TECHNET Archives

September 2003

TechNet@IPC.ORG

Options: Hide Table of Contents

5Sn / 95Pb Solder Sphere (11 Messages)
<No subject> (1 Message)
Acceptability of PCA Breakaways/Mouse bites (2 Messages)
Aluminum Welding - Wrong Tungsten (4 Messages)
Anita Equipment Servicing? (1 Message)
Assembly Expert vs Circuit Cam (2 Messages)
Bare Die and Technology Roadmaps - Get Educated (1 Message)
Bare Die and Technology Roadmaps - Get Educated [NTC] (1 Message)
Bare Die and Technology Roadmaps - Get Educated???? (5 Messages)
BGA Strategy Webcast (1 Message)
BGA780 tied directly to gnd plane (1 Message)
Board edge to circuit spacing / IPC-2221 ? (8 Messages)
Building Fabs to IPC-6012 spec's... (6 Messages)
buy for now (12 Messages)
Chemical Resistant Inks (3 Messages)
Circuit Card Handling?? (3 Messages)
Class 3 Handling requirements (4 Messages)
Cleaning Tight fitting SMT Components (3 Messages)
Conductive Silver Epoxy filled-vias, inspection requirements (1 Message)
conformal coating help needed (9 Messages)
Contamination (6 Messages)
contamination-free gloves (7 Messages)
controlled impedance - characteristic vs. differential (1 Message)
controlled impedance.. (2 Messages)
Data Collection Methods (2 Messages)
Detrex AVD-212 Vapor Degreaser (1 Message)
Dual Head Pin Inserter (1 Message)
dxf to gerber.. (4 Messages)
Effects of humidity on soldering (6 Messages)
Elimination of solder balls formed thru 0.45mm vias during wave (1 Message)
ESD Hot gloves (1 Message)
ESD packaging vendor (1 Message)
Factors affecting insulation resistance (4 Messages)
FMEA Manual/Guide (4 Messages)
FMEA-Pro Software? (1 Message)
FR-4 (7 Messages)
Gaskets (4 Messages)
Getting the Lead Out with Dr. Jennie Hwang (1 Message)
Gold-tin solder (1 Message)
Goodbye! (movin-on) :) **SOME NTC** (2 Messages)
GSFC/NASA Advisory about Terrestrial Sources of X-Ray Radiation (2 Messages)
Hi-density testing (1 Message)
High heat sink board hand soldering (2 Messages)
High Temp Solder Sphere ( 5Sn / 95Pb) (2 Messages)
Hole break out (3 Messages)
I keeping my own emails back (3 Messages)
Immersion Silver (6 Messages)
In-Line AOI (1 Message)
Inner Laye Ground Shorts (1 Message)
Inner Layer Ground Shorts (8 Messages)
Ionograph (16 Messages)
Ionograph / Why "no clean"? (1 Message)
IPC 2004-2005 Technology Roadmap Kickoff Meeting (1 Message)
IPC Designers Learning Symposium in Montreal, Canada! (1 Message)
IPC Seeking Industry Experts on Tin Whiskers (4 Messages)
IPC-2221/Electrical Conductor Spacing (1 Message)
IPC-356 netlist question (3 Messages)
IPC-7095 BGA land szie approximation (UC) (1 Message)
Karen Walters/USA/Skyworks is out of the office. (1 Message)
Lambert PTH fatigue (5 Messages)
Large PCB fabrication (1 Message)
Lead Free (2 Messages)
Lead free components (5 Messages)
Lead Free PCB's (4 Messages)
Lead Free Solder (1 Message)
LED Soldering Query (15 Messages)
Liquid Mask (11 Messages)
looking for Fuji 8X2 feeders to fit a CP4-2 (2 Messages)
LTCC (4 Messages)
Materials Inert to Fungus and Fungus Nutrients (2 Messages)
measurement systems calibration (4 Messages)
measuring the thickness of cured conformal coating (6 Messages)
MIL-P-13949 GBN (2 Messages)
MIL-P-55110 (4 Messages)
Mil-P-55110 versus MIL-PRF-31032 (1 Message)
Moisture under chip capacitors (5 Messages)
More on MIL-P-13949 GBN (1 Message)
Need a specification number (2 Messages)
New forum on www.smtinfo.net (1 Message)
Notices (17 Messages)
OSP vs HASL (5 Messages)
Pace soldering irons (3 Messages)
paper (1 Message)
PCB delamination Evaluation (6 Messages)
PCB substrate identification markings (2 Messages)
pic's (15 Messages)
Pink Ring not for space application? (1 Message)
Potential Problems with Mold Compound (2 Messages)
Preheat of ceramic chip capacitors (9 Messages)
prepreg classification (3 Messages)
Probimer 77 soldermask (6 Messages)
PTI value (7 Messages)
PWB MATERIAL (1 Message)
PWB repair (2 Messages)
QFN layout designs (1 Message)
Questions on Soft gold plating. (3 Messages)
RE : [TN] PWB repair (1 Message)
RE : [TN] Scanning a document and saving it as a pdf file (1 Message)
RE : [TN] Silicone conformal coating (1 Message)
Reference book for SMT (2 Messages)
Reflow Oven SMR 400 (3 Messages)
Reliability question (10 Messages)
resend.. controlled impedance - characteristic vs. differential (1 Message)
Rework (4 Messages)
Robert Coburn/TDI_NOTES is out of the office. (1 Message)
Saponifier Concentration (11 Messages)
Saponifier Concentration II (1 Message)
Saponifier Concentration More than you ever wanted to kn ow.. (1 Message)
Saponifier Concentration More than you ever wanted to know.. (3 Messages)
Scanning a document and saving it as a pdf file (9 Messages)
Selective Edge Plating (8 Messages)
Self Align BGAs less radiation (2 Messages)
Silicone conformal coating (36 Messages)
Silkscreen in solder pad (9 Messages)
Silver Immersion right for fine pitch? (5 Messages)
Software package validation (2 Messages)
Solder Balls (13 Messages)
Solder balls under parts (2 Messages)
Solder shorts defects in the passives components at the solder side in double side board through the wave solder (2 Messages)
Solderability Testing (1 Message)
Soldering Iron Analyzers (5 Messages)
Spec question (5 Messages)
Speedboard Experience (3 Messages)
spray nozzle configuration for etching (1 Message)
Static sensitive components (3 Messages)
stencil (7 Messages)
Strange part cracking... (7 Messages)
Termination material (3 Messages)
Tolerances (7 Messages)
Training (5 Messages)
Vacuum Furnace (2 Messages)
Vibration specs (1 Message)
Vibration testing (2 Messages)
Virus SOBIG etc., was: [TN] Notices (1 Message)
warp heatsink (2 Messages)
Where is Mike Fitts? (3 Messages)
Wire Crimp Terminals Plating (Sn) (2 Messages)
Xray laminography source (1 Message)
Zinc Plating Finish (13 Messages)
Zinc Plating Finish(3) (1 Message)
[NTC] Looking under BGA (2 Messages)

Subject Sorted by Subject, Chronologically

From

Date

Dehoyos, Ramon
Wed, 17 Sep 2003 05:31:38 -0700
New Thread 5Sn / 95Pb Solder Sphere
Dave Hillman
Thu, 25 Sep 2003 17:01:47 -0500
Ryan Grant
Wed, 24 Sep 2003 17:03:32 -0600
Steve Gregory
Wed, 24 Sep 2003 18:27:22 EDT
Werner Engelmaier
Wed, 24 Sep 2003 18:11:50 EDT
Wei-Shun Wang
Wed, 24 Sep 2003 13:38:41 -0700
Marsico, James
Wed, 24 Sep 2003 16:10:29 -0400
Steve Gregory
Wed, 24 Sep 2003 15:25:00 EDT
Werner Engelmaier
Wed, 24 Sep 2003 15:01:41 EDT
Guy Ramsey
Wed, 24 Sep 2003 08:28:42 -0400
Marsico, James
Wed, 24 Sep 2003 08:17:22 -0400
Victor Hernandez
Wed, 24 Sep 2003 07:10:09 -0500
New Thread <No subject>
Maribel Espinoza-Hoover
Tue, 16 Sep 2003 15:15:56 -0500
New Thread Acceptability of PCA Breakaways/Mouse bites
Franklin D Asbell
Mon, 22 Sep 2003 11:18:16 -0500
McGlaughlin, Jeffrey A
Mon, 22 Sep 2003 11:27:17 -0400
New Thread Aluminum Welding - Wrong Tungsten
David Douthit
Fri, 26 Sep 2003 17:17:57 -0700
Virgil Lenton
Fri, 26 Sep 2003 14:08:18 -0600
Dehoyos, Ramon
Fri, 26 Sep 2003 12:44:47 -0700
Virgil Lenton
Fri, 26 Sep 2003 13:52:49 -0500
New Thread Anita Equipment Servicing?
<>
Wed, 24 Sep 2003 14:43:23 -0400
New Thread Assembly Expert vs Circuit Cam
Mark Austin
Fri, 26 Sep 2003 09:13:00 +0100
Scott Lefebvre
Thu, 25 Sep 2003 16:16:18 -0700
New Thread Bare Die and Technology Roadmaps - Get Educated
Alexandra Curtis
Wed, 3 Sep 2003 14:55:01 -0500
New Thread Bare Die and Technology Roadmaps - Get Educated [NTC]
Guy Ramsey
Thu, 4 Sep 2003 08:18:07 -0400
New Thread Bare Die and Technology Roadmaps - Get Educated????
Werner Engelmaier
Wed, 3 Sep 2003 23:07:34 EDT
Leigh-Ann Litavis
Wed, 3 Sep 2003 21:37:08 EDT
Steve Gregory
Wed, 3 Sep 2003 21:33:19 EDT
Joe Fjelstad
Wed, 3 Sep 2003 19:28:02 EDT
Rudy Sedlak
Wed, 3 Sep 2003 19:12:47 EDT
New Thread BGA Strategy Webcast
Alexandra Curtis
Thu, 25 Sep 2003 12:54:05 -0500
New Thread BGA780 tied directly to gnd plane
Kile, Judy K (MED)
Tue, 30 Sep 2003 16:10:41 -0500
New Thread Board edge to circuit spacing / IPC-2221 ?
Reuven ROKAH
Wed, 10 Sep 2003 09:10:35 +0300
Mcmaster, Michael
Tue, 9 Sep 2003 08:36:11 -0700
McGlaughlin, Jeffrey A
Tue, 9 Sep 2003 11:29:47 -0400
Whittaker, Dewey (AZ75)
Tue, 9 Sep 2003 07:45:27 -0700
Blair K. Hogg
Tue, 9 Sep 2003 11:02:40 -0400
Victor Hernandez
Tue, 9 Sep 2003 09:43:39 -0500
Guy Ramsey
Tue, 9 Sep 2003 10:39:03 -0400
Robert Coburn
Tue, 9 Sep 2003 10:20:32 -0400
New Thread Building Fabs to IPC-6012 spec's...
Quality
Tue, 16 Sep 2003 17:37:00 -0400
Steve Gregory
Mon, 15 Sep 2003 21:09:53 EDT
Steve Gregory
Mon, 15 Sep 2003 14:31:43 EDT
Mark Hargreaves
Mon, 15 Sep 2003 12:39:50 -0400
Mcmaster, Michael
Mon, 15 Sep 2003 09:26:56 -0700
Steve Gregory
Mon, 15 Sep 2003 11:11:03 EDT
New Thread buy for now
Dieselberg, Ron
Mon, 29 Sep 2003 05:59:08 -0400
Ingemar Hernefjord (KC/EMW)
Mon, 29 Sep 2003 08:42:30 +0200
Steve Gregory
Fri, 26 Sep 2003 17:36:43 EDT
Mike McMonagle
Fri, 26 Sep 2003 13:07:14 -0500
Jason W. Gregory
Fri, 26 Sep 2003 12:59:13 -0500
Mike McMonagle
Fri, 26 Sep 2003 12:51:29 -0500
Charles Caswell
Fri, 26 Sep 2003 12:10:54 -0500
Joseph H. Smith
Fri, 26 Sep 2003 09:35:53 -0700
Chris Robertson
Fri, 26 Sep 2003 11:33:03 -0500
Macko, Joe @ IEC
Fri, 26 Sep 2003 09:23:14 -0700
Steve Thomas
Fri, 26 Sep 2003 08:00:54 -0700
joyce
Fri, 26 Sep 2003 10:24:31 -0400
New Thread Chemical Resistant Inks
Charlie Pitarys
Fri, 19 Sep 2003 16:46:57 -0400
Kathy Kuhlow
Fri, 19 Sep 2003 11:14:46 -0500
Andre Leclair
Fri, 19 Sep 2003 10:48:57 -0500
New Thread Circuit Card Handling??
Morse, Carrie
Mon, 8 Sep 2003 10:56:08 -0400
Steve Gregory
Mon, 8 Sep 2003 09:20:42 EDT
Jason Wilson
Mon, 8 Sep 2003 07:45:44 -0500
New Thread Class 3 Handling requirements
Gregg Owens
Fri, 19 Sep 2003 23:48:26 -0700
d. terstegge
Fri, 19 Sep 2003 16:43:41 +0200
Franklin D Asbell
Fri, 19 Sep 2003 09:52:23 -0500
Deborah Schepis
Fri, 19 Sep 2003 09:56:13 -0400
New Thread Cleaning Tight fitting SMT Components
Brian Ellis
Mon, 29 Sep 2003 11:45:07 +0300
d. terstegge
Mon, 29 Sep 2003 10:05:57 +0200
Evans, Jack
Fri, 26 Sep 2003 14:25:30 -0600
New Thread Conductive Silver Epoxy filled-vias, inspection requirements
Franklin D Asbell
Thu, 25 Sep 2003 08:58:49 -0500
New Thread conformal coating help needed
Rodney Miller
Fri, 26 Sep 2003 09:33:09 -0500
Dehoyos, Ramon
Thu, 25 Sep 2003 12:47:21 -0700
David Douthit
Thu, 25 Sep 2003 10:19:24 -0700
Crepeau, Phil
Thu, 25 Sep 2003 09:30:26 -0700
Peter Zosimadis
Thu, 25 Sep 2003 12:13:38 -0400
Dehoyos, Ramon
Thu, 25 Sep 2003 06:06:39 -0700
Graham Naisbitt
Thu, 25 Sep 2003 11:50:47 +0100
David Douthit
Wed, 24 Sep 2003 22:26:43 -0700
Peter Z
Wed, 24 Sep 2003 20:37:31 -0500
New Thread Contamination
Dieselberg, Ron
Fri, 5 Sep 2003 06:41:46 -0400
Macko, Joe @ IEC
Thu, 4 Sep 2003 09:19:01 -0700
Brian Ellis
Thu, 4 Sep 2003 18:37:30 +0300
Joe Birli
Thu, 4 Sep 2003 11:35:54 -0400
Morse, Carrie
Thu, 4 Sep 2003 11:18:05 -0400
Joe Birli
Thu, 4 Sep 2003 11:10:35 -0400
New Thread contamination-free gloves
Marsico, James
Thu, 18 Sep 2003 07:55:40 -0400
joyce
Thu, 18 Sep 2003 07:35:33 -0400
Brian Ellis
Thu, 18 Sep 2003 09:16:37 +0300
Smith, Russell (US LA)
Wed, 17 Sep 2003 12:09:47 -0700
Dehoyos, Ramon
Wed, 17 Sep 2003 11:11:13 -0700
Donald Durett
Wed, 17 Sep 2003 14:01:51 -0400
Marsico, James
Wed, 17 Sep 2003 13:42:45 -0400
New Thread controlled impedance - characteristic vs. differential
Sergio T. Ruiz
Mon, 22 Sep 2003 12:13:20 -0700
New Thread controlled impedance..
Chezhian, Krishnan
Fri, 19 Sep 2003 13:38:49 +0800
Sergio T. Ruiz
Thu, 18 Sep 2003 09:48:00 -0700
New Thread Data Collection Methods
McCabe, Chris
Wed, 24 Sep 2003 19:39:58 -0400
Dacia Super
Tue, 23 Sep 2003 17:18:58 -0500
New Thread Detrex AVD-212 Vapor Degreaser
Mike McMonagle
Wed, 10 Sep 2003 08:13:33 -0500
New Thread Dual Head Pin Inserter
Chad Haima
Thu, 4 Sep 2003 11:51:33 -0700
New Thread dxf to gerber..
Debbie Kenney
Wed, 24 Sep 2003 16:23:58 -0700
Dave Roesler
Tue, 23 Sep 2003 10:17:06 -0500
John Parsons
Tue, 23 Sep 2003 08:12:54 -0700
Sergio T. Ruiz
Tue, 23 Sep 2003 10:55:49 -0700
New Thread Effects of humidity on soldering
Guy Ramsey
Tue, 16 Sep 2003 09:38:01 -0400
<>
Mon, 15 Sep 2003 19:16:37 EDT
Brian Ellis
Fri, 12 Sep 2003 12:01:47 +0300
Stolar, Paul W
Thu, 11 Sep 2003 15:56:44 -0500
Laroe, Mike
Thu, 11 Sep 2003 14:01:31 -0400
Howard Watson
Thu, 11 Sep 2003 11:53:21 -0600
New Thread Elimination of solder balls formed thru 0.45mm vias during wave
Grant Emandien
Fri, 5 Sep 2003 11:23:47 +0200
New Thread ESD Hot gloves
Dave Chapman
Wed, 10 Sep 2003 14:04:11 -0500
New Thread ESD packaging vendor
Dan R. Johnson
Mon, 8 Sep 2003 09:41:12 -0700
New Thread Factors affecting insulation resistance
<>
Wed, 17 Sep 2003 09:09:56 EDT
Graham Naisbitt
Wed, 17 Sep 2003 11:25:08 +0100
Daan Terstegge
Wed, 17 Sep 2003 10:06:02 +0200
Murulidhara S
Wed, 17 Sep 2003 13:13:44 +0530
New Thread FMEA Manual/Guide
Rick Thompson
Tue, 23 Sep 2003 08:47:44 -0700
Paul Signorelli
Tue, 23 Sep 2003 09:46:32 -0500
<>
Tue, 23 Sep 2003 10:44:32 -0400
Carlr Ray
Tue, 23 Sep 2003 09:40:25 -0500
New Thread FMEA-Pro Software?
Rick Thompson
Fri, 26 Sep 2003 08:03:43 -0700
New Thread FR-4
Cal Driscoll
Wed, 10 Sep 2003 14:01:00 -0400
Geoff Layhe
Wed, 10 Sep 2003 17:34:02 +0100
Jason W. Gregory
Wed, 10 Sep 2003 11:10:21 -0500
Chad Haima
Wed, 10 Sep 2003 09:09:57 -0700
Jim Geer
Wed, 10 Sep 2003 09:08:25 -0700
Jason W. Gregory
Wed, 10 Sep 2003 11:06:07 -0500
Ezequiel Cruz
Wed, 10 Sep 2003 10:37:33 -0500
New Thread Gaskets
Croslin, Robert
Wed, 3 Sep 2003 13:35:43 -0400
agregor
Wed, 3 Sep 2003 10:05:12 -0700
agregor
Wed, 3 Sep 2003 10:03:34 -0700
Angela Gregor
Wed, 3 Sep 2003 10:06:33 -0700
New Thread Getting the Lead Out with Dr. Jennie Hwang
Alexandra Curtis
Tue, 23 Sep 2003 15:09:52 -0500
New Thread Gold-tin solder
Phillip Hinton
Thu, 4 Sep 2003 12:21:28 EDT
New Thread Goodbye! (movin-on) :) **SOME NTC**
d. terstegge
Thu, 4 Sep 2003 12:15:45 +0200
Grabski III, John R.
Wed, 3 Sep 2003 09:16:00 -0400
New Thread GSFC/NASA Advisory about Terrestrial Sources of X-Ray Radiation
Dave Hillman
Wed, 10 Sep 2003 10:02:27 -0500
Steve Gregory
Wed, 10 Sep 2003 09:27:55 EDT
New Thread Hi-density testing
Steve Kelly
Tue, 30 Sep 2003 12:58:29 -0400
New Thread High heat sink board hand soldering
Werner Engelmaier
Mon, 15 Sep 2003 22:18:12 EDT
Don_well
Mon, 15 Sep 2003 11:45:37 +0800
New Thread High Temp Solder Sphere ( 5Sn / 95Pb)
Marsico, James
Wed, 24 Sep 2003 12:59:21 -0400
Victor Hernandez
Wed, 24 Sep 2003 08:45:38 -0500
New Thread Hole break out
Guy Ramsey
Tue, 16 Sep 2003 13:52:41 -0400
John Parsons
Tue, 16 Sep 2003 10:22:38 -0700
Victor Hernandez
Tue, 16 Sep 2003 12:14:42 -0500
New Thread I keeping my own emails back
Dieselberg, Ron
Fri, 5 Sep 2003 12:15:15 -0400
Roger Stoops
Fri, 5 Sep 2003 10:58:55 -0400
Leigh-Ann Litavis
Fri, 5 Sep 2003 10:46:29 EDT
New Thread Immersion Silver
Ezequiel Cruz
Tue, 23 Sep 2003 11:08:26 -0500
Mcmaster, Michael
Wed, 17 Sep 2003 17:23:58 -0700
George Milad
Wed, 17 Sep 2003 19:06:22 EDT
George Milad
Wed, 17 Sep 2003 19:00:20 EDT
Guy Ramsey
Wed, 17 Sep 2003 14:52:46 -0400
Black, Paul
Wed, 17 Sep 2003 14:13:21 -0400
New Thread In-Line AOI
Taylor, Royce
Tue, 2 Sep 2003 06:16:11 -0500
New Thread Inner Laye Ground Shorts
Franklin D Asbell
Thu, 18 Sep 2003 16:31:57 -0500
New Thread Inner Layer Ground Shorts
Brummer Chuck
Fri, 19 Sep 2003 08:24:53 -0700
Chezhian, Krishnan
Fri, 19 Sep 2003 13:14:59 +0800
Eddie Rocha
Thu, 18 Sep 2003 13:53:29 -0700
Donald Vischulis
Thu, 18 Sep 2003 13:00:08 -0500
Fineline Circuits, Inc.
Thu, 18 Sep 2003 12:07:06 -0400
<>
Thu, 18 Sep 2003 08:38:08 EDT
Rudy Sedlak
Thu, 18 Sep 2003 04:48:58 -0400
Krishnan C
Thu, 18 Sep 2003 02:29:12 -0500
New Thread Ionograph
Brian Ellis
Tue, 9 Sep 2003 14:22:58 +0300
David Douthit
Mon, 8 Sep 2003 17:22:31 -0700
Dehoyos, Ramon
Mon, 8 Sep 2003 13:41:11 -0700
David Douthit
Mon, 8 Sep 2003 13:05:28 -0700
Dehoyos, Ramon
Mon, 8 Sep 2003 10:10:41 -0700
Brian Ellis
Mon, 8 Sep 2003 17:18:32 +0300
Dehoyos, Ramon
Mon, 8 Sep 2003 06:27:58 -0700
Brian Ellis
Mon, 8 Sep 2003 15:33:27 +0300
joyce
Mon, 8 Sep 2003 08:19:08 -0400
Charles Caswell
Mon, 8 Sep 2003 07:17:50 -0500
Joe Fjelstad
Sat, 6 Sep 2003 12:51:36 EDT
Brian Ellis
Sat, 6 Sep 2003 10:29:27 +0300
Mel Parrish
Fri, 5 Sep 2003 15:55:01 -0500
Barmuta, Mike
Fri, 5 Sep 2003 13:42:53 -0700
Charles Caswell
Fri, 5 Sep 2003 14:41:40 -0500
Angela Gregor
Fri, 5 Sep 2003 14:25:29 -0700
New Thread Ionograph / Why "no clean"?
Reuven ROKAH
Tue, 9 Sep 2003 08:31:07 +0300
New Thread IPC 2004-2005 Technology Roadmap Kickoff Meeting
John Perry
Tue, 23 Sep 2003 16:15:04 -0500
New Thread IPC Designers Learning Symposium in Montreal, Canada!
Stephannie Caliendo
Tue, 23 Sep 2003 19:45:08 -0500
New Thread IPC Seeking Industry Experts on Tin Whiskers
James TerVeen
Mon, 22 Sep 2003 08:31:37 -0400
Wenger, George M.
Thu, 18 Sep 2003 08:35:49 -0500
Sklenar Vit (RBAU-EB/MGE4) *
Wed, 17 Sep 2003 06:31:42 +0200
Alexandra Curtis
Tue, 16 Sep 2003 15:51:27 -0500
New Thread IPC-2221/Electrical Conductor Spacing
Sefika Ozkal
Tue, 23 Sep 2003 15:57:19 +0300
New Thread IPC-356 netlist question
David Ricketts
Fri, 26 Sep 2003 10:10:34 -0700
Jeff Seeger
Thu, 25 Sep 2003 18:40:24 -0400
Miswald, Ron
Thu, 25 Sep 2003 16:15:38 -0500
New Thread IPC-7095 BGA land szie approximation (UC)
Lum Wee Mei
Wed, 24 Sep 2003 15:32:26 +0800
New Thread Karen Walters/USA/Skyworks is out of the office.
Karen Walters
Thu, 25 Sep 2003 17:00:51 -0400
New Thread Lambert PTH fatigue
Werner Engelmaier
Wed, 3 Sep 2003 23:07:35 EDT
Crepeau, Phil
Wed, 3 Sep 2003 16:47:57 -0700
Werner Engelmaier
Wed, 3 Sep 2003 17:15:16 EDT
Leo Lambert
Wed, 3 Sep 2003 14:54:06 -0100
Werner Engelmaier
Wed, 3 Sep 2003 14:34:47 EDT
New Thread Large PCB fabrication
Eddie Rocha
Fri, 26 Sep 2003 11:16:13 -0700
New Thread Lead Free
Peter Swanson
Wed, 3 Sep 2003 08:29:49 +0100
Dave Chapman
Tue, 2 Sep 2003 15:35:04 -0500
New Thread Lead free components
Guy Ramsey
Wed, 24 Sep 2003 16:08:56 -0400
Karl Sauter
Wed, 24 Sep 2003 13:03:09 -0700
Krmpotich, Mark
Wed, 24 Sep 2003 15:43:51 -0400
West, Jim
Wed, 24 Sep 2003 15:31:52 -0400
West, Jim
Wed, 24 Sep 2003 15:25:09 -0400
New Thread Lead Free PCB's
Werner Engelmaier
Wed, 24 Sep 2003 15:01:42 EDT
Karl Sauter
Wed, 24 Sep 2003 11:58:35 -0700
Yannick Brisson
Wed, 24 Sep 2003 10:44:08 -0400
Dave Chapman
Wed, 24 Sep 2003 09:31:42 -0500
New Thread Lead Free Solder
Dehoyos, Ramon
Tue, 23 Sep 2003 12:56:24 -0700
New Thread LED Soldering Query
Reuven ROKAH
Mon, 15 Sep 2003 14:43:25 +0300
Peter Swanson
Sun, 14 Sep 2003 15:36:34 +0100
joyce
Fri, 12 Sep 2003 11:50:30 -0400
Mike McMonagle
Fri, 12 Sep 2003 09:33:00 -0500
Vivari, John
Fri, 12 Sep 2003 10:18:23 -0400
<>
Fri, 12 Sep 2003 10:17:19 EDT
Mike McMonagle
Fri, 12 Sep 2003 09:15:32 -0500
Kasprzak, Bill (sys) USX
Fri, 12 Sep 2003 09:40:50 -0400
Kathy Kuhlow
Fri, 12 Sep 2003 08:26:11 -0500
Bev Christian
Fri, 12 Sep 2003 08:11:20 -0400
Mike McMonagle
Fri, 12 Sep 2003 07:01:10 -0500
joyce
Fri, 12 Sep 2003 07:43:05 -0400
Peter Swanson
Fri, 12 Sep 2003 11:09:30 +0100
Richard Brennan
Fri, 12 Sep 2003 10:52:09 +0100
Peter Swanson
Fri, 12 Sep 2003 09:56:54 +0100
New Thread Liquid Mask
Dehoyos, Ramon
Thu, 4 Sep 2003 05:21:02 -0700
joyce
Thu, 4 Sep 2003 08:13:23 -0400
d. terstegge
Thu, 4 Sep 2003 13:49:51 +0200
Brian Ellis
Thu, 4 Sep 2003 13:54:12 +0300
Reuven ROKAH
Thu, 4 Sep 2003 12:29:58 +0300
Leo Lambert
Wed, 3 Sep 2003 16:35:56 -0100
Kathy Kuhlow
Wed, 3 Sep 2003 14:48:50 -0500
Doug Pauls
Wed, 3 Sep 2003 14:46:37 -0500
Charles Caswell
Wed, 3 Sep 2003 14:47:12 -0500
Dehoyos, Ramon
Wed, 3 Sep 2003 12:36:00 -0700
Dobbs, Marie
Wed, 3 Sep 2003 14:56:48 -0400
New Thread looking for Fuji 8X2 feeders to fit a CP4-2
Lakshmi Dwivedula
Tue, 9 Sep 2003 17:47:43 -0400
Taylor, Royce
Tue, 9 Sep 2003 13:03:00 -0500
New Thread LTCC
John Foster
Tue, 16 Sep 2003 10:56:38 -0700
Creswick, Steven
Mon, 15 Sep 2003 06:20:15 -0400
Ingemar Hernefjord (KC/EMW)
Mon, 15 Sep 2003 10:21:45 +0200
John Foster
Fri, 12 Sep 2003 17:38:21 -0700
New Thread Materials Inert to Fungus and Fungus Nutrients
Doug Pauls
Wed, 3 Sep 2003 13:04:28 -0500
Edwin Louis
Wed, 3 Sep 2003 11:11:33 -0400
New Thread measurement systems calibration
Carroll, George
Tue, 9 Sep 2003 12:55:09 -0400
Sergio T. Ruiz
Tue, 9 Sep 2003 11:53:38 -0700
Franklin D Asbell
Tue, 9 Sep 2003 11:02:11 -0500
Sergio T. Ruiz
Tue, 9 Sep 2003 11:45:25 -0700
New Thread measuring the thickness of cured conformal coating
Shoda, Steve
Wed, 17 Sep 2003 17:19:22 -0400
<>
Wed, 17 Sep 2003 09:15:14 -0500
Carroll, George
Wed, 17 Sep 2003 08:36:48 -0400
<>
Tue, 16 Sep 2003 19:11:33 EDT
Dehoyos, Ramon
Tue, 16 Sep 2003 13:17:16 -0700
Collins Graham
Tue, 16 Sep 2003 15:02:07 -0400
New Thread MIL-P-13949 GBN
David Bergman
Thu, 4 Sep 2003 17:57:09 -0500
Jim Geer
Thu, 4 Sep 2003 15:36:39 -0700
New Thread MIL-P-55110
Mark Hargreaves
Tue, 30 Sep 2003 08:10:12 -0400
Geoff Layhe
Tue, 30 Sep 2003 09:02:10 +0100
Daan Terstegge
Mon, 29 Sep 2003 22:11:17 +0200
Franklin D Asbell
Mon, 29 Sep 2003 13:39:09 -0500
New Thread Mil-P-55110 versus MIL-PRF-31032
Hinners Hans M Civ WRALC/LUGE
Wed, 3 Sep 2003 14:13:34 -0000
New Thread Moisture under chip capacitors
Rodney Miller
Fri, 12 Sep 2003 09:51:31 -0500
Dehoyos, Ramon
Thu, 11 Sep 2003 13:13:25 -0700
Joseph H. Smith
Thu, 11 Sep 2003 12:23:04 -0700
joyce
Thu, 11 Sep 2003 15:15:05 -0400
Peter L.
Thu, 11 Sep 2003 13:50:53 -0500
New Thread More on MIL-P-13949 GBN
Jim Geer
Fri, 5 Sep 2003 11:08:00 -0700
New Thread Need a specification number
Dehoyos, Ramon
Wed, 10 Sep 2003 12:06:37 -0700
Kasprzak, Bill (sys) USX
Wed, 10 Sep 2003 13:57:03 -0400
New Thread New forum on www.smtinfo.net
Daan Terstegge
Mon, 15 Sep 2003 21:23:04 +0200
New Thread Notices
Mike Fenner
Wed, 10 Sep 2003 08:28:33 +0100
Brian Ellis
Wed, 10 Sep 2003 09:07:21 +0300
Mike Fenner
Tue, 9 Sep 2003 16:40:52 +0100
Daan Terstegge
Tue, 9 Sep 2003 17:46:59 +0200
Crepeau, Phil
Tue, 9 Sep 2003 08:40:15 -0700
Tom Burek
Tue, 9 Sep 2003 11:34:59 -0400
Charlie Pitarys
Tue, 9 Sep 2003 11:18:22 -0400
Rudy Sedlak
Tue, 9 Sep 2003 11:24:52 EDT
John Parsons
Tue, 9 Sep 2003 08:28:09 -0700
Carroll, George
Tue, 9 Sep 2003 10:52:54 -0400
Eric Dawson
Tue, 9 Sep 2003 16:06:18 +0100
Kathy Jenczewski
Tue, 9 Sep 2003 09:56:10 -0500
Leigh-Ann Litavis
Tue, 9 Sep 2003 11:03:20 EDT
Leo Roos
Tue, 9 Sep 2003 06:14:46 -0700
<>
Tue, 9 Sep 2003 10:51:59 EDT
Phil Nutting
Tue, 9 Sep 2003 10:49:52 -0400
Werner Engelmaier
Tue, 9 Sep 2003 10:46:14 EDT
New Thread OSP vs HASL
<>
Fri, 19 Sep 2003 17:49:39 EDT
Franklin D Asbell
Fri, 19 Sep 2003 15:41:43 -0500
Carlr Ray
Fri, 19 Sep 2003 15:12:04 -0500
Franklin D Asbell
Fri, 19 Sep 2003 15:19:10 -0500
Victor Hernandez
Fri, 19 Sep 2003 14:47:00 -0500
New Thread Pace soldering irons
Mike McMonagle
Wed, 17 Sep 2003 06:52:09 -0500
Charles Caswell
Wed, 17 Sep 2003 06:49:23 -0500
Diamond, Pat
Wed, 17 Sep 2003 08:32:21 +0100
New Thread paper
joyce
Thu, 4 Sep 2003 11:46:31 -0400
New Thread PCB delamination Evaluation
Fazioli, Dan (ACLE)
Thu, 4 Sep 2003 08:54:12 -0600
Creswick, Steven
Wed, 3 Sep 2003 14:34:11 -0400
Tom Gervascio
Wed, 3 Sep 2003 14:23:45 -0400
Victor Hernandez
Wed, 3 Sep 2003 12:48:16 -0500
Bev Christian
Wed, 3 Sep 2003 13:12:32 -0400
Victor Hernandez
Wed, 3 Sep 2003 11:12:05 -0500
New Thread PCB substrate identification markings
Geoff Layhe
Mon, 29 Sep 2003 11:23:55 +0100
McCall,Doug
Mon, 29 Sep 2003 11:05:45 +0100
New Thread pic's
Lance Mayes
Wed, 3 Sep 2003 11:27:32 -0600
Rodney Miller
Wed, 3 Sep 2003 11:37:26 -0500
Dehoyos, Ramon
Wed, 3 Sep 2003 07:33:25 -0700
Bev Christian
Wed, 3 Sep 2003 09:01:03 -0400
Werner Engelmaier
Wed, 3 Sep 2003 07:54:41 EDT
Gregg Owens
Tue, 2 Sep 2003 20:51:16 -0700
Howard Watson
Tue, 2 Sep 2003 16:07:43 -0600
Dorothy Lush
Tue, 2 Sep 2003 14:21:16 -0700
Carlr Ray
Tue, 2 Sep 2003 15:18:32 -0500
Wenger, George M.
Tue, 2 Sep 2003 15:02:21 -0500
Dave Chapman
Tue, 2 Sep 2003 15:01:11 -0500
Bev Christian
Tue, 2 Sep 2003 15:48:21 -0400
Victor Hernandez
Tue, 2 Sep 2003 14:46:41 -0500
Tom Parkinson
Tue, 2 Sep 2003 15:42:28 -0400
Lance Mayes
Tue, 2 Sep 2003 15:16:06 -0400
New Thread Pink Ring not for space application?
Lum Wee Mei
Wed, 1 Oct 2003 12:40:34 +0800
New Thread Potential Problems with Mold Compound
joyce
Fri, 19 Sep 2003 10:13:37 -0400
Creswick, Steven
Fri, 19 Sep 2003 09:55:05 -0400
New Thread Preheat of ceramic chip capacitors
Dave Hillman
Thu, 4 Sep 2003 12:20:27 -0500
Werner Engelmaier
Thu, 4 Sep 2003 13:03:54 EDT
joyce
Thu, 4 Sep 2003 12:25:22 -0400
Wenger, George M.
Thu, 4 Sep 2003 11:25:08 -0500
John Maxwell
Thu, 4 Sep 2003 09:14:29 -0700
Wenger, George M.
Thu, 4 Sep 2003 11:13:30 -0500
Guy Ramsey
Thu, 4 Sep 2003 12:13:05 -0400
Mel Parrish
Thu, 4 Sep 2003 11:08:10 -0500
d. terstegge
Thu, 4 Sep 2003 17:32:48 +0200
New Thread prepreg classification
Whittaker, Dewey (AZ75)
Thu, 25 Sep 2003 09:45:30 -0700
Geoff Layhe
Thu, 25 Sep 2003 17:26:06 +0100
Collins Graham
Thu, 25 Sep 2003 12:12:10 -0400
New Thread Probimer 77 soldermask
Smith, Russell (US LA)
Mon, 29 Sep 2003 09:40:44 -0700
Charles Caswell
Mon, 29 Sep 2003 09:01:06 -0500
Smith, Russell (US LA)
Fri, 26 Sep 2003 13:12:33 -0700
Charles Caswell
Fri, 26 Sep 2003 14:28:57 -0500
Smith, Russell (US LA)
Fri, 26 Sep 2003 11:50:42 -0700
Charles Caswell
Fri, 26 Sep 2003 09:56:31 -0500
New Thread PTI value
Thomas Beneken
Mon, 22 Sep 2003 13:43:38 +0200
Dieselberg, Ron
Mon, 22 Sep 2003 06:35:08 -0400
russell(羅素)
Thu, 18 Sep 2003 10:59:09 +0800
DUTTON Phil
Thu, 18 Sep 2003 12:20:49 +1000
russell(羅素)
Thu, 18 Sep 2003 09:45:57 +0800
DUTTON Phil
Thu, 18 Sep 2003 11:13:47 +1000
russell(羅素)
Thu, 18 Sep 2003 08:58:08 +0800
New Thread PWB MATERIAL
Marsico, James
Wed, 24 Sep 2003 14:47:47 -0400
New Thread PWB repair
Franklin D Asbell
Fri, 26 Sep 2003 07:52:33 -0500
Charles Caswell
Fri, 26 Sep 2003 07:16:39 -0500
New Thread QFN layout designs
Matthias Mansfeld
Fri, 5 Sep 2003 21:23:03 +0200
New Thread Questions on Soft gold plating.
joyce
Wed, 3 Sep 2003 13:39:19 -0400
Misner, Bruce
Wed, 3 Sep 2003 10:59:34 -0500
<>
Tue, 2 Sep 2003 14:03:43 EDT
New Thread RE : [TN] PWB repair
Eric Laroche
Mon, 29 Sep 2003 17:21:45 -0400
New Thread RE : [TN] Scanning a document and saving it as a pdf file
Eric Laroche
Tue, 30 Sep 2003 11:36:01 -0400
New Thread RE : [TN] Silicone conformal coating
Eric Laroche
Thu, 4 Sep 2003 15:40:13 -0400
New Thread Reference book for SMT
d. terstegge
Fri, 5 Sep 2003 13:51:32 +0200
Crain, Bob
Thu, 4 Sep 2003 17:30:55 -0400
New Thread Reflow Oven SMR 400
Neil Maloney
Thu, 4 Sep 2003 15:19:47 -0500
Morse, Carrie
Thu, 4 Sep 2003 11:06:47 -0400
Poh Kong Hui
Thu, 4 Sep 2003 17:24:28 +0800
New Thread Reliability question
Reuven ROKAH
Sun, 21 Sep 2003 14:54:32 +0300
Werner Engelmaier
Fri, 19 Sep 2003 14:37:23 EDT
Rodney Miller
Fri, 19 Sep 2003 08:45:20 -0500
Chezhian, Krishnan
Fri, 19 Sep 2003 15:51:22 +0800
Rodney Miller
Thu, 18 Sep 2003 10:05:30 -0500
Mcmaster, Michael
Wed, 17 Sep 2003 17:28:11 -0700
Joe Fjelstad
Wed, 17 Sep 2003 20:07:40 EDT
Werner Engelmaier
Wed, 17 Sep 2003 20:06:17 EDT
Happy Holden
Wed, 17 Sep 2003 11:33:50 -0400
Ed Berti
Wed, 17 Sep 2003 08:51:47 -0400
New Thread resend.. controlled impedance - characteristic vs. differential
Sergio T. Ruiz
Mon, 22 Sep 2003 12:15:44 -0700
New Thread Rework
Juan T. Marugán
Thu, 25 Sep 2003 03:44:14 -0500
Mel Parrish
Wed, 24 Sep 2003 09:08:30 -0500
Charles Caswell
Wed, 24 Sep 2003 08:40:52 -0500
Angela Gregor
Wed, 24 Sep 2003 09:03:19 -0700
New Thread Robert Coburn/TDI_NOTES is out of the office.
Robert Coburn
Tue, 23 Sep 2003 01:14:45 -0400
New Thread Saponifier Concentration
Dehoyos, Ramon
Wed, 24 Sep 2003 12:10:52 -0700
Rudy Sedlak
Wed, 24 Sep 2003 10:42:25 EDT
Charlie Pitarys
Wed, 24 Sep 2003 09:23:23 -0400
Tom Waznis
Wed, 24 Sep 2003 00:16:41 -0700
Brian Ellis
Wed, 24 Sep 2003 10:01:16 +0300
Rudy Sedlak
Tue, 23 Sep 2003 18:10:47 EDT
Louis Hart
Tue, 23 Sep 2003 16:55:15 -0400
Rudy Sedlak
Tue, 23 Sep 2003 13:13:29 EDT
Guy Ramsey
Tue, 23 Sep 2003 13:10:35 -0400
Brian Ellis
Tue, 23 Sep 2003 18:53:48 +0300
Roger Cook
Tue, 23 Sep 2003 10:25:37 -0500
New Thread Saponifier Concentration II
Rudy Sedlak
Wed, 24 Sep 2003 10:47:09 EDT
New Thread Saponifier Concentration More than you ever wanted to kn ow..
Charlie Pitarys
Wed, 24 Sep 2003 17:15:17 -0400
New Thread Saponifier Concentration More than you ever wanted to know..
Rudy Sedlak
Wed, 24 Sep 2003 15:47:57 EDT
Brian Ellis
Wed, 24 Sep 2003 18:34:41 +0300
Rudy Sedlak
Wed, 24 Sep 2003 11:02:32 EDT
New Thread Scanning a document and saving it as a pdf file
Tom Waznis
Tue, 30 Sep 2003 08:06:56 -0700
Fineline Circuits, Inc.
Tue, 30 Sep 2003 10:04:20 -0400
Chris Robertson
Mon, 29 Sep 2003 14:13:18 -0500
Rich Lasko
Mon, 29 Sep 2003 14:21:03 -0500
Mike McMonagle
Mon, 29 Sep 2003 13:59:04 -0500
Croslin, Robert
Mon, 29 Sep 2003 14:54:56 -0400
Blair K. Hogg
Mon, 29 Sep 2003 14:40:34 -0400
Jason W. Gregory
Mon, 29 Sep 2003 13:42:36 -0500
Rich Lasko
Mon, 29 Sep 2003 13:22:05 -0500
New Thread Selective Edge Plating
Dehoyos, Ramon
Mon, 29 Sep 2003 12:12:31 -0700
Wayne Pritchett
Mon, 29 Sep 2003 08:08:44 -0400
Brooks,Bill
Mon, 29 Sep 2003 09:15:03 -0700
Croslin, Robert
Mon, 29 Sep 2003 09:29:54 -0400
<>
Fri, 26 Sep 2003 14:16:44 EDT
Eddie Rocha
Fri, 26 Sep 2003 11:11:19 -0700
Brooks,Bill
Fri, 26 Sep 2003 11:01:53 -0700
Croslin, Robert
Fri, 26 Sep 2003 13:11:10 -0400
New Thread Self Align BGAs less radiation
Dave Chapman
Wed, 10 Sep 2003 12:23:08 -0500
Dehoyos, Ramon
Wed, 10 Sep 2003 10:15:52 -0700
New Thread Silicone conformal coating
Graham Naisbitt
Tue, 16 Sep 2003 09:52:38 +0100
Tegehall Per-Erik
Fri, 12 Sep 2003 08:42:01 +0200
Tegehall Per-Erik
Thu, 11 Sep 2003 13:15:47 +0200
joyce
Wed, 10 Sep 2003 14:25:28 -0400
David Douthit
Wed, 10 Sep 2003 10:56:00 -0700
Dehoyos, Ramon
Wed, 10 Sep 2003 06:07:33 -0700
David Douthit
Wed, 10 Sep 2003 06:07:36 -0700
Shoda, Steve
Wed, 10 Sep 2003 07:34:43 -0400
Tegehall Per-Erik
Wed, 10 Sep 2003 08:55:52 +0200
Shoda, Steve
Tue, 9 Sep 2003 14:50:25 -0400
David Douthit
Tue, 9 Sep 2003 10:36:35 -0700
Dehoyos, Ramon
Tue, 9 Sep 2003 06:08:02 -0700
Brian Ellis
Tue, 9 Sep 2003 15:21:03 +0300
Tegehall Per-Erik
Tue, 9 Sep 2003 14:08:40 +0200
joyce
Tue, 9 Sep 2003 07:49:31 -0400
Brian Ellis
Tue, 9 Sep 2003 14:10:24 +0300
Tegehall Per-Erik
Tue, 9 Sep 2003 08:33:29 +0200
joyce
Mon, 8 Sep 2003 12:24:07 -0400
Brian Ellis
Mon, 8 Sep 2003 17:31:00 +0300
Misner, Bruce
Mon, 8 Sep 2003 09:09:32 -0500
Brian Ellis
Mon, 8 Sep 2003 17:08:36 +0300
Steve Gregory
Mon, 8 Sep 2003 08:54:16 EDT
Brian Ellis
Sat, 6 Sep 2003 10:48:02 +0300
Dehoyos, Ramon
Fri, 5 Sep 2003 07:40:24 -0700
Tegehall Per-Erik
Fri, 5 Sep 2003 10:44:28 +0200
Brian Ellis
Fri, 5 Sep 2003 10:02:19 +0300
Brian Ellis
Fri, 5 Sep 2003 10:01:29 +0300
Tegehall Per-Erik
Fri, 5 Sep 2003 08:37:51 +0200
<>
Thu, 4 Sep 2003 22:37:44 EDT
David Douthit
Thu, 4 Sep 2003 17:12:59 -0700
Hamilton, Dudley
Thu, 4 Sep 2003 15:37:35 -0500
Barmuta, Mike
Thu, 4 Sep 2003 13:44:40 -0700
Lee Whiteman
Thu, 4 Sep 2003 16:31:16 -0400
Alcorn, Brent
Thu, 4 Sep 2003 16:07:13 -0400
joyce
Thu, 4 Sep 2003 15:55:37 -0400
Steve Gregory
Thu, 4 Sep 2003 15:34:32 EDT
New Thread Silkscreen in solder pad
Franklin D Asbell
Thu, 25 Sep 2003 13:37:01 -0500
Guy Ramsey
Thu, 25 Sep 2003 12:05:59 -0400
Guy Ramsey
Thu, 25 Sep 2003 08:56:58 -0400
Hal Winslow
Wed, 24 Sep 2003 17:05:12 -0400
Franklin D Asbell
Wed, 24 Sep 2003 16:05:44 -0500
Black, Paul
Wed, 24 Sep 2003 16:34:23 -0400
Guy Ramsey
Wed, 24 Sep 2003 16:22:32 -0400
Franklin D Asbell
Wed, 24 Sep 2003 15:01:08 -0500
West, Jim
Wed, 24 Sep 2003 15:33:22 -0400
New Thread Silver Immersion right for fine pitch?
Dave Chapman
Fri, 26 Sep 2003 06:52:12 -0500
<>
Thu, 25 Sep 2003 23:13:28 EDT
Lakshmi Dwivedula
Thu, 25 Sep 2003 21:24:13 -0400
Krmpotich, Mark
Thu, 25 Sep 2003 16:33:08 -0400
Brooks,Bill
Thu, 25 Sep 2003 13:08:15 -0700
New Thread Software package validation
Mark Austin
Tue, 23 Sep 2003 11:15:00 +0100
Reid, Lorraine
Tue, 23 Sep 2003 09:54:17 +0100
New Thread Solder Balls
Black, Paul
Fri, 26 Sep 2003 08:01:35 -0400
Carlr Ray
Thu, 25 Sep 2003 17:54:30 -0500
Black, Paul
Thu, 25 Sep 2003 09:25:21 -0400
Chezhian, Krishnan
Thu, 25 Sep 2003 13:22:56 +0800
Reuven ROKAH
Thu, 25 Sep 2003 08:08:07 +0300
Leo Roos
Wed, 24 Sep 2003 08:29:36 -0700
Sherif Refaat
Wed, 24 Sep 2003 10:14:28 -0400
Black, Paul
Wed, 24 Sep 2003 09:53:05 -0400
Steve Gregory
Wed, 24 Sep 2003 09:13:16 EDT
Tony Steinke
Wed, 24 Sep 2003 09:03:24 -0400
joyce
Wed, 24 Sep 2003 08:09:18 -0400
Bev Christian
Wed, 24 Sep 2003 08:05:59 -0400
Black, Paul
Wed, 24 Sep 2003 07:57:24 -0400
New Thread Solder balls under parts
Morse, Carrie
Tue, 2 Sep 2003 14:06:16 -0400
Crain, Bob
Tue, 2 Sep 2003 13:54:33 -0400
New Thread Solder shorts defects in the passives components at the solder side in double side board through the wave solder
Dehoyos, Ramon
Mon, 22 Sep 2003 09:49:40 -0700
D_bonilla
Fri, 19 Sep 2003 16:35:37 -0400
New Thread Solderability Testing
Guy Ramsey
Wed, 17 Sep 2003 11:35:50 -0400
New Thread Soldering Iron Analyzers
Juan T. Marugán
Wed, 17 Sep 2003 01:54:28 -0500
<>
Tue, 16 Sep 2003 19:19:28 EDT
Charles Caswell
Tue, 16 Sep 2003 09:22:01 -0500
Cal Driscoll
Tue, 16 Sep 2003 10:09:54 -0400
Blair K. Hogg
Tue, 16 Sep 2003 09:32:25 -0400
New Thread Spec question
Jeff Seeger
Thu, 25 Sep 2003 11:53:07 -0400
Graham Naisbitt
Thu, 25 Sep 2003 16:44:51 +0100
Jeff Seeger
Thu, 25 Sep 2003 11:21:59 -0400
Crepeau, Phil
Thu, 25 Sep 2003 07:17:58 -0700
panch
Wed, 24 Sep 2003 16:54:13 -0700
New Thread Speedboard Experience
George Franck
Thu, 18 Sep 2003 08:19:04 -0400
Mcmaster, Michael
Wed, 17 Sep 2003 16:59:40 -0700
Bruce Wilson
Wed, 17 Sep 2003 15:10:12 -0700
New Thread spray nozzle configuration for etching
Adam Seychell
Wed, 1 Oct 2003 15:10:25 +1000
New Thread Static sensitive components
Guy Ramsey
Thu, 4 Sep 2003 11:42:39 -0400
Carl VanWormer
Thu, 4 Sep 2003 07:08:43 -0700
Eric Laroche
Thu, 4 Sep 2003 09:26:00 -0400
New Thread stencil
Coleman, Bill
Fri, 5 Sep 2003 10:40:06 -0600
Cagle, James
Fri, 5 Sep 2003 10:37:00 -0400
Carlr Ray
Fri, 5 Sep 2003 08:28:42 -0500
Jason W. Gregory
Fri, 5 Sep 2003 07:33:45 -0500
Dave Chapman
Fri, 5 Sep 2003 07:15:36 -0500
Mike McMonagle
Fri, 5 Sep 2003 07:09:20 -0500
Dave Chapman
Fri, 5 Sep 2003 06:41:03 -0500
New Thread Strange part cracking...
David Douthit
Tue, 16 Sep 2003 20:16:20 -0700
Steve Gregory
Tue, 16 Sep 2003 20:48:37 EDT
David Douthit
Tue, 16 Sep 2003 17:42:11 -0700
Steve Gregory
Tue, 16 Sep 2003 13:43:00 EDT
Morse, Carrie
Tue, 16 Sep 2003 13:40:33 -0400
Guy Ramsey
Tue, 16 Sep 2003 13:37:05 -0400
Steve Gregory
Tue, 16 Sep 2003 12:02:31 EDT
New Thread Termination material
<>
Fri, 5 Sep 2003 18:07:27 EDT
H. Molema
Tue, 2 Sep 2003 11:39:36 +0200
Werner Engelmaier
Mon, 1 Sep 2003 15:02:26 EDT
New Thread Tolerances
Valerie St.Cyr
Thu, 18 Sep 2003 13:20:41 -0400
Franklin D Asbell
Thu, 18 Sep 2003 11:31:57 -0500
Joe Fjelstad
Thu, 18 Sep 2003 12:04:27 EDT
Mike McMonagle
Thu, 18 Sep 2003 10:59:20 -0500
Chris Robertson
Thu, 18 Sep 2003 10:45:21 -0500
Brian Ellis
Thu, 18 Sep 2003 18:44:25 +0300
Kathy Kuhlow
Thu, 18 Sep 2003 10:28:52 -0500
New Thread Training
Blair K. Hogg
Tue, 2 Sep 2003 14:35:01 -0400
Dieselberg, Ron
Tue, 2 Sep 2003 09:23:00 -0400
Dobbs, Marie
Tue, 2 Sep 2003 08:30:31 -0400
Marsico, James
Tue, 2 Sep 2003 07:48:34 -0400
Dieselberg, Ron
Tue, 2 Sep 2003 06:41:02 -0400
New Thread Vacuum Furnace
Creswick, Steven
Fri, 12 Sep 2003 14:57:19 -0400
Guy Ramsey
Fri, 12 Sep 2003 14:21:56 -0400
New Thread Vibration specs
Bill Sullivan
Fri, 12 Sep 2003 13:48:34 -0700
New Thread Vibration testing
Hinners Hans M Civ WRALC/LUGE
Wed, 3 Sep 2003 13:10:19 -0000
Ross K. Wilcoxon
Tue, 2 Sep 2003 08:15:44 -0500
New Thread Virus SOBIG etc., was: [TN] Notices
Matthias Mansfeld
Tue, 9 Sep 2003 17:31:34 +0200
New Thread warp heatsink
Hinners Hans M Civ WRALC/LUGE
Mon, 22 Sep 2003 12:44:55 -0000
ricky
Fri, 19 Sep 2003 19:03:54 -0500
New Thread Where is Mike Fitts?
Happy Holden
Thu, 11 Sep 2003 10:02:53 -0400
David Bergman
Thu, 11 Sep 2003 08:55:17 -0500
Roger Stoops
Thu, 11 Sep 2003 09:49:32 -0400
New Thread Wire Crimp Terminals Plating (Sn)
David Douthit
Tue, 23 Sep 2003 05:35:22 -0700
Victor Hernandez
Tue, 23 Sep 2003 07:05:14 -0500
New Thread Xray laminography source
<>
Tue, 2 Sep 2003 11:17:34 -0400
New Thread Zinc Plating Finish
joyce
Tue, 16 Sep 2003 11:27:01 -0400
Dave Hillman
Tue, 16 Sep 2003 09:21:42 -0500
Jay Brusse
Sat, 13 Sep 2003 01:55:40 +0000
Jack Crawford
Fri, 12 Sep 2003 09:37:16 -0500
Dave Hillman
Thu, 11 Sep 2003 13:15:12 -0500
joyce
Thu, 11 Sep 2003 13:33:59 -0400
Dave Hillman
Thu, 11 Sep 2003 12:11:46 -0500
joyce
Thu, 11 Sep 2003 12:56:51 -0400
David Douthit
Thu, 11 Sep 2003 10:09:45 -0700
Frank L Norman
Thu, 11 Sep 2003 09:48:22 -0700
Dave Hillman
Thu, 11 Sep 2003 11:35:40 -0500
Steve Gregory
Thu, 11 Sep 2003 12:16:41 EDT
Victor Hernandez
Thu, 11 Sep 2003 10:26:40 -0500
New Thread Zinc Plating Finish(3)
Victor Hernandez
Fri, 12 Sep 2003 07:20:39 -0500
New Thread [NTC] Looking under BGA
Victor Hernandez
Tue, 2 Sep 2003 09:25:41 -0500
Rodney Miller
Tue, 2 Sep 2003 08:51:03 -0500

ATOM RSS1 RSS2