TECHNET Archives

April 2009

TechNet@IPC.ORG
Options: Hide Table of Contents

Actel QFN180 Assembly (6 Messages)
Another Bev survey (1 Message)
Bad resistors (4 Messages)
Cable assembly (4 Messages)
Cable Shield (4 Messages)
Cable Shielding (4 Messages)
CAM position (1 Message)
Chemical resistance ENIG (1 Message)
Component stacking (5 Messages)
computer questioin (11 Messages)
Copper conductors (7 Messages)
Copper repair (2 Messages)
Decoupling Performance Class and Quality Assurance testing? (3 Messages)
Determining Root Cause (13 Messages)
Do we have a UL R/C PWB? (4 Messages)
DYMAX ADHESIVES (1 Message)
Edge connector repair (6 Messages)
Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG) (9 Messages)
European Union Council Directive 80/181/EEC (Metric Dire ctive) (5 Messages)
European Union Council Directive 80/181/EEC (Metric Directive) (13 Messages)
European Union Council Directive 80/181/EEC (Metric Directive) - NTC (12 Messages)
Friday Theorizing (14 Messages)
General requirements for Radiation Equipment (3 Messages)
GM & Chrysler Out of NASCAR (4 Messages)
Gold/Tin Intermetallics, why are we afraid? (60 Messages)
Hand Sanitizer and PCB Assembly (39 Messages)
Hand Sanitizer and PCB Assembly NTC (1 Message)
Help me - NC pin without pad on the pcb (2 Messages)
Implementing Class 3 assembly processes (6 Messages)
Info on dry-film tenting of vias, both sides (1 Message)
Info on LPI tenting of vias, both sides (8 Messages)
Info PCB Design for High Current / Short Duration Pulse (4 Messages)
Interesting test regime for handsets (3 Messages)
IPC 6013B (2 Messages)
IPC APEX/EXPO (1 Message)
IPC-A-610 Flux Residues 10.4.1 (2 Messages)
IPC/EIA-J-STD 002 Steam Ageing (6 Messages)
Lead Free Reworking of Multilayer Ceramic Capacitors (5 Messages)
LGA acceptance (2 Messages)
LGAs in a military environment? (34 Messages)
Mystery Connector (7 Messages)
New technique------USB 3.0 (1 Message)
Nikon microscope camera DXM-1200 (2 Messages)
Nitrogen use for selective soldering equipment (3 Messages)
NPTH or PTH? (3 Messages)
NTC - [TN] Gold/Tin Intermetallics, why are we afraid? (13 Messages)
NTC GM & Chrysler Out of NASCAR (1 Message)
NTC RE: GM & Chrysler Out of NASCAR (2 Messages)
NTC RE: [TN] Hand Sanitizer and PCB Assembly (1 Message)
NTC: Some good news for someone finally! (4 Messages)
NTC? SI vs imperial, cont. (5 Messages)
OSP damage (2 Messages)
PCB Failure analysis (9 Messages)
Plating on screws (18 Messages)
Plating over metal (5 Messages)
Pre-printed shrink tubing (2 Messages)
PTF Technology (2 Messages)
Roll-to-Roll Research (11 Messages)
Second time reflow of PoP on bottom side of PCBA (4 Messages)
Solder Ball Problem (9 Messages)
solder fatigue analysis for slowly changing thermal envi ronment (1 Message)
solder fatigue analysis for slowly changing thermal environment (10 Messages)
Solder Paste In the Solder Pot (11 Messages)
Solderability fluxes (1 Message)
Solvent for cured cyanoacrylate adhesive (11 Messages)
STATIC DISSIPATIVE COATINGS (7 Messages)
Stencil Life (3 Messages)
Straddle mount connector at SMT (5 Messages)
Test (1 Message)
TH lead forming machines (6 Messages)
The effects of vibration on SMT part overhang (3 Messages)
threaded fastener selection guide (7 Messages)
Traces and vias under components (1 Message)
Video: Surprise fun in Antwerp train station (3 Messages)
when do vias require a thermal relief (7 Messages)
Wire Crimps: Machine Vs Hand Tool Specs (5 Messages)
Zinc Plating and whiskers (2 Messages)
[DC] when do vias require a thermal relief (2 Messages)
[TN] Gold/Tin Intermetallics, why are we afraid? (1 Message)
[TN] Help me - NC pin without pad on the pcb (1 Message)

Subject Sorted by Subject, Chronologically

From

Date
New Thread Actel QFN180 Assembly
Re: Actel QFN180 Assembly
Thayer, Wayne
Thu, 30 Apr 2009 11:37:29 -0400
Re: Actel QFN180 Assembly
bob wettermann
Thu, 30 Apr 2009 03:17:17 -0700
Re: Actel QFN180 Assembly
Tan Geok Ang
Thu, 30 Apr 2009 09:07:52 +0800
Re: Actel QFN180 Assembly
Stadem, Richard D.
Wed, 29 Apr 2009 15:11:30 -0500
Re: Actel QFN180 Assembly
Steve Gregory
Wed, 29 Apr 2009 14:31:32 -0500
Actel QFN180 Assembly
Steve Gregory
Wed, 29 Apr 2009 10:10:54 -0500
New Thread Another Bev survey
Another Bev survey
Bev Christian
Thu, 16 Apr 2009 10:23:55 -0400
New Thread Bad resistors
Re: Bad resistors
Thayer, Wayne
Mon, 20 Apr 2009 08:31:21 -0400
Re: Bad resistors
Jim Carlson
Mon, 20 Apr 2009 06:26:17 -0500
Re: Bad resistors
John Goulet
Sun, 19 Apr 2009 17:10:35 +0000
Bad resistors
Thayer, Wayne
Wed, 15 Apr 2009 14:54:15 -0400
New Thread Cable assembly
Re: Cable assembly
Joyce Koo
Mon, 13 Apr 2009 06:19:48 -0400
Re: Cable assembly
Liu, Edwin
Mon, 13 Apr 2009 17:08:39 +0800
Re: Cable assembly
Inge
Mon, 13 Apr 2009 10:58:38 +0200
Re: Cable assembly
Liu, Edwin
Mon, 13 Apr 2009 16:42:50 +0800
New Thread Cable Shield
Re: Cable Shield
Phil Nutting
Thu, 30 Apr 2009 16:06:14 -0400
Re: Cable Shield
Mike Sewell
Thu, 30 Apr 2009 14:47:41 -0500
Re: Cable Shield
Ahne Oosterhof
Thu, 30 Apr 2009 12:41:44 -0700
Cable Shield
Mike Sewell
Wed, 29 Apr 2009 11:57:19 -0500
New Thread Cable Shielding
Re: Cable Shielding
Inge
Thu, 30 Apr 2009 21:13:15 +0200
Re: Cable Shielding
Douglas Erb
Thu, 30 Apr 2009 11:47:14 -0700
Re: Cable Shielding
Stadem, Richard D.
Thu, 30 Apr 2009 13:26:23 -0500
Cable Shielding
Mike Sewell
Thu, 30 Apr 2009 13:12:16 -0500
New Thread CAM position
CAM position
Louis Hart
Thu, 9 Apr 2009 18:39:55 -0400
New Thread Chemical resistance ENIG
Chemical resistance ENIG
Anil kher
Sat, 4 Apr 2009 12:07:10 +0530
New Thread Component stacking
Re: Component stacking
??
Mon, 27 Apr 2009 21:51:54 +0800
Re: Component stacking
Guy Ramsey
Mon, 27 Apr 2009 06:17:45 -0400
Re: Component stacking
John Goulet
Sun, 26 Apr 2009 13:48:25 +0000
Re: Component stacking
Bev Christian
Fri, 24 Apr 2009 18:40:03 -0400
Component stacking
Cindy S. Bohler
Fri, 24 Apr 2009 17:35:07 -0500
New Thread computer questioin
Re: computer questioin
Stadem, Richard D.
Tue, 7 Apr 2009 08:43:36 -0500
Re: computer questioin
Ted Tontis
Tue, 7 Apr 2009 08:32:31 -0500
Re: computer questioin
Hernefjord Ingemar
Tue, 7 Apr 2009 11:50:16 +0200
Re: computer questioin
李义
Tue, 7 Apr 2009 16:37:32 +0800
Re: computer questioin
Inge
Mon, 6 Apr 2009 23:55:03 +0200
Re: computer questioin
Inge
Mon, 6 Apr 2009 23:38:32 +0200
Re: computer questioin
Matthias Mansfeld
Mon, 6 Apr 2009 23:05:08 +0200
Re: computer questioin
Ted Tontis
Mon, 6 Apr 2009 16:01:52 -0500
Re: computer questioin
John Foster
Mon, 6 Apr 2009 13:49:43 -0700
Re: computer questioin
Inge
Mon, 6 Apr 2009 22:34:15 +0200
computer questioin
Inge
Mon, 6 Apr 2009 22:26:37 +0200
New Thread Copper conductors
Re: Copper conductors
Blair Hogg
Wed, 1 Apr 2009 15:36:02 -0500
Re: Copper conductors
Temkin, Gregg
Wed, 1 Apr 2009 12:27:54 -0700
Re: Copper conductors
Blair Hogg
Wed, 1 Apr 2009 07:35:51 -0500
Re: Copper conductors
Blair Hogg
Wed, 1 Apr 2009 06:52:20 -0500
Re: Copper conductors
Ian Hanna
Wed, 1 Apr 2009 14:29:20 -0400
Re: Copper conductors
Joyce Koo
Wed, 1 Apr 2009 14:15:46 -0400
Copper conductors
Brian Ellis
Wed, 1 Apr 2009 10:13:33 +0300
New Thread Copper repair
Re: Copper repair
James Mahoney
Fri, 3 Apr 2009 13:21:00 -0400
Copper repair
Rolfe, David
Fri, 3 Apr 2009 13:17:36 -0400
New Thread Decoupling Performance Class and Quality Assurance testing?
Re: Decoupling Performance Class and Quality Assurance testing?
Werner Engelmaier /*
Wed, 8 Apr 2009 15:44:23 -0400
Re: Decoupling Performance Class and Quality Assurance testing?
Stadem, Richard D.
Wed, 8 Apr 2009 13:37:47 -0500
Decoupling Performance Class and Quality Assurance testing?
David Bergman
Wed, 8 Apr 2009 13:16:55 -0500
New Thread Determining Root Cause
Re: Determining Root Cause
John Burke
Fri, 17 Apr 2009 08:35:12 -0700
Re: Determining Root Cause
Guy Ramsey
Fri, 17 Apr 2009 10:01:41 -0400
Re: Determining Root Cause
Dean Stadem
Fri, 17 Apr 2009 07:26:18 -0500
Re: Determining Root Cause
Guy Ramsey
Fri, 17 Apr 2009 07:30:23 -0400
Re: Determining Root Cause
Marsal Tampubolon
Fri, 17 Apr 2009 13:45:34 +0700
Re: Determining Root Cause
Ted Tontis
Thu, 16 Apr 2009 16:40:25 -0500
Re: Determining Root Cause
Stadem, Richard D.
Thu, 16 Apr 2009 16:28:49 -0500
Re: Determining Root Cause
David D. Hillman
Thu, 16 Apr 2009 16:26:48 -0500
Re: Determining Root Cause
Paul Edwards
Thu, 16 Apr 2009 14:22:56 -0700
Re: Determining Root Cause
Whittaker, Dewey (EHCOE)
Thu, 16 Apr 2009 14:14:27 -0700
Re: Determining Root Cause
Bev Christian
Thu, 16 Apr 2009 17:09:54 -0400
Re: Determining Root Cause
Stadem, Richard D.
Thu, 16 Apr 2009 16:07:49 -0500
Determining Root Cause
bob wettermann
Thu, 16 Apr 2009 13:59:35 -0700
New Thread Do we have a UL R/C PWB?
Re: Do we have a UL R/C PWB?
Bush, Jeffrey D. (US SSA)
Mon, 6 Apr 2009 16:16:29 -0400
Re: Do we have a UL R/C PWB?
Robert Kondner
Fri, 3 Apr 2009 13:45:57 -0400
Re: Do we have a UL R/C PWB?
Dale Ritzen
Fri, 3 Apr 2009 09:59:30 -0500
Do we have a UL R/C PWB?
Lenny Carter
Fri, 3 Apr 2009 10:53:34 -0400
New Thread DYMAX ADHESIVES
DYMAX ADHESIVES
Lee Whiteman
Wed, 8 Apr 2009 16:47:32 -0400
New Thread Edge connector repair
Re: Edge connector repair
John Goulet
Sun, 19 Apr 2009 16:06:44 +0000
Re: Edge connector repair
Gary Camac
Fri, 3 Apr 2009 13:58:42 -0500
Re: Edge connector repair
Dennis Fritz
Fri, 3 Apr 2009 13:07:28 -0400
Re: Edge connector repair
Peter Vigneau
Fri, 3 Apr 2009 13:04:46 -0400
Re: Edge connector repair
James Mahoney
Fri, 3 Apr 2009 12:43:58 -0400
Edge connector repair
Gary Camac
Fri, 3 Apr 2009 11:38:46 -0500
New Thread Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Re: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
George Milad
Sun, 26 Apr 2009 15:22:08 EDT
Re: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Whittaker, Dewey (EHCOE)
Fri, 24 Apr 2009 07:06:04 -0700
Re: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Mike Fenner
Fri, 24 Apr 2009 12:08:47 +0100
Re: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Wenger, George M.
Fri, 24 Apr 2009 05:59:23 -0400
Re: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
David D. Hillman
Thu, 23 Apr 2009 22:40:39 -0500
Re: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Stadem, Richard D.
Thu, 23 Apr 2009 15:52:08 -0500
Re: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Lee Whiteman
Thu, 23 Apr 2009 15:51:51 -0400
Re: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Steven Creswick
Thu, 23 Apr 2009 15:49:52 -0400
Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Lee Whiteman
Thu, 23 Apr 2009 14:11:01 -0400
New Thread European Union Council Directive 80/181/EEC (Metric Dire ctive)
Re: European Union Council Directive 80/181/EEC (Metric Dire ctive)
Ken Bloomquist
Tue, 14 Apr 2009 08:20:15 -0800
Re: European Union Council Directive 80/181/EEC (Metric Dire ctive)
Graham Collins
Tue, 14 Apr 2009 13:10:35 -0300
Re: European Union Council Directive 80/181/EEC (Metric Dire ctive)
Phil Nutting
Tue, 14 Apr 2009 12:03:35 -0400
Re: European Union Council Directive 80/181/EEC (Metric Dire ctive)
Stadem, Richard D.
Tue, 14 Apr 2009 10:52:54 -0500
Re: European Union Council Directive 80/181/EEC (Metric Dire ctive)
Ken Bloomquist
Tue, 14 Apr 2009 07:46:04 -0800
New Thread European Union Council Directive 80/181/EEC (Metric Directive)
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Brian Ellis
Fri, 17 Apr 2009 08:42:33 +0300
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Brian Ellis
Thu, 16 Apr 2009 18:35:57 +0300
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Brian Ellis
Thu, 16 Apr 2009 11:16:34 +0300
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Joyce Koo
Tue, 14 Apr 2009 12:23:42 -0400
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Stadem, Richard D.
Tue, 14 Apr 2009 11:09:25 -0500
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Joe Fjelstad
Tue, 14 Apr 2009 11:51:41 EDT
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Stadem, Richard D.
Tue, 14 Apr 2009 10:50:40 -0500
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Ahne Oosterhof
Tue, 14 Apr 2009 08:43:18 -0700
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Mike Fenner
Tue, 14 Apr 2009 16:16:20 +0100
Re: European Union Council Directive 80/181/EEC (Metric Directive)
bob wettermann
Tue, 14 Apr 2009 07:35:56 -0700
Re: European Union Council Directive 80/181/EEC (Metric Directive)
Stadem, Richard D.
Tue, 14 Apr 2009 07:01:03 -0500
Re: European Union Council Directive 80/181/EEC (Metric Directive)
John Burke
Mon, 13 Apr 2009 15:22:10 -0700
European Union Council Directive 80/181/EEC (Metric Directive)
Phil Nutting
Mon, 13 Apr 2009 15:20:07 -0400
New Thread European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Inge
Tue, 14 Apr 2009 22:28:51 +0200
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Werner Engelmaier /*
Tue, 14 Apr 2009 16:06:03 -0400
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Inge
Tue, 14 Apr 2009 21:59:55 +0200
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Inge
Tue, 14 Apr 2009 21:54:08 +0200
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Werner Engelmaier /*
Tue, 14 Apr 2009 15:39:13 -0400
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Steven Creswick
Tue, 14 Apr 2009 15:30:38 -0400
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Lee Whiteman
Tue, 14 Apr 2009 15:10:07 -0400
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Joe Fjelstad
Tue, 14 Apr 2009 14:54:06 EDT
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Inge
Tue, 14 Apr 2009 20:19:57 +0200
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Lee Whiteman
Tue, 14 Apr 2009 13:00:50 -0400
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Joe Fjelstad
Tue, 14 Apr 2009 12:02:52 EDT
Re: European Union Council Directive 80/181/EEC (Metric Directive) - NTC
Steven Creswick
Tue, 14 Apr 2009 11:54:59 -0400
New Thread Friday Theorizing
Re: Friday Theorizing
Stadem, Richard D.
Mon, 13 Apr 2009 09:01:04 -0500
Re: Friday Theorizing
Bev Christian
Fri, 10 Apr 2009 18:25:33 -0400
Re: Friday Theorizing
Inge
Fri, 10 Apr 2009 22:19:13 +0200
Re: Friday Theorizing
bob wettermann
Fri, 10 Apr 2009 08:16:13 -0700
Re: Friday Theorizing
Richard Stadem
Fri, 10 Apr 2009 08:58:26 -0500
Re: Friday Theorizing
Thayer, Wayne
Thu, 9 Apr 2009 15:14:44 -0400
Re: Friday Theorizing
R Sedlak
Thu, 9 Apr 2009 12:05:43 -0700
Re: Friday Theorizing
Inge
Thu, 9 Apr 2009 20:07:23 +0200
Re: Friday Theorizing
Stadem, Richard D.
Thu, 9 Apr 2009 12:41:49 -0500
Re: Friday Theorizing
bob wettermann
Thu, 9 Apr 2009 10:08:15 -0700
Re: Friday Theorizing
Inge
Thu, 9 Apr 2009 18:15:28 +0200
Re: Friday Theorizing
Steven Creswick
Thu, 9 Apr 2009 12:11:48 -0400
Re: Friday Theorizing
Inge
Thu, 9 Apr 2009 18:01:51 +0200
Friday Theorizing
bob wettermann
Thu, 9 Apr 2009 08:17:08 -0700
New Thread General requirements for Radiation Equipment
Re: General requirements for Radiation Equipment
Stadem, Richard D.
Thu, 23 Apr 2009 13:12:50 -0500
Re: General requirements for Radiation Equipment
Ahne Oosterhof
Thu, 23 Apr 2009 10:39:51 -0700
General requirements for Radiation Equipment
Stadem, Richard D.
Tue, 21 Apr 2009 11:02:03 -0500
New Thread GM & Chrysler Out of NASCAR
Re: GM & Chrysler Out of NASCAR
Dale Ritzen
Wed, 1 Apr 2009 07:42:09 -0500
Re: GM & Chrysler Out of NASCAR
Stewart, Dougal
Wed, 1 Apr 2009 13:37:01 +0100
Re: GM & Chrysler Out of NASCAR
Dale Ritzen
Wed, 1 Apr 2009 07:24:37 -0500
GM & Chrysler Out of NASCAR
Steve Gregory
Wed, 1 Apr 2009 07:03:21 -0500
New Thread Gold/Tin Intermetallics, why are we afraid?
Re: Gold/Tin Intermetallics, why are we afraid?
Chris Mahanna
Thu, 16 Apr 2009 22:27:36 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Wenger, George M.
Thu, 16 Apr 2009 19:01:34 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Chris Mahanna
Thu, 16 Apr 2009 17:37:16 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Joyce Koo
Thu, 16 Apr 2009 15:48:50 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Stadem, Richard D.
Thu, 16 Apr 2009 14:44:52 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
David D. Hillman
Thu, 16 Apr 2009 14:31:59 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
Ian Hanna
Thu, 16 Apr 2009 10:21:16 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Douglas Pauls
Wed, 15 Apr 2009 16:53:03 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
Werner Engelmaier /*
Wed, 15 Apr 2009 17:44:58 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Joyce Koo
Wed, 15 Apr 2009 17:33:35 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Wenger, George M.
Wed, 15 Apr 2009 17:31:10 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Werner Engelmaier /*
Wed, 15 Apr 2009 17:29:59 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Joyce Koo
Wed, 15 Apr 2009 17:11:16 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Werner Engelmaier /*
Wed, 15 Apr 2009 16:33:47 EDT
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 16:33:28 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Joyce Koo
Wed, 15 Apr 2009 16:26:34 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Thayer, Wayne
Wed, 15 Apr 2009 16:23:58 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
David D. Hillman
Wed, 15 Apr 2009 15:23:18 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
Werner Engelmaier /*
Wed, 15 Apr 2009 16:21:09 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 20:22:08 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 20:15:43 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Werner Engelmaier /*
Wed, 15 Apr 2009 16:13:36 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Werner Engelmaier /*
Wed, 15 Apr 2009 16:07:19 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 19:03:05 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
David D. Hillman
Wed, 15 Apr 2009 13:49:03 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 18:13:39 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Steven Creswick
Wed, 15 Apr 2009 13:54:00 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Inge
Wed, 15 Apr 2009 19:52:13 +0200
Re: Gold/Tin Intermetallics, why are we afraid?
Stadem, Richard D.
Wed, 15 Apr 2009 12:43:43 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
Inge
Wed, 15 Apr 2009 19:42:24 +0200
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 17:37:08 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Werner Engelmaier /*
Wed, 15 Apr 2009 13:19:34 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Whittaker, Dewey (EHCOE)
Wed, 15 Apr 2009 09:55:47 -0700
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 16:41:24 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Joyce Koo
Wed, 15 Apr 2009 12:36:21 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Stadem, Richard D.
Wed, 15 Apr 2009 11:16:03 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
David D. Hillman
Wed, 15 Apr 2009 11:01:43 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
Werner Engelmaier /*
Wed, 15 Apr 2009 11:45:28 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 15:29:08 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Guy Ramsey
Wed, 15 Apr 2009 11:19:59 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Guy Ramsey
Wed, 15 Apr 2009 11:11:09 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Ian Hanna
Wed, 15 Apr 2009 10:26:52 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Whittaker, Dewey (EHCOE)
Wed, 15 Apr 2009 07:02:44 -0700
Re: Gold/Tin Intermetallics, why are we afraid?
Roger Mack
Wed, 15 Apr 2009 08:58:36 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 13:17:24 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Steven Creswick
Wed, 15 Apr 2009 09:07:11 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Wenger, George M.
Wed, 15 Apr 2009 08:58:27 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Stadem, Richard D.
Wed, 15 Apr 2009 07:51:17 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
David D. Hillman
Wed, 15 Apr 2009 07:48:44 -0500
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Wed, 15 Apr 2009 12:44:47 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Guy Ramsey
Wed, 15 Apr 2009 08:37:31 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Hernefjord Ingemar
Wed, 15 Apr 2009 08:42:04 +0200
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Tue, 14 Apr 2009 23:36:01 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Tue, 14 Apr 2009 22:55:36 +0000
Re: Gold/Tin Intermetallics, why are we afraid?
Wenger, George M.
Tue, 14 Apr 2009 17:41:00 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Inge
Tue, 14 Apr 2009 23:27:38 +0200
Re: Gold/Tin Intermetallics, why are we afraid?
Joyce Koo
Tue, 14 Apr 2009 17:18:15 -0400
Re: Gold/Tin Intermetallics, why are we afraid?
Inge
Tue, 14 Apr 2009 23:15:23 +0200
Re: Gold/Tin Intermetallics, why are we afraid?
Vladimir Igoshev
Tue, 14 Apr 2009 21:07:36 +0000
Gold/Tin Intermetallics, why are we afraid?
Inge
Tue, 14 Apr 2009 22:55:52 +0200
New Thread Hand Sanitizer and PCB Assembly
Re: Hand Sanitizer and PCB Assembly
Whittaker, Dewey (EHCOE)
Wed, 29 Apr 2009 07:36:52 -0700
Re: Hand Sanitizer and PCB Assembly
Stadem, Richard D.
Wed, 29 Apr 2009 09:25:21 -0500
Re: Hand Sanitizer and PCB Assembly
Graham Naisbitt
Wed, 29 Apr 2009 15:09:30 +0100
Re: Hand Sanitizer and PCB Assembly
Stadem, Richard D.
Tue, 28 Apr 2009 11:55:48 -0500
Re: Hand Sanitizer and PCB Assembly
Stadem, Richard D.
Tue, 28 Apr 2009 11:54:39 -0500
Re: Hand Sanitizer and PCB Assembly
Werner Engelmaier /*
Tue, 28 Apr 2009 12:09:43 -0400
Re: Hand Sanitizer and PCB Assembly
Werner Engelmaier /*
Tue, 28 Apr 2009 11:58:13 -0400
Re: Hand Sanitizer and PCB Assembly
Joe Russeau
Tue, 28 Apr 2009 11:50:10 -0400
Re: Hand Sanitizer and PCB Assembly
Joe Fjelstad
Tue, 28 Apr 2009 11:48:27 EDT
Re: Hand Sanitizer and PCB Assembly
Brian Ellis
Tue, 28 Apr 2009 18:29:42 +0300
Re: Hand Sanitizer and PCB Assembly
Steve Gregory
Tue, 28 Apr 2009 10:29:07 -0500
Re: Hand Sanitizer and PCB Assembly
Douglas Pauls
Tue, 28 Apr 2009 10:25:56 -0500
Re: Hand Sanitizer and PCB Assembly
John Burke
Tue, 28 Apr 2009 08:17:56 -0700
Re: Hand Sanitizer and PCB Assembly
Ken Bloomquist
Tue, 28 Apr 2009 07:06:57 -0800
Re: Hand Sanitizer and PCB Assembly
Brian Ellis
Tue, 28 Apr 2009 18:05:52 +0300
Re: Hand Sanitizer and PCB Assembly
Whittaker, Dewey (EHCOE)
Tue, 28 Apr 2009 07:53:31 -0700
Re: Hand Sanitizer and PCB Assembly
Whittaker, Dewey (EHCOE)
Tue, 28 Apr 2009 07:25:36 -0700
Re: Hand Sanitizer and PCB Assembly
Dave Dixon
Tue, 28 Apr 2009 09:11:02 -0500
Re: Hand Sanitizer and PCB Assembly
Stadem, Richard D.
Tue, 28 Apr 2009 09:14:55 -0500
Re: Hand Sanitizer and PCB Assembly
Joyce Koo
Tue, 28 Apr 2009 10:01:47 -0400
Re: Hand Sanitizer and PCB Assembly
Karen Tellefsen
Tue, 28 Apr 2009 09:41:56 -0400
Re: Hand Sanitizer and PCB Assembly
Brian Ellis
Tue, 28 Apr 2009 08:19:32 +0300
Re: Hand Sanitizer and PCB Assembly
Bev Christian
Mon, 27 Apr 2009 20:18:27 -0400
Re: Hand Sanitizer and PCB Assembly
John Burke
Mon, 27 Apr 2009 15:02:59 -0700
Re: Hand Sanitizer and PCB Assembly
John Foster
Mon, 27 Apr 2009 14:22:04 -0700
Re: Hand Sanitizer and PCB Assembly
Randall L Bock
Mon, 27 Apr 2009 13:54:22 -0400
Re: Hand Sanitizer and PCB Assembly
Joe Russeau
Mon, 27 Apr 2009 13:49:02 -0400
Re: Hand Sanitizer and PCB Assembly
Lee Whiteman
Mon, 27 Apr 2009 12:46:03 -0400
Re: Hand Sanitizer and PCB Assembly
Whittaker, Dewey (EHCOE)
Mon, 27 Apr 2009 09:15:24 -0700
Re: Hand Sanitizer and PCB Assembly
Graham Collins
Mon, 27 Apr 2009 13:13:02 -0300
Re: Hand Sanitizer and PCB Assembly
Douglas Pauls
Mon, 27 Apr 2009 11:09:50 -0500
Re: Hand Sanitizer and PCB Assembly
Rex Waygood
Mon, 27 Apr 2009 16:58:12 +0100
Re: Hand Sanitizer and PCB Assembly
Whittaker, Dewey (EHCOE)
Mon, 27 Apr 2009 08:52:21 -0700
Re: Hand Sanitizer and PCB Assembly
Ken Bloomquist
Mon, 27 Apr 2009 07:14:44 -0800
Re: Hand Sanitizer and PCB Assembly
Karen Tellefsen
Mon, 27 Apr 2009 10:58:30 -0400
Re: Hand Sanitizer and PCB Assembly
Whittaker, Dewey (EHCOE)
Mon, 27 Apr 2009 07:21:39 -0700
Re: Hand Sanitizer and PCB Assembly
Brian Ellis
Mon, 27 Apr 2009 17:06:42 +0300
Re: Hand Sanitizer and PCB Assembly
Karen Tellefsen
Mon, 27 Apr 2009 09:42:57 -0400
Hand Sanitizer and PCB Assembly
Carl Proescholdt
Mon, 27 Apr 2009 08:22:19 -0500
New Thread Hand Sanitizer and PCB Assembly NTC
Re: Hand Sanitizer and PCB Assembly NTC
Joe Fjelstad
Tue, 28 Apr 2009 12:56:30 EDT
New Thread Help me - NC pin without pad on the pcb
Re: Help me - NC pin without pad on the pcb
Thayer, Wayne
Mon, 20 Apr 2009 08:23:14 -0400
Help me - NC pin without pad on the pcb
Selva Suganthi
Mon, 20 Apr 2009 11:34:08 +0530
New Thread Implementing Class 3 assembly processes
Re: Implementing Class 3 assembly processes
Rios Edward-QDMB76
Thu, 23 Apr 2009 10:34:47 -0400
Re: Implementing Class 3 assembly processes
James Mahoney
Thu, 23 Apr 2009 08:47:11 -0400
Re: Implementing Class 3 assembly processes
Grunde Gjertsen
Thu, 23 Apr 2009 07:46:30 +0200
Re: Implementing Class 3 assembly processes
Tan Geok Ang
Thu, 23 Apr 2009 13:21:51 +0800
Re: Implementing Class 3 assembly processes
Lee Whiteman
Wed, 22 Apr 2009 16:07:25 -0400
Implementing Class 3 assembly processes
Rios Edward-QDMB76
Wed, 22 Apr 2009 15:48:49 -0400
New Thread Info on dry-film tenting of vias, both sides
Re: Info on dry-film tenting of vias, both sides
Kevin Glidden
Mon, 13 Apr 2009 13:18:24 -0400
New Thread Info on LPI tenting of vias, both sides
Re: Info on LPI tenting of vias, both sides
Whittaker, Dewey (EHCOE)
Thu, 16 Apr 2009 14:10:35 -0700
Re: Info on LPI tenting of vias, both sides
Chris Mahanna
Tue, 14 Apr 2009 11:15:04 -0400
Re: Info on LPI tenting of vias, both sides
Kevin Glidden
Mon, 13 Apr 2009 14:32:26 -0400
Re: Info on LPI tenting of vias, both sides
Whittaker, Dewey (EHCOE)
Mon, 13 Apr 2009 10:55:39 -0700
Re: Info on LPI tenting of vias, both sides
Kevin Glidden
Mon, 13 Apr 2009 13:44:43 -0400
Re: Info on LPI tenting of vias, both sides
Chris Mahanna
Mon, 13 Apr 2009 13:25:10 -0400
Re: Info on LPI tenting of vias, both sides
John Foster
Mon, 13 Apr 2009 09:49:55 -0700
Info on LPI tenting of vias, both sides
Kevin Glidden
Mon, 13 Apr 2009 12:44:56 -0400
New Thread Info PCB Design for High Current / Short Duration Pulse
Re: Info PCB Design for High Current / Short Duration Pulse
Paul Reid
Thu, 23 Apr 2009 11:07:14 -0400
Re: Info PCB Design for High Current / Short Duration Pulse
kwood716
Wed, 22 Apr 2009 16:07:52 -0400
Re: Info PCB Design for High Current / Short Duration Pulse
McGlaughlin, Jeffrey A
Tue, 21 Apr 2009 14:17:19 -0400
Info PCB Design for High Current / Short Duration Pulse
Kevin Glidden
Tue, 21 Apr 2009 14:01:48 -0400
New Thread Interesting test regime for handsets
Re: Interesting test regime for handsets
Joe Fjelstad
Sun, 12 Apr 2009 13:51:07 EDT
Re: Interesting test regime for handsets
Bev Christian
Sat, 11 Apr 2009 18:40:58 -0400
Interesting test regime for handsets
Joe Fjelstad
Sat, 11 Apr 2009 16:45:44 EDT
New Thread IPC 6013B
Re: FW: IPC 6013B
James Mahoney
Wed, 8 Apr 2009 15:19:12 -0400
FW: IPC 6013B
Steve Kelly
Wed, 8 Apr 2009 15:10:11 -0400
New Thread IPC APEX/EXPO
IPC APEX/EXPO
Jack Olson
Wed, 1 Apr 2009 08:05:21 -0500
New Thread IPC-A-610 Flux Residues 10.4.1
Re: IPC-A-610 Flux Residues 10.4.1
McGlaughlin, Jeffrey A
Tue, 7 Apr 2009 07:58:08 -0400
IPC-A-610 Flux Residues 10.4.1
Carrillo, Robert
Mon, 6 Apr 2009 16:59:38 -0400
New Thread IPC/EIA-J-STD 002 Steam Ageing
Re: IPC/EIA-J-STD 002 Steam Ageing
Dennis Fritz
Fri, 24 Apr 2009 07:18:57 -0400
Re: IPC/EIA-J-STD 002 Steam Ageing
Graham Naisbitt
Fri, 24 Apr 2009 11:30:32 +0100
Re: IPC/EIA-J-STD 002 Steam Ageing
David D. Hillman
Thu, 23 Apr 2009 23:11:52 -0500
Re: IPC/EIA-J-STD 002 Steam Ageing
Kane, Amol (349)
Thu, 23 Apr 2009 11:45:25 -0400
Re: IPC/EIA-J-STD 002 Steam Ageing
Dennis Fritz
Thu, 23 Apr 2009 11:02:44 -0400
IPC/EIA-J-STD 002 Steam Ageing
Kane, Amol (349)
Thu, 23 Apr 2009 09:37:07 -0400
New Thread Lead Free Reworking of Multilayer Ceramic Capacitors
Re: FW: Lead Free Reworking of Multilayer Ceramic Capacitors
Stadem, Richard D.
Wed, 29 Apr 2009 10:09:04 -0500
Re: FW: Lead Free Reworking of Multilayer Ceramic Capacitors
Thayer, Wayne
Wed, 29 Apr 2009 10:32:17 -0400
Re: FW: Lead Free Reworking of Multilayer Ceramic Capacitors
bob wettermann
Wed, 29 Apr 2009 06:35:33 -0700
Re: FW: Lead Free Reworking of Multilayer Ceramic Capacitors
Stadem, Richard D.
Wed, 29 Apr 2009 08:22:45 -0500
FW: Lead Free Reworking of Multilayer Ceramic Capacitors
James Liddle
Wed, 29 Apr 2009 08:01:00 +0000
New Thread LGA acceptance
Re: LGA acceptance
Werner Engelmaier /*
Mon, 27 Apr 2009 14:01:02 -0400
Re: LGA acceptance
Inge
Mon, 27 Apr 2009 19:50:31 +0200
New Thread LGAs in a military environment?
Re: LGAs in a military environment?
Lee Whiteman
Fri, 24 Apr 2009 16:32:36 -0400
Re: LGAs in a military environment?
Inge
Fri, 24 Apr 2009 18:50:16 +0200
Re: LGAs in a military environment?
John Maxwell
Thu, 16 Apr 2009 13:48:00 -0700
Re: LGAs in a military environment?
Joyce Koo
Thu, 16 Apr 2009 15:31:14 -0400
Re: LGAs in a military environment?
Stadem, Richard D.
Thu, 16 Apr 2009 14:08:26 -0500
Re: LGAs in a military environment?
Stadem, Richard D.
Thu, 16 Apr 2009 14:06:51 -0500
Re: LGAs in a military environment?
Paul Edwards
Thu, 16 Apr 2009 11:52:17 -0700
Re: LGAs in a military environment?
Graham Collins
Thu, 16 Apr 2009 15:44:46 -0300
Re: LGAs in a military environment?
John Maxwell
Thu, 16 Apr 2009 11:31:28 -0700
Re: LGAs in a military environment?
Ioan Tempea
Thu, 16 Apr 2009 14:32:34 -0400
Re: LGAs in a military environment?
Bev Christian
Thu, 16 Apr 2009 13:51:40 -0400
Re: LGAs in a military environment?
Thayer, Wayne
Thu, 16 Apr 2009 13:44:15 -0400
Re: LGAs in a military environment?
Werner Engelmaier /*
Thu, 16 Apr 2009 13:23:04 -0400
Re: LGAs in a military environment?
Paul Edwards
Thu, 16 Apr 2009 10:11:51 -0700
Re: LGAs in a military environment?
Ian Hanna
Thu, 16 Apr 2009 11:57:08 -0400
Re: LGAs in a military environment?
Eric CHRISTISON
Thu, 16 Apr 2009 16:47:33 +0100
Re: LGAs in a military environment?
Lee Whiteman
Thu, 16 Apr 2009 11:42:35 -0400
Re: LGAs in a military environment?
Werner Engelmaier /*
Thu, 16 Apr 2009 11:33:18 -0400
Re: LGAs in a military environment?
Joyce Koo
Thu, 16 Apr 2009 11:32:00 -0400
Re: LGAs in a military environment?
Bev Christian
Thu, 16 Apr 2009 11:29:43 -0400
Re: LGAs in a military environment?
Ioan Tempea
Thu, 16 Apr 2009 11:25:04 -0400
Re: LGAs in a military environment?
Stadem, Richard D.
Thu, 16 Apr 2009 10:11:02 -0500
Re: LGAs in a military environment?
Werner Engelmaier /*
Thu, 16 Apr 2009 11:10:08 -0400
Re: LGAs in a military environment?
Lee Whiteman
Thu, 16 Apr 2009 11:05:31 -0400
Re: LGAs in a military environment?
Bev Christian
Thu, 16 Apr 2009 10:57:44 -0400
Re: LGAs in a military environment?
Thayer, Wayne
Thu, 16 Apr 2009 10:47:07 -0400
Re: LGAs in a military environment?
Temkin, Gregg
Thu, 16 Apr 2009 07:29:15 -0700
Re: LGAs in a military environment?
Stadem, Richard D.
Thu, 16 Apr 2009 09:02:46 -0500
Re: LGAs in a military environment?
kwood716
Thu, 16 Apr 2009 09:39:52 -0400
Re: LGAs in a military environment?
Post, Scott E
Thu, 16 Apr 2009 09:27:34 -0400
Re: LGAs in a military environment?
Temkin, Gregg
Thu, 16 Apr 2009 06:21:56 -0700
Re: LGAs in a military environment?
Steve Gregory
Thu, 16 Apr 2009 07:15:54 -0500
Re: LGAs in a military environment?
kwood716
Thu, 16 Apr 2009 08:05:14 -0400
LGAs in a military environment?
Graham Collins
Thu, 16 Apr 2009 07:32:15 -0300
New Thread Mystery Connector
Re: Mystery Connector
Douglas Pauls
Thu, 23 Apr 2009 09:02:42 -0500
Re: Mystery Connector
Douglas Pauls
Thu, 23 Apr 2009 08:26:44 -0500
Re: Mystery Connector
Neil Maloney
Mon, 20 Apr 2009 16:54:28 -0500
Re: Mystery Connector
Douglas Erb
Mon, 20 Apr 2009 14:19:49 -0700
Re: Mystery Connector
Lee Whiteman
Mon, 20 Apr 2009 17:11:27 -0400
Re: Mystery Connector
Douglas Erb
Mon, 20 Apr 2009 14:10:58 -0700
Mystery Connector
Douglas Pauls
Mon, 20 Apr 2009 15:17:31 -0500
New Thread New technique------USB 3.0
New technique------USB 3.0
Liu, Edwin
Wed, 15 Apr 2009 16:29:50 +0800
New Thread Nikon microscope camera DXM-1200
Re: Nikon microscope camera DXM-1200
Hernefjord Ingemar
Thu, 2 Apr 2009 08:50:17 +0200
Re: Nikon microscope camera DXM-1200
Lee Hill
Wed, 1 Apr 2009 11:29:20 -0400
New Thread Nitrogen use for selective soldering equipment
Re: Nitrogen use for selective soldering equipment
Mike Sewell
Thu, 30 Apr 2009 07:41:16 -0500
Re: Nitrogen use for selective soldering equipment
Hernefjord Ingemar
Thu, 30 Apr 2009 09:02:14 +0200
Nitrogen use for selective soldering equipment
Craig Sullivan
Wed, 29 Apr 2009 13:26:56 -0500
New Thread NPTH or PTH?
Re: NPTH or PTH?
Bush, Jeffrey D. (US SSA)
Thu, 16 Apr 2009 10:56:06 -0400
Re: NPTH or PTH?
Phil Nutting
Thu, 16 Apr 2009 09:10:42 -0400
NPTH or PTH?
李义
Thu, 16 Apr 2009 17:07:30 +0800
New Thread NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Brian Ellis
Mon, 27 Apr 2009 17:37:56 +0300
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Whittaker, Dewey (EHCOE)
Mon, 27 Apr 2009 07:16:02 -0700
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Douglas Pauls
Mon, 27 Apr 2009 07:07:26 -0500
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Werner Engelmaier /*
Sat, 25 Apr 2009 14:35:41 -0400
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Inge
Fri, 24 Apr 2009 21:51:57 +0200
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Wenger, George M.
Thu, 16 Apr 2009 19:07:28 -0400
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Douglas Pauls
Thu, 16 Apr 2009 16:31:13 -0500
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Lee Whiteman
Thu, 16 Apr 2009 17:20:34 -0400
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Whittaker, Dewey (EHCOE)
Thu, 16 Apr 2009 13:50:44 -0700
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
David D. Hillman
Thu, 16 Apr 2009 15:25:37 -0500
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Douglas Pauls
Thu, 16 Apr 2009 15:20:57 -0500
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
Phil Nutting
Thu, 16 Apr 2009 16:20:52 -0400
Re: NTC - [TN] Gold/Tin Intermetallics, why are we afraid?
David D. Hillman
Thu, 16 Apr 2009 14:53:04 -0500
New Thread NTC GM & Chrysler Out of NASCAR
Re: NTC GM & Chrysler Out of NASCAR
Louis Hart
Fri, 3 Apr 2009 12:28:58 -0400
New Thread NTC RE: GM & Chrysler Out of NASCAR
Re: NTC RE: GM & Chrysler Out of NASCAR
Neil Maloney
Wed, 1 Apr 2009 14:23:05 -0500
NTC RE: GM & Chrysler Out of NASCAR
Steve Gregory
Wed, 1 Apr 2009 07:07:30 -0500
New Thread NTC RE: [TN] Hand Sanitizer and PCB Assembly
NTC RE: [TN] Hand Sanitizer and PCB Assembly
Bev Christian
Tue, 28 Apr 2009 09:54:04 -0400
New Thread NTC: Some good news for someone finally!
Re: NTC: Some good news for someone finally!
Dwight Mattix
Fri, 3 Apr 2009 08:26:07 -0700
Re: NTC: Some good news for someone finally!
Chuck Brummer
Fri, 3 Apr 2009 07:54:26 -0700
Re: NTC: Some good news for someone finally!
Joyce Koo
Fri, 3 Apr 2009 10:38:23 -0400
NTC: Some good news for someone finally!
Steve Gregory
Fri, 3 Apr 2009 08:57:38 -0500
New Thread NTC? SI vs imperial, cont.
Re: NTC? SI vs imperial, cont.
Joe Fjelstad
Wed, 15 Apr 2009 12:21:31 EDT
Re: NTC? SI vs imperial, cont.
Steven Creswick
Wed, 15 Apr 2009 12:05:11 -0400
Re: NTC? SI vs imperial, cont.
Joe Fjelstad
Wed, 15 Apr 2009 12:00:53 EDT
Re: NTC? SI vs imperial, cont.
Graham Naisbitt
Wed, 15 Apr 2009 13:29:54 +0100
NTC? SI vs imperial, cont.
Louis Hart
Tue, 14 Apr 2009 12:06:36 -0400
New Thread OSP damage
Re: OSP damage
Vladimir Igoshev
Wed, 29 Apr 2009 17:57:32 -0400
OSP damage
Joyce Koo
Wed, 29 Apr 2009 17:33:11 -0400
New Thread PCB Failure analysis
Re: PCB Failure analysis
Paul Reid
Tue, 7 Apr 2009 12:33:15 -0400
Re: PCB Failure analysis
mp3
Tue, 7 Apr 2009 19:59:02 +0530
Re: PCB Failure analysis
Dwight Mattix
Tue, 7 Apr 2009 07:23:03 -0700
Re: PCB Failure analysis
Karnwal, Pankaj
Tue, 7 Apr 2009 13:18:23 +0530
Re: PCB Failure analysis
Werner Engelmaier /*
Mon, 6 Apr 2009 13:45:06 -0400
Re: PCB Failure analysis
Joyce Koo
Mon, 6 Apr 2009 10:57:21 -0400
Re: PCB Failure analysis
Dwight Mattix
Mon, 6 Apr 2009 06:43:53 -0700
Re: PCB Failure analysis
Dwight Mattix
Mon, 6 Apr 2009 06:41:41 -0700
PCB Failure analysis
mp3
Mon, 6 Apr 2009 10:35:57 +0530
New Thread Plating on screws
Re: Plating on screws
Dennis Fritz
Wed, 29 Apr 2009 20:51:20 -0400
Re: Plating on screws
Vladimir Igoshev
Wed, 29 Apr 2009 18:34:43 -0400
Re: Plating on screws
Gary Bremer
Wed, 29 Apr 2009 15:27:14 -0700
Re: Plating on screws
Whittaker, Dewey (EHCOE)
Wed, 29 Apr 2009 13:45:06 -0700
Re: Plating on screws
Dennis Fritz
Wed, 29 Apr 2009 16:34:09 -0400
Re: Plating on screws
EIMCNews
Sun, 26 Apr 2009 13:28:28 -0700
Re: Plating on screws
David D. Hillman
Fri, 24 Apr 2009 15:30:07 -0500
Re: Plating on screws
Steve Smith
Fri, 24 Apr 2009 16:20:30 -0400
Re: Plating on screws
David D. Hillman
Fri, 24 Apr 2009 14:17:22 -0500
Re: Plating on screws
Joyce Koo
Fri, 24 Apr 2009 12:29:19 -0400
Re: Plating on screws
Stadem, Richard D.
Fri, 24 Apr 2009 11:05:19 -0500
Re: Plating on screws
Stadem, Richard D.
Fri, 24 Apr 2009 10:54:28 -0500
Re: Plating on screws
EIMCNews
Fri, 24 Apr 2009 08:44:40 -0700
Re: Plating on screws
Gary Camac
Thu, 23 Apr 2009 16:20:16 -0500
Re: Plating on screws
R Sedlak
Thu, 23 Apr 2009 09:38:23 -0700
Re: Plating on screws
Phil Nutting
Thu, 23 Apr 2009 11:20:46 -0400
Re: Plating on screws
David D. Hillman
Thu, 23 Apr 2009 10:05:47 -0500
Plating on screws
Gary Camac
Thu, 23 Apr 2009 08:09:11 -0500
New Thread Plating over metal
Re: Plating over metal
Dennis Fritz
Wed, 8 Apr 2009 10:29:48 -0400
Re: Plating over metal
Joyce Koo
Wed, 8 Apr 2009 10:28:37 -0400
Re: Plating over metal
David Bergman
Wed, 8 Apr 2009 09:28:31 -0500
Re: Plating over metal
Mike Sewell
Wed, 8 Apr 2009 09:28:26 -0500
Plating over metal
Linda Langley
Wed, 8 Apr 2009 10:22:59 -0400
New Thread Pre-printed shrink tubing
Re: Pre-printed shrink tubing
Mike Sewell
Mon, 27 Apr 2009 07:40:20 -0500
Pre-printed shrink tubing
Eric Kalgren
Fri, 24 Apr 2009 22:02:58 -0400
New Thread PTF Technology
Re: PTF Technology
Joe Fjelstad
Thu, 16 Apr 2009 10:49:33 EDT
PTF Technology
Harris Dy
Wed, 15 Apr 2009 20:22:01 -0700
New Thread Roll-to-Roll Research
Re: Roll-to-Roll Research
Bev Christian
Tue, 7 Apr 2009 19:41:36 -0400
Re: Roll-to-Roll Research
Syed Ahmad
Tue, 7 Apr 2009 11:24:03 -0500
Re: Roll-to-Roll Research
Syed Ahmad
Tue, 7 Apr 2009 11:18:08 -0500
Re: Roll-to-Roll Research
Joe Fjelstad
Tue, 7 Apr 2009 11:52:46 EDT
Re: Roll-to-Roll Research
Lee parker
Tue, 7 Apr 2009 11:13:32 -0400
Re: Roll-to-Roll Research
Robert Kondner
Tue, 7 Apr 2009 10:56:58 -0400
Re: Roll-to-Roll Research
Joe Fjelstad
Tue, 7 Apr 2009 10:37:02 EDT
Re: Roll-to-Roll Research
Stadem, Richard D.
Tue, 7 Apr 2009 08:22:32 -0500
Re: Roll-to-Roll Research
Syed Ahmad
Tue, 7 Apr 2009 04:08:09 -0500
Re: Roll-to-Roll Research
Bev Christian
Mon, 6 Apr 2009 22:05:24 -0400
Roll-to-Roll Research
Syed Ahmad
Mon, 6 Apr 2009 11:16:51 -0500
New Thread Second time reflow of PoP on bottom side of PCBA
Re: Second time reflow of PoP on bottom side of PCBA
Dean Stadem
Thu, 23 Apr 2009 21:29:03 -0500
Re: Second time reflow of PoP on bottom side of PCBA
Tan Geok Ang
Fri, 24 Apr 2009 08:47:26 +0800
Re: Second time reflow of PoP on bottom side of PCBA
Bev Christian
Thu, 23 Apr 2009 20:06:40 -0400
Second time reflow of PoP on bottom side of PCBA
Peter L
Thu, 23 Apr 2009 19:00:12 -0500
New Thread Solder Ball Problem
Re: Solder Ball Problem
P. Langeveld
Sat, 25 Apr 2009 21:26:49 +0200
Re: Solder Ball Problem
Mike Fenner
Fri, 24 Apr 2009 13:26:25 +0100
Re: Solder Ball Problem
John Parsons
Thu, 23 Apr 2009 13:10:44 -0700
Re: Solder Ball Problem
Bob Perkins
Thu, 23 Apr 2009 12:47:25 -0700
Re: Solder Ball Problem
Graham Collins
Thu, 23 Apr 2009 16:22:08 -0300
Re: Solder Ball Problem
John Parsons
Thu, 23 Apr 2009 11:58:13 -0700
Re: Solder Ball Problem
Steve Gregory
Thu, 23 Apr 2009 13:42:54 -0500
Re: Solder Ball Problem
Stadem, Richard D.
Thu, 23 Apr 2009 13:35:02 -0500
Solder Ball Problem
John Parsons
Thu, 23 Apr 2009 11:15:43 -0700
New Thread solder fatigue analysis for slowly changing thermal envi ronment
Re: solder fatigue analysis for slowly changing thermal envi ronment
Ken Bloomquist
Mon, 27 Apr 2009 10:56:41 -0800
New Thread solder fatigue analysis for slowly changing thermal environment
Re: solder fatigue analysis for slowly changing thermal environment
Werner Engelmaier /*
Mon, 27 Apr 2009 14:06:23 -0400
Re: solder fatigue analysis for slowly changing thermal environment
Whittaker, Dewey (EHCOE)
Mon, 27 Apr 2009 10:50:47 -0700
Re: solder fatigue analysis for slowly changing thermal environment
Werner Engelmaier /*
Mon, 27 Apr 2009 13:16:28 -0400
Re: solder fatigue analysis for slowly changing thermal environment
Kevin Glidden
Mon, 27 Apr 2009 08:10:25 -0500
Re: solder fatigue analysis for slowly changing thermal environment
Werner Engelmaier /*
Fri, 24 Apr 2009 17:32:43 -0400
Re: solder fatigue analysis for slowly changing thermal environment
Kevin Glidden
Fri, 24 Apr 2009 15:12:59 -0400
Re: solder fatigue analysis for slowly changing thermal environment
Werner Engelmaier /*
Fri, 24 Apr 2009 09:50:07 -0400
Re: solder fatigue analysis for slowly changing thermal environment
Nieznanski, John A - SSD
Thu, 23 Apr 2009 18:51:45 -0400
Re: solder fatigue analysis for slowly changing thermal environment
Werner Engelmaier /*
Thu, 23 Apr 2009 14:44:16 -0400
solder fatigue analysis for slowly changing thermal environment
Nieznanski, John A - SSD
Wed, 22 Apr 2009 14:11:14 -0400
New Thread Solder Paste In the Solder Pot
Re: Solder Paste In the Solder Pot
John Goulet
Sun, 19 Apr 2009 16:36:48 +0000
Re: Solder Paste In the Solder Pot
Mike Fenner
Mon, 6 Apr 2009 09:36:33 +0100
Re: Solder Paste In the Solder Pot
李义
Fri, 3 Apr 2009 10:23:57 +0800
Re: Solder Paste In the Solder Pot
Ken Bloomquist
Thu, 2 Apr 2009 12:26:15 -0800
Re: Solder Paste In the Solder Pot
Stadem, Richard D.
Thu, 2 Apr 2009 14:15:27 -0500
Re: Solder Paste In the Solder Pot
Stadem, Richard D.
Thu, 2 Apr 2009 14:12:26 -0500
Re: Solder Paste In the Solder Pot
Stadem, Richard D.
Thu, 2 Apr 2009 14:03:05 -0500
Re: Solder Paste In the Solder Pot
Steve Gregory
Thu, 2 Apr 2009 14:00:57 -0500
Re: Solder Paste In the Solder Pot
Graham Collins
Thu, 2 Apr 2009 15:59:57 -0300
Re: Solder Paste In the Solder Pot
Jerry Dengler
Thu, 2 Apr 2009 14:48:04 -0400
Solder Paste In the Solder Pot
Ken Bloomquist
Thu, 2 Apr 2009 10:42:35 -0800
New Thread Solderability fluxes
Re: Solderability fluxes
David D. Hillman
Thu, 9 Apr 2009 07:18:36 -0500
New Thread Solvent for cured cyanoacrylate adhesive
Re: Solvent for cured cyanoacrylate adhesive
Stadem, Richard D.
Thu, 2 Apr 2009 13:27:55 -0500
Re: Solvent for cured cyanoacrylate adhesive
R Sedlak
Thu, 2 Apr 2009 11:07:25 -0700
Re: Solvent for cured cyanoacrylate adhesive
Eric CHRISTISON
Thu, 2 Apr 2009 15:41:31 +0100
Re: Solvent for cured cyanoacrylate adhesive
Brian Ellis
Thu, 2 Apr 2009 17:20:59 +0300
Re: Solvent for cured cyanoacrylate adhesive
Temkin, Gregg
Thu, 2 Apr 2009 07:20:16 -0700
Re: Solvent for cured cyanoacrylate adhesive
Stadem, Richard D.
Thu, 2 Apr 2009 08:56:43 -0500
Re: Solvent for cured cyanoacrylate adhesive
Peter Swanson
Thu, 2 Apr 2009 14:38:59 +0100
Re: Solvent for cured cyanoacrylate adhesive
Simonik, Dave R. (David)
Thu, 2 Apr 2009 09:38:37 -0400
Re: Solvent for cured cyanoacrylate adhesive
R Sedlak
Thu, 2 Apr 2009 06:37:14 -0700
Re: Solvent for cured cyanoacrylate adhesive
Stadem, Richard D.
Thu, 2 Apr 2009 08:29:09 -0500
Solvent for cured cyanoacrylate adhesive
Steve Gregory
Thu, 2 Apr 2009 08:08:54 -0500
New Thread STATIC DISSIPATIVE COATINGS
Re: STATIC DISSIPATIVE COATINGS
Lee parker
Wed, 29 Apr 2009 20:07:38 -0400
Re: STATIC DISSIPATIVE COATINGS
Douglas Pauls
Wed, 29 Apr 2009 14:31:08 -0500
Re: STATIC DISSIPATIVE COATINGS
Mike Fenner
Wed, 29 Apr 2009 18:51:21 +0100
Re: STATIC DISSIPATIVE COATINGS
Peter Swanson
Wed, 29 Apr 2009 18:28:15 +0100
Re: STATIC DISSIPATIVE COATINGS
Ted Tontis
Wed, 29 Apr 2009 12:24:33 -0500
Re: STATIC DISSIPATIVE COATINGS
Whittaker, Dewey (EHCOE)
Wed, 29 Apr 2009 10:15:06 -0700
STATIC DISSIPATIVE COATINGS
Lee Whiteman
Wed, 29 Apr 2009 13:08:15 -0400
New Thread Stencil Life
Re: Stencil Life
Steve Gregory
Mon, 13 Apr 2009 13:00:50 -0500
Re: Stencil Life
Stadem, Richard D.
Mon, 13 Apr 2009 12:50:08 -0500
Stencil Life
Kane, Amol (349)
Mon, 13 Apr 2009 13:08:46 -0400
New Thread Straddle mount connector at SMT
Re: Straddle mount connector at SMT
Bev Christian
Mon, 20 Apr 2009 18:57:02 -0400
Re: Straddle mount connector at SMT
Peter L
Mon, 20 Apr 2009 12:30:11 -0500
Re: Straddle mount connector at SMT
stephengregory5849
Tue, 14 Apr 2009 20:51:37 -0500
Re: Straddle mount connector at SMT
Robert Kondner
Tue, 14 Apr 2009 19:16:05 -0400
Straddle mount connector at SMT
Peter L
Tue, 14 Apr 2009 17:54:52 -0500
New Thread Test
Test
Blair Hogg
Wed, 1 Apr 2009 12:13:03 -0500
New Thread TH lead forming machines
Re: TH lead forming machines
John Goulet
Sun, 19 Apr 2009 16:28:53 +0000
Re: TH lead forming machines
Gary Camac
Mon, 6 Apr 2009 07:51:19 -0500
Re: TH lead forming machines
Gary Camac
Mon, 6 Apr 2009 07:39:27 -0500
Re: TH lead forming machines
Phil Nutting
Mon, 6 Apr 2009 08:30:40 -0400
Re: TH lead forming machines
Steve Gregory
Mon, 6 Apr 2009 07:17:09 -0500
TH lead forming machines
Ioan Tempea
Sun, 5 Apr 2009 21:48:09 -0400
New Thread The effects of vibration on SMT part overhang
Re: The effects of vibration on SMT part overhang
John Goulet
Mon, 20 Apr 2009 20:49:56 +0000
Re: The effects of vibration on SMT part overhang
Werner Engelmaier /*
Mon, 20 Apr 2009 14:26:49 -0400
The effects of vibration on SMT part overhang
Cindy S. Bohler
Mon, 20 Apr 2009 13:10:34 -0500
New Thread threaded fastener selection guide
Re: threaded fastener selection guide
Frederick Miller
Thu, 9 Apr 2009 15:07:11 -0400
Re: threaded fastener selection guide
Frederick Miller
Thu, 9 Apr 2009 15:02:56 -0400
Re: threaded fastener selection guide
Ken Bloomquist
Thu, 9 Apr 2009 10:58:25 -0800
Re: threaded fastener selection guide
Frederick Miller
Thu, 9 Apr 2009 14:44:46 -0400
Re: threaded fastener selection guide
Croslin, Robert
Thu, 9 Apr 2009 14:09:17 -0400
Re: threaded fastener selection guide
Steven Creswick
Wed, 8 Apr 2009 10:59:04 -0400
threaded fastener selection guide
Joe Macko
Wed, 8 Apr 2009 07:43:51 -0700
New Thread Traces and vias under components
Re: Traces and vias under components
John Goulet
Sun, 19 Apr 2009 19:22:41 +0000
New Thread Video: Surprise fun in Antwerp train station
Re: FW: Video: Surprise fun in Antwerp train station
Lee Whiteman
Thu, 9 Apr 2009 11:00:30 -0400
Re: FW: Video: Surprise fun in Antwerp train station
Chuck Brummer
Thu, 9 Apr 2009 07:51:15 -0700
FW: Video: Surprise fun in Antwerp train station
Randall L Bock
Wed, 8 Apr 2009 10:23:43 -0400
New Thread when do vias require a thermal relief
Re: when do vias require a thermal relief
Pete Houwen
Tue, 7 Apr 2009 10:05:29 -0500
Re: when do vias require a thermal relief
Stadem, Richard D.
Tue, 7 Apr 2009 09:25:16 -0500
Re: when do vias require a thermal relief
Bush, Jeffrey D. (US SSA)
Tue, 7 Apr 2009 09:56:13 -0400
Re: when do vias require a thermal relief
Pete Houwen
Tue, 7 Apr 2009 08:42:05 -0500
Re: when do vias require a thermal relief
Upton, Shawn
Mon, 6 Apr 2009 15:24:48 -0400
Re: when do vias require a thermal relief
Werner Engelmaier /*
Mon, 6 Apr 2009 15:13:43 -0400
when do vias require a thermal relief
Dee Stover
Mon, 6 Apr 2009 11:58:40 -0700
New Thread Wire Crimps: Machine Vs Hand Tool Specs
Re: Wire Crimps: Machine Vs Hand Tool Specs
Liu, Edwin
Tue, 14 Apr 2009 11:37:36 +0800
Re: Wire Crimps: Machine Vs Hand Tool Specs
Frederick Miller
Mon, 6 Apr 2009 15:39:48 -0400
Re: Wire Crimps: Machine Vs Hand Tool Specs
Paul Edwards
Mon, 6 Apr 2009 11:36:38 -0700
Re: Wire Crimps: Machine Vs Hand Tool Specs
Frederick Miller
Mon, 6 Apr 2009 12:16:52 -0400
Wire Crimps: Machine Vs Hand Tool Specs
Forrester, Michael (H USA)
Mon, 6 Apr 2009 12:05:23 -0400
New Thread Zinc Plating and whiskers
Re: Zinc Plating and whiskers
Steve Gregory
Fri, 24 Apr 2009 12:09:28 -0500
Re: Zinc Plating and whiskers
Dennis Fritz
Fri, 24 Apr 2009 12:53:54 -0400
New Thread [DC] when do vias require a thermal relief
Re: [DC] when do vias require a thermal relief
Larry Dzaugis
Mon, 6 Apr 2009 17:27:01 -0500
Re: [DC] when do vias require a thermal relief
Dee Stover
Mon, 6 Apr 2009 14:16:52 -0700
New Thread [TN] Gold/Tin Intermetallics, why are we afraid?
FW: [TN] Gold/Tin Intermetallics, why are we afraid?
Stadem, Richard D.
Wed, 15 Apr 2009 10:44:43 -0500
New Thread [TN] Help me - NC pin without pad on the pcb
Fw: [TN] Help me - NC pin without pad on the pcb
Selva Suganthi
Mon, 20 Apr 2009 11:40:37 +0530

ATOM RSS1 RSS2