LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Stadem, Richard D.

Wed, 20 Oct 2010 08:17:50 -0500

Glidden, Kevin

Wed, 20 Oct 2010 10:07:44 -0400

Inge

Wed, 20 Oct 2010 16:21:39 +0200

Wed, 20 Oct 2010 15:35:57 +0000

: Friday quiz 23, some more answers

PCB/Flex Product Engineer

Wed, 20 Oct 2010 12:25:45 -0700

Inge

Thu, 28 Oct 2010 20:02:57 +0200

Mark Larson

Fri, 15 Oct 2010 09:11:09 -0500

Mike Buetow

Fri, 15 Oct 2010 10:22:56 -0400

Joyce Koo

Fri, 15 Oct 2010 10:32:01 -0400

Mark Larson

Fri, 15 Oct 2010 09:53:04 -0500

Inge

Fri, 15 Oct 2010 19:23:56 +0200

Joyce Koo

Fri, 15 Oct 2010 14:03:38 -0400

analytical determination of stainless flavor

Re: analytical determination of stainless flavor

Ed Popielarski

Fri, 1 Oct 2010 09:52:57 -0700

Antenna Standard/Guidelines

Syed Ahmad

Fri, 22 Oct 2010 09:01:45 -0500

Re: Antenna Standard/Guidelines

Inge

Fri, 22 Oct 2010 16:31:53 +0200

Any recommendations for solder alloy to tin DLO/RHH flexible wire?"

Doug@lcm

Fri, 22 Oct 2010 15:03:24 -0700

Re: Any recommendations for solder alloy to tin DLO/RHH flexible wire?"

Mike Fenner

Mon, 25 Oct 2010 10:00:44 +0100

automated response

jonathan griffiths

Fri, 22 Oct 2010 16:49:00 +0100

AW: [TN] Cracks in BGA solderjoints

Grossmann, Guenter

Wed, 27 Oct 2010 14:50:41 +0200

Re: AW: [TN] Cracks in BGA solderjoints

vladimir Igoshev

Wed, 27 Oct 2010 13:16:38 +0000

AW: [TN] Cracks in BGA solderjoints - Found word(s) list error in the Text body

Re: AW: [TN] Cracks in BGA solderjoints - Found word(s) list error in the Text body

Paul Edwards

Wed, 27 Oct 2010 20:06:53 -0700

AW: [TN] Press Pin Fits connector

Neifer, Gebhard

Mon, 25 Oct 2010 08:01:42 +0000

AW: [TN] Press Pin Fits connector

Neifer, Gebhard

Mon, 25 Oct 2010 09:04:32 +0000

Cleanable Long Stencil Time Flux Question

Robert Kondner

Wed, 20 Oct 2010 10:09:41 -0400

Bob Landman

Wed, 20 Oct 2010 10:50:48 -0400

Stadem, Richard D.

Wed, 20 Oct 2010 10:06:25 -0500

Paul Edwards

Wed, 20 Oct 2010 11:01:13 -0700

Re: Cleaning No Clean Flux

Stadem, Richard D.

Wed, 20 Oct 2010 13:14:35 -0500

Cleaning No Clean Flux

Hetal Shah

Sat, 23 Oct 2010 11:44:10 -0700

Conformal Coating Board Edges

Douglas Pauls

Wed, 20 Oct 2010 13:20:47 -0500

Graham Collins

Wed, 20 Oct 2010 15:26:19 -0300

Mike Sewell

Wed, 20 Oct 2010 13:47:55 -0500

Reuven Rokah

Wed, 20 Oct 2010 21:31:06 +0200

Graham Naisbitt

Wed, 20 Oct 2010 21:15:00 +0100

Inge

Wed, 20 Oct 2010 22:46:36 +0200

Inge

Wed, 20 Oct 2010 22:50:03 +0200

Inge

Wed, 20 Oct 2010 23:04:09 +0200

Stadem, Richard D.

Wed, 20 Oct 2010 16:27:30 -0500

Douglas Pauls

Wed, 20 Oct 2010 16:40:17 -0500

Bryon Boone

Wed, 20 Oct 2010 17:40:10 -0400

Inge

Thu, 21 Oct 2010 08:57:06 +0200

Graham Naisbitt

Thu, 21 Oct 2010 11:24:24 +0100

Joyce Koo

Thu, 21 Oct 2010 06:43:10 -0400

Glidden, Kevin

Thu, 21 Oct 2010 08:31:23 -0400

Fox, Ian

Thu, 21 Oct 2010 14:03:00 +0100

Inge

Thu, 21 Oct 2010 15:39:58 +0200

Inge

Thu, 21 Oct 2010 23:51:51 +0200

Douglas Pauls

Fri, 22 Oct 2010 09:26:27 -0500

Joyce Koo

Fri, 22 Oct 2010 10:32:18 -0400

David Douthit

Fri, 22 Oct 2010 14:42:25 -0700

Conformal Coating Board Edges, reflexion

Douglas Pauls

Mon, 25 Oct 2010 07:28:32 -0500

Inge

Thu, 21 Oct 2010 16:49:37 +0200

Werner Engelmaier

Thu, 21 Oct 2010 12:11:32 -0400

Inge

Thu, 21 Oct 2010 18:17:10 +0200

Joyce Koo

Thu, 21 Oct 2010 12:20:47 -0400

Douglas Pauls

Fri, 22 Oct 2010 09:35:04 -0500

Phil Bavaro

Mon, 25 Oct 2010 13:35:44 -0700

COTS IPC/WHMA-A-620A

Bryon Boone

Thu, 7 Oct 2010 18:06:00 -0400

Gene Felder

Thu, 7 Oct 2010 15:31:39 -0700

Bryon Boone

Thu, 7 Oct 2010 19:09:28 -0400

Blair Hogg

Fri, 8 Oct 2010 08:11:15 -0500

Could you Help Counterfeit Component detection project

Louis Hart

Fri, 8 Oct 2010 11:57:01 -0400

Mike Fenner

Fri, 29 Oct 2010 13:27:46 +0100

Cracks in BGA solderjoints

Grossmann, Guenter

Wed, 27 Oct 2010 09:36:56 +0200

Steve Gregory

Wed, 27 Oct 2010 07:08:17 -0400

Inge

Wed, 27 Oct 2010 13:11:40 +0200

Inge

Wed, 27 Oct 2010 13:17:08 +0200

Joyce Koo

Wed, 27 Oct 2010 07:25:53 -0400

Victor Hernandez

Wed, 27 Oct 2010 07:05:01 -0500

Herminia Guevarra

Wed, 27 Oct 2010 09:32:19 -0400

Steve Gregory

Wed, 27 Oct 2010 09:35:17 -0400

vladimir Igoshev

Wed, 27 Oct 2010 13:59:25 +0000

Thayer, Wayne - IIW

Wed, 27 Oct 2010 10:00:59 -0400

Werner Engelmaier

Wed, 27 Oct 2010 10:21:07 -0400

vladimir Igoshev

Wed, 27 Oct 2010 14:41:37 +0000

Werner Engelmaier

Wed, 27 Oct 2010 11:00:44 -0400

Robert Kondner

Wed, 27 Oct 2010 11:17:25 -0400

Inge

Wed, 27 Oct 2010 18:03:26 +0200

Stewart McCracken

Wed, 27 Oct 2010 16:07:41 +0000

vladimir Igoshev

Wed, 27 Oct 2010 16:14:07 +0000

Cracks in BGA solderjoints

Leland Woodall

Wed, 27 Oct 2010 16:09:23 -0400

Inge

Thu, 28 Oct 2010 10:20:42 +0200

Detecting Oxidation Levels of PTH

Steve Gregory

Thu, 28 Oct 2010 10:05:26 -0400

Leland Woodall

Thu, 14 Oct 2010 15:49:02 -0400

Joyce Koo

Thu, 14 Oct 2010 17:25:33 -0400

Tan Geok Ang

Fri, 15 Oct 2010 08:23:11 +0800

Chris Mahanna

Thu, 14 Oct 2010 21:18:04 -0400

Joyce Koo

Thu, 14 Oct 2010 21:22:38 -0400

Leland Woodall

Fri, 15 Oct 2010 08:32:25 -0400

Leland Woodall

Fri, 15 Oct 2010 08:35:22 -0400

Joyce Koo

Fri, 15 Oct 2010 08:36:31 -0400

Joyce Koo

Fri, 15 Oct 2010 08:44:11 -0400

Leland Woodall

Fri, 15 Oct 2010 08:44:48 -0400

Paul Edwards

Fri, 15 Oct 2010 12:13:24 -0700

Stadem, Richard D.

Sat, 16 Oct 2010 08:01:50 -0500

Joyce Koo

Sat, 16 Oct 2010 12:40:02 -0400

Paul Edwards

Mon, 18 Oct 2010 09:45:57 -0700

Stadem, Richard D.

Mon, 18 Oct 2010 13:24:46 -0500

Joyce Koo

Mon, 18 Oct 2010 16:23:20 -0400

Leland Woodall

Mon, 18 Oct 2010 16:41:23 -0400

Paul Edwards

Mon, 18 Oct 2010 13:38:11 -0700

Joyce Koo

Mon, 18 Oct 2010 16:59:41 -0400

Tan Geok Ang

Tue, 19 Oct 2010 08:48:12 +0800

Mike Fenner

Tue, 19 Oct 2010 09:00:56 +0100

Disappearing Fluorescence

Stadem, Richard D.

Tue, 19 Oct 2010 07:32:28 -0500

Douglas Pauls

Wed, 27 Oct 2010 07:29:43 -0500

Bev Christian

Wed, 27 Oct 2010 08:37:33 -0400

Mike Sewell

Wed, 27 Oct 2010 07:42:40 -0500

Douglas Pauls

Wed, 27 Oct 2010 07:53:34 -0500

Douglas Pauls

Wed, 27 Oct 2010 07:55:12 -0500

Graham Collins

Wed, 27 Oct 2010 09:58:20 -0300

Jerry Dengler

Wed, 27 Oct 2010 09:00:21 -0400

Douglas Pauls

Wed, 27 Oct 2010 08:16:12 -0500

Fredrik Skillborg

Wed, 27 Oct 2010 15:13:21 +0200

Joyce Koo

Wed, 27 Oct 2010 09:26:56 -0400

Joyce Koo

Wed, 27 Oct 2010 09:28:06 -0400

Douglas Pauls

Wed, 27 Oct 2010 08:34:42 -0500

Bob Landman

Wed, 27 Oct 2010 15:01:39 -0400

Dennis Fritz

Wed, 27 Oct 2010 15:49:41 -0400

Douglas Pauls

Wed, 27 Oct 2010 14:51:05 -0500

Does anyone have a driver?

Jack Olson

Thu, 28 Oct 2010 10:34:37 -0500

Inge

Mon, 11 Oct 2010 22:50:45 +0200

drill bits and resharpening - printed circuit fabrication

Louis Hart

Wed, 6 Oct 2010 12:07:00 -0400

Re: drill bits and resharpening - printed circuit fabrication

Werner Engelmaier

Wed, 6 Oct 2010 14:31:05 -0400

Feeders

Blair Hogg

Fri, 22 Oct 2010 09:51:18 -0500

Davis, Larry

Fri, 22 Oct 2010 08:47:02 -0700

Karen Capps

Fri, 22 Oct 2010 12:09:47 -0400

Robert Kondner

Fri, 22 Oct 2010 18:12:16 -0400

Graham Collins

Mon, 25 Oct 2010 07:35:28 -0300

Fiber Optic Cables

Gyorke, Chad (SA-1)

Wed, 20 Oct 2010 09:39:37 -0400

Joyce Koo

Wed, 20 Oct 2010 10:35:30 -0400

Gyorke, Chad (SA-1)

Wed, 20 Oct 2010 10:51:03 -0400

Bob Landman

Wed, 20 Oct 2010 10:41:36 -0400

Joyce Koo

Wed, 20 Oct 2010 10:56:30 -0400

Bob Landman

Wed, 20 Oct 2010 10:54:06 -0400

Inge

Wed, 20 Oct 2010 17:49:41 +0200

Bryon Boone

Thu, 21 Oct 2010 14:30:51 -0400

Re: FR4 Temperature and Life

Paul Reid

Thu, 21 Oct 2010 17:30:49 -0400

FR4 Temperature and Life

Robert Kondner

Thu, 21 Oct 2010 13:12:30 -0400

Werner Engelmaier

Thu, 21 Oct 2010 15:05:53 -0400

Re: FR4 Temperature and Life

Inge

Thu, 21 Oct 2010 21:28:14 +0200

Re: FR4 Temperature and Life

Robert Kondner

Thu, 21 Oct 2010 15:30:15 -0400

Haloing/Delamination to edge of board

Lum Wee Mei

Fri, 8 Oct 2010 08:54:30 +0800

Andy Price

Fri, 8 Oct 2010 09:17:48 -0400

John Goulet

Tue, 12 Oct 2010 16:03:35 +0000

Stadem, Richard D.

Tue, 12 Oct 2010 11:52:16 -0500

Inquiry on ENIG thickness Measurements

Stadem, Richard D.

Tue, 12 Oct 2010 15:13:32 -0500

Heavy Components

Noel, William J - GS

Wed, 6 Oct 2010 12:33:45 -0400

Immersion tin

Karen Tellefsen

Mon, 18 Oct 2010 15:16:56 -0400

Re: Immersion tin

Richard Hatano

Wed, 20 Oct 2010 16:31:03 -0700

Re: Immersion tin

Hetal Shah

Sat, 23 Oct 2010 08:21:54 -0700

FW: Inquiry on ENIG thickness Measurements

IMI TAN, Ann Jovelyn B.

Thu, 28 Oct 2010 19:00:26 +0800

Re: FW: Inquiry on ENIG thickness Measurements

Inge

Fri, 29 Oct 2010 23:52:25 +0200

Interpretation of SIR Requirements

Bev Christian

Thu, 14 Oct 2010 14:29:58 -0400

Stadem, Richard D.

Thu, 14 Oct 2010 13:39:04 -0500

Bev Christian

Thu, 14 Oct 2010 15:12:39 -0400

Stadem, Richard D.

Thu, 14 Oct 2010 14:35:34 -0500

Joe Russeau

Thu, 14 Oct 2010 16:01:05 -0400

Graham Naisbitt

Thu, 14 Oct 2010 21:56:16 +0100

Bev Christian

Thu, 14 Oct 2010 17:10:56 -0400

Inge

Thu, 14 Oct 2010 23:35:31 +0200

Chris Mahanna

Thu, 14 Oct 2010 21:56:55 -0400

IPC APEX EXPO Moderators Wanted - one day free conference admission

Bev Christian

Fri, 15 Oct 2010 08:36:23 -0400

Kim Sterling

Fri, 1 Oct 2010 15:07:38 -0500

Re: IPC APEX EXPO Moderators Wanted - one day free conference admission

Lee parker

Fri, 1 Oct 2010 16:09:43 -0400

Re: IPC APEX EXPO Moderators Wanted - one day free conference admission

Mumtaz Bora

Fri, 1 Oct 2010 13:45:59 -0700

IPC Thermal Cycle & Shock Document

Richard Kraszewski

Wed, 27 Oct 2010 14:31:49 -0500

Richard Kraszewski

Wed, 27 Oct 2010 14:51:56 -0500

Werner Engelmaier

Wed, 27 Oct 2010 16:33:34 -0400

David D. Hillman

Wed, 27 Oct 2010 19:25:10 -0500

Re: large area EDX detectors

Richard Kraszewski

Thu, 28 Oct 2010 22:02:56 -0500

large area EDX detectors

Stewart McCracken

Fri, 22 Oct 2010 16:31:39 +0000

Lead free compatible PCB material list

Inge

Fri, 22 Oct 2010 09:49:13 +0200

Re: Lead free compatible PCB material list

Inge

Fri, 22 Oct 2010 09:50:24 +0200

MCM modules

John Foster

Fri, 22 Oct 2010 08:48:54 -0700

Re: MCM modules

Inge

Fri, 22 Oct 2010 18:46:14 +0200

Re: MCM modules

Inge

Fri, 22 Oct 2010 19:58:54 +0200

Re: MCM modules

Steven Creswick

Sun, 24 Oct 2010 11:15:09 -0400

Mech. damage or poor wetting?

Chris Mahanna

Mon, 11 Oct 2010 12:29:24 -0400

Joyce Koo

Mon, 11 Oct 2010 13:19:53 -0400

Paul Edwards

Mon, 11 Oct 2010 10:43:25 -0700

Chris Mahanna

Mon, 11 Oct 2010 13:59:25 -0400

David D. Hillman

Mon, 11 Oct 2010 13:22:11 -0500

Chris Mahanna

Mon, 11 Oct 2010 14:40:41 -0400

Victor Hernandez

Mon, 11 Oct 2010 13:46:32 -0500

Thayer, Wayne - IIW

Mon, 11 Oct 2010 14:51:51 -0400

Thayer, Wayne - IIW

Mon, 11 Oct 2010 14:54:48 -0400

Victor Hernandez

Mon, 11 Oct 2010 14:41:15 -0500

Chris Mahanna

Mon, 11 Oct 2010 15:51:43 -0400

Werner Engelmaier

Mon, 11 Oct 2010 16:01:39 -0400

Joyce Koo

Mon, 11 Oct 2010 16:03:27 -0400

Werner Engelmaier

Mon, 11 Oct 2010 16:09:47 -0400

Chris Mahanna

Mon, 11 Oct 2010 16:36:24 -0400

Werner Engelmaier

Mon, 11 Oct 2010 16:48:31 -0400

Paul Edwards

Mon, 11 Oct 2010 13:57:42 -0700

Inge

Mon, 11 Oct 2010 23:52:00 +0200

John Burke

Mon, 11 Oct 2010 15:15:42 -0700

Inge

Tue, 12 Oct 2010 00:25:07 +0200

Werner Engelmaier

Mon, 11 Oct 2010 19:59:33 -0400

Phil Bavaro

Mon, 11 Oct 2010 17:08:37 -0700

Joyce Koo

Mon, 11 Oct 2010 20:59:18 -0400

Werner Engelmaier

Mon, 11 Oct 2010 21:20:52 -0400

Werner Engelmaier

Mon, 11 Oct 2010 21:22:08 -0400

Joyce Koo

Mon, 11 Oct 2010 22:46:10 -0400

Stadem, Richard D.

Tue, 12 Oct 2010 11:40:04 -0500

Phil Bavaro

Tue, 12 Oct 2010 10:06:53 -0700

Werner Engelmaier

Tue, 12 Oct 2010 13:32:02 -0400

Stadem, Richard D.

Tue, 12 Oct 2010 12:37:31 -0500

Robert Kondner

Tue, 12 Oct 2010 13:56:58 -0400

Paul Edwards

Tue, 12 Oct 2010 10:59:36 -0700

Werner Engelmaier

Tue, 12 Oct 2010 14:06:29 -0400

Werner Engelmaier

Tue, 12 Oct 2010 14:10:55 -0400

Paul Edwards

Tue, 12 Oct 2010 11:23:35 -0700

Paul Edwards

Tue, 12 Oct 2010 11:26:10 -0700

David D. Hillman

Tue, 12 Oct 2010 14:17:19 -0500

Post, Scott E

Tue, 12 Oct 2010 19:37:12 +0000

Stadem, Richard D.

Tue, 12 Oct 2010 15:15:10 -0500

Paul Edwards

Tue, 12 Oct 2010 13:47:27 -0700

Inge

Tue, 12 Oct 2010 23:10:29 +0200

Stadem, Richard D.

Tue, 12 Oct 2010 16:26:14 -0500

John Burke

Tue, 12 Oct 2010 15:22:02 -0700

Chris Mahanna

Tue, 12 Oct 2010 23:03:15 -0400

John Burke

Tue, 12 Oct 2010 20:15:57 -0700

Tan Geok Ang

Wed, 13 Oct 2010 14:29:44 +0800

Victor Hernandez

Wed, 13 Oct 2010 05:36:30 -0500

Jack Olson

Wed, 13 Oct 2010 13:18:11 -0500

Inge

Thu, 14 Oct 2010 08:38:35 +0200

Jack Olson

Fri, 15 Oct 2010 09:25:34 -0500

Inge

Fri, 15 Oct 2010 18:52:57 +0200

Microsection

Lum Wee Mei

Fri, 1 Oct 2010 22:34:32 +0800

Ian Hanna

Fri, 1 Oct 2010 10:40:51 -0400

Paul Reid

Fri, 1 Oct 2010 11:39:36 -0400

Gabriela

Sat, 2 Oct 2010 10:08:01 +0200

NTC Friday Element Quiz - the Answer

Glidden, Kevin

Mon, 4 Oct 2010 08:44:53 -0400

David D. Hillman

Fri, 15 Oct 2010 15:59:44 -0500

NTC Friday Element Quiz - the Answer

David D. Hillman

Fri, 22 Oct 2010 15:16:37 -0500

NTC Friday Element Quiz - the Question

David D. Hillman

Thu, 14 Oct 2010 07:38:36 -0500

Noel, William J - GS

Thu, 14 Oct 2010 08:51:18 -0400

Bev Christian

Thu, 14 Oct 2010 08:54:22 -0400

Fox, Ian

Thu, 14 Oct 2010 14:08:23 +0100

Graham Naisbitt

Thu, 14 Oct 2010 15:23:43 +0100

Whittaker, Dewey (EHCOE)

Thu, 14 Oct 2010 07:41:35 -0700

Chuck Brummer

Thu, 14 Oct 2010 07:50:13 -0700

Bryon Boone

Thu, 14 Oct 2010 12:45:13 -0400

Ed Popielarski

Thu, 14 Oct 2010 12:21:42 -0700

Phil Bavaro

Thu, 14 Oct 2010 14:41:55 -0700

NTC Friday Element Quiz - the Question

Bryon Boone

Thu, 14 Oct 2010 18:09:57 -0400

David D. Hillman

Thu, 21 Oct 2010 14:00:32 -0500

Steve Gregory

Thu, 21 Oct 2010 15:21:32 -0400

Graham Collins

Thu, 21 Oct 2010 16:22:56 -0300

Woolley, Mark D. (Mark)

Thu, 21 Oct 2010 13:44:54 -0600

Roberts, Jon (SA-1)

Thu, 21 Oct 2010 15:13:48 -0500

Roberts, Jon (SA-1)

Thu, 21 Oct 2010 15:41:50 -0500

David D. Hillman

Thu, 21 Oct 2010 15:50:18 -0500

Bev Christian

Thu, 21 Oct 2010 17:13:22 -0400

Roberts, Jon (SA-1)

Thu, 21 Oct 2010 16:23:42 -0500

Woolley, Mark D. (Mark)

Thu, 21 Oct 2010 15:51:43 -0600

Inge

Fri, 22 Oct 2010 09:09:59 +0200

Eric Christison

Fri, 22 Oct 2010 09:35:34 +0100

Victor Hernandez

Fri, 22 Oct 2010 05:35:23 -0500

Paul Reid

Fri, 22 Oct 2010 08:17:38 -0400

Guy Ramsey

Fri, 22 Oct 2010 09:16:48 -0400

Ed Popielarski

Fri, 22 Oct 2010 12:35:37 -0700

NTC Friday quiz 21

Inge

Fri, 8 Oct 2010 13:07:08 +0200

Steve Gregory

Fri, 15 Oct 2010 07:21:03 -0400

KennyB

Fri, 15 Oct 2010 06:00:17 -0700

Drew meyer

Fri, 15 Oct 2010 08:40:01 -0500

Dharma Kemp-Bresett

Fri, 15 Oct 2010 09:52:56 -0400

Inge

Fri, 15 Oct 2010 16:07:57 +0200

Inge

Fri, 15 Oct 2010 16:09:57 +0200

Inge

Fri, 15 Oct 2010 16:11:47 +0200

Dharma Kemp-Bresett

Fri, 15 Oct 2010 15:36:42 -0400

John Burke

Fri, 15 Oct 2010 12:46:56 -0700

Inge

Fri, 15 Oct 2010 22:04:17 +0200

Inge

Fri, 15 Oct 2010 22:06:26 +0200

Dharma Kemp-Bresett

Fri, 15 Oct 2010 16:09:27 -0400

Phil Bavaro

Fri, 15 Oct 2010 13:43:00 -0700

Inge

Fri, 15 Oct 2010 23:31:13 +0200

John Burke

Fri, 15 Oct 2010 15:22:48 -0700

Brian Ellis

Sat, 16 Oct 2010 11:51:31 +0300

Inge

Sat, 16 Oct 2010 12:06:10 +0200

Brian Ellis

Sat, 16 Oct 2010 14:10:09 +0300

Inge

Sat, 16 Oct 2010 15:23:35 +0200

Inge

Tue, 19 Oct 2010 10:03:03 +0200

Brian Ellis

Tue, 19 Oct 2010 11:12:20 +0300

Drew meyer

Tue, 19 Oct 2010 06:50:04 -0500

Victor Hernandez

Tue, 19 Oct 2010 07:26:09 -0500

Steve Gregory

Tue, 19 Oct 2010 11:17:07 -0400

Ed Popielarski

Tue, 19 Oct 2010 12:34:42 -0700

Stadem, Richard D.

Tue, 19 Oct 2010 16:00:54 -0500

Stadem, Richard D.

Tue, 19 Oct 2010 16:08:51 -0500

Phil Bavaro

Tue, 19 Oct 2010 14:22:30 -0700

Mike Fenner

Wed, 20 Oct 2010 09:02:18 +0100

Inge

Wed, 20 Oct 2010 13:05:25 +0200

Werner Engelmaier

Wed, 20 Oct 2010 07:11:52 -0400

Stewart McCracken

Wed, 20 Oct 2010 11:51:07 +0000

Blair Hogg

Wed, 20 Oct 2010 07:50:43 -0500

Brian Ellis

Wed, 20 Oct 2010 16:03:49 +0300

Mickey Weiner

Wed, 20 Oct 2010 15:03:44 +0200

Reuven Rokah

Wed, 20 Oct 2010 15:09:14 +0200

Stadem, Richard D.

Wed, 20 Oct 2010 08:13:13 -0500

David D. Hillman

Wed, 20 Oct 2010 08:30:20 -0500

Inge

Wed, 20 Oct 2010 15:43:00 +0200

Inge

Wed, 20 Oct 2010 15:52:39 +0200

Steve Gregory

Wed, 20 Oct 2010 09:53:46 -0400

Leland Woodall

Wed, 20 Oct 2010 10:01:01 -0400

Robert DeQuattro

Wed, 20 Oct 2010 10:05:42 -0400

Inge

Wed, 20 Oct 2010 16:05:55 +0200

Bob Landman

Wed, 20 Oct 2010 10:18:09 -0400

Bob Landman

Wed, 20 Oct 2010 10:22:20 -0400

Stadem, Richard D.

Wed, 20 Oct 2010 09:59:44 -0500

KennyB

Wed, 20 Oct 2010 08:11:35 -0700

Steve Gregory

Wed, 20 Oct 2010 11:58:49 -0400

Joyce Koo

Wed, 20 Oct 2010 12:17:14 -0400

Phil Bavaro

Wed, 20 Oct 2010 09:04:04 -0700

Inge

Wed, 20 Oct 2010 18:29:02 +0200

Ahne Oosterhof

Wed, 20 Oct 2010 10:04:35 -0700

Bryon Boone

Wed, 20 Oct 2010 13:09:07 -0400

Steven Creswick

Sun, 24 Oct 2010 11:15:09 -0400

Inge

Sun, 24 Oct 2010 17:56:39 +0200

Steve Gregory

Mon, 25 Oct 2010 09:20:45 -0400

Douglas Pauls

Mon, 25 Oct 2010 08:38:54 -0500

KennyB

Mon, 25 Oct 2010 06:44:54 -0700

Victor Hernandez

Mon, 25 Oct 2010 09:22:10 -0500

Inge

Mon, 25 Oct 2010 18:50:34 +0200

NTC Friday quiz 22

Inge

Thu, 21 Oct 2010 23:04:25 +0200

Steve Gregory

Fri, 22 Oct 2010 07:29:52 -0400

Werner Engelmaier

Fri, 22 Oct 2010 08:07:45 -0400

Blair Hogg

Fri, 22 Oct 2010 07:25:49 -0500

Inge

Fri, 22 Oct 2010 14:31:37 +0200

Inge

Fri, 22 Oct 2010 14:35:04 +0200

Inge

Fri, 22 Oct 2010 14:37:06 +0200

Steve Gregory

Fri, 22 Oct 2010 10:30:02 -0400

Alasdair Naisbitt

Fri, 22 Oct 2010 18:09:40 +0100

Inge

Fri, 22 Oct 2010 20:02:47 +0200

Ian Hanna

Fri, 22 Oct 2010 14:08:19 -0400

Dharma Kemp-Bresett

Fri, 22 Oct 2010 14:13:09 -0400

Joyce Koo

Fri, 22 Oct 2010 14:15:54 -0400

Dharma Kemp-Bresett

Fri, 22 Oct 2010 14:25:17 -0400

Werner Engelmaier

Fri, 22 Oct 2010 14:24:03 -0400

Wrobel, Clayton (SA-1)

Fri, 22 Oct 2010 14:42:29 -0400

Wrobel, Clayton (SA-1)

Fri, 22 Oct 2010 14:44:23 -0400

Ed Popielarski

Fri, 22 Oct 2010 12:29:38 -0700

NTC Friday quiz 22, the correct answers

Graham Naisbitt

Fri, 22 Oct 2010 20:53:37 +0100

Re: NTC Friday quiz 22, the correct answers

Inge

Sat, 23 Oct 2010 13:07:20 +0200

Re: NTC Friday quiz 22, the correct answers

Joyce Koo

Sat, 23 Oct 2010 08:59:41 -0400

NTC RE: [TN] Want to buy electrolytic copper foil

Bev Christian

Wed, 20 Oct 2010 16:29:11 -0400

Re: NTC RE: [TN] Want to buy electrolytic copper foil

Stadem, Richard D.

Wed, 20 Oct 2010 16:28:56 -0500

Re: NTC RE: [TN] Want to buy electrolytic copper foil

Phil Bavaro

Wed, 20 Oct 2010 14:31:36 -0700

Re: NTC RE: [TN] Want to buy electrolytic copper foil

Gerald Gagnon

Thu, 21 Oct 2010 09:17:21 -0400

NTC: Friday quiz 19

Steve Gregory

Fri, 1 Oct 2010 08:21:29 -0400

Keith Calhoun

Fri, 1 Oct 2010 08:37:56 -0400

Brian Ellis

Fri, 1 Oct 2010 15:53:27 +0300

Steven Creswick

Fri, 1 Oct 2010 12:24:25 -0400

Ahne Oosterhof

Fri, 1 Oct 2010 09:28:14 -0700

Genny Gibbard

Fri, 1 Oct 2010 10:59:28 -0600

Paul Reid

Fri, 1 Oct 2010 13:21:49 -0400

Inge

Fri, 1 Oct 2010 19:22:55 +0200

Inge

Fri, 1 Oct 2010 19:25:04 +0200

Inge

Fri, 1 Oct 2010 19:28:14 +0200

Dharma Kemp-Bresett

Fri, 1 Oct 2010 13:29:48 -0400

Inge

Fri, 1 Oct 2010 19:32:08 +0200

Inge

Fri, 1 Oct 2010 19:40:54 +0200

Inge

Fri, 1 Oct 2010 20:43:50 +0200

Andrew Shieh

Fri, 1 Oct 2010 15:45:11 -0400

Inge

Fri, 1 Oct 2010 21:57:48 +0200

Inge

Fri, 1 Oct 2010 21:59:41 +0200

Steve Gregory

Fri, 1 Oct 2010 15:59:23 -0400

Andrew Shieh

Fri, 1 Oct 2010 16:19:36 -0400

Bryon Boone

Fri, 1 Oct 2010 16:59:52 -0400

Inge

Fri, 1 Oct 2010 23:20:09 +0200

Inge

Sat, 2 Oct 2010 00:11:38 +0200

NTC: Friday quiz 23

Inge

Thu, 28 Oct 2010 09:51:57 +0200

Douglas Pauls

Thu, 28 Oct 2010 06:46:55 -0500

Victor Hernandez

Thu, 28 Oct 2010 07:34:29 -0500

Steve Gregory

Thu, 28 Oct 2010 10:09:43 -0400

Genny Gibbard

Thu, 28 Oct 2010 08:56:03 -0600

Bruce Tostevin

Thu, 28 Oct 2010 11:03:31 -0400

Jeff Popp

Thu, 28 Oct 2010 11:09:38 -0400

Paul Reid

Thu, 28 Oct 2010 11:44:54 -0400

KennyB

Thu, 28 Oct 2010 08:49:44 -0700

KennyB

Thu, 28 Oct 2010 08:53:28 -0700

Dharma Kemp-Bresett

Thu, 28 Oct 2010 11:54:57 -0400

Glidden, Kevin

Thu, 28 Oct 2010 11:56:46 -0400

Inge

Thu, 28 Oct 2010 18:09:52 +0200

Steven Creswick

Thu, 28 Oct 2010 12:15:36 -0400

Graham Naisbitt

Thu, 28 Oct 2010 17:18:35 +0100

Joe Venditti

Thu, 28 Oct 2010 12:54:51 -0400

McGlaughlin, Jeffrey A

Thu, 28 Oct 2010 12:57:57 -0400

Drew meyer

Thu, 28 Oct 2010 12:04:56 -0500

Drew meyer

Thu, 28 Oct 2010 15:15:03 -0500

Genny Gibbard

Thu, 28 Oct 2010 14:43:37 -0600

KennyB

Thu, 28 Oct 2010 16:18:18 -0700

Hetal Shah

Thu, 28 Oct 2010 20:40:10 -0400

NTC: Friday quiz 23 time to give the answer

Blair Hogg

Fri, 29 Oct 2010 08:46:27 -0500

Re: NTC: Friday quiz 23 time to give the answer

Inge

Fri, 29 Oct 2010 22:16:07 +0200

Pad to Pad ratio, BGA solder bump

Victor Hernandez

Wed, 20 Oct 2010 11:04:56 -0500

Re: Pad to Pad ratio, BGA solder bump

Werner Engelmaier

Wed, 20 Oct 2010 16:45:57 -0400

paste and conformal coating compatibility

Chris Mahanna

Thu, 28 Oct 2010 22:59:36 -0400

PCB suppliers ranking

Ray Kong

Thu, 28 Oct 2010 11:18:21 -0700

Re: PCB suppliers ranking

Sharon Starr

Fri, 29 Oct 2010 12:06:47 -0500

Re: PCB suppliers ranking

Fri, 29 Oct 2010 17:18:32 +0000

Re: PCB suppliers ranking

Ray Kong

Fri, 29 Oct 2010 15:46:54 -0700

pick and place /board deflection

Hart, Dale L CTR USAF AFMC AFRL/RXSA

Mon, 4 Oct 2010 14:26:04 -0400

Paul Edwards

Mon, 4 Oct 2010 11:39:04 -0700

Phil Bavaro

Mon, 4 Oct 2010 11:44:14 -0700

Stadem, Richard D.

Mon, 4 Oct 2010 13:46:55 -0500

Robert Kondner

Mon, 4 Oct 2010 15:59:09 -0400

Mike Fenner

Tue, 5 Oct 2010 10:34:15 +0100

Re: Press Pin Fits connector

John Goulet

Thu, 7 Oct 2010 14:59:13 +0000

plating projections

Pradeep Menon

Fri, 22 Oct 2010 20:10:43 +0530

Re: plating projections

Paul Edwards

Fri, 22 Oct 2010 09:11:02 -0700

Press Pin Fits connector

Victor Hernandez

Fri, 22 Oct 2010 08:46:06 -0500

Lee Parker

Fri, 22 Oct 2010 15:30:42 -0400

Re: Press Pin Fits connector

Robert Kondner

Fri, 22 Oct 2010 18:47:15 -0400

Re: Press Pin Fits connector

Dwight Mattix

Fri, 22 Oct 2010 17:32:37 -0700

profile (section) of outside layer trace

Mark Larson

Thu, 28 Oct 2010 09:01:30 -0500

Joyce Koo

Thu, 28 Oct 2010 10:14:21 -0400

Mark Larson

Thu, 28 Oct 2010 09:48:51 -0500

Dan Skweres

Thu, 28 Oct 2010 11:02:29 -0400

PTH reliability - pad to surface trace

Dennis Fritz

Thu, 28 Oct 2010 12:42:10 -0400

Glidden, Kevin

Tue, 5 Oct 2010 15:02:13 -0400

Victor Hernandez

Tue, 5 Oct 2010 14:09:08 -0500

Glidden, Kevin

Tue, 5 Oct 2010 15:33:16 -0400

Werner Engelmaier

Tue, 5 Oct 2010 16:03:34 -0400

Paul Reid

Tue, 5 Oct 2010 18:00:47 -0400

Jack Olson

Wed, 6 Oct 2010 20:37:22 -0500

Glidden, Kevin

Thu, 7 Oct 2010 08:27:29 -0400

Kenneth Wood

Thu, 7 Oct 2010 08:28:18 -0400

Jack Olson

Thu, 7 Oct 2010 10:03:51 -0500

Ian Hanna

Thu, 7 Oct 2010 11:15:19 -0400

Questions

Noel, William J - GS

Mon, 4 Oct 2010 12:38:38 -0400

Glidden, Kevin

Mon, 4 Oct 2010 13:27:19 -0400

Glidden, Kevin

Mon, 4 Oct 2010 13:28:46 -0400

Noel, William J - GS

Mon, 4 Oct 2010 13:54:09 -0400

Stadem, Richard D.

Mon, 4 Oct 2010 12:57:59 -0500

Gregg Owens

Mon, 4 Oct 2010 11:24:39 -0700

Stadem, Richard D.

Mon, 4 Oct 2010 13:45:26 -0500

Chris Mahanna

Tue, 5 Oct 2010 08:45:14 -0400

rental of Cu plating thickness gage

Jack Olson

Tue, 5 Oct 2010 10:06:57 -0500

R: [TN] specifying bevel

Gabriele Sala

Sat, 2 Oct 2010 09:49:52 +0200

Louis Hart

Tue, 12 Oct 2010 19:17:52 -0400

Required solvent for IPC-TM-650, Method 2.3.4

Bev Christian

Thu, 28 Oct 2010 15:11:18 -0400

R Sedlak

Thu, 28 Oct 2010 13:33:58 -0700

Bev Christian

Thu, 28 Oct 2010 16:55:52 -0400

R Sedlak

Thu, 28 Oct 2010 13:57:26 -0700

Charlie Pitarys

Thu, 28 Oct 2010 16:12:37 -0500

Chris Mahanna

Thu, 28 Oct 2010 18:52:46 -0400

Bev Christian

Thu, 28 Oct 2010 21:35:00 -0400

R Sedlak

Fri, 29 Oct 2010 09:12:14 -0700

Sn/Pb plating from MSA type bath

Chris Mahanna

Fri, 29 Oct 2010 14:12:58 -0400

RFID TAGS QUESTION

Roberts, Jon (SA-1)

Tue, 19 Oct 2010 14:11:39 -0500

Re: RFID TAGS QUESTION

Richard Hatano

Tue, 19 Oct 2010 14:51:33 -0700

SMT Devices

Noel, William J - GS

Tue, 19 Oct 2010 09:23:08 -0400

Re: SMT Devices

Stadem, Richard D.

Tue, 19 Oct 2010 08:51:58 -0500

Jana Carraway

Tue, 5 Oct 2010 14:52:10 -0700

Solder wicking up on the leads of Kyocera connector

Ioan Tempea

Wed, 6 Oct 2010 16:06:17 -0400

Re: Solder wicking up on the leads of Kyocera connector

Victor Hernandez

Wed, 6 Oct 2010 15:20:10 -0500

Re: Solder wicking up on the leads of Kyocera connector

Ioan Tempea

Wed, 6 Oct 2010 16:31:07 -0400

Re: Solder wicking up on the leads of Kyocera connector

Werner Engelmaier

Wed, 6 Oct 2010 16:42:02 -0400

Re: Solder wicking up on the leads of Kyocera connector

John Goulet

Thu, 7 Oct 2010 14:32:27 +0000

Soldering a flex to a ceramic wafer

Graham Collins

Tue, 19 Oct 2010 11:17:24 -0300

John Burke

Tue, 19 Oct 2010 07:22:24 -0700

David D. Hillman

Tue, 19 Oct 2010 09:42:51 -0500

Inge

Tue, 19 Oct 2010 18:27:13 +0200

Sorting type of Stainless Steel

Steven Creswick

Sun, 24 Oct 2010 11:15:09 -0400

Re: Sorting type of Stainless Steel

Steven Creswick

Tue, 5 Oct 2010 06:48:40 -0400

specifying bevel

Louis Hart

Fri, 1 Oct 2010 19:42:07 -0400

Re: specifying bevel

Bryon Boone

Fri, 1 Oct 2010 20:02:03 -0400

storage of electronic components

Mark Larson

Fri, 15 Oct 2010 09:28:00 -0500

Storage of parts, side question

Inge

Fri, 15 Oct 2010 23:27:02 +0200

Re: Storage of parts, side question

Paul Edwards

Fri, 15 Oct 2010 14:38:14 -0700

Re: Storage of parts, side question

Inge

Sat, 16 Oct 2010 01:07:57 +0200

test

Luis A. Gallegos

Tue, 12 Oct 2010 15:52:02 -0500

Re: test

Joyce Koo

Tue, 12 Oct 2010 17:27:45 -0400

Test

Ragesh

Wed, 13 Oct 2010 10:49:44 +0530

thermal relief calculator

Marcel van den Berk

Mon, 11 Oct 2010 09:44:06 +0200

Re: thermal relief calculator

Joyce Koo

Mon, 11 Oct 2010 04:48:00 -0400

Re: thermal relief calculator

Julie Silk

Tue, 12 Oct 2010 15:14:00 -0500

Underfill question

Bev Christian

Thu, 14 Oct 2010 15:27:21 -0400

Werner Engelmaier

Thu, 14 Oct 2010 15:41:18 -0400

David D. Hillman

Thu, 14 Oct 2010 14:48:19 -0500

Inge

Thu, 14 Oct 2010 23:02:44 +0200

Bev Christian

Thu, 14 Oct 2010 17:04:05 -0400

Inge

Thu, 14 Oct 2010 23:14:46 +0200

Unusual Au ball bond

Victor Hernandez

Wed, 27 Oct 2010 08:01:09 -0500

Re: Unusual Au ball bond

Steve Gregory

Wed, 27 Oct 2010 10:13:52 -0400

Re: Unusual Au ball bond

Joyce Koo

Wed, 27 Oct 2010 10:22:43 -0400

Re: Unusual Au ball bond

Thayer, Wayne - IIW

Wed, 27 Oct 2010 10:40:51 -0400

Used Equipment Brokers

Jana Carraway

Fri, 29 Oct 2010 08:50:12 -0700

Inge

Fri, 29 Oct 2010 17:53:39 +0200

Steve Gregory

Fri, 29 Oct 2010 11:55:19 -0400

Joyce Koo

Fri, 29 Oct 2010 12:04:58 -0400

Vented BGA Flip-Chip FPGA versus post soldering cleaning

Victor Hernandez

Fri, 29 Oct 2010 14:07:14 -0500

Bogert, Gerald L

Thu, 14 Oct 2010 09:51:34 -0400

Want to buy electrolytic copper foil

Bev Christian

Wed, 20 Oct 2010 14:26:20 -0400

Ian Hanna

Wed, 20 Oct 2010 14:52:17 -0400

Dennis Fritz

Wed, 20 Oct 2010 15:33:53 -0400

Douglas Pauls

Wed, 20 Oct 2010 15:27:07 -0500

Werner Engelmaier

Wed, 20 Oct 2010 17:58:01 -0400

Bev Christian

Thu, 21 Oct 2010 12:31:02 -0400

Werner Engelmaier

Thu, 21 Oct 2010 12:42:00 -0400

Bryon Boone

Thu, 21 Oct 2010 20:59:00 -0400

Bev Christian

Thu, 21 Oct 2010 21:07:28 -0400

Wolfgang Erat

Fri, 22 Oct 2010 01:04:30 +0000

Washing boards

Yannick Brisson

Wed, 27 Oct 2010 13:41:51 -0400

Joyce Koo

Wed, 27 Oct 2010 13:45:14 -0400

Douglas Pauls

Wed, 27 Oct 2010 13:01:59 -0500

Joyce Koo

Wed, 27 Oct 2010 14:03:56 -0400

Douglas Pauls

Wed, 27 Oct 2010 13:09:23 -0500

Bob Landman

Wed, 27 Oct 2010 14:44:19 -0400

Steve Gregory

Wed, 27 Oct 2010 15:13:56 -0400

Paul Edwards

Wed, 27 Oct 2010 16:38:06 -0700

Brian Ellis

Thu, 28 Oct 2010 09:34:42 +0300