Plus, I haven't a clue what Tocopheryl Acetate is, but it sounds as if
it might have an ionic bond somewhere in the molecule (it could also be
an ester).
Brian
Karen Tellefsen wrote:
> Purell:
>
> Ingredients:
> Active Ingredients: Contains: Ethyl Alcohol (62%)
>
> Inactive Ingredients: Water, Glycerin, Isopropyl Myristate, Propylene
> Glycol, Tocopheryl Acetate, Aminomethyl Propanol, Carbomer, Fragrance
> (parfum)
>
>
> The glycerin and propylene glycol would concern me, they're both
> hydrophillic. The ethanol in the active ingredient, maybe a mixture of
> 60% ethanol 35% water 5% isopropanol ( to make it undrinkable, but safe
> enough for topical use) would be better around circuit boards. It would
> tend to dry the users' hands, but would not help to contaminate circuit
> boards.
>
> I've always found hand sanitizer superfluous, just washing ones hands with
> soap and water kills most germs.
>
>
> Karen Tellefsen - Electrical Testing
> [log in to unmask]
> 908-791-3069
>
>
>
>
> Carl Proescholdt
> <[log in to unmask]>
> Sent by: TechNet To
> <[log in to unmask]> [log in to unmask]
> cc
>
> 04/27/2009 09:24 Subject
> AM [TN] Hand Sanitizer and PCB
> Assembly
>
> Please respond to
> TechNet E-Mail
> Forum
> <[log in to unmask]>
> ; Please respond
> to
> Carl Proescholdt
> <[log in to unmask]>
>
>
>
>
>
>
> With the recent news cycle and the concern over the flu virus, several
> people in the workforce have been asking if using a hand sanitizer such as
> Purell brand would be acceptable to use. From what I can see in the MSDS,
> the main component is alcohol, but not all ingredients are listed.
>
> I realize the best approach for actual board contact is a good hand washing
> and gloves, but even if we put this stuff in the breakroom, and ask that
> people wash and re-glove before returning to the production area, I am
> afraid of contaminants reaching the production floor. Also, if we don’t
> provide something, I suspect people will start carrying it in and using it
> themselves. Has anyone else turned up anything to suggest that it wouldn't
> be OK to use this type product in an assembly environment? Any specific
> brand recommendations?
>
> If only we could just build boards...Happy Monday!
>
> Carl Proescholdt
> dca manufacturing corp
>
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|