TECHNET Archives

April 2002

TechNet@IPC.ORG
Options: Hide Table of Contents

- Off Topic- ... you´ve been a wonderful audience ... (2 Messages)
0402 stencil apperture design (4 Messages)
0402 tombstone problem (20 Messages)
20 Mhz crystal start-up woes (8 Messages)
2002 Texas Designers Learning Symposium (1 Message)
30% Bonus Depreciation (1 Message)
3D Pcb supplier info (2 Messages)
A "NEDA" Oriented label... (1 Message)
Accelerated test for simulation of storage of PCBs with surface finish white tin (4 Messages)
aging test with metal plating (4 Messages)
Aluminium Electrolytics (6 Messages)
Aluminium Electrolytics (Euros) (3 Messages)
AM79C970AVIW (or not) (2 Messages)
Antw: [TN] Any SIPAD users? (1 Message)
Antw: [TN] test method to detect solder joint weakness (1 Message)
Antw: [TN] Thermal testing (1 Message)
Any SIPAD users? (8 Messages)
Assembly sampling plan (2 Messages)
Attn Savafi-Bayat [TN] Via in Pad (1 Message)
Bake before Conformal Coat (5 Messages)
Bar Code Standards (7 Messages)
Benchmarking Quality in Electronics Contract Manufacturing (3 Messages)
BGA ball temperature in WS process (2 Messages)
BGA flex circuit failure (4 Messages)
BGA Microscopes (3 Messages)
BGA re-balling (4 Messages)
BGA underfill process (5 Messages)
BGA/Highspeed Design Technologies (4 Messages)
blind & buried (1 Message)
Boards Cleaning (3 Messages)
Bonding of metal stiffeners onto flex (1 Message)
BOW/WARP (3 Messages)
Chart for similar / dissimilar metals (8 Messages)
Chemistry of discoloration? (5 Messages)
Coloration differences between batches of flex circuits (3 Messages)
Comments Request for IPC Halogen-Free Position Paper (1 Message)
Component Lead Touch-up (2 Messages)
Component reclaim (1 Message)
Conformal Coating BGA's (3 Messages)
Conformal Coating Shadow Curing Problems (5 Messages)
Congress, off shore components, and the DoD (1 Message)
connecting aluminum to copper (6 Messages)
Contact Resistant on the Board (2 Messages)
Contract House Placement Costs (5 Messages)
Conveyor Belt (4 Messages)
Copper exposed on components (1 Message)
core fill (4 Messages)
Cracking Chip Resistors (20 Messages)
cupric chloride (2 Messages)
Depanelization - Cracked Chip Caps (16 Messages)
End Cap/Resistor problems (3 Messages)
end joint width vs. side joint length (1 Message)
ESD Smocks (1 Message)
ESS Beginner looking for recommendations (8 Messages)
ESSENTIAL MLB STUFF (4 Messages)
ESSENTIAL MLB STUFF CONTINUED (1 Message)
FAB Question: laminate - 1 ply or 2?? (2 Messages)
Failure rate to Package Size (1 Message)
Filter Recommendation (1 Message)
flex coverlayer min. spacing from any interconnect / via (1 Message)
Flip-flop panels (9 Messages)
Flip-flop panels... thanks (1 Message)
Flux application SIPAD (1 Message)
Freeze Spray Trouble Shooting (16 Messages)
Gold Plating (4 Messages)
Gold Plating Electroless vs. Immersion (2 Messages)
Got my boards and lost my house (4 Messages)
Hand cleaners (8 Messages)
Hand cleaners, Orange Oil based (2 Messages)
HDIC (3 Messages)
Heatsink attachment prior to reflow soldering (1 Message)
Hole cracking of Teflon PCB after screwing (3 Messages)
Humorous Stories (2 Messages)
Immersion Gold Vs Immersion Tin for 0201 landpatterns (5 Messages)
Immersion Silver (31 Messages)
Immersion vs. Electroless Understandings (1 Message)
Indium Solder (2 Messages)
Insulation in the crimp contact area (7 Messages)
Interesting question (10 Messages)
Ionic Contamination for No Clean Flux (2 Messages)
IPC DESIGNERS LEARNING SYMPOSIUMS - TEXAS & CANADA (1 Message)
IPC SMT FOOTPRINT DESIGN GUIDELINES VS SUPPLIERS (2 Messages)
IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS (46 Messages)
IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS - and for custom components? (1 Message)
IPC SMT FOOTPRINT DESIGN GUIDLINES/ Philips Guidelines (2 Messages)
IPC-4101 - ARLON 25N (1 Message)
IPC-A-610 has been DoD Adopted ! (2 Messages)
Labor Price difference for 1-up v/s 4-up (4 Messages)
LARGE PWB (2 Messages)
lighting and J STD 001 (2 Messages)
Listserv etiquette (1 Message)
Looking for Dwayne Kincade (1 Message)
Looking for Happy Holden (7 Messages)
Looking for laser drill service company. (2 Messages)
Looking for used oven in Canada (1 Message)
Manual printing tables... (4 Messages)
Measuring "No Clean" process quality (1 Message)
Mechanical Strength of Solder Joints (1 Message)
Microscopes (11 Messages)
Microvias and rigid-flex in one board shop? (9 Messages)
MIL Standard (7 Messages)
MIL-C-28809 Replacement/supersede (1 Message)
Military Designs (3 Messages)
naive questions (3 Messages)
New Kid on the block (3 Messages)
Nickel Test (6 Messages)
NTC Gold Plating Electroless vs. Immersion (8 Messages)
Off Topic - The Married Spud & other burning questions (11 Messages)
off topic- married spud & hand cleaner (1 Message)
OSP (22 Messages)
OSP Re: [TN] Immersion Silver (3 Messages)
PCB Drill press (3 Messages)
pedantry (1 Message)
Peelable Soldermask (2 Messages)
Philips Signetics SCC 68692 Dual UART (2 Messages)
Pot washers! (4 Messages)
Powered up burn- in test (4 Messages)
PREPREG (5 Messages)
Problem with the List Server ? ? ? (1 Message)
Proposed lifting of component date code restrictions (23 Messages)
PWB Fab Resource (1 Message)
question - 2 parts (1 Message)
Question on Rework (2 Messages)
Redesign Via in Pad (2 Messages)
Removal of Cured Nomenclature Ink (4 Messages)
Repair of Circuit with Solder Paste below (7 Messages)
Sealant Recommendations? (5 Messages)
Secondary reflow over wave... (7 Messages)
Senju sparkle noclean paste (2 Messages)
Serial number intelligence.. (2 Messages)
Shorts in PLCC Sockets (6 Messages)
Sign off (1 Message)
Silver (5 Messages)
Single Sided Boards - Solder fillets (1 Message)
Single-sided board and warp (3 Messages)
Single-sided/Double-sided PCB Reliability (6 Messages)
SIPAD flux choices (3 Messages)
SIPAD Shelf Life (2 Messages)
SNEC Meeting (2 Messages)
Solder alloy for 1010 Steel (4 Messages)
Solder Ball Wrinkles (4 Messages)
Spell checks (7 Messages)
Suggestion to IPC, was Re: [TN] NTC Gold Plating Electr oless vs. Immersion (1 Message)
Suggestion to IPC, was Re: [TN] NTC Gold Plating Electroless vs. Immersion (1 Message)
TAIYOYUDEN CERAMIC CAPS (4 Messages)
TEMP EXTREME (6 Messages)
Temperature Extreme (1 Message)
test for film residue (6 Messages)
test method to detect solder joint weakness (12 Messages)
test method to detect solder joint weakness - Connector Fretting (1 Message)
The effect to printing from pas vs soldermask height (2 Messages)
Thermal testing (2 Messages)
Through hole components in Reflow (3 Messages)
Tin whiskers and immersion tin coatings (12 Messages)
TPCA Show 2002 and Forum (1 Message)
Trace width to carry high current (7 Messages)
uBGA routing (2 Messages)
Vacuum sealing equipment... (1 Message)
Via in Pad (13 Messages)
Via in Pad: Filling of vias using silver epoxy!?!? (3 Messages)
Via Plug (15 Messages)
Vias in pads (17 Messages)
Voids on BGA (6 Messages)
Wanted: AM79C970AVIW (2 Messages)
Wanted: CM auditor (1 Message)
White residue on LPI Solder Mask coated (and incompletel y cured) PWAs, Is it a technical concern? (1 Message)
White residue on LPI Solder Mask coated (and incompletely cured) PWAs, Is it a technical concern? (2 Messages)
White residue on LPI Solder Mask coated (and incompletelycured)PWAs, Is it a technical concern? (2 Messages)
WRONG FORUM Congress, off shore components, and the DoD (1 Message)
[TN] Immersion Gold Vs Immersion Tin for 0201 landpatterns (1 Message)

Subject Sorted by Subject, Chronologically

From

Date
New Thread - Off Topic- ... you´ve been a wonderful audience ...
Re: - Off Topic- ... you´ve been a wonderful audience ...
Earl Moon
Wed, 17 Apr 2002 06:03:42 -0500
- Off Topic- ... you´ve been a wonderful audience ...
Busko, Wolfgang
Wed, 17 Apr 2002 12:06:01 +0200
New Thread 0402 stencil apperture design
Re: 0402 stencil apperture design
D.Terstegge
Sat, 27 Apr 2002 00:22:07 +0200
Re: 0402 stencil apperture design
Roger Stoops
Fri, 26 Apr 2002 16:10:03 -0400
Re: 0402 stencil apperture design
Ahne Oosterhof
Fri, 26 Apr 2002 10:54:22 -0700
0402 stencil apperture design
peter lee
Fri, 26 Apr 2002 07:57:35 -0700
New Thread 0402 tombstone problem
Re: 0402 tombstone problem
<>
Thu, 11 Apr 2002 16:08:14 +0800
Re: 0402 tombstone problem
Dan R. Johnson
Wed, 10 Apr 2002 11:51:09 -0700
Re: 0402 tombstone problem
Bev Christian
Wed, 10 Apr 2002 14:49:26 -0400
Re: 0402 tombstone problem
Earl Moon
Wed, 10 Apr 2002 12:40:27 -0500
Re: 0402 tombstone problem
Randy Bock Sr.
Wed, 10 Apr 2002 13:36:02 -0400
Re: 0402 tombstone problem
D.Terstegge
Wed, 10 Apr 2002 19:30:59 +0200
Re: 0402 tombstone problem
Jac Kroeker
Wed, 10 Apr 2002 09:42:20 -0700
Re: 0402 tombstone problem
Kathy Kuhlow
Wed, 10 Apr 2002 11:30:07 -0500
Re: 0402 tombstone problem
Mickey Weiner
Wed, 10 Apr 2002 11:13:08 -0500
Re: 0402 tombstone problem
Creswick, Steven
Wed, 10 Apr 2002 12:21:08 -0400
Re: 0402 tombstone problem
Dunn, Dwayne
Wed, 10 Apr 2002 10:24:49 -0500
Re: 0402 tombstone problem
Tempea, Ioan
Wed, 10 Apr 2002 11:16:31 -0400
Re: 0402 tombstone problem
Dan R. Johnson
Wed, 10 Apr 2002 07:22:15 -0700
Re: 0402 tombstone problem
Bev Christian
Wed, 10 Apr 2002 08:46:18 -0400
Re: 0402 tombstone problem
McGlaughlin, Jeffrey A
Wed, 10 Apr 2002 07:36:29 -0400
Re: 0402 tombstone problem
Peter Lee
Tue, 9 Apr 2002 21:06:55 -0700
Re: 0402 tombstone problem
<>
Tue, 9 Apr 2002 23:12:57 EDT
Re: 0402 tombstone problem
David Fish
Tue, 9 Apr 2002 20:27:05 -0700
Re: 0402 tombstone problem
Randy Bock Sr.
Tue, 9 Apr 2002 15:26:22 -0400
0402 tombstone problem
Edward S. Wheeler
Tue, 9 Apr 2002 13:59:10 -0400
New Thread 20 Mhz crystal start-up woes
Re: 20 Mhz crystal start-up woes
Seth Goodman
Tue, 23 Apr 2002 20:03:37 -0500
Re: 20 Mhz crystal start-up woes
JaMi Smith
Tue, 23 Apr 2002 10:19:34 -0700
Re: 20 Mhz crystal start-up woes
Jason
Tue, 23 Apr 2002 10:33:10 -0500
Re: 20 Mhz crystal start-up woes
Brian Ellis
Tue, 23 Apr 2002 15:36:43 +0300
Re: 20 Mhz crystal start-up woes
Guy Ramsey
Tue, 23 Apr 2002 07:44:29 -0400
Re: 20 Mhz crystal start-up woes
Dieselberg, Ron
Tue, 23 Apr 2002 06:14:13 -0400
Re: 20 Mhz crystal start-up woes
Rob Legg
Mon, 22 Apr 2002 15:30:02 -0400
20 Mhz crystal start-up woes
Jason
Mon, 22 Apr 2002 11:24:15 -0500
New Thread 2002 Texas Designers Learning Symposium
2002 Texas Designers Learning Symposium
Stephannie Caliendo
Thu, 4 Apr 2002 17:16:09 -0600
New Thread 30% Bonus Depreciation
30% Bonus Depreciation
John Kania
Wed, 3 Apr 2002 14:06:27 -0500
New Thread 3D Pcb supplier info
Re: 3D Pcb supplier info
Joe Fjelstad
Mon, 15 Apr 2002 01:20:02 EDT
3D Pcb supplier info
David Bailey
Sun, 14 Apr 2002 21:47:48 -0500
New Thread A "NEDA" Oriented label...
A "NEDA" Oriented label...
<>
Tue, 30 Apr 2002 23:14:12 EDT
New Thread Accelerated test for simulation of storage of PCBs with surface finish white tin
Re: Accelerated test for simulation of storage of PCBs with surface finish white tin
Dave Hillman
Thu, 25 Apr 2002 18:33:43 -0500
Re: Accelerated test for simulation of storage of PCBs with surface finish white tin
WEEKES, MICHAEL HS-SNS
Thu, 25 Apr 2002 13:54:28 -0400
Re: Accelerated test for simulation of storage of PCBs with surface finish white tin
Guy Ramsey
Thu, 25 Apr 2002 13:38:32 -0400
Accelerated test for simulation of storage of PCBs with surface finish white tin
Peter Hefti
Thu, 25 Apr 2002 09:29:50 +0200
New Thread aging test with metal plating
Re: aging test with metal plating
Dennis Fritz
Tue, 16 Apr 2002 11:34:59 EDT
Re: aging test with metal plating
Mary Lin
Tue, 16 Apr 2002 10:37:23 -0400
Re: aging test with metal plating
David Douthit
Mon, 15 Apr 2002 18:16:25 -0700
aging test with metal plating
Mary Lin
Mon, 15 Apr 2002 16:57:59 -0400
New Thread Aluminium Electrolytics
Re: Aluminium Electrolytics
Seth Goodman
Thu, 4 Apr 2002 20:23:58 -0600
Re: Aluminium Electrolytics
DUTTON Phil
Fri, 5 Apr 2002 10:32:01 +1000
Re: Aluminium Electrolytics
Seth Goodman
Wed, 3 Apr 2002 23:08:52 -0600
Re: Aluminium Electrolytics
Wright, Michael D.
Wed, 3 Apr 2002 11:33:02 -0500
Re: Aluminium Electrolytics
Brian Ellis
Tue, 2 Apr 2002 12:00:01 +0300
Aluminium Electrolytics
DUTTON Phil
Tue, 2 Apr 2002 17:47:47 +1000
New Thread Aluminium Electrolytics (Euros)
Re: Aluminium Electrolytics (Euros)
Seth Goodman
Thu, 4 Apr 2002 20:37:38 -0600
Re: Aluminium Electrolytics (Euros)
Brian Ellis
Thu, 4 Apr 2002 14:48:30 +0300
Re: Aluminium Electrolytics (Euros)
Alan Groves
Thu, 4 Apr 2002 11:04:30 +0100
New Thread AM79C970AVIW (or not)
Re: AM79C970AVIW (or not)
<>
Wed, 24 Apr 2002 21:44:39 EDT
AM79C970AVIW (or not)
<>
Thu, 25 Apr 2002 08:43:21 +0800
New Thread Antw: [TN] Any SIPAD users?
Antw: [TN] Any SIPAD users?
Guenter Grossmann
Mon, 8 Apr 2002 10:09:57 +0200
New Thread Antw: [TN] test method to detect solder joint weakness
Antw: [TN] test method to detect solder joint weakness
Guenter Grossmann
Wed, 10 Apr 2002 09:12:46 +0200
New Thread Antw: [TN] Thermal testing
Antw: [TN] Thermal testing
Guenter Grossmann
Thu, 4 Apr 2002 12:48:42 +0200
New Thread Any SIPAD users?
Re: Any SIPAD users?
Bev Christian
Mon, 8 Apr 2002 11:09:02 -0400
Re: Any SIPAD users?
Robert B. Denbo
Mon, 8 Apr 2002 09:01:12 -0500
Re: Any SIPAD users?
Robert B. Denbo
Mon, 8 Apr 2002 08:59:30 -0500
Re: Any SIPAD users?
Busko, Wolfgang
Mon, 8 Apr 2002 15:17:52 +0200
Re: Any SIPAD users?
Ted Tontis
Mon, 8 Apr 2002 07:50:08 -0500
Re: Any SIPAD users?
Gary Camac
Mon, 8 Apr 2002 05:32:36 -0500
Re: Any SIPAD users?
Robert B. Denbo
Fri, 5 Apr 2002 21:39:19 -0600
Any SIPAD users?
<>
Fri, 5 Apr 2002 18:33:18 EST
New Thread Assembly sampling plan
Re: Assembly sampling plan
Sauer, Steven T.
Fri, 5 Apr 2002 11:35:16 -0500
Assembly sampling plan
Alain Savard
Fri, 5 Apr 2002 09:20:53 -0500
New Thread Attn Savafi-Bayat [TN] Via in Pad
Attn Savafi-Bayat [TN] Via in Pad
Rob Legg
Fri, 5 Apr 2002 12:59:27 -0500
New Thread Bake before Conformal Coat
Re: Bake before Conformal Coat
FOX, Ian (York Rd)
Tue, 9 Apr 2002 08:37:18 +0100
Re: Bake before Conformal Coat
Brian Ellis
Tue, 9 Apr 2002 09:05:56 +0300
Re: Bake before Conformal Coat
Graham Naisbitt
Mon, 8 Apr 2002 23:26:14 +0100
Re: Bake before Conformal Coat
Lee Whiteman
Mon, 8 Apr 2002 15:42:47 -0400
Bake before Conformal Coat
Phil Nutting
Mon, 8 Apr 2002 12:12:51 -0400
New Thread Bar Code Standards
Re: Bar Code Standards
Randy Bock Sr.
Wed, 24 Apr 2002 12:25:04 -0400
Re: Bar Code Standards
David Fish
Wed, 24 Apr 2002 10:06:29 -0700
Re: Bar Code Standards
Randy Bock Sr.
Tue, 23 Apr 2002 07:37:17 -0400
Re: Bar Code Standards
Jack Bryant
Mon, 22 Apr 2002 20:49:19 -0400
Re: Bar Code Standards
Dewey Whittaker
Mon, 22 Apr 2002 06:38:20 -0700
Re: Bar Code Standards
Randy Bock Sr.
Mon, 22 Apr 2002 08:53:33 -0400
Bar Code Standards
Bernard, David
Mon, 22 Apr 2002 09:54:04 +0100
New Thread Benchmarking Quality in Electronics Contract Manufacturing
Re: Benchmarking Quality in Electronics Contract Manufacturing
Richard Carruth
Thu, 11 Apr 2002 09:57:43 -0500
Re: Benchmarking Quality in Electronics Contract Manufacturing
Randy Bock Sr.
Thu, 11 Apr 2002 07:35:05 -0400
Benchmarking Quality in Electronics Contract Manufacturing
Kevin Stokes
Wed, 10 Apr 2002 15:55:52 -0500
New Thread BGA ball temperature in WS process
Re: BGA ball temperature in WS process
<>
Tue, 9 Apr 2002 00:04:42 EDT
BGA ball temperature in WS process
don_well
Tue, 9 Apr 2002 11:38:19 +0800
New Thread BGA flex circuit failure
Re: BGA flex circuit failure
Alfson, Geordie (STP)
Wed, 10 Apr 2002 08:03:57 -0500
Re: BGA flex circuit failure
Eric Christison
Wed, 10 Apr 2002 13:36:44 +0100
Re: BGA flex circuit failure
Randy Bock Sr.
Wed, 10 Apr 2002 07:37:51 -0400
BGA flex circuit failure
Alfson, Geordie (STP)
Tue, 9 Apr 2002 14:50:13 -0500
New Thread BGA Microscopes
Re: BGA Microscopes
McMullen, Kerry
Tue, 23 Apr 2002 15:14:04 -0400
Re: BGA Microscopes
Edward S. Wheeler
Tue, 23 Apr 2002 13:38:06 -0400
BGA Microscopes
<>
Tue, 23 Apr 2002 11:27:40 -0400
New Thread BGA re-balling
Re: BGA re-balling
Ed Popielarski
Tue, 9 Apr 2002 07:40:48 -0700
Re: BGA re-balling
Sauer, Steven T.
Mon, 8 Apr 2002 16:29:09 -0400
Re: BGA re-balling
Marsico, James
Mon, 8 Apr 2002 13:01:35 -0400
BGA re-balling
Tempea, Ioan
Mon, 8 Apr 2002 10:35:28 -0400
New Thread BGA underfill process
Re: BGA underfill process
Werner Engelmaier
Sat, 6 Apr 2002 18:52:19 EST
Re: BGA underfill process
Leo Roos
Fri, 5 Apr 2002 07:06:38 -0800
Re: BGA underfill process
Joe Fjelstad
Fri, 5 Apr 2002 09:28:42 EST
Re: BGA underfill process
Barry Gallegos
Fri, 5 Apr 2002 07:05:52 -0700
BGA underfill process
Peter Lee
Fri, 5 Apr 2002 00:02:09 -0800
New Thread BGA/Highspeed Design Technologies
Re: BGA/Highspeed Design Technologies
JaMi Smith
Tue, 2 Apr 2002 12:52:06 -0800
Re: BGA/Highspeed Design Technologies
JaMi Smith
Tue, 2 Apr 2002 12:40:39 -0800
Re: BGA/Highspeed Design Technologies
Earl Moon
Tue, 2 Apr 2002 06:50:41 -0600
BGA/Highspeed Design Technologies
Janine Badcock
Tue, 2 Apr 2002 13:27:33 +0100
New Thread blind & buried
blind & buried
Dee Stover
Mon, 8 Apr 2002 12:41:27 -0700
New Thread Boards Cleaning
Re: Boards Cleaning
Randy Bock Sr.
Mon, 22 Apr 2002 08:50:40 -0400
Re: Boards Cleaning
Brian Ellis
Mon, 22 Apr 2002 15:49:37 +0300
Boards Cleaning
Marki Sasportas
Mon, 22 Apr 2002 14:23:55 +0200
New Thread Bonding of metal stiffeners onto flex
Bonding of metal stiffeners onto flex
Steve Kelly
Fri, 19 Apr 2002 13:36:38 -0400
New Thread BOW/WARP
Re: BOW/WARP
WEEKES, MICHAEL HS-SNS
Thu, 25 Apr 2002 13:48:45 -0400
bow/warp
K HERK
Thu, 25 Apr 2002 10:47:06 -0700
BOW/WARP
K HERK
Thu, 25 Apr 2002 09:11:08 -0700
New Thread Chart for similar / dissimilar metals
Re: Chart for similar / dissimilar metals
Crepeau, Phil
Mon, 22 Apr 2002 11:50:15 -0700
Re: Chart for similar / dissimilar metals
Keith Calhoun
Mon, 22 Apr 2002 14:32:22 -0400
Re: Chart for similar / dissimilar metals
Dave Hillman
Mon, 22 Apr 2002 13:30:38 -0500
Re: Chart for similar / dissimilar metals
Pelkey, Glenn
Mon, 22 Apr 2002 11:04:59 -0700
Re: Chart for similar / dissimilar metals
Thorup, John
Mon, 22 Apr 2002 10:47:51 -0700
Re: Chart for similar / dissimilar metals
Jorge Santana
Mon, 22 Apr 2002 12:08:41 -0500
Re: Chart for similar / dissimilar metals
Rudy Sedlak
Mon, 22 Apr 2002 12:48:40 EDT
Chart for similar / dissimilar metals
Phil Nutting
Mon, 22 Apr 2002 12:05:10 -0400
New Thread Chemistry of discoloration?
Re: Chemistry of discoloration?
Mcmaster, Michael
Mon, 29 Apr 2002 11:48:59 -0700
Re: Chemistry of discoloration?
Jana Carraway
Thu, 11 Apr 2002 14:04:51 -0700
Re: Chemistry of discoloration?
Rudy Sedlak
Thu, 11 Apr 2002 15:10:48 EDT
Re: Chemistry of discoloration?
Bill Butman
Thu, 11 Apr 2002 11:37:58 -0700
Re: Chemistry of discoloration?
Jana Carraway
Thu, 11 Apr 2002 09:36:08 -0700
New Thread Coloration differences between batches of flex circuits
Re: Coloration differences between batches of flex circuits
Steve Kelly
Thu, 11 Apr 2002 12:13:53 -0400
Re: Coloration differences between batches of flex circuits
Randy Bock Sr.
Thu, 11 Apr 2002 10:16:30 -0400
Coloration differences between batches of flex circuits
Houston, Terri
Thu, 11 Apr 2002 06:54:39 -0600
New Thread Comments Request for IPC Halogen-Free Position Paper
Comments Request for IPC Halogen-Free Position Paper
Tom Newton
Thu, 4 Apr 2002 13:21:14 -0600
New Thread Component Lead Touch-up
Re: Component Lead Touch-up
Randy Bock Sr.
Wed, 10 Apr 2002 16:02:58 -0400
Component Lead Touch-up
McMullen, Kerry
Wed, 10 Apr 2002 14:36:31 -0400
New Thread Component reclaim
Component reclaim
Peter Barton
Fri, 12 Apr 2002 13:32:00 +0100
New Thread Conformal Coating BGA's
Re: Conformal Coating BGA's
Dave Hillman
Wed, 3 Apr 2002 09:48:41 -0600
Re: Conformal Coating BGA's
Brian Ellis
Tue, 2 Apr 2002 09:03:38 +0300
Re: Conformal Coating BGA's
Dave Hillman
Mon, 1 Apr 2002 12:53:39 -0600
New Thread Conformal Coating Shadow Curing Problems
Re: Conformal Coating Shadow Curing Problems
Graham Naisbitt
Mon, 8 Apr 2002 23:26:20 +0100
Re: Conformal Coating Shadow Curing Problems
<>
Fri, 5 Apr 2002 11:48:42 EST
Re: Conformal Coating Shadow Curing Problems
Leo Roos
Fri, 5 Apr 2002 07:03:34 -0800
Re: Conformal Coating Shadow Curing Problems
Graham Naisbitt
Fri, 5 Apr 2002 13:00:10 +0100
Conformal Coating Shadow Curing Problems
Mark E. Schumacher
Thu, 4 Apr 2002 13:11:39 -0500
New Thread Congress, off shore components, and the DoD
Congress, off shore components, and the DoD
David Douthit
Tue, 9 Apr 2002 12:25:43 -0700
New Thread connecting aluminum to copper
Re: connecting aluminum to copper
Seth Goodman
Wed, 17 Apr 2002 00:34:38 -0500
Re: connecting aluminum to copper
Mike Fenner
Fri, 12 Apr 2002 08:51:39 +0100
Re: connecting aluminum to copper
<>
Thu, 11 Apr 2002 16:25:19 +0800
Re: connecting aluminum to copper
Brian Ellis
Thu, 11 Apr 2002 09:20:16 +0300
Re: connecting aluminum to copper
Mark E. Schumacher
Wed, 10 Apr 2002 17:08:52 -0400
connecting aluminum to copper
Phil Nutting
Wed, 10 Apr 2002 16:12:27 -0400
New Thread Contact Resistant on the Board
Re: Contact Resistant on the Board
Randy Bock Sr.
Mon, 22 Apr 2002 08:48:34 -0400
Contact Resistant on the Board
YH Koh
Mon, 22 Apr 2002 06:31:46 -0500
New Thread Contract House Placement Costs
Re: Contract House Placement Costs
Kathy Kuhlow
Wed, 24 Apr 2002 16:05:35 -0500
Re: Contract House Placement Costs
Marsico, James
Wed, 24 Apr 2002 15:03:50 -0400
Re: Contract House Placement Costs
<>
Wed, 24 Apr 2002 12:12:36 EDT
Re: Contract House Placement Costs
bonilla_d
Wed, 24 Apr 2002 11:32:08 -0400
Contract House Placement Costs
Edward S. Wheeler
Wed, 24 Apr 2002 10:31:12 -0400
New Thread Conveyor Belt
Re: Conveyor Belt
Ed Popielarski
Tue, 23 Apr 2002 06:19:06 -0700
Re: Conveyor belt
Rob Legg
Mon, 22 Apr 2002 15:07:43 -0400
Re: Conveyor belt
Don Vischulis
Mon, 22 Apr 2002 10:46:14 -0500
Conveyor belt
Golembiewski, Ray
Mon, 22 Apr 2002 08:56:45 -0400
New Thread Copper exposed on components
Copper exposed on components
Connie Korth
Fri, 12 Apr 2002 10:24:58 -0500
New Thread core fill
Re: core fill
MA Ranganath/SMPLB/SEC/SANMAR
Thu, 18 Apr 2002 14:09:18 +0530
Re: core fill
Robert B. Denbo
Wed, 10 Apr 2002 14:52:31 -0500
Re: core fill
<>
Wed, 10 Apr 2002 15:11:13 -0400
core fill
tony steinke
Wed, 10 Apr 2002 14:06:46 -0700
New Thread Cracking Chip Resistors
Re: Cracking Chip Resistors
Dave Hillman
Fri, 19 Apr 2002 17:15:23 -0500
Re: Cracking Chip Resistors
Earl Moon
Wed, 17 Apr 2002 17:30:39 -0500
Re: Cracking Chip Resistors
Alan Groves
Wed, 17 Apr 2002 22:55:47 +0100
Re: Cracking Chip Resistors
Earl Moon
Wed, 17 Apr 2002 15:54:20 -0500
Re: Cracking Chip Resistors
David Ricketts
Wed, 17 Apr 2002 13:24:15 -0700
Re: Cracking Chip Resistors
Earl Moon
Wed, 17 Apr 2002 09:32:05 -0500
Re: Cracking Chip Resistors
Earl Moon
Wed, 17 Apr 2002 10:24:06 -0400
Re: Cracking Chip Resistors
<>
Wed, 17 Apr 2002 08:02:58 -0500
Re: Cracking Chip Resistors
Earl Moon
Wed, 17 Apr 2002 06:07:53 -0500
Re: Cracking Chip Resistors
Creswick, Steven
Wed, 17 Apr 2002 06:49:50 -0400
Re: Cracking Chip Resistors
Earl Moon
Wed, 17 Apr 2002 01:39:54 -0500
Re: Cracking Chip Resistors
Earl Moon
Wed, 17 Apr 2002 01:13:11 -0500
Re: Cracking Chip Resistors
Brian Ellis
Wed, 17 Apr 2002 09:04:21 +0300
Re: Cracking Chip Resistors
<>
Wed, 17 Apr 2002 11:29:09 +0800
Re: Cracking Chip Resistors
Earl Moon
Tue, 16 Apr 2002 12:28:29 -0500
Re: Cracking Chip Resistors
Donald Kyle
Tue, 16 Apr 2002 11:41:21 -0500
Re: Cracking Chip Resistors
Creswick, Steven
Tue, 16 Apr 2002 12:44:09 -0400
Re: Cracking Chip Resistors
Brian Ellis
Tue, 16 Apr 2002 18:30:56 +0300
Re: Cracking Chip Resistors
Earl Moon
Tue, 16 Apr 2002 09:58:16 -0500
Cracking Chip Resistors
Dave Hillman
Tue, 16 Apr 2002 09:27:55 -0500
New Thread cupric chloride
Re: cupric chloride
Rudy Sedlak
Mon, 22 Apr 2002 21:41:39 EDT
cupric chloride
Russell Burdick
Mon, 22 Apr 2002 14:59:30 -0700
New Thread Depanelization - Cracked Chip Caps
Re: Depanelization - Cracked Chip Caps
Mark E. Schumacher
Tue, 16 Apr 2002 15:58:01 -0400
Re: Depanelization - Cracked Chip Caps
Randy Bock Sr.
Tue, 16 Apr 2002 12:54:16 -0400
Re: Depanelization - Cracked Chip Caps
Earl Moon
Tue, 16 Apr 2002 11:28:22 -0500
Re: Depanelization - Cracked Chip Caps
Dan R. Johnson
Tue, 16 Apr 2002 08:35:23 -0700
Re: Depanelization - Cracked Chip Caps
Earl Moon
Tue, 16 Apr 2002 10:10:20 -0500
Re: Depanelization - Cracked Chip Caps
<>
Tue, 16 Apr 2002 10:56:13 EDT
Re: Depanelization - Cracked Chip Caps
Mark E. Schumacher
Tue, 16 Apr 2002 09:13:53 -0400
Re: Depanelization - Cracked Chip Caps
Earl Moon
Tue, 16 Apr 2002 05:12:55 -0500
Re: Depanelization - Cracked Chip Caps
<>
Mon, 15 Apr 2002 21:38:58 EDT
Re: Depanelization - Cracked Chip Caps
Earl Moon
Mon, 15 Apr 2002 20:08:54 -0500
Re: Depanelization - Cracked Chip Caps
<>
Mon, 15 Apr 2002 21:06:42 EDT
Re: Depanelization - Cracked Chip Caps
Earl Moon
Mon, 15 Apr 2002 19:17:13 -0500
Re: Depanelization - Cracked Chip Caps
<>
Mon, 15 Apr 2002 19:35:38 EDT
Re: Depanelization - Cracked Chip Caps
<>
Mon, 15 Apr 2002 19:24:52 EDT
Re: Depanelization - Cracked Chip Caps
Alex Krstic
Mon, 15 Apr 2002 16:26:33 -0600
Depanelization - Cracked Chip Caps
Mark E. Schumacher
Mon, 15 Apr 2002 16:56:45 -0400
New Thread End Cap/Resistor problems
Re: End Cap/Resistor problems
David Douthit
Tue, 16 Apr 2002 17:13:43 -0700
Re: End Cap/Resistor problems
Mark E. Schumacher
Tue, 16 Apr 2002 17:53:31 -0400
End Cap/Resistor problems
Michael Bell
Wed, 17 Apr 2002 09:30:15 +1200
New Thread end joint width vs. side joint length
end joint width vs. side joint length
Tom Moore
Mon, 29 Apr 2002 13:28:19 -0400
New Thread ESD Smocks
Re: ESD Smocks
Blomberg, Rainer (FL51)
Mon, 1 Apr 2002 14:00:19 -0500
New Thread ESS Beginner looking for recommendations
Re: ESS Beginner looking for recommendations
<>
Thu, 11 Apr 2002 16:13:02 +0800
Re: ESS Beginner looking for recommendations
James TerVeen
Wed, 10 Apr 2002 15:52:16 -0400
Re: ESS Beginner looking for recommendations
Randy Bock Sr.
Wed, 10 Apr 2002 15:36:10 -0400
Re: ESS Beginner looking for recommendations
Hinners Hans M Civ WRALC/LUGE
Wed, 10 Apr 2002 19:59:15 +0100
Re: ESS Beginner looking for recommendations
<>
Mon, 8 Apr 2002 13:00:27 +0800
Re: ESS Beginner looking for recommendations
David Fish
Wed, 3 Apr 2002 21:47:29 -0800
Re: ESS Beginner looking for recommendations
David Douthit
Wed, 3 Apr 2002 17:08:15 -0700
ESS Beginner looking for recommendations
Hinners Hans M Civ WRALC/LUGE
Wed, 3 Apr 2002 21:32:55 +0100
New Thread ESSENTIAL MLB STUFF
Re: ESSENTIAL MLB STUFF
D.Terstegge
Thu, 25 Apr 2002 19:47:43 +0200
Re: ESSENTIAL MLB STUFF
Bloomquist, Ken
Thu, 25 Apr 2002 09:28:42 -0700
Re: ESSENTIAL MLB STUFF
d. terstegge
Thu, 25 Apr 2002 15:39:49 +0200
ESSENTIAL MLB STUFF
Earl Moon
Thu, 25 Apr 2002 06:31:29 -0500
New Thread ESSENTIAL MLB STUFF CONTINUED
ESSENTIAL MLB STUFF CONTINUED
Earl Moon
Fri, 26 Apr 2002 07:11:41 -0500
New Thread FAB Question: laminate - 1 ply or 2??
Re: FAB Question: laminate - 1 ply or 2??
LINO REBOREDO
Sat, 27 Apr 2002 16:30:46 +0000
FAB Question: laminate - 1 ply or 2??
Pete Jones
Thu, 25 Apr 2002 09:55:27 -0400
New Thread Failure rate to Package Size
Failure rate to Package Size
Ken Carlile
Thu, 25 Apr 2002 15:04:58 -0500
New Thread Filter Recommendation
Filter Recommendation
<>
Fri, 19 Apr 2002 14:51:00 -0500
New Thread flex coverlayer min. spacing from any interconnect / via
flex coverlayer min. spacing from any interconnect / via
WEEKES, MICHAEL HS-SNS
Thu, 25 Apr 2002 15:12:44 -0400
New Thread Flip-flop panels
Re: Flip-flop panels
Robert B. Denbo
Mon, 29 Apr 2002 11:26:26 -0500
Re: Flip-flop panels
Frank Kimmey
Mon, 29 Apr 2002 09:21:19 -0700
Re: Flip-flop panels
Tempea, Ioan
Mon, 29 Apr 2002 12:21:19 -0400
Re: Flip-flop panels
Tempea, Ioan
Mon, 29 Apr 2002 09:40:09 -0400
Re: Flip-flop panels
Eddie Rocha
Wed, 24 Apr 2002 15:44:48 -0700
Re: Flip-flop panels
Robert B. Denbo
Mon, 22 Apr 2002 21:25:43 -0500
Re: Flip-flop panels
Jac Kroeker
Mon, 22 Apr 2002 08:52:15 -0700
Re: Flip-flop panels
Beerman, Dennis
Mon, 22 Apr 2002 10:04:04 -0500
Flip-flop panels
Tempea, Ioan
Mon, 22 Apr 2002 10:15:32 -0400
New Thread Flip-flop panels... thanks
Flip-flop panels... thanks
Tempea, Ioan
Tue, 23 Apr 2002 09:13:20 -0400
New Thread Flux application SIPAD
Flux application SIPAD
Matt Kehoe
Thu, 11 Apr 2002 05:48:11 -0500
New Thread Freeze Spray Trouble Shooting
Re: Freeze Spray Trouble Shooting
Bev Christian
Fri, 26 Apr 2002 12:21:33 -0400
Re: Freeze Spray Trouble Shooting
David Douthit
Fri, 26 Apr 2002 09:27:30 -0700
Re: Freeze Spray Trouble Shooting
Carl VanWormer
Fri, 26 Apr 2002 07:46:45 -0700
Re: Freeze Spray Trouble Shooting
Brian Ellis
Fri, 26 Apr 2002 12:51:35 +0300
Re: Freeze Spray Trouble Shooting
Bev Christian
Thu, 25 Apr 2002 11:31:34 -0400
Re: Freeze Spray Trouble Shooting
Brian Ellis
Thu, 25 Apr 2002 18:28:13 +0300
Re: Freeze Spray Trouble Shooting
Paul Signorelli
Thu, 25 Apr 2002 10:08:04 -0500
Re: Freeze Spray Trouble Shooting
<>
Thu, 25 Apr 2002 16:01:45 +0200
Re: Freeze Spray Trouble Shooting
<>
Wed, 24 Apr 2002 20:44:40 EDT
Re: Freeze Spray Trouble Shooting
David Douthit
Wed, 24 Apr 2002 17:02:59 -0700
Re: Freeze Spray Trouble Shooting
Bev Christian
Wed, 24 Apr 2002 17:30:34 -0400
Re: Freeze Spray Trouble Shooting
Carl VanWormer
Wed, 24 Apr 2002 07:22:32 -0700
Re: Freeze Spray Trouble Shooting
Eric Christison
Wed, 24 Apr 2002 14:54:47 +0100
Re: Freeze Spray Trouble Shooting
<>
Wed, 24 Apr 2002 15:58:36 +0200
Re: Freeze Spray Trouble Shooting
Rob Legg
Wed, 24 Apr 2002 08:16:20 -0400
Freeze Spray Trouble Shooting
Ken Carlile
Tue, 23 Apr 2002 23:11:38 -0500
New Thread Gold Plating
Re: Gold Plating
Earl Moon
Fri, 5 Apr 2002 11:43:56 -0600
Re: Gold Plating
Misner, Bruce
Fri, 5 Apr 2002 09:32:18 -0700
Re: Gold Plating
George Milad
Fri, 5 Apr 2002 09:27:44 EST
Gold Plating
Mark Rusciolelli
Fri, 5 Apr 2002 08:23:45 -0500
New Thread Gold Plating Electroless vs. Immersion
Re: Gold Plating Electroless vs. Immersion
Rudy Sedlak
Fri, 5 Apr 2002 09:16:16 EST
Re: Gold Plating Electroless vs. Immersion
Rudy Sedlak
Fri, 5 Apr 2002 09:16:16 EST
New Thread Got my boards and lost my house
Re: Got my boards and lost my house
Dieselberg, Ron
Mon, 8 Apr 2002 10:54:04 -0400
Re: Got my boards and lost my house
Brian Ellis
Mon, 8 Apr 2002 16:13:09 +0300
Re: Got my boards and lost my house
Sasha Miladinovic
Mon, 8 Apr 2002 14:17:58 +0200
Got my boards and lost my house
Earl Moon
Mon, 8 Apr 2002 05:55:21 -0500
New Thread Hand cleaners
Re: Hand cleaners
Munie, Gregory
Fri, 12 Apr 2002 09:30:14 -0500
Re: Hand cleaners
Mike Fenner
Fri, 12 Apr 2002 09:02:31 +0100
Re: Hand cleaners
<>
Fri, 12 Apr 2002 07:49:02 +0800
Re: Hand cleaners
Charles Caswell
Thu, 11 Apr 2002 14:54:21 -0500
Re: Hand cleaners
Brian Ellis
Thu, 11 Apr 2002 17:34:22 +0300
Re: Hand cleaners
<>
Thu, 11 Apr 2002 10:22:44 EDT
Re: Hand cleaners
Randy Bock Sr.
Thu, 11 Apr 2002 10:19:49 -0400
Hand cleaners
Jim Jenkins
Thu, 11 Apr 2002 07:52:09 -0500
New Thread Hand cleaners, Orange Oil based
Re: Hand cleaners, Orange Oil based
Randy Bock Sr.
Thu, 11 Apr 2002 11:40:21 -0400
Re: Hand cleaners, Orange Oil based
Rudy Sedlak
Thu, 11 Apr 2002 10:45:40 EDT
New Thread HDIC
Re: HDIC
Dieselberg, Ron
Mon, 29 Apr 2002 08:00:36 -0400
Re: HDIC
<>
Sat, 27 Apr 2002 13:42:39 EDT
HDIC
Rick Fudalewski
Sat, 27 Apr 2002 13:05:53 EDT
New Thread Heatsink attachment prior to reflow soldering
Heatsink attachment prior to reflow soldering
Brent Sayer
Tue, 2 Apr 2002 13:29:21 -0600
New Thread Hole cracking of Teflon PCB after screwing
Re: Hole cracking of Teflon PCB after screwing
Misner, Bruce
Fri, 19 Apr 2002 08:11:19 -0500
Re: Hole cracking of Teflon PCB after screwing
<>
Thu, 18 Apr 2002 16:32:33 -0500
Hole cracking of Teflon PCB after screwing
Shirley Xiao
Thu, 18 Apr 2002 03:00:47 -0700
New Thread Humorous Stories
Re: Humorous Stories
Jack C. Olson
Fri, 12 Apr 2002 09:53:27 -0500
Humorous Stories
Glenn Wells
Thu, 11 Apr 2002 10:42:45 -0500
New Thread Immersion Gold Vs Immersion Tin for 0201 landpatterns
Re: Immersion Gold Vs Immersion Tin for 0201 landpatterns
Tuan Bui
Fri, 26 Apr 2002 16:19:51 -0700
Re: Immersion Gold Vs Immersion Tin for 0201 landpatterns
David Fish
Fri, 26 Apr 2002 18:18:06 -0700
Re: Immersion Gold Vs Immersion Tin for 0201 landpatterns
Tuan Bui
Fri, 26 Apr 2002 11:05:08 -0700
Re: Immersion Gold Vs Immersion Tin for 0201 landpatterns
George Milad
Fri, 26 Apr 2002 11:47:24 EDT
Immersion Gold Vs Immersion Tin for 0201 landpatterns
Tuan Bui
Thu, 25 Apr 2002 12:07:27 -0500
New Thread Immersion Silver
Re: Immersion Silver
Jack C. Olson
Fri, 19 Apr 2002 10:27:45 -0500
Re: Immersion Silver
Wenger, George M.
Fri, 19 Apr 2002 09:53:38 -0400
Re: Immersion Silver
McMullen, Kerry
Fri, 19 Apr 2002 09:08:11 -0400
Re: Immersion Silver
Earl Moon
Fri, 19 Apr 2002 06:49:36 -0400
Re: Immersion Silver
Wenger, George M.
Thu, 18 Apr 2002 21:30:55 -0400
Re: Immersion Silver
Rick Fudalewski
Thu, 18 Apr 2002 20:04:42 EDT
Re: Immersion Silver
Earl Moon
Thu, 18 Apr 2002 15:21:15 -0500
Re: Immersion Silver
McMullen, Kerry
Thu, 18 Apr 2002 15:56:35 -0400
Re: Immersion Silver
Earl Moon
Thu, 18 Apr 2002 13:58:45 -0500
Re: Immersion Silver
McMullen, Kerry
Thu, 18 Apr 2002 13:29:13 -0400
Re: Immersion Silver
Wenger, George M.
Thu, 18 Apr 2002 12:11:27 -0400
Re: Immersion Silver
Dave Hillman
Thu, 18 Apr 2002 08:37:52 -0500
Re: Immersion Silver
Earl Moon
Thu, 18 Apr 2002 07:59:23 -0500
Re: Immersion Silver
Earl Moon
Thu, 18 Apr 2002 07:54:01 -0500
Re: Immersion Silver
McMullen, Kerry
Thu, 18 Apr 2002 08:41:04 -0400
Re: Immersion Silver
Rick Fudalewski
Thu, 18 Apr 2002 08:42:17 EDT
Re: Immersion Silver
Eric Dawson
Thu, 18 Apr 2002 13:40:20 +0100
Re: Immersion Silver
Furrow, Robert Gordon (Bob)
Thu, 18 Apr 2002 08:29:08 -0400
Re: Immersion Silver
Earl Moon
Thu, 18 Apr 2002 07:00:48 -0500
Re: Immersion Silver
Dougal Stewart
Thu, 18 Apr 2002 10:56:52 +0100
Re: Immersion Silver
Earl Moon
Wed, 17 Apr 2002 15:42:42 -0500
Re: Immersion Silver
Gerard O'Brien
Wed, 17 Apr 2002 16:27:07 -0400
Re: Immersion Silver
Bev Christian
Wed, 17 Apr 2002 15:23:18 -0400
Re: Immersion Silver
<>
Wed, 17 Apr 2002 14:08:55 -0500
Re: Immersion Silver
Rob Legg
Wed, 17 Apr 2002 14:54:50 -0400
Re: Immersion Silver
Guy Ramsey
Wed, 17 Apr 2002 13:05:32 -0400
Re: Immersion Silver
Wenger, George M.
Wed, 17 Apr 2002 13:00:53 -0400
Re: Immersion Silver
Earl Moon
Wed, 17 Apr 2002 11:17:01 -0500
Re: Immersion Silver
Jack C. Olson
Wed, 17 Apr 2002 10:22:24 -0500
Re: Immersion Silver
WEEKES, MICHAEL HS-SNS
Wed, 17 Apr 2002 10:16:49 -0400
Re: Immersion Silver
Jack C. Olson
Wed, 17 Apr 2002 07:38:43 -0500
New Thread Immersion vs. Electroless Understandings
Immersion vs. Electroless Understandings
Rudy Sedlak
Tue, 9 Apr 2002 20:01:15 EDT
New Thread Indium Solder
Re: Indium Solder
Lou Hart
Mon, 1 Apr 2002 21:59:44 -0500
Indium Solder
Valquirio N. Carvalho
Mon, 1 Apr 2002 20:41:40 -0500
New Thread Insulation in the crimp contact area
Re: Insulation in the crimp contact area
Strickland, Mark
Fri, 26 Apr 2002 06:57:05 -0500
Re: Insulation in the crimp contact area
Kathy Kuhlow
Wed, 24 Apr 2002 15:09:25 -0500
Re: Insulation in the crimp contact area
Sauer, Steven T.
Wed, 24 Apr 2002 14:44:45 -0400
Re: Insulation in the crimp contact area
Guy Ramsey
Wed, 24 Apr 2002 14:15:48 -0400
Re: Insulation in the crimp contact area
Phil Nutting
Wed, 24 Apr 2002 14:04:37 -0400
Re: Insulation in the crimp contact area
<>
Wed, 24 Apr 2002 11:04:42 -0600
Insulation in the crimp contact area
Forselles, Tom
Wed, 24 Apr 2002 09:26:49 -0700
New Thread Interesting question
Re: Interesting question
Brian Ellis
Sat, 13 Apr 2002 09:05:34 +0300
Re: Interesting question
Rob Legg
Fri, 12 Apr 2002 16:46:14 -0400
Re: Interesting question
Lou Hart
Fri, 12 Apr 2002 16:34:20 -0400
Re: Interesting question
Genny Gibbard
Fri, 12 Apr 2002 13:31:51 -0600
Re: Interesting question
Werner Engelmaier
Fri, 12 Apr 2002 15:18:40 EDT
Re: Interesting question
Michael Khusid
Fri, 12 Apr 2002 14:32:33 -0400
Re: Interesting question
Joseph Spicuzza
Fri, 12 Apr 2002 13:49:13 -0400
Re: Interesting question
Valerie St. Cyr - Sun USOPS New Products
Fri, 12 Apr 2002 13:30:15 -0400
Re: Interesting question
Phil Nutting
Fri, 12 Apr 2002 12:31:29 -0400
Interesting question
Don Vischulis
Fri, 12 Apr 2002 10:48:32 -0500
New Thread Ionic Contamination for No Clean Flux
Re: Ionic Contamination for No Clean Flux
Brian Ellis
Wed, 17 Apr 2002 09:55:56 +0300
Ionic Contamination for No Clean Flux
YH Koh
Wed, 17 Apr 2002 00:08:25 -0500
New Thread IPC DESIGNERS LEARNING SYMPOSIUMS - TEXAS & CANADA
IPC DESIGNERS LEARNING SYMPOSIUMS - TEXAS & CANADA
Stephannie Caliendo
Wed, 17 Apr 2002 13:11:43 -0500
New Thread IPC SMT FOOTPRINT DESIGN GUIDELINES VS SUPPLIERS
Re: IPC SMT FOOTPRINT DESIGN GUIDELINES VS SUPPLIERS
Earl Moon
Mon, 15 Apr 2002 07:48:43 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDELINES VS SUPPLIERS
Maddox, Allen T
Mon, 15 Apr 2002 08:05:55 -0400
New Thread IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Gary Ferrari
Mon, 22 Apr 2002 10:30:27 EDT
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Greg Scott
Fri, 19 Apr 2002 09:16:44 -0700
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Randy Bock Sr.
Fri, 19 Apr 2002 07:53:21 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Rob Legg
Thu, 18 Apr 2002 22:19:56 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Gary Ferrari
Thu, 18 Apr 2002 19:15:08 EDT
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Thu, 18 Apr 2002 08:11:54 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Ted Tontis, C.I.D.
Thu, 18 Apr 2002 08:12:34 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Wed, 17 Apr 2002 15:46:20 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
David Ricketts
Wed, 17 Apr 2002 12:27:44 -0700
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Wed, 17 Apr 2002 10:32:11 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Wed, 17 Apr 2002 10:25:44 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Dan R. Johnson
Wed, 17 Apr 2002 08:22:27 -0700
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Frank Kimmey
Wed, 17 Apr 2002 07:48:51 -0700
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Jack C. Olson
Wed, 17 Apr 2002 07:27:23 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Rob Legg
Wed, 17 Apr 2002 07:56:08 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Wed, 17 Apr 2002 01:03:54 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Wed, 17 Apr 2002 00:57:58 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Werner Engelmaier
Tue, 16 Apr 2002 23:27:23 EDT
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
<>
Wed, 17 Apr 2002 09:02:51 +0800
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
<>
Wed, 17 Apr 2002 07:53:33 +0800
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Rob Legg
Tue, 16 Apr 2002 16:39:23 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Tue, 16 Apr 2002 11:37:33 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Tue, 16 Apr 2002 11:35:58 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Ken Carlile
Tue, 16 Apr 2002 10:59:14 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Kathy Kuhlow
Tue, 16 Apr 2002 10:54:17 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Tue, 16 Apr 2002 09:53:52 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Jack C. Olson
Tue, 16 Apr 2002 09:53:00 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Tue, 16 Apr 2002 08:32:44 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Tue, 16 Apr 2002 08:30:27 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Werner Engelmaier
Tue, 16 Apr 2002 09:07:02 EDT
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
McMullen, Kerry
Tue, 16 Apr 2002 08:44:18 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Mon, 15 Apr 2002 19:12:24 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Werner Engelmaier
Mon, 15 Apr 2002 18:16:40 EDT
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Werner Engelmaier
Mon, 15 Apr 2002 18:16:41 EDT
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Mon, 15 Apr 2002 16:57:51 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Rob Legg
Mon, 15 Apr 2002 17:16:03 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Mon, 15 Apr 2002 14:50:22 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Guy Ramsey
Mon, 15 Apr 2002 14:31:20 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Mon, 15 Apr 2002 11:29:02 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Jeff Seeger
Mon, 15 Apr 2002 10:31:00 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Guy Ramsey
Mon, 15 Apr 2002 08:04:12 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Mon, 15 Apr 2002 05:19:54 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Busko, Wolfgang
Mon, 15 Apr 2002 10:44:14 +0200
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Rob Legg
Sun, 14 Apr 2002 18:52:00 -0400
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Matthias Mansfeld
Sun, 14 Apr 2002 22:15:45 +0200
IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS
Earl Moon
Sun, 14 Apr 2002 13:02:31 -0500
New Thread IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS - and for custom components?
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES VS SUPPLIERS - and for custom components?
phil bavaro
Tue, 23 Apr 2002 09:25:57 -0700
New Thread IPC SMT FOOTPRINT DESIGN GUIDLINES/ Philips Guidelines
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES/ Philips Guidelines
Earl Moon
Tue, 16 Apr 2002 12:26:01 -0500
Re: IPC SMT FOOTPRINT DESIGN GUIDLINES/ Philips Guidelines
Frank Langlois
Tue, 16 Apr 2002 09:55:24 -0700
New Thread IPC-4101 - ARLON 25N
IPC-4101 - ARLON 25N
McGlaughlin, Jeffrey A
Fri, 5 Apr 2002 12:45:08 -0500
New Thread IPC-A-610 has been DoD Adopted !
Re: IPC-A-610 has been DoD Adopted !
Hinners Hans M Civ WRALC/LUGE
Tue, 23 Apr 2002 15:48:09 +0100
IPC-A-610 has been DoD Adopted !
Jack Crawford
Sat, 13 Apr 2002 16:30:25 -0500
New Thread Labor Price difference for 1-up v/s 4-up
Re: Labor Price difference for 1-up v/s 4-up
Alan Groves
Sat, 20 Apr 2002 01:04:23 +0100
Re: Labor Price difference for 1-up v/s 4-up
Scott Kauling
Fri, 19 Apr 2002 16:22:48 -0500
Re: Labor Price difference for 1-up v/s 4-up
Scott Kauling
Fri, 19 Apr 2002 16:13:53 -0500
Labor Price difference for 1-up v/s 4-up
Ken Patel
Fri, 19 Apr 2002 11:50:23 -0700
New Thread LARGE PWB
Re: LARGE PWB
tony steinke
Wed, 10 Apr 2002 14:15:31 -0700
LARGE PWB
Marsico, James
Wed, 10 Apr 2002 14:00:56 -0400
New Thread lighting and J STD 001
Re: lighting and J STD 001
Sauer, Steven T.
Mon, 22 Apr 2002 16:32:08 -0400
lighting and J STD 001
WEEKES, MICHAEL HS-SNS
Mon, 22 Apr 2002 13:08:22 -0400
New Thread Listserv etiquette
Listserv etiquette
Keach Sasamori
Wed, 10 Apr 2002 13:02:23 -0500
New Thread Looking for Dwayne Kincade
Looking for Dwayne Kincade
David Hoover
Tue, 23 Apr 2002 07:03:49 -0700
New Thread Looking for Happy Holden
Re: Looking for Happy Holden
fullname
Tue, 30 Apr 2002 08:00:32 +0800
Re: Looking for Happy Holden
fullname
Tue, 30 Apr 2002 07:58:35 +0800
Re: Looking for Happy Holden
Sauer, Steven T.
Mon, 29 Apr 2002 09:35:54 -0400
Re: Looking for Happy Holden
Sherif Refaat
Mon, 29 Apr 2002 08:35:58 -0400
Re: Looking for Happy Holden
chris johnston
Sun, 1 Apr 2001 03:37:24 +1000
Re: Looking for Happy Holden
Earl Moon
Mon, 29 Apr 2002 06:06:08 -0400
Looking for Happy Holden
fullname
Mon, 29 Apr 2002 12:14:43 +0800
New Thread Looking for laser drill service company.
Re: Looking for laser drill service company.
Jim Keating
Thu, 25 Apr 2002 21:48:26 -0400
Looking for laser drill service company.
peter blokhuis
Thu, 25 Apr 2002 06:32:03 -0700
New Thread Looking for used oven in Canada
Looking for used oven in Canada
<>
Tue, 23 Apr 2002 17:48:49 -0400
New Thread Manual printing tables...
Re: Manual printing tables...
Guy Ramsey
Wed, 24 Apr 2002 15:15:28 -0400
Re: Manual printing tables...
Sauer, Steven T.
Wed, 24 Apr 2002 13:31:20 -0400
Re: Manual printing tables...
Dan R. Johnson
Wed, 24 Apr 2002 10:15:52 -0700
Manual printing tables...
<>
Wed, 24 Apr 2002 11:25:44 EDT
New Thread Measuring "No Clean" process quality
Re: Measuring "No Clean" process quality
Volkmar Huss
Wed, 10 Apr 2002 10:29:37 +0200
New Thread Mechanical Strength of Solder Joints
Mechanical Strength of Solder Joints
Praveen Kumar
Mon, 29 Apr 2002 19:53:45 -0500
New Thread Microscopes
Re: Microscopes
Brian Ellis
Fri, 26 Apr 2002 12:57:43 +0300
Re: Microscopes
Torres, Roberto
Thu, 25 Apr 2002 12:53:46 -0400
Re: Microscopes
Brian Ellis
Thu, 25 Apr 2002 09:11:40 +0300
Re: Microscopes
Torres, Roberto
Wed, 24 Apr 2002 12:38:29 -0400
Re: Microscopes
Charles Caswell
Wed, 24 Apr 2002 09:31:51 -0500
Re: Microscopes
Kathy Kuhlow
Wed, 24 Apr 2002 08:29:01 -0500
Re: Microscopes
Liviu Jurjica
Tue, 23 Apr 2002 23:34:42 -0400
Re: Microscopes
Torres, Roberto
Tue, 23 Apr 2002 19:39:35 -0400
Re: Microscopes
Lothar Thole
Wed, 24 Apr 2002 08:37:03 +0930
Re: Microscopes
<>
Tue, 23 Apr 2002 17:48:23 EDT
Microscopes
Torres, Roberto
Tue, 23 Apr 2002 17:20:52 -0400
New Thread Microvias and rigid-flex in one board shop?
Re: Microvias and rigid-flex in one board shop?
Earl Moon
Sat, 27 Apr 2002 12:02:03 -0500
Re: Microvias and rigid-flex in one board shop?
<>
Sat, 27 Apr 2002 12:57:31 EDT
Re: Microvias and rigid-flex in one board shop?
<>
Sat, 27 Apr 2002 12:42:24 EDT
Re: Microvias and rigid-flex in one board shop?
Sean Hill
Fri, 26 Apr 2002 14:13:48 -0700
Re: Microvias and rigid-flex in one board shop?
Earl Moon
Fri, 26 Apr 2002 15:37:13 -0500
Re: Microvias and rigid-flex in one board shop?
Crepeau, Phil
Fri, 26 Apr 2002 13:27:44 -0700
Re: Microvias and rigid-flex in one board shop?
Earl Moon
Fri, 26 Apr 2002 14:51:28 -0500
Re: Microvias and rigid-flex in one board shop?
Joseph Spicuzza
Fri, 26 Apr 2002 13:25:40 -0400
Microvias and rigid-flex in one board shop?
Houston, Terri
Fri, 26 Apr 2002 11:36:06 -0500
New Thread MIL Standard
Re: MIL Standard
Jeffrey Ciesla
Wed, 10 Apr 2002 14:53:42 -0500
Re: MIL Standard
Bill Christoffel
Wed, 3 Apr 2002 09:33:41 -0600
Re: MIL Standard
Wright, Michael D.
Wed, 3 Apr 2002 09:48:46 -0500
Re: MIL Standard
Sauer, Steven T.
Wed, 3 Apr 2002 09:34:49 -0500
Re: MIL Standard
Mel Parrish
Tue, 2 Apr 2002 13:55:37 -0600
Re: MIL Standard
Pete Phillips
Tue, 2 Apr 2002 09:48:03 -0700
MIL Standard
Linda Langley
Tue, 2 Apr 2002 10:22:03 -0500
New Thread MIL-C-28809 Replacement/supersede
Re: MIL-C-28809 Replacement/supersede
Sauer, Steven T.
Mon, 1 Apr 2002 07:48:37 -0500
New Thread Military Designs
Re: Military Designs
FOX, Ian (York Rd)
Tue, 9 Apr 2002 13:53:18 +0100
Re: Military Designs
Crepeau, Phil
Mon, 8 Apr 2002 08:09:06 -0700
Military Designs
Marsico, James
Mon, 8 Apr 2002 10:42:49 -0400
New Thread naive questions
Re: naive questions
Don Vischulis
Wed, 17 Apr 2002 11:55:35 -0500
Re: naive questions
Earl Moon
Wed, 17 Apr 2002 11:03:09 -0500
naive questions
Dan R. Johnson
Wed, 17 Apr 2002 08:59:29 -0700
New Thread New Kid on the block
Re: New Kid on the block
Bill Raymond
Tue, 2 Apr 2002 14:46:39 -0500
Re: New Kid on the block
Earl Moon
Tue, 2 Apr 2002 13:38:39 -0600
New Kid on the block
joseph & karen lovvorn
Tue, 2 Apr 2002 14:24:33 -0500
New Thread Nickel Test
Re: Nickel Test
Munie, Gregory
Tue, 16 Apr 2002 10:01:15 -0500
Re: Nickel Test
Geoff Layhe
Tue, 16 Apr 2002 14:05:29 +0100
Re: Nickel Test
Barmuta, Mike
Thu, 11 Apr 2002 09:02:09 -0700
Re: Nickel Test
Goldman, Patricia J.
Thu, 11 Apr 2002 11:53:03 -0400
Re: Nickel Test
Crepeau, Phil
Thu, 11 Apr 2002 07:48:22 -0700
Nickel Test
Rudy Sedlak
Wed, 10 Apr 2002 21:24:35 EDT
New Thread NTC Gold Plating Electroless vs. Immersion
Re: NTC Gold Plating Electroless vs. Immersion
Chris Christian
Tue, 9 Apr 2002 16:49:13 -0400
Re: NTC Gold Plating Electroless vs. Immersion
Kasprzak, Bill (sys) USX
Tue, 9 Apr 2002 15:48:53 -0400
Re: NTC Gold Plating Electroless vs. Immersion
Dan R. Johnson
Mon, 8 Apr 2002 11:52:52 -0700
Re: NTC Gold Plating Electroless vs. Immersion
Werner Engelmaier
Mon, 8 Apr 2002 12:58:43 EDT
Re: NTC Gold Plating Electroless vs. Immersion
Mike Fenner
Mon, 8 Apr 2002 17:29:32 +0100
Re: NTC Gold Plating Electroless vs. Immersion
Earl Moon
Mon, 8 Apr 2002 05:29:47 -0500
Re: NTC Gold Plating Electroless vs. Immersion
<>
Mon, 8 Apr 2002 15:08:36 +0800
Re: NTC Gold Plating Electroless vs. Immersion
Sauer, Steven T.
Fri, 5 Apr 2002 11:26:44 -0500
New Thread Off Topic - The Married Spud & other burning questions
Re: Off Topic - The Married Spud & other burning questions
Vanderhoof, Brad
Wed, 17 Apr 2002 17:14:52 -0700
Re: Off Topic - The Married Spud & other burning questions
Bloomquist, Ken
Mon, 15 Apr 2002 12:33:18 -0700
Re: Off Topic - The Married Spud & other burning questions
Dieselberg, Ron
Mon, 15 Apr 2002 08:05:17 -0400
Re: Off Topic - The Married Spud & other burning questions
Hinners Hans M Civ WRALC/LUGE
Sat, 13 Apr 2002 15:36:00 +0100
Re: Off Topic - The Married Spud & other burning questions
<>
Fri, 12 Apr 2002 21:44:14 EDT
Re: Off Topic - The Married Spud & other burning questions
JaMi Smith
Fri, 12 Apr 2002 14:10:17 -0700
Re: Off Topic - The Married Spud & other burning questions
Phil Nutting
Fri, 12 Apr 2002 15:22:13 -0400
Re: Off Topic - The Married Spud & other burning questions
Hinners Hans M Civ WRALC/LUGE
Fri, 12 Apr 2002 19:46:32 +0100
Re: Off Topic - The Married Spud & other burning questions
<>
Fri, 12 Apr 2002 13:29:54 EDT
Re: Off Topic - The Married Spud & other burning questions
Keel, Mike
Thu, 11 Apr 2002 16:49:26 -0700
Off Topic - The Married Spud & other burning questions
Hinners Hans M Civ WRALC/LUGE
Thu, 11 Apr 2002 16:56:04 -0400
New Thread off topic- married spud & hand cleaner
off topic- married spud & hand cleaner
<>
Fri, 12 Apr 2002 06:51:07 -0700
New Thread OSP
Re: OSP
Earl Moon
Sat, 20 Apr 2002 09:04:30 -0500
Re: OSP
Glynn Shaw
Sat, 20 Apr 2002 07:04:23 -0700
Re: OSP
Louis, Edwin @ CSE
Fri, 19 Apr 2002 13:19:21 -0400
Re: OSP
WEEKES, MICHAEL HS-SNS
Fri, 19 Apr 2002 09:47:47 -0400
Re: OSP
Earl Moon
Fri, 19 Apr 2002 08:01:02 -0500
Re: OSP
Charlie McMahon
Fri, 19 Apr 2002 08:17:23 -0400
Re: OSP
Randy Bock Sr.
Fri, 19 Apr 2002 07:52:10 -0400
Re: OSP
Earl Moon
Fri, 19 Apr 2002 06:06:02 -0500
Re: OSP
Wenger, George M.
Thu, 18 Apr 2002 21:53:03 -0400
Re: OSP
Earl Moon
Thu, 18 Apr 2002 15:57:15 -0500
Re: OSP
Jana Carraway
Thu, 18 Apr 2002 14:07:20 -0700
Re: OSP
Barmuta, Mike
Thu, 18 Apr 2002 13:51:14 -0700
Re: OSP
Earl Moon
Thu, 18 Apr 2002 15:40:19 -0500
Re: OSP
Guy Ramsey
Thu, 18 Apr 2002 16:31:19 -0400
Re: OSP
Don Vischulis
Thu, 18 Apr 2002 14:34:32 -0500
Re: OSP
Earl Moon
Thu, 18 Apr 2002 14:14:43 -0500
Re: OSP
Earl Moon
Thu, 18 Apr 2002 14:02:29 -0500
Re: OSP
Rick Fudalewski
Thu, 18 Apr 2002 14:48:46 EDT
Re: OSP
Jana Carraway
Thu, 18 Apr 2002 10:58:28 -0700
Re: OSP
Earl Moon
Thu, 18 Apr 2002 11:41:55 -0500
Re: OSP
Jana Carraway
Thu, 18 Apr 2002 09:31:57 -0700
OSP
Barry Gallegos
Thu, 18 Apr 2002 08:38:33 -0600
New Thread OSP Re: [TN] Immersion Silver
Re: OSP Re: [TN] Immersion Silver
Dave Hillman
Fri, 19 Apr 2002 09:02:35 -0500
Re: OSP Re: [TN] Immersion Silver
Earl Moon
Fri, 19 Apr 2002 06:10:14 -0500
Re: OSP Re: [TN] Immersion Silver
Dougal Stewart
Fri, 19 Apr 2002 10:14:18 +0100
New Thread PCB Drill press
Re: PCB Drill press
Jeff Ferry
Wed, 24 Apr 2002 08:35:44 -0400
Re: PCB Drill press
<>
Wed, 24 Apr 2002 20:03:59 +0800
PCB Drill press
Peter Lee
Tue, 23 Apr 2002 22:57:36 -0700
New Thread pedantry
Re: pedantry
<>
Wed, 17 Apr 2002 17:43:21 +0800
New Thread Peelable Soldermask
Re: Peelable Soldermask
Barmuta, Mike
Fri, 19 Apr 2002 14:47:35 -0700
Peelable Soldermask
Brian L. Guidi
Fri, 19 Apr 2002 15:45:05 -0400
New Thread Philips Signetics SCC 68692 Dual UART
Re: Philips Signetics SCC 68692 Dual UART
Seth Goodman
Fri, 26 Apr 2002 16:51:16 -0500
Philips Signetics SCC 68692 Dual UART
Dennis Petrosky
Thu, 25 Apr 2002 10:53:54 -0400
New Thread Pot washers!
Re: Pot washers!
<>
Thu, 11 Apr 2002 16:41:23 EDT
Re: Pot washers!
<>
Thu, 11 Apr 2002 10:42:42 +0800
Re: Pot washers!
John Boocock
Wed, 10 Apr 2002 13:55:15 +0100
Pot washers!
<>
Wed, 10 Apr 2002 07:36:28 +0100
New Thread Powered up burn- in test
Re: Powered up burn- in test
Werner Engelmaier
Tue, 9 Apr 2002 12:49:51 EDT
Re: Powered up burn- in test
Don Vischulis
Tue, 9 Apr 2002 07:31:07 -0500
Re: Powered up burn- in test
Richard van Beveren
Tue, 9 Apr 2002 11:47:06 +1000
Powered up burn- in test
Landes, Jeff
Mon, 8 Apr 2002 16:46:17 -0400
New Thread PREPREG
Re: PREPREG
Earl Moon
Wed, 24 Apr 2002 07:03:15 -0500
Re: PREPREG
Geoff Layhe
Wed, 24 Apr 2002 09:58:56 +0100
Re: PREPREG
<>
Tue, 23 Apr 2002 17:25:17 -0700
Re: PREPREG
tony steinke
Tue, 23 Apr 2002 17:07:36 -0700
PREPREG
Marsico, James
Tue, 23 Apr 2002 16:05:39 -0400
New Thread Problem with the List Server ? ? ?
Problem with the List Server ? ? ?
JaMi Smith
Wed, 3 Apr 2002 10:21:12 -0800
New Thread Proposed lifting of component date code restrictions
Re: Proposed lifting of component date code restrictions
David Douthit
Tue, 30 Apr 2002 17:10:13 -0700
Re: Proposed lifting of component date code restrictions
David Douthit
Tue, 30 Apr 2002 17:02:00 -0700
Re: Proposed lifting of component date code restrictions
Earl Moon
Tue, 30 Apr 2002 15:43:35 -0400
Re: Proposed lifting of component date code restrictions
Gaby Bogdan
Tue, 30 Apr 2002 21:55:25 +0200
Proposed lifting of component date code restrictions
Richard Carruth
Tue, 30 Apr 2002 13:29:43 -0500
Re: Proposed lifting of component date code restrictions
James TerVeen
Tue, 30 Apr 2002 14:16:43 -0400
Re: Proposed lifting of component date code restrictions
Earl Moon
Tue, 30 Apr 2002 14:04:13 -0400
Re: Proposed lifting of component date code restrictions
Guy Ramsey
Tue, 30 Apr 2002 13:11:54 -0400
Re: Proposed lifting of component date code restrictions
Dave Hillman
Tue, 30 Apr 2002 11:46:49 -0500
Re: Proposed lifting of component date code restrictions
Kari Rambo
Tue, 30 Apr 2002 11:27:07 -0500
Re: Proposed lifting of component date code restrictions
Mel Parrish
Tue, 30 Apr 2002 11:03:44 -0500
Re: Proposed lifting of component date code restrictions
bbarr
Tue, 30 Apr 2002 11:42:03 -0400
Re: Proposed lifting of component date code restrictions
Crepeau, Phil
Tue, 30 Apr 2002 07:34:32 -0700
Re: Proposed lifting of component date code restrictions
Kathy Kuhlow
Tue, 30 Apr 2002 08:45:18 -0500
Re: Proposed lifting of component date code restrictions
Bloomquist, Ken
Tue, 30 Apr 2002 06:13:17 -0700
Re: Proposed lifting of component date code restrictions
Earl Moon
Tue, 30 Apr 2002 05:57:17 -0500
Re: Proposed lifting of component date code restrictions
Earl Moon
Tue, 30 Apr 2002 06:44:01 -0400
Re: Proposed lifting of component date code restrictions
<>
Tue, 30 Apr 2002 17:26:35 +0800
Re: Proposed lifting of component date code restrictions
Brian Ellis
Tue, 30 Apr 2002 11:02:03 +0300
Re: Proposed lifting of component date code restrictions
fullname
Tue, 30 Apr 2002 13:57:37 +0800
Re: Proposed lifting of component date code restrictions
David Douthit
Mon, 29 Apr 2002 17:32:34 -0700
Re: Proposed lifting of component date code restrictions
<>
Mon, 29 Apr 2002 19:05:47 EDT
Proposed lifting of component date code restrictions
Jack Crawford
Mon, 29 Apr 2002 15:54:23 -0500
New Thread PWB Fab Resource
PWB Fab Resource
Mel Parrish
Tue, 30 Apr 2002 13:09:00 -0500
New Thread question - 2 parts
question - 2 parts
WEEKES, MICHAEL HS-SNS
Tue, 16 Apr 2002 12:20:37 -0400
New Thread Question on Rework
Re: Question on Rework
Miguel Vallejo
Tue, 9 Apr 2002 08:35:23 -0700
Question on Rework
Frank Davies
Tue, 9 Apr 2002 11:34:08 +0100
New Thread Redesign Via in Pad
Re: Redesign Via in Pad
Mickey Weiner
Thu, 18 Apr 2002 02:02:51 -0500
Redesign Via in Pad
Zweigart, Siegmund
Mon, 15 Apr 2002 18:08:35 +0200
New Thread Removal of Cured Nomenclature Ink
Re: Removal of Cured Nomenclature Ink
Jim Keating
Mon, 29 Apr 2002 15:41:13 -0400
Re: Removal of Cured Nomenclature Ink
Mcmaster, Michael
Fri, 26 Apr 2002 08:58:34 -0700
Re: Removal of Cured Nomenclature Ink
tony steinke
Mon, 22 Apr 2002 16:18:48 -0700
Removal of Cured Nomenclature Ink
Furrow, Robert Gordon (Bob)
Mon, 22 Apr 2002 15:44:41 -0400
New Thread Repair of Circuit with Solder Paste below
Re: Repair of Circuit with Solder Paste below
Debbie Goodwin
Thu, 25 Apr 2002 07:21:25 -0700
Re: Repair of Circuit with Solder Paste below
Becerra Alejandro
Thu, 25 Apr 2002 09:20:01 -0500
Re: Repair of Circuit with Solder Paste below
Steve Owen
Thu, 25 Apr 2002 15:20:46 +0100
Re: Repair of Circuit with Solder Paste below
Edward S. Wheeler
Thu, 25 Apr 2002 09:44:50 -0400
Re: Repair of Circuit with Solder Paste below
Becerra Alejandro
Thu, 25 Apr 2002 08:11:13 -0500
Re: Repair of Circuit with Solder Paste below
Marsico, James
Thu, 25 Apr 2002 08:09:33 -0400
Repair of Circuit with Solder Paste below
Becerra Alejandro
Wed, 24 Apr 2002 15:53:57 -0500
New Thread Sealant Recommendations?
Re: Sealant Recommendations?
Tostevin, Bruce
Tue, 16 Apr 2002 06:58:18 -0500
Re: Sealant Recommendations?
David Douthit
Mon, 15 Apr 2002 13:09:25 -0700
Re: Sealant Recommendations?
Phil Bavaro
Mon, 15 Apr 2002 10:35:01 -0700
Re: Sealant Recommendations?
David Douthit
Mon, 15 Apr 2002 09:55:32 -0700
Sealant Recommendations?
phil bavaro
Mon, 15 Apr 2002 08:22:46 -0700
New Thread Secondary reflow over wave...
Re: Secondary reflow over wave...
Wenger, George M.
Tue, 23 Apr 2002 12:48:13 -0400
Re: Secondary reflow over wave...
Cyker, Howard A (Howie)
Tue, 23 Apr 2002 11:09:26 -0400
Re: Secondary reflow over wave...
Jorge Santana
Tue, 23 Apr 2002 09:35:11 -0500
Re: Secondary reflow over wave...
Guy Ramsey
Tue, 23 Apr 2002 09:18:12 -0400
Re: Secondary reflow over wave...
Bev Christian
Tue, 23 Apr 2002 07:54:48 -0400
Re: Secondary reflow over wave...
Eric Dawson
Tue, 23 Apr 2002 08:18:13 +0100
Secondary reflow over wave...
<>
Mon, 22 Apr 2002 21:06:47 EDT
New Thread Senju sparkle noclean paste
Re: Senju sparkle noclean paste
Phil Bavaro
Fri, 26 Apr 2002 11:41:58 -0700
Senju sparkle noclean paste
peter lee
Fri, 26 Apr 2002 10:26:56 -0700
New Thread Serial number intelligence..
Re: Serial number intelligence..
David Fish
Thu, 4 Apr 2002 15:49:57 -0800
Serial number intelligence..
Ken Patel
Wed, 3 Apr 2002 15:36:45 -0800
New Thread Shorts in PLCC Sockets
Re: Shorts in PLCC Sockets
Andre Leclair
Wed, 24 Apr 2002 08:04:47 -0500
Re: Shorts in PLCC Sockets
Guy Ramsey
Tue, 23 Apr 2002 16:34:48 -0400
Re: Shorts in PLCC Sockets
Andre Leclair
Tue, 23 Apr 2002 13:26:33 -0500
Re: Shorts in PLCC Sockets
Miguel Vallejo
Tue, 23 Apr 2002 11:16:24 -0700
Re: Shorts in PLCC Sockets
David Douthit
Tue, 23 Apr 2002 10:24:39 -0700
Shorts in PLCC Sockets
Andre Leclair
Tue, 23 Apr 2002 11:09:01 -0500
New Thread Sign off
Sign off
Matt Kehoe
Tue, 16 Apr 2002 04:39:24 -0400
New Thread Silver
Re: Silver
Alan Groves
Sat, 20 Apr 2002 00:54:40 +0100
Re: Silver
Sauer, Steven T.
Fri, 19 Apr 2002 14:29:54 -0400
Re: Silver
Strickland, Mark
Fri, 19 Apr 2002 12:19:48 -0500
Re: Silver
Mel Parrish
Fri, 19 Apr 2002 09:15:31 -0500
Silver
Scott Kauling
Thu, 18 Apr 2002 17:15:25 -0500
New Thread Single Sided Boards - Solder fillets
Single Sided Boards - Solder fillets
David North
Thu, 4 Apr 2002 12:29:21 -0800
New Thread Single-sided board and warp
Re: Single-sided board and warp
Werner Engelmaier
Thu, 4 Apr 2002 07:10:56 EST
Re: Single-sided board and warp
Hinners Hans M Civ WRALC/LUGE
Wed, 3 Apr 2002 17:03:50 +0100
Single-sided board and warp
fullname
Wed, 3 Apr 2002 16:49:14 +0800
New Thread Single-sided/Double-sided PCB Reliability
Re: Single-sided/Double-sided PCB Reliability
Kathy Kuhlow
Wed, 10 Apr 2002 12:37:33 -0500
Re: Single-sided/Double-sided PCB Reliability
Brummer Chuck
Tue, 9 Apr 2002 14:10:39 -0700
Re: Single-sided/Double-sided PCB Reliability
<>
Mon, 8 Apr 2002 23:07:01 EDT
Re: Single-sided/Double-sided PCB Reliability
Michael Bell
Tue, 9 Apr 2002 14:37:08 +1200
Re: Single-sided/Double-sided PCB Reliability
<>
Mon, 8 Apr 2002 21:23:47 EDT
Single-sided/Double-sided PCB Reliability
Michael Bell
Tue, 9 Apr 2002 10:50:04 +1200
New Thread SIPAD flux choices
Re: SIPAD flux choices
Matt Kehoe
Thu, 11 Apr 2002 09:34:09 -0400
Re: SIPAD flux choices
Marsico, James
Thu, 11 Apr 2002 08:52:43 -0400
SIPAD flux choices
Matt Kehoe
Thu, 11 Apr 2002 05:59:25 -0500
New Thread SIPAD Shelf Life
Re: SIPAD Shelf Life
Richard Martin
Thu, 11 Apr 2002 19:24:46 -0500
SIPAD Shelf Life
Matt Kehoe
Thu, 11 Apr 2002 05:46:40 -0500
New Thread SNEC Meeting
SNEC Meeting
Gary Ferrari
Mon, 8 Apr 2002 10:41:51 EDT
SNEC Meeting
Gary Ferrari
Wed, 3 Apr 2002 16:00:51 EST
New Thread Solder alloy for 1010 Steel
Re: Solder alloy for 1010 Steel
David Fish
Tue, 9 Apr 2002 16:24:31 -0700
Re: Solder alloy for 1010 Steel
Creswick, Steven
Tue, 9 Apr 2002 09:32:01 -0400
Re: Solder alloy for 1010 Steel
Dave Hillman
Mon, 8 Apr 2002 16:58:26 -0500
Solder alloy for 1010 Steel
May William D (Dean) CNIN
Mon, 8 Apr 2002 08:47:37 -0500
New Thread Solder Ball Wrinkles
Re: Solder Ball Wrinkles
Bev Christian
Fri, 12 Apr 2002 09:01:22 -0400
Solder Ball Wrinkles
Ed Popielarski
Thu, 11 Apr 2002 16:02:23 -0700
Re: Solder Ball Wrinkles
Jindra, Larry
Wed, 10 Apr 2002 18:14:31 -0700
Re: Solder Ball Wrinkles
Dave Hillman
Mon, 1 Apr 2002 11:06:55 -0600
New Thread Spell checks
Re: Spell checks
Daniel Wong
Fri, 19 Apr 2002 15:51:11 +0800
Re: Spell checks
Brian Ellis
Thu, 18 Apr 2002 11:53:17 +0300
Re: Spell checks
<>
Thu, 18 Apr 2002 09:52:31 +0800
Re: Spell checks
Earl Moon
Wed, 17 Apr 2002 17:33:11 -0500
Re: Spell checks
Earl Moon
Wed, 17 Apr 2002 17:27:59 -0500
Re: Spell checks
Ken Carlile
Wed, 17 Apr 2002 18:31:22 -0400
Spell checks
Alan Groves
Wed, 17 Apr 2002 22:53:44 +0100
New Thread Suggestion to IPC, was Re: [TN] NTC Gold Plating Electr oless vs. Immersion
Re: Suggestion to IPC, was Re: [TN] NTC Gold Plating Electr oless vs. Immersion
Jeff Ferry
Mon, 8 Apr 2002 14:32:55 -0400
New Thread Suggestion to IPC, was Re: [TN] NTC Gold Plating Electroless vs. Immersion
Suggestion to IPC, was Re: [TN] NTC Gold Plating Electroless vs. Immersion
D.Terstegge
Mon, 8 Apr 2002 18:16:40 +0200
New Thread TAIYOYUDEN CERAMIC CAPS
Re: TAIYOYUDEN CERAMIC CAPS
<>
Wed, 24 Apr 2002 10:26:24 +0800
Re: TAIYOYUDEN CERAMIC CAPS
Seth Goodman
Tue, 23 Apr 2002 20:09:01 -0500
Re: TAIYOYUDEN CERAMIC CAPS
Guy Ramsey
Tue, 23 Apr 2002 13:29:35 -0400
TAIYOYUDEN CERAMIC CAPS
<>
Tue, 23 Apr 2002 12:10:30 -0400
New Thread TEMP EXTREME
Re: TEMP EXTREME
Marsico, James
Thu, 25 Apr 2002 08:22:00 -0400
Re: TEMP EXTREME
Werner Engelmaier
Wed, 24 Apr 2002 21:02:59 -0400
Re: TEMP EXTREME
Dave Hillman
Wed, 24 Apr 2002 18:19:39 -0500
Re: TEMP EXTREME
Graham Naisbitt
Wed, 24 Apr 2002 18:37:59 +0100
Re: TEMP EXTREME
David Douthit
Wed, 24 Apr 2002 09:33:48 -0700
TEMP EXTREME
Marsico, James
Wed, 24 Apr 2002 10:33:21 -0400
New Thread Temperature Extreme
Re: Temperature Extreme
Phillip Hinton
Thu, 25 Apr 2002 11:11:51 EDT
New Thread test for film residue
Re: test for film residue
Steve Kelly
Fri, 26 Apr 2002 15:13:56 -0400
Re: test for film residue
Steve Kelly
Fri, 26 Apr 2002 15:10:41 -0400
Re: test for film residue
Hinners Hans M Civ WRALC/LUGE
Fri, 26 Apr 2002 18:05:27 +0100
Re: test for film residue
Ted Stern
Fri, 26 Apr 2002 10:47:26 -0500
Re: test for film residue
Rudy Sedlak
Thu, 25 Apr 2002 20:50:54 EDT
test for film residue
Steve Kelly
Thu, 25 Apr 2002 15:09:12 -0400
New Thread test method to detect solder joint weakness
Re: test method to detect solder joint weakness
David Douthit
Wed, 10 Apr 2002 17:06:35 -0700
Re: test method to detect solder joint weakness
Werner Engelmaier
Wed, 10 Apr 2002 15:52:18 EDT
Re: test method to detect solder joint weakness
Werner Engelmaier
Wed, 10 Apr 2002 15:37:20 EDT
Re: test method to detect solder joint weakness
David Douthit
Wed, 10 Apr 2002 09:42:06 -0700
Re: test method to detect solder joint weakness
Graham Naisbitt
Wed, 10 Apr 2002 16:39:25 +0100
Re: test method to detect solder joint weakness
Werner Engelmaier
Tue, 9 Apr 2002 23:17:18 EDT
Re: test method to detect solder joint weakness
<>
Wed, 10 Apr 2002 08:37:45 +0800
Re: test method to detect solder joint weakness
David Douthit
Tue, 9 Apr 2002 17:31:45 -0700
Re: test method to detect solder joint weakness
Mary Lin
Tue, 9 Apr 2002 16:55:04 -0400
Re: test method to detect solder joint weakness
David Douthit
Tue, 9 Apr 2002 13:00:18 -0700
Re: test method to detect solder joint weakness
Romero, David [MMI/BOU]
Tue, 9 Apr 2002 12:33:35 -0500
test method to detect solder joint weakness
Mary Lin
Tue, 9 Apr 2002 12:53:26 -0400
New Thread test method to detect solder joint weakness - Connector Fretting
Re: test method to detect solder joint weakness - Connector Fretting
Mark E. Schumacher
Tue, 9 Apr 2002 17:29:26 -0400
New Thread The effect to printing from pas vs soldermask height
Re: The effect to printing from pas vs soldermask height
Earl Moon
Tue, 30 Apr 2002 05:58:58 -0500
The effect to printing from pas vs soldermask height
zhang shoukai
Tue, 30 Apr 2002 17:19:15 +0800
New Thread Thermal testing
Re: Thermal testing
Sauer, Steven T.
Wed, 3 Apr 2002 15:22:58 -0500
Thermal testing
Ken Carlile
Wed, 3 Apr 2002 10:00:07 -0600
New Thread Through hole components in Reflow
Re: Through hole components in Reflow
Howard Watson
Sat, 13 Apr 2002 12:59:56 -0400
Re: Through hole components in Reflow
Kathy Kuhlow
Thu, 11 Apr 2002 08:15:01 -0500
Through hole components in Reflow
Howard Watson
Wed, 10 Apr 2002 15:53:34 -0600
New Thread Tin whiskers and immersion tin coatings
Re: Tin whiskers and immersion tin coatings
Mel Parrish
Fri, 5 Apr 2002 17:10:53 -0600
Re: Tin whiskers and immersion tin coatings
Dave Hillman
Fri, 5 Apr 2002 16:16:16 -0600
Re: Tin whiskers and immersion tin coatings
Mel Parrish
Thu, 4 Apr 2002 16:11:06 -0600
Re: Tin whiskers and immersion tin coatings
Dave Hillman
Thu, 4 Apr 2002 10:15:58 -0600
Re: Tin whiskers and immersion tin coatings
Ted Stern
Thu, 4 Apr 2002 09:01:26 -0600
Re: Tin whiskers and immersion tin coatings
jbrusse
Thu, 4 Apr 2002 06:54:01 -0500
Re: Tin whiskers and immersion tin coatings
Seth Goodman
Wed, 3 Apr 2002 22:42:23 -0600
Re: Tin whiskers and immersion tin coatings
Roger Stoops
Wed, 3 Apr 2002 13:46:19 -0500
Re: Tin whiskers and immersion tin coatings
Bev Christian
Wed, 3 Apr 2002 13:37:49 -0500
Re: Tin whiskers and immersion tin coatings
Ted Stern
Wed, 3 Apr 2002 09:19:54 -0600
Re: Tin whiskers and immersion tin coatings
Steve Kelly
Wed, 3 Apr 2002 10:25:38 -0500
Tin whiskers and immersion tin coatings
Bev Christian
Tue, 2 Apr 2002 18:40:04 -0500
New Thread TPCA Show 2002 and Forum
TPCA Show 2002 and Forum
Jack Crawford
Tue, 30 Apr 2002 11:05:54 -0500
New Thread Trace width to carry high current
Re: Trace width to carry high current
Ahne Oosterhof
Tue, 23 Apr 2002 07:31:07 -0700
Re: Trace width to carry high current
<>
Tue, 23 Apr 2002 09:08:53 +0800
Re: Trace width to carry high current
<>
Mon, 22 Apr 2002 16:39:29 -0700
Re: Trace width to carry high current
Rob Legg
Mon, 22 Apr 2002 18:34:08 -0400
Re: Trace width to carry high current
<>
Mon, 22 Apr 2002 13:01:25 -0700
Re: Trace width to carry high current
Rob Legg
Mon, 22 Apr 2002 15:33:03 -0400
Trace width to carry high current
<>
Mon, 22 Apr 2002 10:13:50 -0700
New Thread uBGA routing
Re: uBGA routing
Greg Scott
Tue, 23 Apr 2002 10:29:00 -0700
uBGA routing
Alan Groves
Mon, 22 Apr 2002 12:19:38 +0100
New Thread Vacuum sealing equipment...
Vacuum sealing equipment...
<>
Tue, 30 Apr 2002 19:29:48 EDT
New Thread Via in Pad
Re: Via in Pad
Safavi-Bayat Shahed
Mon, 8 Apr 2002 08:35:26 -0400
Re: Via in Pad
<>
Fri, 5 Apr 2002 21:05:09 EST
Re: Via in Pad
Earl Moon
Fri, 5 Apr 2002 14:41:33 -0600
Re: Via in Pad
Safavi-Bayat Shahed
Fri, 5 Apr 2002 15:25:14 -0500
Re: Via in Pad
Earl Moon
Fri, 5 Apr 2002 13:59:48 -0600
Re: Via in Pad
Earl Moon
Fri, 5 Apr 2002 13:55:32 -0600
Re: Via in Pad
David Douthit
Fri, 5 Apr 2002 13:05:03 -0700
Re: Via in Pad
Earl Moon
Fri, 5 Apr 2002 12:54:54 -0600
Re: Via in Pad
Guy Ramsey
Fri, 5 Apr 2002 13:48:38 -0500
Re: Via in Pad
Earl Moon
Fri, 5 Apr 2002 11:39:30 -0600
Re: Via in Pad
Safavi-Bayat Shahed
Fri, 5 Apr 2002 09:57:03 -0500
Re: Via in Pad
Mark Charlton
Fri, 5 Apr 2002 09:35:53 -0500
Via in Pad
Bartkowaik Christine
Fri, 5 Apr 2002 08:54:03 -0500
New Thread Via in Pad: Filling of vias using silver epoxy!?!?
Re: Via in Pad: Filling of vias using silver epoxy!?!?
Safavi-Bayat Shahed
Fri, 19 Apr 2002 08:55:31 -0400
Re: Via in Pad: Filling of vias using silver epoxy!?!?
<>
Fri, 19 Apr 2002 08:22:40 +0800
Via in Pad: Filling of vias using silver epoxy!?!?
Ken Patel
Thu, 18 Apr 2002 15:20:35 -0700
New Thread Via Plug
Re: Via Plug
Mcmaster, Michael
Tue, 30 Apr 2002 15:21:58 -0700
Re: Via Plug
Earl Moon
Tue, 30 Apr 2002 06:01:46 -0500
Re: Via Plug
<>
Tue, 30 Apr 2002 08:40:29 +0800
Re: Via Plug
Earl Moon
Mon, 29 Apr 2002 16:49:17 -0500
Re: Via Plug
Marsico, James
Mon, 29 Apr 2002 15:18:00 -0400
Re: Via Plug
Dwight Mattix
Mon, 29 Apr 2002 10:25:59 -0700
Re: Via Plug
FOX, Ian (York Rd)
Mon, 29 Apr 2002 10:00:05 +0100
Re: Via Plug
<>
Mon, 29 Apr 2002 13:39:38 +0800
Re: Via Plug
Earl Moon
Sat, 27 Apr 2002 12:48:12 -0500
Re: Via Plug
<>
Sat, 27 Apr 2002 13:29:34 EDT
Re: Via Plug
Mcmaster, Michael
Fri, 26 Apr 2002 08:58:11 -0700
Re: Via Plug
John Foster
Wed, 24 Apr 2002 11:29:19 -0700
Re: Via Plug
Marsico, James
Wed, 24 Apr 2002 07:10:02 -0400
Re: Via Plug
McMullen, Kerry
Tue, 23 Apr 2002 16:28:16 -0400
Via Plug
John Foster
Tue, 23 Apr 2002 12:06:43 -0700
New Thread Vias in pads
Re: Vias in pads
<>
Tue, 9 Apr 2002 08:12:03 +0800
Re: Vias in pads
Dieselberg, Ron
Mon, 8 Apr 2002 06:41:56 -0400
Re: Vias in pads
Earl Moon
Mon, 8 Apr 2002 05:28:00 -0500
Re: Vias in pads
<>
Mon, 8 Apr 2002 14:41:29 +0800
Re: Vias in pads
fullname
Fri, 5 Apr 2002 07:58:49 +0800
Re: Vias in pads
Maddox, Allen T
Thu, 4 Apr 2002 09:43:29 -0500
Re: Vias in pads
Maddox, Allen T
Thu, 4 Apr 2002 08:38:06 -0500
Re: Vias in pads
James TerVeen
Thu, 4 Apr 2002 08:45:48 -0500
Re: Vias in pads
Maddox, Allen T
Thu, 4 Apr 2002 08:48:06 -0500
Re: Vias in pads
Mark Charlton
Thu, 4 Apr 2002 07:39:40 -0500
Re: Vias in pads
<>
Wed, 3 Apr 2002 22:39:03 EST
Re: Vias in pads
Don Vischulis
Wed, 3 Apr 2002 19:04:51 -0600
Re: Vias in pads
Brooks,Bill
Wed, 3 Apr 2002 16:19:44 -0800
Re: Vias in pads
<>
Wed, 3 Apr 2002 19:05:53 EST
Re: Vias in pads
<>
Wed, 3 Apr 2002 16:45:54 EST
Re: Vias in pads
Earl Moon
Wed, 3 Apr 2002 14:51:43 -0600
Vias in pads
Mark Charlton
Wed, 3 Apr 2002 13:55:27 -0500
New Thread Voids on BGA
Re: Voids on BGA
Chris Christian
Thu, 11 Apr 2002 11:01:23 -0400
Re: Voids on BGA
Guy Ramsey
Thu, 11 Apr 2002 10:18:03 -0400
Re: Voids on BGA
<>
Thu, 11 Apr 2002 15:59:34 +0800
Re: Voids on BGA
Randy Bock Sr.
Wed, 10 Apr 2002 10:41:27 -0400
Re: Voids on BGA
d. terstegge
Wed, 10 Apr 2002 16:02:41 +0200
Voids on BGA
Antonio Souza
Wed, 10 Apr 2002 07:25:00 -0500
New Thread Wanted: AM79C970AVIW
Re: Wanted: AM79C970AVIW
Randy Bock Sr.
Tue, 23 Apr 2002 11:01:02 -0400
Wanted: AM79C970AVIW
<>
Tue, 23 Apr 2002 13:20:00 +0800
New Thread Wanted: CM auditor
Wanted: CM auditor
Simms, Michael
Thu, 25 Apr 2002 11:06:33 -0500
New Thread White residue on LPI Solder Mask coated (and incompletel y cured) PWAs, Is it a technical concern?
Re: White residue on LPI Solder Mask coated (and incompletel y cured) PWAs, Is it a technical concern?
Albin, David
Tue, 2 Apr 2002 09:27:23 +0100
New Thread White residue on LPI Solder Mask coated (and incompletely cured) PWAs, Is it a technical concern?
Re: White residue on LPI Solder Mask coated (and incompletely cured) PWAs, Is it a technical concern?
tony steinke
Thu, 4 Apr 2002 18:00:01 -0800
Re: White residue on LPI Solder Mask coated (and incompletely cured) PWAs, Is it a technical concern?
<>
Wed, 3 Apr 2002 08:44:43 +0800
New Thread White residue on LPI Solder Mask coated (and incompletelycured)PWAs, Is it a technical concern?
Re: White residue on LPI Solder Mask coated (and incompletelycured)PWAs, Is it a technical concern?
Earl Moon
Tue, 2 Apr 2002 05:17:11 -0600
Re: White residue on LPI Solder Mask coated (and incompletelycured)PWAs, Is it a technical concern?
Brian Ellis
Tue, 2 Apr 2002 12:58:02 +0300
New Thread WRONG FORUM Congress, off shore components, and the DoD
Re: WRONG FORUM Congress, off shore components, and the DoD
Jack Crawford
Tue, 9 Apr 2002 18:11:16 -0500
New Thread [TN] Immersion Gold Vs Immersion Tin for 0201 landpatterns
Fw: [TN] Immersion Gold Vs Immersion Tin for 0201 landpatterns
tony steinke
Fri, 26 Apr 2002 09:30:24 -0700

ATOM RSS1 RSS2