TECHNET Archives

April 2013

TechNet@IPC.ORG
Options: Hide Table of Contents

2-part epoxy for pcb repair (6 Messages)
<No subject> (1 Message)
AW: [TN] NTC Friday Element Quiz Question (2 Messages)
AW: [TN] NTC Switzerland, viewed from Cyprus (7 Messages)
Axial Leaded Components (2 Messages)
Bakeout and PCB Separators (1 Message)
BGA Keep Out Zone, IPC Standard (2 Messages)
BGA pads (3 Messages)
Bivar Diss-O-Pads and closed-loop DI systems (7 Messages)
Butane Soldering Irons (31 Messages)
Butane Soldering Irons (NTC) (1 Message)
Cable, mechanical and coating defects (5 Messages)
Call For Participation - Reflow Oven Characterization Standard (1 Message)
ceramic pcb (1 Message)
Component marking (5 Messages)
Conductive epoxy to install SMT parts (17 Messages)
copper nanosolder (11 Messages)
copper nanosolder--fyi (19 Messages)
corrosion under Solder Mask (2 Messages)
Creating Head In Pillow Defects (19 Messages)
Differences between IPC-A-610E and J-STD-001E (1 Message)
Dropbox (24 Messages)
Flux classification question (5 Messages)
Gold Fingers for Edge Connectors - Design Criteria Needed (8 Messages)
IPC 610 requirement on End Overlap (J) (1 Message)
IPC-7095, BGA Keep Out Zone, IPC Standard (4 Messages)
need a high Tg, high Td, and no filler FR-4 (1 Message)
NTC (2 Messages)
NTC - Flux classification question (3 Messages)
NTC Friday Element Quiz Answer (11 Messages)
NTC Friday Element Quiz Question (88 Messages)
NTC Naugas (2 Messages)
NTC Switzerland, viewed from Cyprus (2 Messages)
NTC: Finally subscribed! (6 Messages)
NTC: Technet Google Map ?? (22 Messages)
Pakeout and PCB Separators (19 Messages)
Photo Gallery, Steve Zeva (2 Messages)
Pic of head-in-pillow for the site (8 Messages)
PICK AND PLACE ELECTRICAL TEST (5 Messages)
PWB / PCB Via Aspect Ratio (2 Messages)
QFN Pad Corrosion? (12 Messages)
Quick poll: When do your change Ion exchange beds? (8 Messages)
QuickFilter 16-pin VQFN (7 Messages)
Reliability Predictions (14 Messages)
Removing un-used via lands on internal layers - again- sorry (1 Message)
response to Gordon's statements on the validity of copper nanosolder (2 Messages)
Rigid Flex Rigid hybrid FR4 PWB (3 Messages)
Solder Stencil Interference due to Unintentional Via Fill (4 Messages)
solder which does ot scavenge gold (1 Message)
SSD/HDD Technology (2 Messages)
Static dissapative epoxy floor coating (3 Messages)
tamper proofing electronic assembly (6 Messages)
Test... (7 Messages)
Useful wave solderpot life when using leadfree solder (4 Messages)
Via in pad using filled or plugged vias (12 Messages)
Wire bond (1 Message)
[TN] copper nanosolder (2 Messages)
[TN] Victor's PTH picture... (2 Messages)

Subject Sorted by Subject, Chronologically

From

Date
New Thread 2-part epoxy for pcb repair
Re: 2-part epoxy for pcb repair
Stadem, Richard D.
Thu, 25 Apr 2013 12:28:31 +0000
Re: 2-part epoxy for pcb repair
Guy Ramsey
Thu, 25 Apr 2013 08:23:41 -0400
Re: 2-part epoxy for pcb repair
Mordechai Kirshenbaum
Wed, 24 Apr 2013 14:18:07 -0700
Re: 2-part epoxy for pcb repair
Steve Gregory
Wed, 24 Apr 2013 15:02:30 -0600
Re: 2-part epoxy for pcb repair
Sue Powers-Hartman
Wed, 24 Apr 2013 15:55:46 -0500
2-part epoxy for pcb repair
Steve Gregory
Wed, 24 Apr 2013 14:43:19 -0600
New Thread <No subject>
<No subject>
grandrien
Sun, 7 Apr 2013 10:57:02 +0200
New Thread AW: [TN] NTC Friday Element Quiz Question
Re: AW: [TN] NTC Friday Element Quiz Question
Joyce Koo
Fri, 12 Apr 2013 13:08:28 +0000
AW: [TN] NTC Friday Element Quiz Question
Torsten Hagge
Fri, 12 Apr 2013 13:01:58 +0000
New Thread AW: [TN] NTC Switzerland, viewed from Cyprus
Re: AW: [TN] NTC Switzerland, viewed from Cyprus
Ahne Oosterhof
Thu, 11 Apr 2013 20:16:01 -0700
Re: AW: [TN] NTC Switzerland, viewed from Cyprus
Brian Ellis
Thu, 11 Apr 2013 18:07:38 +0300
Re: AW: [TN] NTC Switzerland, viewed from Cyprus
Bob Landman
Thu, 11 Apr 2013 10:40:43 -0400
Re: AW: [TN] NTC Switzerland, viewed from Cyprus
Brian Ellis
Thu, 11 Apr 2013 15:57:39 +0300
Re: AW: [TN] NTC Switzerland, viewed from Cyprus
Brian Ellis
Tue, 9 Apr 2013 17:04:59 +0300
Re: AW: [TN] NTC Switzerland, viewed from Cyprus
Inge Hernefjord
Mon, 8 Apr 2013 18:15:18 +0200
AW: [TN] NTC Switzerland, viewed from Cyprus
Torsten Hagge
Mon, 8 Apr 2013 13:11:17 +0000
New Thread Axial Leaded Components
Re: Axial Leaded Components
greg
Mon, 8 Apr 2013 14:39:25 -0500
Axial Leaded Components
Victor Hernandez
Mon, 8 Apr 2013 13:36:26 -0500
New Thread Bakeout and PCB Separators
Re: Bakeout and PCB Separators
Robert Kondner
Tue, 9 Apr 2013 15:41:55 -0400
New Thread BGA Keep Out Zone, IPC Standard
Re: BGA Keep Out Zone, IPC Standard
David D. Hillman
Tue, 2 Apr 2013 14:14:47 -0500
BGA Keep Out Zone, IPC Standard
Victor Hernandez
Tue, 2 Apr 2013 13:23:18 -0500
New Thread BGA pads
Re: BGA pads
Vladimir Igoshev
Thu, 18 Apr 2013 13:15:27 +0000
Re: BGA pads
Paul Reid
Thu, 18 Apr 2013 08:31:21 -0400
BGA pads
Vladimir Igoshev
Wed, 17 Apr 2013 22:46:57 +0000
New Thread Bivar Diss-O-Pads and closed-loop DI systems
Re: Bivar Diss-O-Pads and closed-loop DI systems
Ed Popielarski
Tue, 30 Apr 2013 22:58:07 +0000
Re: Bivar Diss-O-Pads and closed-loop DI systems
Steve Gregory
Tue, 30 Apr 2013 15:14:19 -0600
Re: Bivar Diss-O-Pads and closed-loop DI systems
Stadem, Richard D.
Mon, 29 Apr 2013 20:27:54 +0000
Re: Bivar Diss-O-Pads and closed-loop DI systems
Glidden, Kevin
Mon, 29 Apr 2013 20:14:21 +0000
Re: Bivar Diss-O-Pads and closed-loop DI systems
Whittaker, Dewey (EHCOE)
Mon, 29 Apr 2013 19:48:53 +0000
Re: Bivar Diss-O-Pads and closed-loop DI systems
Nutting, Phil
Mon, 29 Apr 2013 19:30:00 +0000
Bivar Diss-O-Pads and closed-loop DI systems
Steve Gregory
Mon, 29 Apr 2013 12:56:18 -0600
New Thread Butane Soldering Irons
Re: Butane Soldering Irons
Bob Landman
Tue, 16 Apr 2013 22:13:50 -0400
Re: Butane Soldering Irons
Goodyear, Patrick
Tue, 16 Apr 2013 22:25:52 +0000
Re: Butane Soldering Irons
Goodyear, Patrick
Tue, 16 Apr 2013 22:20:01 +0000
Re: Butane Soldering Irons
Steven Creswick
Tue, 16 Apr 2013 16:59:14 -0400
Re: Butane Soldering Irons
Bob Landman
Tue, 16 Apr 2013 16:27:21 -0400
Re: Butane Soldering Irons
Steven Creswick
Tue, 16 Apr 2013 13:58:04 -0400
Re: Butane Soldering Irons
Whittaker, Dewey (EHCOE)
Tue, 16 Apr 2013 17:27:09 +0000
Re: Butane Soldering Irons
Joyce Koo
Tue, 16 Apr 2013 17:24:26 +0000
Re: Butane Soldering Irons
Goodyear, Patrick
Tue, 16 Apr 2013 15:28:07 +0000
Re: Butane Soldering Irons
Graham Collins
Mon, 8 Apr 2013 08:03:31 -0300
Re: Butane Soldering Irons
Blair Hogg
Sun, 7 Apr 2013 21:23:14 -0500
Re: Butane Soldering Irons
Mike Fenner
Fri, 5 Apr 2013 18:11:31 +0100
Re: Butane Soldering Irons
David D. Hillman
Fri, 5 Apr 2013 10:15:26 -0500
Re: Butane Soldering Irons
Inge Hernefjord
Fri, 5 Apr 2013 17:06:33 +0200
Re: Butane Soldering Irons
Blair Hogg
Fri, 5 Apr 2013 09:12:27 -0500
Re: Butane Soldering Irons
Robert F. Bagsby
Fri, 5 Apr 2013 08:20:11 -0500
Re: Butane Soldering Irons
David D. Hillman
Thu, 4 Apr 2013 18:01:26 -0500
Re: Butane Soldering Irons
Whittaker, Dewey (EHCOE)
Thu, 4 Apr 2013 21:10:20 +0000
Re: Butane Soldering Irons
Inge Hernefjord
Thu, 4 Apr 2013 22:45:38 +0200
Re: Butane Soldering Irons
Douglas Pauls
Thu, 4 Apr 2013 14:51:28 -0500
Re: Butane Soldering Irons
Inge Hernefjord
Thu, 4 Apr 2013 21:03:04 +0200
Re: Butane Soldering Irons
Gregg Owens
Thu, 4 Apr 2013 18:01:37 +0000
Re: Butane Soldering Irons
Stadem, Richard D.
Thu, 4 Apr 2013 17:17:52 +0000
Re: Butane Soldering Irons
Joyce Koo
Thu, 4 Apr 2013 15:39:30 +0000
Re: Butane Soldering Irons
Dennis Fritz
Thu, 4 Apr 2013 11:24:30 -0400
Re: Butane Soldering Irons
Joyce Koo
Thu, 4 Apr 2013 15:24:54 +0000
Re: Butane Soldering Irons
Ed Popielarski
Thu, 4 Apr 2013 14:59:19 +0000
Re: Butane Soldering Irons
Whittaker, Dewey (EHCOE)
Thu, 4 Apr 2013 14:59:07 +0000
Re: Butane Soldering Irons
Brian Ellis
Thu, 4 Apr 2013 17:57:15 +0300
Re: Butane Soldering Irons
Whittaker, Dewey (EHCOE)
Thu, 4 Apr 2013 14:49:44 +0000
Butane Soldering Irons
Gregg Owens
Thu, 4 Apr 2013 14:38:13 +0000
New Thread Butane Soldering Irons (NTC)
Re: Butane Soldering Irons (NTC)
Blair Hogg
Mon, 8 Apr 2013 12:30:44 -0500
New Thread Cable, mechanical and coating defects
Re: Cable, mechanical and coating defects
Bush, Brien
Fri, 19 Apr 2013 08:45:27 -0400
Re: Cable, mechanical and coating defects
Ed Popielarski
Thu, 18 Apr 2013 16:27:13 +0000
Re: Cable, mechanical and coating defects
Ioan Tempea
Thu, 18 Apr 2013 15:30:06 +0000
Re: Cable, mechanical and coating defects
Ed Popielarski
Thu, 18 Apr 2013 15:23:24 +0000
Cable, mechanical and coating defects
Ioan Tempea
Thu, 18 Apr 2013 12:08:04 +0000
New Thread Call For Participation - Reflow Oven Characterization Standard
Call For Participation - Reflow Oven Characterization Standard
Kris Roberson
Wed, 17 Apr 2013 22:24:30 +0000
New Thread ceramic pcb
ceramic pcb
Torsten Hagge
Wed, 10 Apr 2013 10:12:27 +0000
New Thread Component marking
Re: Component marking
Eva J
Thu, 25 Apr 2013 09:47:01 -0400
Re: Component marking
Inge Hernefjord
Thu, 25 Apr 2013 07:44:00 +0200
Re: Component marking
Inge Hernefjord
Wed, 24 Apr 2013 19:13:58 +0200
Re: Component marking
Ahne Oosterhof
Wed, 24 Apr 2013 09:39:06 -0700
Component marking
Jean-François Bissonnette
Wed, 24 Apr 2013 11:35:10 -0400
New Thread Conductive epoxy to install SMT parts
Re: Conductive epoxy to install SMT parts
Eva J
Tue, 30 Apr 2013 18:19:55 -0400
Re: Conductive epoxy to install SMT parts
Mike Fenner
Tue, 30 Apr 2013 22:07:03 +0100
Re: Conductive epoxy to install SMT parts
Guy Ramsey
Mon, 29 Apr 2013 13:42:48 -0400
Re: Conductive epoxy to install SMT parts
Eva J
Mon, 29 Apr 2013 13:32:01 -0400
Re: Conductive epoxy to install SMT parts
Guy Ramsey
Mon, 29 Apr 2013 13:13:20 -0400
Re: Conductive epoxy to install SMT parts
Eva J
Mon, 29 Apr 2013 13:09:50 -0400
Re: Conductive epoxy to install SMT parts
Steven Creswick
Mon, 29 Apr 2013 12:37:22 -0400
Re: Conductive epoxy to install SMT parts
Guy Ramsey
Mon, 29 Apr 2013 12:10:24 -0400
Re: Conductive epoxy to install SMT parts
Steven Creswick
Mon, 29 Apr 2013 09:22:19 -0400
Re: Conductive epoxy to install SMT parts
Steven Creswick
Mon, 29 Apr 2013 09:07:14 -0400
Re: Conductive epoxy to install SMT parts
Joyce Koo
Mon, 29 Apr 2013 13:06:52 +0000
Re: Conductive epoxy to install SMT parts
Eva J
Mon, 29 Apr 2013 08:58:48 -0400
Re: Conductive epoxy to install SMT parts
Joyce Koo
Mon, 29 Apr 2013 03:19:32 +0000
Re: Conductive epoxy to install SMT parts
Mike Fenner
Mon, 29 Apr 2013 00:41:17 +0100
Re: Conductive epoxy to install SMT parts
Steven Creswick
Thu, 25 Apr 2013 10:30:36 -0400
Re: Conductive epoxy to install SMT parts
Peter Swanson
Thu, 25 Apr 2013 14:24:10 +0000
Conductive epoxy to install SMT parts
Eva J
Thu, 25 Apr 2013 10:01:21 -0400
New Thread copper nanosolder
Re: copper nanosolder
Smith, Rick
Mon, 15 Apr 2013 20:44:41 +0000
Re: copper nanosolder
Ed Popielarski
Thu, 11 Apr 2013 17:54:57 +0000
Re: copper nanosolder
Stadem, Richard D.
Thu, 11 Apr 2013 14:17:30 +0000
Re: copper nanosolder
Whittaker, Dewey (EHCOE)
Thu, 11 Apr 2013 13:49:45 +0000
Re: copper nanosolder
Bob Landman
Thu, 11 Apr 2013 09:44:09 -0400
Re: copper nanosolder
Douglas Pauls
Thu, 11 Apr 2013 08:42:40 -0500
Re: copper nanosolder
Whittaker, Dewey (EHCOE)
Thu, 11 Apr 2013 13:29:07 +0000
Re: copper nanosolder
Mike Fenner
Thu, 11 Apr 2013 10:29:16 +0100
Re: copper nanosolder
Robert Kondner
Wed, 10 Apr 2013 16:07:17 -0400
Re: copper nanosolder
Vladimir Igoshev
Wed, 10 Apr 2013 16:39:30 +0000
Re: copper nanosolder
Bob Landman
Wed, 10 Apr 2013 12:19:55 -0400
New Thread copper nanosolder--fyi
Re: copper nanosolder--fyi
Mike Fenner
Fri, 19 Apr 2013 13:10:49 +0100
Re: copper nanosolder--fyi
Rex Waygood
Fri, 19 Apr 2013 11:35:30 +0100
Re: copper nanosolder--fyi
Joyce Koo
Mon, 8 Apr 2013 21:05:25 +0000
Re: copper nanosolder--fyi
Joyce Koo
Mon, 8 Apr 2013 21:04:25 +0000
Re: copper nanosolder--fyi
Bob Landman
Mon, 8 Apr 2013 17:03:17 -0400
Re: copper nanosolder--fyi
Stadem, Richard D.
Mon, 8 Apr 2013 20:54:54 +0000
Re: copper nanosolder--fyi
Whittaker, Dewey (EHCOE)
Mon, 8 Apr 2013 20:53:37 +0000
Re: copper nanosolder--fyi
Joyce Koo
Mon, 8 Apr 2013 20:46:18 +0000
Re: copper nanosolder--fyi
harvey
Mon, 8 Apr 2013 13:27:18 -0700
Re: copper nanosolder--fyi
Wayne Thayer
Mon, 8 Apr 2013 19:04:57 +0000
Re: copper nanosolder--fyi
Mike Buetow
Mon, 8 Apr 2013 14:45:33 -0400
Re: copper nanosolder--fyi
Wayne Thayer
Mon, 8 Apr 2013 18:04:44 +0000
Re: copper nanosolder--fyi
Joyce Koo
Mon, 8 Apr 2013 15:17:37 +0000
Re: copper nanosolder--fyi
Mike Fenner
Mon, 8 Apr 2013 15:08:59 +0100
Re: copper nanosolder--fyi
Joyce Koo
Mon, 8 Apr 2013 13:47:26 +0000
Re: copper nanosolder--fyi
Mike Fenner
Sun, 7 Apr 2013 19:48:28 +0100
Re: copper nanosolder--fyi
harvey
Sun, 7 Apr 2013 10:25:26 -0700
Re: copper nanosolder--fyi
Bev Christian
Sun, 7 Apr 2013 12:39:49 -0400
copper nanosolder--fyi
harvey
Sat, 6 Apr 2013 18:15:39 -0700
New Thread corrosion under Solder Mask
Re: corrosion under Solder Mask
SARAVANAN R
Wed, 17 Apr 2013 09:47:33 +0800
Re: corrosion under Solder Mask
Inge Hernefjord
Sun, 7 Apr 2013 17:51:20 +0200
New Thread Creating Head In Pillow Defects
Re: Creating Head In Pillow Defects
David Bealer
Tue, 30 Apr 2013 20:46:42 +0000
Re: Creating Head In Pillow Defects
Ed Popielarski
Tue, 30 Apr 2013 16:03:13 +0000
Re: Creating Head In Pillow Defects
Guy Ramsey
Tue, 30 Apr 2013 11:59:41 -0400
Re: Creating Head In Pillow Defects
Vladimir Igoshev
Tue, 30 Apr 2013 15:30:40 +0000
Re: Creating Head In Pillow Defects
Ed Popielarski
Tue, 30 Apr 2013 15:20:21 +0000
Re: Creating Head In Pillow Defects
Robert Kondner
Tue, 30 Apr 2013 11:18:57 -0400
Re: Creating Head In Pillow Defects
Victor Hernandez
Tue, 30 Apr 2013 10:15:36 -0500
Re: Creating Head In Pillow Defects
Ed Popielarski
Tue, 30 Apr 2013 15:09:53 +0000
Re: Creating Head In Pillow Defects
Vladimir Igoshev
Tue, 30 Apr 2013 15:08:58 +0000
Re: Creating Head In Pillow Defects
Ed Popielarski
Tue, 30 Apr 2013 15:00:29 +0000
Re: Creating Head In Pillow Defects
Steve Gregory
Tue, 30 Apr 2013 08:38:23 -0600
Re: Creating Head In Pillow Defects
Leland Woodall
Tue, 30 Apr 2013 14:32:34 +0000
Re: Creating Head In Pillow Defects
Whittaker, Dewey (EHCOE)
Tue, 30 Apr 2013 14:25:43 +0000
Re: Creating Head In Pillow Defects
Guy Ramsey
Tue, 30 Apr 2013 10:07:18 -0400
Re: Creating Head In Pillow Defects
Wayne Thayer
Tue, 30 Apr 2013 13:59:29 +0000
Re: Creating Head In Pillow Defects
Reuven Rokah
Tue, 30 Apr 2013 16:56:59 +0300
Re: Creating Head In Pillow Defects
Jerry Dengler
Tue, 30 Apr 2013 10:01:11 -0400
Re: Creating Head In Pillow Defects
Steve Gregory
Tue, 30 Apr 2013 07:55:55 -0600
Creating Head In Pillow Defects
Leland Woodall
Tue, 30 Apr 2013 13:44:53 +0000
New Thread Differences between IPC-A-610E and J-STD-001E
Differences between IPC-A-610E and J-STD-001E
SUBSCRIBE TechNet Marc Eccles
Mon, 15 Apr 2013 09:38:21 -0500
New Thread Dropbox
Re: Dropbox
Bill Noel
Thu, 4 Apr 2013 06:05:55 -0400
Re: Dropbox
[log in to unmask]
Wed, 3 Apr 2013 20:09:12 +0000
Re: Dropbox
Inge Hernefjord
Wed, 3 Apr 2013 21:57:56 +0200
Re: Dropbox
Ed Popielarski
Wed, 3 Apr 2013 19:49:14 +0000
Re: Dropbox
Joyce Koo
Wed, 3 Apr 2013 19:41:47 +0000
Re: Dropbox
Stadem, Richard D.
Wed, 3 Apr 2013 19:27:41 +0000
Re: Dropbox
Whittaker, Dewey (EHCOE)
Wed, 3 Apr 2013 19:20:26 +0000
Dropbox
Inge Hernefjord
Wed, 3 Apr 2013 21:16:16 +0200
Dropbox
Inge Hernefjord
Wed, 3 Apr 2013 19:44:47 +0200
Re: Dropbox
Mike Fenner
Wed, 3 Apr 2013 17:55:21 +0100
Re: Dropbox
Joyce Koo
Wed, 3 Apr 2013 15:32:55 +0000
Re: Dropbox
Gregg Owens
Wed, 3 Apr 2013 15:27:33 +0000
Re: Dropbox
Bill Noel
Wed, 3 Apr 2013 10:37:07 -0400
Re: Dropbox
Steven Creswick
Wed, 3 Apr 2013 10:10:25 -0400
Re: Dropbox
Glidden, Kevin
Wed, 3 Apr 2013 14:01:01 +0000
Re: Dropbox
Steven Creswick
Wed, 3 Apr 2013 08:55:59 -0400
Re: Dropbox
Douglas Pauls
Wed, 3 Apr 2013 07:39:20 -0500
Re: Dropbox
Wayne Thayer
Tue, 2 Apr 2013 23:52:20 +0000
Re: Dropbox
Joyce Koo
Tue, 2 Apr 2013 23:49:11 +0000
Re: Dropbox
Bev Christian
Tue, 2 Apr 2013 19:44:56 -0400
Re: Dropbox
Inge Hernefjord
Wed, 3 Apr 2013 01:25:12 +0200
Re: Dropbox
Steven Creswick
Tue, 2 Apr 2013 19:13:21 -0400
Re: Dropbox
Mike Fenner
Wed, 3 Apr 2013 00:02:46 +0100
Dropbox
Inge Hernefjord
Wed, 3 Apr 2013 00:44:45 +0200
New Thread Flux classification question
Re: Flux classification question
Whittaker, Dewey (EHCOE)
Tue, 30 Apr 2013 17:50:48 +0000
Re: Flux classification question
Mike Fenner
Tue, 30 Apr 2013 17:45:17 +0100
Re: Flux classification question
Wenger, George M. [Contractor]
Tue, 30 Apr 2013 08:32:47 -0500
Re: Flux classification question
Subscribe TechNet Tom Granat
Tue, 30 Apr 2013 08:32:11 -0500
Flux classification question
Graham Collins
Tue, 30 Apr 2013 10:12:49 -0300
New Thread Gold Fingers for Edge Connectors - Design Criteria Needed
Re: Gold Fingers for Edge Connectors - Design Criteria Needed
Smith, Rick
Fri, 26 Apr 2013 12:21:36 +0000
Re: Gold Fingers for Edge Connectors - Design Criteria Needed
Brian Ellis
Fri, 26 Apr 2013 09:37:14 +0300
Re: Gold Fingers for Edge Connectors - Design Criteria Needed
Giamis, Andy
Thu, 25 Apr 2013 20:32:29 -0500
Re: Gold Fingers for Edge Connectors - Design Criteria Needed
Joyce Koo
Fri, 26 Apr 2013 01:32:00 +0000
Re: Gold Fingers for Edge Connectors - Design Criteria Needed
Giamis, Andy
Thu, 25 Apr 2013 20:28:44 -0500
Re: Gold Fingers for Edge Connectors - Design Criteria Needed
Don Vischulis
Thu, 25 Apr 2013 20:17:30 -0500
Re: Gold Fingers for Edge Connectors - Design Criteria Needed
Robert F. Bagsby
Thu, 25 Apr 2013 11:46:59 -0500
Gold Fingers for Edge Connectors - Design Criteria Needed
MacFadden, Todd
Thu, 25 Apr 2013 16:34:58 +0000
New Thread IPC 610 requirement on End Overlap (J)
IPC 610 requirement on End Overlap (J)
Tan Geok Ang
Wed, 10 Apr 2013 09:54:30 +0000
New Thread IPC-7095, BGA Keep Out Zone, IPC Standard
Re: IPC-7095, BGA Keep Out Zone, IPC Standard
Victor Hernandez
Thu, 4 Apr 2013 14:52:55 -0500
Re: IPC-7095, BGA Keep Out Zone, IPC Standard
Smith, Rick
Thu, 4 Apr 2013 19:41:54 +0000
Re: IPC-7095, BGA Keep Out Zone, IPC Standard
David D. Hillman
Wed, 3 Apr 2013 07:23:12 -0500
IPC-7095, BGA Keep Out Zone, IPC Standard
Victor Hernandez
Wed, 3 Apr 2013 06:26:32 -0500
New Thread need a high Tg, high Td, and no filler FR-4
need a high Tg, high Td, and no filler FR-4
Anil Kher
Tue, 2 Apr 2013 14:40:04 +0530
New Thread NTC
Re: NTC
Joyce Koo
Wed, 10 Apr 2013 20:15:17 +0000
NTC
Inge Hernefjord
Wed, 10 Apr 2013 22:02:19 +0200
New Thread NTC - Flux classification question
Re: NTC - Flux classification question
Whittaker, Dewey (EHCOE)
Tue, 30 Apr 2013 18:25:46 +0000
Re: NTC - Flux classification question
Nutting, Phil
Tue, 30 Apr 2013 18:05:01 +0000
Re: NTC - Flux classification question
Graham Collins
Tue, 30 Apr 2013 14:57:19 -0300
New Thread NTC Friday Element Quiz Answer
Re: NTC Friday Element Quiz Answer
David D. Hillman
Sun, 28 Apr 2013 22:14:21 -0500
Re: NTC Friday Element Quiz Answer
Matthias Mansfeld
Sat, 27 Apr 2013 10:52:15 +0200
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 26 Apr 2013 20:47:20 -0500
Re: NTC Friday Element Quiz Answer
Keith Calhoun
Mon, 22 Apr 2013 06:47:58 -0400
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 19 Apr 2013 14:10:36 -0500
Re: NTC Friday Element Quiz Answer
Leland Woodall
Tue, 16 Apr 2013 16:50:11 +0000
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 12 Apr 2013 16:45:04 -0500
Re: NTC Friday Element Quiz Answer
James Head
Fri, 12 Apr 2013 11:10:39 +0100
Re: NTC Friday Element Quiz Answer
Douglas Pauls
Fri, 5 Apr 2013 16:07:10 -0500
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 5 Apr 2013 15:55:48 -0500
Re: NTC Friday Element Quiz Answer
David D. Hillman
Mon, 1 Apr 2013 07:54:09 -0500
New Thread NTC Friday Element Quiz Question
Re: NTC Friday Element Quiz Question
Blair Hogg
Fri, 26 Apr 2013 15:07:24 -0500
Re: NTC Friday Element Quiz Question
Blair Hogg
Fri, 26 Apr 2013 15:05:22 -0500
Re: NTC Friday Element Quiz Question
Graham Naisbitt
Fri, 26 Apr 2013 14:42:10 +0100
Re: NTC Friday Element Quiz Question
Robert Kondner
Fri, 26 Apr 2013 09:08:04 -0400
Re: NTC Friday Element Quiz Question
Robert F. Bagsby
Fri, 26 Apr 2013 07:59:18 -0500
Re: NTC Friday Element Quiz Question
Mordechai Kirshenbaum
Fri, 26 Apr 2013 02:22:15 -0700
Re: NTC Friday Element Quiz Question
Steven Creswick
Fri, 26 Apr 2013 05:18:41 -0400
Re: NTC Friday Element Quiz Question
Brian Ellis
Fri, 26 Apr 2013 09:31:39 +0300
Re: NTC Friday Element Quiz Question
<>
Thu, 25 Apr 2013 21:18:41 -0700
Re: NTC Friday Element Quiz Question
Dennis Fritz
Fri, 26 Apr 2013 00:01:31 -0400
Re: NTC Friday Element Quiz Question
Matthias Mansfeld
Fri, 26 Apr 2013 05:19:26 +0200
NTC Friday Element Quiz Question
David D. Hillman
Thu, 25 Apr 2013 21:26:43 -0500
Re: NTC Friday Element Quiz Question
Douglas Pauls
Tue, 23 Apr 2013 15:19:41 -0500
Re: NTC Friday Element Quiz Question
Goodyear, Patrick
Tue, 23 Apr 2013 20:05:41 +0000
Re: NTC Friday Element Quiz Question
Goodyear, Patrick
Tue, 23 Apr 2013 20:03:53 +0000
Re: NTC Friday Element Quiz Question
David D. Hillman
Tue, 23 Apr 2013 13:08:02 -0500
Re: NTC Friday Element Quiz Question
Graham Naisbitt
Tue, 23 Apr 2013 18:46:00 +0100
Re: NTC Friday Element Quiz Question
Mike Fenner
Tue, 23 Apr 2013 18:42:12 +0100
Re: NTC Friday Element Quiz Question
Joyce Koo
Tue, 23 Apr 2013 16:17:51 +0000
Re: NTC Friday Element Quiz Question
Ahne Oosterhof
Tue, 23 Apr 2013 09:10:37 -0700
Re: NTC Friday Element Quiz Question
Douglas Pauls
Tue, 23 Apr 2013 10:31:14 -0500
Re: NTC Friday Element Quiz Question
Stadem, Richard D.
Tue, 23 Apr 2013 15:24:34 +0000
Re: NTC Friday Element Quiz Question
Phil Bavaro
Tue, 23 Apr 2013 15:17:07 +0000
Re: NTC Friday Element Quiz Question
Goodyear, Patrick
Tue, 23 Apr 2013 15:09:33 +0000
Re: NTC Friday Element Quiz Question
Stadem, Richard D.
Tue, 23 Apr 2013 14:59:17 +0000
Re: NTC Friday Element Quiz Question
Goodyear, Patrick
Tue, 23 Apr 2013 14:26:41 +0000
Re: NTC Friday Element Quiz Question
Douglas Pauls
Tue, 23 Apr 2013 08:55:45 -0500
Re: NTC Friday Element Quiz Question
Victor Hernandez
Tue, 23 Apr 2013 08:41:05 -0500
Re: NTC Friday Element Quiz Question
Subscribe TechNet Tom Granat
Tue, 23 Apr 2013 08:32:28 -0500
Re: NTC Friday Element Quiz Question
Joyce Koo
Tue, 23 Apr 2013 13:25:31 +0000
Re: NTC Friday Element Quiz Question
David D. Hillman
Tue, 23 Apr 2013 08:23:03 -0500
Re: NTC Friday Element Quiz Question
Douglas Pauls
Tue, 23 Apr 2013 08:22:59 -0500
Re: NTC Friday Element Quiz Question
Drew meyer
Tue, 23 Apr 2013 08:21:18 -0500
Re: NTC Friday Element Quiz Question
Douglas Pauls
Tue, 23 Apr 2013 08:22:18 -0500
Re: NTC Friday Element Quiz Question
Joyce Koo
Tue, 23 Apr 2013 13:19:53 +0000
Re: NTC Friday Element Quiz Question
David D. Hillman
Tue, 23 Apr 2013 08:17:28 -0500
Re: NTC Friday Element Quiz Question
Joyce Koo
Tue, 23 Apr 2013 13:13:04 +0000
Re: NTC Friday Element Quiz Question
Douglas Pauls
Tue, 23 Apr 2013 08:10:59 -0500
Re: NTC Friday Element Quiz Question
Joyce Koo
Tue, 23 Apr 2013 13:07:09 +0000
Re: NTC Friday Element Quiz Question
Douglas Pauls
Tue, 23 Apr 2013 07:50:52 -0500
Re: NTC Friday Element Quiz Question
Goodyear, Patrick
Mon, 22 Apr 2013 23:47:11 +0000
Re: NTC Friday Element Quiz Question
Mike Fenner
Mon, 22 Apr 2013 15:26:56 +0100
Re: NTC Friday Element Quiz Question
Douglas Pauls
Mon, 22 Apr 2013 07:06:56 -0500
Re: NTC Friday Element Quiz Question
David D. Hillman
Fri, 19 Apr 2013 21:00:27 -0500
Re: NTC Friday Element Quiz Question
Bev Christian
Fri, 19 Apr 2013 19:02:34 -0400
Re: NTC Friday Element Quiz Question
Davis, Larry
Fri, 19 Apr 2013 15:57:26 +0000
Re: NTC Friday Element Quiz Question
Don Vischulis
Fri, 19 Apr 2013 11:34:18 -0400
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 19 Apr 2013 10:06:26 -0500
Re: NTC Friday Element Quiz Question
David Bealer
Fri, 19 Apr 2013 15:02:56 +0000
Re: NTC Friday Element Quiz Question
Drew meyer
Fri, 19 Apr 2013 09:45:39 -0500
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 19 Apr 2013 08:44:32 -0500
Re: NTC Friday Element Quiz Question
Davis, Larry
Fri, 19 Apr 2013 13:38:51 +0000
Re: NTC Friday Element Quiz Question
Fox, Ian
Fri, 19 Apr 2013 13:26:52 +0000
Re: NTC Friday Element Quiz Question
Richard D. Krug
Fri, 19 Apr 2013 09:18:01 -0400
Re: NTC Friday Element Quiz Question
Robert F. Bagsby
Fri, 19 Apr 2013 08:18:06 -0500
Re: NTC Friday Element Quiz Question
Larry Dzaugis
Fri, 19 Apr 2013 08:17:13 -0500
Re: NTC Friday Element Quiz Question
Carroll, Thomas A
Fri, 19 Apr 2013 13:15:28 +0000
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 19 Apr 2013 08:14:11 -0500
Re: NTC Friday Element Quiz Question
jrusseau.precisionanalysts.com
Fri, 19 Apr 2013 09:07:22 -0400
Re: NTC Friday Element Quiz Question
Keith Calhoun
Fri, 19 Apr 2013 08:51:02 -0400
NTC Friday Element Quiz Question
David D. Hillman
Fri, 19 Apr 2013 07:38:55 -0500
Re: NTC Friday Element Quiz Question
Robert F. Bagsby
Fri, 12 Apr 2013 14:30:43 -0500
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 12 Apr 2013 13:54:59 -0500
Re: NTC Friday Element Quiz Question
Graham Naisbitt
Fri, 12 Apr 2013 14:46:54 +0100
Re: NTC Friday Element Quiz Question
Paul Reid
Fri, 12 Apr 2013 09:42:00 -0400
Re: NTC Friday Element Quiz Question
jrusseau.precisionanalysts.com
Fri, 12 Apr 2013 09:39:44 -0400
Re: NTC Friday Element Quiz Question
Leland Woodall
Fri, 12 Apr 2013 13:38:22 +0000
Re: NTC Friday Element Quiz Question
greg
Fri, 12 Apr 2013 08:32:54 -0500
NTC Friday Element Quiz Question
David D. Hillman
Fri, 12 Apr 2013 07:47:08 -0500
Re: NTC Friday Element Quiz Question
Bev Christian
Fri, 5 Apr 2013 20:09:31 -0400
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 5 Apr 2013 15:13:48 -0500
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 5 Apr 2013 14:57:39 -0500
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 5 Apr 2013 13:59:07 -0500
Re: NTC Friday Element Quiz Question
Graham Collins
Fri, 5 Apr 2013 15:23:57 -0300
Re: NTC Friday Element Quiz Question
Steve Smith
Fri, 5 Apr 2013 18:21:59 +0000
Re: NTC Friday Element Quiz Question
David D. Hillman
Fri, 5 Apr 2013 13:18:53 -0500
Re: NTC Friday Element Quiz Question
Robert Wolfe
Fri, 5 Apr 2013 14:16:20 -0400
Re: NTC Friday Element Quiz Question
Graham Collins
Fri, 5 Apr 2013 15:00:33 -0300
Re: NTC Friday Element Quiz Question
Guy Ramsey
Fri, 5 Apr 2013 13:15:18 -0400
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 5 Apr 2013 11:47:58 -0500
Re: NTC Friday Element Quiz Question
Larry Dzaugis
Fri, 5 Apr 2013 08:44:17 -0500
Re: NTC Friday Element Quiz Question
Sue Knight
Fri, 5 Apr 2013 14:38:06 +0100
Re: NTC Friday Element Quiz Question
Robert F. Bagsby
Fri, 5 Apr 2013 08:22:19 -0500
Re: NTC Friday Element Quiz Question
Richard D. Krug
Fri, 5 Apr 2013 09:00:09 -0400
Re: NTC Friday Element Quiz Question
Leland Woodall
Fri, 5 Apr 2013 12:18:14 +0000
Re: NTC Friday Element Quiz Question
Steven Creswick
Fri, 5 Apr 2013 08:17:08 -0400
Re: NTC Friday Element Quiz Question
James Head
Fri, 5 Apr 2013 13:12:37 +0100
NTC Friday Element Quiz Question
David D. Hillman
Fri, 5 Apr 2013 07:06:22 -0500
New Thread NTC Naugas
Re: NTC Naugas
Whittaker, Dewey (EHCOE)
Mon, 15 Apr 2013 21:23:59 +0000
Re: NTC Naugas
David D. Hillman
Mon, 15 Apr 2013 15:58:24 -0500
New Thread NTC Switzerland, viewed from Cyprus
Re: NTC Switzerland, viewed from Cyprus
Victor Hernandez
Mon, 8 Apr 2013 07:59:46 -0500
NTC Switzerland, viewed from Cyprus
Brian Ellis
Mon, 8 Apr 2013 15:55:52 +0300
New Thread NTC: Finally subscribed!
Re: NTC: Finally subscribed!
Inge Hernefjord
Wed, 10 Apr 2013 22:25:24 +0200
Re: NTC: Finally subscribed!
Mike Fenner
Wed, 10 Apr 2013 20:26:09 +0100
Re: NTC: Finally subscribed!
Ahne Oosterhof
Wed, 10 Apr 2013 09:10:07 -0700
Re: NTC: Finally subscribed!
Victor Hernandez
Wed, 10 Apr 2013 10:59:13 -0500
Re: NTC: Finally subscribed!
Stadem, Richard D.
Wed, 10 Apr 2013 15:40:14 +0000
NTC: Finally subscribed!
Steve Gregory
Wed, 10 Apr 2013 08:49:58 -0600
New Thread NTC: Technet Google Map ??
Re: NTC: Technet Google Map ??
Ed Popielarski
Mon, 8 Apr 2013 16:35:54 +0000
Re: NTC: Technet Google Map ??
Whittaker, Dewey (EHCOE)
Mon, 8 Apr 2013 16:27:59 +0000
Re: NTC: Technet Google Map ??
Ed Popielarski
Mon, 8 Apr 2013 16:14:10 +0000
Re: NTC: Technet Google Map ??
Glidden, Kevin
Mon, 8 Apr 2013 15:10:49 +0000
Re: NTC: Technet Google Map ??
Brian Ellis
Sat, 6 Apr 2013 18:39:38 +0300
Re: NTC: Technet Google Map ??
Larry Dzaugis
Sat, 6 Apr 2013 08:35:02 -0500
Re: NTC: Technet Google Map ??
Joyce Koo
Sat, 6 Apr 2013 11:58:06 +0000
Re: NTC: Technet Google Map ??
Brian Ellis
Sat, 6 Apr 2013 13:57:22 +0300
Re: NTC: Technet Google Map ??
Bev Christian
Fri, 5 Apr 2013 20:32:56 -0400
Re: NTC: Technet Google Map ??
Ahne Oosterhof
Fri, 5 Apr 2013 14:04:44 -0700
Re: NTC: Technet Google Map ??
Glidden, Kevin
Fri, 5 Apr 2013 18:44:36 +0000
Re: NTC: Technet Google Map ??
Whittaker, Dewey (EHCOE)
Fri, 5 Apr 2013 17:05:02 +0000
Re: NTC: Technet Google Map ??
Joyce Koo
Fri, 5 Apr 2013 16:58:36 +0000
Re: NTC: Technet Google Map ??
David D. Hillman
Fri, 5 Apr 2013 11:52:16 -0500
Re: NTC: Technet Google Map ??
Douglas Pauls
Fri, 5 Apr 2013 11:48:37 -0500
Re: NTC: Technet Google Map ??
Whittaker, Dewey (EHCOE)
Fri, 5 Apr 2013 16:28:17 +0000
Re: NTC: Technet Google Map ??
Pete
Fri, 5 Apr 2013 11:14:09 -0500
Re: NTC: Technet Google Map ??
Douglas Pauls
Fri, 5 Apr 2013 06:55:40 -0500
Re: NTC: Technet Google Map ??
Graham Collins
Fri, 5 Apr 2013 07:52:50 -0300
Re: NTC: Technet Google Map ??
Bob Landman
Thu, 4 Apr 2013 17:55:23 -0400
Re: NTC: Technet Google Map ??
Joyce Koo
Thu, 4 Apr 2013 21:47:30 +0000
NTC: Technet Google Map ??
Glidden, Kevin
Thu, 4 Apr 2013 21:42:46 +0000
New Thread Pakeout and PCB Separators
Re: Pakeout and PCB Separators
Whittaker, Dewey (EHCOE)
Mon, 15 Apr 2013 18:41:49 +0000
Re: Pakeout and PCB Separators
Robert Kondner
Mon, 15 Apr 2013 14:31:53 -0400
Re: Pakeout and PCB Separators
Stadem, Richard D.
Mon, 15 Apr 2013 17:58:28 +0000
Re: Pakeout and PCB Separators
Ahne Oosterhof
Mon, 15 Apr 2013 10:51:25 -0700
Re: Pakeout and PCB Separators
Joyce Koo
Mon, 15 Apr 2013 16:43:11 +0000
Re: Pakeout and PCB Separators
Robert Kondner
Mon, 15 Apr 2013 12:40:42 -0400
Re: Pakeout and PCB Separators
Ahne Oosterhof
Mon, 15 Apr 2013 09:27:02 -0700
Re: Pakeout and PCB Separators
Robert Kondner
Mon, 15 Apr 2013 11:30:44 -0400
Re: Pakeout and PCB Separators
Joyce Koo
Sun, 14 Apr 2013 20:26:37 +0000
Re: Pakeout and PCB Separators
Inge Hernefjord
Sun, 14 Apr 2013 20:42:42 +0200
Re: Pakeout and PCB Separators
Robert Kondner
Wed, 10 Apr 2013 10:54:09 -0400
Re: Pakeout and PCB Separators
Steven Creswick
Tue, 9 Apr 2013 19:48:55 -0400
Re: Pakeout and PCB Separators
Robert Kondner
Tue, 9 Apr 2013 18:29:37 -0400
Re: Pakeout and PCB Separators
Stadem, Richard D.
Tue, 9 Apr 2013 18:14:05 +0000
Re: Pakeout and PCB Separators
Stadem, Richard D.
Tue, 9 Apr 2013 18:13:06 +0000
Re: Pakeout and PCB Separators
Reuven Rokah
Tue, 9 Apr 2013 21:11:59 +0300
Re: Pakeout and PCB Separators
Glidden, Kevin
Tue, 9 Apr 2013 18:00:58 +0000
Re: Pakeout and PCB Separators
Nutting, Phil
Tue, 9 Apr 2013 17:00:33 +0000
Pakeout and PCB Separators
Robert Kondner
Tue, 9 Apr 2013 12:53:31 -0400
New Thread Photo Gallery, Steve Zeva
Re: Photo Gallery, Steve Zeva
Jack Olson
Tue, 9 Apr 2013 08:48:37 -0500
Re: Photo Gallery, Steve Zeva
Steve Gregory
Mon, 8 Apr 2013 20:29:29 -0600
New Thread Pic of head-in-pillow for the site
Re: Pic of head-in-pillow for the site
Wenger, George M. [Contractor]
Tue, 30 Apr 2013 20:17:02 -0500
Re: Pic of head-in-pillow for the site
David D. Hillman
Tue, 30 Apr 2013 16:10:27 -0500
Re: Pic of head-in-pillow for the site
Steve Gregory
Tue, 30 Apr 2013 15:08:10 -0600
Re: Pic of head-in-pillow for the site
Leland Woodall
Tue, 30 Apr 2013 17:40:36 +0000
Re: Pic of head-in-pillow for the site
Steve Gregory
Tue, 30 Apr 2013 10:25:19 -0600
Re: Pic of head-in-pillow for the site
Rex Waygood
Tue, 30 Apr 2013 17:13:46 +0100
Re: Pic of head-in-pillow for the site
Ed Popielarski
Tue, 30 Apr 2013 16:04:41 +0000
Re: Pic of head-in-pillow for the site
Steve Gregory
Tue, 30 Apr 2013 09:55:22 -0600
New Thread PICK AND PLACE ELECTRICAL TEST
Re: PICK AND PLACE ELECTRICAL TEST
Bass, Mark
Wed, 17 Apr 2013 09:14:00 +0000
Re: PICK AND PLACE ELECTRICAL TEST
Robert Kondner
Tue, 16 Apr 2013 11:13:30 -0400
Re: PICK AND PLACE ELECTRICAL TEST
Bush, Brien
Tue, 16 Apr 2013 09:03:19 -0400
Re: PICK AND PLACE ELECTRICAL TEST
Graham Collins
Tue, 16 Apr 2013 09:06:11 -0300
PICK AND PLACE ELECTRICAL TEST
Bass, Mark
Tue, 16 Apr 2013 11:37:55 +0000
New Thread PWB / PCB Via Aspect Ratio
Re: PWB / PCB Via Aspect Ratio
Smith, Rick
Thu, 25 Apr 2013 12:07:32 +0000
PWB / PCB Via Aspect Ratio
Victor Hernandez
Fri, 19 Apr 2013 10:53:57 -0500
New Thread QFN Pad Corrosion?
Re: QFN Pad Corrosion?
Wayne Thayer
Tue, 23 Apr 2013 21:50:54 +0000
Re: QFN Pad Corrosion?
Goodyear, Patrick
Tue, 23 Apr 2013 21:12:53 +0000
Re: QFN Pad Corrosion?
David D. Hillman
Tue, 23 Apr 2013 15:31:18 -0500
Re: QFN Pad Corrosion?
Wenger, George M. [Contractor]
Tue, 23 Apr 2013 15:27:05 -0500
Re: QFN Pad Corrosion?
Wayne Thayer
Tue, 23 Apr 2013 18:52:03 +0000
Re: QFN Pad Corrosion?
Guy Ramsey
Tue, 23 Apr 2013 14:48:50 -0400
Re: QFN Pad Corrosion?
Robert Kondner
Tue, 23 Apr 2013 13:56:57 -0400
Re: QFN Pad Corrosion?
Victor Hernandez
Tue, 23 Apr 2013 12:45:08 -0500
Re: QFN Pad Corrosion?
Phil Bavaro
Tue, 23 Apr 2013 17:41:51 +0000
Re: QFN Pad Corrosion?
Steve Gregory
Tue, 23 Apr 2013 11:40:31 -0600
Re: QFN Pad Corrosion?
Reuven Rokah
Tue, 23 Apr 2013 20:37:11 +0300
QFN Pad Corrosion?
Steve Gregory
Tue, 23 Apr 2013 11:12:24 -0600
New Thread Quick poll: When do your change Ion exchange beds?
Re: Quick poll: When do your change Ion exchange beds?
Brian Ellis
Fri, 26 Apr 2013 09:27:40 +0300
Re: Quick poll: When do your change Ion exchange beds?
Smith, Rick
Thu, 25 Apr 2013 20:25:38 +0000
Re: Quick poll: When do your change Ion exchange beds?
Guy Ramsey
Thu, 25 Apr 2013 14:44:05 -0400
Re: Quick poll: When do your change Ion exchange beds?
David Bealer
Thu, 25 Apr 2013 18:07:55 +0000
Re: Quick poll: When do your change Ion exchange beds?
Stadem, Richard D.
Thu, 25 Apr 2013 18:02:08 +0000
Re: Quick poll: When do your change Ion exchange beds?
Phil Bavaro
Thu, 25 Apr 2013 17:37:00 +0000
Re: Quick poll: When do your change Ion exchange beds?
Davis, Larry
Thu, 25 Apr 2013 16:50:59 +0000
Quick poll: When do your change Ion exchange beds?
Steve Gregory
Thu, 25 Apr 2013 10:42:49 -0600
New Thread QuickFilter 16-pin VQFN
Re: QuickFilter 16-pin VQFN
Rex Waygood
Mon, 22 Apr 2013 10:20:28 +0100
Re: QuickFilter 16-pin VQFN
Inge Hernefjord
Fri, 19 Apr 2013 19:13:21 +0200
Re: QuickFilter 16-pin VQFN
Steve Gregory
Fri, 19 Apr 2013 10:15:58 -0600
Re: QuickFilter 16-pin VQFN
David D. Hillman
Fri, 19 Apr 2013 10:51:45 -0500
Re: QuickFilter 16-pin VQFN
Gumpert, Ben
Fri, 19 Apr 2013 15:38:44 +0000
Re: QuickFilter 16-pin VQFN
Joyce Koo
Fri, 19 Apr 2013 15:21:32 +0000
QuickFilter 16-pin VQFN
Steve Gregory
Fri, 19 Apr 2013 09:08:52 -0600
New Thread Reliability Predictions
Re: Reliability Predictions
Reuven Rokah
Wed, 17 Apr 2013 13:12:18 +0300
Re: Reliability Predictions
Joyce Koo
Wed, 17 Apr 2013 09:49:06 +0000
Re: Reliability Predictions
Reuven Rokah
Wed, 17 Apr 2013 10:24:09 +0300
Re: Reliability Predictions
Per-Erik Tegehall
Wed, 17 Apr 2013 06:36:54 +0000
Re: Reliability Predictions
Blair Hogg
Tue, 16 Apr 2013 08:10:19 -0500
Re: Reliability Predictions
Honsowetz, Eric
Mon, 15 Apr 2013 17:15:48 -0400
Re: Reliability Predictions
Louis Hart
Fri, 12 Apr 2013 20:40:07 +0000
Re: Reliability Predictions
Ahne Oosterhof
Fri, 12 Apr 2013 11:40:21 -0700
Re: Reliability Predictions
Ed Popielarski
Fri, 12 Apr 2013 18:23:29 +0000
Re: Reliability Predictions
Robert Kondner
Fri, 12 Apr 2013 13:51:14 -0400
Re: Reliability Predictions
Ahne Oosterhof
Fri, 12 Apr 2013 09:57:50 -0700
Re: Reliability Predictions
Robert Kondner
Fri, 12 Apr 2013 11:42:49 -0400
Re: Reliability Predictions
Ahne Oosterhof
Thu, 11 Apr 2013 20:26:13 -0700
Reliability Predictions
Blair Hogg
Mon, 8 Apr 2013 15:10:17 -0500
New Thread Removing un-used via lands on internal layers - again- sorry
Removing un-used via lands on internal layers - again- sorry
Dick Hatano
Tue, 16 Apr 2013 16:45:19 +0000
New Thread response to Gordon's statements on the validity of copper nanosolder
Re: Fw: response to Gordon's statements on the validity of copper nanosolder
Joyce Koo
Thu, 11 Apr 2013 01:53:42 +0000
Fw: response to Gordon's statements on the validity of copper nanosolder
harvey
Wed, 10 Apr 2013 11:16:50 -0700
New Thread Rigid Flex Rigid hybrid FR4 PWB
Re: Rigid Flex Rigid hybrid FR4 PWB
Wayne Thayer
Tue, 23 Apr 2013 18:54:20 +0000
Re: Rigid Flex Rigid hybrid FR4 PWB
Lehmicke, Michael
Tue, 23 Apr 2013 13:48:48 -0500
Rigid Flex Rigid hybrid FR4 PWB
Victor Hernandez
Tue, 23 Apr 2013 13:42:51 -0500
New Thread Solder Stencil Interference due to Unintentional Via Fill
Re: Solder Stencil Interference due to Unintentional Via Fill
MacFadden, Todd
Mon, 8 Apr 2013 14:12:17 +0000
Re: Solder Stencil Interference due to Unintentional Via Fill
grandrien
Sun, 7 Apr 2013 11:00:46 +0200
Re: Solder Stencil Interference due to Unintentional Via Fill
Gerry Gagnon
Thu, 4 Apr 2013 13:08:08 -0400
Solder Stencil Interference due to Unintentional Via Fill
MacFadden, Todd
Thu, 4 Apr 2013 15:55:59 +0000
New Thread solder which does ot scavenge gold
Re: solder which does ot scavenge gold
Steven Creswick
Mon, 1 Apr 2013 10:30:47 -0400
New Thread SSD/HDD Technology
Re: SSD/HDD Technology
<>
Fri, 5 Apr 2013 10:11:44 -0700
SSD/HDD Technology
Victor Hernandez
Fri, 5 Apr 2013 11:00:58 -0500
New Thread Static dissapative epoxy floor coating
Re: Static dissapative epoxy floor coating
Guy Ramsey
Fri, 12 Apr 2013 12:25:41 -0400
Re: Static dissapative epoxy floor coating
Ed Popielarski
Thu, 11 Apr 2013 17:58:27 +0000
Static dissapative epoxy floor coating
Steve Gregory
Thu, 11 Apr 2013 10:05:22 -0600
New Thread tamper proofing electronic assembly
Re: tamper proofing electronic assembly
Joyce Koo
Sat, 27 Apr 2013 00:33:51 +0000
Re: tamper proofing electronic assembly
Steven Creswick
Fri, 26 Apr 2013 19:59:58 -0400
Re: tamper proofing electronic assembly
Bev Christian
Fri, 26 Apr 2013 19:36:48 -0400
Re: tamper proofing electronic assembly
Wayne Thayer
Thu, 25 Apr 2013 13:41:23 +0000
Re: tamper proofing electronic assembly
David D. Hillman
Thu, 25 Apr 2013 08:38:11 -0500
tamper proofing electronic assembly
Eric Laroche
Thu, 25 Apr 2013 08:46:30 -0400
New Thread Test...
Re: Test...
Steven Creswick
Tue, 9 Apr 2013 15:29:36 -0400
Re: Test...
Chuck Brummer
Tue, 9 Apr 2013 07:32:55 -0700
Re: Test...
Whittaker, Dewey (EHCOE)
Tue, 9 Apr 2013 14:20:42 +0000
Re: Test...
Nutting, Phil
Tue, 9 Apr 2013 14:05:15 +0000
Re: Test...
Whittaker, Dewey (EHCOE)
Tue, 9 Apr 2013 13:53:12 +0000
Re: Test...
Stadem, Richard D.
Tue, 9 Apr 2013 11:45:39 +0000
Test...
Steve Gregory
Mon, 8 Apr 2013 21:03:51 -0600
New Thread Useful wave solderpot life when using leadfree solder
Re: Useful wave solderpot life when using leadfree solder
Ed Popielarski
Wed, 17 Apr 2013 15:39:36 +0000
Re: Useful wave solderpot life when using leadfree solder
Goodyear, Patrick
Tue, 16 Apr 2013 22:29:28 +0000
Re: Useful wave solderpot life when using leadfree solder
Ed Popielarski
Fri, 12 Apr 2013 15:57:07 +0000
Useful wave solderpot life when using leadfree solder
Steve Gregory
Thu, 11 Apr 2013 19:54:53 -0600
New Thread Via in pad using filled or plugged vias
Re: Via in pad using filled or plugged vias
John Parsons
Fri, 26 Apr 2013 10:07:42 -0700
Re: Via in pad using filled or plugged vias
Julie Silk
Fri, 26 Apr 2013 11:55:38 -0500
Re: Via in pad using filled or plugged vias
Smith, Rick
Thu, 25 Apr 2013 20:39:05 +0000
Re: Via in pad using filled or plugged vias
Pete
Tue, 23 Apr 2013 14:43:35 -0500
Re: Via in pad using filled or plugged vias
Phil Bavaro
Tue, 23 Apr 2013 16:35:23 +0000
Re: Via in pad using filled or plugged vias
Nowland, Russell Howard (Russell)
Tue, 23 Apr 2013 15:35:31 +0000
Re: Via in pad using filled or plugged vias
Furrow, Robert
Tue, 23 Apr 2013 15:00:17 +0000
Re: Via in pad using filled or plugged vias
Jason Zhao
Tue, 23 Apr 2013 08:44:10 -0500
Re: Via in pad using filled or plugged vias
Vladimir Igoshev
Tue, 23 Apr 2013 13:32:17 +0000
Re: Via in pad using filled or plugged vias
MacFadden, Todd
Tue, 23 Apr 2013 13:30:54 +0000
Re: Via in pad using filled or plugged vias
Rex Waygood
Tue, 23 Apr 2013 14:24:46 +0100
Via in pad using filled or plugged vias
David Bealer
Tue, 23 Apr 2013 13:16:42 +0000
New Thread Wire bond
Wire bond
Steven Kelly
Fri, 5 Apr 2013 15:04:55 -0400
New Thread [TN] copper nanosolder
Re: FW: [TN] copper nanosolder
Mike Fenner
Thu, 11 Apr 2013 21:25:30 +0100
FW: [TN] copper nanosolder
Bob Landman
Thu, 11 Apr 2013 14:38:50 -0400
New Thread [TN] Victor's PTH picture...
Re: Fw: [TN] Victor's PTH picture...
Ed Popielarski
Wed, 10 Apr 2013 15:33:23 +0000
Fw: [TN] Victor's PTH picture...
Steve Gregory
Mon, 8 Apr 2013 21:12:52 -0600

ATOM RSS1 RSS2