TECHNET Archives

February 2009

TechNet@IPC.ORG
Options: Hide Table of Contents

2-D Laser Etch Barcodes on PCBs (3 Messages)
2141A errata microstrip equation (2 Messages)
Acceptability of Inverted Resistor Packs or Modules (1 Message)
Access (1 Message)
Apex Expo (29 Messages)
APEX EXPO - more ideas on getting approval (2 Messages)
BGA stencil aperture design guidelines (2 Messages)
BGA testing sockets (3 Messages)
Bridging on SMD Connector (13 Messages)
C4 attach to organic laminate material (1 Message)
Capacitor construction - foil alloy question (4 Messages)
Ceramic Core PCBs (3 Messages)
Coating material (20 Messages)
Component Assembly and Design Tool Technology Intechange workshops, March 2009, Santa Clara, California (1 Message)
CONFLICT: IPC-2223B and IPC-6013A (1 Message)
Conformal Coating Inspection (16 Messages)
Conformal coating or encapsulating (4 Messages)
Copper Mirror Test (3 Messages)
Counterfeit components market data (7 Messages)
CRACKED ENIG PADS (31 Messages)
Cup terminals. Soldering requirements. (1 Message)
dewetting (6 Messages)
Earl Moon (12 Messages)
EMF shielding of MRAM devices (1 Message)
ENIS (3 Messages)
Fab house audit guideline/template (3 Messages)
Flex Carrier? (6 Messages)
Hello everybody (7 Messages)
hi: (2 Messages)
Hot Slump (8 Messages)
ICOM 5000 ROSE Tester Contact Information (3 Messages)
In Search of a Technical Reference (10 Messages)
IPC Component Assembly Workshop Series, March 9-11, 2009, Santa Clara, California (1 Message)
IPC through-hole LEAD diameter to HOLE diameter (1 Message)
IPC-CC-830 (8 Messages)
JEDEC STD 22-A113 question (1 Message)
Jumper wire forming for fine pitch QFP? (8 Messages)
Last call for Lead-Free Conference Mar 3-5 (1 Message)
Last Chance to Register-IPC/JEDEC Lead Free Conference Preview - FREE Webinar (1 Message)
lead adding (18 Messages)
Lead Free solder compatibility (7 Messages)
Leadfree has gone too far. (36 Messages)
Local Solder Dross Recovery & solder joint reliability (3 Messages)
Looking for manufacturer of air bag deployment modules (1 Message)
Looking for test fixture quick release snap-in hold-down clamp (6 Messages)
LPIM (3 Messages)
Make your hotel reservations now for the IPC/JEDEC Lead Free Conference-March 3-5, 2009 (1 Message)
Maybe not counterfeit, but definitely weird! (13 Messages)
microscopes (14 Messages)
Misprints (2 Messages)
Moisture Content of PWB's for Assembly? (5 Messages)
MSN (1 Message)
No Clean that can be removed? (2 Messages)
NTC - Weird one - bismuth in overmold (13 Messages)
NTC anti-this-and-that programs (32 Messages)
NTC Look Out! (5 Messages)
NTC RE: [TN] Hello everybody (4 Messages)
NTC [TN] In Search of a Technical Reference (1 Message)
Part solderability (25 Messages)
PCB'S minimum line width (3 Messages)
Permissible current and voltage in PCB (4 Messages)
Questionnaire (14 Messages)
REACH legislation? How's it going? (2 Messages)
Recall: [TN] Safety question (1 Message)
Recommendation for a rapid prototype PCB fabricator (12 Messages)
Reflowing CBGA component (with high Sn balls) using Eutectic solder paste (10 Messages)
Register Today! Flex Conference April 21-23, 2009 Minneapolis, Minn. (1 Message)
Repair soldermask (8 Messages)
robotic dispensing (8 Messages)
RoHS list (8 Messages)
Rolling MELFs (2 Messages)
Safety question (7 Messages)
Selective Soldering design rules (1 Message)
Sequencer Tape Suppliers? (2 Messages)
Soldering Alloy 260 (3 Messages)
Staking Question/Help... (9 Messages)
Storage of Iag PWAs (5 Messages)
Technical Reference for oceanic shipping (5 Messages)
Typical Cost difference between IPC-6012 Class 2 and Cla ss 3 boards (1 Message)
Typical Cost difference between IPC-6012 Class 2 and Class 3 boards (3 Messages)
Ultrasonic cleaner for PCB (6 Messages)
UMICORE PASTE (1 Message)
Vapor degreaser help (1 Message)
Vapor Phase Soldering (7 Messages)
Virus Hoax (7 Messages)
Weird one - bismuth in overmold (12 Messages)
Where's the JCAA-JG-PP page? (6 Messages)
Wire Bonding Dummy Parts (4 Messages)
Workmanship criteria for ipass connector (3 Messages)
[NTC] Cool New Google Tool (2 Messages)
[NTC] Repair soldermask (1 Message)
[TC] [IPC-600-6012] Microvias (2 Messages)
[tinwhiskers] - RoHS & BGAs!!! (3 Messages)
[tinwhiskers] Re: - RoHS & BGAs!!! (10 Messages)
[tinwhiskers] Re: Bourns announces hot dipping of tin - comments? (1 Message)
[TN] CRACKED ENIG PADS (1 Message)
[TN] NTC anti-this-and-that programs (1 Message)

Subject Sorted by Subject, Most Recent First

From

Date
New Thread 2-D Laser Etch Barcodes on PCBs
2-D Laser Etch Barcodes on PCBs
Brian Chandler
Thu, 12 Feb 2009 09:52:47 -0600
Re: 2-D Laser Etch Barcodes on PCBs
Stewart, Dougal
Thu, 12 Feb 2009 16:31:25 -0000
Re: 2-D Laser Etch Barcodes on PCBs
Wolfgang Erat
Fri, 13 Feb 2009 09:34:36 -0500
New Thread 2141A errata microstrip equation
2141A errata microstrip equation
Michael Holz
Tue, 17 Feb 2009 11:27:09 -0600
Re: 2141A errata microstrip equation
Craig Sullivan
Thu, 19 Feb 2009 09:17:11 -0500
New Thread Acceptability of Inverted Resistor Packs or Modules
Acceptability of Inverted Resistor Packs or Modules
Leland Woodall
Fri, 6 Feb 2009 10:25:44 -0500
New Thread Access
Access
Bev Christian
Thu, 12 Feb 2009 11:56:56 -0500
New Thread Apex Expo
Apex Expo
Gen Gibbard
Mon, 2 Feb 2009 12:38:10 -0800
Re: Apex Expo
Ioan Tempea
Mon, 2 Feb 2009 16:00:47 -0500
Re: Apex Expo
Wilson, Bob
Mon, 2 Feb 2009 13:18:24 -0800
Re: Apex Expo
Bev Christian
Mon, 2 Feb 2009 16:24:46 -0500
Re: Apex Expo
Whittaker, Dewey (EHCOE)
Mon, 2 Feb 2009 14:26:09 -0700
Re: Apex Expo
Stadem, Richard D.
Mon, 2 Feb 2009 15:27:33 -0600
Re: Apex Expo
Werner engelmaier
Mon, 2 Feb 2009 16:34:35 -0500
Re: Apex Expo
Joe Fjelstad
Mon, 2 Feb 2009 16:36:45 -0500
Re: Apex Expo
Karen Tellefsen
Mon, 2 Feb 2009 16:47:38 -0500
Re: Apex Expo
Joe Fjelstad
Mon, 2 Feb 2009 16:46:40 -0500
Re: Apex Expo
Lee parker
Mon, 2 Feb 2009 16:52:13 -0500
Re: Apex Expo
Graham Naisbitt
Tue, 3 Feb 2009 12:23:02 +0000
Re: Apex Expo
Mike Fenner
Tue, 3 Feb 2009 13:36:30 -0000
Re: Apex Expo
Paul Reid
Tue, 3 Feb 2009 09:55:21 -0500
Re: Apex Expo
Stadem, Richard D.
Tue, 3 Feb 2009 08:58:25 -0600
Re: Apex Expo
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 08:14:03 -0700
Re: Apex Expo
Paul Reid
Tue, 3 Feb 2009 10:33:17 -0500
Re: Apex Expo
Stadem, Richard D.
Tue, 3 Feb 2009 09:37:03 -0600
Re: Apex Expo
Joyce Koo
Tue, 3 Feb 2009 10:38:13 -0500
Re: Apex Expo
Graham Naisbitt
Tue, 3 Feb 2009 15:39:53 +0000
Re: Apex Expo
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 08:43:21 -0700
Re: Apex Expo
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 08:44:57 -0700
Re: Apex Expo
Werner engelmaier
Tue, 3 Feb 2009 11:54:58 -0500
Re: Apex Expo
Stadem, Richard D.
Tue, 3 Feb 2009 11:01:19 -0600
Re: Apex Expo
Ahne Oosterhof
Tue, 3 Feb 2009 16:57:41 -0800
Re: Apex Expo
Douglas Pauls
Wed, 4 Feb 2009 11:29:48 -0600
Re: Apex Expo
Ian Hanna
Wed, 4 Feb 2009 12:35:30 -0500
Re: Apex Expo
Douglas Pauls
Wed, 4 Feb 2009 11:54:19 -0600
Re: Apex Expo
Joyce Koo
Wed, 4 Feb 2009 13:02:42 -0500
New Thread APEX EXPO - more ideas on getting approval
APEX EXPO - more ideas on getting approval
Kim Sterling
Tue, 3 Feb 2009 09:01:46 -0600
Re: APEX EXPO - more ideas on getting approval
Joyce Koo
Tue, 3 Feb 2009 10:36:30 -0500
New Thread BGA stencil aperture design guidelines
BGA stencil aperture design guidelines
Gervascio, Thomas L
Wed, 11 Feb 2009 15:20:36 -0500
Re: BGA stencil aperture design guidelines
Bill Kunkle
Thu, 12 Feb 2009 13:37:52 -0500
New Thread BGA testing sockets
BGA testing sockets
David Tremmel
Thu, 19 Feb 2009 21:08:06 +0000
Re: BGA testing sockets
Stadem, Richard D.
Thu, 19 Feb 2009 15:20:49 -0600
Re: BGA testing sockets
Stadem, Richard D.
Mon, 23 Feb 2009 07:41:19 -0600
New Thread Bridging on SMD Connector
Bridging on SMD Connector
John Anselmo
Mon, 2 Feb 2009 12:49:33 -0700
Re: Bridging on SMD Connector
Steve Kelly
Mon, 2 Feb 2009 15:49:09 -0500
Re: Bridging on SMD Connector
Guy Ramsey
Mon, 2 Feb 2009 15:56:23 -0500
Re: Bridging on SMD Connector
Ioan Tempea
Mon, 2 Feb 2009 16:08:31 -0500
Re: Bridging on SMD Connector
Ted Tontis
Mon, 2 Feb 2009 16:04:44 -0600
Re: Bridging on SMD Connector
John Anselmo
Mon, 2 Feb 2009 15:24:45 -0700
Re: Bridging on SMD Connector
John Anselmo
Mon, 2 Feb 2009 15:29:32 -0700
Re: Bridging on SMD Connector
Randy Morrison
Mon, 2 Feb 2009 14:37:30 -0800
Re: Bridging on SMD Connector
Ted Tontis
Mon, 2 Feb 2009 17:08:00 -0600
Re: Bridging on SMD Connector
John Anselmo
Mon, 2 Feb 2009 17:24:28 -0700
Re: Bridging on SMD Connector
P. Langeveld
Tue, 3 Feb 2009 11:35:18 +0100
Re: Bridging on SMD Connector
Guy Ramsey
Tue, 3 Feb 2009 07:29:22 -0500
Re: Bridging on SMD Connector
Ted Tontis
Tue, 3 Feb 2009 08:08:09 -0600
New Thread C4 attach to organic laminate material
Re: C4 attach to organic laminate material
Mike Fenner
Mon, 2 Feb 2009 14:11:57 -0000
New Thread Capacitor construction - foil alloy question
Capacitor construction - foil alloy question
Carl VanWormer
Mon, 16 Feb 2009 06:46:44 -0800
Re: Capacitor construction - foil alloy question
Dennis Fritz
Mon, 16 Feb 2009 19:00:54 -0500
Re: Capacitor construction - foil alloy question
Carl VanWormer
Mon, 16 Feb 2009 16:24:13 -0800
Re: Capacitor construction - foil alloy question
Hernefjord Ingemar
Tue, 17 Feb 2009 13:50:58 +0100
New Thread Ceramic Core PCBs
Ceramic Core PCBs
Werner engelmaier
Mon, 23 Feb 2009 14:21:48 -0500
Re: Ceramic Core PCBs
Hernefjord Ingemar
Tue, 24 Feb 2009 08:35:05 +0100
Re: Ceramic Core PCBs
Werner engelmaier
Tue, 24 Feb 2009 08:20:22 -0500
New Thread Coating material
Coating material
Ted Tontis
Thu, 5 Feb 2009 08:20:29 -0600
Re: Coating material
Ted Tontis
Thu, 5 Feb 2009 15:56:58 -0600
Re: Coating material
Douglas Pauls
Thu, 5 Feb 2009 16:32:41 -0600
Re: Coating material
Ted Tontis
Thu, 5 Feb 2009 17:13:59 -0600
Re: Coating material
Grunde Gjertsen
Fri, 6 Feb 2009 09:00:47 +0100
Re: Coating material
Whittaker, Dewey (EHCOE)
Fri, 6 Feb 2009 06:38:08 -0700
Re: Coating material
Kevin Glidden
Fri, 6 Feb 2009 09:01:26 -0500
Re: Coating material
Whittaker, Dewey (EHCOE)
Fri, 6 Feb 2009 07:12:04 -0700
Re: Coating material
Ted Tontis
Fri, 6 Feb 2009 08:26:17 -0600
Re: Coating material
Joyce Koo
Fri, 6 Feb 2009 09:27:47 -0500
Re: Coating material
Mike Sewell
Fri, 6 Feb 2009 08:40:42 -0600
Re: Coating material
Ted Tontis
Fri, 6 Feb 2009 08:41:50 -0600
Re: Coating material
Douglas Pauls
Fri, 6 Feb 2009 10:28:38 -0600
Re: Coating material
Kevin Glidden
Fri, 6 Feb 2009 13:07:07 -0500
Re: Coating material
Inge
Sat, 7 Feb 2009 23:59:38 +0100
Re: Coating material
Ted Tontis
Mon, 9 Feb 2009 09:04:57 -0600
Re: Coating material
Grunde Gjertsen
Tue, 10 Feb 2009 14:14:46 +0100
Re: Coating material
Ted Tontis
Fri, 27 Feb 2009 10:59:12 -0600
Re: Coating material
Joyce Koo
Fri, 27 Feb 2009 12:53:58 -0500
Re: Coating material
Ted Tontis
Fri, 27 Feb 2009 11:59:14 -0600
New Thread Component Assembly and Design Tool Technology Intechange workshops, March 2009, Santa Clara, California
Component Assembly and Design Tool Technology Intechange workshops, March 2009, Santa Clara, California
Tina Nerad
Tue, 10 Feb 2009 08:55:58 -0600
New Thread CONFLICT: IPC-2223B and IPC-6013A
Re: CONFLICT: IPC-2223B and IPC-6013A
Anslow, Phillip (UK)
Fri, 6 Feb 2009 11:30:57 -0000
New Thread Conformal Coating Inspection
Conformal Coating Inspection
Bob Willis
Fri, 20 Feb 2009 15:52:19 -0000
Re: Conformal Coating Inspection
Brian Ellis
Fri, 20 Feb 2009 18:00:20 +0200
Re: Conformal Coating Inspection
Keith Calhoun
Fri, 20 Feb 2009 11:08:29 -0500
Re: Conformal Coating Inspection
Mike Fenner
Fri, 20 Feb 2009 16:30:52 -0000
Re: Conformal Coating Inspection
Ken Bloomquist
Fri, 20 Feb 2009 08:50:20 -0800
Re: Conformal Coating Inspection
Bob Willis
Fri, 20 Feb 2009 18:44:41 -0000
Re: Conformal Coating Inspection
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 09:15:25 -0700
Re: Conformal Coating Inspection
Bob Willis
Mon, 23 Feb 2009 16:50:03 -0000
Re: Conformal Coating Inspection
Stadem, Richard D.
Mon, 23 Feb 2009 11:19:22 -0600
Re: Conformal Coating Inspection
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 10:33:09 -0700
Re: Conformal Coating Inspection
Bob Willis
Mon, 23 Feb 2009 18:26:35 -0000
Re: Conformal Coating Inspection
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 11:51:36 -0700
Re: Conformal Coating Inspection
John Burke
Mon, 23 Feb 2009 11:38:23 -0800
Re: Conformal Coating Inspection
Roberts, Jon
Mon, 23 Feb 2009 14:18:58 -0600
Re: Conformal Coating Inspection
Stadem, Richard D.
Mon, 23 Feb 2009 14:23:23 -0600
Re: Conformal Coating Inspection
Lum Wee Mei
Sat, 28 Feb 2009 10:07:03 +0800
New Thread Conformal coating or encapsulating
Conformal coating or encapsulating
Phil Nutting
Thu, 26 Feb 2009 11:53:04 -0500
Re: Conformal coating or encapsulating
Stadem, Richard D.
Thu, 26 Feb 2009 11:05:39 -0600
Re: Conformal coating or encapsulating
Graham Collins
Thu, 26 Feb 2009 13:05:51 -0400
Re: Conformal coating or encapsulating
Phil Nutting
Thu, 26 Feb 2009 13:02:19 -0500
New Thread Copper Mirror Test
Copper Mirror Test
Bev Christian
Wed, 11 Feb 2009 15:56:48 -0500
Re: Copper Mirror Test
Richard Kraszewski
Fri, 13 Feb 2009 09:19:23 -0600
Re: Copper Mirror Test
Bev Christian
Fri, 13 Feb 2009 11:35:34 -0500
New Thread Counterfeit components market data
Counterfeit components market data
John Burke
Mon, 9 Feb 2009 10:22:17 -0800
Re: Counterfeit components market data
Lee Whiteman
Mon, 9 Feb 2009 13:25:10 -0500
Re: Counterfeit components market data
Bev Christian
Mon, 9 Feb 2009 13:28:55 -0500
Re: Counterfeit components market data
Jerry Dengler
Mon, 9 Feb 2009 13:29:35 -0500
Re: Counterfeit components market data
Bev Christian
Mon, 9 Feb 2009 13:51:58 -0500
Re: Counterfeit components market data
Inge
Mon, 9 Feb 2009 21:34:57 +0100
Re: Counterfeit components market data
Lee Whiteman
Mon, 9 Feb 2009 15:35:58 -0500
New Thread CRACKED ENIG PADS
CRACKED ENIG PADS
Lee Whiteman
Wed, 11 Feb 2009 13:20:11 -0500
Re: CRACKED ENIG PADS
Steve Gregory
Wed, 11 Feb 2009 12:41:42 -0600
Re: CRACKED ENIG PADS
Wenger, George M.
Wed, 11 Feb 2009 13:51:09 -0500
Re: CRACKED ENIG PADS
Victor Hernandez
Wed, 11 Feb 2009 13:23:14 -0600
Re: CRACKED ENIG PADS
Vladimir Igoshev
Wed, 11 Feb 2009 19:41:24 +0000
Re: CRACKED ENIG PADS
Lee Whiteman
Wed, 11 Feb 2009 14:41:46 -0500
Re: CRACKED ENIG PADS
Inge
Wed, 11 Feb 2009 20:51:02 +0100
Re: CRACKED ENIG PADS
Paul Edwards
Wed, 11 Feb 2009 12:04:43 -0800
Re: CRACKED ENIG PADS
Werner engelmaier
Wed, 11 Feb 2009 15:27:41 -0500
Re: CRACKED ENIG PADS
Vladimir Igoshev
Wed, 11 Feb 2009 20:40:39 +0000
Re: CRACKED ENIG PADS
Steve Gregory
Wed, 11 Feb 2009 14:46:01 -0600
Re: CRACKED ENIG PADS
Inge
Wed, 11 Feb 2009 21:50:06 +0100
Re: CRACKED ENIG PADS
Werner engelmaier
Wed, 11 Feb 2009 15:52:14 -0500
Re: CRACKED ENIG PADS
Woolley, Mark D. (Mark)
Wed, 11 Feb 2009 13:56:19 -0700
Re: CRACKED ENIG PADS
Bev Christian
Wed, 11 Feb 2009 16:01:40 -0500
Re: CRACKED ENIG PADS
Vladimir Igoshev
Wed, 11 Feb 2009 21:04:53 +0000
Re: CRACKED ENIG PADS
John Burke
Wed, 11 Feb 2009 13:15:04 -0800
Re: CRACKED ENIG PADS
Sunny Liu
Wed, 11 Feb 2009 13:20:14 -0800
Re: CRACKED ENIG PADS
Stadem, Richard D.
Wed, 11 Feb 2009 15:31:01 -0600
Re: CRACKED ENIG PADS
Thayer, Wayne
Wed, 11 Feb 2009 16:42:23 -0500
Re: CRACKED ENIG PADS
Vladimir Igoshev
Wed, 11 Feb 2009 16:59:17 -0500
Re: CRACKED ENIG PADS
Werner engelmaier
Wed, 11 Feb 2009 17:11:33 -0500
Re: CRACKED ENIG PADS
David D. Hillman
Wed, 11 Feb 2009 16:33:00 -0600
Re: CRACKED ENIG PADS
Lee Whiteman
Wed, 11 Feb 2009 17:50:10 -0500
Re: CRACKED ENIG PADS
Thayer, Wayne
Wed, 11 Feb 2009 18:47:11 -0500
Re: CRACKED ENIG PADS
Bob Willis
Thu, 12 Feb 2009 16:17:59 -0000
Re: CRACKED ENIG PADS
Paul Reid
Thu, 12 Feb 2009 15:48:48 -0500
Re: CRACKED ENIG PADS
Dwight Mattix
Thu, 12 Feb 2009 13:17:14 -0800
Re: CRACKED ENIG PADS
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 06:50:10 -0700
Re: CRACKED ENIG PADS
Dwight Mattix
Fri, 13 Feb 2009 07:23:21 -0800
Re: CRACKED ENIG PADS
Paul Reid
Fri, 13 Feb 2009 11:36:22 -0500
New Thread Cup terminals. Soldering requirements.
Cup terminals. Soldering requirements.
Juan T. Marugán
Mon, 16 Feb 2009 14:11:18 -0600
New Thread dewetting
dewetting
Louis Hart
Thu, 19 Feb 2009 11:23:21 -0500
Re: dewetting
Brian Ellis
Thu, 19 Feb 2009 19:02:29 +0200
Re: dewetting
David D. Hillman
Thu, 19 Feb 2009 11:28:42 -0600
Re: dewetting
Mike Fenner
Fri, 20 Feb 2009 08:20:01 -0000
Re: dewetting
Brian Ellis
Fri, 20 Feb 2009 11:08:21 +0200
Re: dewetting
Hernefjord Ingemar
Mon, 23 Feb 2009 10:19:11 +0100
New Thread Earl Moon
Earl Moon
Ioan Tempea
Wed, 4 Feb 2009 07:57:21 -0500
Re: Earl Moon
Randall L Bock
Wed, 4 Feb 2009 08:00:47 -0500
Re: Earl Moon
Steve Gregory
Wed, 4 Feb 2009 07:07:31 -0600
Re: Earl Moon
Simonik, Dave R. (David)
Wed, 4 Feb 2009 08:17:30 -0500
Re: Earl Moon
Ioan Tempea
Wed, 4 Feb 2009 08:21:14 -0500
Re: Earl Moon
Joe Fjelstad
Wed, 4 Feb 2009 12:38:38 EST
Re: Earl Moon
Randall L Bock
Wed, 4 Feb 2009 12:43:13 -0500
Earl Moon
Jack Olson
Thu, 5 Feb 2009 14:28:21 -0600
Re: Earl Moon
EIMCNews
Thu, 5 Feb 2009 12:40:24 -0800
Re: Earl Moon
Ioan Tempea
Thu, 5 Feb 2009 15:44:42 -0500
Re: Earl Moon
Jack Olson
Thu, 5 Feb 2009 14:51:29 -0600
Re: Earl Moon
鸿 金
Sat, 7 Feb 2009 17:10:09 +0800
New Thread EMF shielding of MRAM devices
EMF shielding of MRAM devices
Stadem, Richard D.
Tue, 3 Feb 2009 10:29:08 -0600
New Thread ENIS
ENIS
Ioan Tempea
Thu, 12 Feb 2009 09:27:39 -0500
Re: ENIS
David D. Hillman
Thu, 12 Feb 2009 09:05:35 -0600
Re: ENIS
Joyce Koo
Thu, 12 Feb 2009 10:36:30 -0500
New Thread Fab house audit guideline/template
Fab house audit guideline/template
Craig Sullivan
Fri, 27 Feb 2009 09:55:46 -0600
Re: Fab house audit guideline/template
Scott Westheimer
Fri, 27 Feb 2009 11:27:24 -0500
Re: Fab house audit guideline/template
Craig Sullivan
Fri, 27 Feb 2009 11:39:57 -0500
New Thread Flex Carrier?
Flex Carrier?
John Parsons
Wed, 25 Feb 2009 16:55:55 -0800
Re: Flex Carrier?
Bob Willis
Thu, 26 Feb 2009 08:03:04 -0000
Re: Flex Carrier?
Joe Fjelstad
Thu, 26 Feb 2009 11:13:16 EST
Re: Flex Carrier?
John Parsons
Thu, 26 Feb 2009 08:29:37 -0800
Re: Flex Carrier?
John Parsons
Thu, 26 Feb 2009 13:29:48 -0800
Re: Flex Carrier?
Bob Willis
Fri, 27 Feb 2009 08:12:24 -0000
New Thread Hello everybody
Hello everybody
Liu, Edwin
Thu, 12 Feb 2009 20:09:30 +0800
Re: Hello everybody
Leland Woodall
Thu, 12 Feb 2009 09:14:56 -0500
Re: Hello everybody
Stadem, Richard D.
Thu, 12 Feb 2009 08:33:32 -0600
Re: Hello everybody
Barbara Burcham
Thu, 12 Feb 2009 08:45:30 -0600
Re: Hello everybody
Guy Ramsey
Thu, 12 Feb 2009 10:11:27 -0500
Re: Hello everybody
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 06:31:48 -0700
Re: Hello everybody
jonathan noquil
Fri, 13 Feb 2009 22:20:45 +0800
New Thread hi:
hi:
Aquino Quek
Mon, 16 Feb 2009 05:25:20 +0800
Re: hi:
Brian Ellis
Mon, 16 Feb 2009 09:54:25 +0200
New Thread Hot Slump
Hot Slump
Bev Christian
Thu, 19 Feb 2009 15:41:00 -0500
Re: Hot Slump
Richard Kraszewski
Thu, 19 Feb 2009 15:02:10 -0600
Re: Hot Slump
Stadem, Richard D.
Thu, 19 Feb 2009 15:16:06 -0600
Re: Hot Slump
Mike Fenner
Fri, 20 Feb 2009 12:03:05 -0000
Re: Hot Slump
Graham Naisbitt
Fri, 20 Feb 2009 12:41:16 +0000
Re: Hot Slump
Bev Christian
Fri, 20 Feb 2009 08:04:16 -0500
Re: Hot Slump
Graham Naisbitt
Fri, 20 Feb 2009 13:31:18 +0000
Re: Hot Slump
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 09:06:50 -0700
New Thread ICOM 5000 ROSE Tester Contact Information
ICOM 5000 ROSE Tester Contact Information
Richard Kraszewski
Fri, 6 Feb 2009 08:33:32 -0600
Re: ICOM 5000 ROSE Tester Contact Information
Kevin Glidden
Fri, 6 Feb 2009 09:53:33 -0500
Re: ICOM 5000 ROSE Tester Contact Information
John Goulet
Sun, 15 Feb 2009 05:12:15 +0000
New Thread In Search of a Technical Reference
In Search of a Technical Reference
David D. Hillman
Thu, 5 Feb 2009 16:18:41 -0600
Re: In Search of a Technical Reference
Bev Christian
Thu, 5 Feb 2009 17:19:50 -0500
Re: In Search of a Technical Reference
Brian Ellis
Fri, 6 Feb 2009 09:29:33 +0200
Re: In Search of a Technical Reference
Mike Fenner
Fri, 6 Feb 2009 12:04:50 -0000
Re: In Search of a Technical Reference
David D. Hillman
Fri, 6 Feb 2009 07:38:31 -0600
Re: In Search of a Technical Reference
Whittaker, Dewey (EHCOE)
Fri, 6 Feb 2009 07:10:11 -0700
Re: In Search of a Technical Reference
Joyce Koo
Fri, 6 Feb 2009 09:25:29 -0500
Re: In Search of a Technical Reference
Brian Ellis
Fri, 6 Feb 2009 16:29:07 +0200
Re: In Search of a Technical Reference
Inge
Sun, 8 Feb 2009 00:50:34 +0100
Re: In Search of a Technical Reference
Brian Ellis
Sun, 8 Feb 2009 11:09:30 +0200
New Thread IPC Component Assembly Workshop Series, March 9-11, 2009, Santa Clara, California
IPC Component Assembly Workshop Series, March 9-11, 2009, Santa Clara, California
Tina Nerad
Wed, 4 Feb 2009 14:19:53 -0600
New Thread IPC through-hole LEAD diameter to HOLE diameter
Re: IPC through-hole LEAD diameter to HOLE diameter
Kim Sparrow
Mon, 2 Feb 2009 01:22:09 -0600
New Thread IPC-CC-830
IPC-CC-830
Jean-François Bissonnette
Fri, 13 Feb 2009 16:38:30 -0500
Re: IPC-CC-830
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 14:47:15 -0700
Re: IPC-CC-830
Ken Bloomquist
Fri, 13 Feb 2009 14:23:20 -0800
Re: IPC-CC-830
Richard Kraszewski
Fri, 13 Feb 2009 16:32:03 -0600
Re: IPC-CC-830
Douglas Pauls
Fri, 13 Feb 2009 17:02:06 -0600
Re: IPC-CC-830
Joe Macko
Tue, 17 Feb 2009 07:06:41 -0800
Re: IPC-CC-830
Jean-François Bissonnette
Wed, 25 Feb 2009 11:51:58 -0500
Re: IPC-CC-830
Douglas Pauls
Wed, 25 Feb 2009 13:13:03 -0600
New Thread JEDEC STD 22-A113 question
JEDEC STD 22-A113 question
Joe Macko
Mon, 9 Feb 2009 08:49:23 -0800
New Thread Jumper wire forming for fine pitch QFP?
Jumper wire forming for fine pitch QFP?
Graham Collins
Mon, 2 Feb 2009 08:59:05 -0400
Re: Jumper wire forming for fine pitch QFP?
Steve Gregory
Mon, 2 Feb 2009 07:04:30 -0600
Re: Jumper wire forming for fine pitch QFP?
Matthias Mansfeld
Mon, 2 Feb 2009 14:25:59 +0100
Re: Jumper wire forming for fine pitch QFP?
Mike Sewell
Mon, 2 Feb 2009 08:12:55 -0600
Re: Jumper wire forming for fine pitch QFP?
Graham Collins
Mon, 2 Feb 2009 10:02:52 -0400
Re: Jumper wire forming for fine pitch QFP?
Barbara Burcham
Mon, 2 Feb 2009 08:56:15 -0600
Re: Jumper wire forming for fine pitch QFP?
Mike Fenner
Mon, 2 Feb 2009 15:53:37 -0000
Re: Jumper wire forming for fine pitch QFP?
Thayer, Wayne
Mon, 2 Feb 2009 16:12:05 -0500
New Thread Last call for Lead-Free Conference Mar 3-5
Last call for Lead-Free Conference Mar 3-5
Anne Marie Mulvihill
Tue, 24 Feb 2009 11:23:17 -0600
New Thread Last Chance to Register-IPC/JEDEC Lead Free Conference Preview - FREE Webinar
Last Chance to Register-IPC/JEDEC Lead Free Conference Preview - FREE Webinar
Michelle Michelotti
Wed, 4 Feb 2009 14:07:08 -0600
New Thread lead adding
lead adding
Wilson, Bob
Mon, 9 Feb 2009 12:01:17 -0800
Re: lead adding
Joyce Koo
Mon, 9 Feb 2009 15:09:49 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 15:48:46 -0500
Re: lead adding
Inge
Mon, 9 Feb 2009 22:01:40 +0100
Re: lead adding
Joyce Koo
Mon, 9 Feb 2009 16:02:07 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 17:04:42 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 17:06:07 -0500
Re: lead adding
Joe Fjelstad
Mon, 9 Feb 2009 17:45:46 EST
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 18:45:56 -0500
Re: lead adding
Vladimir Igoshev
Mon, 9 Feb 2009 18:52:23 -0500
Re: lead adding
Joe Fjelstad
Mon, 9 Feb 2009 19:26:09 EST
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 19:35:05 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 19:44:16 -0500
Re: lead adding
Vladimir Igoshev
Mon, 9 Feb 2009 20:00:51 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 20:09:34 -0500
Re: lead adding
Joe Fjelstad
Mon, 9 Feb 2009 20:13:52 EST
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 20:23:15 -0500
Re: lead adding
Stadem, Richard D.
Tue, 10 Feb 2009 05:16:37 -0600
New Thread Lead Free solder compatibility
Lead Free solder compatibility
Tom Burek
Mon, 16 Feb 2009 11:28:00 -0700
Re: Lead Free solder compatibility
Werner engelmaier
Mon, 16 Feb 2009 14:34:43 -0500
Re: Lead Free solder compatibility
David D. Hillman
Mon, 16 Feb 2009 13:44:18 -0600
Re: Lead Free solder compatibility
Tom Burek
Mon, 16 Feb 2009 12:53:07 -0700
Re: Lead Free solder compatibility
Werner engelmaier
Mon, 16 Feb 2009 15:54:28 -0500
Re: Lead Free solder compatibility
Tom Burek
Mon, 16 Feb 2009 14:58:47 -0700
Re: Lead Free solder compatibility
Mike Fenner
Tue, 17 Feb 2009 10:52:58 -0000
New Thread Leadfree has gone too far.
Leadfree has gone too far.
Stadem, Richard D.
Tue, 17 Feb 2009 08:10:10 -0600
Re: Leadfree has gone too far.
Steve Gregory
Tue, 17 Feb 2009 08:45:09 -0600
Re: Leadfree has gone too far.
David Baldwin
Tue, 17 Feb 2009 07:47:51 -0700
Re: Leadfree has gone too far.
Upton, Shawn
Tue, 17 Feb 2009 09:59:19 -0500
Re: Leadfree has gone too far.
Upton, Shawn
Tue, 17 Feb 2009 10:06:14 -0500
Re: Leadfree has gone too far.
Phil Nutting
Tue, 17 Feb 2009 10:16:07 -0500
Re: Leadfree has gone too far.
keith Calhoun
Tue, 17 Feb 2009 10:21:51 -0500
Re: Leadfree has gone too far.
Graham Collins
Tue, 17 Feb 2009 11:22:39 -0400
Re: Leadfree has gone too far.
Deac Descoteaux
Tue, 17 Feb 2009 07:23:30 -0800
Re: Leadfree has gone too far.
Eric CHRISTISON
Tue, 17 Feb 2009 15:24:26 +0000
Re: Leadfree has gone too far.
David D. Hillman
Tue, 17 Feb 2009 09:26:45 -0600
Re: Leadfree has gone too far.
Graham Collins
Tue, 17 Feb 2009 11:29:59 -0400
Re: Leadfree has gone too far.
James Head
Tue, 17 Feb 2009 15:33:41 -0000
Re: Leadfree has gone too far.
Lee Whiteman
Tue, 17 Feb 2009 10:34:09 -0500
Re: Leadfree has gone too far.
Karen Tellefsen
Tue, 17 Feb 2009 10:36:56 -0500
Re: Leadfree has gone too far.
Graham Collins
Tue, 17 Feb 2009 11:36:41 -0400
Re: Leadfree has gone too far.
Stadem, Richard D.
Tue, 17 Feb 2009 09:29:01 -0600
Re: Leadfree has gone too far.
Dave Dixon
Tue, 17 Feb 2009 09:47:39 -0600
Re: Leadfree has gone too far.
Joe Fjelstad
Tue, 17 Feb 2009 10:49:41 EST
Re: Leadfree has gone too far.
Steven Creswick
Tue, 17 Feb 2009 10:49:49 -0500
Re: Leadfree has gone too far.
Brian Ellis
Tue, 17 Feb 2009 18:14:58 +0200
Re: Leadfree has gone too far.
Ted Tontis
Tue, 17 Feb 2009 10:25:58 -0600
Re: Leadfree has gone too far.
Dennis Fritz
Tue, 17 Feb 2009 11:30:47 -0500
Re: Leadfree has gone too far.
Joe Fjelstad
Tue, 17 Feb 2009 12:25:09 EST
Re: Leadfree has gone too far.
Bev Christian
Tue, 17 Feb 2009 12:37:07 -0500
Re: Leadfree has gone too far.
Dwight Mattix
Tue, 17 Feb 2009 10:06:33 -0800
Re: Leadfree has gone too far.
Dwight Mattix
Tue, 17 Feb 2009 10:07:29 -0800
Re: Leadfree has gone too far.
Dwight Mattix
Tue, 17 Feb 2009 10:09:01 -0800
Re: Leadfree has gone too far.
Upton, Shawn
Tue, 17 Feb 2009 13:23:43 -0500
Re: Leadfree has gone too far.
Joyce Koo
Tue, 17 Feb 2009 13:35:03 -0500
Re: Leadfree has gone too far.
Dwight Mattix
Tue, 17 Feb 2009 11:04:45 -0800
Re: Leadfree has gone too far.
Werner engelmaier
Tue, 17 Feb 2009 14:11:08 -0500
Re: Leadfree has gone too far.
Inge
Tue, 17 Feb 2009 20:15:43 +0100
Re: Leadfree has gone too far.
Bev Christian
Tue, 17 Feb 2009 14:27:47 -0500
Re: Leadfree has gone too far.
Charlie Pitarys
Wed, 18 Feb 2009 16:38:45 -0600
Re: Leadfree has gone too far.
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 07:47:32 -0700
New Thread Local Solder Dross Recovery & solder joint reliability
Local Solder Dross Recovery & solder joint reliability
Richard Kraszewski
Wed, 11 Feb 2009 12:27:20 -0600
Re: Local Solder Dross Recovery & solder joint reliability
Leigh-Ann Litavis
Wed, 11 Feb 2009 18:33:18 +0000
Re: Local Solder Dross Recovery & solder joint reliability
David D. Hillman
Wed, 11 Feb 2009 16:53:15 -0600
New Thread Looking for manufacturer of air bag deployment modules
Re: Looking for manufacturer of air bag deployment modules
Goulet mail
Thu, 5 Feb 2009 06:19:15 -0500
New Thread Looking for test fixture quick release snap-in hold-down clamp
Looking for test fixture quick release snap-in hold-down clamp
Carl VanWormer
Thu, 5 Feb 2009 07:25:55 -0800
Re: Looking for test fixture quick release snap-in hold-down clamp
Steve Gregory
Thu, 5 Feb 2009 10:08:36 -0600
Re: Looking for test fixture quick release snap-in hold-down clamp
Stadem, Richard D.
Thu, 5 Feb 2009 10:07:55 -0600
Re: Looking for test fixture quick release snap-in hold-down clamp
Stadem, Richard D.
Thu, 5 Feb 2009 10:28:34 -0600
Re: Looking for test fixture quick release snap-in hold-down clamp
Carl VanWormer
Thu, 5 Feb 2009 14:48:13 -0800
Re: Looking for test fixture quick release snap-in hold-down clamp
John Goulet
Sun, 8 Feb 2009 04:21:17 +0000
New Thread LPIM
LPIM
Miller, Rodney
Mon, 9 Feb 2009 15:03:29 -0600
Re: LPIM
Croslin, Robert
Tue, 10 Feb 2009 11:46:23 -0500
Re: LPIM
Miller, Rodney
Tue, 10 Feb 2009 10:52:49 -0600
New Thread Make your hotel reservations now for the IPC/JEDEC Lead Free Conference-March 3-5, 2009
Make your hotel reservations now for the IPC/JEDEC Lead Free Conference-March 3-5, 2009
Michelle Michelotti
Mon, 2 Feb 2009 10:21:48 -0600
New Thread Maybe not counterfeit, but definitely weird!
Maybe not counterfeit, but definitely weird!
Thayer, Wayne
Wed, 4 Feb 2009 14:41:44 -0500
Re: Maybe not counterfeit, but definitely weird!
Steve Gregory
Wed, 4 Feb 2009 15:56:53 -0600
Re: Maybe not counterfeit, but definitely weird!
Bev Christian
Wed, 4 Feb 2009 17:00:24 -0500
Re: Maybe not counterfeit, but definitely weird!
Dave Dixon
Wed, 4 Feb 2009 16:10:19 -0600
Re: Maybe not counterfeit, but definitely weird!
Thayer, Wayne
Wed, 4 Feb 2009 18:10:10 -0500
Re: Maybe not counterfeit, but definitely weird!
Ahne Oosterhof
Wed, 4 Feb 2009 15:33:33 -0800
Re: Maybe not counterfeit, but definitely weird!
Bev Christian
Wed, 4 Feb 2009 18:40:00 -0500
Re: Maybe not counterfeit, but definitely weird!
Inge
Thu, 5 Feb 2009 09:15:12 +0100
Re: Maybe not counterfeit, but definitely weird!
Steven Creswick
Thu, 5 Feb 2009 06:53:43 -0500
FW: Maybe not counterfeit, but definitely weird!
Miller, Rodney
Thu, 5 Feb 2009 08:24:16 -0600
Re: Maybe not counterfeit, but definitely weird!
Thayer, Wayne
Thu, 5 Feb 2009 14:10:34 -0500
Re: Maybe not counterfeit, but definitely weird!
Steven Creswick
Thu, 5 Feb 2009 16:09:18 -0500
Re: Maybe not counterfeit, but definitely weird!
legg
Thu, 5 Feb 2009 16:24:21 -0600
New Thread microscopes
microscopes
John Foster
Fri, 13 Feb 2009 10:01:34 -0800
Re: microscopes
Victor Hernandez
Fri, 13 Feb 2009 12:14:07 -0600
Re: microscopes
Paul Reid
Fri, 13 Feb 2009 13:14:39 -0500
Re: microscopes
Thayer, Wayne
Fri, 13 Feb 2009 13:17:19 -0500
Re: microscopes
Inge
Fri, 13 Feb 2009 19:30:01 +0100
Re: microscopes
Lee Whiteman
Fri, 13 Feb 2009 13:52:26 -0500
Re: microscopes
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 11:56:02 -0700
Re: microscopes
Robert Kondner
Fri, 13 Feb 2009 13:57:49 -0500
Re: microscopes
David D. Hillman
Fri, 13 Feb 2009 12:59:49 -0600
Re: microscopes
Ken Bloomquist
Fri, 13 Feb 2009 11:12:48 -0800
Re: microscopes
Stadem, Richard D.
Fri, 13 Feb 2009 13:30:18 -0600
Re: microscopes
Victor Hernandez
Fri, 13 Feb 2009 13:34:27 -0600
Re: microscopes
Ken Bloomquist
Fri, 13 Feb 2009 11:43:24 -0800
Re: microscopes
Victor Hernandez
Fri, 13 Feb 2009 14:41:26 -0600
New Thread Misprints
Misprints
Leif Erik Laerum
Thu, 19 Feb 2009 08:00:07 -0600
Re: Misprints
Jerry Dengler
Thu, 19 Feb 2009 09:35:37 -0500
New Thread Moisture Content of PWB's for Assembly?
Re: Moisture Content of PWB's for Assembly?
Kane, Amol (349)
Mon, 9 Feb 2009 14:00:17 -0500
Re: Moisture Content of PWB's for Assembly?
Inge
Mon, 9 Feb 2009 21:39:24 +0100
Re: Moisture Content of PWB's for Assembly?
Joyce Koo
Mon, 9 Feb 2009 15:44:57 -0500
Re: Moisture Content of PWB's for Assembly?
Miller, Rodney
Mon, 9 Feb 2009 14:59:21 -0600
Re: Moisture Content of PWB's for Assembly?
Joyce Koo
Mon, 9 Feb 2009 16:06:39 -0500
New Thread MSN
MSN
Liu, Edwin
Tue, 17 Feb 2009 16:37:25 +0800
New Thread No Clean that can be removed?
Re: No Clean that can be removed?
John Goulet
Mon, 2 Feb 2009 01:14:13 +0000
Re: No Clean that can be removed?
Brian Ellis
Mon, 2 Feb 2009 10:17:36 +0200
New Thread NTC - Weird one - bismuth in overmold
Re: NTC - Weird one - bismuth in overmold
David D. Hillman
Fri, 27 Feb 2009 10:52:22 -0600
Re: NTC - Weird one - bismuth in overmold
Genny Gibbard
Fri, 27 Feb 2009 10:56:24 -0600
Re: NTC - Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 11:12:58 -0600
Re: NTC - Weird one - bismuth in overmold
Douglas Pauls
Fri, 27 Feb 2009 11:28:02 -0600
Re: NTC - Weird one - bismuth in overmold
Lee Whiteman
Fri, 27 Feb 2009 12:38:21 -0500
Re: NTC - Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 11:42:59 -0600
Re: NTC - Weird one - bismuth in overmold
Douglas Pauls
Fri, 27 Feb 2009 11:53:42 -0600
Re: NTC - Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 12:16:03 -0600
Re: NTC - Weird one - bismuth in overmold
Victor Hernandez
Fri, 27 Feb 2009 12:33:02 -0600
Re: NTC - Weird one - bismuth in overmold
Dennis Fritz
Fri, 27 Feb 2009 14:20:14 -0500
Re: NTC - Weird one - bismuth in overmold
Phil Nutting
Fri, 27 Feb 2009 14:33:19 -0500
Re: NTC - Weird one - bismuth in overmold
ALLEN, LOA
Fri, 27 Feb 2009 11:43:49 -0800
Re: NTC - Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 14:06:20 -0600
New Thread NTC anti-this-and-that programs
NTC anti-this-and-that programs
Inge
Fri, 13 Feb 2009 20:06:04 +0100
Re: NTC anti-this-and-that programs
Ted Tontis
Fri, 13 Feb 2009 13:23:02 -0600
Re: NTC anti-this-and-that programs
Robert Kondner
Fri, 13 Feb 2009 14:32:00 -0500
Re: NTC anti-this-and-that programs
Ted Tontis
Fri, 13 Feb 2009 14:35:05 -0600
Re: NTC anti-this-and-that programs
Ian Hanna
Fri, 13 Feb 2009 15:49:21 -0500
Re: NTC anti-this-and-that programs
Inge
Fri, 13 Feb 2009 21:50:49 +0100
Re: NTC anti-this-and-that programs
Phil Nutting
Fri, 13 Feb 2009 16:12:21 -0500
Re: NTC anti-this-and-that programs
Ted Tontis
Fri, 13 Feb 2009 15:20:16 -0600
Re: NTC anti-this-and-that programs
Werner engelmaier
Fri, 13 Feb 2009 16:20:36 -0500
Re: NTC anti-this-and-that programs
Nivens, Carl W (US SSA)
Fri, 13 Feb 2009 17:20:25 -0500
Re: NTC anti-this-and-that programs
John Burke
Fri, 13 Feb 2009 14:43:36 -0800
Re: NTC anti-this-and-that programs
Ted Tontis
Fri, 13 Feb 2009 17:01:17 -0600
Re: NTC anti-this-and-that programs
Olav Folland
Fri, 13 Feb 2009 15:11:44 -0800
Re: NTC anti-this-and-that programs
Robert Kondner
Fri, 13 Feb 2009 18:58:49 -0500
Re: NTC anti-this-and-that programs
Inge
Sat, 14 Feb 2009 18:09:12 +0100
Re: NTC anti-this-and-that programs
Werner engelmaier
Sat, 14 Feb 2009 14:04:50 -0500
Re: NTC anti-this-and-that programs
Inge
Sat, 14 Feb 2009 21:13:02 +0100
Re: NTC anti-this-and-that programs
Robert Kondner
Sat, 14 Feb 2009 17:45:03 -0500
Re: NTC anti-this-and-that programs
Inge
Sun, 15 Feb 2009 11:17:41 +0100
Re: NTC anti-this-and-that programs
Steven Creswick
Sun, 15 Feb 2009 11:07:51 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Sun, 15 Feb 2009 13:56:49 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Sun, 15 Feb 2009 14:18:29 -0500
Re: NTC anti-this-and-that programs
Inge
Sun, 15 Feb 2009 23:16:34 +0100
Re: NTC anti-this-and-that programs
Robert Kondner
Mon, 16 Feb 2009 00:12:39 -0500
Re: NTC anti-this-and-that programs
Mike Fenner
Mon, 16 Feb 2009 10:58:48 -0000
Re: NTC anti-this-and-that programs
Graham Naisbitt
Mon, 16 Feb 2009 11:28:09 +0000
Re: NTC anti-this-and-that programs
ROGER STOOPS
Mon, 16 Feb 2009 10:25:12 -0800
Re: NTC anti-this-and-that programs
Robert Kondner
Mon, 16 Feb 2009 19:36:55 -0500
Re: NTC anti-this-and-that programs
Ted Tontis
Tue, 17 Feb 2009 09:33:05 -0600
Re: NTC anti-this-and-that programs
Robert Kondner
Tue, 17 Feb 2009 10:58:55 -0500
Re: NTC anti-this-and-that programs
Inge
Tue, 17 Feb 2009 18:13:29 +0100
Re: NTC anti-this-and-that programs
Inge
Tue, 17 Feb 2009 20:40:07 +0100
New Thread NTC Look Out!
NTC Look Out!
Steve Gregory
Mon, 9 Feb 2009 15:18:47 -0600
Re: NTC Look Out!
Inge
Mon, 9 Feb 2009 22:25:04 +0100
Re: NTC Look Out!
Lee Whiteman
Mon, 9 Feb 2009 16:26:48 -0500
Re: NTC Look Out!
Stadem, Richard D.
Mon, 9 Feb 2009 15:28:09 -0600
Re: NTC Look Out!
Ken Bloomquist
Mon, 9 Feb 2009 13:32:09 -0800
New Thread NTC RE: [TN] Hello everybody
NTC RE: [TN] Hello everybody
Graham Collins
Thu, 12 Feb 2009 11:21:03 -0400
Re: NTC RE: [TN] Hello everybody
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 06:35:51 -0700
Re: NTC RE: [TN] Hello everybody
Werner engelmaier
Fri, 13 Feb 2009 08:50:36 -0500
Re: NTC RE: [TN] Hello everybody
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 07:09:43 -0700
New Thread NTC [TN] In Search of a Technical Reference
Re: NTC [TN] In Search of a Technical Reference
Bev Christian
Sat, 7 Feb 2009 20:37:15 -0500
New Thread Part solderability
Part solderability
Graham Collins
Fri, 6 Feb 2009 10:12:23 -0400
Re: Part solderability
Steve Gregory
Fri, 6 Feb 2009 08:16:53 -0600
Re: Part solderability
Graham Collins
Fri, 6 Feb 2009 10:18:10 -0400
Re: Part solderability
Thayer, Wayne
Fri, 6 Feb 2009 10:00:45 -0500
Re: Part solderability
Graham Collins
Fri, 6 Feb 2009 11:18:37 -0400
Re: Part solderability
David D. Hillman
Fri, 6 Feb 2009 18:02:58 -0600
Re: Part solderability
P. Langeveld
Sat, 7 Feb 2009 11:03:06 +0100
Re: Part solderability
Inge
Sun, 8 Feb 2009 18:13:14 +0100
Re: Part solderability
Joyce Koo
Sun, 8 Feb 2009 12:34:06 -0500
Re: Part solderability
Inge
Sun, 8 Feb 2009 19:04:01 +0100
Re: Part solderability
Vladimir Igoshev
Sun, 8 Feb 2009 13:55:01 -0500
Re: Part solderability
John Burke
Sun, 8 Feb 2009 17:49:25 -0800
Re: Part solderability
Graham Collins
Mon, 9 Feb 2009 07:39:20 -0400
Re: Part solderability
David D. Hillman
Mon, 9 Feb 2009 07:47:26 -0600
Re: Part solderability
Wenger, George M.
Mon, 9 Feb 2009 09:15:02 -0500
Re: Part solderability
David D. Hillman
Mon, 9 Feb 2009 08:28:57 -0600
Re: Part solderability
Mike Fenner
Mon, 9 Feb 2009 16:19:58 -0000
Re: Part solderability
Graham Collins
Mon, 9 Feb 2009 13:57:53 -0400
Re: Part solderability
Paul Edwards
Mon, 9 Feb 2009 10:41:12 -0800
Re: Part solderability
Inge
Mon, 9 Feb 2009 21:30:33 +0100
Re: Part solderability
Graham Collins
Tue, 10 Feb 2009 10:23:09 -0400
Re: Part solderability
David D. Hillman
Tue, 10 Feb 2009 08:42:27 -0600
Re: Part solderability
Kane, Joseph E (US SSA)
Tue, 10 Feb 2009 16:47:41 -0500
Re: Part solderability
Joyce Koo
Tue, 10 Feb 2009 16:54:02 -0500
Re: Part solderability
John Goulet
Sun, 15 Feb 2009 04:38:12 +0000
New Thread PCB'S minimum line width
PCB'S minimum line width
Cong He
Tue, 17 Feb 2009 10:07:56 +0800
Re: PCB'S minimum line width
Kevin Glidden
Tue, 17 Feb 2009 09:55:13 -0500
Re: PCB'S minimum line width
Dennis Fritz
Wed, 18 Feb 2009 19:17:39 -0500
New Thread Permissible current and voltage in PCB
Permissible current and voltage in PCB
jckim(김정철)
Fri, 13 Feb 2009 10:07:46 +0900
Re: Permissible current and voltage in PCB
Jack Olson
Fri, 13 Feb 2009 08:55:10 -0600
Re: Permissible current and voltage in PCB
Jack Olson
Fri, 13 Feb 2009 09:27:26 -0600
Re: Permissible current and voltage in PCB
jckim(김정철)
Mon, 16 Feb 2009 11:18:18 +0900
New Thread Questionnaire
Questionnaire
Liu, Edwin
Mon, 16 Feb 2009 11:54:12 +0800
Re: Questionnaire
Deac Descoteaux
Mon, 16 Feb 2009 05:47:08 -0800
Re: Questionnaire
Karen Tellefsen
Mon, 16 Feb 2009 08:48:59 -0500
Re: Questionnaire
Steve Smith
Mon, 16 Feb 2009 09:20:57 -0500
Re: Questionnaire
James Head
Mon, 16 Feb 2009 14:31:53 -0000
Re: Questionnaire
Brian Ellis
Mon, 16 Feb 2009 17:21:47 +0200
Re: Questionnaire
Robert Kondner
Mon, 16 Feb 2009 11:06:38 -0500
Re: Questionnaire
Steve Gregory
Mon, 16 Feb 2009 10:33:46 -0600
Re: Questionnaire
John Foster
Mon, 16 Feb 2009 09:17:13 -0800
Re: Questionnaire
Robert Kondner
Mon, 16 Feb 2009 13:43:18 -0500
Re: Questionnaire
Liu, Edwin
Tue, 17 Feb 2009 11:52:34 +0800
Re: Questionnaire
Chris Knudsen
Tue, 17 Feb 2009 09:17:43 -0500
Re: Questionnaire
Croslin, Robert
Tue, 17 Feb 2009 11:12:34 -0500
Re: Questionnaire
Pete Houwen
Tue, 17 Feb 2009 13:35:41 -0600
New Thread REACH legislation? How's it going?
REACH legislation? How's it going?
Kelly Morris
Mon, 2 Feb 2009 15:10:52 -0600
Re: REACH legislation? How's it going?
Bev Christian
Tue, 3 Feb 2009 07:52:19 -0500
New Thread Recall: [TN] Safety question
Recall: [TN] Safety question
Tan Geok Ang
Thu, 19 Feb 2009 18:15:58 +0800
New Thread Recommendation for a rapid prototype PCB fabricator
Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Mon, 9 Feb 2009 09:04:12 -0500
Re: Recommendation for a rapid prototype PCB fabricator
Jerry Dengler
Mon, 9 Feb 2009 09:08:35 -0500
Re: Recommendation for a rapid prototype PCB fabricator
Dave Dixon
Mon, 9 Feb 2009 08:22:14 -0600
Re: Recommendation for a rapid prototype PCB fabricator
Joe Venditti
Mon, 9 Feb 2009 09:15:53 -0500
Re: Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Mon, 9 Feb 2009 09:43:58 -0500
Re: Recommendation for a rapid prototype PCB fabricator
Jac Kroeker
Mon, 9 Feb 2009 09:09:10 -0800
Re: Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Mon, 9 Feb 2009 12:51:05 -0500
Re: Recommendation for a rapid prototype PCB fabricator
Stadem, Richard D.
Mon, 9 Feb 2009 12:21:56 -0600
Re: Recommendation for a rapid prototype PCB fabricator
Jac Kroeker
Mon, 9 Feb 2009 12:16:23 -0800
Re: Recommendation for a rapid prototype PCB fabricator
Bob METCALF
Mon, 9 Feb 2009 13:55:57 -0800
Re: Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Mon, 9 Feb 2009 17:02:34 -0500
Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Tue, 10 Feb 2009 08:45:49 -0500
New Thread Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Joe Macko
Fri, 27 Feb 2009 08:03:39 -0800
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Vladimir Igoshev
Fri, 27 Feb 2009 11:07:20 -0500
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Gumpert, Ben
Fri, 27 Feb 2009 11:28:14 -0500
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Vladimir Igoshev
Fri, 27 Feb 2009 11:33:30 -0500
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
David D. Hillman
Fri, 27 Feb 2009 10:43:43 -0600
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Stadem, Richard D.
Fri, 27 Feb 2009 11:11:56 -0600
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Joyce Koo
Fri, 27 Feb 2009 12:48:40 -0500
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Vladimir Igoshev
Fri, 27 Feb 2009 18:13:20 +0000
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Steve Gregory
Fri, 27 Feb 2009 12:27:48 -0600
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Bob Willis
Fri, 27 Feb 2009 18:54:16 -0000
New Thread Register Today! Flex Conference April 21-23, 2009 Minneapolis, Minn.
Register Today! Flex Conference April 21-23, 2009 Minneapolis, Minn.
Michelle Michelotti
Wed, 4 Feb 2009 11:43:01 -0600
New Thread Repair soldermask
Repair soldermask
Ioan Tempea
Fri, 20 Feb 2009 08:47:01 -0500
Re: Repair soldermask
Andy Price
Fri, 20 Feb 2009 09:43:40 -0500
Re: Repair soldermask
Steve Gregory
Fri, 20 Feb 2009 08:44:26 -0600
Re: Repair soldermask
Bev Christian
Fri, 20 Feb 2009 09:51:53 -0500
Re: Repair soldermask
Ken Bloomquist
Fri, 20 Feb 2009 07:11:13 -0800
Re: Repair soldermask
Bev Christian
Fri, 20 Feb 2009 10:19:14 -0500
Re: Repair soldermask
Gabriela
Fri, 20 Feb 2009 19:51:09 +0200
Re: Repair soldermask
bob wettermann
Fri, 20 Feb 2009 08:58:50 -0800
New Thread robotic dispensing
robotic dispensing
Inge
Mon, 9 Feb 2009 21:53:41 +0100
Re: robotic dispensing
Ken Bloomquist
Mon, 9 Feb 2009 13:08:43 -0800
Re: robotic dispensing
Steven Creswick
Mon, 9 Feb 2009 16:18:20 -0500
Re: robotic dispensing
Inge
Mon, 9 Feb 2009 22:19:45 +0100
Re: robotic dispensing
Robert Kondner
Mon, 9 Feb 2009 16:44:46 -0500
Re: robotic dispensing
Inge
Mon, 9 Feb 2009 22:46:58 +0100
Re: robotic dispensing
Inge
Mon, 9 Feb 2009 22:53:45 +0100
Re: robotic dispensing
Steven Creswick
Mon, 9 Feb 2009 18:13:14 -0500
New Thread RoHS list
RoHS list
Inge
Sun, 8 Feb 2009 23:09:06 +0100
Re: RoHS list
Bev Christian
Sun, 8 Feb 2009 17:35:30 -0500
Re: RoHS list
John Burke
Sun, 8 Feb 2009 18:40:17 -0800
Re: RoHS list
Joyce Koo
Sun, 8 Feb 2009 22:30:06 -0500
Re: RoHS list
Joyce Koo
Sun, 8 Feb 2009 22:52:14 -0500
Re: RoHS list
Mike Fenner
Mon, 9 Feb 2009 11:45:03 -0000
Re: RoHS list
Pete Houwen
Mon, 9 Feb 2009 08:21:50 -0600
Re: RoHS list
Stadem, Richard D.
Mon, 9 Feb 2009 09:40:14 -0600
New Thread Rolling MELFs
Rolling MELFs
Gervascio, Thomas L
Fri, 27 Feb 2009 13:59:19 -0500
Re: Rolling MELFs
Paul Edwards
Fri, 27 Feb 2009 11:05:02 -0800
New Thread Safety question
Safety question
Bev Christian
Wed, 18 Feb 2009 21:01:56 -0500
Re: Safety question
Tan Geok Ang
Thu, 19 Feb 2009 18:15:22 +0800
Re: Safety question
Stadem, Richard D.
Thu, 19 Feb 2009 06:31:16 -0600
Re: Safety question
Randall L Bock
Thu, 19 Feb 2009 07:35:11 -0500
Re: Safety question
Pete Houwen
Thu, 19 Feb 2009 08:04:25 -0600
Re: Safety question
Kevin Glidden
Thu, 19 Feb 2009 10:55:20 -0500
Re: Safety question
Bev Christian
Mon, 23 Feb 2009 09:28:43 -0500
New Thread Selective Soldering design rules
Selective Soldering design rules
Jim Mosher
Mon, 23 Feb 2009 12:36:59 -0600
New Thread Sequencer Tape Suppliers?
Sequencer Tape Suppliers?
Steve Gregory
Fri, 6 Feb 2009 10:03:51 -0600
Re: Sequencer Tape Suppliers?
Steve Gregory
Fri, 6 Feb 2009 10:42:19 -0600
New Thread Soldering Alloy 260
Soldering Alloy 260
Ioan Tempea
Wed, 18 Feb 2009 09:38:59 -0500
Re: Soldering Alloy 260
David D. Hillman
Wed, 18 Feb 2009 11:55:23 -0600
Re: Soldering Alloy 260
Bob Willis
Thu, 19 Feb 2009 11:39:34 -0000
New Thread Staking Question/Help...
Staking Question/Help...
Steve Gregory
Wed, 11 Feb 2009 08:33:35 -0600
Re: Staking Question/Help...
keith Calhoun
Wed, 11 Feb 2009 09:47:30 -0500
Re: Staking Question/Help...
Kevin Glidden
Wed, 11 Feb 2009 09:55:32 -0500
Re: Staking Question/Help...
Kevin Glidden
Wed, 11 Feb 2009 09:59:00 -0500
Re: Staking Question/Help...
Fox, Ian
Wed, 11 Feb 2009 15:06:42 -0000
Re: Staking Question/Help...
Ian Hanna
Wed, 11 Feb 2009 10:17:08 -0500
Re: Staking Question/Help...
Temkin, Gregg
Wed, 11 Feb 2009 07:53:10 -0800
Re: Staking Question/Help...
Steve Gregory
Wed, 11 Feb 2009 12:52:43 -0600
Re: Staking Question/Help...
Kevin Glidden
Wed, 11 Feb 2009 13:59:53 -0500
New Thread Storage of Iag PWAs
Storage of Iag PWAs
Gary Camac
Mon, 2 Feb 2009 13:24:36 -0600
Re: Storage of Iag PWAs
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 07:14:58 -0700
Re: Storage of Iag PWAs
Dennis Fritz
Tue, 3 Feb 2009 11:12:57 -0500
Re: Storage of Iag PWAs
Gary Camac
Tue, 3 Feb 2009 12:49:20 -0600
Re: Storage of Iag PWAs
Stadem, Richard D.
Tue, 3 Feb 2009 13:28:27 -0600
New Thread Technical Reference for oceanic shipping
Technical Reference for oceanic shipping
Con Mọt Sách
Mon, 9 Feb 2009 22:56:25 +0700
Re: Technical Reference for oceanic shipping
Mike Sewell
Tue, 10 Feb 2009 11:16:18 -0600
Re: Technical Reference for oceanic shipping
Kevin Glidden
Tue, 10 Feb 2009 14:01:40 -0500
Re: Technical Reference for oceanic shipping
Kevin Glidden
Tue, 10 Feb 2009 14:14:22 -0500
Re: Technical Reference for oceanic shipping
Con Mọt Sách
Wed, 11 Feb 2009 21:25:00 +0700
New Thread Typical Cost difference between IPC-6012 Class 2 and Cla ss 3 boards
Re: Typical Cost difference between IPC-6012 Class 2 and Cla ss 3 boards
Stewart, Dougal
Thu, 5 Feb 2009 17:43:43 -0000
New Thread Typical Cost difference between IPC-6012 Class 2 and Class 3 boards
Typical Cost difference between IPC-6012 Class 2 and Class 3 boards
Bray, Anita (GE EntSol, Security)
Thu, 5 Feb 2009 11:42:37 -0500
Re: Typical Cost difference between IPC-6012 Class 2 and Class 3 boards
John Foster
Thu, 5 Feb 2009 09:04:00 -0800
Re: Typical Cost difference between IPC-6012 Class 2 and Class 3 boards
ROGER STOOPS
Thu, 5 Feb 2009 16:46:40 -0800
New Thread Ultrasonic cleaner for PCB
Ultrasonic cleaner for PCB
Ray Kong
Wed, 18 Feb 2009 15:19:06 -0800
Re: Ultrasonic cleaner for PCB
Stadem, Richard D.
Thu, 19 Feb 2009 06:13:19 -0600
Re: Ultrasonic cleaner for PCB
Leif Erik Laerum
Thu, 19 Feb 2009 07:55:32 -0600
Re: Ultrasonic cleaner for PCB
Stadem, Richard D.
Thu, 19 Feb 2009 08:54:45 -0600
Re: Ultrasonic cleaner for PCB
Stadem, Richard D.
Thu, 19 Feb 2009 08:57:57 -0600
Re: Ultrasonic cleaner for PCB
Stadem, Richard D.
Mon, 23 Feb 2009 08:36:11 -0600
New Thread UMICORE PASTE
Re: UMICORE PASTE
John Goulet
Mon, 2 Feb 2009 01:40:39 +0000
New Thread Vapor degreaser help
Vapor degreaser help
Ted Tontis
Wed, 4 Feb 2009 12:02:19 -0600
New Thread Vapor Phase Soldering
Re: Vapor Phase Soldering
Hernefjord Ingemar
Mon, 2 Feb 2009 09:07:41 +0100
Re: Vapor Phase Soldering
Hernefjord Ingemar
Mon, 2 Feb 2009 09:23:02 +0100
Re: Vapor Phase Soldering
Louis Hart
Mon, 2 Feb 2009 09:20:16 -0500
Re: Vapor Phase Soldering
Hernefjord Ingemar
Mon, 2 Feb 2009 16:00:30 +0100
Re: Vapor Phase Soldering
P. Langeveld
Tue, 3 Feb 2009 11:07:42 +0100
Re: Vapor Phase Soldering
Brian Ellis
Tue, 3 Feb 2009 14:52:30 +0200
Re: Vapor Phase Soldering
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 07:10:03 -0700
New Thread Virus Hoax
Virus Hoax
Robert Kondner
Tue, 17 Feb 2009 15:49:00 -0500
Re: Virus Hoax
Inge
Tue, 17 Feb 2009 22:34:00 +0100
Re: Virus Hoax
Phil Nutting
Tue, 17 Feb 2009 17:18:16 -0500
Re: Virus Hoax
Ken Bloomquist
Tue, 17 Feb 2009 14:49:45 -0800
Re: Virus Hoax
<>
Tue, 17 Feb 2009 17:59:12 EST
Re: Virus Hoax
Croslin, Robert
Wed, 18 Feb 2009 08:41:44 -0500
Re: Virus Hoax
Inge
Wed, 18 Feb 2009 22:30:44 +0100
New Thread Weird one - bismuth in overmold
Weird one - bismuth in overmold
Bev Christian
Thu, 26 Feb 2009 10:51:31 -0500
Re: Weird one - bismuth in overmold
Vladimir Igoshev
Thu, 26 Feb 2009 16:05:21 +0000
Re: Weird one - bismuth in overmold
Bev Christian
Thu, 26 Feb 2009 11:59:20 -0500
Re: Weird one - bismuth in overmold
Vladimir Igoshev
Thu, 26 Feb 2009 17:20:10 +0000
Re: Weird one - bismuth in overmold
David D. Hillman
Thu, 26 Feb 2009 11:23:37 -0600
Re: Weird one - bismuth in overmold
Bev Christian
Thu, 26 Feb 2009 12:30:34 -0500
Re: Weird one - bismuth in overmold
Vladimir Igoshev
Thu, 26 Feb 2009 17:37:01 +0000
Re: Weird one - bismuth in overmold
David D. Hillman
Thu, 26 Feb 2009 11:41:56 -0600
Re: Weird one - bismuth in overmold
Vladimir Igoshev
Thu, 26 Feb 2009 17:55:34 +0000
Re: Weird one - bismuth in overmold
Ken Bloomquist
Fri, 27 Feb 2009 07:23:58 -0800
Re: Weird one - bismuth in overmold
Ian Hanna
Fri, 27 Feb 2009 10:45:24 -0500
Re: Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 10:40:42 -0600
New Thread Where's the JCAA-JG-PP page?
Where's the JCAA-JG-PP page?
Ioan Tempea
Wed, 18 Feb 2009 08:18:17 -0500
Re: Where's the JCAA-JG-PP page?
Lee Whiteman
Wed, 18 Feb 2009 08:26:59 -0500
Re: Where's the JCAA-JG-PP page?
Ioan Tempea
Wed, 18 Feb 2009 08:32:41 -0500
Re: Where's the JCAA-JG-PP page?
David D. Hillman
Wed, 18 Feb 2009 07:36:22 -0600
Re: Where's the JCAA-JG-PP page?
Lee Whiteman
Wed, 18 Feb 2009 08:40:47 -0500
Re: Where's the JCAA-JG-PP page?
Ioan Tempea
Wed, 18 Feb 2009 08:52:22 -0500
New Thread Wire Bonding Dummy Parts
Wire Bonding Dummy Parts
bob wettermann
Thu, 26 Feb 2009 07:03:20 -0800
Re: Wire Bonding Dummy Parts
Scott Rougeux
Thu, 26 Feb 2009 09:21:06 -0600
Re: Wire Bonding Dummy Parts
Thayer, Wayne
Thu, 26 Feb 2009 12:40:01 -0500
Re: Wire Bonding Dummy Parts
Steven Creswick
Fri, 27 Feb 2009 10:49:14 -0500
New Thread Workmanship criteria for ipass connector
Workmanship criteria for ipass connector
Rudolph yu
Wed, 11 Feb 2009 07:22:51 +0000
Re: Workmanship criteria for ipass connector
Guy Ramsey
Wed, 11 Feb 2009 16:03:43 -0500
Re: Workmanship criteria for ipass connector
John Goulet
Sun, 15 Feb 2009 04:12:37 +0000
New Thread [NTC] Cool New Google Tool
[NTC] Cool New Google Tool
Ken Bloomquist
Wed, 11 Feb 2009 12:39:39 -0800
Re: [NTC] Cool New Google Tool
Pete Houwen
Wed, 18 Feb 2009 08:59:54 -0600
New Thread [NTC] Repair soldermask
Re: [NTC] Repair soldermask
Ken Bloomquist
Fri, 20 Feb 2009 07:57:15 -0800
New Thread [TC] [IPC-600-6012] Microvias
Re: [TC] [IPC-600-6012] Microvias
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 07:39:03 -0700
Re: [TC] [IPC-600-6012] Microvias
Stewart, Dougal
Mon, 23 Feb 2009 14:47:15 -0000
New Thread [tinwhiskers] - RoHS & BGAs!!!
Re: [tinwhiskers] - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 11:52:47 -0500
Re: [tinwhiskers] - RoHS & BGAs!!!
Inge
Fri, 13 Feb 2009 19:19:20 +0100
Re: [tinwhiskers] - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 13:26:36 -0500
New Thread [tinwhiskers] Re: - RoHS & BGAs!!!
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 12:56:43 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 13:24:17 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
John Burke
Fri, 13 Feb 2009 11:26:51 -0800
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 15:19:19 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
John Burke
Fri, 13 Feb 2009 12:34:21 -0800
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 15:39:20 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Ian Hanna
Fri, 13 Feb 2009 15:50:12 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
John Burke
Fri, 13 Feb 2009 12:49:56 -0800
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 16:14:36 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Stadem, Richard D.
Mon, 16 Feb 2009 09:00:53 -0600
New Thread [tinwhiskers] Re: Bourns announces hot dipping of tin - comments?
Re: [tinwhiskers] Re: Bourns announces hot dipping of tin - comments?
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 11:00:03 -0700
New Thread [TN] CRACKED ENIG PADS
FW: [TN] CRACKED ENIG PADS
Victor Hernandez
Wed, 11 Feb 2009 14:55:21 -0600
New Thread [TN] NTC anti-this-and-that programs
Fw: [TN] NTC anti-this-and-that programs
Joyce Koo
Sun, 15 Feb 2009 15:13:06 -0500

ATOM RSS1 RSS2