TECHNET Archives

October 2015

TechNet@IPC.ORG
Options: Hide Table of Contents

Bev Christian (3 Messages)
Bhanu Sood (1 Message)
Bob METCALF (1 Message)
Bob Wettermann (2 Messages)
Brian Ellis (3 Messages)
Bush, Brien (3 Messages)
CANTAGALLO Luigi (2 Messages)
Carroll, Thomas A (3 Messages)
Chuck Brummer (1 Message)
Craig Sullivan (2 Messages)
Datacom - Juliano Ribeiro (3 Messages)
David Bealer (1 Message)
David Hillman (12 Messages)
Deng RongJun (12 Messages)
Dennis Fritz (3 Messages)
Douglas Pauls (5 Messages)
Drew meyer (1 Message)
Ed Popielarski (16 Messages)
Giamis, Andy (1 Message)
Gorka BIROT (2 Messages)
Graham Collins (2 Messages)
Greg Munie (1 Message)
Gregg Owens (3 Messages)
Gumpert, Ben (2 Messages)
Guy Ramsey (6 Messages)
Ioan Tempea (6 Messages)
Jack Olson (1 Message)
James Head (2 Messages)
Jenkins, Jeffrey A @ CSG - LINKABIT (1 Message)
John Anselmo (1 Message)
John Maxwell (1 Message)
Jonathan Griffiths (1 Message)
Joyce Koo (19 Messages)
Juan T. Marugan (1 Message)
Julie Silk (2 Messages)
Ken Harp (1 Message)
Leland Woodall (1 Message)
Louis Hart (4 Messages)
Mattix, Dwight (6 Messages)
Mike Fenner (4 Messages)
Mike Kirschner (1 Message)
Nutting, Phil (4 Messages)
Peter Barton (1 Message)
Peter G. Houwen (1 Message)
Ramakrishnan Saravanan (1 Message)
Richard Kraszewski (1 Message)
Robert e. welch (4 Messages)
Robert Kondner (5 Messages)
Roger Mack (1 Message)
Stadem, Richard D. (26 Messages)
Steve Gregory (6 Messages)
Steven Kelly (2 Messages)
Sue Powers-Hartman (1 Message)
Tan Geok Ang (7 Messages)
Theodore J Tontis (1 Message)
Thierolf, Chris @ MPSG - SPD (2 Messages)
Tony Lentz (2 Messages)
Torsten Hagge (2 Messages)
Victor Hernandez (12 Messages)
Vladimir Igoshev (7 Messages)
Wayne Thayer (4 Messages)
William Coleman (1 Message)
Yuan-chia Joyce Koo (7 Messages)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender Bev Christian
Bismuth Nitrate
Bev Christian
Wed, 7 Oct 2015 20:34:52 -0400
Re: No-wetting on Mini USB (Nickel plating)
Bev Christian
Thu, 29 Oct 2015 20:09:31 -0400
Re: No-wetting on Mini USB (Nickel plating)
Bev Christian
Fri, 30 Oct 2015 21:09:18 -0400
New Sender Bhanu Sood
Re: Ropy grunge in IC
Bhanu Sood
Thu, 8 Oct 2015 12:49:55 -0400
New Sender Bob METCALF
Re: Direct Immersion Gold or soft ENIG
Bob METCALF
Thu, 22 Oct 2015 19:21:26 -0700
New Sender Bob Wettermann
Class III and Repairs
Bob Wettermann
Tue, 13 Oct 2015 17:57:17 -0500
Re: Solder mask removal
Bob Wettermann
Thu, 1 Oct 2015 11:10:34 -0500
New Sender Brian Ellis
Re: Element Quiz Question
Brian Ellis
Fri, 16 Oct 2015 17:57:53 +0300
Re: Element Quiz Question
Brian Ellis
Fri, 30 Oct 2015 17:11:08 +0200
Re: Element Quiz Question
Brian Ellis
Fri, 30 Oct 2015 17:12:42 +0200
New Sender Bush, Brien
Re: Lubrication for wave solder pot lift spindles
Bush, Brien
Tue, 13 Oct 2015 16:23:51 +0000
Re: Lubrication for wave solder pot lift spindles
Bush, Brien
Tue, 13 Oct 2015 16:50:14 +0000
Re: Lubrication for wave solder pot lift spindles - Bayesian Filter detected spam
Bush, Brien
Tue, 13 Oct 2015 17:45:35 +0000
New Sender CANTAGALLO Luigi
Clean room
CANTAGALLO Luigi
Thu, 8 Oct 2015 07:58:15 +0200
Re: Clean room
CANTAGALLO Luigi
Fri, 9 Oct 2015 07:08:26 +0200
New Sender Carroll, Thomas A
Re: Element Quiz Answer
Carroll, Thomas A
Fri, 30 Oct 2015 21:04:42 +0000
Re: Element Quiz Question
Carroll, Thomas A
Thu, 22 Oct 2015 22:24:46 +0000
Re: Element Quiz Question
Carroll, Thomas A
Fri, 30 Oct 2015 15:09:10 +0000
New Sender Chuck Brummer
Re: Element Quiz Question
Chuck Brummer
Fri, 30 Oct 2015 16:14:09 +0000
New Sender Craig Sullivan
Re: ENIG coating durability
Craig Sullivan
Thu, 8 Oct 2015 08:46:30 -0400
Re: ENIG VS. ammonia
Craig Sullivan
Thu, 8 Oct 2015 13:25:51 -0400
New Sender Datacom - Juliano Ribeiro
Baking to populated boards to rework
Datacom - Juliano Ribeiro
Fri, 23 Oct 2015 09:07:05 -0200
RES: [TN] Element Quiz Question
Datacom - Juliano Ribeiro
Fri, 9 Oct 2015 11:22:39 -0300
RES: [TN] Element Quiz Question
Datacom - Juliano Ribeiro
Fri, 23 Oct 2015 08:42:47 -0200
New Sender David Bealer
Re: Element Quiz Question
David Bealer
Fri, 30 Oct 2015 15:09:03 +0000
New Sender David Hillman
Re: Class III and Repairs
David Hillman
Wed, 14 Oct 2015 08:17:53 -0500
Element Quiz Answer
David Hillman
Fri, 9 Oct 2015 13:03:23 -0500
Element Quiz Answer
David Hillman
Fri, 16 Oct 2015 13:13:06 -0500
Element Quiz Answer
David Hillman
Fri, 23 Oct 2015 07:39:44 -0500
Element Quiz Answer
David Hillman
Fri, 30 Oct 2015 11:24:09 -0500
Element Quiz Question
David Hillman
Fri, 9 Oct 2015 08:21:55 -0500
Element Quiz Question
David Hillman
Fri, 16 Oct 2015 09:50:47 -0500
Element Quiz Question
David Hillman
Thu, 22 Oct 2015 18:18:35 -0400
Element Quiz Question
David Hillman
Fri, 30 Oct 2015 10:05:50 -0500
Re: ENIG VS. ammonia
David Hillman
Wed, 7 Oct 2015 16:58:47 -0500
Re: No-wetting on Mini USB (Nickel plating)
David Hillman
Thu, 29 Oct 2015 13:31:00 -0500
Re: soldering to stainless
David Hillman
Fri, 16 Oct 2015 07:28:25 -0500
New Sender Deng RongJun
Re: Land bond strength on rigid board
Deng RongJun
Thu, 8 Oct 2015 09:26:30 +0000
Maximum number of reflow cycles for rigid PCB
Deng RongJun
Tue, 27 Oct 2015 09:50:22 +0000
No-wetting on Mini USB (Nickel plating)
Deng RongJun
Thu, 29 Oct 2015 07:32:56 +0000
Re: No-wetting on Mini USB (Nickel plating)
Deng RongJun
Thu, 29 Oct 2015 09:32:43 +0000
Re: No-wetting on Mini USB (Nickel plating)
Deng RongJun
Fri, 30 Oct 2015 05:39:16 +0000
Solder joint peel off from ENIG board
Deng RongJun
Fri, 9 Oct 2015 08:12:39 +0000
Re: Solder joint peel off from ENIG board
Deng RongJun
Sat, 10 Oct 2015 03:44:51 +0000
Re: Solder joint peel off from ENIG board
Deng RongJun
Sat, 10 Oct 2015 04:30:12 +0000
Re: Solder joint peel off from ENIG board
Deng RongJun
Mon, 12 Oct 2015 03:39:46 +0000
Soldering temperature setting
Deng RongJun
Fri, 23 Oct 2015 04:28:41 +0000
Re: Soldering temperature setting
Deng RongJun
Fri, 23 Oct 2015 09:03:49 +0000
Re: Soldering temperature setting
Deng RongJun
Tue, 27 Oct 2015 09:41:49 +0000
New Sender Dennis Fritz
Re: Difference between MIL-PRF-55110G and 31032
Dennis Fritz
Wed, 14 Oct 2015 11:52:16 -0400
Re: Element Quiz Answer
Dennis Fritz
Fri, 16 Oct 2015 14:44:14 -0400
Re: Element Quiz Question
Dennis Fritz
Fri, 16 Oct 2015 10:57:41 -0400
New Sender Douglas Pauls
Re: Clean room
Douglas Pauls
Thu, 8 Oct 2015 10:25:29 -0500
Re: Element Quiz Question
Douglas Pauls
Thu, 22 Oct 2015 19:43:59 -0500
Re: Element Quiz Question
Douglas Pauls
Thu, 22 Oct 2015 22:21:31 -0500
Re: IPC-A-610
Douglas Pauls
Wed, 21 Oct 2015 10:07:54 -0500
Re: Solder mask type versus raw board/card finish
Douglas Pauls
Mon, 5 Oct 2015 12:01:27 -0500
New Sender Drew meyer
Re: Element Quiz Question
Drew meyer
Fri, 9 Oct 2015 13:29:03 +0000
New Sender Ed Popielarski
Re: Element Quiz Question
Ed Popielarski
Thu, 22 Oct 2015 22:22:21 +0000
ENIG VS. ammonia
Ed Popielarski
Wed, 7 Oct 2015 20:46:20 +0000
Re: ENIG VS. ammonia
Ed Popielarski
Wed, 7 Oct 2015 22:25:46 +0000
Re: ENIG VS. ammonia
Ed Popielarski
Thu, 8 Oct 2015 14:47:59 +0000
Re: ENIG VS. ammonia
Ed Popielarski
Thu, 8 Oct 2015 15:08:07 +0000
Re: ENIG VS. ammonia
Ed Popielarski
Thu, 8 Oct 2015 15:21:29 +0000
Re: ENIG VS. ammonia
Ed Popielarski
Fri, 9 Oct 2015 16:23:21 +0000
Re: ENIG VS. ammonia
Ed Popielarski
Fri, 9 Oct 2015 16:31:32 +0000
Re: IPC-A-610
Ed Popielarski
Wed, 21 Oct 2015 14:46:12 +0000
Re: IPC-A-610
Ed Popielarski
Wed, 21 Oct 2015 14:50:20 +0000
Re: Lubrication for wave solder pot lift spindles
Ed Popielarski
Tue, 13 Oct 2015 16:32:39 +0000
Re: Lubrication for wave solder pot lift spindles
Ed Popielarski
Tue, 13 Oct 2015 16:50:05 +0000
Re: Solder mask removal, SMOBC
Ed Popielarski
Fri, 2 Oct 2015 15:15:38 +0000
Re: Solder mask removal, SMOBC
Ed Popielarski
Fri, 2 Oct 2015 15:20:28 +0000
Re: Solder mask removal, SMOBC
Ed Popielarski
Fri, 2 Oct 2015 16:02:52 +0000
Re: Solder mask removal, SMOBC
Ed Popielarski
Fri, 2 Oct 2015 16:27:35 +0000
New Sender Giamis, Andy
Re: Ropy grunge in IC
Giamis, Andy
Thu, 8 Oct 2015 17:42:03 +0000
New Sender Gorka BIROT
Class 2/3 test report traceability
Gorka BIROT
Fri, 30 Oct 2015 19:30:46 +0100
Re: Class 2/3 test report traceability
Gorka BIROT
Fri, 30 Oct 2015 21:06:18 +0100
New Sender Graham Collins
Re: Class III and Repairs
Graham Collins
Wed, 14 Oct 2015 11:40:53 +0000
Re: Class III and Repairs
Graham Collins
Wed, 14 Oct 2015 14:17:56 +0000
New Sender Greg Munie
Re: Element Quiz Question
Greg Munie
Fri, 9 Oct 2015 13:38:30 +0000
New Sender Gregg Owens
Re: Clean room
Gregg Owens
Thu, 8 Oct 2015 08:05:47 -0700
Re: ESD concern
Gregg Owens
Tue, 20 Oct 2015 16:18:57 -0700
Re: J-STD-001: Humidity control
Gregg Owens
Wed, 28 Oct 2015 16:38:48 -0700
New Sender Gumpert, Ben
Re: EXTERNAL: [TN] Class III and Repairs
Gumpert, Ben
Thu, 15 Oct 2015 13:15:54 +0000
Re: IPC-A-610
Gumpert, Ben
Fri, 16 Oct 2015 13:38:52 +0000
New Sender Guy Ramsey
Re: No-wetting on Mini USB (Nickel plating)
Guy Ramsey
Thu, 29 Oct 2015 16:18:30 -0400
Re: No-wetting on Mini USB (Nickel plating)
Guy Ramsey
Fri, 30 Oct 2015 08:10:57 -0400
Re: No-wetting on Mini USB (Nickel plating)
Guy Ramsey
Fri, 30 Oct 2015 09:05:27 -0400
Re: Pierced Terminal
Guy Ramsey
Fri, 30 Oct 2015 08:36:44 -0400
Re: Soldering temperature setting
Guy Ramsey
Mon, 26 Oct 2015 15:24:57 -0400
soldering to stainless
Guy Ramsey
Fri, 16 Oct 2015 08:14:15 -0400
New Sender Ioan Tempea
AOI machines
Ioan Tempea
Thu, 8 Oct 2015 20:11:21 +0000
AOI machines
Ioan Tempea
Tue, 13 Oct 2015 11:37:18 +0000
Re: Baking to populated boards to rework
Ioan Tempea
Mon, 26 Oct 2015 11:55:31 +0000
Re: Element Quiz Question
Ioan Tempea
Fri, 16 Oct 2015 14:58:41 +0000
Re: ESD concern
Ioan Tempea
Wed, 21 Oct 2015 11:43:19 +0000
Re: No-wetting on Mini USB (Nickel plating)
Ioan Tempea
Fri, 30 Oct 2015 12:22:49 +0000
New Sender Jack Olson
Re: IPC-A-610
Jack Olson
Tue, 20 Oct 2015 10:40:12 -0500
New Sender James Head
Re: Element Quiz Question
James Head
Fri, 30 Oct 2015 15:10:24 +0000
Re: IPC-A-610
James Head
Wed, 21 Oct 2015 08:14:36 +0000
New Sender Jenkins, Jeffrey A @ CSG - LINKABIT
Re: Baking to populated boards to rework
Jenkins, Jeffrey A @ CSG - LINKABIT
Mon, 26 Oct 2015 16:47:15 +0000
New Sender John Anselmo
Cable Label Printers
John Anselmo
Thu, 1 Oct 2015 18:02:12 +0000
New Sender John Maxwell
Re: Element Quiz Question
John Maxwell
Fri, 30 Oct 2015 13:52:07 -0400
New Sender Jonathan Griffiths
Re: Element Quiz Answer
Jonathan Griffiths
Mon, 19 Oct 2015 08:53:15 +0100
New Sender Joyce Koo
Re: AOI machines
Joyce Koo
Tue, 13 Oct 2015 09:00:03 -0400
Re: Clean room
Joyce Koo
Fri, 9 Oct 2015 08:43:07 -0400
Re: Direct Immersion Gold or soft ENIG
Joyce Koo
Thu, 22 Oct 2015 16:23:49 -0400
Re: Element Quiz Question
Joyce Koo
Fri, 23 Oct 2015 09:35:30 -0400
Re: ESD concern
Joyce Koo
Wed, 21 Oct 2015 13:10:37 -0400
Re: IPC-A-610
Joyce Koo
Wed, 21 Oct 2015 13:19:43 -0400
Re: Press-Fit Connectors for Space application
Joyce Koo
Tue, 27 Oct 2015 13:54:55 -0400
Re: Ropy grunge in IC
Joyce Koo
Thu, 8 Oct 2015 16:50:44 -0400
Re: Ropy grunge in IC
Joyce Koo
Thu, 8 Oct 2015 16:53:25 -0400
Re: Ropy grunge in IC
Joyce Koo
Fri, 9 Oct 2015 14:44:52 -0400
Re: Ropy grunge in IC
Joyce Koo
Fri, 9 Oct 2015 16:08:30 -0400
Re: Solder joint peel off from ENIG board
Joyce Koo
Fri, 9 Oct 2015 08:53:00 -0400
Re: Solder joint peel off from ENIG board
Joyce Koo
Fri, 9 Oct 2015 11:37:17 -0400
Re: FW: Solder mask removal, SMOBC
Joyce Koo
Fri, 2 Oct 2015 08:22:56 -0400
Re: Solder mask removal, SMOBC
Joyce Koo
Fri, 2 Oct 2015 11:49:59 -0400
Re: Solder mask removal, SMOBC
Joyce Koo
Fri, 2 Oct 2015 12:13:42 -0400
Re: Solder mask removal, SMOBC
Joyce Koo
Fri, 2 Oct 2015 12:45:06 -0400
Re: Solder mask type versus raw board/card finish
Joyce Koo
Mon, 5 Oct 2015 12:53:17 -0400
Re: Soldering temperature setting
Joyce Koo
Mon, 26 Oct 2015 15:47:19 -0400
New Sender Juan T. Marugan
J-STD-001: Humidity control
Juan T. Marugan
Wed, 28 Oct 2015 15:35:33 -0500
New Sender Julie Silk
Re: Press-Fit Connectors for Space application
Julie Silk
Thu, 29 Oct 2015 10:47:32 -0500
Ropy grunge in IC
Julie Silk
Thu, 8 Oct 2015 11:21:14 -0500
New Sender Ken Harp
Re: Element Quiz Question
Ken Harp
Fri, 30 Oct 2015 10:54:46 -0700
New Sender Leland Woodall
Re: Soldering temperature setting
Leland Woodall
Mon, 26 Oct 2015 17:31:13 +0000
New Sender Louis Hart
Re: Class 2/3 test report traceability
Louis Hart
Fri, 30 Oct 2015 19:00:03 +0000
Re: Difference between MIL-PRF-55110G and 31032
Louis Hart
Wed, 14 Oct 2015 18:07:52 +0000
Re: ESD concern
Louis Hart
Wed, 21 Oct 2015 12:12:32 +0000
Re: Solder mask removal, SMOBC
Louis Hart
Fri, 2 Oct 2015 15:00:28 +0000
New Sender Mattix, Dwight
Re: IPC-A-610
Mattix, Dwight
Tue, 20 Oct 2015 16:46:52 +0000
Re: IPC-A-610
Mattix, Dwight
Wed, 21 Oct 2015 13:03:08 +0000
Re: IPC-A-610
Mattix, Dwight
Wed, 21 Oct 2015 14:39:46 +0000
Re: IPC-A-610
Mattix, Dwight
Wed, 21 Oct 2015 14:47:09 +0000
Re: IPC-A-610
Mattix, Dwight
Wed, 21 Oct 2015 18:33:06 +0000
Re: Solder joint peel off from ENIG board
Mattix, Dwight
Fri, 9 Oct 2015 12:57:51 +0000
New Sender Mike Fenner
Re: ESD concern
Mike Fenner
Wed, 21 Oct 2015 16:06:41 +0100
Re: Is everyone busy or napping
Mike Fenner
Sun, 25 Oct 2015 19:26:44 -0000
Re: No-wetting on Mini USB (Nickel plating)
Mike Fenner
Fri, 30 Oct 2015 12:01:57 -0000
Re: soldering to stainless
Mike Fenner
Fri, 16 Oct 2015 15:39:39 +0100
New Sender Mike Kirschner
Re: Ropy grunge in IC
Mike Kirschner
Fri, 9 Oct 2015 13:15:32 -0500
New Sender Nutting, Phil
Re: IPC-A-610
Nutting, Phil
Fri, 16 Oct 2015 13:19:23 +0000
Re: soldering to stainless
Nutting, Phil
Fri, 16 Oct 2015 13:07:04 +0000
to solder or not to solder Litz wire in crimp lug
Nutting, Phil
Thu, 22 Oct 2015 20:29:41 +0000
Re: to solder or not to solder Litz wire in crimp lug
Nutting, Phil
Thu, 22 Oct 2015 21:15:13 +0000
New Sender Peter Barton
Element Quiz Question
Peter Barton
Fri, 23 Oct 2015 08:40:18 +0000
New Sender Peter G. Houwen
Re: IPC-A-610
Peter G. Houwen
Wed, 21 Oct 2015 08:59:53 -0500
New Sender Ramakrishnan Saravanan
Difference between MIL-PRF-55110G and 31032
Ramakrishnan Saravanan
Wed, 14 Oct 2015 09:44:29 -0500
New Sender Richard Kraszewski
Re: Selective Conformal Coat Systems
Richard Kraszewski
Thu, 29 Oct 2015 16:16:50 +0000
New Sender Robert e. welch
Re: Element Quiz Question
Robert e. welch
Fri, 16 Oct 2015 14:58:45 +0000
Re: Element Quiz Question
Robert e. welch
Fri, 30 Oct 2015 15:09:21 +0000
Re: ENIG VS. ammonia
Robert e. welch
Fri, 9 Oct 2015 16:09:46 +0000
Re: ENIG VS. ammonia
Robert e. welch
Fri, 9 Oct 2015 16:26:10 +0000
New Sender Robert Kondner
Re: Element Quiz Question
Robert Kondner
Thu, 22 Oct 2015 18:58:16 -0400
Re: ESD concern
Robert Kondner
Tue, 20 Oct 2015 19:33:29 -0400
Re: No-wetting on Mini USB (Nickel plating)
Robert Kondner
Thu, 29 Oct 2015 16:08:33 -0400
Re: to solder or not to solder Litz wire in crimp lug
Robert Kondner
Thu, 22 Oct 2015 17:09:29 -0400
Re: to solder or not to solder Litz wire in crimp lug
Robert Kondner
Thu, 22 Oct 2015 18:17:15 -0400
New Sender Roger Mack
Re: Lubrication for wave solder pot lift spindles
Roger Mack
Tue, 13 Oct 2015 12:02:45 -0500
New Sender Stadem, Richard D.
Re: AOI machines
Stadem, Richard D.
Tue, 13 Oct 2015 14:17:45 +0000
Re: Baking to populated boards to rework
Stadem, Richard D.
Mon, 26 Oct 2015 12:58:00 +0000
Re: Class III and Repairs
Stadem, Richard D.
Wed, 14 Oct 2015 13:58:25 +0000
Re: Clean room
Stadem, Richard D.
Thu, 8 Oct 2015 15:31:17 +0000
Re: Element Quiz Question
Stadem, Richard D.
Fri, 30 Oct 2015 17:50:01 +0000
Re: Element Quiz Question
Stadem, Richard D.
Fri, 30 Oct 2015 18:01:27 +0000
Re: ENIG VS. ammonia
Stadem, Richard D.
Thu, 8 Oct 2015 15:29:19 +0000
Re: ENIG VS. ammonia
Stadem, Richard D.
Thu, 8 Oct 2015 17:29:10 +0000
ESD mats
Stadem, Richard D.
Wed, 21 Oct 2015 13:12:02 +0000
Re: IPC-A-610
Stadem, Richard D.
Fri, 16 Oct 2015 16:20:37 +0000
Re: IPC-A-610
Stadem, Richard D.
Fri, 16 Oct 2015 16:29:30 +0000
Re: IPC-A-610
Stadem, Richard D.
Fri, 16 Oct 2015 16:30:46 +0000
Re: IPC-A-610
Stadem, Richard D.
Wed, 21 Oct 2015 13:17:11 +0000
Re: Lubrication for wave solder pot lift spindles
Stadem, Richard D.
Tue, 13 Oct 2015 18:06:15 +0000
Re: Lubrication for wave solder pot lift spindles
Stadem, Richard D.
Tue, 13 Oct 2015 18:08:43 +0000
Re: Press-Fit Connectors for Space application
Stadem, Richard D.
Wed, 28 Oct 2015 15:04:25 +0000
Re: Ropy grunge in IC
Stadem, Richard D.
Thu, 8 Oct 2015 17:31:41 +0000
Re: Ropy grunge in IC
Stadem, Richard D.
Thu, 8 Oct 2015 18:26:22 +0000
Re: Solder mask removal, SMOBC
Stadem, Richard D.
Fri, 2 Oct 2015 12:36:17 +0000
Re: Solder mask removal, SMOBC
Stadem, Richard D.
Fri, 2 Oct 2015 15:14:37 +0000
Re: Solder mask removal, SMOBC
Stadem, Richard D.
Fri, 2 Oct 2015 15:19:24 +0000
Re: Solder mask removal, SMOBC
Stadem, Richard D.
Fri, 2 Oct 2015 15:25:09 +0000
Re: Solder mask removal, SMOBC
Stadem, Richard D.
Fri, 2 Oct 2015 15:58:52 +0000
Re: Solder mask type versus raw board/card finish
Stadem, Richard D.
Mon, 5 Oct 2015 18:07:09 +0000
Re: Solder mask type versus raw board/card finish
Stadem, Richard D.
Mon, 5 Oct 2015 19:40:08 +0000
Re: soldering to stainless
Stadem, Richard D.
Fri, 16 Oct 2015 16:34:35 +0000
New Sender Steve Gregory
Re: ENIG VS. ammonia
Steve Gregory
Wed, 7 Oct 2015 15:15:25 -0600
Re: ENIG VS. ammonia
Steve Gregory
Thu, 8 Oct 2015 09:30:06 -0600
Re: IPC-A-610
Steve Gregory
Wed, 21 Oct 2015 07:59:30 -0600
Lubrication for wave solder pot lift spindles
Steve Gregory
Tue, 13 Oct 2015 10:06:37 -0600
Re: Press-Fit Connectors for Space application
Steve Gregory
Tue, 27 Oct 2015 12:10:12 -0600
Re: Ropy grunge in IC
Steve Gregory
Thu, 8 Oct 2015 10:31:08 -0600
New Sender Steven Kelly
Direct Immersion Gold or soft ENIG
Steven Kelly
Thu, 22 Oct 2015 15:29:00 -0400
Re: Direct Immersion Gold or soft ENIG
Steven Kelly
Fri, 23 Oct 2015 09:18:45 -0400
New Sender Sue Powers-Hartman
ESD concern
Sue Powers-Hartman
Tue, 20 Oct 2015 17:57:22 -0500
New Sender Tan Geok Ang
Re: ENIG VS. ammonia
Tan Geok Ang
Fri, 9 Oct 2015 04:40:54 +0000
Press-Fit Connectors for Space application
Tan Geok Ang
Tue, 27 Oct 2015 14:50:20 +0000
Re: Press-Fit Connectors for Space application
Tan Geok Ang
Wed, 28 Oct 2015 14:50:34 +0000
Re: Press-Fit Connectors for Space application
Tan Geok Ang
Wed, 28 Oct 2015 14:51:18 +0000
Re: Press-Fit Connectors for Space application
Tan Geok Ang
Thu, 29 Oct 2015 00:49:07 +0000
Re: Press-Fit Connectors for Space application
Tan Geok Ang
Fri, 30 Oct 2015 06:26:25 +0000
Re: Solder joint peel off from ENIG board
Tan Geok Ang
Mon, 12 Oct 2015 02:20:59 +0000
New Sender Theodore J Tontis
Re: IPC-A-610
Theodore J Tontis
Wed, 21 Oct 2015 16:09:22 +0000
New Sender Thierolf, Chris @ MPSG - SPD
Re: Element Quiz Question
Thierolf, Chris @ MPSG - SPD
Thu, 22 Oct 2015 22:32:39 +0000
Pierced Terminal
Thierolf, Chris @ MPSG - SPD
Thu, 29 Oct 2015 23:43:55 +0000
New Sender Tony Lentz
Re: ENIG VS. ammonia
Tony Lentz
Fri, 9 Oct 2015 13:05:40 +0000
Re: Solder mask removal, SMOBC
Tony Lentz
Fri, 2 Oct 2015 13:12:39 +0000
New Sender Torsten Hagge
AW: [TN] Element Quiz Answer
Torsten Hagge
Mon, 12 Oct 2015 12:55:14 +0000
AW: [TN] Element Quiz Question
Torsten Hagge
Fri, 9 Oct 2015 13:24:28 +0000
New Sender Victor Hernandez
IPC-A-610
Victor Hernandez
Thu, 15 Oct 2015 08:00:22 -0500
Re: IPC-A-610
Victor Hernandez
Thu, 15 Oct 2015 15:11:19 -0500
Re: IPC-A-610
Victor Hernandez
Fri, 16 Oct 2015 08:35:23 -0500
Re: IPC-A-610
Victor Hernandez
Fri, 16 Oct 2015 08:47:36 -0500
Is everyone busy or napping
Victor Hernandez
Fri, 23 Oct 2015 13:27:01 -0500
Solder Float Test/Thermal stress
Victor Hernandez
Fri, 23 Oct 2015 12:31:20 -0500
Solder Float Test/Thermal stress
Victor Hernandez
Mon, 26 Oct 2015 06:33:50 -0500
Re: Solder Float Test/Thermal stress
Victor Hernandez
Mon, 26 Oct 2015 11:46:47 -0500
Solder mask removal
Victor Hernandez
Thu, 1 Oct 2015 10:56:29 -0500
FW: Solder mask removal, SMOBC
Victor Hernandez
Fri, 2 Oct 2015 06:51:35 -0500
Solder mask type versus raw board/card finish
Victor Hernandez
Mon, 5 Oct 2015 11:04:27 -0500
Re: Solder mask type versus raw board/card finish
Victor Hernandez
Mon, 5 Oct 2015 13:33:00 -0500
New Sender Vladimir Igoshev
Re: ENIG VS. ammonia
Vladimir Igoshev
Thu, 8 Oct 2015 00:07:20 +0200
Re: ENIG VS. ammonia
Vladimir Igoshev
Thu, 8 Oct 2015 07:25:11 +0200
Re: ENIG VS. ammonia
Vladimir Igoshev
Thu, 8 Oct 2015 17:28:24 +0200
Re: ENIG VS. ammonia
Vladimir Igoshev
Thu, 8 Oct 2015 17:38:36 +0200
Re: No-wetting on Mini USB (Nickel plating)
Vladimir Igoshev
Thu, 29 Oct 2015 20:27:38 -0400
Re: Solder joint peel off from ENIG board
Vladimir Igoshev
Fri, 9 Oct 2015 12:08:32 +0200
Re: Solder joint peel off from ENIG board
Vladimir Igoshev
Sat, 10 Oct 2015 07:38:08 +0200
New Sender Wayne Thayer
Re: Ropy grunge in IC
Wayne Thayer
Thu, 8 Oct 2015 16:47:25 +0000
Re: Ropy grunge in IC
Wayne Thayer
Thu, 8 Oct 2015 18:11:00 +0000
Re: Ropy grunge in IC
Wayne Thayer
Fri, 9 Oct 2015 18:57:13 +0000
Re: Solder joint peel off from ENIG board
Wayne Thayer
Fri, 9 Oct 2015 13:02:15 +0000
New Sender William Coleman
Re: Element Quiz Question
William Coleman
Sat, 10 Oct 2015 15:17:23 +0000
New Sender Yuan-chia Joyce Koo
Re: Class III and Repairs
Yuan-chia Joyce Koo
Tue, 13 Oct 2015 19:18:11 -0400
Re: Element Quiz Question
Yuan-chia Joyce Koo
Thu, 22 Oct 2015 20:02:39 -0400
Re: Element Quiz Question
Yuan-chia Joyce Koo
Thu, 22 Oct 2015 22:29:14 -0400
Re: ENIG VS. ammonia
Yuan-chia Joyce Koo
Wed, 7 Oct 2015 20:35:16 -0400
Re: IPC-A-610
Yuan-chia Joyce Koo
Tue, 20 Oct 2015 18:09:12 -0400
Re: J-STD-001: Humidity control
Yuan-chia Joyce Koo
Wed, 28 Oct 2015 19:58:18 -0400
Re: Solder joint peel off from ENIG board
Yuan-chia Joyce Koo
Mon, 12 Oct 2015 08:26:09 -0400

ATOM RSS1 RSS2