TECHNET Archives

November 2001

TechNet@IPC.ORG
Options: Hide Table of Contents

(none) (1 Message)
(VIRUS ALERT!!!) [TN] O. MATERIALS. TO : VALUED ASSOCIATES. (2 Messages)
(VIRUS ALERT!!!) [TN] O. MATERIALS. TO : VALUEDASSOCIATES. (2 Messages)
0603 Components (Torque Value) (1 Message)
0603 Components. (11 Messages)
<No subject> (2 Messages)
Acceptability of flex boards (2 Messages)
Actuator Tabs falling off (3 Messages)
Adhesion problems of galvanic gold on electroless nickel gold (5 Messages)
Adhesive Matrix (3 Messages)
ADHESIVES - PROCESSES, VOIDING, AND THERMAL EFFICIENCY (1 Message)
Aerospace PCB consultants (4 Messages)
Anita Sargent/Endicott/IBM is out of the office. (1 Message)
another one bites the dust (1 Message)
Ansı/J-std-001 (1 Message)
Ansi/J-std-001 (1 Message)
Antw: [TN] Blow holes in solder joints (1 Message)
AOI AND STENCILS (1 Message)
Apologies (1 Message)
Aspect Ratio (13 Messages)
Assembly and rework Temperatures. (2 Messages)
Autocad to Solidworks (2 Messages)
AW: [TN] Actuator Tabs falling off (1 Message)
AW: [TN] AW: [TN] New Product Introduction checklist (2 Messages)
AW: [TN] BGA voids (6 Messages)
AW: [TN] Blow holes in solder joints (3 Messages)
AW: [TN] Handling of moisture sensitive devices (1 Message)
AW: [TN] handling single parts (1 Message)
AW: [TN] New Product Introduction checklist (2 Messages)
AW: [TN] Resistor Networks of 0.5 mm Pitch (1 Message)
best finish for through hole boards (3 Messages)
BGA bone of contention (7 Messages)
BGA long term storage? (9 Messages)
BGA rework (4 Messages)
BGA rework - part removal profile (4 Messages)
BGA Via's to tent or cover or not? (4 Messages)
BGA voids (8 Messages)
BGA's in design (11 Messages)
Blind via hole - PTH Specification (5 Messages)
Blow holes in solder joints (4 Messages)
board dunked in wave solder (8 Messages)
Board Warp (10 Messages)
Board Warpage/CEM-1 Material (1 Message)
Book on PCI, compact PCI and PMC standards (3 Messages)
Buried Capacitance - unlicensed (7 Messages)
Cab Maestro 2M blades (3 Messages)
CCGA's, the good, the bad, and the ugly... (5 Messages)
Circuit Repair Facility (5 Messages)
Cleaning paste when misaligned. (1 Message)
Color additives for conformal coat (5 Messages)
Component Area Usage - Reality Check (2 Messages)
Component Charactristics (1 Message)
Component Scrap Rates (2 Messages)
Conformal Coat House (1 Message)
conformal coating (2 Messages)
Conformal Coating to IPC Class 3 (4 Messages)
Copper Invar Copper and BGA's (2 Messages)
cracked flashmemory (1 Message)
Crystal Filters (2 Messages)
Cu CL etcher (4 Messages)
CuCl etch normality (3 Messages)
Dave Hoover Where Are You? (3 Messages)
Dielectric constant vs degree of cure , FR4 (5 Messages)
Differential impedance (7 Messages)
DLT board repair (2 Messages)
E-Business auctions for EMS providers... (6 Messages)
E-mail Address Changed (2 Messages)
Effect of BGA rework to surrounding components (5 Messages)
Electrically Conductive Epoxies (3 Messages)
Electrovert Minipak 300 (5 Messages)
ENIG-Black Pad (5 Messages)
Fiducial Markings - do they mean anything? (1 Message)
Flex Delamination (2 Messages)
Flexible PC Board (6 Messages)
Formula? (10 Messages)
FTIR Cards (4 Messages)
Glue stencils (1 Message)
Gold Embrittlement (4 Messages)
Gold removal on ceramic chip carrier... (5 Messages)
Good SPC software (4 Messages)
grounds.... (1 Message)
Handling of moisture sensitive devices (5 Messages)
handling single parts (2 Messages)
handling surface mount components (1 Message)
HELP <=> PCB vs. High Vacuum <=> HELP (7 Messages)
High Tg FR-4 (14 Messages)
Hot Oil (15 Messages)
How to remove silk screen from the plated area (2 Messages)
Independant Board Analysis (1 Message)
Information about Double Reflow (3 Messages)
Inner Layer Issues... (5 Messages)
Innerlayer shorts - predictions vs. reality (1 Message)
Intermetallic Layers (11 Messages)
ion chromatography (3 Messages)
IPC SM-782 on-line calculator (4 Messages)
IPC6014 (2 Messages)
IPCDC Boston mtg 11-Dec, Current Carrying update (1 Message)
Is X-RAY can damaged Flash IC i.e. imbedded program ? (1 Message)
Is X-RAY can damaged Flash IC i.e. imbeded program ? (7 Messages)
Isolation between connector pins (6 Messages)
Kick my butt if you wish (1 Message)
Kovar (7 Messages)
Kovar Etching (1 Message)
Land pattern for wave soldering (1 Message)
Land size for wave soldering (1 Message)
LLP Leadless LeadFrame Package (2 Messages)
Looking for a way to oxidized tin-lead plated component (6 Messages)
Looking for Information (4 Messages)
Manual Press for PEM PCB fastener (11 Messages)
mil spec info (2 Messages)
MIL-STD-883E, TM 2030 and facing in (1 Message)
Military PCB (3 Messages)
Moisture Sensitive Devices (3 Messages)
Need Help with 85-15 Altera QFPs (3 Messages)
New Product Introduction checklist (9 Messages)
nitrogen purity (2 Messages)
No power on after underfill (7 Messages)
Non-wetting (4 Messages)
O. MATERIALS. TO : VALUED ASSOCIATES. (2 Messages)
OA & LCCs (1 Message)
oops (1 Message)
Optical Component and SMT and PTH Assembly and repair (3 Messages)
Organic Silver PCB's (8 Messages)
Out Of The Office (1 Message)
Over-etch (15 Messages)
Over-etch II (6 Messages)
Pad Lifting (2 Messages)
Pads -vs- Paste -vs- Components (2 Messages)
Parylene coating PBGAs (2 Messages)
PCB Assembly demographics (2 Messages)
Pick & place equipment process control (1 Message)
Pick-and-Place Evaluation Checklist? (6 Messages)
POLYIMIDE TMA RESULTS (1 Message)
PPM Monitoring and Benchmarking (7 Messages)
Pre-bake (5 Messages)
Process for Vias in Lands (7 Messages)
PWB MATERIALS, DESIGNS AND TECHNOLOGY (8 Messages)
QFP Solder Pad Shorts (6 Messages)
QFPs with 85% Tin 15% Lead plating (1 Message)
Qualifying SMT Adhesives for Space (4 Messages)
Racks plating up (1 Message)
Raw Card Track Repairs (6 Messages)
Recycling Component Reels (4 Messages)
Red plaque on Silver plated wire? (2 Messages)
Reflow Oven Sizes (10 Messages)
Reflow Process Profiling Methods (7 Messages)
Reflow Solder balls (4 Messages)
Resistor Networks of 0.5 mm Pitch (2 Messages)
Resistor networks on back plane: why use socket? (2 Messages)
RF "Black Magic", why do vias need to be beneath compone nts? (3 Messages)
RF "Black Magic", why do vias need to be beneath components? (1 Message)
Rough PTH barrel walls in ENIG plated PCB... (9 Messages)
Ruggedizing Assemblies... (4 Messages)
Rusty (9 Messages)
Seeking info on replacement for IP Alcohol which is no l onger allowed for cleaning of electronics in California (2 Messages)
Seeking info on replacement for IP Alcohol which is no longer allowe... (2 Messages)
Seeking info on replacement for IP Alcohol which is no longer allowed for cleaning of electronics in California (1 Message)
Seeking info on replacement for IP Alcohol which is no longerallowed for cleaning of electronics in California (6 Messages)
Seeking info on replacement for IP Alcohol which is nolongerallowed for cleaning of electronics in California (1 Message)
Separation of DIN connector (1 Message)
Silicones in Printed Wiring Board Assembly (3 Messages)
SMD and Flex Circuits (2 Messages)
solder fountains (8 Messages)
Solder mask outgassing (1 Message)
Solder Resist and QFP's (4 Messages)
Solder spikes and icicling (3 Messages)
Solder temperature question (4 Messages)
solderability (5 Messages)
Soldering wires to PWB with SMT Reflow process (4 Messages)
Spacing between 0805s (3 Messages)
Spacing between board to board that has mouse/rat bite d esign... (1 Message)
Spacing between board to board that has mouse/rat bite design... (2 Messages)
Specific Heats (1 Message)
SSD by Mask Technology - Anybody using it? (2 Messages)
SSOP to SOIC adaptors... (2 Messages)
Stencil Reductions (3 Messages)
Storage of moisture sensitive components (4 Messages)
STRIPPING MAGNET WIRE (5 Messages)
Tape splicing tool recommendations (4 Messages)
TechNet Digest - 18 Nov 2001 to 19 Nov 2001 - Special issue (#2001-713) (3 Messages)
test e-mail (2 Messages)
Tg of FR-4 (3 Messages)
Thanks Everyone: Re: [TN] Looking for Information (1 Message)
Thanks you (1 Message)
Thermal Capacity (3 Messages)
thermistors (2 Messages)
Thick PCBs (3 Messages)
this is a test (1 Message)
University web page (1 Message)
Unsubscribe (3 Messages)
Void in capacitor (2 Messages)
Wave soldeing jig thickness (7 Messages)
Wave Solder Profiling (5 Messages)
Wave soldering jig thickness (1 Message)
WaveSolder Process Monitoring Tools (4 Messages)
Which standards do apply for civil aircrafts ? (1 Message)
[LF] US lead free logo TV Ad (1 Message)

Subject Sorted by Subject, Most Recent First

From

Date
New Thread (none)
(none)
Peter Barton
Thu, 29 Nov 2001 11:35:00 +0000
New Thread (VIRUS ALERT!!!) [TN] O. MATERIALS. TO : VALUED ASSOCIATES.
Re: (VIRUS ALERT!!!) [TN] O. MATERIALS. TO : VALUED ASSOCIATES.
Stephen R. Gregory
Tue, 20 Nov 2001 11:00:56 EST
Re: (VIRUS ALERT!!!) [TN] O. MATERIALS. TO : VALUED ASSOCIATES.
Anil Kher
Fri, 30 Nov 2001 15:52:05 +0530
New Thread (VIRUS ALERT!!!) [TN] O. MATERIALS. TO : VALUEDASSOCIATES.
Re: (VIRUS ALERT!!!) [TN] O. MATERIALS. TO : VALUEDASSOCIATES.
Eric Christison
Tue, 20 Nov 2001 16:44:25 +0000
Re: (VIRUS ALERT!!!) [TN] O. MATERIALS. TO : VALUEDASSOCIATES.
Mel Parrish
Tue, 20 Nov 2001 12:17:51 -0800
New Thread 0603 Components (Torque Value)
Re: 0603 Components (Torque Value)
Becerra Alejandro
Wed, 14 Nov 2001 13:27:36 -0500
New Thread 0603 Components.
0603 Components.
Stephen Owen
Wed, 14 Nov 2001 07:35:39 -0600
Re: 0603 Components.
Bill Raymond
Wed, 14 Nov 2001 08:56:12 -0500
Re: 0603 Components.
Earl Moon
Wed, 14 Nov 2001 08:04:40 -0600
Re: 0603 Components.
Paul
Wed, 14 Nov 2001 10:18:11 -0500
Re: 0603 Components.
Earl Moon
Wed, 14 Nov 2001 09:43:35 -0600
Re: 0603 Components.
Lush, Dorothy (FPTI)
Wed, 14 Nov 2001 08:35:23 -0800
Re: 0603 Components.
Jim Gleason
Wed, 14 Nov 2001 11:01:03 -0800
Re: 0603 Components.
Bill Raymond
Wed, 14 Nov 2001 12:06:35 -0500
Re: 0603 Components.
Steve Abrahamson
Wed, 14 Nov 2001 10:49:52 -0700
Re: 0603 Components.
Bob Willis
Wed, 14 Nov 2001 17:55:46 -0000
Re: 0603 Components.
d. terstegge
Thu, 15 Nov 2001 09:58:45 +0100
New Thread <No subject>
<No subject>
Fred Ellis
Fri, 2 Nov 2001 17:54:40 -0500
<No subject>
Gary Bremer
Tue, 27 Nov 2001 11:22:31 -0500
New Thread Acceptability of flex boards
Acceptability of flex boards
Bissonnette, Jean-Francois
Mon, 26 Nov 2001 15:49:12 -0500
Re: Acceptability of flex boards
Stephen R. Gregory
Mon, 26 Nov 2001 15:56:02 EST
New Thread Actuator Tabs falling off
Actuator Tabs falling off
Andre Leclair
Wed, 14 Nov 2001 07:47:21 -0600
Re: Actuator Tabs falling off
Kathy Kuhlow
Wed, 14 Nov 2001 08:08:41 -0600
Re: Actuator Tabs falling off
Andre Leclair
Thu, 15 Nov 2001 10:56:19 -0600
New Thread Adhesion problems of galvanic gold on electroless nickel gold
Adhesion problems of galvanic gold on electroless nickel gold
Heinz Mader
Wed, 28 Nov 2001 09:32:36 -0600
Re: Adhesion problems of galvanic gold on electroless nickel gold
Vandendolder, Ron
Wed, 28 Nov 2001 12:04:16 -0500
Re: Adhesion problems of galvanic gold on electroless nickel gold
<Rudy Sedlak>
Wed, 28 Nov 2001 15:51:07 EST
Re: Adhesion problems of galvanic gold on electroless nickel gold
Russell Burdick
Wed, 28 Nov 2001 19:24:21 -0700
Re: Adhesion problems of galvanic gold on electroless nickel gold
Heinz Mader
Thu, 29 Nov 2001 03:16:00 -0600
New Thread Adhesive Matrix
Adhesive Matrix
Earl Moon
Thu, 1 Nov 2001 11:48:38 -0600
Re: Adhesive Matrix
Jeff Ferry
Thu, 1 Nov 2001 13:37:32 -0500
Re: Adhesive Matrix
Earl Moon
Thu, 1 Nov 2001 12:51:49 -0600
New Thread ADHESIVES - PROCESSES, VOIDING, AND THERMAL EFFICIENCY
ADHESIVES - PROCESSES, VOIDING, AND THERMAL EFFICIENCY
Earl Moon
Mon, 5 Nov 2001 08:17:53 -0600
New Thread Aerospace PCB consultants
Aerospace PCB consultants
Kevin Stokes
Wed, 7 Nov 2001 11:15:28 -0500
Re: Aerospace PCB consultants
Sauer, Steven T.
Wed, 7 Nov 2001 11:37:23 -0500
Re: Aerospace PCB consultants
Earl Moon
Wed, 7 Nov 2001 10:00:29 -0800
Re: Aerospace PCB consultants
To My E-Mail Address
Wed, 7 Nov 2001 15:32:11 EST
New Thread Anita Sargent/Endicott/IBM is out of the office.
Anita Sargent/Endicott/IBM is out of the office.
Anita Sargent
Fri, 30 Nov 2001 09:47:03 -0500
New Thread another one bites the dust
another one bites the dust
Russell Burdick
Thu, 22 Nov 2001 12:12:01 -0700
New Thread Ansı/J-std-001
Ansı/J-std-001
sedat bayar
Fri, 9 Nov 2001 12:04:25 +0200
New Thread Ansi/J-std-001
Re: Ansi/J-std-001
Tom Newton
Fri, 9 Nov 2001 10:13:36 -0600
New Thread Antw: [TN] Blow holes in solder joints
Antw: [TN] Blow holes in solder joints
Guenter Grossmann
Thu, 1 Nov 2001 11:22:47 +0100
New Thread AOI AND STENCILS
AOI AND STENCILS
Earl Moon
Wed, 14 Nov 2001 10:00:15 -0600
New Thread Apologies
Apologies
Peter Barton
Thu, 29 Nov 2001 11:10:00 +0000
New Thread Aspect Ratio
Aspect Ratio
fullname
Tue, 13 Nov 2001 09:59:52 +0800
Re: Aspect Ratio
George Milad
Mon, 12 Nov 2001 22:54:51 EST
Re: Aspect Ratio
Denis Lefebvre
Mon, 12 Nov 2001 19:53:46 -0800
Re: Aspect Ratio
Earl Moon
Mon, 12 Nov 2001 21:58:18 -0600
Re: Aspect Ratio
Gary Ferrari
Tue, 13 Nov 2001 08:36:11 EST
Re: Aspect Ratio
Earl Moon
Tue, 13 Nov 2001 08:28:32 -0600
Re: Aspect Ratio
Yehuda Weisz
Tue, 13 Nov 2001 23:35:02 +0200
Re: Aspect Ratio
Werner Engelmaier
Wed, 14 Nov 2001 07:48:04 EST
Re: Aspect Ratio
Earl Moon
Wed, 14 Nov 2001 06:55:39 -0600
Re: Aspect Ratio
Goldman, Patricia J.
Wed, 14 Nov 2001 08:52:46 -0500
Re: Aspect Ratio
Earl Moon
Wed, 14 Nov 2001 08:08:24 -0600
Re: Aspect Ratio
Werner Engelmaier
Wed, 14 Nov 2001 20:29:54 EST
Re: Aspect Ratio
Werner Engelmaier
Wed, 14 Nov 2001 20:29:53 EST
New Thread Assembly and rework Temperatures.
Assembly and rework Temperatures.
Roger Hammond
Wed, 7 Nov 2001 22:45:42 +0000
Re: Assembly and rework Temperatures.
Jon Moore
Thu, 8 Nov 2001 11:35:40 EST
New Thread Autocad to Solidworks
FW: Autocad to Solidworks
Edward H. Uslar
Wed, 28 Nov 2001 15:33:45 -0500
Re: FW: Autocad to Solidworks
Bill Decray
Wed, 28 Nov 2001 15:44:07 -0500
New Thread AW: [TN] Actuator Tabs falling off
AW: [TN] Actuator Tabs falling off
Busko, Wolfgang
Wed, 14 Nov 2001 15:06:33 +0100
New Thread AW: [TN] AW: [TN] New Product Introduction checklist
AW: [TN] AW: [TN] New Product Introduction checklist
Busko, Wolfgang
Tue, 13 Nov 2001 15:58:15 +0100
Re: AW: [TN] AW: [TN] New Product Introduction checklist
Earl Moon
Tue, 13 Nov 2001 09:19:42 -0600
New Thread AW: [TN] BGA voids
AW: [TN] BGA voids
Busko, Wolfgang
Mon, 19 Nov 2001 10:45:36 +0100
Re: AW: [TN] BGA voids
Bob Willis
Mon, 19 Nov 2001 12:45:48 -0000
Re: AW: [TN] BGA voids
David Fish
Mon, 19 Nov 2001 11:26:31 -0800
Re: AW: [TN] BGA voids
Bob Willis
Mon, 19 Nov 2001 16:42:43 -0000
Re: AW: [TN] BGA voids
Brooks,Bill
Mon, 19 Nov 2001 08:47:52 -0800
Re: AW: [TN] BGA voids
Mel Parrish
Mon, 19 Nov 2001 11:42:56 -0800
New Thread AW: [TN] Blow holes in solder joints
AW: [TN] Blow holes in solder joints
Busko, Wolfgang
Thu, 1 Nov 2001 17:00:01 +0100
Re: AW: [TN] Blow holes in solder joints
Houston, Terri
Thu, 1 Nov 2001 09:31:23 -0700
Re: AW: [TN] Blow holes in solder joints
Steve Underwood
Thu, 1 Nov 2001 11:57:18 -0500
New Thread AW: [TN] Handling of moisture sensitive devices
AW: [TN] Handling of moisture sensitive devices
Busko, Wolfgang
Thu, 15 Nov 2001 14:50:57 +0100
New Thread AW: [TN] handling single parts
AW: [TN] handling single parts
Busko, Wolfgang
Mon, 19 Nov 2001 10:33:15 +0100
New Thread AW: [TN] New Product Introduction checklist
AW: [TN] New Product Introduction checklist
Busko, Wolfgang
Tue, 13 Nov 2001 15:03:15 +0100
Re: AW: [TN] New Product Introduction checklist
Earl Moon
Tue, 13 Nov 2001 08:24:49 -0600
New Thread AW: [TN] Resistor Networks of 0.5 mm Pitch
AW: [TN] Resistor Networks of 0.5 mm Pitch
Busko, Wolfgang
Thu, 15 Nov 2001 14:33:42 +0100
New Thread best finish for through hole boards
best finish for through hole boards
Peter Crain
Thu, 22 Nov 2001 15:56:26 -0600
best finish for through hole boards
Peter Crain
Thu, 22 Nov 2001 16:14:22 -0600
Re: best finish for through hole boards
Dougal Stewart
Fri, 23 Nov 2001 12:30:48 -0000
New Thread BGA bone of contention
BGA bone of contention
Tom Colby
Fri, 16 Nov 2001 15:46:52 -0500
Re: BGA bone of contention
<Peter George Duncan>
Mon, 19 Nov 2001 13:47:21 +0800
Re: BGA bone of contention
Eric Dawson
Mon, 19 Nov 2001 08:20:31 -0000
Re: BGA bone of contention
Tom Colby
Mon, 19 Nov 2001 12:42:22 -0500
Re: BGA bone of contention
Denis Lefebvre
Mon, 19 Nov 2001 10:22:56 -0800
Re: BGA bone of contention
Joseph H. Smith
Tue, 20 Nov 2001 10:16:33 +0800
Re: BGA bone of contention
Denis Lefebvre
Tue, 20 Nov 2001 06:38:32 -0800
New Thread BGA long term storage?
BGA long term storage?
Graham Collins
Mon, 26 Nov 2001 10:07:06 -0500
Re: BGA long term storage?
d. terstegge
Mon, 26 Nov 2001 16:31:35 +0100
Re: BGA long term storage?
Brad Saunders
Mon, 26 Nov 2001 11:40:13 EST
Re: BGA long term storage?
David Douthit
Mon, 26 Nov 2001 12:51:02 -0700
Re: BGA long term storage?
<>
Mon, 26 Nov 2001 14:11:57 -0600
Re: BGA long term storage?
Graham Collins
Tue, 27 Nov 2001 07:02:57 -0500
Re: BGA long term storage?
d. terstegge
Wed, 28 Nov 2001 12:08:29 +0100
Re: BGA long term storage?
Francois Monette
Wed, 28 Nov 2001 10:05:16 -0500
Re: BGA long term storage?
<Peter George Duncan>
Thu, 29 Nov 2001 07:47:57 +0800
New Thread BGA rework
BGA rework
Vaishnav, Bankim
Wed, 7 Nov 2001 15:51:03 -0500
Re: BGA rework
Earl Moon
Wed, 7 Nov 2001 15:07:27 -0600
Re: BGA rework
Carroll, George
Thu, 8 Nov 2001 09:18:07 -0500
Re: BGA rework
Earl Moon
Thu, 8 Nov 2001 08:40:26 -0600
New Thread BGA rework - part removal profile
BGA rework - part removal profile
Andrew Chansler
Wed, 7 Nov 2001 15:58:39 -0600
Re: BGA rework - part removal profile
David Fish
Wed, 7 Nov 2001 17:21:07 -0800
Re: BGA rework - part removal profile
Kathy Kuhlow
Wed, 7 Nov 2001 16:57:45 -0600
Re: BGA rework - part removal profile
Guy Ramsey
Thu, 8 Nov 2001 09:17:29 -0500
New Thread BGA Via's to tent or cover or not?
BGA Via's to tent or cover or not?
<>
Fri, 9 Nov 2001 14:23:17 -0600
Re: BGA Via's to tent or cover or not?
Houston, Terri
Fri, 9 Nov 2001 14:46:05 -0600
Re: BGA Via's to tent or cover or not?
<Peter George Duncan>
Mon, 12 Nov 2001 11:10:12 +0800
Re: BGA Via's to tent or cover or not?
d. terstegge
Mon, 12 Nov 2001 09:16:25 +0100
New Thread BGA voids
BGA voids
Peter Lee
Fri, 16 Nov 2001 00:25:07 -0800
Re: BGA voids
Joseph H. Smith
Fri, 16 Nov 2001 16:34:44 +0800
Re: BGA voids
<Peter George Duncan>
Fri, 16 Nov 2001 16:52:53 +0800
Re: BGA voids
Bob Willis
Fri, 16 Nov 2001 17:58:30 -0000
Re: BGA voids
Peter Lee
Mon, 19 Nov 2001 22:29:55 -0800
Re: BGA voids
Bob Willis
Tue, 20 Nov 2001 07:09:51 -0000
Re: BGA voids
<Peter George Duncan>
Tue, 20 Nov 2001 17:03:48 +0800
Re: BGA voids
Bob Willis
Tue, 20 Nov 2001 10:13:41 -0000
New Thread BGA's in design
BGA's in design
Genny Gibbard
Tue, 6 Nov 2001 09:24:37 -0600
Re: BGA's in design
Earl Moon
Tue, 6 Nov 2001 10:40:22 -0600
Re: BGA's in design
Debbie Goodwin
Tue, 6 Nov 2001 10:05:22 -0800
Re: BGA's in design
Earl Moon
Tue, 6 Nov 2001 12:14:09 -0600
Re: BGA's in design
Ryan Grant
Tue, 6 Nov 2001 13:11:50 -0700
Re: BGA's in design
Genny Gibbard
Tue, 6 Nov 2001 16:15:47 -0600
Re: BGA's in design
Ryan Grant
Tue, 6 Nov 2001 17:06:06 -0700
Re: BGA's in design
<Peter George Duncan>
Wed, 7 Nov 2001 08:11:40 +0800
Re: BGA's in design
David Fish
Tue, 6 Nov 2001 22:02:36 -0800
Re: BGA's in design
Earl Moon
Wed, 7 Nov 2001 03:24:09 -0600
Re: BGA's in design
Rick Thompson
Wed, 7 Nov 2001 07:52:31 -0800
New Thread Blind via hole - PTH Specification
Blind via hole - PTH Specification
Ervin Weisz
Wed, 7 Nov 2001 13:18:21 -0800
Re: Blind via hole - PTH Specification
Earl Moon
Wed, 7 Nov 2001 15:42:56 -0600
Re: Blind via hole - PTH Specification
Earl Moon
Thu, 8 Nov 2001 04:44:14 -0600
Re: Blind via hole - PTH Specification
Earl Moon
Thu, 8 Nov 2001 08:36:04 -0600
Re: Blind via hole - PTH Specification
Ervin Weisz
Fri, 9 Nov 2001 06:12:04 -0800
New Thread Blow holes in solder joints
Blow holes in solder joints
PL
Wed, 31 Oct 2001 22:49:32 -0800
Re: Blow holes in solder joints
pratap singh
Thu, 1 Nov 2001 08:59:36 -0600
Blow holes in solder joints
Ivan Barrios
Thu, 1 Nov 2001 14:19:17 -0700
Re: Blow holes in solder joints
Kathy Kuhlow
Fri, 2 Nov 2001 08:48:33 -0600
New Thread board dunked in wave solder
board dunked in wave solder
Lou Hart
Thu, 29 Nov 2001 18:39:56 -0500
Re: board dunked in wave solder
<Peter George Duncan>
Fri, 30 Nov 2001 08:29:33 +0800
Re: board dunked in wave solder
Earl Moon
Thu, 29 Nov 2001 18:32:12 -0600
Re: board dunked in wave solder
Stephen R. Gregory
Thu, 29 Nov 2001 19:41:45 EST
Re: board dunked in wave solder
Crepeau, Phil
Thu, 29 Nov 2001 17:05:42 -0800
Re: board dunked in wave solder
Graham Collins
Fri, 30 Nov 2001 06:53:12 -0500
Re: board dunked in wave solder
Kathy Kuhlow
Fri, 30 Nov 2001 08:22:00 -0600
Re: board dunked in wave solder
Jon Moore
Fri, 30 Nov 2001 10:15:56 EST
New Thread Board Warp
Board Warp
<Peter George Duncan>
Fri, 16 Nov 2001 10:11:16 +0800
Re: Board Warp
Zhu, Xiang
Fri, 16 Nov 2001 10:32:05 +0800
Re: Board Warp
Earl Moon
Thu, 15 Nov 2001 21:11:36 -0600
Re: Board Warp
Jeff Ferry
Fri, 16 Nov 2001 08:53:36 -0500
Re: Board Warp
Earl Moon
Fri, 16 Nov 2001 08:33:17 -0600
Re: Board Warp
Hinners Hans M Civ WRALC/LUGE
Fri, 16 Nov 2001 16:33:02 -0500
Re: Board Warp
<Peter George Duncan>
Mon, 19 Nov 2001 10:49:56 +0800
Re: Board Warp
<Peter George Duncan>
Mon, 19 Nov 2001 13:54:51 +0800
Re: Board Warp
Jeff Ferry
Tue, 20 Nov 2001 09:54:23 -0500
Re: Board Warp
<Peter George Duncan>
Wed, 21 Nov 2001 08:06:07 +0800
New Thread Board Warpage/CEM-1 Material
Board Warpage/CEM-1 Material
S. Miller
Fri, 16 Nov 2001 08:04:41 EST
New Thread Book on PCI, compact PCI and PMC standards
Book on PCI, compact PCI and PMC standards
Ken Patel
Thu, 1 Nov 2001 09:14:37 -0800
Re: Book on PCI, compact PCI and PMC standards
Stephen R. Gregory
Thu, 1 Nov 2001 13:50:00 EST
Re: Book on PCI, compact PCI and PMC standards
Ken Patel
Mon, 5 Nov 2001 15:01:42 -0800
New Thread Buried Capacitance - unlicensed
Buried Capacitance - unlicensed
Mirka Halas
Fri, 2 Nov 2001 08:46:50 -0500
Re: Buried Capacitance - unlicensed
Mason Hu
Fri, 2 Nov 2001 13:01:44 -0600
Re: Buried Capacitance - unlicensed
Bill Decray
Fri, 2 Nov 2001 15:40:20 -0500
Re: Buried Capacitance - unlicensed
Anselmo, John
Fri, 2 Nov 2001 17:02:05 -0500
Re: Buried Capacitance - unlicensed
Earl Moon
Fri, 2 Nov 2001 16:11:09 -0600
Re: Buried Capacitance - unlicensed
Sklenar Vit (RBAU-EB/MGE4)
Fri, 9 Nov 2001 11:56:27 +1100
Re: Buried Capacitance - unlicensed
Brad Saunders
Mon, 26 Nov 2001 12:18:02 EST
New Thread Cab Maestro 2M blades
Cab Maestro 2M blades
Peter Wong
Fri, 16 Nov 2001 11:38:24 -0800
Re: Cab Maestro 2M blades
Harinder Jassal
Fri, 16 Nov 2001 15:07:13 -0800
Re: Cab Maestro 2M blades
Elensky, Richard
Fri, 16 Nov 2001 17:05:24 -0800
New Thread CCGA's, the good, the bad, and the ugly...
CCGA's, the good, the bad, and the ugly...
Stephen R. Gregory
Mon, 19 Nov 2001 19:22:55 EST
Re: CCGA's, the good, the bad, and the ugly...
Graham Collins
Tue, 20 Nov 2001 06:45:05 -0500
Re: CCGA's, the good, the bad, and the ugly...
Tempea, Ioan
Tue, 20 Nov 2001 08:49:48 -0500
Re: CCGA's, the good, the bad, and the ugly...
David Fish
Tue, 20 Nov 2001 11:06:23 -0800
Re: CCGA's, the good, the bad, and the ugly...
Earl Moon
Wed, 21 Nov 2001 15:32:54 -0600
New Thread Circuit Repair Facility
Circuit Repair Facility
Jan Satterfield
Mon, 19 Nov 2001 15:41:07 -0700
Re: Circuit Repair Facility
David North
Mon, 19 Nov 2001 15:17:05 -0800
Re: Circuit Repair Facility
Stephen R. Gregory
Mon, 19 Nov 2001 18:34:36 EST
Re: Circuit Repair Facility
Jeff Ferry
Tue, 20 Nov 2001 09:45:29 -0500
Re: Circuit Repair Facility
Neda Thrash
Tue, 20 Nov 2001 12:03:33 -0600
New Thread Cleaning paste when misaligned.
Re: Cleaning paste when misaligned.
Bill Schreiber
Thu, 1 Nov 2001 16:16:04 -0600
New Thread Color additives for conformal coat
Color additives for conformal coat
Stephen S. Schiera
Thu, 29 Nov 2001 09:29:00 -0600
Re: Color additives for conformal coat
Graham Naisbitt
Thu, 29 Nov 2001 18:20:19 -0000
Re: Color additives for conformal coat
Stephen S. Schiera
Fri, 30 Nov 2001 12:46:28 -0600
Re: Color additives for conformal coat
Graham Naisbitt
Fri, 30 Nov 2001 19:51:35 -0000
Re: Color additives for conformal coat
Hinners Hans M Civ WRALC/LUGE
Fri, 30 Nov 2001 15:45:11 -0500
New Thread Component Area Usage - Reality Check
Component Area Usage - Reality Check
David Schaefer
Wed, 28 Nov 2001 11:19:28 -0500
Re: Component Area Usage - Reality Check
Brooks,Bill
Wed, 28 Nov 2001 08:58:15 -0800
New Thread Component Charactristics
Component Charactristics
Werner Engelmaier
Thu, 15 Nov 2001 19:23:38 EST
New Thread Component Scrap Rates
Component Scrap Rates
Brad Mecham
Thu, 1 Nov 2001 10:06:15 -0600
Re: Component Scrap Rates
Chris Murphy
Fri, 2 Nov 2001 10:58:55 +1300
New Thread Conformal Coat House
Conformal Coat House
Pelchat, Janice
Fri, 30 Nov 2001 07:47:35 -0600
New Thread conformal coating
conformal coating
Marsico, James
Thu, 15 Nov 2001 07:30:15 -0500
Re: conformal coating
Graham Naisbitt
Sat, 17 Nov 2001 23:02:00 -0000
New Thread Conformal Coating to IPC Class 3
Conformal Coating to IPC Class 3
Mike Manwell
Thu, 15 Nov 2001 18:15:13 -0600
Re: Conformal Coating to IPC Class 3
<>
Fri, 16 Nov 2001 07:52:19 -0600
Re: Conformal Coating to IPC Class 3
Graham Naisbitt
Fri, 16 Nov 2001 16:45:31 -0000
Re: Conformal Coating to IPC Class 3
David Douthit
Fri, 16 Nov 2001 13:02:35 -0700
New Thread Copper Invar Copper and BGA's
Re: Copper Invar Copper and BGA's
Brad Saunders
Mon, 26 Nov 2001 12:29:09 EST
Re: Copper Invar Copper and BGA's
Stephen R. Gregory
Mon, 26 Nov 2001 12:46:51 EST
New Thread cracked flashmemory
cracked flashmemory
Lon Weffers
Fri, 2 Nov 2001 12:28:44 +0100
New Thread Crystal Filters
Crystal Filters
Michael Bell
Mon, 5 Nov 2001 12:29:22 +1300
Re: Crystal Filters
Wildes, Earl
Mon, 5 Nov 2001 07:20:11 -0800
New Thread Cu CL etcher
Re: Cu CL etcher
Smith, Russell (US LA)
Wed, 28 Nov 2001 10:14:33 -0800
Re: Cu CL etcher
Mark Mazzoli
Wed, 28 Nov 2001 10:54:40 -0800
Re: Cu CL etcher
<Rudy Sedlak>
Wed, 28 Nov 2001 15:56:25 EST
Re: Cu CL etcher
Hinners Hans M Civ WRALC/LUGE
Thu, 29 Nov 2001 08:43:16 -0500
New Thread CuCl etch normality
Re: CuCl etch normality
Smith, Russell (US LA)
Mon, 26 Nov 2001 14:54:49 -0800
Re: CuCl etch normality
Mark Mazzoli
Mon, 26 Nov 2001 15:48:13 -0800
Re: CuCl etch normality
<Rudy Sedlak>
Mon, 26 Nov 2001 20:31:46 EST
New Thread Dave Hoover Where Are You?
Dave Hoover Where Are You?
<Rudy Sedlak>
Tue, 13 Nov 2001 17:13:11 EST
Re: Dave Hoover Where Are You?
Barbara Burcham
Tue, 13 Nov 2001 16:23:10 -0600
Re: Dave Hoover Where Are You?
<>
Tue, 13 Nov 2001 21:01:50 EST
New Thread Dielectric constant vs degree of cure , FR4
Dielectric constant vs degree of cure , FR4
tech
Thu, 29 Nov 2001 10:00:45 -0500
Re: Dielectric constant vs degree of cure , FR4
Earl Moon
Thu, 29 Nov 2001 09:09:35 -0600
Re: Dielectric constant vs degree of cure , FR4
Brad Saunders
Thu, 29 Nov 2001 11:39:48 EST
Re: Dielectric constant vs degree of cure , FR4
Dougal Stewart
Thu, 29 Nov 2001 16:53:51 -0000
Re: Dielectric constant vs degree of cure , FR4
Earl Moon
Thu, 29 Nov 2001 11:37:11 -0600
New Thread Differential impedance
Fw: Differential impedance
Scott Westheimer
Fri, 30 Nov 2001 09:52:02 -0500
Re: Fw: Differential impedance
Earl Moon
Fri, 30 Nov 2001 09:06:40 -0600
Re: Fw: Differential impedance
Carl VanWormer
Fri, 30 Nov 2001 07:53:30 -0800
Re: Fw: Differential impedance
Denis Lefebvre
Fri, 30 Nov 2001 08:24:02 -0800
Re: Fw: Differential impedance
Earl Moon
Fri, 30 Nov 2001 10:39:09 -0600
Re: Fw: Differential impedance
Martyn Gaudion
Fri, 30 Nov 2001 17:39:21 +0000
Re: Fw: Differential impedance
Earl Moon
Fri, 30 Nov 2001 11:30:13 -0600
New Thread DLT board repair
Re: DLT board repair
Stephen R. Gregory
Fri, 2 Nov 2001 18:29:51 EST
Re: DLT board repair
Fred Ellis
Mon, 5 Nov 2001 09:37:32 -0500
New Thread E-Business auctions for EMS providers...
E-Business auctions for EMS providers...
Stephen R. Gregory
Fri, 16 Nov 2001 21:41:03 EST
Re: E-Business auctions for EMS providers...
Lou Hart
Sat, 17 Nov 2001 08:43:12 -0500
Re: E-Business auctions for EMS providers...
Charles McMahon
Sat, 17 Nov 2001 09:07:32 -0500
Re: E-Business auctions for EMS providers...
Earl Moon
Sat, 17 Nov 2001 11:02:45 -0600
Re: E-Business auctions for EMS providers...
Dougal Stewart
Sat, 17 Nov 2001 17:07:55 -0000
Re: E-Business auctions for EMS providers...
Kathy Kuhlow
Mon, 19 Nov 2001 08:15:46 -0600
New Thread E-mail Address Changed
E-mail Address Changed
Carl Ray
Tue, 27 Nov 2001 15:04:36 -0600
Re: E-mail Address Changed
Keach Sasamori
Tue, 27 Nov 2001 17:09:54 -0600
New Thread Effect of BGA rework to surrounding components
Effect of BGA rework to surrounding components
JASON CROSS
Mon, 5 Nov 2001 09:24:24 -0500
Re: Effect of BGA rework to surrounding components
Graham Collins
Mon, 5 Nov 2001 09:40:51 -0500
Re: Effect of BGA rework to surrounding components
Earl Moon
Mon, 5 Nov 2001 09:23:17 -0600
Re: Effect of BGA rework to surrounding components
Earl Moon
Mon, 5 Nov 2001 09:24:21 -0600
Re: Effect of BGA rework to surrounding components
Furrow, Robert Gordon (Bob)
Mon, 5 Nov 2001 10:49:23 -0500
New Thread Electrically Conductive Epoxies
Electrically Conductive Epoxies
Michael Bell
Tue, 6 Nov 2001 13:39:40 +1300
Re: Electrically Conductive Epoxies
Phil Nutting
Tue, 6 Nov 2001 08:34:33 -0500
Re: Electrically Conductive Epoxies
Misner, Bruce
Tue, 6 Nov 2001 06:45:25 -0700
New Thread Electrovert Minipak 300
Electrovert Minipak 300
Michael Bell
Thu, 8 Nov 2001 08:22:10 +1300
Re: Electrovert Minipak 300
Elensky, Richard
Wed, 7 Nov 2001 11:52:39 -0800
Re: Electrovert Minipak 300
Earl Moon
Wed, 7 Nov 2001 13:47:09 -0600
Re: Electrovert Minipak 300
Earl Moon
Wed, 7 Nov 2001 13:55:56 -0600
Re: Electrovert Minipak 300
Kathy Kuhlow
Wed, 7 Nov 2001 16:12:23 -0600
New Thread ENIG-Black Pad
ENIG-Black Pad
Zhu, Xiang
Thu, 15 Nov 2001 13:17:39 +0800
Re: ENIG-Black Pad
Earl Moon
Thu, 15 Nov 2001 00:28:14 -0600
Re: ENIG-Black Pad
Bob Willis
Thu, 15 Nov 2001 07:06:08 -0000
Re: ENIG-Black Pad
<Peter George Duncan>
Thu, 15 Nov 2001 16:43:36 +0800
Re: ENIG-Black Pad
Dougal Stewart
Thu, 15 Nov 2001 17:33:09 -0000
New Thread Fiducial Markings - do they mean anything?
Re: Fiducial Markings - do they mean anything?
Peter Barton
Thu, 29 Nov 2001 10:42:00 +0000
New Thread Flex Delamination
Flex Delamination
Andy Magee
Thu, 1 Nov 2001 14:58:28 -0500
Re: Flex Delamination
d. terstegge
Fri, 2 Nov 2001 08:20:09 +0100
New Thread Flexible PC Board
Flexible PC Board
Scott R. Madans
Wed, 28 Nov 2001 17:47:33 -0800
Re: Flexible PC Board
Chuck Brummer
Thu, 29 Nov 2001 07:58:24 -0800
Re: Flexible PC Board
Scott R. Madans
Thu, 29 Nov 2001 08:08:58 -0800
Re: Flexible PC Board
Chuck Brummer
Thu, 29 Nov 2001 08:25:02 -0800
Re: Flexible PC Board
Scott R. Madans
Thu, 29 Nov 2001 08:50:36 -0800
Re: Flexible PC Board
Steve Kelly
Fri, 30 Nov 2001 09:01:31 -0500
New Thread Formula?
Formula?
Golembiewski, Ray
Mon, 12 Nov 2001 14:33:33 -0500
Re: Formula?
To My E-Mail Address
Mon, 12 Nov 2001 15:04:17 EST
Re: Formula?
Ahne Oosterhof
Mon, 12 Nov 2001 12:16:53 -0800
Re: Formula?
Bill Raymond
Mon, 12 Nov 2001 15:16:04 -0500
Re: Formula?
Ryan Grant
Mon, 12 Nov 2001 13:33:50 -0700
Re: Formula?
Steve Telgen
Mon, 12 Nov 2001 15:45:21 -0500
Re: Formula?
Eric Christison
Tue, 13 Nov 2001 09:26:37 +0000
Re: Formula?
Rummy Makmur
Tue, 13 Nov 2001 06:11:46 -0600
Re: Formula?
Edward Szpruch
Tue, 13 Nov 2001 14:48:34 +0200
Re: Formula?
Mcmaster, Michael
Tue, 13 Nov 2001 12:40:31 -0800
New Thread FTIR Cards
FTIR Cards
<>
Thu, 29 Nov 2001 10:51:00 -0600
Re: FTIR Cards
Hans Shin
Thu, 29 Nov 2001 09:10:26 -0800
Re: FTIR Cards
Crepeau, Phil
Thu, 29 Nov 2001 10:52:07 -0800
Re: FTIR Cards
Hans Shin
Thu, 29 Nov 2001 12:01:02 -0800
New Thread Glue stencils
Glue stencils
Danny W. Harkins
Thu, 15 Nov 2001 15:00:51 -0500
New Thread Gold Embrittlement
Gold Embrittlement
JASON CROSS
Wed, 7 Nov 2001 17:27:54 -0500
Re: Gold Embrittlement
David Douthit
Wed, 7 Nov 2001 18:17:43 -0700
Re: Gold Embrittlement
<Peter George Duncan>
Thu, 8 Nov 2001 10:28:37 +0800
Re: Gold Embrittlement
David Hillman
Thu, 8 Nov 2001 08:20:15 -0600
New Thread Gold removal on ceramic chip carrier...
Gold removal on ceramic chip carrier...
Stephen R. Gregory
Fri, 9 Nov 2001 16:11:44 EST
Re: Gold removal on ceramic chip carrier...
Sauer, Steven T.
Fri, 9 Nov 2001 16:52:22 -0500
Re: Gold removal on ceramic chip carrier...
Stephen R. Gregory
Fri, 9 Nov 2001 19:55:17 EST
Re: Gold removal on ceramic chip carrier...
Don Vischulis
Fri, 9 Nov 2001 19:48:50 -0600
Re: Gold removal on ceramic chip carrier...
Stephen R. Gregory
Fri, 9 Nov 2001 21:14:42 EST
New Thread Good SPC software
Good SPC software
peter lee
Fri, 2 Nov 2001 08:48:54 -0800
Re: Good SPC software
d. terstegge
Mon, 5 Nov 2001 09:14:38 +0100
Re: Good SPC software
Elensky, Richard
Mon, 5 Nov 2001 10:01:13 -0800
Re: Good SPC software
Michael Bell
Tue, 6 Nov 2001 07:55:00 +1300
New Thread grounds....
grounds....
John Brewer
Wed, 21 Nov 2001 08:13:16 -0500
New Thread Handling of moisture sensitive devices
Handling of moisture sensitive devices
Grant Emandien
Thu, 15 Nov 2001 11:15:47 +0200
Re: Handling of moisture sensitive devices
<Peter George Duncan>
Thu, 15 Nov 2001 19:01:10 +0800
Re: Handling of moisture sensitive devices
Wildes, Earl
Thu, 15 Nov 2001 07:21:29 -0800
Re: Handling of moisture sensitive devices
Francois Monette
Thu, 15 Nov 2001 22:53:48 -0500
Re: Handling of moisture sensitive devices
Earl Moon
Thu, 15 Nov 2001 21:51:11 -0600
New Thread handling single parts
handling single parts
Wildes, Earl
Fri, 16 Nov 2001 07:53:22 -0800
Re: handling single parts
Eric Dawson
Mon, 19 Nov 2001 07:50:44 -0000
New Thread handling surface mount components
handling surface mount components
Wildes, Earl
Fri, 2 Nov 2001 10:36:06 -0800
New Thread HELP <=> PCB vs. High Vacuum <=> HELP
HELP <=> PCB vs. High Vacuum <=> HELP
Sasha Miladinovic
Wed, 14 Nov 2001 06:33:24 -0600
Re: HELP <=> PCB vs. High Vacuum <=> HELP
Earl Moon
Wed, 14 Nov 2001 07:57:43 -0600
Re: HELP <=> PCB vs. High Vacuum <=> HELP
Brad Saunders
Wed, 14 Nov 2001 11:04:25 EST
Re: HELP <=> PCB vs. High Vacuum <=> HELP
Sasha Miladinovic
Wed, 21 Nov 2001 17:00:51 +0100
Re: HELP <=> PCB vs. High Vacuum <=> HELP
Brad Saunders
Sat, 24 Nov 2001 07:36:52 EST
Re: HELP <=> PCB vs. High Vacuum <=> HELP
Seth Goodman
Sun, 25 Nov 2001 00:57:42 -0600
Re: HELP <=> PCB vs. High Vacuum <=> HELP
Sasha Miladinovic
Mon, 26 Nov 2001 16:00:47 +0100
New Thread High Tg FR-4
High Tg FR-4
Graham Collins
Thu, 8 Nov 2001 13:37:43 -0500
Re: High Tg FR-4
<>
Thu, 8 Nov 2001 13:04:09 -0600
Re: High Tg FR-4
Hinners Hans M Civ WRALC/LUGE
Thu, 8 Nov 2001 14:11:19 -0500
Re: High Tg FR-4
Earl Moon
Thu, 8 Nov 2001 13:10:58 -0600
Re: High Tg FR-4
Whittaker, Dewey E. (AZ75)
Thu, 8 Nov 2001 14:16:41 -0700
Re: High Tg FR-4
Earl Moon
Thu, 8 Nov 2001 15:35:45 -0600
Re: High Tg FR-4
d. terstegge
Fri, 9 Nov 2001 10:50:38 +0100
Re: High Tg FR-4
Earl Moon
Fri, 9 Nov 2001 03:58:15 -0600
Re: High Tg FR-4
Hinners Hans M Civ WRALC/LUGE
Fri, 9 Nov 2001 15:39:57 -0500
Re: High Tg FR-4
Larry Tawyea
Fri, 9 Nov 2001 16:04:49 EST
Re: High Tg FR-4
Earl Moon
Fri, 9 Nov 2001 15:19:29 -0600
Re: High Tg FR-4
Werner Engelmaier
Sat, 10 Nov 2001 12:15:58 EST
Re: High Tg FR-4
Earl Moon
Sat, 10 Nov 2001 12:49:02 -0600
Re: High Tg FR-4
Earl Moon
Mon, 12 Nov 2001 07:18:23 -0600
New Thread Hot Oil
Hot Oil
Genny Gibbard
Fri, 9 Nov 2001 11:27:27 -0600
Re: Hot Oil
Carroll, George
Fri, 9 Nov 2001 12:59:56 -0500
Re: Hot Oil
Earl Moon
Fri, 9 Nov 2001 11:53:27 -0600
Re: Hot Oil
Rick Howieson
Fri, 9 Nov 2001 11:08:25 -0700
Re: Hot Oil
Earl Moon
Fri, 9 Nov 2001 12:08:51 -0600
Re: Hot Oil
Earl Moon
Fri, 9 Nov 2001 12:15:39 -0600
Re: Hot Oil
Anderson, Greg (IndSys, GEFanuc, NA)
Fri, 9 Nov 2001 13:20:24 -0500
Re: Hot Oil
Leo Lambert
Fri, 9 Nov 2001 13:29:23 -0500
Re: Hot Oil
Earl Moon
Fri, 9 Nov 2001 12:27:01 -0600
Re: Hot Oil
<Rudy Sedlak>
Fri, 9 Nov 2001 18:41:52 EST
Re: Hot Oil
Earl Moon
Fri, 9 Nov 2001 17:53:57 -0600
Re: Hot Oil
Don Vischulis
Fri, 9 Nov 2001 19:36:31 -0600
Re: Hot Oil
Brian Ellis
Sat, 10 Nov 2001 17:23:29 +0200
Re: Hot Oil
Earl Moon
Sat, 10 Nov 2001 10:11:45 -0600
Re: Hot Oil
<Peter George Duncan>
Mon, 12 Nov 2001 10:49:22 +0800
New Thread How to remove silk screen from the plated area
How to remove silk screen from the plated area
Ken Patel
Tue, 20 Nov 2001 09:11:49 -0800
Re: How to remove silk screen from the plated area
David Fish
Tue, 20 Nov 2001 15:28:45 -0800
New Thread Independant Board Analysis
Independant Board Analysis
Andre Leclair
Wed, 14 Nov 2001 07:55:20 -0600
New Thread Information about Double Reflow
Information about Double Reflow
Becerra Alejandro
Thu, 8 Nov 2001 18:51:50 -0500
Re: Information about Double Reflow
Jorge Rodriguez
Thu, 8 Nov 2001 17:27:11 -0700
Re: Information about Double Reflow
<Peter George Duncan>
Fri, 9 Nov 2001 09:53:22 +0800
New Thread Inner Layer Issues...
Inner Layer Issues...
Stephen R. Gregory
Thu, 8 Nov 2001 21:12:38 EST
Re: Inner Layer Issues...
Stephen R. Gregory
Thu, 8 Nov 2001 21:20:58 EST
Re: Inner Layer Issues...
Russell Burdick
Fri, 9 Nov 2001 10:27:44 -0700
Re: Inner Layer Issues...
Chuck Brummer
Fri, 9 Nov 2001 10:26:02 -0800
Re: Inner Layer Issues...
Edward Szpruch
Sun, 11 Nov 2001 12:09:55 +0200
New Thread Innerlayer shorts - predictions vs. reality
Re: Innerlayer shorts - predictions vs. reality
Hinners Hans M Civ WRALC/LUGE
Fri, 2 Nov 2001 17:10:21 -0500
New Thread Intermetallic Layers
Intermetallic Layers
Eric Dawson
Mon, 12 Nov 2001 13:49:56 -0000
Re: Intermetallic Layers
Brian Ellis
Mon, 12 Nov 2001 18:30:13 +0200
Re: Intermetallic Layers
David Hillman
Tue, 13 Nov 2001 11:24:49 -0600
Re: Intermetallic Layers
Wenger, George M.
Tue, 13 Nov 2001 13:07:22 -0500
Re: Intermetallic Layers
Crepeau, Phil
Tue, 13 Nov 2001 11:18:37 -0800
Re: Intermetallic Layers
Franck, George
Tue, 13 Nov 2001 14:19:36 -0500
Re: Intermetallic Layers
Eric Dawson
Wed, 14 Nov 2001 08:18:06 -0000
Re: Intermetallic Layers
Eric Dawson
Wed, 14 Nov 2001 08:59:20 -0000
Re: Intermetallic Layers
Ted Stern
Wed, 14 Nov 2001 14:05:15 -0600
Re: Intermetallic Layers
Furrow, Robert Gordon (Bob)
Wed, 14 Nov 2001 15:32:33 -0500
Re: Intermetallic Layers
David Hillman
Fri, 16 Nov 2001 12:17:40 -0600
New Thread ion chromatography
ion chromatography
Graham Collins
Mon, 19 Nov 2001 14:20:05 -0500
Re: ion chromatography
Mario Dion
Mon, 19 Nov 2001 14:46:28 -0500
Re: ion chromatography
Jon Moore
Mon, 19 Nov 2001 15:30:05 EST
New Thread IPC SM-782 on-line calculator
IPC SM-782 on-line calculator
Yu-Hung Shiau
Mon, 26 Nov 2001 16:53:25 -0600
Re: IPC SM-782 on-line calculator
Guy Ramsey
Tue, 27 Nov 2001 14:32:56 -0500
Re: IPC SM-782 on-line calculator
Gary Ferrari
Tue, 27 Nov 2001 15:02:29 EST
Re: IPC SM-782 on-line calculator
<Peter George Duncan>
Wed, 28 Nov 2001 12:25:36 +0800
New Thread IPC6014
IPC6014
Mark Hargreaves
Thu, 15 Nov 2001 15:42:28 -0500
Re: IPC6014
Roger M. Stoops
Thu, 15 Nov 2001 17:13:50 -0500
New Thread IPCDC Boston mtg 11-Dec, Current Carrying update
IPCDC Boston mtg 11-Dec, Current Carrying update
Jeff Seeger
Fri, 30 Nov 2001 15:52:49 -0500
New Thread Is X-RAY can damaged Flash IC i.e. imbedded program ?
Re: Is X-RAY can damaged Flash IC i.e. imbedded program ?
Hinners Hans M Civ WRALC/LUGE
Tue, 20 Nov 2001 08:46:05 -0500
New Thread Is X-RAY can damaged Flash IC i.e. imbeded program ?
Is X-RAY can damaged Flash IC i.e. imbeded program ?
Mario Dion
Mon, 19 Nov 2001 09:21:47 -0600
Re: Is X-RAY can damaged Flash IC i.e. imbeded program ?
<Peter George Duncan>
Tue, 20 Nov 2001 11:47:26 +0800
Re: Is X-RAY can damaged Flash IC i.e. imbeded program ?
Andre Leclair
Tue, 20 Nov 2001 07:22:16 -0600
Re: Is X-RAY can damaged Flash IC i.e. imbeded program ?
Andre Leclair
Tue, 20 Nov 2001 07:24:11 -0600
Re: Is X-RAY can damaged Flash IC i.e. imbeded program ?
Joseph Fjelstad
Tue, 20 Nov 2001 08:59:21 EST
Re: Is X-RAY can damaged Flash IC i.e. imbeded program ?
David Hillman
Wed, 21 Nov 2001 08:50:22 -0600
Re: Is X-RAY can damaged Flash IC i.e. imbeded program ?
Mario Dion
Wed, 21 Nov 2001 10:22:57 -0500
New Thread Isolation between connector pins
Isolation between connector pins
d. terstegge
Mon, 26 Nov 2001 16:45:47 +0100
Re: Isolation between connector pins
Brad Saunders
Mon, 26 Nov 2001 11:45:50 EST
Re: Isolation between connector pins
Ahne Oosterhof
Mon, 26 Nov 2001 11:18:06 -0800
Re: Isolation between connector pins
David Ricketts
Mon, 26 Nov 2001 12:11:06 -0800
Re: Isolation between connector pins
DUTTON Phil
Tue, 27 Nov 2001 10:29:31 +1100
Re: Isolation between connector pins
<Peter George Duncan>
Wed, 28 Nov 2001 08:31:25 +0800
New Thread Kick my butt if you wish
Kick my butt if you wish
Earl Moon
Thu, 15 Nov 2001 23:08:44 -0600
New Thread Kovar
Kovar
<>
Wed, 14 Nov 2001 11:14:56 EST
Re: Kovar
Earl Moon
Wed, 14 Nov 2001 10:32:59 -0600
Re: Kovar
Creswick, Steven
Wed, 14 Nov 2001 12:13:34 -0500
Re: Kovar
<>
Wed, 14 Nov 2001 12:20:07 EST
Re: Kovar
<Rudy Sedlak>
Wed, 14 Nov 2001 17:39:14 EST
Re: Kovar
<>
Wed, 14 Nov 2001 22:29:30 EST
Re: Kovar
Earl Moon
Thu, 15 Nov 2001 00:34:11 -0600
New Thread Kovar Etching
Re: Kovar Etching
<Rudy Sedlak>
Thu, 15 Nov 2001 10:57:33 EST
New Thread Land pattern for wave soldering
Re: Land pattern for wave soldering
Steve Owen
Thu, 8 Nov 2001 12:31:23 -0000
New Thread Land size for wave soldering
Land size for wave soldering
Patrick Lam
Fri, 16 Nov 2001 09:24:56 -0800
New Thread LLP Leadless LeadFrame Package
LLP Leadless LeadFrame Package
Lefebvre, Scott
Fri, 30 Nov 2001 13:34:37 -0600
Re: LLP Leadless LeadFrame Package
Brad Saunders
Fri, 30 Nov 2001 16:13:35 EST
New Thread Looking for a way to oxidized tin-lead plated component
Looking for a way to oxidized tin-lead plated component
Julien Bouchard
Mon, 5 Nov 2001 13:20:05 -0500
Re: Looking for a way to oxidized tin-lead plated component
Wildes, Earl
Mon, 5 Nov 2001 10:27:19 -0800
Re: Looking for a way to oxidized tin-lead plated component
Crepeau, Phil
Mon, 5 Nov 2001 11:43:14 -0800
Re: Looking for a way to oxidized tin-lead plated component
<Rudy Sedlak>
Mon, 5 Nov 2001 19:51:20 EST
Re: Looking for a way to oxidized tin-lead plated component
Brian Ellis
Tue, 6 Nov 2001 10:18:30 +0200
Re: Looking for a way to oxidized tin-lead plated component
David Hillman
Tue, 6 Nov 2001 08:36:21 -0600
New Thread Looking for Information
Looking for Information
David Hillman
Mon, 26 Nov 2001 16:57:25 -0600
Re: Looking for Information
Stephen R. Gregory
Mon, 26 Nov 2001 18:30:45 EST
Re: Looking for Information
Gaby Bogdan
Tue, 27 Nov 2001 08:35:02 +0200
Re: Looking for Information
David Fish
Tue, 27 Nov 2001 10:58:58 -0800
New Thread Manual Press for PEM PCB fastener
Manual Press for PEM PCB fastener
Peter Lee
Tue, 13 Nov 2001 23:46:16 -0800
Re: Manual Press for PEM PCB fastener
Phil Nutting
Wed, 14 Nov 2001 08:09:05 -0500
Re: Manual Press for PEM PCB fastener
McMullen, Kerry
Wed, 14 Nov 2001 08:18:19 -0500
Re: Manual Press for PEM PCB fastener
Jeff Ferry
Wed, 14 Nov 2001 09:16:08 -0500
Re: Manual Press for PEM PCB fastener
Jim Gleason
Wed, 14 Nov 2001 08:42:17 -0800
Re: Manual Press for PEM PCB fastener
Karl Sauter
Wed, 14 Nov 2001 07:55:29 -0800
Re: Manual Press for PEM PCB fastener
Peter Lee
Tue, 20 Nov 2001 23:51:05 -0800
Re: Manual Press for PEM PCB fastener
<Peter George Duncan>
Wed, 21 Nov 2001 17:35:19 +0800
Re: Manual Press for PEM PCB fastener
Eric Christison
Wed, 21 Nov 2001 10:14:57 +0000
Re: Manual Press for PEM PCB fastener
Phil Nutting
Wed, 21 Nov 2001 08:21:04 -0500
Re: Manual Press for PEM PCB fastener
Jim Gleason
Wed, 21 Nov 2001 09:39:05 -0800
New Thread mil spec info
mil spec info
Gerard O'Brien
Thu, 1 Nov 2001 14:29:40 -0500
Re: mil spec info
Stephen R. Gregory
Thu, 1 Nov 2001 15:02:14 EST
New Thread MIL-STD-883E, TM 2030 and facing in
MIL-STD-883E, TM 2030 and facing in
Earl Moon
Sat, 3 Nov 2001 07:22:00 -0600
New Thread Military PCB
Military PCB
Ken Bly
Wed, 7 Nov 2001 16:48:51 -0800
Re: Military PCB
Earl Moon
Thu, 8 Nov 2001 09:34:12 -0600
Re: Military PCB
Hinners Hans M Civ WRALC/LUGE
Thu, 8 Nov 2001 13:52:36 -0500
New Thread Moisture Sensitive Devices
Moisture Sensitive Devices
Carl Ray
Thu, 15 Nov 2001 09:37:07 -0600
Re: Moisture Sensitive Devices
Leo Lambert
Thu, 15 Nov 2001 11:02:13 -0500
Re: Moisture Sensitive Devices
<Peter George Duncan>
Fri, 16 Nov 2001 07:56:58 +0800
New Thread Need Help with 85-15 Altera QFPs
Need Help with 85-15 Altera QFPs
Jorge Rodriguez
Tue, 27 Nov 2001 15:17:09 -0700
Re: Need Help with 85-15 Altera QFPs
David Fish
Wed, 28 Nov 2001 13:33:16 -0800
Re: Need Help with 85-15 Altera QFPs
David Hillman
Wed, 28 Nov 2001 17:56:57 -0600
New Thread New Product Introduction checklist
New Product Introduction checklist
Peter Lee
Mon, 12 Nov 2001 04:04:44 -0800
Re: New Product Introduction checklist
Earl Moon
Mon, 12 Nov 2001 05:52:43 -0800
Re: New Product Introduction checklist
Earl Moon
Mon, 12 Nov 2001 07:09:14 -0600
Re: New Product Introduction checklist
D.Terstegge
Mon, 12 Nov 2001 20:03:54 +0100
Re: New Product Introduction checklist
Phil Nutting
Tue, 13 Nov 2001 08:38:43 -0500
Re: New Product Introduction checklist
<Dan Cavaliere>
Tue, 13 Nov 2001 08:42:06 -0500
Re: New Product Introduction checklist
Earl Moon
Tue, 13 Nov 2001 08:13:47 -0600
Re: New Product Introduction checklist
Kathy Kuhlow
Tue, 13 Nov 2001 08:50:48 -0600
Re: New Product Introduction checklist
Earl Moon
Tue, 13 Nov 2001 09:16:10 -0600
New Thread nitrogen purity
nitrogen purity
sedat bayar
Wed, 21 Nov 2001 14:38:26 +0200
Re: nitrogen purity
Earl Moon
Wed, 21 Nov 2001 15:24:30 -0600
New Thread No power on after underfill
No power on after underfill
Joseph H. Smith
Mon, 19 Nov 2001 15:48:35 +0800
Re: No power on after underfill
<Peter George Duncan>
Mon, 19 Nov 2001 18:27:10 +0800
Re: No power on after underfill
Joseph H. Smith
Tue, 20 Nov 2001 08:37:30 +0800
Re: No power on after underfill
Joseph H. Smith
Tue, 20 Nov 2001 08:58:32 +0800
Re: No power on after underfill
<Peter George Duncan>
Tue, 20 Nov 2001 13:40:45 +0800
Re: No power on after underfill
Joseph Fjelstad
Tue, 20 Nov 2001 08:32:54 EST
Re: No power on after underfill
Bob Willis
Tue, 20 Nov 2001 09:53:09 -0000
New Thread Non-wetting
Non-wetting
John Brown
Wed, 21 Nov 2001 08:54:35 +0000
Re: Non-wetting
<Peter George Duncan>
Wed, 21 Nov 2001 18:31:52 +0800
Re: Non-wetting
Guy Ramsey
Wed, 21 Nov 2001 07:24:40 -0500
Non-wetting
Busko, Wolfgang
Wed, 21 Nov 2001 13:36:07 +0100
New Thread O. MATERIALS. TO : VALUED ASSOCIATES.
O. MATERIALS. TO : VALUED ASSOCIATES.
Anil Kher
Tue, 20 Nov 2001 16:02:00 +0530
Re: O. MATERIALS. TO : VALUED ASSOCIATES.
Anil K. Singh
Tue, 20 Nov 2001 20:22:10 +0530
New Thread OA & LCCs
OA & LCCs
bbarr
Fri, 16 Nov 2001 10:17:03 -0500
New Thread oops
oops
Steve Underwood
Thu, 1 Nov 2001 12:01:54 -0500
New Thread Optical Component and SMT and PTH Assembly and repair
Optical Component and SMT and PTH Assembly and repair
Gus Morvillo
Fri, 9 Nov 2001 15:55:55 -0500
Re: Optical Component and SMT and PTH Assembly and repair
Earl Moon
Fri, 9 Nov 2001 16:08:08 -0600
Re: Optical Component and SMT and PTH Assembly and repair
Earl Moon
Fri, 9 Nov 2001 16:08:11 -0600
New Thread Organic Silver PCB's
Organic Silver PCB's
Michael Bell
Thu, 29 Nov 2001 07:59:57 +1300
Re: Organic Silver PCB's
Igor Bjekic
Wed, 28 Nov 2001 13:27:44 -0700
Re: Organic Silver PCB's
Igor Bjekic
Wed, 28 Nov 2001 13:28:49 -0700
Re: Organic Silver PCB's
David Hillman
Wed, 28 Nov 2001 17:50:51 -0600
Re: Organic Silver PCB's
<Rudy Sedlak>
Wed, 28 Nov 2001 19:56:39 EST
Re: Organic Silver PCB's
Atkinson, Neil
Thu, 29 Nov 2001 07:53:57 -0000
Re: Organic Silver PCB's
David Hillman
Thu, 29 Nov 2001 08:32:03 -0600
Re: Organic Silver PCB's
<Rudy Sedlak>
Thu, 29 Nov 2001 23:33:29 EST
New Thread Out Of The Office
Out Of The Office
Paul Ziarek
Tue, 13 Nov 2001 19:37:46 -0600
New Thread Over-etch
Over-etch
<Peter George Duncan>
Fri, 16 Nov 2001 10:26:15 +0800
Re: Over-etch
Zhu, Xiang
Fri, 16 Nov 2001 10:45:51 +0800
Re: Over-etch
<Rudy Sedlak>
Fri, 16 Nov 2001 01:13:57 EST
Re: Over-etch
<Peter George Duncan>
Fri, 16 Nov 2001 16:04:10 +0800
Re: Over-etch
Earl Moon
Fri, 16 Nov 2001 06:18:27 -0600
Re: Over-etch
Roger M. Stoops
Fri, 16 Nov 2001 10:28:41 -0500
Re: Over-etch
Edward Szpruch
Sun, 18 Nov 2001 09:08:05 +0200
Re: Over-etch
<Peter George Duncan>
Mon, 19 Nov 2001 11:30:21 +0800
Re: Over-etch
<Peter George Duncan>
Mon, 19 Nov 2001 14:24:45 +0800
Re: Over-etch
Glynn Shaw
Mon, 19 Nov 2001 09:06:51 -0800
Re: Over-etch
Earl Moon
Wed, 21 Nov 2001 15:41:02 -0600
Re: Over-etch
Mcmaster, Michael
Wed, 21 Nov 2001 16:49:33 -0800
Re: Over-etch
<Peter George Duncan>
Thu, 22 Nov 2001 17:07:12 +0800
Re: Over-etch
Ian Hanna
Thu, 22 Nov 2001 08:49:28 -0500
Re: Over-etch
<Peter George Duncan>
Fri, 23 Nov 2001 12:15:34 +0800
New Thread Over-etch II
Re: Over-etch II
<Rudy Sedlak>
Fri, 16 Nov 2001 10:23:33 EST
Re: Over-etch II
<Peter George Duncan>
Mon, 19 Nov 2001 11:06:55 +0800
Re: Over-etch II
Hinners Hans M Civ WRALC/LUGE
Mon, 19 Nov 2001 13:09:58 -0500
Re: Over-etch II
<Peter George Duncan>
Tue, 20 Nov 2001 13:02:35 +0800
Re: Over-etch II
<Peter George Duncan>
Tue, 20 Nov 2001 13:53:36 +0800
Re: Over-etch II
<Peter George Duncan>
Wed, 21 Nov 2001 07:52:22 +0800
New Thread Pad Lifting
Pad Lifting
Hunter, Brian C
Thu, 15 Nov 2001 14:53:12 -0700
Re: Pad Lifting
Crepeau, Phil
Thu, 15 Nov 2001 14:27:06 -0800
New Thread Pads -vs- Paste -vs- Components
Pads -vs- Paste -vs- Components
Cathy Killen
Fri, 9 Nov 2001 09:06:09 -0000
Re: Pads -vs- Paste -vs- Components
Guy Ramsey
Fri, 9 Nov 2001 14:42:05 -0500
New Thread Parylene coating PBGAs
Parylene coating PBGAs
Houston, Terri
Fri, 9 Nov 2001 09:35:41 -0700
Re: Parylene coating PBGAs
<Peter George Duncan>
Mon, 12 Nov 2001 10:37:32 +0800
New Thread PCB Assembly demographics
PCB Assembly demographics
Tenison Stone
Mon, 12 Nov 2001 07:16:58 -0600
Re: PCB Assembly demographics
Jeff Ferry
Mon, 12 Nov 2001 10:58:45 -0500
New Thread Pick & place equipment process control
Pick & place equipment process control
Peter Lee
Thu, 29 Nov 2001 21:53:57 -0800
New Thread Pick-and-Place Evaluation Checklist?
Pick-and-Place Evaluation Checklist?
Rick Thompson
Tue, 27 Nov 2001 07:22:19 -0800
Re: Pick-and-Place Evaluation Checklist?
Phil Nutting
Tue, 27 Nov 2001 11:03:17 -0500
Re: Pick-and-Place Evaluation Checklist?
Mel Parrish
Tue, 27 Nov 2001 10:33:26 -0800
Re: Pick-and-Place Evaluation Checklist?
Sauer, Steven T.
Tue, 27 Nov 2001 12:50:35 -0500
Re: Pick-and-Place Evaluation Checklist?
Lee Whiteman
Tue, 27 Nov 2001 15:21:11 -0500
Re: Pick-and-Place Evaluation Checklist?
D.Terstegge
Tue, 27 Nov 2001 22:53:05 +0100
New Thread POLYIMIDE TMA RESULTS
POLYIMIDE TMA RESULTS
Earl Moon
Mon, 12 Nov 2001 23:18:38 -0600
New Thread PPM Monitoring and Benchmarking
PPM Monitoring and Benchmarking
Bob Willis
Tue, 13 Nov 2001 17:25:54 -0000
Re: PPM Monitoring and Benchmarking
Adrian Irwin
Tue, 13 Nov 2001 18:30:31 +0000
Re: PPM Monitoring and Benchmarking
<Dan Cavaliere>
Tue, 13 Nov 2001 13:37:39 -0500
Re: PPM Monitoring and Benchmarking
Grant Emandien
Wed, 14 Nov 2001 09:01:59 +0200
Re: PPM Monitoring and Benchmarking
Atkinson, Neil
Wed, 14 Nov 2001 14:17:07 -0000
Re: PPM Monitoring and Benchmarking
Bob Willis
Wed, 14 Nov 2001 18:35:41 -0000
Re: PPM Monitoring and Benchmarking
Ahne Oosterhof
Thu, 15 Nov 2001 09:51:18 -0800
New Thread Pre-bake
Pre-bake
Rick Howieson
Mon, 19 Nov 2001 10:41:06 -0700
Re: Pre-bake
<Peter George Duncan>
Tue, 20 Nov 2001 12:12:44 +0800
Re: Pre-bake
Brian Ellis
Tue, 20 Nov 2001 09:31:14 +0200
Re: Pre-bake
Bob Willis
Tue, 20 Nov 2001 09:44:35 -0000
Re: Pre-bake
Brian Ellis
Tue, 20 Nov 2001 18:43:33 +0200
New Thread Process for Vias in Lands
Process for Vias in Lands
David North
Fri, 2 Nov 2001 13:26:41 -0800
Re: Process for Vias in Lands
Earl Moon
Fri, 2 Nov 2001 16:04:03 -0600
Re: Process for Vias in Lands
Kathy Kuhlow
Fri, 2 Nov 2001 16:54:29 -0600
Re: Process for Vias in Lands
Earl Moon
Fri, 2 Nov 2001 17:16:27 -0600
Re: Process for Vias in Lands
Ryan Grant
Mon, 5 Nov 2001 14:01:46 -0700
Re: Process for Vias in Lands
Furrow, Robert Gordon (Bob)
Mon, 5 Nov 2001 16:31:21 -0500
Re: Process for Vias in Lands
Earl Moon
Mon, 5 Nov 2001 15:47:31 -0600
New Thread PWB MATERIALS, DESIGNS AND TECHNOLOGY
PWB MATERIALS, DESIGNS AND TECHNOLOGY
Stephen R. Gregory
Thu, 15 Nov 2001 10:42:57 EST
Re: PWB MATERIALS, DESIGNS AND TECHNOLOGY
McGlaughlin, Jeffrey A
Fri, 16 Nov 2001 08:15:13 -0500
Re: PWB MATERIALS, DESIGNS AND TECHNOLOGY
Earl Moon
Fri, 16 Nov 2001 08:03:30 -0600
Re: PWB MATERIALS, DESIGNS AND TECHNOLOGY
McGlaughlin, Jeffrey A
Fri, 16 Nov 2001 13:24:51 -0500
Re: PWB MATERIALS, DESIGNS AND TECHNOLOGY
Earl Moon
Fri, 16 Nov 2001 13:13:23 -0600
Re: PWB MATERIALS, DESIGNS AND TECHNOLOGY
Earl Moon
Fri, 16 Nov 2001 13:54:59 -0600
PWB MATERIALS, DESIGNS AND TECHNOLOGY
Marsico, James
Thu, 15 Nov 2001 07:53:39 -0500
Re: PWB MATERIALS, DESIGNS AND TECHNOLOGY
Marsico, James
Fri, 16 Nov 2001 08:33:13 -0500
New Thread QFP Solder Pad Shorts
QFP Solder Pad Shorts
Michael Bell
Wed, 7 Nov 2001 11:13:36 +1300
Re: QFP Solder Pad Shorts
Earl Moon
Tue, 6 Nov 2001 17:02:59 -0600
Re: QFP Solder Pad Shorts
<Peter George Duncan>
Wed, 7 Nov 2001 08:21:16 +0800
Re: QFP Solder Pad Shorts
d. terstegge
Wed, 7 Nov 2001 10:29:49 +0100
Re: QFP Solder Pad Shorts
Earl Moon
Wed, 7 Nov 2001 04:03:04 -0600
Re: QFP Solder Pad Shorts
Dorothy M. Lush
Wed, 7 Nov 2001 07:39:39 -0800
New Thread QFPs with 85% Tin 15% Lead plating
QFPs with 85% Tin 15% Lead plating
Jorge Rodriguez
Wed, 7 Nov 2001 09:12:49 -0700
New Thread Qualifying SMT Adhesives for Space
Qualifying SMT Adhesives for Space
Crain, Bob
Mon, 12 Nov 2001 19:21:16 -0500
Re: Qualifying SMT Adhesives for Space
Stephen R. Gregory
Mon, 12 Nov 2001 19:47:11 EST
Re: Qualifying SMT Adhesives for Space
Crepeau, Phil
Mon, 12 Nov 2001 17:09:27 -0800
Re: Qualifying SMT Adhesives for Space
Brad Saunders
Tue, 13 Nov 2001 07:57:43 EST
New Thread Racks plating up
Re: Racks plating up
<Roger Mouton>
Mon, 5 Nov 2001 14:30:21 EST
New Thread Raw Card Track Repairs
Raw Card Track Repairs
Stephen Brown
Wed, 21 Nov 2001 08:26:45 +0000
Re: Raw Card Track Repairs
<Peter George Duncan>
Wed, 21 Nov 2001 17:52:58 +0800
Re: Raw Card Track Repairs
Phil Nutting
Wed, 21 Nov 2001 08:33:25 -0500
Re: Raw Card Track Repairs
Thomas Highland
Wed, 21 Nov 2001 07:41:19 -0600
Re: Raw Card Track Repairs
Kathy Bergman
Wed, 21 Nov 2001 09:41:25 -0800
Re: Raw Card Track Repairs
Atkinson, Neil
Thu, 22 Nov 2001 07:54:31 -0000
New Thread Recycling Component Reels
Recycling Component Reels
Nevin, Steve @ AR
Wed, 7 Nov 2001 13:27:05 -0500
Re: Recycling Component Reels
Rich Elensky, Senior Manufacturing Engineer
Wed, 7 Nov 2001 13:05:17 -0600
Re: Recycling Component Reels
Ashok Dhawan
Wed, 7 Nov 2001 13:33:56 -0600
Re: Recycling Component Reels
Taylor, Royce
Wed, 7 Nov 2001 15:08:21 -0500
New Thread Red plaque on Silver plated wire?
Red plaque on Silver plated wire?
Kasprzak, Bill (sys) USX
Fri, 30 Nov 2001 15:07:42 -0500
Re: Red plaque on Silver plated wire?
<Rudy Sedlak>
Fri, 30 Nov 2001 21:09:57 EST
New Thread Reflow Oven Sizes
Reflow Oven Sizes
Dave Snyder
Mon, 5 Nov 2001 09:04:10 -0800
Re: Reflow Oven Sizes
d. terstegge
Mon, 5 Nov 2001 18:34:29 +0100
Re: Reflow Oven Sizes
Earl Moon
Mon, 5 Nov 2001 11:40:22 -0600
Re: Reflow Oven Sizes
Vinit Verma
Tue, 6 Nov 2001 08:47:09 +0530
Re: Reflow Oven Sizes
<Peter George Duncan>
Tue, 6 Nov 2001 11:35:40 +0800
Re: Reflow Oven Sizes
Stephen R. Gregory
Mon, 5 Nov 2001 22:45:18 EST
Re: Reflow Oven Sizes
Brad Saunders
Tue, 6 Nov 2001 08:19:49 EST
Re: Reflow Oven Sizes
Earl Moon
Tue, 6 Nov 2001 07:48:53 -0600
Re: Reflow Oven Sizes
Brad Saunders
Tue, 6 Nov 2001 11:32:24 EST
Re: Reflow Oven Sizes
Ken Patel
Tue, 6 Nov 2001 09:38:05 -0800
New Thread Reflow Process Profiling Methods
Reflow Process Profiling Methods
Nancy Reynolds/MKT/HQ/KEMET/US
Thu, 8 Nov 2001 15:25:01 -0500
Re: Reflow Process Profiling Methods
Alan Kreplick
Thu, 8 Nov 2001 15:55:38 -0500
Re: Reflow Process Profiling Methods
Earl Moon
Thu, 8 Nov 2001 15:38:23 -0600
Re: Reflow Process Profiling Methods
Ryan Grant
Thu, 8 Nov 2001 16:09:15 -0700
Re: Reflow Process Profiling Methods
Rich Elensky, Senior Manufacturing Engineer
Thu, 8 Nov 2001 17:04:00 -0600
Re: Reflow Process Profiling Methods
<Peter George Duncan>
Fri, 9 Nov 2001 09:35:03 +0800
Re: Reflow Process Profiling Methods
Werner Engelmaier
Sat, 10 Nov 2001 12:15:59 EST
New Thread Reflow Solder balls
Reflow Solder balls
Cowen, Mike
Wed, 14 Nov 2001 21:38:55 -0600
Re: Reflow Solder balls
Bob Willis
Thu, 15 Nov 2001 07:12:19 -0000
Re: Reflow Solder balls
Vivari, John
Thu, 15 Nov 2001 09:09:51 -0500
Re: Reflow Solder balls
Stephen R. Gregory
Thu, 15 Nov 2001 10:01:22 EST
New Thread Resistor Networks of 0.5 mm Pitch
Resistor Networks of 0.5 mm Pitch
Becerra Alejandro
Wed, 14 Nov 2001 09:42:25 -0500
Re: Resistor Networks of 0.5 mm Pitch
Steve Abrahamson
Wed, 14 Nov 2001 11:04:20 -0700
New Thread Resistor networks on back plane: why use socket?
Resistor networks on back plane: why use socket?
Ken Patel
Fri, 2 Nov 2001 15:45:25 -0800
Re: Resistor networks on back plane: why use socket?
Elensky, Richard
Fri, 2 Nov 2001 16:18:20 -0800
New Thread RF "Black Magic", why do vias need to be beneath compone nts?
Re: RF "Black Magic", why do vias need to be beneath compone nts?
Safavi-Bayat Shahed
Wed, 21 Nov 2001 07:24:18 -0500
Re: RF "Black Magic", why do vias need to be beneath compone nts?
Frank Kimmey
Wed, 21 Nov 2001 06:57:14 -0800
Re: RF "Black Magic", why do vias need to be beneath compone nts?
Stephen R. Gregory
Wed, 21 Nov 2001 13:38:37 EST
New Thread RF "Black Magic", why do vias need to be beneath components?
RF "Black Magic", why do vias need to be beneath components?
Stephen R. Gregory
Tue, 20 Nov 2001 21:18:26 EST
New Thread Rough PTH barrel walls in ENIG plated PCB...
Rough PTH barrel walls in ENIG plated PCB...
Stephen R. Gregory
Tue, 20 Nov 2001 17:38:46 EST
Re: Rough PTH barrel walls in ENIG plated PCB...
<Rudy Sedlak>
Tue, 20 Nov 2001 18:59:48 EST
Re: Rough PTH barrel walls in ENIG plated PCB...
Crepeau, Phil
Tue, 20 Nov 2001 16:01:15 -0800
Re: Rough PTH barrel walls in ENIG plated PCB...
<Peter George Duncan>
Wed, 21 Nov 2001 08:38:50 +0800
Re: Rough PTH barrel walls in ENIG plated PCB...
<>
Tue, 20 Nov 2001 21:08:04 EST
Re: Rough PTH barrel walls in ENIG plated PCB...
George Milad
Tue, 20 Nov 2001 21:45:58 EST
Re: Rough PTH barrel walls in ENIG plated PCB...
Edward Szpruch
Wed, 21 Nov 2001 08:02:50 +0200
Re: Rough PTH barrel walls in ENIG plated PCB...
Goldman, Patricia J.
Wed, 21 Nov 2001 08:26:09 -0500
Re: Rough PTH barrel walls in ENIG plated PCB...
McMullen, Kerry
Wed, 21 Nov 2001 08:29:15 -0500
New Thread Ruggedizing Assemblies...
Ruggedizing Assemblies...
Stephen R. Gregory
Sat, 3 Nov 2001 19:53:37 EST
Re: Ruggedizing Assemblies...
mech_eng
Sun, 4 Nov 2001 09:53:12 +0200
Re: Ruggedizing Assemblies...
Genny Gibbard
Mon, 5 Nov 2001 08:24:04 -0600
Re: Ruggedizing Assemblies...
Wildes, Earl
Mon, 5 Nov 2001 07:08:43 -0800
New Thread Rusty
Rusty
Kathy Kuhlow
Thu, 29 Nov 2001 11:55:52 -0600
Re: Rusty
Ahne Oosterhof
Thu, 29 Nov 2001 10:40:35 -0800
Re: Rusty
Stephen R. Gregory
Thu, 29 Nov 2001 13:57:04 EST
Re: Rusty
<Peter George Duncan>
Fri, 30 Nov 2001 08:18:37 +0800
Re: Rusty
Mike Fenner
Fri, 30 Nov 2001 13:52:11 -0000
Re: Rusty
Earl Moon
Fri, 30 Nov 2001 08:56:04 -0600
Re: Rusty
Gary McCauley
Fri, 30 Nov 2001 09:05:59 -0600
Re: Rusty
Earl Moon
Fri, 30 Nov 2001 09:10:00 -0600
Re: Rusty
Eric Christison
Fri, 30 Nov 2001 15:10:13 +0000
New Thread Seeking info on replacement for IP Alcohol which is no l onger allowed for cleaning of electronics in California
Re: Seeking info on replacement for IP Alcohol which is no l onger allowed for cleaning of electronics in California
Michael Bell
Mon, 12 Nov 2001 09:17:03 +1300
Re: Seeking info on replacement for IP Alcohol which is no l onger allowed for cleaning of electronics in California
Bogert
Sun, 11 Nov 2001 15:52:04 -0500
New Thread Seeking info on replacement for IP Alcohol which is no longer allowe...
Re: Seeking info on replacement for IP Alcohol which is no longer allowe...
<Rudy Sedlak>
Sun, 11 Nov 2001 23:38:46 EST
Re: Seeking info on replacement for IP Alcohol which is no longer allowe...
Bogert
Mon, 12 Nov 2001 18:07:25 -0500
New Thread Seeking info on replacement for IP Alcohol which is no longer allowed for cleaning of electronics in California
Seeking info on replacement for IP Alcohol which is no longer allowed for cleaning of electronics in California
Bogert
Sun, 11 Nov 2001 15:13:49 -0500
New Thread Seeking info on replacement for IP Alcohol which is no longerallowed for cleaning of electronics in California
Re: Seeking info on replacement for IP Alcohol which is no longerallowed for cleaning of electronics in California
Brian Ellis
Mon, 12 Nov 2001 08:50:53 +0200
Re: Seeking info on replacement for IP Alcohol which is no longerallowed for cleaning of electronics in California
Ian Hanna
Mon, 12 Nov 2001 09:35:09 -0500
Re: Seeking info on replacement for IP Alcohol which is no longerallowed for cleaning of electronics in California
Lynn Norman
Mon, 12 Nov 2001 10:07:37 -0600
Re: Seeking info on replacement for IP Alcohol which is no longerallowed for cleaning of electronics in California
Bogert
Mon, 12 Nov 2001 18:11:26 -0500
Re: Seeking info on replacement for IP Alcohol which is no longerallowed for cleaning of electronics in California
Bogert
Mon, 12 Nov 2001 18:20:26 -0500
Re: Seeking info on replacement for IP Alcohol which is no longerallowed for cleaning of electronics in California
Bogert
Mon, 12 Nov 2001 18:22:25 -0500
New Thread Seeking info on replacement for IP Alcohol which is nolongerallowed for cleaning of electronics in California
Re: Seeking info on replacement for IP Alcohol which is nolongerallowed for cleaning of electronics in California
Brian Ellis
Mon, 12 Nov 2001 18:39:38 +0200
New Thread Separation of DIN connector
Separation of DIN connector
Ou Sokkhon-R5AALJ
Wed, 14 Nov 2001 12:40:20 -0700
New Thread Silicones in Printed Wiring Board Assembly
Silicones in Printed Wiring Board Assembly
Anderson, Greg (IndSys, GEFanuc, NA)
Mon, 26 Nov 2001 13:58:58 -0500
Re: Silicones in Printed Wiring Board Assembly
Tom Parkinson - Quality System Manager
Mon, 26 Nov 2001 14:14:19 -0500
Re: Silicones in Printed Wiring Board Assembly
<>
Mon, 26 Nov 2001 13:34:57 -0600
New Thread SMD and Flex Circuits
SMD and Flex Circuits
Buscomb, Scott
Thu, 1 Nov 2001 10:41:33 -0700
Re: SMD and Flex Circuits
Steve Kelly
Mon, 5 Nov 2001 13:25:30 -0500
New Thread solder fountains
solder fountains
Phil Nutting
Wed, 7 Nov 2001 14:54:27 -0500
Re: solder fountains
Earl Moon
Wed, 7 Nov 2001 14:03:19 -0600
Re: solder fountains
Earl Moon
Wed, 7 Nov 2001 14:19:36 -0600
Re: solder fountains
Jon Moore
Wed, 7 Nov 2001 15:33:45 EST
Re: solder fountains
Jeff Ferry
Wed, 7 Nov 2001 15:43:30 -0500
Re: solder fountains
Earl Moon
Wed, 7 Nov 2001 14:46:06 -0600
Re: solder fountains
David Fish
Wed, 7 Nov 2001 16:29:56 -0800
Re: solder fountains
Earl Moon
Wed, 7 Nov 2001 15:39:06 -0600
New Thread Solder mask outgassing
Re: Solder mask outgassing
Bob Willis
Tue, 20 Nov 2001 19:11:28 -0000
New Thread Solder Resist and QFP's
Solder Resist and QFP's
Michael Bell
Wed, 28 Nov 2001 11:14:44 +1300
Re: Solder Resist and QFP's
Furrow, Robert Gordon (Bob)
Wed, 28 Nov 2001 08:27:28 -0500
Re: Solder Resist and QFP's
Kathy Kuhlow
Wed, 28 Nov 2001 08:22:20 -0600
Re: Solder Resist and QFP's
Dougal Stewart
Thu, 29 Nov 2001 15:08:20 -0000
New Thread Solder spikes and icicling
Solder spikes and icicling
peter lee
Tue, 20 Nov 2001 08:56:03 -0800
Re: Solder spikes and icicling
Kathy Kuhlow
Tue, 20 Nov 2001 11:09:11 -0600
Re: Solder spikes and icicling
Steve Owen
Wed, 21 Nov 2001 08:12:51 -0000
New Thread Solder temperature question
Solder temperature question
Diamond, Pat
Tue, 13 Nov 2001 08:17:01 -0000
Re: Solder temperature question
Phil Hinton
Tue, 13 Nov 2001 13:30:32 EST
Re: Solder temperature question
Werner Engelmaier
Tue, 13 Nov 2001 20:05:29 EST
Re: Solder temperature question
<Peter George Duncan>
Thu, 15 Nov 2001 16:26:40 +0800
New Thread solderability
solderability
Shine Wang-0337CE
Fri, 16 Nov 2001 15:37:04 +0800
Re: solderability
Kathy Kuhlow
Fri, 16 Nov 2001 08:23:44 -0600
Re: solderability
Graham Naisbitt
Fri, 16 Nov 2001 16:39:12 -0000
Re: solderability
David Hillman
Fri, 16 Nov 2001 11:21:01 -0600
Re: solderability
Joseph H. Smith
Sat, 17 Nov 2001 10:15:44 +0800
New Thread Soldering wires to PWB with SMT Reflow process
Soldering wires to PWB with SMT Reflow process
Bob Donaldson
Fri, 16 Nov 2001 10:02:45 -0600
Re: Soldering wires to PWB with SMT Reflow process
Phil Nutting
Fri, 16 Nov 2001 11:52:39 -0500
Re: Soldering wires to PWB with SMT Reflow process
Sauer, Steven T.
Fri, 16 Nov 2001 12:30:28 -0500
Re: Soldering wires to PWB with SMT Reflow process
Elensky, Richard
Fri, 16 Nov 2001 09:48:36 -0800
New Thread Spacing between 0805s
Spacing between 0805s
Angelo DiMichele
Wed, 7 Nov 2001 10:43:13 -0500
Re: Spacing between 0805s
Earl Moon
Wed, 7 Nov 2001 11:23:35 -0600
Re: Spacing between 0805s
Steve Abrahamson
Wed, 7 Nov 2001 14:09:38 -0700
New Thread Spacing between board to board that has mouse/rat bite d esign...
Re: Spacing between board to board that has mouse/rat bite d esign...
Hinners Hans M Civ WRALC/LUGE
Wed, 14 Nov 2001 13:31:29 -0500
New Thread Spacing between board to board that has mouse/rat bite design...
Spacing between board to board that has mouse/rat bite design...
Ken Patel
Mon, 12 Nov 2001 10:03:53 -0800
Re: Spacing between board to board that has mouse/rat bite design...
Roger M. Stoops
Mon, 12 Nov 2001 13:56:42 -0500
New Thread Specific Heats
Specific Heats
Andy Magee
Thu, 1 Nov 2001 15:29:35 -0500
New Thread SSD by Mask Technology - Anybody using it?
SSD by Mask Technology - Anybody using it?
John Parsons
Thu, 1 Nov 2001 14:06:22 -0800
Re: SSD by Mask Technology - Anybody using it?
Charles McMahon
Thu, 1 Nov 2001 18:51:58 -0500
New Thread SSOP to SOIC adaptors...
SSOP to SOIC adaptors...
Stephen R. Gregory
Tue, 27 Nov 2001 17:12:15 EST
Re: SSOP to SOIC adaptors...
David Fish
Tue, 27 Nov 2001 22:34:15 -0800
New Thread Stencil Reductions
Stencil Reductions
Cathy Killen
Mon, 19 Nov 2001 09:16:53 -0000
Re: Stencil Reductions
Bob Willis
Mon, 19 Nov 2001 12:52:06 -0000
Re: Stencil Reductions
Ahne Oosterhof
Mon, 19 Nov 2001 07:27:17 -0800
New Thread Storage of moisture sensitive components
Storage of moisture sensitive components
Gaby Bogdan
Fri, 23 Nov 2001 09:07:54 +0200
Re: Storage of moisture sensitive components
Busko, Wolfgang
Fri, 23 Nov 2001 10:05:11 +0100
Re: Storage of moisture sensitive components
Gaby Bogdan
Fri, 23 Nov 2001 11:14:12 +0200
Re: Storage of moisture sensitive components
Francois Monette
Mon, 26 Nov 2001 14:49:04 -0500
New Thread STRIPPING MAGNET WIRE
Re: STRIPPING MAGNET WIRE
Marsico, James
Wed, 31 Oct 2001 13:11:15 -0500
Re: STRIPPING MAGNET WIRE
Sherry Warner
Fri, 2 Nov 2001 13:18:32 -0500
Re: STRIPPING MAGNET WIRE
Linda Langley
Fri, 2 Nov 2001 13:38:12 -0500
Re: STRIPPING MAGNET WIRE
Matt Stanik
Fri, 2 Nov 2001 12:50:21 -0600
Re: STRIPPING MAGNET WIRE
Dieselberg, Ron
Tue, 6 Nov 2001 07:33:50 -0500
New Thread Tape splicing tool recommendations
Tape splicing tool recommendations
Rick Thompson
Mon, 12 Nov 2001 10:43:40 -0800
Re: Tape splicing tool recommendations
Elensky, Richard
Mon, 12 Nov 2001 11:24:29 -0800
Re: Tape splicing tool recommendations
David Fish
Mon, 12 Nov 2001 20:23:44 -0800
Re: Tape splicing tool recommendations
Dean Lillibridge
Tue, 13 Nov 2001 08:50:28 -0500
New Thread TechNet Digest - 18 Nov 2001 to 19 Nov 2001 - Special issue (#2001-713)
Re: TechNet Digest - 18 Nov 2001 to 19 Nov 2001 - Special issue (#2001-713)
Tom Colby
Mon, 19 Nov 2001 10:16:20 -0500
Re: TechNet Digest - 18 Nov 2001 to 19 Nov 2001 - Special issue (#2001-713)
Denis Lefebvre
Mon, 19 Nov 2001 07:42:59 -0800
Re: TechNet Digest - 18 Nov 2001 to 19 Nov 2001 - Special issue (#2001-713)
Paul
Mon, 19 Nov 2001 12:56:44 -0500
New Thread test e-mail
test e-mail
Marsico, James
Mon, 19 Nov 2001 07:48:50 -0500
Re: test e-mail
<>
Tue, 20 Nov 2001 14:42:47 -0600
New Thread Tg of FR-4
Tg of FR-4
Darnell, Barry (IndSys, GEFanuc, CDI)
Thu, 8 Nov 2001 10:10:21 -0500
Re: Tg of FR-4
Rick Pfeiffer
Thu, 8 Nov 2001 10:22:36 -0500
Re: Tg of FR-4
<>
Thu, 8 Nov 2001 10:39:06 -0600
New Thread Thanks Everyone: Re: [TN] Looking for Information
Thanks Everyone: Re: [TN] Looking for Information
David Hillman
Wed, 28 Nov 2001 18:15:40 -0600
New Thread Thanks you
Thanks you
Kathy Kuhlow
Fri, 30 Nov 2001 10:36:57 -0600
New Thread Thermal Capacity
Thermal Capacity
Werner Engelmaier
Thu, 1 Nov 2001 11:19:45 EST
Re: Thermal Capacity
David Fish
Fri, 2 Nov 2001 09:35:19 -0800
Re: Thermal Capacity
Marsico, James
Fri, 2 Nov 2001 13:50:34 -0500
New Thread thermistors
Re: thermistors
chris johnston
Thu, 26 Oct 2000 10:15:32 +1100
Re: thermistors
Lik-Jen Wu
Wed, 21 Nov 2001 09:36:27 -0500
New Thread Thick PCBs
Thick PCBs
George Becker
Fri, 9 Nov 2001 07:41:29 -0600
Re: Thick PCBs
Jeff Ferry
Fri, 9 Nov 2001 10:13:44 -0500
Re: Thick PCBs
Linda Langley
Fri, 9 Nov 2001 10:58:57 -0500
New Thread this is a test
this is a test
Marsico, James
Tue, 13 Nov 2001 06:55:28 -0500
New Thread University web page
University web page
Rajkumar
Wed, 27 Nov 2002 13:37:29 -0000
New Thread Unsubscribe
Unsubscribe
Stephen Ayotte
Tue, 13 Nov 2001 06:57:44 -0500
unsubscribe
Fritz Benjamin Cabingan
Thu, 15 Nov 2001 13:55:10 +0800
Re: unsubscribe
Dorothy M. Lush
Sat, 24 Nov 2001 13:27:05 -0800
New Thread Void in capacitor
Void in capacitor
Becerra Alejandro
Wed, 14 Nov 2001 09:52:37 -0500
Re: Void in capacitor
Bob Willis
Wed, 14 Nov 2001 18:45:33 -0000
New Thread Wave soldeing jig thickness
Wave soldeing jig thickness
Peter Lee
Mon, 26 Nov 2001 23:44:19 -0800
Re: Wave soldeing jig thickness
Graham Collins
Tue, 27 Nov 2001 06:49:46 -0500
Re: Wave soldeing jig thickness
peter lee
Tue, 27 Nov 2001 13:57:41 -0800
Wave soldeing jig thickness
Ivan Barrios
Tue, 27 Nov 2001 15:52:57 -0700
Re: Wave soldeing jig thickness
Peter Lee
Tue, 27 Nov 2001 23:49:42 -0800
Re: Wave soldeing jig thickness
Ou Sokkhon-R5AALJ
Wed, 28 Nov 2001 07:44:14 -0700
Re: Wave soldeing jig thickness
Jon Moore
Wed, 28 Nov 2001 10:57:17 EST
New Thread Wave Solder Profiling
Wave Solder Profiling
Barry Gallegos
Thu, 29 Nov 2001 07:08:27 -0700
Re: Wave Solder Profiling
Earl Moon
Thu, 29 Nov 2001 08:32:28 -0600
Re: Wave Solder Profiling
Earl Moon
Fri, 30 Nov 2001 07:07:46 -0600
Re: Wave Solder Profiling
Sauer, Steven T.
Fri, 30 Nov 2001 08:42:11 -0500
Re: Wave Solder Profiling
Earl Moon
Fri, 30 Nov 2001 08:52:20 -0600
New Thread Wave soldering jig thickness
Re: Wave soldering jig thickness
Adrian Irwin
Tue, 27 Nov 2001 12:13:43 +0000
New Thread WaveSolder Process Monitoring Tools
WaveSolder Process Monitoring Tools
Mike Manwell
Thu, 15 Nov 2001 16:24:32 -0600
Re: WaveSolder Process Monitoring Tools
Guy Ramsey
Thu, 15 Nov 2001 18:00:38 -0500
Re: WaveSolder Process Monitoring Tools
Peter Crain
Thu, 15 Nov 2001 18:20:13 -0500
Re: WaveSolder Process Monitoring Tools
Ashok Dhawan
Fri, 16 Nov 2001 09:15:12 -0600
New Thread Which standards do apply for civil aircrafts ?
Which standards do apply for civil aircrafts ?
Roland Jaquet
Wed, 14 Nov 2001 10:47:40 +0100
New Thread [LF] US lead free logo TV Ad
Re: [LF] US lead free logo TV Ad
Bob Willis
Thu, 15 Nov 2001 09:09:52 -0000

ATOM RSS1 RSS2