2 Sep 2009 11:49:53 -0400
New Thread Adhesion Testing of Brush Plating
Re: Adhesion Testing of Brush Plating
Carroll, Thomas A
Thu, 24 Sep 2009 06:53:36 -0700
Re: Adhesion Testing of Brush Plating
Eric CHRISTISON
Thu, 24 Sep 2009 14:46:34 +0100
Re: Adhesion Testing of Brush Plating
Carroll, Thomas A
Thu, 24 Sep 2009 06:10:26 -0700
Re: Adhesion Testing of Brush Plating
Mike Sewell
Thu, 24 Sep 2009 08:04:26 -0500
Re: Adhesion Testing of Brush Plating
Carroll, Thomas A
Thu, 24 Sep 2009 04:55:32 -0700
Re: Adhesion Testing of Brush Plating
Joyce Koo
Wed, 23 Sep 2009 18:10:38 -0400
Re: Adhesion Testing of Brush Plating
Carroll, Thomas A
Wed, 23 Sep 2009 14:29:42 -0700
Re: Adhesion Testing of Brush Plating
Joyce Koo
Wed, 23 Sep 2009 17:22:04 -0400
Adhesion Testing of Brush Plating
Carroll, Thomas A
Wed, 23 Sep 2009 14:20:02 -0700
New Thread Antwort: Re: [TN] D2PAK-3 Component On Secondry Side
Antwort: Re: [TN] D2PAK-3 Component On Secondry Side
Frank Kriesch
Wed, 23 Sep 2009 10:37:17 +0200
New Thread Antwort: Re: [TN] Need clever comments
Antwort: Re: [TN] Need clever comments
Frank Kriesch
Tue, 8 Sep 2009 16:19:40 +0200
New Thread AW: [TN] Knock, knock, knock on the heaven's door
AW: [TN] Knock, knock, knock on the heaven's door
Grossmann, Guenter
Wed, 23 Sep 2009 13:55:46 +0200
AW: [TN] Knock, knock, knock on the heaven's door
Grossmann, Guenter
Wed, 23 Sep 2009 09:40:45 +0200
New Thread Bare Board Moisture Content Standard
Re: Bare Board Moisture Content Standard
Stadem, Richard D.
Mon, 14 Sep 2009 11:08:52 -0500
Re: Bare Board Moisture Content Standard
Schaefer, Chris
Mon, 14 Sep 2009 08:01:43 -0700
Re: Bare Board Moisture Content Standard
Werner Engelmaier /*
Sun, 13 Sep 2009 12:46:53 -0400
Re: Bare Board Moisture Content Standard
Werner Engelmaier /*
Sat, 12 Sep 2009 12:38:12 -0400
Re: Bare Board Moisture Content Standard
Dean Stadem
Sat, 12 Sep 2009 08:43:09 -0500
Re: Bare Board Moisture Content Standard
Dean Stadem
Sat, 12 Sep 2009 08:25:35 -0500
Re: Bare Board Moisture Content Standard
David D. Hillman
Fri, 11 Sep 2009 16:15:37 -0500
Bare Board Moisture Content Standard
Chris Schaefer
Fri, 11 Sep 2009 15:51:56 -0500
New Thread BGA Pb-free, this is what I feared: Tin whiskers
Re: BGA Pb-free, this is what I feared: Tin whiskers
Dean Stadem
Fri, 4 Sep 2009 08:07:10 -0500
Re: BGA Pb-free, this is what I feared: Tin whiskers
Dennis Fritz
Thu, 3 Sep 2009 18:03:50 -0400
Re: BGA Pb-free, this is what I feared: Tin whiskers
Joyce Koo
Thu, 3 Sep 2009 16:46:07 -0400
Re: BGA Pb-free, this is what I feared: Tin whiskers
Inge
Thu, 3 Sep 2009 22:04:31 +0200
Re: BGA Pb-free, this is what I feared: Tin whiskers
Dean Stadem
Thu, 3 Sep 2009 14:55:18 -0500
Re: BGA Pb-free, this is what I feared: Tin whiskers
Inge
Thu, 3 Sep 2009 21:47:44 +0200
Re: BGA Pb-free, this is what I feared: Tin whiskers
Roberts, Jon (SA-1)
Thu, 3 Sep 2009 14:39:19 -0500
Re: BGA Pb-free, this is what I feared: Tin whiskers
Inge
Thu, 3 Sep 2009 21:37:06 +0200
Re: BGA Pb-free, this is what I feared: Tin whiskers
David D. Hillman
Thu, 3 Sep 2009 14:24:32 -0500
BGA Pb-free, this is what I feared: Tin whiskers
Inge
Thu, 3 Sep 2009 21:15:42 +0200
New Thread BGA Voids
Re: BGA Voids
Dean Stadem
Fri, 4 Sep 2009 08:08:08 -0500
Re: BGA Voids
Inge
Thu, 3 Sep 2009 22:29:08 +0200
Re: BGA Voids
Paul Edwards
Thu, 3 Sep 2009 13:15:12 -0700
Re: BGA Voids
Joyce Koo
Thu, 3 Sep 2009 13:05:51 -0400
Re: BGA Voids
Ioan Tempea
Thu, 3 Sep 2009 13:03:23 -0400
BGA Voids
Larry Dzaugis
Thu, 3 Sep 2009 11:54:14 -0500
New Thread BGA/LGA land shape versus assembly yield reliability
Re: BGA/LGA land shape versus assembly yield reliability
David Bergman
Mon, 7 Sep 2009 17:59:40 -0500
Re: BGA/LGA land shape versus assembly yield reliability
stephengregory5849
Sat, 5 Sep 2009 22:07:46 -0400
Re: BGA/LGA land shape versus assembly yield reliability
Inge
Sat, 5 Sep 2009 11:30:58 +0200
Re: BGA/LGA land shape versus assembly yield reliability
Robert Kondner
Fri, 4 Sep 2009 14:05:07 -0400
Re: BGA/LGA land shape versus assembly yield reliability
David Bergman
Fri, 4 Sep 2009 12:59:06 -0500
Re: BGA/LGA land shape versus assembly yield reliability
Inge
Fri, 4 Sep 2009 19:40:07 +0200
Re: BGA/LGA land shape versus assembly yield reliability
Joe Fjelstad
Fri, 4 Sep 2009 11:25:37 -0400
Re: BGA/LGA land shape versus assembly yield reliability
Werner Engelmaier /*
Fri, 4 Sep 2009 10:55:06 -0400
Re: BGA/LGA land shape versus assembly yield reliability
Werner Engelmaier /*
Fri, 4 Sep 2009 10:53:28 -0400
Re: BGA/LGA land shape versus assembly yield reliability
Joe Fjelstad
Fri, 4 Sep 2009 10:40:20 -0400
Re: BGA/LGA land shape versus assembly yield reliability
Eric CHRISTISON
Fri, 4 Sep 2009 15:25:25 +0100
Re: BGA/LGA land shape versus assembly yield reliability
Croslin, Robert
Fri, 4 Sep 2009 10:18:36 -0400
Re: BGA/LGA land shape versus assembly yield reliability
Werner Engelmaier /*
Fri, 4 Sep 2009 10:12:27 -0400
BGA/LGA land shape versus assembly yield reliability
Joe Fjelstad
Thu, 3 Sep 2009 21:10:55 -0400
New Thread Black Pad
Re: Black Pad
David D. Hillman
Fri, 18 Sep 2009 13:26:37 -0500
Re: Black Pad
R Sedlak
Fri, 18 Sep 2009 10:52:34 -0700
Re: Black Pad
Inge
Fri, 18 Sep 2009 19:30:54 +0200
Re: Black Pad
Paul Edwards
Fri, 18 Sep 2009 09:38:26 -0700
Re: Black Pad
R Sedlak
Fri, 18 Sep 2009 08:34:50 -0700
Re: Black Pad
Dean Stadem
Fri, 18 Sep 2009 09:12:59 -0500
Re: Black Pad
David D. Hillman
Fri, 18 Sep 2009 09:07:39 -0500
Re: Black Pad
Linda Langley
Fri, 18 Sep 2009 10:00:57 -0400
Re: Black Pad
David D. Hillman
Fri, 18 Sep 2009 08:53:33 -0500
Re: Black Pad
R Sedlak
Fri, 18 Sep 2009 06:44:20 -0700
Re: Black Pad
Vladimir Igoshev
Fri, 18 Sep 2009 12:19:47 +0000
Re: Black Pad
Linda Langley
Fri, 18 Sep 2009 07:54:10 -0400
Re: Black Pad
Werner Engelmaier /*
Fri, 18 Sep 2009 07:02:10 -0400
Re: Black Pad
Vladimir Igoshev
Fri, 18 Sep 2009 10:44:03 +0000
Black Pad
Linda Langley
Fri, 18 Sep 2009 06:12:44 -0400
New Thread Bulk Chip Component Feeders
Re: Bulk Chip Component Feeders
Stadem, Richard D.
Wed, 30 Sep 2009 09:40:53 -0500
Re: Bulk Chip Component Feeders
Steve Gregory
Wed, 30 Sep 2009 10:08:52 -0400
Re: Bulk Chip Component Feeders
Robert Kondner
Wed, 30 Sep 2009 09:48:35 -0400
Re: Bulk Chip Component Feeders
Roger Mack
Wed, 30 Sep 2009 08:44:26 -0500
Bulk Chip Component Feeders
Steve Gregory
Wed, 30 Sep 2009 09:21:03 -0400
New Thread CADMIUM RoHS RUMOR
Re: CADMIUM RoHS RUMOR
Whittaker, Dewey (EHCOE)
Tue, 8 Sep 2009 07:27:42 -0700
Re: CADMIUM RoHS RUMOR
Bev Christian
Sat, 5 Sep 2009 12:59:04 -0400
CADMIUM RoHS RUMOR
Lee Whiteman
Thu, 3 Sep 2009 16:50:16 -0400
New Thread CE expert
CE expert
Lamar Young
Wed, 30 Sep 2009 12:09:25 -0400
New Thread cleaning circuit boards
Re: cleaning circuit boards
Brian Ellis
Fri, 11 Sep 2009 19:04:05 +0300
cleaning circuit boards
Hetal Shah
Fri, 11 Sep 2009 06:36:57 -0700
New Thread Component Staking
Re: Component Staking
Ken Bloomquist
Mon, 28 Sep 2009 13:36:28 -0800
Re: Component Staking
Werner Engelmaier /*
Mon, 28 Sep 2009 17:17:35 -0400
Component Staking
Gregg Owens
Mon, 28 Sep 2009 13:58:04 -0700
New Thread CRITERIA FOR USE OF SOLDER SLEEVES
Re: CRITERIA FOR USE OF SOLDER SLEEVES
Stadem, Richard D.
Tue, 22 Sep 2009 08:23:33 -0500
Re: CRITERIA FOR USE OF SOLDER SLEEVES
Roberts, Jon (SA-1)
Tue, 22 Sep 2009 07:55:04 -0500
CRITERIA FOR USE OF SOLDER SLEEVES
Roberts, Jon (SA-1)
Mon, 21 Sep 2009 16:37:22 -0500
New Thread D2PAK-3 Component On Secondry Side
Re: D2PAK-3 Component On Secondry Side
Graham Collins
Tue, 22 Sep 2009 16:29:36 -0300
Re: D2PAK-3 Component On Secondry Side
Guy Ramsey
Tue, 22 Sep 2009 15:18:50 -0400
Re: D2PAK-3 Component On Secondry Side
Ken Bloomquist
Tue, 22 Sep 2009 11:19:39 -0800
Re: D2PAK-3 Component On Secondry Side
Ioan Tempea
Tue, 22 Sep 2009 15:02:46 -0400
Re: D2PAK-3 Component On Secondry Side
Graham Collins
Tue, 22 Sep 2009 16:00:28 -0300
D2PAK-3 Component On Secondry Side
Ken Bloomquist
Tue, 22 Sep 2009 10:50:16 -0800
New Thread Double sided reflow?
Re: Double sided reflow?
McGee, Michael
Mon, 21 Sep 2009 12:55:14 -0400
Re: Double sided reflow?
Leland Woodall
Mon, 21 Sep 2009 12:43:57 -0400
Re: Double sided reflow?
McGee, Michael
Mon, 21 Sep 2009 12:10:08 -0400
Double sided reflow?
Braddock, Iain (UK)
Mon, 21 Sep 2009 16:59:43 +0100
New Thread ENIG / HASL CO-PLANARITY
Re: ENIG / HASL CO-PLANARITY
Robert Kondner
Wed, 30 Sep 2009 18:49:15 -0400
Re: ENIG / HASL CO-PLANARITY
Dennis Fritz
Wed, 30 Sep 2009 18:41:01 -0400
Re: ENIG / HASL CO-PLANARITY
Robert Kondner
Wed, 30 Sep 2009 18:36:50 -0400
Re: ENIG / HASL CO-PLANARITY
David D. Hillman
Wed, 30 Sep 2009 17:17:16 -0500
Re: ENIG / HASL CO-PLANARITY
Robert Kondner
Wed, 30 Sep 2009 17:50:29 -0400
Re: ENIG / HASL CO-PLANARITY
Stadem, Richard D.
Wed, 30 Sep 2009 15:48:07 -0500
Re: ENIG / HASL CO-PLANARITY
David D. Hillman
Wed, 30 Sep 2009 15:29:18 -0500
Re: ENIG / HASL CO-PLANARITY
Robert Kondner
Wed, 30 Sep 2009 16:10:20 -0400
Re: ENIG / HASL CO-PLANARITY
Paul Edwards
Wed, 30 Sep 2009 10:27:32 -0700
Re: ENIG / HASL CO-PLANARITY
David D. Hillman
Wed, 30 Sep 2009 09:54:03 -0500
Re: ENIG / HASL CO-PLANARITY
Guy Ramsey
Fri, 25 Sep 2009 11:40:44 -0400
Re: ENIG / HASL CO-PLANARITY
Robert Kondner
Fri, 25 Sep 2009 11:27:41 -0400
Re: ENIG / HASL CO-PLANARITY
Werner Engelmaier /*
Fri, 25 Sep 2009 11:09:59 -0400
Re: ENIG / HASL CO-PLANARITY
Whittaker, Dewey (EHCOE)
Fri, 25 Sep 2009 08:05:28 -0700
Re: ENIG / HASL CO-PLANARITY
Lee Whiteman
Fri, 25 Sep 2009 10:51:50 -0400
Re: ENIG / HASL CO-PLANARITY
Robert Kondner
Fri, 25 Sep 2009 10:47:46 -0400
ENIG / HASL CO-PLANARITY
Lee Whiteman
Fri, 25 Sep 2009 10:09:58 -0400
New Thread fractured SJs due to soldermask compression
Re: fractured SJs due to soldermask compression
Bob Willis
Fri, 18 Sep 2009 13:22:10 +0100
Re: fractured SJs due to soldermask compression
Stadem, Richard D.
Thu, 17 Sep 2009 15:39:09 -0500
Re: fractured SJs due to soldermask compression
Ken Bloomquist
Thu, 17 Sep 2009 12:39:41 -0800
Re: fractured SJs due to soldermask compression
Whittaker, Dewey (EHCOE)
Thu, 17 Sep 2009 13:19:08 -0700
Re: fractured SJs due to soldermask compression
Inge
Thu, 17 Sep 2009 22:11:10 +0200
Re: fractured SJs due to soldermask compression
Whittaker, Dewey (EHCOE)
Thu, 17 Sep 2009 13:04:59 -0700
Re: fractured SJs due to soldermask compression
Vladimir Igoshev
Thu, 17 Sep 2009 20:05:06 +0000
Re: fractured SJs due to soldermask compression
Whittaker, Dewey (EHCOE)
Thu, 17 Sep 2009 13:02:15 -0700
Re: fractured SJs due to soldermask compression
Inge
Thu, 17 Sep 2009 21:57:03 +0200
Re: fractured SJs due to soldermask compression
Inge
Thu, 17 Sep 2009 21:43:22 +0200
Re: fractured SJs due to soldermask compression
Stadem, Richard D.
Thu, 17 Sep 2009 14:29:17 -0500
Re: fractured SJs due to soldermask compression
Chris Ball
Thu, 17 Sep 2009 15:19:57 -0400
Re: fractured SJs due to soldermask compression
Stadem, Richard D.
Thu, 17 Sep 2009 14:05:35 -0500
Re: fractured SJs due to soldermask compression
Werner Engelmaier /*
Thu, 17 Sep 2009 14:59:59 -0400
Re: fractured SJs due to soldermask compression
Chris Ball
Thu, 17 Sep 2009 14:53:52 -0400
Re: fractured SJs due to soldermask compression
Werner Engelmaier /*
Thu, 17 Sep 2009 14:48:31 -0400
Re: fractured SJs due to soldermask compression
Stadem, Richard D.
Thu, 17 Sep 2009 13:36:32 -0500
Re: fractured SJs due to soldermask compression
Werner Engelmaier /*
Thu, 17 Sep 2009 14:22:06 -0400
Re: fractured SJs due to soldermask compression
Vladimir Igoshev
Thu, 17 Sep 2009 17:56:01 +0000
Re: fractured SJs due to soldermask compression
Stadem, Richard D.
Thu, 17 Sep 2009 12:49:22 -0500
Re: fractured SJs due to soldermask compression
Werner Engelmaier /*
Thu, 17 Sep 2009 13:32:24 -0400
fractured SJs due to soldermask compression
Chris Ball
Thu, 17 Sep 2009 13:07:42 -0400
New Thread fractured SJs due to soldermask compression OR soldermask-defined BGA pad problems
Re: fractured SJs due to soldermask compression OR soldermask-defined BGA pad problems
Stadem, Richard D.
Thu, 17 Sep 2009 13:36:50 -0500
Re: fractured SJs due to soldermask compression OR soldermask-defined BGA pad problems
Paul Edwards
Thu, 17 Sep 2009 11:15:31 -0700
New Thread Gel-Flex for MPM
Re: Gel-Flex for MPM
Iven, Jowan
Tue, 1 Sep 2009 09:11:20 +0200
New Thread Germicides and Electronics...deadly mix?
Re: Germicides and Electronics...deadly mix?
Whittaker, Dewey (EHCOE)
Tue, 1 Sep 2009 09:03:52 -0700
Re: Germicides and Electronics...deadly mix?
Brian Ellis
Tue, 1 Sep 2009 16:14:57 +0300
Re: Germicides and Electronics...deadly mix?
Randall L Bock
Tue, 1 Sep 2009 08:47:38 -0400
Re: Germicides and Electronics...deadly mix?
Douglas Pauls
Tue, 1 Sep 2009 07:31:42 -0500
Re: Germicides and Electronics...deadly mix?
Graham Collins
Tue, 1 Sep 2009 09:18:08 -0300
Re: Germicides and Electronics...deadly mix?
Joyce Koo
Tue, 1 Sep 2009 08:27:15 -0400
Re: Germicides and Electronics...deadly mix?
Douglas Pauls
Tue, 1 Sep 2009 07:05:58 -0500
New Thread Ground Pour Under BGA
Re: Ground Pour Under BGA
Kenneth Wood
Fri, 18 Sep 2009 08:04:19 -0400
Re: Ground Pour Under BGA
John Burke
Thu, 17 Sep 2009 17:15:04 -0700
Re: Ground Pour Under BGA
John Burke
Thu, 17 Sep 2009 09:04:48 -0700
Re: Ground Pour Under BGA
Dwight Mattix
Thu, 17 Sep 2009 08:42:10 -0700
Re: Ground Pour Under BGA
Stadem, Richard D.
Thu, 17 Sep 2009 10:33:55 -0500
Re: Ground Pour Under BGA
Pete Houwen
Thu, 17 Sep 2009 10:06:59 -0500
Re: Ground Pour Under BGA
Dave Schaefer
Thu, 17 Sep 2009 08:53:55 -0500
Re: Ground Pour Under BGA
Robert Kondner
Thu, 17 Sep 2009 09:58:20 -0400
Re: Ground Pour Under BGA
Dwight Mattix
Thu, 17 Sep 2009 06:39:16 -0700
Re: Ground Pour Under BGA
Tontis, Theodore
Thu, 17 Sep 2009 09:39:23 -0400
Re: Ground Pour Under BGA
Hernefjord Ingemar
Thu, 17 Sep 2009 15:25:17 +0200
Re: Ground Pour Under BGA
Eric CHRISTISON
Thu, 17 Sep 2009 13:11:25 +0100
Re: Ground Pour Under BGA
Joyce Koo
Thu, 17 Sep 2009 08:10:39 -0400
Re: Ground Pour Under BGA
Terry Kozlyk
Thu, 17 Sep 2009 06:03:41 -0600
Re: Ground Pour Under BGA
Hernefjord Ingemar
Thu, 17 Sep 2009 10:33:08 +0200
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 16:55:05 -0400
Re: Ground Pour Under BGA
Kenneth Wood
Wed, 16 Sep 2009 16:41:45 -0400
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 16:35:09 -0400
Re: Ground Pour Under BGA
Kenneth Wood
Wed, 16 Sep 2009 16:20:46 -0400
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 14:15:52 -0400
Re: Ground Pour Under BGA
Toby Carrier
Wed, 16 Sep 2009 13:54:19 -0400
Re: Ground Pour Under BGA
Dwight Mattix
Wed, 16 Sep 2009 08:56:24 -0700
Re: Ground Pour Under BGA
Dwight Mattix
Wed, 16 Sep 2009 08:51:58 -0700
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 11:39:08 -0400
Re: Ground Pour Under BGA
Dwight Mattix
Wed, 16 Sep 2009 08:26:58 -0700
Re: Ground Pour Under BGA
Dwight Mattix
Wed, 16 Sep 2009 08:25:56 -0700
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 11:23:32 -0400
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 11:19:36 -0400
Re: Ground Pour Under BGA
Lee Hill
Wed, 16 Sep 2009 10:36:28 -0400
Re: Ground Pour Under BGA
Kenneth Wood
Wed, 16 Sep 2009 10:34:19 -0400
Re: Ground Pour Under BGA
Kenneth Wood
Wed, 16 Sep 2009 10:31:33 -0400
Re: Ground Pour Under BGA
Kenneth Wood
Wed, 16 Sep 2009 10:26:49 -0400
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 10:23:18 -0400
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 10:21:05 -0400
Re: Ground Pour Under BGA
Kenneth Wood
Wed, 16 Sep 2009 10:16:49 -0400
Re: Ground Pour Under BGA
Lee Hill
Wed, 16 Sep 2009 10:09:48 -0400
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 10:06:45 -0400
Re: Ground Pour Under BGA
Kenneth Wood
Wed, 16 Sep 2009 09:54:00 -0400
Re: Ground Pour Under BGA
Robert Kondner
Wed, 16 Sep 2009 08:42:26 -0400
Re: Ground Pour Under BGA
Guy Ramsey
Wed, 16 Sep 2009 07:42:44 -0400
Ground Pour Under BGA
Toby Carrier
Tue, 15 Sep 2009 19:45:01 -0500
New Thread Hakko FR-802
Re: Hakko FR-802
Dean Stadem
Thu, 3 Sep 2009 14:53:14 -0500
Re: Hakko FR-802
David D. Hillman
Thu, 3 Sep 2009 13:57:13 -0500
Re: Hakko FR-802
stephen gregory
Thu, 3 Sep 2009 10:35:00 -0700
Re: Hakko FR-802
Stadem, Richard D.
Thu, 3 Sep 2009 12:32:10 -0500
Hakko FR-802
Ioan Tempea
Thu, 3 Sep 2009 13:11:04 -0400
New Thread High Speed Rigid-Flex PCB Design
Re: High Speed Rigid-Flex PCB Design
S.Huetter
Fri, 11 Sep 2009 09:53:33 +0200
High Speed Rigid-Flex PCB Design
Charming Chan
Thu, 10 Sep 2009 11:13:22 -0400
New Thread How to search in IPC archive
How to search in IPC archive
Inge
Wed, 2 Sep 2009 17:43:29 +0200
New Thread Hydrobromic Acid containing flux
Re: Hydrobromic Acid containing flux
Bev Christian
Sun, 20 Sep 2009 12:19:55 -0400
Re: Hydrobromic Acid containing flux
Inge
Sun, 20 Sep 2009 17:28:30 +0200
Re: Hydrobromic Acid containing flux
R Sedlak
Sat, 19 Sep 2009 10:09:14 -0700
Re: Hydrobromic Acid containing flux
Brian Ellis
Sat, 19 Sep 2009 11:45:15 +0300
Re: Hydrobromic Acid containing flux
Ken Bloomquist
Fri, 18 Sep 2009 14:52:11 -0800
Re: Hydrobromic Acid containing flux
Steven Creswick
Fri, 18 Sep 2009 18:21:08 -0400
Re: Hydrobromic Acid containing flux
Steven Creswick
Fri, 18 Sep 2009 18:19:46 -0400
Re: Hydrobromic Acid containing flux
R Sedlak
Fri, 18 Sep 2009 14:55:05 -0700
Re: Hydrobromic Acid containing flux
R Sedlak
Fri, 18 Sep 2009 13:36:00 -0700
Re: Hydrobromic Acid containing flux
Ted Stern
Fri, 18 Sep 2009 15:38:53 -0500
Re: Hydrobromic Acid containing flux
Karen Tellefsen
Fri, 18 Sep 2009 16:15:24 -0400
Re: Hydrobromic Acid containing flux
John Burke
Fri, 18 Sep 2009 13:12:42 -0700
Re: Hydrobromic Acid containing flux
Ken Bloomquist
Fri, 18 Sep 2009 11:47:48 -0800
Re: Hydrobromic Acid containing flux
R Sedlak
Fri, 18 Sep 2009 11:52:29 -0700
Re: Hydrobromic Acid containing flux
Karen Tellefsen
Fri, 18 Sep 2009 14:08:32 -0400
Hydrobromic Acid containing flux
R Sedlak
Fri, 18 Sep 2009 10:50:24 -0700
New Thread IAg PCBs. Re-plating?
Re: IAg PCBs. Re-plating?
Whittaker, Dewey (EHCOE)
Fri, 25 Sep 2009 10:22:47 -0700
Re: IAg PCBs. Re-plating?
Glidden, Kevin
Fri, 25 Sep 2009 13:14:56 -0400
Re: IAg PCBs. Re-plating?
Juan T. Marugán
Fri, 25 Sep 2009 11:56:47 -0500
Re: IAg PCBs. Re-plating?
R Sedlak
Fri, 25 Sep 2009 09:58:19 -0700
Re: IAg PCBs. Re-plating?
Juan T. Marugán
Fri, 25 Sep 2009 11:47:10 -0500
Re: IAg PCBs. Re-plating?
Lee parker
Thu, 24 Sep 2009 10:33:21 -0400
Re: IAg PCBs. Re-plating?
R Sedlak
Wed, 23 Sep 2009 10:25:18 -0700
Re: IAg PCBs. Re-plating?
Wenger, George M.
Wed, 23 Sep 2009 12:24:54 -0400
IAg PCBs. Re-plating?
Juan T. Marugán
Wed, 23 Sep 2009 11:06:12 -0500
New Thread Identities
Re: Identities
Inge
Fri, 4 Sep 2009 19:31:30 +0200
Re: Identities
Chris Ball
Fri, 4 Sep 2009 12:55:47 -0400
Re: Identities
Douglas Pauls
Fri, 4 Sep 2009 11:26:34 -0500
Re: Identities
Dean Stadem
Fri, 4 Sep 2009 09:12:16 -0500
New Thread Imm Sn soldering issue.
Re: Imm Sn soldering issue.
Guy Ramsey
Wed, 23 Sep 2009 08:33:04 -0400
Re: Imm Sn soldering issue.
Peter Barton
Wed, 23 Sep 2009 10:28:00 +0100
Re: Imm Sn soldering issue.
Peter Barton
Wed, 23 Sep 2009 08:50:00 +0100
Re: Imm Sn soldering issue.
Tan Geok Ang
Wed, 23 Sep 2009 09:36:41 +0800
Re: Imm Sn soldering issue.
Lee parker
Tue, 22 Sep 2009 16:39:12 -0400
Re: Imm Sn soldering issue.
Wenger, George M.
Tue, 22 Sep 2009 16:31:41 -0400
Re: Imm Sn soldering issue.
Lee parker
Tue, 22 Sep 2009 16:24:41 -0400
Re: Imm Sn soldering issue.
Wenger, George M.
Tue, 22 Sep 2009 15:21:18 -0400
Re: Imm Sn soldering issue.
Lee parker
Tue, 22 Sep 2009 15:02:32 -0400
Re: Imm Sn soldering issue.
John Burke
Tue, 22 Sep 2009 10:14:24 -0700
Imm Sn soldering issue.
Peter Barton
Tue, 22 Sep 2009 17:33:00 +0100
New Thread Immersion Silver for Class 3 Boards
Re: Immersion Silver for Class 3 Boards
Werner Engelmaier /*
Wed, 30 Sep 2009 14:19:28 -0400
Re: Immersion Silver for Class 3 Boards
Wenger, George M.
Wed, 30 Sep 2009 12:20:00 -0500
Re: Immersion Silver for Class 3 Boards
Stadem, Richard D.
Wed, 30 Sep 2009 11:57:39 -0500
Re: Immersion Silver for Class 3 Boards
Ian Hanna
Wed, 30 Sep 2009 12:46:46 -0400
Re: Immersion Silver for Class 3 Boards
Glidden, Kevin
Wed, 30 Sep 2009 12:17:57 -0400
Re: Immersion Silver for Class 3 Boards
Bev Christian
Wed, 30 Sep 2009 12:04:34 -0400
Re: Immersion Silver for Class 3 Boards
Ioan Tempea
Wed, 30 Sep 2009 12:02:56 -0400
Re: Immersion Silver for Class 3 Boards
Stadem, Richard D.
Wed, 30 Sep 2009 10:49:09 -0500
Re: Immersion Silver for Class 3 Boards
Stadem, Richard D.
Wed, 30 Sep 2009 10:43:24 -0500
Re: Immersion Silver for Class 3 Boards
Joyce Koo
Wed, 30 Sep 2009 11:43:47 -0400
Re: Immersion Silver for Class 3 Boards
Glidden, Kevin
Wed, 30 Sep 2009 11:32:13 -0400
Re: Immersion Silver for Class 3 Boards
Wenger, George M.
Wed, 30 Sep 2009 10:31:22 -0500
Re: Immersion Silver for Class 3 Boards
Bev Christian
Wed, 30 Sep 2009 11:29:04 -0400
Re: Immersion Silver for Class 3 Boards
Glidden, Kevin
Wed, 30 Sep 2009 11:28:32 -0400
Re: Immersion Silver for Class 3 Boards
Thayer, Wayne - IIW
Wed, 30 Sep 2009 11:21:45 -0400
Immersion Silver for Class 3 Boards
Harner, Chester
Wed, 30 Sep 2009 08:03:17 -0700
New Thread IPC-610 vs lab results
Re: IPC-610 vs lab results
Werner Engelmaier /*
Thu, 17 Sep 2009 13:22:18 -0400
Re: IPC-610 vs lab results
John Burke
Thu, 17 Sep 2009 09:06:26 -0700
Re: IPC-610 vs lab results
Leland Woodall
Thu, 17 Sep 2009 11:21:59 -0400
IPC-610 vs lab results
Ioan Tempea
Thu, 17 Sep 2009 10:44:57 -0400
New Thread Is firewall/spam filter blocking forum mails?
Re: Is firewall/spam filter blocking forum mails?
Inge
Fri, 25 Sep 2009 17:10:10 +0200
Is firewall/spam filter blocking forum mails?
Mike Fenner
Fri, 25 Sep 2009 13:46:32 +0100
New Thread Is Steve still helping with uploading pictures?
Re: Is Steve still helping with uploading pictures?
stephen gregory
Thu, 3 Sep 2009 11:08:56 -0700
Is Steve still helping with uploading pictures?
Jim West
Thu, 3 Sep 2009 13:28:01 -0400
New Thread Job security for REACH
Job security for REACH
Joe Fjelstad
Wed, 9 Sep 2009 15:36:42 -0400
New Thread Knock, knock, knock on the heaven's door
Re: Knock, knock, knock on the heaven's door
Hernefjord Ingemar
Fri, 25 Sep 2009 09:02:32 +0200
Re: Knock, knock, knock on the heaven's door
Juan T. Marugán
Thu, 24 Sep 2009 16:14:18 -0500
Re: Knock, knock, knock on the heaven's door
Inge
Wed, 23 Sep 2009 21:26:18 +0200
Re: Knock, knock, knock on the heaven's door
Inge
Wed, 23 Sep 2009 21:19:24 +0200
Re: Knock, knock, knock on the heaven's door
Dwight Mattix
Wed, 23 Sep 2009 11:22:35 -0700
Re: Knock, knock, knock on the heaven's door
Randall L Bock
Wed, 23 Sep 2009 13:11:09 -0400
Re: Knock, knock, knock on the heaven's door
Jerry Dengler
Wed, 23 Sep 2009 13:06:07 -0400
Re: Knock, knock, knock on the heaven's door
Dwight Mattix
Wed, 23 Sep 2009 10:00:05 -0700
Re: Knock, knock, knock on the heaven's door
Dwight Mattix
Wed, 23 Sep 2009 09:08:24 -0700
Re: Knock, knock, knock on the heaven's door
Inge
Wed, 23 Sep 2009 17:58:51 +0200
Re: Knock, knock, knock on the heaven's door
Randall L Bock
Wed, 23 Sep 2009 11:33:30 -0400
Re: Knock, knock, knock on the heaven's door
Dwight Mattix
Wed, 23 Sep 2009 08:28:08 -0700
Re: Knock, knock, knock on the heaven's door
Hernefjord Ingemar
Wed, 23 Sep 2009 14:50:19 +0200
Re: Knock, knock, knock on the heaven's door
Stadem, Richard D.
Wed, 23 Sep 2009 07:20:44 -0500
Re: Knock, knock, knock on the heaven's door
Jerry Dengler
Wed, 23 Sep 2009 07:46:48 -0400
Re: Knock, knock, knock on the heaven's door
Hernefjord Ingemar
Wed, 23 Sep 2009 11:59:03 +0200
Re: Knock, knock, knock on the heaven's door
Werner Engelmaier /*
Tue, 22 Sep 2009 19:01:34 -0400
Re: Knock, knock, knock on the heaven's door
Inge
Tue, 22 Sep 2009 23:12:01 +0200
Re: Knock, knock, knock on the heaven's door
Thayer, Wayne - IIW
Tue, 22 Sep 2009 16:57:50 -0400
Re: Knock, knock, knock on the heaven's door
Inge
Tue, 22 Sep 2009 22:15:03 +0200
Re: Knock, knock, knock on the heaven's door
<>
Tue, 22 Sep 2009 16:00:15 -0400
Knock, knock, knock on the heaven's door
Inge
Tue, 22 Sep 2009 21:33:44 +0200
New Thread Lacing Tape, wax impregnated or not
Re: Lacing Tape, wax impregnated or not
Mike Sewell
Fri, 11 Sep 2009 11:07:15 -0500
Re: Lacing Tape, wax impregnated or not
Ken Bloomquist
Fri, 11 Sep 2009 07:15:57 -0800
Lacing Tape, wax impregnated or not
Joe Macko
Fri, 11 Sep 2009 08:21:23 -0700
New Thread Looking for Data Sheet on ADC-914
Looking for Data Sheet on ADC-914
Neil Diamond
Wed, 30 Sep 2009 11:06:46 -0500
New Thread Making a stencil from OBD++ Files
Re: Making a stencil from OBD++ Files
Ahne Oosterhof
Wed, 16 Sep 2009 17:50:27 -0700
Re: Making a stencil from OBD++ Files
Robert Kondner
Tue, 8 Sep 2009 13:50:09 -0400
Re: Making a stencil from OBD++ Files
Nowland, Russell Howard (Russell)
Tue, 8 Sep 2009 12:27:58 -0500
Re: Making a stencil from OBD++ Files
Frank Kimmey
Mon, 7 Sep 2009 21:48:10 -0700
Re: Making a stencil from OBD++ Files
Dave Elder
Tue, 8 Sep 2009 13:43:06 +1200
Re: Making a stencil from OBD++ Files
stephengregory5849
Mon, 7 Sep 2009 21:41:38 -0400
Making a stencil from OBD++ Files
stephengregory5849
Mon, 7 Sep 2009 21:35:03 -0400
New Thread Mil-Std-130 vs Mil-Std-1285 (marking specifications)
Re: Mil-Std-130 vs Mil-Std-1285 (marking specifications)
Dave Dixon
Thu, 17 Sep 2009 15:46:13 -0500
Re: Mil-Std-130 vs Mil-Std-1285 (marking specifications)
Glidden, Kevin
Thu, 17 Sep 2009 16:45:40 -0400
Mil-Std-130 vs Mil-Std-1285 (marking specifications)
Alan Kreplick
Thu, 17 Sep 2009 16:33:31 -0400
New Thread Mixed Flowing Gas Chambers
Mixed Flowing Gas Chambers
Bev Christian
Wed, 9 Sep 2009 11:40:24 -0400
New Thread MRP systems
Re: MRP systems
Dave Schaefer
Wed, 30 Sep 2009 11:22:02 -0500
Re: MRP systems
Stadem, Richard D.
Wed, 30 Sep 2009 10:01:32 -0500
Re: MRP systems
Guy Ramsey
Wed, 30 Sep 2009 10:59:14 -0400
Re: MRP systems
Wolfe, Robert
Wed, 30 Sep 2009 10:05:18 -0400
Re: MRP systems
Grant Emandien
Wed, 30 Sep 2009 15:53:08 +0200
Re: MRP systems
Robert Kondner
Wed, 30 Sep 2009 09:30:19 -0400
Re: MRP systems
Pete Houwen
Wed, 30 Sep 2009 08:14:16 -0500
Re: MRP systems
Guy Ramsey
Tue, 29 Sep 2009 22:45:36 -0400
Re: MRP systems
Roger Stoops
Tue, 29 Sep 2009 22:23:53 -0400
Re: MRP systems
Paul Edwards
Tue, 29 Sep 2009 18:29:31 -0700
Re: MRP systems
John Burke
Tue, 29 Sep 2009 16:48:57 -0700
Re: MRP systems
Robert Kondner
Tue, 29 Sep 2009 19:06:37 -0400
Re: MRP systems
John Burke
Tue, 29 Sep 2009 16:00:01 -0700
Re: MRP systems
Robert Kondner
Tue, 29 Sep 2009 18:20:15 -0400
MRP systems
Barbara Burcham
Tue, 29 Sep 2009 17:04:06 -0500
New Thread N1H1 flu/germs/cleaning ESD mats
Re: N1H1 flu/germs/cleaning ESD mats
Brian Ellis
Sat, 19 Sep 2009 11:57:00 +0300
N1H1 flu/germs/cleaning ESD mats
J W
Fri, 18 Sep 2009 11:26:42 -0400
New Thread Need clever comments
Re: Need clever comments
Inge
Fri, 11 Sep 2009 22:24:50 +0200
Re: Need clever comments
Paul Edwards
Fri, 11 Sep 2009 12:53:05 -0700
Re: Need clever comments
Inge
Fri, 11 Sep 2009 21:15:27 +0200
Re: Need clever comments
John Burke
Fri, 11 Sep 2009 08:15:27 -0700
Re: Need clever comments
S.Huetter
Fri, 11 Sep 2009 11:56:10 +0200
Re: Need clever comments
Hernefjord Ingemar
Fri, 11 Sep 2009 11:03:03 +0200
Re: Need clever comments
S.Huetter
Fri, 11 Sep 2009 10:23:01 +0200
Re: Need clever comments
Hernefjord Ingemar
Fri, 11 Sep 2009 09:08:10 +0200
Re: Need clever comments
Hernefjord Ingemar
Fri, 11 Sep 2009 08:56:03 +0200
Re: Need clever comments
Dennis Fritz
Thu, 10 Sep 2009 21:10:58 -0400
Re: Need clever comments
Paul Edwards
Thu, 10 Sep 2009 17:47:10 -0700
Re: Need clever comments
stephengregory5849
Thu, 10 Sep 2009 19:05:51 -0400
Re: Need clever comments
Dwight Mattix
Thu, 10 Sep 2009 14:47:18 -0700
Re: Need clever comments
Lenny Carter
Thu, 10 Sep 2009 17:32:34 -0400
Re: Need clever comments
Stadem, Richard D.
Thu, 10 Sep 2009 16:16:07 -0500
Re: Need clever comments
Chris Ball
Thu, 10 Sep 2009 16:39:31 -0400
Re: Need clever comments
Inge
Thu, 10 Sep 2009 22:26:14 +0200
Re: Need clever comments
Inge
Thu, 10 Sep 2009 22:10:38 +0200
Re: Need clever comments
Stadem, Richard D.
Thu, 10 Sep 2009 14:46:45 -0500
Re: Need clever comments
Whittaker, Dewey (EHCOE)
Thu, 10 Sep 2009 12:46:45 -0700
Re: Need clever comments
Inge
Thu, 10 Sep 2009 21:43:27 +0200
Re: Need clever comments
Inge
Thu, 10 Sep 2009 21:41:08 +0200
Re: Need clever comments
Jerry Dengler
Thu, 10 Sep 2009 15:22:30 -0400
Re: Need clever comments
Inge
Thu, 10 Sep 2009 21:21:17 +0200
Re: Need clever comments
Dwight Mattix
Thu, 10 Sep 2009 12:19:14 -0700
Re: Need clever comments
Dwight Mattix
Thu, 10 Sep 2009 11:52:12 -0700
Re: Need clever comments
Inge
Thu, 10 Sep 2009 20:41:48 +0200
Re: Need clever comments
Whittaker, Dewey (EHCOE)
Thu, 10 Sep 2009 11:41:42 -0700
Re: Need clever comments
Whittaker, Dewey (EHCOE)
Thu, 10 Sep 2009 11:39:20 -0700
Re: Need clever comments
Inge
Thu, 10 Sep 2009 20:31:36 +0200
Re: Need clever comments
Dwight Mattix
Thu, 10 Sep 2009 11:06:37 -0700
Re: Need clever comments
John Maxwell
Thu, 10 Sep 2009 10:58:45 -0700
Re: Need clever comments
Stadem, Richard D.
Thu, 10 Sep 2009 12:45:29 -0500
Re: Need clever comments
Randall L Bock
Thu, 10 Sep 2009 13:26:56 -0400
Re: Need clever comments
Stadem, Richard D.
Thu, 10 Sep 2009 11:59:14 -0500
Re: Need clever comments
Inge
Thu, 10 Sep 2009 18:24:48 +0200
Re: Need clever comments
Inge
Thu, 10 Sep 2009 18:07:13 +0200
Re: Need clever comments
Dwight Mattix
Thu, 10 Sep 2009 09:03:48 -0700
Re: Need clever comments
Steven Creswick
Thu, 10 Sep 2009 11:48:33 -0400
Re: Need clever comments
Joyce Koo
Thu, 10 Sep 2009 11:48:11 -0400
Re: Need clever comments
Inge
Thu, 10 Sep 2009 17:40:09 +0200
Re: Need clever comments
Paul Edwards
Thu, 10 Sep 2009 08:26:17 -0700
Re: Need clever comments
Steven Creswick
Thu, 10 Sep 2009 11:21:20 -0400
Re: Need clever comments
Inge
Thu, 10 Sep 2009 17:10:46 +0200
Re: Need clever comments
Inge
Wed, 9 Sep 2009 20:20:10 +0200
Re: Need clever comments
Inge
Wed, 9 Sep 2009 20:17:42 +0200
Re: Need clever comments
Inge
Wed, 9 Sep 2009 20:09:21 +0200
Re: Need clever comments
Paul Edwards
Wed, 9 Sep 2009 09:58:13 -0700
Re: Need clever comments
Chuck Brummer
Wed, 9 Sep 2009 08:20:46 -0700
Need clever comments
Jack Olson
Wed, 9 Sep 2009 09:44:57 -0500
Re: Need clever comments
Joyce Koo
Wed, 9 Sep 2009 09:15:13 -0400
Re: Need clever comments
Hernefjord Ingemar
Wed, 9 Sep 2009 13:59:59 +0200
Re: Need clever comments
Brian Ellis
Wed, 9 Sep 2009 14:31:09 +0300
Re: Need clever comments
Hernefjord Ingemar
Wed, 9 Sep 2009 09:19:36 +0200
Re: Need clever comments
Thayer, Wayne - IIW
Tue, 8 Sep 2009 12:11:38 -0400
Re: Need clever comments
Inge
Tue, 8 Sep 2009 17:38:58 +0200
Re: Need clever comments
Inge
Tue, 8 Sep 2009 17:34:03 +0200
Re: Need clever comments
Whittaker, Dewey (EHCOE)
Tue, 8 Sep 2009 08:06:29 -0700
Re: Need clever comments
David D. Hillman
Tue, 8 Sep 2009 08:33:25 -0500
Re: Need clever comments
Wenger, George M.
Mon, 7 Sep 2009 18:37:17 -0400
Re: Need clever comments
Bev Christian
Mon, 7 Sep 2009 17:09:24 -0400
Re: Need clever comments
Inge
Mon, 7 Sep 2009 22:15:24 +0200
Re: Need clever comments
Bev Christian
Mon, 7 Sep 2009 15:47:56 -0400
Re: Need clever comments
Bev Christian
Mon, 7 Sep 2009 15:46:52 -0400
Re: Need clever comments
Inge
Mon, 7 Sep 2009 18:35:24 +0200
Re: Need clever comments
Wenger, George M.
Mon, 7 Sep 2009 12:09:21 -0400
Re: Need clever comments
Inge
Mon, 7 Sep 2009 17:52:52 +0200
Re: Need clever comments
Inge
Mon, 7 Sep 2009 17:27:49 +0200
Re: Need clever comments
Inge
Mon, 7 Sep 2009 17:06:03 +0200
Re: Need clever comments
Inge
Mon, 7 Sep 2009 16:53:26 +0200
Re: Need clever comments
Joyce Koo
Mon, 7 Sep 2009 10:40:59 -0400
Re: Need clever comments
stephengregory5849
Mon, 7 Sep 2009 10:31:17 -0400
Re: Need clever comments
Bev Christian
Mon, 7 Sep 2009 09:40:48 -0400
Re: Need clever comments
Bev Christian
Mon, 7 Sep 2009 09:26:58 -0400
Re: Need clever comments
Reuven Rokah
Mon, 7 Sep 2009 16:22:49 +0300
Re: Need clever comments
Bev Christian
Mon, 7 Sep 2009 09:14:09 -0400
Need clever comments
Hernefjord Ingemar
Mon, 7 Sep 2009 13:21:54 +0200
New Thread Need clever comments (NTC)
Re: Need clever comments (NTC)
Mike Sewell
Thu, 10 Sep 2009 13:06:23 -0500
New Thread Need clever comments, closed , additional
Re: Need clever comments, closed , additional
Inge
Mon, 7 Sep 2009 22:37:41 +0200
New Thread Need clever comments, closed .
Re: Need clever comments, closed .
Inge
Mon, 7 Sep 2009 18:57:59 +0200
New Thread Need clever comments- A detail
Re: Need clever comments- A detail
Inge
Mon, 7 Sep 2009 22:43:59 +0200
Re: Need clever comments- A detail
R Sedlak
Mon, 7 Sep 2009 12:49:49 -0700
New Thread New standard revisions
New standard revisions
Genny Gibbard
Wed, 30 Sep 2009 11:35:58 -0600
New Thread Non Wetting Problem
Re: Non Wetting Problem
Steve Gregory
Tue, 8 Sep 2009 11:35:33 -0400
Re: Non Wetting Problem
Leif Erik Laerum
Tue, 8 Sep 2009 09:23:20 -0500
Re: Non Wetting Problem
Joyce Koo
Tue, 8 Sep 2009 09:19:26 -0400
Re: Non Wetting Problem
Wenger, George M.
Tue, 8 Sep 2009 08:54:28 -0400
Non Wetting Problem
Leif Erik Laerum
Tue, 8 Sep 2009 07:45:13 -0500
New Thread NTC RE: [TN] Lacing Tape, wax impregnated or not
Re: NTC RE: [TN] Lacing Tape, wax impregnated or not
Whittaker, Dewey (EHCOE)
Fri, 11 Sep 2009 09:18:13 -0700
NTC RE: [TN] Lacing Tape, wax impregnated or not
Phil Nutting
Fri, 11 Sep 2009 12:03:07 -0400
New Thread NTC [TN] Hydrobromic Acid containing flux
Re: NTC [TN] Hydrobromic Acid containing flux
Bev Christian
Fri, 18 Sep 2009 14:59:55 -0400
New Thread NTC: ground Zero
Re: NTC: ground Zero
Dennis Fritz
Fri, 18 Sep 2009 13:39:28 -0400
Re: NTC: ground Zero
Robert Kondner
Fri, 18 Sep 2009 13:28:42 -0400
NTC: ground Zero
Inge
Fri, 18 Sep 2009 19:21:04 +0200
New Thread NTC: I made it to Allentown!
Re: NTC: I made it to Allentown!
Blair Hogg
Tue, 1 Sep 2009 07:58:19 -0500
New Thread Plug vias first or second.
Re: Plug vias first or second.
Dwight Mattix
Mon, 28 Sep 2009 13:11:30 -0700
Re: Plug vias first or second.
Stadem, Richard D.
Mon, 28 Sep 2009 13:55:05 -0500
Re: Plug vias first or second.
Leif Erik Laerum
Mon, 28 Sep 2009 13:28:38 -0500
Re: Plug vias first or second.
Robert Kondner
Mon, 28 Sep 2009 14:16:13 -0400
Re: Plug vias first or second.
Stadem, Richard D.
Mon, 28 Sep 2009 13:06:05 -0500
Re: Plug vias first or second.
stephen gregory
Mon, 28 Sep 2009 10:45:17 -0700
Re: Plug vias first or second.
John Parsons
Mon, 28 Sep 2009 09:26:03 -0700
Re: Plug vias first or second.
Glidden, Kevin
Mon, 28 Sep 2009 12:11:07 -0400
Plug vias first or second.
Leif Erik Laerum
Mon, 28 Sep 2009 11:03:18 -0500
New Thread PTH Cracking with NiAu and Compliant Pin
Re: PTH Cracking with NiAu and Compliant Pin
Dwight Mattix
Thu, 10 Sep 2009 09:55:19 -0700
Re: PTH Cracking with NiAu and Compliant Pin
Chris Mahanna
Thu, 10 Sep 2009 12:19:18 -0400
Re: PTH Cracking with NiAu and Compliant Pin
Dwight Mattix
Thu, 10 Sep 2009 08:58:56 -0700
Re: PTH Cracking with NiAu and Compliant Pin
David D. Hillman
Thu, 10 Sep 2009 08:52:38 -0500
PTH Cracking with NiAu and Compliant Pin
Brian Chandler
Thu, 10 Sep 2009 06:42:42 -0500
New Thread PTH problem
Re: PTH problem
Stadem, Richard D.
Wed, 9 Sep 2009 13:39:57 -0500
Re: PTH problem
Bush, Jeffrey D. (US SSA)
Wed, 9 Sep 2009 14:17:15 -0400
Re: PTH problem
Victor Hernandez
Wed, 9 Sep 2009 11:57:17 -0500
Re: PTH problem
Robert Kondner
Wed, 9 Sep 2009 12:55:26 -0400
Re: PTH problem
Victor Hernandez
Wed, 9 Sep 2009 11:43:53 -0500
Re: PTH problem
Dwight Mattix
Wed, 9 Sep 2009 09:26:43 -0700
Re: PTH problem
Ian Hanna
Wed, 9 Sep 2009 11:41:17 -0400
Re: PTH problem
Wenger, George M.
Wed, 9 Sep 2009 11:25:48 -0400
Re: PTH problem
Chris Mahanna
Wed, 9 Sep 2009 11:13:06 -0400
Re: PTH problem
Carroll, Thomas A
Wed, 9 Sep 2009 08:11:01 -0700
Re: PTH problem
James Mahoney
Wed, 9 Sep 2009 11:10:25 -0400
Re: PTH problem
Werner Engelmaier /*
Wed, 9 Sep 2009 11:08:42 -0400
Re: PTH problem
Thayer, Wayne - IIW
Wed, 9 Sep 2009 11:03:40 -0400
Re: PTH problem
Chuck Brummer
Wed, 9 Sep 2009 08:00:44 -0700
Re: PTH problem
Stadem, Richard D.
Wed, 9 Sep 2009 09:55:39 -0500
Re: PTH problem
Dan Skweres
Wed, 9 Sep 2009 10:52:14 -0400
PTH problem
J W
Wed, 9 Sep 2009 10:41:12 -0400
New Thread recommended screw tightening sequence for various patterns
Re: recommended screw tightening sequence for various patterns
ALLEN, LOA
Wed, 16 Sep 2009 10:17:51 -0700
recommended screw tightening sequence for various patterns
Joe Macko
Wed, 16 Sep 2009 10:01:48 -0700
New Thread SAC-305 IMAGE
Re: SAC-305 IMAGE
Vladimir Igoshev
Wed, 16 Sep 2009 16:07:31 +0000
SAC-305 IMAGE
Lee Whiteman
Wed, 16 Sep 2009 11:36:36 -0400
New Thread Sealing edges of thick G-10
Re: Sealing edges of thick G-10
Stadem, Richard D.
Thu, 24 Sep 2009 08:59:59 -0500
Re: Sealing edges of thick G-10
James Mahoney
Thu, 24 Sep 2009 09:47:54 -0400
Sealing edges of thick G-10
Phil Nutting
Thu, 24 Sep 2009 09:40:31 -0400
New Thread shelf life of pcbs
Re: shelf life of pcbs
Stadem, Richard D.
Tue, 8 Sep 2009 10:05:50 -0500
Re: shelf life of pcbs
Dennis Fritz
Tue, 8 Sep 2009 09:11:50 -0400
Re: shelf life of pcbs
Reuven Rokah
Tue, 8 Sep 2009 14:00:49 +0300
shelf life of pcbs
Şefika Özkal
Tue, 8 Sep 2009 08:23:40 +0300
New Thread silicone conformal coat removal
Re: silicone conformal coat removal
Chris Mahanna
Fri, 25 Sep 2009 13:23:13 -0400
Re: silicone conformal coat removal
Hetal Shah
Wed, 23 Sep 2009 12:08:07 -0700
Re: silicone conformal coat removal
Brian Ellis
Wed, 23 Sep 2009 08:11:28 +0300
Re: silicone conformal coat removal
Tan Geok Ang
Wed, 23 Sep 2009 09:29:26 +0800
Re: silicone conformal coat removal
Skillborg Fredrik
Tue, 22 Sep 2009 07:32:30 +0200
Re: silicone conformal coat removal
Stadem, Richard D.
Mon, 21 Sep 2009 16:47:10 -0500
Re: silicone conformal coat removal
Temkin, Gregg
Mon, 21 Sep 2009 14:28:47 -0700
Re: silicone conformal coat removal
Charlie Pitarys
Mon, 21 Sep 2009 15:53:28 -0500
Re: silicone conformal coat removal
Inge
Mon, 21 Sep 2009 22:15:53 +0200
Re: silicone conformal coat removal
Kenneth Wood
Mon, 21 Sep 2009 13:57:02 -0400
Re: silicone conformal coat removal
Stadem, Richard D.
Mon, 21 Sep 2009 12:49:19 -0500
Re: silicone conformal coat removal
Kenneth Wood
Mon, 21 Sep 2009 12:27:31 -0400
Re: silicone conformal coat removal
Stadem, Richard D.
Mon, 21 Sep 2009 10:57:03 -0500
Re: silicone conformal coat removal
Mike Sewell
Mon, 21 Sep 2009 10:48:32 -0500
Re: silicone conformal coat removal
Brian Ellis
Mon, 21 Sep 2009 18:48:05 +0300
Re: silicone conformal coat removal
Stadem, Richard D.
Mon, 21 Sep 2009 10:03:35 -0500
Re: silicone conformal coat removal
Charlie Pitarys
Mon, 21 Sep 2009 09:46:57 -0500
Re: silicone conformal coat removal
Stadem, Richard D.
Mon, 21 Sep 2009 09:19:13 -0500
Re: silicone conformal coat removal
Stadem, Richard D.
Mon, 21 Sep 2009 09:08:27 -0500
Re: silicone conformal coat removal
Kenneth Wood
Mon, 21 Sep 2009 09:59:03 -0400
silicone conformal coat removal
Guy Ramsey
Mon, 21 Sep 2009 09:52:24 -0400
New Thread SMART Group 25th Anniversary Event - Oct 22nd UK
SMART Group 25th Anniversary Event - Oct 22nd UK
Nigel Burtt
Thu, 10 Sep 2009 14:25:20 +0100
New Thread SN63 Shear Strength over temp
Re: SN63 Shear Strength over temp
David D. Hillman
Mon, 14 Sep 2009 17:06:36 -0500
Re: SN63 Shear Strength over temp
Bev Christian
Mon, 14 Sep 2009 08:37:20 -0400
SN63 Shear Strength over temp
Bruce Bryla
Mon, 14 Sep 2009 08:22:35 -0400
New Thread Solder Mask Question
Re: Solder Mask Question
Ahne Oosterhof
Fri, 25 Sep 2009 22:43:37 -0700
Re: Solder Mask Question
Guy Ramsey
Fri, 25 Sep 2009 08:21:56 -0400
Re: Solder Mask Question
R. Sedlak
Fri, 25 Sep 2009 03:08:05 -0700
Re: Solder Mask Question
Hernefjord Ingemar
Fri, 25 Sep 2009 09:05:32 +0200
Re: Solder Mask Question
Robert Kondner
Thu, 24 Sep 2009 17:27:53 -0400
Re: Solder Mask Question
Paul Edwards
Thu, 24 Sep 2009 14:12:19 -0700
Re: Solder Mask Question
Glidden, Kevin
Thu, 24 Sep 2009 16:50:00 -0400
Re: Solder Mask Question
Glidden, Kevin
Thu, 24 Sep 2009 16:48:23 -0400
Re: Solder Mask Question
Glidden, Kevin
Thu, 24 Sep 2009 16:41:07 -0400
Re: Solder Mask Question
Guy Ramsey
Thu, 24 Sep 2009 16:29:28 -0400
Solder Mask Question
Victor Hernandez
Thu, 24 Sep 2009 14:53:49 -0500
New Thread Soldering of coax cable on PCB
Re: Soldering of coax cable on PCB
Larry Dzaugis
Thu, 3 Sep 2009 13:31:55 -0500
Re: Soldering of coax cable on PCB
Phil Nutting
Thu, 3 Sep 2009 10:50:04 -0400
Soldering of coax cable on PCB
Ioan Tempea
Thu, 3 Sep 2009 09:45:43 -0400
New Thread Steve's Missing Wallet
Re: Steve's Missing Wallet
Eric CHRISTISON
Fri, 4 Sep 2009 14:08:09 +0100
Re: Steve's Missing Wallet
Joyce Koo
Fri, 4 Sep 2009 08:54:49 -0400
Re: Steve's Missing Wallet
Blair Hogg
Fri, 4 Sep 2009 07:47:09 -0500
New Thread TechNet Digest - 17 Sep 2009 (#2009-292)
Re: TechNet Digest - 17 Sep 2009 (#2009-292)
Richard Snogren
Thu, 17 Sep 2009 23:12:35 -0600
New Thread Teflon and SVHCs
Re: Teflon and SVHCs
Bev Christian
Sat, 5 Sep 2009 15:03:55 -0400
Re: Teflon and SVHCs
Dennis Fritz
Wed, 2 Sep 2009 20:59:31 -0400
Re: Teflon and SVHCs
Graham Naisbitt
Wed, 2 Sep 2009 22:56:14 +0100
Re: Teflon and SVHCs
Douglas Pauls
Wed, 2 Sep 2009 16:54:59 -0500
Re: Teflon and SVHCs
Douglas Pauls
Wed, 2 Sep 2009 16:50:04 -0500
Re: Teflon and SVHCs
R Sedlak
Wed, 2 Sep 2009 13:54:52 -0700
Re: Teflon and SVHCs
Lamar Young
Wed, 2 Sep 2009 16:37:58 -0400
Re: Teflon and SVHCs
Douglas Pauls
Wed, 2 Sep 2009 15:28:44 -0500
Re: Teflon and SVHCs
Mumtaz Bora
Wed, 2 Sep 2009 13:16:23 -0700
Re: Teflon and SVHCs
Whittaker, Dewey (EHCOE)
Wed, 2 Sep 2009 13:13:51 -0700
Teflon and SVHCs
Douglas Pauls
Wed, 2 Sep 2009 15:01:51 -0500
New Thread Test Post
Re: Test Post
Inge
Fri, 4 Sep 2009 16:55:06 +0200
Test Post
Steve Gregory
Fri, 4 Sep 2009 09:30:40 -0400
New Thread Testing
Re: Testing
Linda Langley
Fri, 4 Sep 2009 10:10:03 -0400
Re: Testing
Randall L Bock
Fri, 4 Sep 2009 09:48:51 -0400
Testing
Steve Gregory
Fri, 4 Sep 2009 09:35:55 -0400
New Thread Testing NTC
Re: Testing NTC
Mike Fenner
Fri, 4 Sep 2009 15:47:27 +0100
New Thread Tin Lead Plate Specification
Re: Tin Lead Plate Specification
Donald Vischulis
Fri, 4 Sep 2009 18:04:53 -0500
Re: Tin Lead Plate Specification
Carroll, Thomas A
Fri, 4 Sep 2009 06:45:26 -0700
Tin Lead Plate Specification
Paul Reid
Fri, 4 Sep 2009 09:24:38 -0400
New Thread tin redeposit???
Re: tin redeposit???
Louis Hart
Fri, 11 Sep 2009 13:39:03 -0400
Re: tin redeposit???
Chuck Brummer
Fri, 11 Sep 2009 10:36:48 -0700
Re: tin redeposit???
Chuck Brummer
Fri, 11 Sep 2009 10:33:18 -0700
Re: tin redeposit???
R Sedlak
Fri, 11 Sep 2009 10:27:52 -0700
tin redeposit???
Louis Hart
Fri, 11 Sep 2009 11:57:20 -0400
New Thread Trilayer Prototypes
Trilayer Prototypes
al shirazi
Fri, 18 Sep 2009 09:15:59 -0700
New Thread UV can't see on the board
Re: UV can't see on the board
Temkin, Gregg
Wed, 30 Sep 2009 11:05:02 -0700
Re: UV can't see on the board
Robert Kondner
Wed, 30 Sep 2009 13:46:48 -0400
UV can't see on the board
Hetal Shah
Wed, 30 Sep 2009 09:33:33 -0700
New Thread Very Interesting Link!
Re: Very Interesting Link!
Steve Gregory
Wed, 30 Sep 2009 15:12:30 -0400
Re: Very Interesting Link!
Werner Engelmaier /*
Wed, 30 Sep 2009 14:11:44 -0400
Re: Very Interesting Link!
Carroll, Thomas A
Wed, 30 Sep 2009 07:12:22 -0700
Very Interesting Link!
Steve Gregory
Wed, 30 Sep 2009 09:43:00 -0400
New Thread Voiding paper
Re: Voiding paper
Stadem, Richard D.
Tue, 8 Sep 2009 12:51:33 -0500
Re: Voiding paper
Stadem, Richard D.
Tue, 8 Sep 2009 12:45:55 -0500
Re: Voiding paper
Mike Sewell
Tue, 8 Sep 2009 12:36:21 -0500
Voiding paper
Glidden, Kevin
Tue, 8 Sep 2009 13:29:57 -0400
New Thread What through-hole components cause the most process issues?
Re: What through-hole components cause the most process issues?
Brian Ellis
Tue, 29 Sep 2009 10:07:14 +0300
Re: What through-hole components cause the most process issues?
Hernefjord Ingemar
Tue, 29 Sep 2009 08:37:20 +0200
Re: What through-hole components cause the most process issues?
Robert Kondner
Mon, 28 Sep 2009 12:14:54 -0400
Re: What through-hole components cause the most process issues?
John Burke
Mon, 28 Sep 2009 09:06:09 -0700
Re: What through-hole components cause the most process issues?
Glidden, Kevin
Mon, 28 Sep 2009 11:54:14 -0400
Re: What through-hole components cause the most process issues?
Phil Nutting
Mon, 28 Sep 2009 11:48:15 -0400
Re: What through-hole components cause the most process issues?
Ioan Tempea
Mon, 28 Sep 2009 11:35:18 -0400
What through-hole components cause the most process issues?
Karen Tellefsen
Mon, 28 Sep 2009 11:34:08 -0400
New Thread [BULK] [TN] Abroad Printed Circuit Board supplier checklist
Re: [BULK] [TN] Abroad Printed Circuit Board supplier checklist
Dwight Mattix
Wed, 23 Sep 2009 11:23:46 -0700
Re: [BULK] [TN] Abroad Printed Circuit Board supplier checklist
John DeBrita
Wed, 23 Sep 2009 10:30:06 -0700
New Thread [LF] Challenges of Lead-free Electronics - article in SMT by Laura J. Tur...
Re: [LF] Challenges of Lead-free Electronics - article in SMT by Laura J. Tur...
Joe Fjelstad
Wed, 30 Sep 2009 15:21:15 -0400
New Thread [LF] Challenges of Lead-free Electronics - article in SMT by Laura J. Turbini
FW: [LF] Challenges of Lead-free Electronics - article in SMT by Laura J. Turbini
Gerald Gagnon
Wed, 30 Sep 2009 14:45:04 -0400
New Thread [LF] electronics recycling in China
Re: [LF] electronics recycling in China
Hetal Shah
Fri, 11 Sep 2009 06:42:40 -0700
Re: [LF] electronics recycling in China
stephengregory5849
Sat, 5 Sep 2009 20:31:22 -0400
[LF] electronics recycling in China
Joe Fjelstad
Sat, 5 Sep 2009 20:07:54 -0400
[LF] electronics recycling in China
Joe Fjelstad
Sat, 5 Sep 2009 19:49:00 -0400
New Thread [LF] Lasky looks at RoHS 3 years later
Re: [LF] Lasky looks at RoHS 3 years later
Ken Bloomquist
Tue, 8 Sep 2009 14:35:43 -0800
Re: [LF] Lasky looks at RoHS 3 years later
John Burke
Tue, 8 Sep 2009 10:12:35 -0700
Re: [LF] Lasky looks at RoHS 3 years later
Stadem, Richard D.
Tue, 8 Sep 2009 09:46:09 -0500
New Thread [NTC] Eye Tooth
[NTC] Eye Tooth
Ken Bloomquist
Fri, 18 Sep 2009 06:18:49 -0800
New Thread [spam] RE: [TN] Germicides and Electronics...deadly mix?
[spam] RE: [TN] Germicides and Electronics...deadly mix?
Gary Bremer
Tue, 1 Sep 2009 11:32:36 -0700
New Thread [spam] Tooling for SMT assembly of Flexi PCB's
[spam] Tooling for SMT assembly of Flexi PCB's
Douglas McCall
Thu, 10 Sep 2009 16:35:52 +0100
New Thread [TN] BGA Pb-free, this is what I feared: Tin whiskers
Fw: Re: [TN] BGA Pb-free, this is what I feared: Tin whiskers
stephen gregory
Thu, 3 Sep 2009 13:12:14 -0700
New Thread [TN] fractured SJs due to soldermask compression
Fw: [TN] fractured SJs due to soldermask compression
Chris Ball
Thu, 17 Sep 2009 15:17:54 -0400
New Thread [TN] Need clever comments
FW: [TN] Need clever comments
Sherif Refaat
Mon, 7 Sep 2009 16:50:34 -0400
New Thread ~235 C solder recommendations
~235 C solder recommendations
Prashant Joshi
Wed, 16 Sep 2009 17:57:48 -0500

ATOM RSS1 RSS2