LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


July 2006


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

'FAB Notes' for Lead-Free and SnPb PCBs (2 messages)
(2) [TN] BGAs; SnPb vice SAC Balls (1 message)
(3) [TN] BGAs; SnPb vice SAC Balls (2 messages)
0.6mm Tg 130 PCB in RoHS process (5 messages)
6016 and 6012 (2 messages)
AIR VAC DRS24 users (3 messages)
Alan Kreplick is out of the office. (1 message)
Amphenol Plant in N.Y. Flooded... (4 messages)
Antw: Re: [TN] Surface Roughness (Out of office) (1 message)
Austin American Technology Corp 9600 (2 messages)
Auto Response from [log in to unmask] (2 messages)
AW: [TN] osp over gold bond pads (1 message)
Back in the USA (1 message)
Barbara Burcham email address and business phone change (1 message)
BBT passed , after assembly getting shorted ! (3 messages)
BGA Pad Missing on Board (2 messages)
BGAs; SnPb vice SAC Balls (13 messages)
Blind Via Internal Annular Ring (6 messages)
Blowholes pandemic (9 messages)
BTU VIP 70 Exhaust Requirement (1 message)
Buried wire (3 messages)
Corey A Peterson/Mequon/RA/Rockwell is out of the office. (1 message)
Corrosion on Gold plating (14 messages)
DecaBDE (1 message)
Desiccant for Silver bds (3 messages)
discontinue- (1 message)
Edge plating on copper core PCBs (3 messages)
FA lab around the Bay Area (2 messages)
Ferrous Plating of PCB (6 messages)
Flex Circuit Voltage Failures (6 messages)
FW: Colorado Designer's Council Vendor Faire Invitation (1 message)
Geometric Tolerance (5 messages)
Haven't we been here before? (8 messages)
HC-49 Crystals (2 messages)
Humidity? (12 messages)
Immersion Silver for ICT (5 messages)
IPC "Flex & Chips" Conference - July 24-25, 2006 (1 message)
IPC Advanced Troubleshooting the PCB Manufacturing Process - 8/2/06 (1 message)
IPC Lead Free Audit Program (1 message)
IPC webcast - Electroplating Technologies - 7/27/06 (6 messages)
IPC-A-610D (10 messages)
Last Chance to Register (1 message)
Last Chance to Register for the IPC Flex & Chips International Conference (2 messages)
Last Chance to Register for the IPC International Flex and Chips Conference (1 message)
Last Chance to Register for the IPC RoHS Compliance Workshops (1 message)
Last chance to register for the RoHS "Back to Basics" Workshops (1 message)
MIL-P-55110 (4 messages)
NTC Palm Treo available in Europe? Nope! (2 messages)
osp over gold bond pads (8 messages)
Out of Office (1 message)
Out Of The Office (1 message)
PCB Warpness (3 messages)
PCB Warpness Allowed on Second Pass? (1 message)
Porosity Testing (4 messages)
recoating tin finish on qfn packages (1 message)
Recommended smt SnPb solder reflow profile temperature ramp rates (3 messages)
Register now for IPC's webcast series on Printed Circuit Boards (1 message)
Register now for IPC/JEDEC Int. Conf. on LF Components & Assemblies in Montreal, Canada on 8/16-17/06 (1 message)
Register now PCB Fabrication"Back to Basics" webcast series starting 7/13/06 (1 message)
Register Today for the Legislation-Compliant Electronic Assembly Workshop (1 message)
Register Today for These Upcoming Lead Free Events (1 message)
Registration Reminder for IPC's Back to Basics Webcast Series & PCB Manufacturing Process Workshop (1 message)
Registration Reminder for the IPC Lead Free Solderable Finishes Webcast Series (1 message)
Registration Reminder for the IPC Legislation-Compliant Electronic Assembly Workshop (1 message)
Registration Reminder for the IPC PCB Manufacturing Process (1 message)
Registration Reminder for the IPC/JEDEC International Lead Free Conference in Montreal (1 message)
Rocha Laminate Voids.. (4 messages)
ROHS (1 message)
RoHS 5 and RoHS 6 (2 messages)
RoHS Day (3 messages)
Roller Tinning Process (15 messages)
SAC 305 Pb Free Wave Solder Profile Help (1 message)
SAC-BGAs on ENIG Using SnPb solder paste (7 messages)
SAC105 BGA ball (1 message)
Setup/tear down loss (4 messages)
silver anti-tarnish (8 messages)
Simple Green Industrial Products (2 messages)
So long guys (28 messages)
So long guys NTC (1 message)
Solder balls (4 messages)
Solder Paste Dispensing Question (2 messages)
Stalking High-Tech Sweatshops (1 message)
Stress Strain of ENiG (3 messages)
Surface Roughness (7 messages)
temporary attachment of a BGA to a PCB for test (10 messages)
thick stencils (1 message)
Validy of Teardropped vias? (7 messages)
Vias under parts (3 messages)
Vibration testing (3 messages)
Water Cleaning No Clean FLux from a PCBA (3 messages)
What causing dewetting on HASL pcb (5 messages)
Whats a good way to verify material is Ti vs Stainless? (10 messages)
[IPC-600-6012] Inspection area of coupons (1 message)
[LF] Price premium for Tg = 170 Deg C? (1 message)
[LF] [TN] RoHS 5 and RoHS 6 (1 message)
[NTC] Haven't we been here before? (1 message)
[NTC] SAC-BGAs on ENIG Using SnPb solder paste (1 message)
[NTC] [TN] Haven't we been here before? (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

'FAB Notes' for Lead-Free and SnPb PCBs

'FAB Notes' for Lead-Free and SnPb PCBs

Werner Engelmaier <[log in to unmask]>

Tue, 25 Jul 2006 09:48:08 EDT

77 lines

Re: 'FAB Notes' for Lead-Free and SnPb PCBs

Werner Engelmaier <[log in to unmask]>

Tue, 25 Jul 2006 10:04:39 EDT

26 lines

New Thread

(2) [TN] BGAs; SnPb vice SAC Balls

Re: (2) [TN] BGAs; SnPb vice SAC Balls

Barmuta, Mike <[log in to unmask]>

Fri, 28 Jul 2006 09:04:55 -0700

424 lines

New Thread

(3) [TN] BGAs; SnPb vice SAC Balls

Re: (3) [TN] BGAs; SnPb vice SAC Balls

Barmuta, Mike <[log in to unmask]>

Fri, 28 Jul 2006 09:36:20 -0700

466 lines

Re: (3) [TN] BGAs; SnPb vice SAC Balls

Joe Fjelstad <[log in to unmask]>

Fri, 28 Jul 2006 12:45:19 EDT

30 lines

New Thread

0.6mm Tg 130 PCB in RoHS process

0.6mm Tg 130 PCB in RoHS process

WTSJ-Willis Tam <[log in to unmask]>

Fri, 14 Jul 2006 11:45:44 +0800

44 lines

Re: 0.6mm Tg 130 PCB in RoHS process

Werner Engelmaier <[log in to unmask]>

Fri, 14 Jul 2006 09:37:17 EDT

26 lines

Re: 0.6mm Tg 130 PCB in RoHS process

Daniel Blass <[log in to unmask]>

Fri, 14 Jul 2006 08:32:36 -0500

29 lines

Re: 0.6mm Tg 130 PCB in RoHS process

Kane, Amol (349) <[log in to unmask]>

Fri, 14 Jul 2006 11:01:39 -0400

74 lines

Re: 0.6mm Tg 130 PCB in RoHS process

Ted Kong <[log in to unmask]>

Mon, 17 Jul 2006 17:36:38 -0700

70 lines

New Thread

6016 and 6012

6016 and 6012

Susan Mansilla <[log in to unmask]>

Thu, 20 Jul 2006 14:50:06 EDT

42 lines

Re: 6016 and 6012

Franklin D Asbell <[log in to unmask]>

Thu, 20 Jul 2006 16:18:54 -0500

82 lines

New Thread

AIR VAC DRS24 users

AIR VAC DRS24 users

Macko, Joe @ IEC <[log in to unmask]>

Tue, 25 Jul 2006 09:06:16 -0700

55 lines

Re: AIR VAC DRS24 users

Stadem, Richard D. <[log in to unmask]>

Tue, 25 Jul 2006 11:27:52 -0500

108 lines

Re: AIR VAC DRS24 users

bob wettermann <[log in to unmask]>

Tue, 25 Jul 2006 10:57:12 -0700

80 lines

New Thread

Alan Kreplick is out of the office.

Alan Kreplick is out of the office.

Alan Kreplick <[log in to unmask]>

Mon, 24 Jul 2006 13:36:38 -0400

24 lines

New Thread

Amphenol Plant in N.Y. Flooded...

Amphenol Plant in N.Y. Flooded...

Steve Gregory <[log in to unmask]>

Thu, 6 Jul 2006 16:00:24 -0500

32 lines

Re: Amphenol Plant in N.Y. Flooded...

Dave Seymour <[log in to unmask]>

Thu, 6 Jul 2006 17:06:16 -0400

67 lines

Re: Amphenol Plant in N.Y. Flooded...

Schierer, Kristin <[log in to unmask]>

Thu, 6 Jul 2006 17:13:31 -0400

96 lines

Re: Amphenol Plant in N.Y. Flooded...

Dave Simonik <[log in to unmask]>

Mon, 10 Jul 2006 08:33:46 -0400

73 lines

New Thread

Antw: Re: [TN] Surface Roughness (Out of office)

Antw: Re: [TN] Surface Roughness (Out of office)

Guenter Grossmann <[log in to unmask]>

Thu, 13 Jul 2006 16:58:08 +0200

23 lines

New Thread

Austin American Technology Corp 9600

Austin American Technology Corp 9600

bob wettermann <[log in to unmask]>

Fri, 7 Jul 2006 13:39:57 -0700

32 lines

Re: Austin American Technology Corp 9600

Dehoyos, Ramon <[log in to unmask]>

Mon, 10 Jul 2006 08:21:56 -0400

66 lines

New Thread

Auto Response from [log in to unmask]

Auto Response from [log in to unmask]

Guy Ramsey <[log in to unmask]>

Wed, 19 Jul 2006 00:04:48 -0700

25 lines

Auto Response from [log in to unmask]

Guy Ramsey <[log in to unmask]>

Wed, 19 Jul 2006 05:49:05 -0700

25 lines

New Thread

AW: [TN] osp over gold bond pads

AW: [TN] osp over gold bond pads

Kruschitz Herbert <[log in to unmask]>

Mon, 10 Jul 2006 08:26:44 +0200

91 lines

New Thread

Back in the USA

Back in the USA

John Burke <[log in to unmask]>

Mon, 17 Jul 2006 14:49:21 -0700

77 lines

New Thread

Barbara Burcham email address and business phone change

Barbara Burcham email address and business phone change

Barbara Burcham <[log in to unmask]>

Mon, 17 Jul 2006 11:26:11 -0500

56 lines

New Thread

BBT passed , after assembly getting shorted !

BBT passed , after assembly getting shorted !

Selva Suganthi <[log in to unmask]>

Tue, 25 Jul 2006 15:15:36 +0530

28 lines

Re: BBT passed , after assembly getting shorted !

Roland Jaquet <[log in to unmask]>

Tue, 25 Jul 2006 15:18:43 +0200

97 lines

Re: BBT passed , after assembly getting shorted !

Werner Engelmaier <[log in to unmask]>

Tue, 25 Jul 2006 09:50:12 EDT

27 lines

New Thread

BGA Pad Missing on Board

BGA Pad Missing on Board

Black, Paul <[log in to unmask]>

Mon, 17 Jul 2006 12:02:52 -0400

36 lines

Re: BGA Pad Missing on Board

Stadem, Richard D. <[log in to unmask]>

Mon, 17 Jul 2006 12:29:02 -0500

62 lines

New Thread

BGAs; SnPb vice SAC Balls

BGAs; SnPb vice SAC Balls

- Bogert <[log in to unmask]>

Thu, 27 Jul 2006 20:15:57 -0400

81 lines

Re: BGAs; SnPb vice SAC Balls

Wenger, George M. <[log in to unmask]>

Thu, 27 Jul 2006 20:56:32 -0400

132 lines

Re: BGAs; SnPb vice SAC Balls

Orna and Yehuda - Barak <[log in to unmask]>

Fri, 28 Jul 2006 14:31:49 +0300

172 lines

Re: BGAs; SnPb vice SAC Balls

Jeffrey Bush <[log in to unmask]>

Fri, 28 Jul 2006 09:59:06 -0400

117 lines

Re: BGAs; SnPb vice SAC Balls

Barmuta, Mike <[log in to unmask]>

Fri, 28 Jul 2006 07:34:00 -0700

157 lines

Re: BGAs; SnPb vice SAC Balls

Stadem, Richard D. <[log in to unmask]>

Fri, 28 Jul 2006 09:58:32 -0500

196 lines

Re: BGAs; SnPb vice SAC Balls

Danielle Casha <[log in to unmask]>

Fri, 28 Jul 2006 11:04:07 -0400

242 lines

Re: BGAs; SnPb vice SAC Balls

Stadem, Richard D. <[log in to unmask]>

Fri, 28 Jul 2006 10:14:53 -0500

346 lines

Re: BGAs; SnPb vice SAC Balls

Gilbert Roberge <[log in to unmask]>

Fri, 28 Jul 2006 11:36:12 -0400

376 lines

Re: BGAs; SnPb vice SAC Balls

[log in to unmask]

Fri, 28 Jul 2006 13:33:03 EDT

33 lines

Re: BGAs; SnPb vice SAC Balls

Mike Fenner <[log in to unmask]>

Fri, 28 Jul 2006 20:11:26 +0100

408 lines

Re: BGAs; SnPb vice SAC Balls

Orna and Yehuda - Barak <[log in to unmask]>

Fri, 28 Jul 2006 23:54:16 +0300

194 lines

Re: BGAs; SnPb vice SAC Balls

Barmuta, Mike <[log in to unmask]>

Mon, 31 Jul 2006 09:22:52 -0700

237 lines

New Thread

Blind Via Internal Annular Ring

Blind Via Internal Annular Ring

Jay Otts <[log in to unmask]>

Sun, 16 Jul 2006 06:39:48 +0000

21 lines

Re: Blind Via Internal Annular Ring

Wayne Thayer <[log in to unmask]>

Mon, 17 Jul 2006 09:32:14 -0400

59 lines

Re: Blind Via Internal Annular Ring

Orna and Yehuda - Barak <[log in to unmask]>

Tue, 18 Jul 2006 22:36:11 +0300

107 lines

Re: Blind Via Internal Annular Ring

Jay Otts <[log in to unmask]>

Tue, 18 Jul 2006 21:00:02 -0500

25 lines

Re: Blind Via Internal Annular Ring

Jay Otts <[log in to unmask]>

Tue, 18 Jul 2006 21:00:02 -0500

25 lines

Re: Blind Via Internal Annular Ring

Dennis Fritz <[log in to unmask]>

Wed, 19 Jul 2006 19:35:40 EDT

52 lines

New Thread

Blowholes pandemic

Re: Blowholes pandemic

Al Onderick <[log in to unmask]>

Tue, 11 Jul 2006 09:31:15 -0500

222 lines

Re: Blowholes pandemic

Lee Holloway <[log in to unmask]>

Tue, 11 Jul 2006 17:34:16 +0100

26 lines

Re: Blowholes pandemic

Dehoyos, Ramon <[log in to unmask]>

Wed, 12 Jul 2006 10:09:49 -0400

251 lines

Re: Blowholes pandemic

P. Langeveld <[log in to unmask]>

Wed, 12 Jul 2006 19:54:18 +0200

280 lines

Re: Blowholes pandemic

Lum Wee Mei <[log in to unmask]>

Sat, 22 Jul 2006 12:56:10 +0800

291 lines

Re: Blowholes pandemic

Mike Fenner <[log in to unmask]>

Mon, 24 Jul 2006 10:28:42 +0100

340 lines

Re: Blowholes pandemic

Dehoyos, Ramon <[log in to unmask]>

Mon, 24 Jul 2006 09:34:08 -0400

334 lines

Re: Blowholes pandemic

Lum Wee Mei <[log in to unmask]>

Mon, 24 Jul 2006 21:53:36 +0800

365 lines

Re: Blowholes pandemic

John Burke <[log in to unmask]>

Mon, 24 Jul 2006 09:56:06 -0700

391 lines

New Thread

BTU VIP 70 Exhaust Requirement

BTU VIP 70 Exhaust Requirement

Vinit Verma <[log in to unmask]>

Fri, 7 Jul 2006 11:41:59 +0530

37 lines

New Thread

Buried wire

Buried wire

Deac Descoteaux <[log in to unmask]>

Thu, 6 Jul 2006 09:42:54 -0400

56 lines

Re: Buried wire

Werner Engelmaier <[log in to unmask]>

Thu, 6 Jul 2006 18:29:58 EDT

27 lines

Re: Buried wire

Wayne Thayer <[log in to unmask]>

Thu, 6 Jul 2006 21:58:43 -0400

86 lines

New Thread

Corey A Peterson/Mequon/RA/Rockwell is out of the office.

Corey A Peterson/Mequon/RA/Rockwell is out of the office.

Corey A Peterson <[log in to unmask]>

Wed, 5 Jul 2006 10:17:44 -0500

31 lines

New Thread

Corrosion on Gold plating

Corrosion on Gold plating

antonio <[log in to unmask]>

Thu, 6 Jul 2006 10:46:13 -0300

30 lines

Re: Corrosion on Gold plating

Stadem, Richard D. <[log in to unmask]>

Thu, 6 Jul 2006 08:48:33 -0500

54 lines

Re: Corrosion on Gold plating

Frederick Miller <[log in to unmask]>

Thu, 6 Jul 2006 09:46:30 -0400

57 lines

Re: Corrosion on Gold plating

Stadem, Richard D. <[log in to unmask]>

Thu, 6 Jul 2006 09:23:38 -0500

78 lines

Re: Corrosion on Gold plating

Steve Gregory <[log in to unmask]>

Thu, 6 Jul 2006 10:57:07 -0500

65 lines

Re: Corrosion on Gold plating

Stadem, Richard D. <[log in to unmask]>

Thu, 6 Jul 2006 11:05:43 -0500

90 lines

Re: Corrosion on Gold plating

Dehoyos, Ramon <[log in to unmask]>

Thu, 6 Jul 2006 12:32:37 -0400

117 lines

Re: Corrosion on Gold plating

Stadem, Richard D. <[log in to unmask]>

Thu, 6 Jul 2006 13:02:18 -0500

103 lines

Re: Corrosion on Gold plating

Joe Russeau <[log in to unmask]>

Thu, 6 Jul 2006 14:09:36 -0400

108 lines

Re: Corrosion on Gold plating

Dehoyos, Ramon <[log in to unmask]>

Thu, 6 Jul 2006 14:16:15 -0400

144 lines

Re: Corrosion on Gold plating

Werner Engelmaier <[log in to unmask]>

Thu, 6 Jul 2006 18:27:21 EDT

33 lines

Re: Corrosion on Gold plating

Ingemar Hernefjord (KC/EMW) <[log in to unmask]>

Fri, 7 Jul 2006 09:36:37 +0200

80 lines

Re: Corrosion on Gold plating

Anil Kher <[log in to unmask]>

Fri, 7 Jul 2006 14:43:27 +0530

68 lines

Re: Corrosion on Gold plating

Leo Higgins <[log in to unmask]>

Fri, 7 Jul 2006 14:43:37 -0700

120 lines

New Thread

DecaBDE

DecaBDE

Kane, Amol (349) <[log in to unmask]>

Mon, 10 Jul 2006 11:46:12 -0400

51 lines

New Thread

Desiccant for Silver bds

Desiccant for Silver bds

Eddie Rocha <[log in to unmask]>

Tue, 11 Jul 2006 11:13:51 -0700

32 lines

Re: Desiccant for Silver bds

Kevin Glidden <[log in to unmask]>

Tue, 11 Jul 2006 15:06:56 -0400

65 lines

Re: Desiccant for Silver bds

Kevin Glidden <[log in to unmask]>

Tue, 11 Jul 2006 14:59:20 -0400

72 lines

New Thread

discontinue-

discontinue-

jim briguglio <[log in to unmask]>

Sat, 22 Jul 2006 12:45:17 -0700

22 lines

New Thread

Edge plating on copper core PCBs

Edge plating on copper core PCBs

Kevin Glidden <[log in to unmask]>

Mon, 10 Jul 2006 09:38:40 -0400

59 lines

Re: Edge plating on copper core PCBs

Colin McVean <[log in to unmask]>

Mon, 10 Jul 2006 14:44:58 +0100

119 lines

Re: Edge plating on copper core PCBs

Kevin Glidden <[log in to unmask]>

Tue, 11 Jul 2006 11:32:42 -0400

146 lines

New Thread

FA lab around the Bay Area

FA lab around the Bay Area

Ted Kong <[log in to unmask]>

Fri, 28 Jul 2006 16:48:06 -0700

37 lines

Re: FA lab around the Bay Area

Werner Engelmaier <[log in to unmask]>

Fri, 28 Jul 2006 19:56:04 EDT

30 lines

New Thread

Ferrous Plating of PCB

Ferrous Plating of PCB

John Parsons <[log in to unmask]>

Fri, 14 Jul 2006 09:03:16 -0700

45 lines

Re: Ferrous Plating of PCB

R Sedlak <[log in to unmask]>

Fri, 14 Jul 2006 13:35:48 -0700

68 lines

Re: Ferrous Plating of PCB

Donald Vischulis <[log in to unmask]>

Sat, 15 Jul 2006 06:28:44 -0500

68 lines

Re: Ferrous Plating of PCB

R Sedlak <[log in to unmask]>

Sat, 15 Jul 2006 04:40:20 -0700

82 lines

Re: Ferrous Plating of PCB

Donald Vischulis <[log in to unmask]>

Sun, 16 Jul 2006 05:56:37 -0500

101 lines

Re: Ferrous Plating of PCB

John Parsons <[log in to unmask]>

Mon, 17 Jul 2006 16:35:22 -0700

123 lines

New Thread

Flex Circuit Voltage Failures

Flex Circuit Voltage Failures

Steve Kelly <[log in to unmask]>

Fri, 14 Jul 2006 10:31:03 -0400

119 lines

Re: Flex Circuit Voltage Failures

Michael Kuczynski <[log in to unmask]>

Fri, 14 Jul 2006 10:35:54 -0400

141 lines

Re: Flex Circuit Voltage Failures

Paul Edwards <[log in to unmask]>

Fri, 14 Jul 2006 09:01:33 -0700

171 lines

Re: Flex Circuit Voltage Failures

Tom Stearns <[log in to unmask]>

Fri, 14 Jul 2006 12:28:43 -0400

49 lines

Re: Flex Circuit Voltage Failures

Steve Kelly <[log in to unmask]>

Fri, 14 Jul 2006 12:52:36 -0400

91 lines

Re: Flex Circuit Voltage Failures

ZLATKO BIJEDIC <[log in to unmask]>

Mon, 17 Jul 2006 18:39:15 -0700

139 lines

New Thread

FW: Colorado Designer's Council Vendor Faire Invitation

FW: Colorado Designer's Council Vendor Faire Invitation

Cheryl Johnson <[log in to unmask]>

Wed, 12 Jul 2006 12:03:13 -0600

73 lines

New Thread

Geometric Tolerance

Geometric Tolerance

Donald Kyle <[log in to unmask]>

Mon, 10 Jul 2006 10:09:47 -0500

54 lines

Re: Geometric Tolerance

Bob Wilson <[log in to unmask]>

Mon, 10 Jul 2006 08:46:51 -0700

114 lines

Re: Geometric Tolerance

Randy Morrison <[log in to unmask]>

Mon, 10 Jul 2006 09:05:07 -0700

105 lines

Re: Geometric Tolerance

Donald Vischulis <[log in to unmask]>

Mon, 10 Jul 2006 16:29:39 -0500

74 lines

Re: Geometric Tolerance

Donald Vischulis <[log in to unmask]>

Wed, 12 Jul 2006 20:37:54 -0500

122 lines

New Thread

Haven't we been here before?

Haven't we been here before?

R Sedlak <[log in to unmask]>

Mon, 31 Jul 2006 13:57:49 -0700

39 lines

Re: Haven't we been here before?

Dennis Fritz <[log in to unmask]>

Mon, 31 Jul 2006 17:03:53 EDT

29 lines

Re: Haven't we been here before?

Scott Decker <[log in to unmask]>

Mon, 31 Jul 2006 14:05:49 -0700

84 lines

Re: Haven't we been here before?

John Burke <[log in to unmask]>

Mon, 31 Jul 2006 15:13:09 -0700

83 lines

Re: Haven't we been here before?

John Burke <[log in to unmask]>

Mon, 31 Jul 2006 15:26:15 -0700

106 lines

Re: Haven't we been here before?

Chad Renando <[log in to unmask]>

Tue, 1 Aug 2006 08:58:48 +1000

142 lines

Re: Haven't we been here before?

Scott Decker <[log in to unmask]>

Mon, 31 Jul 2006 16:15:04 -0700

199 lines

Re: Haven't we been here before?

John Burke <[log in to unmask]>

Mon, 31 Jul 2006 15:21:45 -0700

126 lines

New Thread

HC-49 Crystals

HC-49 Crystals

Greg Major <[log in to unmask]>

Wed, 5 Jul 2006 08:18:59 +1200

33 lines

Re: HC-49 Crystals

Scott Decker <[log in to unmask]>

Wed, 5 Jul 2006 08:01:56 -0700

73 lines

New Thread

Humidity?

Re: Humidity?

Dehoyos, Ramon <[log in to unmask]>

Thu, 6 Jul 2006 09:05:59 -0400

119 lines

Re: Humidity?

[log in to unmask]

Thu, 6 Jul 2006 10:00:11 EDT

50 lines

Re: Humidity?

Tom Stearns <[log in to unmask]>

Thu, 6 Jul 2006 10:00:30 -0400

37 lines

Re: Humidity?

Wrobel, Clayton <[log in to unmask]>

Fri, 7 Jul 2006 09:47:34 -0400

141 lines

Re: Humidity?

Brian Ellis <[log in to unmask]>

Fri, 7 Jul 2006 17:51:38 +0300

225 lines

Re: Humidity?

Lee parker <[log in to unmask]>

Mon, 10 Jul 2006 09:36:35 -0400

260 lines

Re: Humidity?

Brian Ellis <[log in to unmask]>

Mon, 10 Jul 2006 18:44:11 +0300

369 lines

Re: Humidity?

Lee parker <[log in to unmask]>

Mon, 10 Jul 2006 16:47:02 -0400

403 lines

Re: Humidity?

Brian Ellis <[log in to unmask]>

Tue, 11 Jul 2006 14:07:11 +0300

591 lines

Re: Humidity?

Ivanoe Pedruzzi <[log in to unmask]>

Tue, 11 Jul 2006 14:08:30 +0200

687 lines

Re: Humidity?

Lee parker <[log in to unmask]>

Tue, 11 Jul 2006 15:27:28 -0400

627 lines

Re: Humidity?

Camille Good <[log in to unmask]>

Thu, 13 Jul 2006 16:42:51 -0700

535 lines

New Thread

Immersion Silver for ICT

Immersion Silver for ICT

Lin Leo <[log in to unmask]>

Wed, 19 Jul 2006 15:04:25 +0800

32 lines

Re: Immersion Silver for ICT

Darrel Therriault <[log in to unmask]>

Wed, 19 Jul 2006 08:56:32 -0700

83 lines

Re: Immersion Silver for ICT

John Burke <[log in to unmask]>

Wed, 19 Jul 2006 09:25:46 -0700

117 lines

Re: Immersion Silver for ICT

Stadem, Richard D. <[log in to unmask]>

Wed, 19 Jul 2006 12:32:42 -0500

146 lines

Re: Immersion Silver for ICT

David D. Hillman <[log in to unmask]>

Thu, 20 Jul 2006 07:25:51 -0500

173 lines

New Thread

IPC "Flex & Chips" Conference - July 24-25, 2006

IPC "Flex & Chips" Conference - July 24-25, 2006

Tina Nerad <[log in to unmask]>

Thu, 6 Jul 2006 08:27:47 -0500

33 lines

New Thread

IPC Advanced Troubleshooting the PCB Manufacturing Process - 8/2/06

IPC Advanced Troubleshooting the PCB Manufacturing Process - 8/2/06

Tina Nerad <[log in to unmask]>

Wed, 26 Jul 2006 13:51:57 -0500

49 lines

New Thread

IPC Lead Free Audit Program

IPC Lead Free Audit Program

JB <[log in to unmask]>

Mon, 24 Jul 2006 11:52:41 -0400

24 lines

New Thread

IPC webcast - Electroplating Technologies - 7/27/06

IPC webcast - Electroplating Technologies - 7/27/06

Tina Nerad <[log in to unmask]>

Mon, 24 Jul 2006 16:09:40 -0500

44 lines

Re: IPC webcast - Electroplating Technologies - 7/27/06

T Suresh Babu <[log in to unmask]>

Tue, 25 Jul 2006 09:23:05 +0530

75 lines

Re: IPC webcast - Electroplating Technologies - 7/27/06

Chezhian, Krishnan (Radhakrishnan) <[log in to unmask]>

Tue, 25 Jul 2006 13:19:27 +0800

220 lines

Re: IPC webcast - Electroplating Technologies - 7/27/06

Huynh Thanh Nhan <[log in to unmask]>

Tue, 25 Jul 2006 12:40:39 +0700

199 lines

Re: IPC webcast - Electroplating Technologies - 7/27/06

Chezhian, Krishnan (Radhakrishnan) <[log in to unmask]>

Tue, 25 Jul 2006 14:05:11 +0800

339 lines

Re: IPC webcast - Electroplating Technologies - 7/27/06

Donald Vischulis <[log in to unmask]>

Wed, 26 Jul 2006 20:48:57 -0500

262 lines

New Thread

IPC-A-610D

IPC-A-610D

Chafin, Ken G. <[log in to unmask]>

Mon, 10 Jul 2006 09:07:12 -0400

31 lines

Re: IPC-A-610D

Chad Renando <[log in to unmask]>

Mon, 10 Jul 2006 23:18:39 +1000

57 lines

Re: IPC-A-610D

Lance Mayes <[log in to unmask]>

Mon, 10 Jul 2006 07:51:03 -0600

85 lines

Re: IPC-A-610D

Stadem, Richard D. <[log in to unmask]>

Mon, 10 Jul 2006 08:41:37 -0500

66 lines

Re: IPC-A-610D

Jones, Evamaria <[log in to unmask]>

Mon, 10 Jul 2006 14:13:41 -0400

96 lines

Re: IPC-A-610D

Werner Engelmaier <[log in to unmask]>

Mon, 10 Jul 2006 21:11:11 EDT

29 lines

Re: IPC-A-610D

Chad Renando <[log in to unmask]>

Tue, 11 Jul 2006 11:24:51 +1000

54 lines

Re: IPC-A-610D

Werner Engelmaier <[log in to unmask]>

Mon, 10 Jul 2006 21:54:28 EDT

29 lines

Re: IPC-A-610D

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Tue, 11 Jul 2006 08:24:57 -0700

180 lines

Re: IPC-A-610D

Chafin, Ken G. <[log in to unmask]>

Mon, 17 Jul 2006 08:42:12 -0400

60 lines

New Thread

Last Chance to Register

Last Chance to Register

Nate Fitt <[log in to unmask]>

Wed, 12 Jul 2006 14:57:47 -0500

51 lines

New Thread

Last Chance to Register for the IPC Flex & Chips International Conference

Last Chance to Register for the IPC Flex & Chips International Conference

Nate Fitt <[log in to unmask]>

Fri, 14 Jul 2006 12:52:29 -0500

58 lines

Last Chance to Register for the IPC Flex & Chips International Conference

Nate Fitt <[log in to unmask]>

Tue, 18 Jul 2006 10:37:50 -0500

57 lines

New Thread

Last Chance to Register for the IPC International Flex and Chips Conference

Last Chance to Register for the IPC International Flex and Chips Conference

Nate Fitt <[log in to unmask]>

Mon, 17 Jul 2006 14:28:24 -0500

76 lines

New Thread

Last Chance to Register for the IPC RoHS Compliance Workshops

Last Chance to Register for the IPC RoHS Compliance Workshops

Nate Fitt <[log in to unmask]>

Tue, 18 Jul 2006 11:19:39 -0500

46 lines

New Thread

Last chance to register for the RoHS "Back to Basics" Workshops

Last chance to register for the RoHS "Back to Basics" Workshops

Nate Fitt <[log in to unmask]>

Thu, 13 Jul 2006 14:46:06 -0500

39 lines

New Thread

MIL-P-55110

MIL-P-55110

Kane, Joseph E (US SSA) <[log in to unmask]>

Thu, 27 Jul 2006 09:12:05 -0400

41 lines

Re: MIL-P-55110

ekalgren <[log in to unmask]>

Thu, 27 Jul 2006 09:46:09 -0400

75 lines

Re: MIL-P-55110

Franklin D Asbell <[log in to unmask]>

Thu, 27 Jul 2006 08:50:12 -0500

94 lines

Re: MIL-P-55110

- Bogert <[log in to unmask]>

Thu, 27 Jul 2006 19:30:47 -0400

114 lines

New Thread

NTC Palm Treo available in Europe? Nope!

NTC Palm Treo available in Europe? Nope!

Stephen Pierce <[log in to unmask]>

Fri, 7 Jul 2006 18:17:32 -0700

25 lines

Re: NTC Palm Treo available in Europe? Nope!

Joe Fjelstad <[log in to unmask]>

Sun, 9 Jul 2006 22:12:42 EDT

30 lines

New Thread

osp over gold bond pads

osp over gold bond pads

Cheryl Johnson <[log in to unmask]>

Thu, 6 Jul 2006 12:42:28 -0600

46 lines

Re: osp over gold bond pads

Ken Kirby <[log in to unmask]>

Thu, 6 Jul 2006 15:12:38 -0500

99 lines

Re: osp over gold bond pads

Joyce Koo <[log in to unmask]>

Thu, 6 Jul 2006 16:59:13 -0400

122 lines

Re: osp over gold bond pads

Lee parker <[log in to unmask]>

Thu, 6 Jul 2006 17:21:07 -0400

83 lines

Re: osp over gold bond pads

Ryan Grant <[log in to unmask]>

Thu, 6 Jul 2006 17:31:11 -0600

79 lines

Re: osp over gold bond pads

R Sedlak <[log in to unmask]>

Thu, 6 Jul 2006 16:57:27 -0700

73 lines

Re: osp over gold bond pads

Joyce Koo <[log in to unmask]>

Fri, 7 Jul 2006 08:50:25 -0400

111 lines

Re: osp over gold bond pads

Jerry Pariag <[log in to unmask]>

Fri, 7 Jul 2006 09:38:03 -0400

180 lines

New Thread

Out of Office

Out of Office

Paula Esty <[log in to unmask]>

Sat, 8 Jul 2006 17:24:53 -0400

27 lines

New Thread

Out Of The Office

Out Of The Office

Paul Ziarek <[log in to unmask]>

Sat, 15 Jul 2006 00:25:58 -0500

21 lines

New Thread

PCB Warpness

PCB Warpness

Dominguez Alejandro JuP/TEF8 <[log in to unmask]>

Fri, 7 Jul 2006 13:11:11 -0400

52 lines

Re: PCB Warpness

Franklin D Asbell <[log in to unmask]>

Fri, 7 Jul 2006 13:44:52 -0500

89 lines

Re: PCB Warpness

Dehoyos, Ramon <[log in to unmask]>

Fri, 7 Jul 2006 15:18:40 -0400

90 lines

New Thread

PCB Warpness Allowed on Second Pass?

PCB Warpness Allowed on Second Pass?

Dominguez Alejandro JuP/TEF8 <[log in to unmask]>

Mon, 10 Jul 2006 15:10:34 -0400

42 lines

New Thread

Porosity Testing

Porosity Testing

Victor G. Hernandez <[log in to unmask]>

Tue, 18 Jul 2006 10:45:10 -0500

29 lines

Re: Porosity Testing

Scott Westheimer <[log in to unmask]>

Tue, 18 Jul 2006 14:59:49 -0400

60 lines

Re: Porosity Testing

Joyce Koo <[log in to unmask]>

Tue, 18 Jul 2006 15:35:53 -0400

86 lines

Re: Porosity Testing

Anil Kher <[log in to unmask]>

Wed, 19 Jul 2006 11:29:00 +0530

124 lines

New Thread

recoating tin finish on qfn packages

recoating tin finish on qfn packages

Crepeau, Phil (Space Technology) <[log in to unmask]>

Wed, 5 Jul 2006 13:34:31 -0700

132 lines

New Thread

Recommended smt SnPb solder reflow profile temperature ramp rates

Recommended smt SnPb solder reflow profile temperature ramp rates

Macko, Joe @ IEC <[log in to unmask]>

Mon, 31 Jul 2006 12:14:36 -0700

38 lines

Re: Recommended smt SnPb solder reflow profile temperature ramp rates

[log in to unmask]

Mon, 31 Jul 2006 15:21:56 EDT

26 lines

Re: Recommended smt SnPb solder reflow profile temperature ramp rates

Stadem, Richard D. <[log in to unmask]>

Mon, 31 Jul 2006 14:46:46 -0500

79 lines

New Thread

Register now for IPC's webcast series on Printed Circuit Boards

Register now for IPC's webcast series on Printed Circuit Boards

Tina Nerad <[log in to unmask]>

Wed, 5 Jul 2006 15:57:46 -0500

49 lines

New Thread

Register now for IPC/JEDEC Int. Conf. on LF Components & Assemblies in Montreal, Canada on 8/16-17/06

Register now for IPC/JEDEC Int. Conf. on LF Components & Assemblies in Montreal, Canada on 8/16-17/06

Tina Nerad <[log in to unmask]>

Fri, 7 Jul 2006 08:22:42 -0500

46 lines

New Thread

Register now PCB Fabrication"Back to Basics" webcast series starting 7/13/06

Register now PCB Fabrication"Back to Basics" webcast series starting 7/13/06

Tina Nerad <[log in to unmask]>

Mon, 10 Jul 2006 16:27:04 -0500

44 lines

New Thread

Register Today for the Legislation-Compliant Electronic Assembly Workshop

Register Today for the Legislation-Compliant Electronic Assembly Workshop

Nate Fitt <[log in to unmask]>

Fri, 14 Jul 2006 12:43:08 -0500

44 lines

New Thread

Register Today for These Upcoming Lead Free Events

Register Today for These Upcoming Lead Free Events

Nate Fitt <[log in to unmask]>

Wed, 12 Jul 2006 11:15:38 -0500

46 lines

New Thread

Registration Reminder for IPC's Back to Basics Webcast Series & PCB Manufacturing Process Workshop

Registration Reminder for IPC's Back to Basics Webcast Series & PCB Manufacturing Process Workshop

Nate Fitt <[log in to unmask]>

Mon, 17 Jul 2006 14:45:58 -0500

76 lines

New Thread

Registration Reminder for the IPC Lead Free Solderable Finishes Webcast Series

Registration Reminder for the IPC Lead Free Solderable Finishes Webcast Series

Nate Fitt <[log in to unmask]>

Thu, 20 Jul 2006 11:57:45 -0500

59 lines

New Thread

Registration Reminder for the IPC Legislation-Compliant Electronic Assembly Workshop

Registration Reminder for the IPC Legislation-Compliant Electronic Assembly Workshop

Nate Fitt <[log in to unmask]>

Fri, 21 Jul 2006 11:42:22 -0500

47 lines

New Thread

Registration Reminder for the IPC PCB Manufacturing Process

Registration Reminder for the IPC PCB Manufacturing Process

Nate Fitt <[log in to unmask]>

Wed, 19 Jul 2006 13:42:28 -0500

55 lines

New Thread

Registration Reminder for the IPC/JEDEC International Lead Free Conference in Montreal

Registration Reminder for the IPC/JEDEC International Lead Free Conference in Montreal

Nate Fitt <[log in to unmask]>

Fri, 21 Jul 2006 11:35:14 -0500

61 lines

New Thread

Rocha Laminate Voids..

Re: Rocha Laminate Voids..

Jose Marroquin <[log in to unmask]>

Wed, 5 Jul 2006 10:37:06 -0700

66 lines

Re: Rocha Laminate Voids..

Jeffrey Bush <[log in to unmask]>

Wed, 5 Jul 2006 14:46:02 -0400

107 lines

Re: Rocha Laminate Voids..

Steve Gregory <[log in to unmask]>

Wed, 5 Jul 2006 13:54:34 -0500

117 lines

Re: Rocha Laminate Voids..

Stadem, Richard D. <[log in to unmask]>

Wed, 5 Jul 2006 14:04:34 -0500

127 lines

New Thread

ROHS

ROHS

Dehoyos, Ramon <[log in to unmask]>

Thu, 27 Jul 2006 14:35:11 -0400

31 lines

New Thread

RoHS 5 and RoHS 6

RoHS 5 and RoHS 6

Joel Alexander <[log in to unmask]>

Tue, 18 Jul 2006 09:06:38 -0400

27 lines

Re: RoHS 5 and RoHS 6

Kane, Amol (349) <[log in to unmask]>

Tue, 18 Jul 2006 09:34:12 -0400

87 lines

New Thread

RoHS Day

RoHS Day

Randy Bock Sr. <[log in to unmask]>

Mon, 3 Jul 2006 11:16:12 -0400

39 lines

Re: RoHS Day

Reuven ROKAH <[log in to unmask]>

Tue, 4 Jul 2006 07:55:43 +0300

93 lines

Re: RoHS Day

Chad Renando <[log in to unmask]>

Tue, 4 Jul 2006 15:08:54 +1000

118 lines

New Thread

Roller Tinning Process

Roller Tinning Process

Baski Devre <[log in to unmask]>

Wed, 12 Jul 2006 18:38:57 +0300

46 lines

Re: Roller Tinning Process

R Sedlak <[log in to unmask]>

Wed, 12 Jul 2006 10:21:19 -0700

68 lines

Re: Roller Tinning Process

Mike Fenner <[log in to unmask]>

Thu, 13 Jul 2006 09:30:39 +0100

98 lines

Re: Roller Tinning Process

R Sedlak <[log in to unmask]>

Thu, 13 Jul 2006 04:02:16 -0700

118 lines

Re: Roller Tinning Process

Baski Devre <[log in to unmask]>

Thu, 13 Jul 2006 16:26:55 +0300

208 lines

Re: Roller Tinning Process

Peter Lymn <[log in to unmask]>

Thu, 13 Jul 2006 14:32:43 +0100

78 lines

Re: Roller Tinning Process

Baski Devre <[log in to unmask]>

Thu, 13 Jul 2006 16:51:22 +0300

121 lines

Re: Roller Tinning Process

Peter Lymn <[log in to unmask]>

Thu, 13 Jul 2006 15:08:07 +0100

148 lines

Re: Roller Tinning Process

Mike Fenner <[log in to unmask]>

Thu, 13 Jul 2006 15:55:36 +0100

160 lines

Re: Roller Tinning Process

R Sedlak <[log in to unmask]>

Thu, 13 Jul 2006 08:03:37 -0700

192 lines

Re: Roller Tinning Process

Mike Fenner <[log in to unmask]>

Thu, 13 Jul 2006 16:14:01 +0100

238 lines

Re: Roller Tinning Process

Baski Devre <[log in to unmask]>

Thu, 13 Jul 2006 19:14:47 +0300

312 lines

Re: Roller Tinning Process

Baski Devre <[log in to unmask]>

Thu, 13 Jul 2006 19:18:32 +0300

288 lines

Re: Roller Tinning Process

R Sedlak <[log in to unmask]>

Thu, 13 Jul 2006 17:14:47 -0700

258 lines

Re: Roller Tinning Process

Mike Fenner <[log in to unmask]>

Fri, 14 Jul 2006 09:38:35 +0100

332 lines

New Thread

SAC 305 Pb Free Wave Solder Profile Help

SAC 305 Pb Free Wave Solder Profile Help

Chris Schaefer <[log in to unmask]>

Fri, 21 Jul 2006 09:38:45 -0500

53 lines

New Thread

SAC-BGAs on ENIG Using SnPb solder paste

SAC-BGAs on ENIG Using SnPb solder paste

Happy Holden <[log in to unmask]>

Mon, 31 Jul 2006 14:18:58 -0400

64 lines

Re: SAC-BGAs on ENIG Using SnPb solder paste

John Burke <[log in to unmask]>

Mon, 31 Jul 2006 11:48:51 -0700

113 lines

Re: SAC-BGAs on ENIG Using SnPb solder paste

Paul Edwards <[log in to unmask]>

Mon, 31 Jul 2006 12:38:43 -0700

131 lines

Re: SAC-BGAs on ENIG Using SnPb solder paste

Kerry McMullen <[log in to unmask]>

Mon, 31 Jul 2006 16:05:25 -0400

182 lines

Re: SAC-BGAs on ENIG Using SnPb solder paste

Paul Edwards <[log in to unmask]>

Mon, 31 Jul 2006 13:20:53 -0700

244 lines

Re: SAC-BGAs on ENIG Using SnPb solder paste

Kerry McMullen <[log in to unmask]>

Mon, 31 Jul 2006 16:24:06 -0400

292 lines

Re: SAC-BGAs on ENIG Using SnPb solder paste

Paul Edwards <[log in to unmask]>

Mon, 31 Jul 2006 14:48:48 -0700

349 lines

New Thread

SAC105 BGA ball

SAC105 BGA ball

don_well <[log in to unmask]>

Thu, 6 Jul 2006 12:00:25 +0800

21 lines

New Thread

Setup/tear down loss

Setup/tear down loss

Davis, Larry <[log in to unmask]>

Fri, 7 Jul 2006 12:07:50 -0700

46 lines

Re: Setup/tear down loss

Ron Peeler <[log in to unmask]>

Fri, 7 Jul 2006 15:15:44 -0400

88 lines

Re: Setup/tear down loss

Jerry Dengler <[log in to unmask]>

Fri, 7 Jul 2006 15:34:30 -0400

74 lines

Re: Setup/tear down loss

Davis, Larry <[log in to unmask]>

Fri, 7 Jul 2006 13:12:29 -0700

124 lines

New Thread

silver anti-tarnish

silver anti-tarnish

Eddie Rocha <[log in to unmask]>

Mon, 17 Jul 2006 14:05:00 -0700

30 lines

Re: silver anti-tarnish

Lee parker <[log in to unmask]>

Mon, 17 Jul 2006 17:38:37 -0400

68 lines

Re: silver anti-tarnish

R Sedlak <[log in to unmask]>

Mon, 17 Jul 2006 18:00:49 -0700

33 lines

Re: silver anti-tarnish

Eddie Rocha <[log in to unmask]>

Tue, 18 Jul 2006 08:27:38 -0700

67 lines

Re: silver anti-tarnish

Lee parker <[log in to unmask]>

Tue, 18 Jul 2006 11:28:58 -0400

104 lines

Re: silver anti-tarnish

Dennis Fritz <[log in to unmask]>

Tue, 18 Jul 2006 12:01:15 EDT

26 lines

Re: silver anti-tarnish

Dehoyos, Ramon <[log in to unmask]>

Tue, 18 Jul 2006 12:11:33 -0400

59 lines

Re: silver anti-tarnish

Jeffrey Bush <[log in to unmask]>

Tue, 18 Jul 2006 12:30:10 -0400

102 lines

New Thread

Simple Green Industrial Products

Simple Green Industrial Products

Phil Nutting <[log in to unmask]>

Mon, 10 Jul 2006 16:54:39 -0400

30 lines

Re: Simple Green Industrial Products

EIMCNews <[log in to unmask]>

Mon, 10 Jul 2006 14:40:57 -0700

58 lines

New Thread

So long guys

So long guys

Jason Gregory <[log in to unmask]>

Fri, 28 Jul 2006 07:59:56 -0500

48 lines

Re: So long guys

Randy Bock Sr. <[log in to unmask]>

Fri, 28 Jul 2006 09:03:01 -0400

101 lines

Re: So long guys

Kerry McMullen <[log in to unmask]>

Fri, 28 Jul 2006 09:03:24 -0400

97 lines

Re: So long guys

Bob Arciolla <[log in to unmask]>

Fri, 28 Jul 2006 09:16:30 -0400

83 lines

Re: So long guys

Joyce Koo <[log in to unmask]>

Fri, 28 Jul 2006 09:17:17 -0400

73 lines

Re: So long guys

Charlie McMahon <[log in to unmask]>

Fri, 28 Jul 2006 09:20:34 -0400

90 lines

Re: So long guys

Dehoyos, Ramon <[log in to unmask]>

Fri, 28 Jul 2006 09:46:37 -0400

108 lines

Re: So long guys

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 28 Jul 2006 06:51:06 -0700

82 lines

Re: So long guys

Stadem, Richard D. <[log in to unmask]>

Fri, 28 Jul 2006 09:02:11 -0500

101 lines

Re: So long guys

Stadem, Richard D. <[log in to unmask]>

Fri, 28 Jul 2006 09:00:22 -0500

74 lines

Re: So long guys

Joe Fjelstad <[log in to unmask]>

Fri, 28 Jul 2006 10:07:22 EDT

26 lines

Re: So long guys

Bloomquist, Ken <[log in to unmask]>

Fri, 28 Jul 2006 07:08:42 -0700

62 lines

Re: So long guys

Jeffrey Bush <[log in to unmask]>

Fri, 28 Jul 2006 10:01:18 -0400

88 lines

Re: So long guys

Graham Naisbitt <[log in to unmask]>

Fri, 28 Jul 2006 16:04:44 +0100

92 lines

Re: So long guys

John Burke <[log in to unmask]>

Fri, 28 Jul 2006 08:39:03 -0700

76 lines

Re: So long guys

Kevin Glidden <[log in to unmask]>

Fri, 28 Jul 2006 11:59:13 -0400

78 lines

Re: So long guys

Camille Good <[log in to unmask]>

Fri, 28 Jul 2006 10:25:39 -0700

70 lines

Re: So long guys

Steve Gregory <[log in to unmask]>

Fri, 28 Jul 2006 14:58:28 -0500

81 lines

Re: So long guys

Steve Gregory <[log in to unmask]>

Fri, 28 Jul 2006 15:01:42 -0500

78 lines

Re: So long guys

Jason Gregory <[log in to unmask]>

Fri, 28 Jul 2006 15:06:02 -0500

107 lines

Re: So long guys

Joe Fjelstad <[log in to unmask]>

Fri, 28 Jul 2006 16:22:21 EDT

28 lines

Re: So long guys

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Fri, 28 Jul 2006 13:25:56 -0700

107 lines

Re: So long guys

Scott Decker <[log in to unmask]>

Fri, 28 Jul 2006 13:35:05 -0700

60 lines

Re: So long guys

Joyce Koo <[log in to unmask]>

Fri, 28 Jul 2006 16:49:35 -0400

129 lines

Re: So long guys

Hfjord <[log in to unmask]>

Sat, 29 Jul 2006 12:03:04 +0200

82 lines

Re: So long guys

ZLATKO BIJEDIC <[log in to unmask]>

Sat, 29 Jul 2006 07:14:32 -0700

67 lines

Re: So long guys

Steve Gregory <[log in to unmask]>

Mon, 31 Jul 2006 07:52:29 -0500

110 lines

Re: So long guys

Scott Decker <[log in to unmask]>

Mon, 31 Jul 2006 08:48:29 -0700

140 lines

New Thread

So long guys NTC

Re: So long guys NTC

Cheryl Johnson <[log in to unmask]>

Fri, 28 Jul 2006 09:20:26 -0600

133 lines

New Thread

Solder balls

Solder balls

Carl Beharry <[log in to unmask]>

Fri, 7 Jul 2006 15:58:08 -0400

52 lines

Re: Solder balls

Bob Arciolla <[log in to unmask]>

Fri, 7 Jul 2006 16:25:33 -0400

73 lines

Re: Solder balls

Stadem, Richard D. <[log in to unmask]>

Sat, 8 Jul 2006 16:23:18 -0500

144 lines

Re: Solder balls

P. Langeveld <[log in to unmask]>

Sun, 9 Jul 2006 11:18:01 +0200

76 lines

New Thread

Solder Paste Dispensing Question

Solder Paste Dispensing Question

Dacia Schoolfield <[log in to unmask]>

Thu, 13 Jul 2006 15:25:34 -0500

37 lines

Re: Solder Paste Dispensing Question

Gilbert Roberge <[log in to unmask]>

Thu, 13 Jul 2006 16:46:56 -0400

74 lines

New Thread

Stalking High-Tech Sweatshops

Re: Stalking High-Tech Sweatshops

Ivanoe Pedruzzi <[log in to unmask]>

Sun, 2 Jul 2006 14:10:21 +0200

66 lines

New Thread

Stress Strain of ENiG

Stress Strain of ENiG

Paul Reid <[log in to unmask]>

Wed, 5 Jul 2006 12:14:40 -0400

40 lines

Re: Stress Strain of ENiG

Werner Engelmaier <[log in to unmask]>

Wed, 5 Jul 2006 16:29:36 EDT

28 lines

Re: Stress Strain of ENiG

Paul Reid <[log in to unmask]>

Wed, 5 Jul 2006 16:52:44 -0400

58 lines

New Thread

Surface Roughness

Surface Roughness

Baski Devre <[log in to unmask]>

Thu, 13 Jul 2006 16:38:17 +0300

49 lines

Re: Surface Roughness

R Sedlak <[log in to unmask]>

Thu, 13 Jul 2006 07:56:38 -0700

80 lines

Re: Surface Roughness

Dennis Fritz <[log in to unmask]>

Thu, 13 Jul 2006 22:36:33 EDT

39 lines

Re: Surface Roughness

ZLATKO BIJEDIC <[log in to unmask]>

Thu, 13 Jul 2006 20:11:35 -0700

80 lines

Re: Surface Roughness

Jeffrey Bush <[log in to unmask]>

Fri, 14 Jul 2006 09:28:48 -0400

133 lines

Re: Surface Roughness

R Sedlak <[log in to unmask]>

Fri, 14 Jul 2006 13:42:48 -0700

130 lines

Re: Surface Roughness

Baski Devre <[log in to unmask]>

Sat, 15 Jul 2006 08:08:26 +0300

209 lines

New Thread

temporary attachment of a BGA to a PCB for test

temporary attachment of a BGA to a PCB for test

Macko, Joe @ IEC <[log in to unmask]>

Thu, 20 Jul 2006 10:16:14 -0700

57 lines

Re: temporary attachment of a BGA to a PCB for test

Martin Butcher <[log in to unmask]>

Thu, 20 Jul 2006 10:19:32 -0700

85 lines

Re: temporary attachment of a BGA to a PCB for test

Scott Decker <[log in to unmask]>

Thu, 20 Jul 2006 10:30:13 -0700

94 lines

Re: temporary attachment of a BGA to a PCB for test

Danielle Casha <[log in to unmask]>

Thu, 20 Jul 2006 13:21:04 -0400

93 lines

Re: temporary attachment of a BGA to a PCB for test

John Burke <[log in to unmask]>

Thu, 20 Jul 2006 10:53:40 -0700

90 lines

Re: temporary attachment of a BGA to a PCB for test

Stadem, Richard D. <[log in to unmask]>

Thu, 20 Jul 2006 13:05:56 -0500

89 lines

Re: temporary attachment of a BGA to a PCB for test

Stadem, Richard D. <[log in to unmask]>

Thu, 20 Jul 2006 13:00:35 -0500

91 lines

Re: temporary attachment of a BGA to a PCB for test

Stadem, Richard D. <[log in to unmask]>

Thu, 20 Jul 2006 16:00:50 -0500

114 lines

Re: temporary attachment of a BGA to a PCB for test

P. Langeveld <[log in to unmask]>

Fri, 21 Jul 2006 11:15:30 +0200

137 lines

Re: temporary attachment of a BGA to a PCB for test

Ted Kong <[log in to unmask]>

Wed, 26 Jul 2006 09:55:45 -0700

231 lines

New Thread

thick stencils

thick stencils

Kevin Glidden <[log in to unmask]>

Tue, 25 Jul 2006 13:07:46 -0400

32 lines

New Thread

Validy of Teardropped vias?

Validy of Teardropped vias?

Barbara Burcham <[log in to unmask]>

Thu, 6 Jul 2006 08:17:21 -0500

55 lines

Re: Validy of Teardropped vias?

Stadem, Richard D. <[log in to unmask]>

Thu, 6 Jul 2006 08:34:27 -0500

78 lines

Re: Validy of Teardropped vias?

Wayne Thayer <[log in to unmask]>

Thu, 6 Jul 2006 09:32:11 -0400

86 lines

Re: Validy of Teardropped vias?

Anslow, Phillip <[log in to unmask]>

Thu, 6 Jul 2006 15:04:06 +0100

144 lines

Re: Validy of Teardropped vias?

Chris Ball <[log in to unmask]>

Thu, 6 Jul 2006 09:48:39 -0400

103 lines

Re: Validy of Teardropped vias?

Werner Engelmaier <[log in to unmask]>

Thu, 6 Jul 2006 18:21:50 EDT

31 lines

Re: Validy of Teardropped vias?

Whittaker, Dewey (EHCOE) <[log in to unmask]>

Mon, 10 Jul 2006 08:09:17 -0700

83 lines

New Thread

Vias under parts

Vias under parts

No Name <[log in to unmask]>

Tue, 25 Jul 2006 15:10:49 -0700

38 lines

Re: Vias under parts

Susan Mansilla <[log in to unmask]>

Tue, 25 Jul 2006 19:14:58 EDT

24 lines

Re: Vias under parts

John Burke <[log in to unmask]>

Tue, 25 Jul 2006 16:52:27 -0700

88 lines

New Thread

Vibration testing

Vibration testing

Martin Butcher <[log in to unmask]>

Fri, 28 Jul 2006 08:56:11 -0700

41 lines

Re: Vibration testing

Wayne Thayer <[log in to unmask]>

Fri, 28 Jul 2006 13:09:50 -0400

93 lines

Re: Vibration testing

Bob Wilson <[log in to unmask]>

Fri, 28 Jul 2006 10:28:12 -0700

112 lines

New Thread

Water Cleaning No Clean FLux from a PCBA

Water Cleaning No Clean FLux from a PCBA

Michael Forrester <[log in to unmask]>

Wed, 26 Jul 2006 16:15:07 -0400

44 lines

Re: Water Cleaning No Clean FLux from a PCBA

Steve Gregory <[log in to unmask]>

Wed, 26 Jul 2006 15:25:03 -0500

71 lines

Re: Water Cleaning No Clean FLux from a PCBA

Schaefer, Chris <[log in to unmask]>

Thu, 27 Jul 2006 08:55:01 -0500

132 lines

New Thread

What causing dewetting on HASL pcb

What causing dewetting on HASL pcb

sumxp <[log in to unmask]>

Wed, 26 Jul 2006 09:38:24 -0500

34 lines

Re: What causing dewetting on HASL pcb

Lee parker <[log in to unmask]>

Wed, 26 Jul 2006 12:10:40 -0400

75 lines

Re: What causing dewetting on HASL pcb

Joyce Koo <[log in to unmask]>

Wed, 26 Jul 2006 12:50:26 -0400

104 lines

Re: What causing dewetting on HASL pcb

Jeffrey Bush <[log in to unmask]>

Wed, 26 Jul 2006 14:48:31 -0400

85 lines

Re: What causing dewetting on HASL pcb

Brian Ellis <[log in to unmask]>

Thu, 27 Jul 2006 12:07:35 +0300

68 lines

New Thread

Whats a good way to verify material is Ti vs Stainless?

Whats a good way to verify material is Ti vs Stainless?

Rodney Miller <[log in to unmask]>

Mon, 24 Jul 2006 10:18:39 -0500

32 lines

Re: Whats a good way to verify material is Ti vs Stainless?

JB <[log in to unmask]>

Mon, 24 Jul 2006 11:50:50 -0400

25 lines

Re: Whats a good way to verify material is Ti vs Stainless?

Lee parker <[log in to unmask]>

Mon, 24 Jul 2006 12:10:00 -0400

65 lines

Re: Whats a good way to verify material is Ti vs Stainless?

John Burke <[log in to unmask]>

Mon, 24 Jul 2006 09:51:09 -0700

58 lines

Re: Whats a good way to verify material is Ti vs Stainless?

R Sedlak <[log in to unmask]>

Mon, 24 Jul 2006 10:13:58 -0700

58 lines

Re: Whats a good way to verify material is Ti vs Stainless?

Martin Butcher <[log in to unmask]>

Mon, 24 Jul 2006 10:14:56 -0700

93 lines

Re: Whats a good way to verify material is Ti vs Stainless?

R Sedlak <[log in to unmask]>

Mon, 24 Jul 2006 12:04:03 -0700

116 lines

Re: Whats a good way to verify material is Ti vs Stainless?

Brian Ellis <[log in to unmask]>

Tue, 25 Jul 2006 17:18:06 +0300

57 lines

Re: Whats a good way to verify material is Ti vs Stainless?

Rodney Miller <[log in to unmask]>

Tue, 25 Jul 2006 11:17:18 -0500

145 lines

Re: Whats a good way to verify material is Ti vs Stainless?

P. Langeveld <[log in to unmask]>

Sat, 29 Jul 2006 18:54:58 +0200

178 lines

New Thread

[IPC-600-6012] Inspection area of coupons

Re: [IPC-600-6012] Inspection area of coupons

Werner Engelmaier <[log in to unmask]>

Thu, 20 Jul 2006 19:37:12 EDT

36 lines

New Thread

[LF] Price premium for Tg = 170 Deg C?

Re: [LF] Price premium for Tg = 170 Deg C?

Werner Engelmaier <[log in to unmask]>

Mon, 17 Jul 2006 21:44:07 EDT

50 lines

New Thread

[LF] [TN] RoHS 5 and RoHS 6

Re: [LF] [TN] RoHS 5 and RoHS 6

Kane, Amol (349) <[log in to unmask]>

Wed, 19 Jul 2006 08:48:22 -0400

246 lines

New Thread

[NTC] Haven't we been here before?

Re: [NTC] Haven't we been here before?

R Sedlak <[log in to unmask]>

Mon, 31 Jul 2006 16:45:22 -0700

129 lines

New Thread

[NTC] SAC-BGAs on ENIG Using SnPb solder paste

Re: [NTC] SAC-BGAs on ENIG Using SnPb solder paste

Scott Decker <[log in to unmask]>

Mon, 31 Jul 2006 11:52:06 -0700

165 lines

New Thread

[NTC] [TN] Haven't we been here before?

Re: [NTC] [TN] Haven't we been here before?

Martin Butcher <[log in to unmask]>

Mon, 31 Jul 2006 14:19:42 -0700

109 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager