TECHNET Archives

February 2009

TechNet@IPC.ORG
Options: Hide Table of Contents

鸿 金 (1 Message)
<> (1 Message)
Ahne Oosterhof (2 Messages)
ALLEN, LOA (1 Message)
Andy Price (1 Message)
Anne Marie Mulvihill (1 Message)
Anslow, Phillip (UK) (1 Message)
Aquino Quek (1 Message)
Barbara Burcham (2 Messages)
Bev Christian (24 Messages)
Bill Kunkle (1 Message)
Bob METCALF (1 Message)
bob wettermann (2 Messages)
Bob Willis (9 Messages)
Bray, Anita (GE EntSol, Security) (1 Message)
Brian Chandler (1 Message)
Brian Ellis (11 Messages)
Carl VanWormer (4 Messages)
Charlie Pitarys (1 Message)
Chris Knudsen (1 Message)
Con Mọt Sách (2 Messages)
Cong He (1 Message)
Craig Sullivan (3 Messages)
Croslin, Robert (3 Messages)
Dave Dixon (3 Messages)
David Baldwin (1 Message)
David D. Hillman (19 Messages)
David Tremmel (1 Message)
Deac Descoteaux (2 Messages)
Dennis Fritz (5 Messages)
Douglas Pauls (8 Messages)
Dwight Mattix (6 Messages)
EIMCNews (1 Message)
Eric CHRISTISON (1 Message)
Fox, Ian (1 Message)
Gabriela (1 Message)
Gary Camac (2 Messages)
Gen Gibbard (1 Message)
Genny Gibbard (1 Message)
Gervascio, Thomas L (2 Messages)
Goulet mail (1 Message)
Graham Collins (13 Messages)
Graham Naisbitt (5 Messages)
Grunde Gjertsen (2 Messages)
Gumpert, Ben (1 Message)
Guy Ramsey (4 Messages)
Hernefjord Ingemar (6 Messages)
Ian Hanna (5 Messages)
Inge (30 Messages)
Ioan Tempea (11 Messages)
Jac Kroeker (2 Messages)
Jack Olson (4 Messages)
James Head (2 Messages)
jckim(김정철) (2 Messages)
Jean-François Bissonnette (2 Messages)
Jerry Dengler (3 Messages)
Jim Mosher (1 Message)
Joe Fjelstad (9 Messages)
Joe Macko (3 Messages)
Joe Venditti (1 Message)
John Anselmo (4 Messages)
John Burke (9 Messages)
John Foster (3 Messages)
John Goulet (6 Messages)
John Parsons (3 Messages)
jonathan noquil (1 Message)
Joyce Koo (18 Messages)
Juan T. Marugán (1 Message)
Kane, Amol (349) (1 Message)
Kane, Joseph E (US SSA) (1 Message)
Karen Tellefsen (8 Messages)
Keith Calhoun (3 Messages)
Kelly Morris (1 Message)
Ken Bloomquist (11 Messages)
Kevin Glidden (10 Messages)
Kim Sparrow (1 Message)
Kim Sterling (1 Message)
Lee parker (1 Message)
Lee Whiteman (11 Messages)
legg (1 Message)
Leif Erik Laerum (2 Messages)
Leigh-Ann Litavis (1 Message)
Leland Woodall (2 Messages)
Liu, Edwin (4 Messages)
Louis Hart (2 Messages)
Lum Wee Mei (1 Message)
Matthias Mansfeld (1 Message)
Michael Holz (1 Message)
Michelle Michelotti (3 Messages)
Mike Fenner (11 Messages)
Mike Sewell (3 Messages)
Miller, Rodney (4 Messages)
Nivens, Carl W (US SSA) (1 Message)
Olav Folland (1 Message)
P. Langeveld (3 Messages)
Paul Edwards (3 Messages)
Paul Reid (5 Messages)
Pete Houwen (4 Messages)
Phil Nutting (6 Messages)
Randall L Bock (3 Messages)
Randy Morrison (1 Message)
Ray Kong (1 Message)
Richard Kraszewski (5 Messages)
Robert Kondner (13 Messages)
Roberts, Jon (1 Message)
ROGER STOOPS (2 Messages)
Rudolph yu (1 Message)
Scott Rougeux (1 Message)
Scott Westheimer (1 Message)
Simonik, Dave R. (David) (1 Message)
Stadem, Richard D. (35 Messages)
Steve Gregory (16 Messages)
Steve Kelly (1 Message)
Steve Smith (1 Message)
Steven Creswick (7 Messages)
Stewart, Dougal (3 Messages)
Sunny Liu (1 Message)
Tan Geok Ang (2 Messages)
Ted Tontis (18 Messages)
Temkin, Gregg (1 Message)
Thayer, Wayne (9 Messages)
Tina Nerad (2 Messages)
Tom Burek (3 Messages)
Upton, Shawn (3 Messages)
Victor Hernandez (6 Messages)
Vladimir Igoshev (14 Messages)
Wenger, George M. (2 Messages)
Werner engelmaier (28 Messages)
Whittaker, Dewey (EHCOE) (22 Messages)
Wilson, Bob (2 Messages)
Wolfgang Erat (1 Message)
Woolley, Mark D. (Mark) (1 Message)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender 鸿 金
Re: Earl Moon
鸿 金
Sat, 7 Feb 2009 17:10:09 +0800
New Sender <>
Re: Virus Hoax
<>
Tue, 17 Feb 2009 17:59:12 EST
New Sender Ahne Oosterhof
Re: Apex Expo
Ahne Oosterhof
Tue, 3 Feb 2009 16:57:41 -0800
Re: Maybe not counterfeit, but definitely weird!
Ahne Oosterhof
Wed, 4 Feb 2009 15:33:33 -0800
New Sender ALLEN, LOA
Re: NTC - Weird one - bismuth in overmold
ALLEN, LOA
Fri, 27 Feb 2009 11:43:49 -0800
New Sender Andy Price
Re: Repair soldermask
Andy Price
Fri, 20 Feb 2009 09:43:40 -0500
New Sender Anne Marie Mulvihill
Last call for Lead-Free Conference Mar 3-5
Anne Marie Mulvihill
Tue, 24 Feb 2009 11:23:17 -0600
New Sender Anslow, Phillip (UK)
Re: CONFLICT: IPC-2223B and IPC-6013A
Anslow, Phillip (UK)
Fri, 6 Feb 2009 11:30:57 -0000
New Sender Aquino Quek
hi:
Aquino Quek
Mon, 16 Feb 2009 05:25:20 +0800
New Sender Barbara Burcham
Re: Hello everybody
Barbara Burcham
Thu, 12 Feb 2009 08:45:30 -0600
Re: Jumper wire forming for fine pitch QFP?
Barbara Burcham
Mon, 2 Feb 2009 08:56:15 -0600
New Sender Bev Christian
Access
Bev Christian
Thu, 12 Feb 2009 11:56:56 -0500
Re: Apex Expo
Bev Christian
Mon, 2 Feb 2009 16:24:46 -0500
Copper Mirror Test
Bev Christian
Wed, 11 Feb 2009 15:56:48 -0500
Re: Copper Mirror Test
Bev Christian
Fri, 13 Feb 2009 11:35:34 -0500
Re: Counterfeit components market data
Bev Christian
Mon, 9 Feb 2009 13:28:55 -0500
Re: Counterfeit components market data
Bev Christian
Mon, 9 Feb 2009 13:51:58 -0500
Re: CRACKED ENIG PADS
Bev Christian
Wed, 11 Feb 2009 16:01:40 -0500
Hot Slump
Bev Christian
Thu, 19 Feb 2009 15:41:00 -0500
Re: Hot Slump
Bev Christian
Fri, 20 Feb 2009 08:04:16 -0500
Re: In Search of a Technical Reference
Bev Christian
Thu, 5 Feb 2009 17:19:50 -0500
Re: Leadfree has gone too far.
Bev Christian
Tue, 17 Feb 2009 12:37:07 -0500
Re: Leadfree has gone too far.
Bev Christian
Tue, 17 Feb 2009 14:27:47 -0500
Re: Maybe not counterfeit, but definitely weird!
Bev Christian
Wed, 4 Feb 2009 17:00:24 -0500
Re: Maybe not counterfeit, but definitely weird!
Bev Christian
Wed, 4 Feb 2009 18:40:00 -0500
Re: NTC [TN] In Search of a Technical Reference
Bev Christian
Sat, 7 Feb 2009 20:37:15 -0500
Re: REACH legislation? How's it going?
Bev Christian
Tue, 3 Feb 2009 07:52:19 -0500
Re: Repair soldermask
Bev Christian
Fri, 20 Feb 2009 09:51:53 -0500
Re: Repair soldermask
Bev Christian
Fri, 20 Feb 2009 10:19:14 -0500
Re: RoHS list
Bev Christian
Sun, 8 Feb 2009 17:35:30 -0500
Safety question
Bev Christian
Wed, 18 Feb 2009 21:01:56 -0500
Re: Safety question
Bev Christian
Mon, 23 Feb 2009 09:28:43 -0500
Weird one - bismuth in overmold
Bev Christian
Thu, 26 Feb 2009 10:51:31 -0500
Re: Weird one - bismuth in overmold
Bev Christian
Thu, 26 Feb 2009 11:59:20 -0500
Re: Weird one - bismuth in overmold
Bev Christian
Thu, 26 Feb 2009 12:30:34 -0500
New Sender Bill Kunkle
Re: BGA stencil aperture design guidelines
Bill Kunkle
Thu, 12 Feb 2009 13:37:52 -0500
New Sender Bob METCALF
Re: Recommendation for a rapid prototype PCB fabricator
Bob METCALF
Mon, 9 Feb 2009 13:55:57 -0800
New Sender bob wettermann
Re: Repair soldermask
bob wettermann
Fri, 20 Feb 2009 08:58:50 -0800
Wire Bonding Dummy Parts
bob wettermann
Thu, 26 Feb 2009 07:03:20 -0800
New Sender Bob Willis
Conformal Coating Inspection
Bob Willis
Fri, 20 Feb 2009 15:52:19 -0000
Re: Conformal Coating Inspection
Bob Willis
Fri, 20 Feb 2009 18:44:41 -0000
Re: Conformal Coating Inspection
Bob Willis
Mon, 23 Feb 2009 16:50:03 -0000
Re: Conformal Coating Inspection
Bob Willis
Mon, 23 Feb 2009 18:26:35 -0000
Re: CRACKED ENIG PADS
Bob Willis
Thu, 12 Feb 2009 16:17:59 -0000
Re: Flex Carrier?
Bob Willis
Thu, 26 Feb 2009 08:03:04 -0000
Re: Flex Carrier?
Bob Willis
Fri, 27 Feb 2009 08:12:24 -0000
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Bob Willis
Fri, 27 Feb 2009 18:54:16 -0000
Re: Soldering Alloy 260
Bob Willis
Thu, 19 Feb 2009 11:39:34 -0000
New Sender Bray, Anita (GE EntSol, Security)
Typical Cost difference between IPC-6012 Class 2 and Class 3 boards
Bray, Anita (GE EntSol, Security)
Thu, 5 Feb 2009 11:42:37 -0500
New Sender Brian Chandler
2-D Laser Etch Barcodes on PCBs
Brian Chandler
Thu, 12 Feb 2009 09:52:47 -0600
New Sender Brian Ellis
Re: Conformal Coating Inspection
Brian Ellis
Fri, 20 Feb 2009 18:00:20 +0200
Re: dewetting
Brian Ellis
Thu, 19 Feb 2009 19:02:29 +0200
Re: dewetting
Brian Ellis
Fri, 20 Feb 2009 11:08:21 +0200
Re: hi:
Brian Ellis
Mon, 16 Feb 2009 09:54:25 +0200
Re: In Search of a Technical Reference
Brian Ellis
Fri, 6 Feb 2009 09:29:33 +0200
Re: In Search of a Technical Reference
Brian Ellis
Fri, 6 Feb 2009 16:29:07 +0200
Re: In Search of a Technical Reference
Brian Ellis
Sun, 8 Feb 2009 11:09:30 +0200
Re: Leadfree has gone too far.
Brian Ellis
Tue, 17 Feb 2009 18:14:58 +0200
Re: No Clean that can be removed?
Brian Ellis
Mon, 2 Feb 2009 10:17:36 +0200
Re: Questionnaire
Brian Ellis
Mon, 16 Feb 2009 17:21:47 +0200
Re: Vapor Phase Soldering
Brian Ellis
Tue, 3 Feb 2009 14:52:30 +0200
New Sender Carl VanWormer
Capacitor construction - foil alloy question
Carl VanWormer
Mon, 16 Feb 2009 06:46:44 -0800
Re: Capacitor construction - foil alloy question
Carl VanWormer
Mon, 16 Feb 2009 16:24:13 -0800
Looking for test fixture quick release snap-in hold-down clamp
Carl VanWormer
Thu, 5 Feb 2009 07:25:55 -0800
Re: Looking for test fixture quick release snap-in hold-down clamp
Carl VanWormer
Thu, 5 Feb 2009 14:48:13 -0800
New Sender Charlie Pitarys
Re: Leadfree has gone too far.
Charlie Pitarys
Wed, 18 Feb 2009 16:38:45 -0600
New Sender Chris Knudsen
Re: Questionnaire
Chris Knudsen
Tue, 17 Feb 2009 09:17:43 -0500
New Sender Con Mọt Sách
Technical Reference for oceanic shipping
Con Mọt Sách
Mon, 9 Feb 2009 22:56:25 +0700
Re: Technical Reference for oceanic shipping
Con Mọt Sách
Wed, 11 Feb 2009 21:25:00 +0700
New Sender Cong He
PCB'S minimum line width
Cong He
Tue, 17 Feb 2009 10:07:56 +0800
New Sender Craig Sullivan
Re: 2141A errata microstrip equation
Craig Sullivan
Thu, 19 Feb 2009 09:17:11 -0500
Fab house audit guideline/template
Craig Sullivan
Fri, 27 Feb 2009 09:55:46 -0600
Re: Fab house audit guideline/template
Craig Sullivan
Fri, 27 Feb 2009 11:39:57 -0500
New Sender Croslin, Robert
Re: LPIM
Croslin, Robert
Tue, 10 Feb 2009 11:46:23 -0500
Re: Questionnaire
Croslin, Robert
Tue, 17 Feb 2009 11:12:34 -0500
Re: Virus Hoax
Croslin, Robert
Wed, 18 Feb 2009 08:41:44 -0500
New Sender Dave Dixon
Re: Leadfree has gone too far.
Dave Dixon
Tue, 17 Feb 2009 09:47:39 -0600
Re: Maybe not counterfeit, but definitely weird!
Dave Dixon
Wed, 4 Feb 2009 16:10:19 -0600
Re: Recommendation for a rapid prototype PCB fabricator
Dave Dixon
Mon, 9 Feb 2009 08:22:14 -0600
New Sender David Baldwin
Re: Leadfree has gone too far.
David Baldwin
Tue, 17 Feb 2009 07:47:51 -0700
New Sender David D. Hillman
Re: CRACKED ENIG PADS
David D. Hillman
Wed, 11 Feb 2009 16:33:00 -0600
Re: dewetting
David D. Hillman
Thu, 19 Feb 2009 11:28:42 -0600
Re: ENIS
David D. Hillman
Thu, 12 Feb 2009 09:05:35 -0600
In Search of a Technical Reference
David D. Hillman
Thu, 5 Feb 2009 16:18:41 -0600
Re: In Search of a Technical Reference
David D. Hillman
Fri, 6 Feb 2009 07:38:31 -0600
Re: Lead Free solder compatibility
David D. Hillman
Mon, 16 Feb 2009 13:44:18 -0600
Re: Leadfree has gone too far.
David D. Hillman
Tue, 17 Feb 2009 09:26:45 -0600
Re: Local Solder Dross Recovery & solder joint reliability
David D. Hillman
Wed, 11 Feb 2009 16:53:15 -0600
Re: microscopes
David D. Hillman
Fri, 13 Feb 2009 12:59:49 -0600
Re: NTC - Weird one - bismuth in overmold
David D. Hillman
Fri, 27 Feb 2009 10:52:22 -0600
Re: Part solderability
David D. Hillman
Fri, 6 Feb 2009 18:02:58 -0600
Re: Part solderability
David D. Hillman
Mon, 9 Feb 2009 07:47:26 -0600
Re: Part solderability
David D. Hillman
Mon, 9 Feb 2009 08:28:57 -0600
Re: Part solderability
David D. Hillman
Tue, 10 Feb 2009 08:42:27 -0600
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
David D. Hillman
Fri, 27 Feb 2009 10:43:43 -0600
Re: Soldering Alloy 260
David D. Hillman
Wed, 18 Feb 2009 11:55:23 -0600
Re: Weird one - bismuth in overmold
David D. Hillman
Thu, 26 Feb 2009 11:23:37 -0600
Re: Weird one - bismuth in overmold
David D. Hillman
Thu, 26 Feb 2009 11:41:56 -0600
Re: Where's the JCAA-JG-PP page?
David D. Hillman
Wed, 18 Feb 2009 07:36:22 -0600
New Sender David Tremmel
BGA testing sockets
David Tremmel
Thu, 19 Feb 2009 21:08:06 +0000
New Sender Deac Descoteaux
Re: Leadfree has gone too far.
Deac Descoteaux
Tue, 17 Feb 2009 07:23:30 -0800
Re: Questionnaire
Deac Descoteaux
Mon, 16 Feb 2009 05:47:08 -0800
New Sender Dennis Fritz
Re: Capacitor construction - foil alloy question
Dennis Fritz
Mon, 16 Feb 2009 19:00:54 -0500
Re: Leadfree has gone too far.
Dennis Fritz
Tue, 17 Feb 2009 11:30:47 -0500
Re: NTC - Weird one - bismuth in overmold
Dennis Fritz
Fri, 27 Feb 2009 14:20:14 -0500
Re: PCB'S minimum line width
Dennis Fritz
Wed, 18 Feb 2009 19:17:39 -0500
Re: Storage of Iag PWAs
Dennis Fritz
Tue, 3 Feb 2009 11:12:57 -0500
New Sender Douglas Pauls
Re: Apex Expo
Douglas Pauls
Wed, 4 Feb 2009 11:29:48 -0600
Re: Apex Expo
Douglas Pauls
Wed, 4 Feb 2009 11:54:19 -0600
Re: Coating material
Douglas Pauls
Thu, 5 Feb 2009 16:32:41 -0600
Re: Coating material
Douglas Pauls
Fri, 6 Feb 2009 10:28:38 -0600
Re: IPC-CC-830
Douglas Pauls
Fri, 13 Feb 2009 17:02:06 -0600
Re: IPC-CC-830
Douglas Pauls
Wed, 25 Feb 2009 13:13:03 -0600
Re: NTC - Weird one - bismuth in overmold
Douglas Pauls
Fri, 27 Feb 2009 11:28:02 -0600
Re: NTC - Weird one - bismuth in overmold
Douglas Pauls
Fri, 27 Feb 2009 11:53:42 -0600
New Sender Dwight Mattix
Re: CRACKED ENIG PADS
Dwight Mattix
Thu, 12 Feb 2009 13:17:14 -0800
Re: CRACKED ENIG PADS
Dwight Mattix
Fri, 13 Feb 2009 07:23:21 -0800
Re: Leadfree has gone too far.
Dwight Mattix
Tue, 17 Feb 2009 10:06:33 -0800
Re: Leadfree has gone too far.
Dwight Mattix
Tue, 17 Feb 2009 10:07:29 -0800
Re: Leadfree has gone too far.
Dwight Mattix
Tue, 17 Feb 2009 10:09:01 -0800
Re: Leadfree has gone too far.
Dwight Mattix
Tue, 17 Feb 2009 11:04:45 -0800
New Sender EIMCNews
Re: Earl Moon
EIMCNews
Thu, 5 Feb 2009 12:40:24 -0800
New Sender Eric CHRISTISON
Re: Leadfree has gone too far.
Eric CHRISTISON
Tue, 17 Feb 2009 15:24:26 +0000
New Sender Fox, Ian
Re: Staking Question/Help...
Fox, Ian
Wed, 11 Feb 2009 15:06:42 -0000
New Sender Gabriela
Re: Repair soldermask
Gabriela
Fri, 20 Feb 2009 19:51:09 +0200
New Sender Gary Camac
Storage of Iag PWAs
Gary Camac
Mon, 2 Feb 2009 13:24:36 -0600
Re: Storage of Iag PWAs
Gary Camac
Tue, 3 Feb 2009 12:49:20 -0600
New Sender Gen Gibbard
Apex Expo
Gen Gibbard
Mon, 2 Feb 2009 12:38:10 -0800
New Sender Genny Gibbard
Re: NTC - Weird one - bismuth in overmold
Genny Gibbard
Fri, 27 Feb 2009 10:56:24 -0600
New Sender Gervascio, Thomas L
BGA stencil aperture design guidelines
Gervascio, Thomas L
Wed, 11 Feb 2009 15:20:36 -0500
Rolling MELFs
Gervascio, Thomas L
Fri, 27 Feb 2009 13:59:19 -0500
New Sender Goulet mail
Re: Looking for manufacturer of air bag deployment modules
Goulet mail
Thu, 5 Feb 2009 06:19:15 -0500
New Sender Graham Collins
Re: Conformal coating or encapsulating
Graham Collins
Thu, 26 Feb 2009 13:05:51 -0400
Jumper wire forming for fine pitch QFP?
Graham Collins
Mon, 2 Feb 2009 08:59:05 -0400
Re: Jumper wire forming for fine pitch QFP?
Graham Collins
Mon, 2 Feb 2009 10:02:52 -0400
Re: Leadfree has gone too far.
Graham Collins
Tue, 17 Feb 2009 11:22:39 -0400
Re: Leadfree has gone too far.
Graham Collins
Tue, 17 Feb 2009 11:29:59 -0400
Re: Leadfree has gone too far.
Graham Collins
Tue, 17 Feb 2009 11:36:41 -0400
NTC RE: [TN] Hello everybody
Graham Collins
Thu, 12 Feb 2009 11:21:03 -0400
Part solderability
Graham Collins
Fri, 6 Feb 2009 10:12:23 -0400
Re: Part solderability
Graham Collins
Fri, 6 Feb 2009 10:18:10 -0400
Re: Part solderability
Graham Collins
Fri, 6 Feb 2009 11:18:37 -0400
Re: Part solderability
Graham Collins
Mon, 9 Feb 2009 07:39:20 -0400
Re: Part solderability
Graham Collins
Mon, 9 Feb 2009 13:57:53 -0400
Re: Part solderability
Graham Collins
Tue, 10 Feb 2009 10:23:09 -0400
New Sender Graham Naisbitt
Re: Apex Expo
Graham Naisbitt
Tue, 3 Feb 2009 12:23:02 +0000
Re: Apex Expo
Graham Naisbitt
Tue, 3 Feb 2009 15:39:53 +0000
Re: Hot Slump
Graham Naisbitt
Fri, 20 Feb 2009 12:41:16 +0000
Re: Hot Slump
Graham Naisbitt
Fri, 20 Feb 2009 13:31:18 +0000
Re: NTC anti-this-and-that programs
Graham Naisbitt
Mon, 16 Feb 2009 11:28:09 +0000
New Sender Grunde Gjertsen
Re: Coating material
Grunde Gjertsen
Fri, 6 Feb 2009 09:00:47 +0100
Re: Coating material
Grunde Gjertsen
Tue, 10 Feb 2009 14:14:46 +0100
New Sender Gumpert, Ben
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Gumpert, Ben
Fri, 27 Feb 2009 11:28:14 -0500
New Sender Guy Ramsey
Re: Bridging on SMD Connector
Guy Ramsey
Mon, 2 Feb 2009 15:56:23 -0500
Re: Bridging on SMD Connector
Guy Ramsey
Tue, 3 Feb 2009 07:29:22 -0500
Re: Hello everybody
Guy Ramsey
Thu, 12 Feb 2009 10:11:27 -0500
Re: Workmanship criteria for ipass connector
Guy Ramsey
Wed, 11 Feb 2009 16:03:43 -0500
New Sender Hernefjord Ingemar
Re: Capacitor construction - foil alloy question
Hernefjord Ingemar
Tue, 17 Feb 2009 13:50:58 +0100
Re: Ceramic Core PCBs
Hernefjord Ingemar
Tue, 24 Feb 2009 08:35:05 +0100
Re: dewetting
Hernefjord Ingemar
Mon, 23 Feb 2009 10:19:11 +0100
Re: Vapor Phase Soldering
Hernefjord Ingemar
Mon, 2 Feb 2009 09:07:41 +0100
Re: Vapor Phase Soldering
Hernefjord Ingemar
Mon, 2 Feb 2009 09:23:02 +0100
Re: Vapor Phase Soldering
Hernefjord Ingemar
Mon, 2 Feb 2009 16:00:30 +0100
New Sender Ian Hanna
Re: Apex Expo
Ian Hanna
Wed, 4 Feb 2009 12:35:30 -0500
Re: NTC anti-this-and-that programs
Ian Hanna
Fri, 13 Feb 2009 15:49:21 -0500
Re: Staking Question/Help...
Ian Hanna
Wed, 11 Feb 2009 10:17:08 -0500
Re: Weird one - bismuth in overmold
Ian Hanna
Fri, 27 Feb 2009 10:45:24 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Ian Hanna
Fri, 13 Feb 2009 15:50:12 -0500
New Sender Inge
Re: Coating material
Inge
Sat, 7 Feb 2009 23:59:38 +0100
Re: Counterfeit components market data
Inge
Mon, 9 Feb 2009 21:34:57 +0100
Re: CRACKED ENIG PADS
Inge
Wed, 11 Feb 2009 20:51:02 +0100
Re: CRACKED ENIG PADS
Inge
Wed, 11 Feb 2009 21:50:06 +0100
Re: In Search of a Technical Reference
Inge
Sun, 8 Feb 2009 00:50:34 +0100
Re: lead adding
Inge
Mon, 9 Feb 2009 22:01:40 +0100
Re: Leadfree has gone too far.
Inge
Tue, 17 Feb 2009 20:15:43 +0100
Re: Maybe not counterfeit, but definitely weird!
Inge
Thu, 5 Feb 2009 09:15:12 +0100
Re: microscopes
Inge
Fri, 13 Feb 2009 19:30:01 +0100
Re: Moisture Content of PWB's for Assembly?
Inge
Mon, 9 Feb 2009 21:39:24 +0100
NTC anti-this-and-that programs
Inge
Fri, 13 Feb 2009 20:06:04 +0100
Re: NTC anti-this-and-that programs
Inge
Fri, 13 Feb 2009 21:50:49 +0100
Re: NTC anti-this-and-that programs
Inge
Sat, 14 Feb 2009 18:09:12 +0100
Re: NTC anti-this-and-that programs
Inge
Sat, 14 Feb 2009 21:13:02 +0100
Re: NTC anti-this-and-that programs
Inge
Sun, 15 Feb 2009 11:17:41 +0100
Re: NTC anti-this-and-that programs
Inge
Sun, 15 Feb 2009 23:16:34 +0100
Re: NTC anti-this-and-that programs
Inge
Tue, 17 Feb 2009 18:13:29 +0100
Re: NTC anti-this-and-that programs
Inge
Tue, 17 Feb 2009 20:40:07 +0100
Re: NTC Look Out!
Inge
Mon, 9 Feb 2009 22:25:04 +0100
Re: Part solderability
Inge
Sun, 8 Feb 2009 18:13:14 +0100
Re: Part solderability
Inge
Sun, 8 Feb 2009 19:04:01 +0100
Re: Part solderability
Inge
Mon, 9 Feb 2009 21:30:33 +0100
robotic dispensing
Inge
Mon, 9 Feb 2009 21:53:41 +0100
Re: robotic dispensing
Inge
Mon, 9 Feb 2009 22:19:45 +0100
Re: robotic dispensing
Inge
Mon, 9 Feb 2009 22:46:58 +0100
Re: robotic dispensing
Inge
Mon, 9 Feb 2009 22:53:45 +0100
RoHS list
Inge
Sun, 8 Feb 2009 23:09:06 +0100
Re: Virus Hoax
Inge
Tue, 17 Feb 2009 22:34:00 +0100
Re: Virus Hoax
Inge
Wed, 18 Feb 2009 22:30:44 +0100
Re: [tinwhiskers] - RoHS & BGAs!!!
Inge
Fri, 13 Feb 2009 19:19:20 +0100
New Sender Ioan Tempea
Re: Apex Expo
Ioan Tempea
Mon, 2 Feb 2009 16:00:47 -0500
Re: Bridging on SMD Connector
Ioan Tempea
Mon, 2 Feb 2009 16:08:31 -0500
Earl Moon
Ioan Tempea
Wed, 4 Feb 2009 07:57:21 -0500
Re: Earl Moon
Ioan Tempea
Wed, 4 Feb 2009 08:21:14 -0500
Re: Earl Moon
Ioan Tempea
Thu, 5 Feb 2009 15:44:42 -0500
ENIS
Ioan Tempea
Thu, 12 Feb 2009 09:27:39 -0500
Repair soldermask
Ioan Tempea
Fri, 20 Feb 2009 08:47:01 -0500
Soldering Alloy 260
Ioan Tempea
Wed, 18 Feb 2009 09:38:59 -0500
Where's the JCAA-JG-PP page?
Ioan Tempea
Wed, 18 Feb 2009 08:18:17 -0500
Re: Where's the JCAA-JG-PP page?
Ioan Tempea
Wed, 18 Feb 2009 08:32:41 -0500
Re: Where's the JCAA-JG-PP page?
Ioan Tempea
Wed, 18 Feb 2009 08:52:22 -0500
New Sender Jac Kroeker
Re: Recommendation for a rapid prototype PCB fabricator
Jac Kroeker
Mon, 9 Feb 2009 09:09:10 -0800
Re: Recommendation for a rapid prototype PCB fabricator
Jac Kroeker
Mon, 9 Feb 2009 12:16:23 -0800
New Sender Jack Olson
Earl Moon
Jack Olson
Thu, 5 Feb 2009 14:28:21 -0600
Re: Earl Moon
Jack Olson
Thu, 5 Feb 2009 14:51:29 -0600
Re: Permissible current and voltage in PCB
Jack Olson
Fri, 13 Feb 2009 08:55:10 -0600
Re: Permissible current and voltage in PCB
Jack Olson
Fri, 13 Feb 2009 09:27:26 -0600
New Sender James Head
Re: Leadfree has gone too far.
James Head
Tue, 17 Feb 2009 15:33:41 -0000
Re: Questionnaire
James Head
Mon, 16 Feb 2009 14:31:53 -0000
New Sender jckim(김정철)
Permissible current and voltage in PCB
jckim(김정철)
Fri, 13 Feb 2009 10:07:46 +0900
Re: Permissible current and voltage in PCB
jckim(김정철)
Mon, 16 Feb 2009 11:18:18 +0900
New Sender Jean-François Bissonnette
IPC-CC-830
Jean-François Bissonnette
Fri, 13 Feb 2009 16:38:30 -0500
Re: IPC-CC-830
Jean-François Bissonnette
Wed, 25 Feb 2009 11:51:58 -0500
New Sender Jerry Dengler
Re: Counterfeit components market data
Jerry Dengler
Mon, 9 Feb 2009 13:29:35 -0500
Re: Misprints
Jerry Dengler
Thu, 19 Feb 2009 09:35:37 -0500
Re: Recommendation for a rapid prototype PCB fabricator
Jerry Dengler
Mon, 9 Feb 2009 09:08:35 -0500
New Sender Jim Mosher
Selective Soldering design rules
Jim Mosher
Mon, 23 Feb 2009 12:36:59 -0600
New Sender Joe Fjelstad
Re: Apex Expo
Joe Fjelstad
Mon, 2 Feb 2009 16:36:45 -0500
Re: Apex Expo
Joe Fjelstad
Mon, 2 Feb 2009 16:46:40 -0500
Re: Earl Moon
Joe Fjelstad
Wed, 4 Feb 2009 12:38:38 EST
Re: Flex Carrier?
Joe Fjelstad
Thu, 26 Feb 2009 11:13:16 EST
Re: lead adding
Joe Fjelstad
Mon, 9 Feb 2009 17:45:46 EST
Re: lead adding
Joe Fjelstad
Mon, 9 Feb 2009 19:26:09 EST
Re: lead adding
Joe Fjelstad
Mon, 9 Feb 2009 20:13:52 EST
Re: Leadfree has gone too far.
Joe Fjelstad
Tue, 17 Feb 2009 10:49:41 EST
Re: Leadfree has gone too far.
Joe Fjelstad
Tue, 17 Feb 2009 12:25:09 EST
New Sender Joe Macko
Re: IPC-CC-830
Joe Macko
Tue, 17 Feb 2009 07:06:41 -0800
JEDEC STD 22-A113 question
Joe Macko
Mon, 9 Feb 2009 08:49:23 -0800
Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Joe Macko
Fri, 27 Feb 2009 08:03:39 -0800
New Sender Joe Venditti
Re: Recommendation for a rapid prototype PCB fabricator
Joe Venditti
Mon, 9 Feb 2009 09:15:53 -0500
New Sender John Anselmo
Bridging on SMD Connector
John Anselmo
Mon, 2 Feb 2009 12:49:33 -0700
Re: Bridging on SMD Connector
John Anselmo
Mon, 2 Feb 2009 15:24:45 -0700
Re: Bridging on SMD Connector
John Anselmo
Mon, 2 Feb 2009 15:29:32 -0700
Re: Bridging on SMD Connector
John Anselmo
Mon, 2 Feb 2009 17:24:28 -0700
New Sender John Burke
Re: Conformal Coating Inspection
John Burke
Mon, 23 Feb 2009 11:38:23 -0800
Counterfeit components market data
John Burke
Mon, 9 Feb 2009 10:22:17 -0800
Re: CRACKED ENIG PADS
John Burke
Wed, 11 Feb 2009 13:15:04 -0800
Re: NTC anti-this-and-that programs
John Burke
Fri, 13 Feb 2009 14:43:36 -0800
Re: Part solderability
John Burke
Sun, 8 Feb 2009 17:49:25 -0800
Re: RoHS list
John Burke
Sun, 8 Feb 2009 18:40:17 -0800
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
John Burke
Fri, 13 Feb 2009 11:26:51 -0800
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
John Burke
Fri, 13 Feb 2009 12:34:21 -0800
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
John Burke
Fri, 13 Feb 2009 12:49:56 -0800
New Sender John Foster
microscopes
John Foster
Fri, 13 Feb 2009 10:01:34 -0800
Re: Questionnaire
John Foster
Mon, 16 Feb 2009 09:17:13 -0800
Re: Typical Cost difference between IPC-6012 Class 2 and Class 3 boards
John Foster
Thu, 5 Feb 2009 09:04:00 -0800
New Sender John Goulet
Re: ICOM 5000 ROSE Tester Contact Information
John Goulet
Sun, 15 Feb 2009 05:12:15 +0000
Re: Looking for test fixture quick release snap-in hold-down clamp
John Goulet
Sun, 8 Feb 2009 04:21:17 +0000
Re: No Clean that can be removed?
John Goulet
Mon, 2 Feb 2009 01:14:13 +0000
Re: Part solderability
John Goulet
Sun, 15 Feb 2009 04:38:12 +0000
Re: UMICORE PASTE
John Goulet
Mon, 2 Feb 2009 01:40:39 +0000
Re: Workmanship criteria for ipass connector
John Goulet
Sun, 15 Feb 2009 04:12:37 +0000
New Sender John Parsons
Flex Carrier?
John Parsons
Wed, 25 Feb 2009 16:55:55 -0800
Re: Flex Carrier?
John Parsons
Thu, 26 Feb 2009 08:29:37 -0800
Re: Flex Carrier?
John Parsons
Thu, 26 Feb 2009 13:29:48 -0800
New Sender jonathan noquil
Re: Hello everybody
jonathan noquil
Fri, 13 Feb 2009 22:20:45 +0800
New Sender Joyce Koo
Re: Apex Expo
Joyce Koo
Tue, 3 Feb 2009 10:38:13 -0500
Re: Apex Expo
Joyce Koo
Wed, 4 Feb 2009 13:02:42 -0500
Re: APEX EXPO - more ideas on getting approval
Joyce Koo
Tue, 3 Feb 2009 10:36:30 -0500
Re: Coating material
Joyce Koo
Fri, 6 Feb 2009 09:27:47 -0500
Re: Coating material
Joyce Koo
Fri, 27 Feb 2009 12:53:58 -0500
Re: ENIS
Joyce Koo
Thu, 12 Feb 2009 10:36:30 -0500
Re: In Search of a Technical Reference
Joyce Koo
Fri, 6 Feb 2009 09:25:29 -0500
Re: lead adding
Joyce Koo
Mon, 9 Feb 2009 15:09:49 -0500
Re: lead adding
Joyce Koo
Mon, 9 Feb 2009 16:02:07 -0500
Re: Leadfree has gone too far.
Joyce Koo
Tue, 17 Feb 2009 13:35:03 -0500
Re: Moisture Content of PWB's for Assembly?
Joyce Koo
Mon, 9 Feb 2009 15:44:57 -0500
Re: Moisture Content of PWB's for Assembly?
Joyce Koo
Mon, 9 Feb 2009 16:06:39 -0500
Re: Part solderability
Joyce Koo
Sun, 8 Feb 2009 12:34:06 -0500
Re: Part solderability
Joyce Koo
Tue, 10 Feb 2009 16:54:02 -0500
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Joyce Koo
Fri, 27 Feb 2009 12:48:40 -0500
Re: RoHS list
Joyce Koo
Sun, 8 Feb 2009 22:30:06 -0500
Re: RoHS list
Joyce Koo
Sun, 8 Feb 2009 22:52:14 -0500
Fw: [TN] NTC anti-this-and-that programs
Joyce Koo
Sun, 15 Feb 2009 15:13:06 -0500
New Sender Juan T. Marugán
Cup terminals. Soldering requirements.
Juan T. Marugán
Mon, 16 Feb 2009 14:11:18 -0600
New Sender Kane, Amol (349)
Re: Moisture Content of PWB's for Assembly?
Kane, Amol (349)
Mon, 9 Feb 2009 14:00:17 -0500
New Sender Kane, Joseph E (US SSA)
Re: Part solderability
Kane, Joseph E (US SSA)
Tue, 10 Feb 2009 16:47:41 -0500
New Sender Karen Tellefsen
Re: Apex Expo
Karen Tellefsen
Mon, 2 Feb 2009 16:47:38 -0500
Re: Leadfree has gone too far.
Karen Tellefsen
Tue, 17 Feb 2009 10:36:56 -0500
Re: Questionnaire
Karen Tellefsen
Mon, 16 Feb 2009 08:48:59 -0500
Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Mon, 9 Feb 2009 09:04:12 -0500
Re: Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Mon, 9 Feb 2009 09:43:58 -0500
Re: Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Mon, 9 Feb 2009 12:51:05 -0500
Re: Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Mon, 9 Feb 2009 17:02:34 -0500
Recommendation for a rapid prototype PCB fabricator
Karen Tellefsen
Tue, 10 Feb 2009 08:45:49 -0500
New Sender Keith Calhoun
Re: Conformal Coating Inspection
Keith Calhoun
Fri, 20 Feb 2009 11:08:29 -0500
Re: Leadfree has gone too far.
keith Calhoun
Tue, 17 Feb 2009 10:21:51 -0500
Re: Staking Question/Help...
keith Calhoun
Wed, 11 Feb 2009 09:47:30 -0500
New Sender Kelly Morris
REACH legislation? How's it going?
Kelly Morris
Mon, 2 Feb 2009 15:10:52 -0600
New Sender Ken Bloomquist
Re: Conformal Coating Inspection
Ken Bloomquist
Fri, 20 Feb 2009 08:50:20 -0800
Re: IPC-CC-830
Ken Bloomquist
Fri, 13 Feb 2009 14:23:20 -0800
Re: microscopes
Ken Bloomquist
Fri, 13 Feb 2009 11:12:48 -0800
Re: microscopes
Ken Bloomquist
Fri, 13 Feb 2009 11:43:24 -0800
Re: NTC Look Out!
Ken Bloomquist
Mon, 9 Feb 2009 13:32:09 -0800
Re: Repair soldermask
Ken Bloomquist
Fri, 20 Feb 2009 07:11:13 -0800
Re: robotic dispensing
Ken Bloomquist
Mon, 9 Feb 2009 13:08:43 -0800
Re: Virus Hoax
Ken Bloomquist
Tue, 17 Feb 2009 14:49:45 -0800
Re: Weird one - bismuth in overmold
Ken Bloomquist
Fri, 27 Feb 2009 07:23:58 -0800
[NTC] Cool New Google Tool
Ken Bloomquist
Wed, 11 Feb 2009 12:39:39 -0800
Re: [NTC] Repair soldermask
Ken Bloomquist
Fri, 20 Feb 2009 07:57:15 -0800
New Sender Kevin Glidden
Re: Coating material
Kevin Glidden
Fri, 6 Feb 2009 09:01:26 -0500
Re: Coating material
Kevin Glidden
Fri, 6 Feb 2009 13:07:07 -0500
Re: ICOM 5000 ROSE Tester Contact Information
Kevin Glidden
Fri, 6 Feb 2009 09:53:33 -0500
Re: PCB'S minimum line width
Kevin Glidden
Tue, 17 Feb 2009 09:55:13 -0500
Re: Safety question
Kevin Glidden
Thu, 19 Feb 2009 10:55:20 -0500
Re: Staking Question/Help...
Kevin Glidden
Wed, 11 Feb 2009 09:55:32 -0500
Re: Staking Question/Help...
Kevin Glidden
Wed, 11 Feb 2009 09:59:00 -0500
Re: Staking Question/Help...
Kevin Glidden
Wed, 11 Feb 2009 13:59:53 -0500
Re: Technical Reference for oceanic shipping
Kevin Glidden
Tue, 10 Feb 2009 14:01:40 -0500
Re: Technical Reference for oceanic shipping
Kevin Glidden
Tue, 10 Feb 2009 14:14:22 -0500
New Sender Kim Sparrow
Re: IPC through-hole LEAD diameter to HOLE diameter
Kim Sparrow
Mon, 2 Feb 2009 01:22:09 -0600
New Sender Kim Sterling
APEX EXPO - more ideas on getting approval
Kim Sterling
Tue, 3 Feb 2009 09:01:46 -0600
New Sender Lee parker
Re: Apex Expo
Lee parker
Mon, 2 Feb 2009 16:52:13 -0500
New Sender Lee Whiteman
Re: Counterfeit components market data
Lee Whiteman
Mon, 9 Feb 2009 13:25:10 -0500
Re: Counterfeit components market data
Lee Whiteman
Mon, 9 Feb 2009 15:35:58 -0500
CRACKED ENIG PADS
Lee Whiteman
Wed, 11 Feb 2009 13:20:11 -0500
Re: CRACKED ENIG PADS
Lee Whiteman
Wed, 11 Feb 2009 14:41:46 -0500
Re: CRACKED ENIG PADS
Lee Whiteman
Wed, 11 Feb 2009 17:50:10 -0500
Re: Leadfree has gone too far.
Lee Whiteman
Tue, 17 Feb 2009 10:34:09 -0500
Re: microscopes
Lee Whiteman
Fri, 13 Feb 2009 13:52:26 -0500
Re: NTC - Weird one - bismuth in overmold
Lee Whiteman
Fri, 27 Feb 2009 12:38:21 -0500
Re: NTC Look Out!
Lee Whiteman
Mon, 9 Feb 2009 16:26:48 -0500
Re: Where's the JCAA-JG-PP page?
Lee Whiteman
Wed, 18 Feb 2009 08:26:59 -0500
Re: Where's the JCAA-JG-PP page?
Lee Whiteman
Wed, 18 Feb 2009 08:40:47 -0500
New Sender legg
Re: Maybe not counterfeit, but definitely weird!
legg
Thu, 5 Feb 2009 16:24:21 -0600
New Sender Leif Erik Laerum
Misprints
Leif Erik Laerum
Thu, 19 Feb 2009 08:00:07 -0600
Re: Ultrasonic cleaner for PCB
Leif Erik Laerum
Thu, 19 Feb 2009 07:55:32 -0600
New Sender Leigh-Ann Litavis
Re: Local Solder Dross Recovery & solder joint reliability
Leigh-Ann Litavis
Wed, 11 Feb 2009 18:33:18 +0000
New Sender Leland Woodall
Acceptability of Inverted Resistor Packs or Modules
Leland Woodall
Fri, 6 Feb 2009 10:25:44 -0500
Re: Hello everybody
Leland Woodall
Thu, 12 Feb 2009 09:14:56 -0500
New Sender Liu, Edwin
Hello everybody
Liu, Edwin
Thu, 12 Feb 2009 20:09:30 +0800
MSN
Liu, Edwin
Tue, 17 Feb 2009 16:37:25 +0800
Questionnaire
Liu, Edwin
Mon, 16 Feb 2009 11:54:12 +0800
Re: Questionnaire
Liu, Edwin
Tue, 17 Feb 2009 11:52:34 +0800
New Sender Louis Hart
dewetting
Louis Hart
Thu, 19 Feb 2009 11:23:21 -0500
Re: Vapor Phase Soldering
Louis Hart
Mon, 2 Feb 2009 09:20:16 -0500
New Sender Lum Wee Mei
Re: Conformal Coating Inspection
Lum Wee Mei
Sat, 28 Feb 2009 10:07:03 +0800
New Sender Matthias Mansfeld
Re: Jumper wire forming for fine pitch QFP?
Matthias Mansfeld
Mon, 2 Feb 2009 14:25:59 +0100
New Sender Michael Holz
2141A errata microstrip equation
Michael Holz
Tue, 17 Feb 2009 11:27:09 -0600
New Sender Michelle Michelotti
Last Chance to Register-IPC/JEDEC Lead Free Conference Preview - FREE Webinar
Michelle Michelotti
Wed, 4 Feb 2009 14:07:08 -0600
Make your hotel reservations now for the IPC/JEDEC Lead Free Conference-March 3-5, 2009
Michelle Michelotti
Mon, 2 Feb 2009 10:21:48 -0600
Register Today! Flex Conference April 21-23, 2009 Minneapolis, Minn.
Michelle Michelotti
Wed, 4 Feb 2009 11:43:01 -0600
New Sender Mike Fenner
Re: Apex Expo
Mike Fenner
Tue, 3 Feb 2009 13:36:30 -0000
Re: C4 attach to organic laminate material
Mike Fenner
Mon, 2 Feb 2009 14:11:57 -0000
Re: Conformal Coating Inspection
Mike Fenner
Fri, 20 Feb 2009 16:30:52 -0000
Re: dewetting
Mike Fenner
Fri, 20 Feb 2009 08:20:01 -0000
Re: Hot Slump
Mike Fenner
Fri, 20 Feb 2009 12:03:05 -0000
Re: In Search of a Technical Reference
Mike Fenner
Fri, 6 Feb 2009 12:04:50 -0000
Re: Jumper wire forming for fine pitch QFP?
Mike Fenner
Mon, 2 Feb 2009 15:53:37 -0000
Re: Lead Free solder compatibility
Mike Fenner
Tue, 17 Feb 2009 10:52:58 -0000
Re: NTC anti-this-and-that programs
Mike Fenner
Mon, 16 Feb 2009 10:58:48 -0000
Re: Part solderability
Mike Fenner
Mon, 9 Feb 2009 16:19:58 -0000
Re: RoHS list
Mike Fenner
Mon, 9 Feb 2009 11:45:03 -0000
New Sender Mike Sewell
Re: Coating material
Mike Sewell
Fri, 6 Feb 2009 08:40:42 -0600
Re: Jumper wire forming for fine pitch QFP?
Mike Sewell
Mon, 2 Feb 2009 08:12:55 -0600
Re: Technical Reference for oceanic shipping
Mike Sewell
Tue, 10 Feb 2009 11:16:18 -0600
New Sender Miller, Rodney
LPIM
Miller, Rodney
Mon, 9 Feb 2009 15:03:29 -0600
Re: LPIM
Miller, Rodney
Tue, 10 Feb 2009 10:52:49 -0600
FW: Maybe not counterfeit, but definitely weird!
Miller, Rodney
Thu, 5 Feb 2009 08:24:16 -0600
Re: Moisture Content of PWB's for Assembly?
Miller, Rodney
Mon, 9 Feb 2009 14:59:21 -0600
New Sender Nivens, Carl W (US SSA)
Re: NTC anti-this-and-that programs
Nivens, Carl W (US SSA)
Fri, 13 Feb 2009 17:20:25 -0500
New Sender Olav Folland
Re: NTC anti-this-and-that programs
Olav Folland
Fri, 13 Feb 2009 15:11:44 -0800
New Sender P. Langeveld
Re: Bridging on SMD Connector
P. Langeveld
Tue, 3 Feb 2009 11:35:18 +0100
Re: Part solderability
P. Langeveld
Sat, 7 Feb 2009 11:03:06 +0100
Re: Vapor Phase Soldering
P. Langeveld
Tue, 3 Feb 2009 11:07:42 +0100
New Sender Paul Edwards
Re: CRACKED ENIG PADS
Paul Edwards
Wed, 11 Feb 2009 12:04:43 -0800
Re: Part solderability
Paul Edwards
Mon, 9 Feb 2009 10:41:12 -0800
Re: Rolling MELFs
Paul Edwards
Fri, 27 Feb 2009 11:05:02 -0800
New Sender Paul Reid
Re: Apex Expo
Paul Reid
Tue, 3 Feb 2009 09:55:21 -0500
Re: Apex Expo
Paul Reid
Tue, 3 Feb 2009 10:33:17 -0500
Re: CRACKED ENIG PADS
Paul Reid
Thu, 12 Feb 2009 15:48:48 -0500
Re: CRACKED ENIG PADS
Paul Reid
Fri, 13 Feb 2009 11:36:22 -0500
Re: microscopes
Paul Reid
Fri, 13 Feb 2009 13:14:39 -0500
New Sender Pete Houwen
Re: Questionnaire
Pete Houwen
Tue, 17 Feb 2009 13:35:41 -0600
Re: RoHS list
Pete Houwen
Mon, 9 Feb 2009 08:21:50 -0600
Re: Safety question
Pete Houwen
Thu, 19 Feb 2009 08:04:25 -0600
Re: [NTC] Cool New Google Tool
Pete Houwen
Wed, 18 Feb 2009 08:59:54 -0600
New Sender Phil Nutting
Conformal coating or encapsulating
Phil Nutting
Thu, 26 Feb 2009 11:53:04 -0500
Re: Conformal coating or encapsulating
Phil Nutting
Thu, 26 Feb 2009 13:02:19 -0500
Re: Leadfree has gone too far.
Phil Nutting
Tue, 17 Feb 2009 10:16:07 -0500
Re: NTC - Weird one - bismuth in overmold
Phil Nutting
Fri, 27 Feb 2009 14:33:19 -0500
Re: NTC anti-this-and-that programs
Phil Nutting
Fri, 13 Feb 2009 16:12:21 -0500
Re: Virus Hoax
Phil Nutting
Tue, 17 Feb 2009 17:18:16 -0500
New Sender Randall L Bock
Re: Earl Moon
Randall L Bock
Wed, 4 Feb 2009 08:00:47 -0500
Re: Earl Moon
Randall L Bock
Wed, 4 Feb 2009 12:43:13 -0500
Re: Safety question
Randall L Bock
Thu, 19 Feb 2009 07:35:11 -0500
New Sender Randy Morrison
Re: Bridging on SMD Connector
Randy Morrison
Mon, 2 Feb 2009 14:37:30 -0800
New Sender Ray Kong
Ultrasonic cleaner for PCB
Ray Kong
Wed, 18 Feb 2009 15:19:06 -0800
New Sender Richard Kraszewski
Re: Copper Mirror Test
Richard Kraszewski
Fri, 13 Feb 2009 09:19:23 -0600
Re: Hot Slump
Richard Kraszewski
Thu, 19 Feb 2009 15:02:10 -0600
ICOM 5000 ROSE Tester Contact Information
Richard Kraszewski
Fri, 6 Feb 2009 08:33:32 -0600
Re: IPC-CC-830
Richard Kraszewski
Fri, 13 Feb 2009 16:32:03 -0600
Local Solder Dross Recovery & solder joint reliability
Richard Kraszewski
Wed, 11 Feb 2009 12:27:20 -0600
New Sender Robert Kondner
Re: microscopes
Robert Kondner
Fri, 13 Feb 2009 13:57:49 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Fri, 13 Feb 2009 14:32:00 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Fri, 13 Feb 2009 18:58:49 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Sat, 14 Feb 2009 17:45:03 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Sun, 15 Feb 2009 13:56:49 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Sun, 15 Feb 2009 14:18:29 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Mon, 16 Feb 2009 00:12:39 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Mon, 16 Feb 2009 19:36:55 -0500
Re: NTC anti-this-and-that programs
Robert Kondner
Tue, 17 Feb 2009 10:58:55 -0500
Re: Questionnaire
Robert Kondner
Mon, 16 Feb 2009 11:06:38 -0500
Re: Questionnaire
Robert Kondner
Mon, 16 Feb 2009 13:43:18 -0500
Re: robotic dispensing
Robert Kondner
Mon, 9 Feb 2009 16:44:46 -0500
Virus Hoax
Robert Kondner
Tue, 17 Feb 2009 15:49:00 -0500
New Sender Roberts, Jon
Re: Conformal Coating Inspection
Roberts, Jon
Mon, 23 Feb 2009 14:18:58 -0600
New Sender ROGER STOOPS
Re: NTC anti-this-and-that programs
ROGER STOOPS
Mon, 16 Feb 2009 10:25:12 -0800
Re: Typical Cost difference between IPC-6012 Class 2 and Class 3 boards
ROGER STOOPS
Thu, 5 Feb 2009 16:46:40 -0800
New Sender Rudolph yu
Workmanship criteria for ipass connector
Rudolph yu
Wed, 11 Feb 2009 07:22:51 +0000
New Sender Scott Rougeux
Re: Wire Bonding Dummy Parts
Scott Rougeux
Thu, 26 Feb 2009 09:21:06 -0600
New Sender Scott Westheimer
Re: Fab house audit guideline/template
Scott Westheimer
Fri, 27 Feb 2009 11:27:24 -0500
New Sender Simonik, Dave R. (David)
Re: Earl Moon
Simonik, Dave R. (David)
Wed, 4 Feb 2009 08:17:30 -0500
New Sender Stadem, Richard D.
Re: Apex Expo
Stadem, Richard D.
Mon, 2 Feb 2009 15:27:33 -0600
Re: Apex Expo
Stadem, Richard D.
Tue, 3 Feb 2009 08:58:25 -0600
Re: Apex Expo
Stadem, Richard D.
Tue, 3 Feb 2009 09:37:03 -0600
Re: Apex Expo
Stadem, Richard D.
Tue, 3 Feb 2009 11:01:19 -0600
Re: BGA testing sockets
Stadem, Richard D.
Thu, 19 Feb 2009 15:20:49 -0600
Re: BGA testing sockets
Stadem, Richard D.
Mon, 23 Feb 2009 07:41:19 -0600
Re: Conformal Coating Inspection
Stadem, Richard D.
Mon, 23 Feb 2009 11:19:22 -0600
Re: Conformal Coating Inspection
Stadem, Richard D.
Mon, 23 Feb 2009 14:23:23 -0600
Re: Conformal coating or encapsulating
Stadem, Richard D.
Thu, 26 Feb 2009 11:05:39 -0600
Re: CRACKED ENIG PADS
Stadem, Richard D.
Wed, 11 Feb 2009 15:31:01 -0600
EMF shielding of MRAM devices
Stadem, Richard D.
Tue, 3 Feb 2009 10:29:08 -0600
Re: Hello everybody
Stadem, Richard D.
Thu, 12 Feb 2009 08:33:32 -0600
Re: Hot Slump
Stadem, Richard D.
Thu, 19 Feb 2009 15:16:06 -0600
Re: lead adding
Stadem, Richard D.
Tue, 10 Feb 2009 05:16:37 -0600
Leadfree has gone too far.
Stadem, Richard D.
Tue, 17 Feb 2009 08:10:10 -0600
Re: Leadfree has gone too far.
Stadem, Richard D.
Tue, 17 Feb 2009 09:29:01 -0600
Re: Looking for test fixture quick release snap-in hold-down clamp
Stadem, Richard D.
Thu, 5 Feb 2009 10:07:55 -0600
Re: Looking for test fixture quick release snap-in hold-down clamp
Stadem, Richard D.
Thu, 5 Feb 2009 10:28:34 -0600
Re: microscopes
Stadem, Richard D.
Fri, 13 Feb 2009 13:30:18 -0600
Re: NTC - Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 11:12:58 -0600
Re: NTC - Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 11:42:59 -0600
Re: NTC - Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 12:16:03 -0600
Re: NTC - Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 14:06:20 -0600
Re: NTC Look Out!
Stadem, Richard D.
Mon, 9 Feb 2009 15:28:09 -0600
Re: Recommendation for a rapid prototype PCB fabricator
Stadem, Richard D.
Mon, 9 Feb 2009 12:21:56 -0600
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Stadem, Richard D.
Fri, 27 Feb 2009 11:11:56 -0600
Re: RoHS list
Stadem, Richard D.
Mon, 9 Feb 2009 09:40:14 -0600
Re: Safety question
Stadem, Richard D.
Thu, 19 Feb 2009 06:31:16 -0600
Re: Storage of Iag PWAs
Stadem, Richard D.
Tue, 3 Feb 2009 13:28:27 -0600
Re: Ultrasonic cleaner for PCB
Stadem, Richard D.
Thu, 19 Feb 2009 06:13:19 -0600
Re: Ultrasonic cleaner for PCB
Stadem, Richard D.
Thu, 19 Feb 2009 08:54:45 -0600
Re: Ultrasonic cleaner for PCB
Stadem, Richard D.
Thu, 19 Feb 2009 08:57:57 -0600
Re: Ultrasonic cleaner for PCB
Stadem, Richard D.
Mon, 23 Feb 2009 08:36:11 -0600
Re: Weird one - bismuth in overmold
Stadem, Richard D.
Fri, 27 Feb 2009 10:40:42 -0600
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Stadem, Richard D.
Mon, 16 Feb 2009 09:00:53 -0600
New Sender Steve Gregory
Re: CRACKED ENIG PADS
Steve Gregory
Wed, 11 Feb 2009 12:41:42 -0600
Re: CRACKED ENIG PADS
Steve Gregory
Wed, 11 Feb 2009 14:46:01 -0600
Re: Earl Moon
Steve Gregory
Wed, 4 Feb 2009 07:07:31 -0600
Re: Jumper wire forming for fine pitch QFP?
Steve Gregory
Mon, 2 Feb 2009 07:04:30 -0600
Re: Leadfree has gone too far.
Steve Gregory
Tue, 17 Feb 2009 08:45:09 -0600
Re: Looking for test fixture quick release snap-in hold-down clamp
Steve Gregory
Thu, 5 Feb 2009 10:08:36 -0600
Re: Maybe not counterfeit, but definitely weird!
Steve Gregory
Wed, 4 Feb 2009 15:56:53 -0600
NTC Look Out!
Steve Gregory
Mon, 9 Feb 2009 15:18:47 -0600
Re: Part solderability
Steve Gregory
Fri, 6 Feb 2009 08:16:53 -0600
Re: Questionnaire
Steve Gregory
Mon, 16 Feb 2009 10:33:46 -0600
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Steve Gregory
Fri, 27 Feb 2009 12:27:48 -0600
Re: Repair soldermask
Steve Gregory
Fri, 20 Feb 2009 08:44:26 -0600
Sequencer Tape Suppliers?
Steve Gregory
Fri, 6 Feb 2009 10:03:51 -0600
Re: Sequencer Tape Suppliers?
Steve Gregory
Fri, 6 Feb 2009 10:42:19 -0600
Staking Question/Help...
Steve Gregory
Wed, 11 Feb 2009 08:33:35 -0600
Re: Staking Question/Help...
Steve Gregory
Wed, 11 Feb 2009 12:52:43 -0600
New Sender Steve Kelly
Re: Bridging on SMD Connector
Steve Kelly
Mon, 2 Feb 2009 15:49:09 -0500
New Sender Steve Smith
Re: Questionnaire
Steve Smith
Mon, 16 Feb 2009 09:20:57 -0500
New Sender Steven Creswick
Re: Leadfree has gone too far.
Steven Creswick
Tue, 17 Feb 2009 10:49:49 -0500
Re: Maybe not counterfeit, but definitely weird!
Steven Creswick
Thu, 5 Feb 2009 06:53:43 -0500
Re: Maybe not counterfeit, but definitely weird!
Steven Creswick
Thu, 5 Feb 2009 16:09:18 -0500
Re: NTC anti-this-and-that programs
Steven Creswick
Sun, 15 Feb 2009 11:07:51 -0500
Re: robotic dispensing
Steven Creswick
Mon, 9 Feb 2009 16:18:20 -0500
Re: robotic dispensing
Steven Creswick
Mon, 9 Feb 2009 18:13:14 -0500
Re: Wire Bonding Dummy Parts
Steven Creswick
Fri, 27 Feb 2009 10:49:14 -0500
New Sender Stewart, Dougal
Re: 2-D Laser Etch Barcodes on PCBs
Stewart, Dougal
Thu, 12 Feb 2009 16:31:25 -0000
Re: Typical Cost difference between IPC-6012 Class 2 and Cla ss 3 boards
Stewart, Dougal
Thu, 5 Feb 2009 17:43:43 -0000
Re: [TC] [IPC-600-6012] Microvias
Stewart, Dougal
Mon, 23 Feb 2009 14:47:15 -0000
New Sender Sunny Liu
Re: CRACKED ENIG PADS
Sunny Liu
Wed, 11 Feb 2009 13:20:14 -0800
New Sender Tan Geok Ang
Recall: [TN] Safety question
Tan Geok Ang
Thu, 19 Feb 2009 18:15:58 +0800
Re: Safety question
Tan Geok Ang
Thu, 19 Feb 2009 18:15:22 +0800
New Sender Ted Tontis
Re: Bridging on SMD Connector
Ted Tontis
Mon, 2 Feb 2009 16:04:44 -0600
Re: Bridging on SMD Connector
Ted Tontis
Mon, 2 Feb 2009 17:08:00 -0600
Re: Bridging on SMD Connector
Ted Tontis
Tue, 3 Feb 2009 08:08:09 -0600
Coating material
Ted Tontis
Thu, 5 Feb 2009 08:20:29 -0600
Re: Coating material
Ted Tontis
Thu, 5 Feb 2009 15:56:58 -0600
Re: Coating material
Ted Tontis
Thu, 5 Feb 2009 17:13:59 -0600
Re: Coating material
Ted Tontis
Fri, 6 Feb 2009 08:26:17 -0600
Re: Coating material
Ted Tontis
Fri, 6 Feb 2009 08:41:50 -0600
Re: Coating material
Ted Tontis
Mon, 9 Feb 2009 09:04:57 -0600
Re: Coating material
Ted Tontis
Fri, 27 Feb 2009 10:59:12 -0600
Re: Coating material
Ted Tontis
Fri, 27 Feb 2009 11:59:14 -0600
Re: Leadfree has gone too far.
Ted Tontis
Tue, 17 Feb 2009 10:25:58 -0600
Re: NTC anti-this-and-that programs
Ted Tontis
Fri, 13 Feb 2009 13:23:02 -0600
Re: NTC anti-this-and-that programs
Ted Tontis
Fri, 13 Feb 2009 14:35:05 -0600
Re: NTC anti-this-and-that programs
Ted Tontis
Fri, 13 Feb 2009 15:20:16 -0600
Re: NTC anti-this-and-that programs
Ted Tontis
Fri, 13 Feb 2009 17:01:17 -0600
Re: NTC anti-this-and-that programs
Ted Tontis
Tue, 17 Feb 2009 09:33:05 -0600
Vapor degreaser help
Ted Tontis
Wed, 4 Feb 2009 12:02:19 -0600
New Sender Temkin, Gregg
Re: Staking Question/Help...
Temkin, Gregg
Wed, 11 Feb 2009 07:53:10 -0800
New Sender Thayer, Wayne
Re: CRACKED ENIG PADS
Thayer, Wayne
Wed, 11 Feb 2009 16:42:23 -0500
Re: CRACKED ENIG PADS
Thayer, Wayne
Wed, 11 Feb 2009 18:47:11 -0500
Re: Jumper wire forming for fine pitch QFP?
Thayer, Wayne
Mon, 2 Feb 2009 16:12:05 -0500
Maybe not counterfeit, but definitely weird!
Thayer, Wayne
Wed, 4 Feb 2009 14:41:44 -0500
Re: Maybe not counterfeit, but definitely weird!
Thayer, Wayne
Wed, 4 Feb 2009 18:10:10 -0500
Re: Maybe not counterfeit, but definitely weird!
Thayer, Wayne
Thu, 5 Feb 2009 14:10:34 -0500
Re: microscopes
Thayer, Wayne
Fri, 13 Feb 2009 13:17:19 -0500
Re: Part solderability
Thayer, Wayne
Fri, 6 Feb 2009 10:00:45 -0500
Re: Wire Bonding Dummy Parts
Thayer, Wayne
Thu, 26 Feb 2009 12:40:01 -0500
New Sender Tina Nerad
Component Assembly and Design Tool Technology Intechange workshops, March 2009, Santa Clara, California
Tina Nerad
Tue, 10 Feb 2009 08:55:58 -0600
IPC Component Assembly Workshop Series, March 9-11, 2009, Santa Clara, California
Tina Nerad
Wed, 4 Feb 2009 14:19:53 -0600
New Sender Tom Burek
Lead Free solder compatibility
Tom Burek
Mon, 16 Feb 2009 11:28:00 -0700
Re: Lead Free solder compatibility
Tom Burek
Mon, 16 Feb 2009 12:53:07 -0700
Re: Lead Free solder compatibility
Tom Burek
Mon, 16 Feb 2009 14:58:47 -0700
New Sender Upton, Shawn
Re: Leadfree has gone too far.
Upton, Shawn
Tue, 17 Feb 2009 09:59:19 -0500
Re: Leadfree has gone too far.
Upton, Shawn
Tue, 17 Feb 2009 10:06:14 -0500
Re: Leadfree has gone too far.
Upton, Shawn
Tue, 17 Feb 2009 13:23:43 -0500
New Sender Victor Hernandez
Re: CRACKED ENIG PADS
Victor Hernandez
Wed, 11 Feb 2009 13:23:14 -0600
Re: microscopes
Victor Hernandez
Fri, 13 Feb 2009 12:14:07 -0600
Re: microscopes
Victor Hernandez
Fri, 13 Feb 2009 13:34:27 -0600
Re: microscopes
Victor Hernandez
Fri, 13 Feb 2009 14:41:26 -0600
Re: NTC - Weird one - bismuth in overmold
Victor Hernandez
Fri, 27 Feb 2009 12:33:02 -0600
FW: [TN] CRACKED ENIG PADS
Victor Hernandez
Wed, 11 Feb 2009 14:55:21 -0600
New Sender Vladimir Igoshev
Re: CRACKED ENIG PADS
Vladimir Igoshev
Wed, 11 Feb 2009 19:41:24 +0000
Re: CRACKED ENIG PADS
Vladimir Igoshev
Wed, 11 Feb 2009 20:40:39 +0000
Re: CRACKED ENIG PADS
Vladimir Igoshev
Wed, 11 Feb 2009 21:04:53 +0000
Re: CRACKED ENIG PADS
Vladimir Igoshev
Wed, 11 Feb 2009 16:59:17 -0500
Re: lead adding
Vladimir Igoshev
Mon, 9 Feb 2009 18:52:23 -0500
Re: lead adding
Vladimir Igoshev
Mon, 9 Feb 2009 20:00:51 -0500
Re: Part solderability
Vladimir Igoshev
Sun, 8 Feb 2009 13:55:01 -0500
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Vladimir Igoshev
Fri, 27 Feb 2009 11:07:20 -0500
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Vladimir Igoshev
Fri, 27 Feb 2009 11:33:30 -0500
Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste
Vladimir Igoshev
Fri, 27 Feb 2009 18:13:20 +0000
Re: Weird one - bismuth in overmold
Vladimir Igoshev
Thu, 26 Feb 2009 16:05:21 +0000
Re: Weird one - bismuth in overmold
Vladimir Igoshev
Thu, 26 Feb 2009 17:20:10 +0000
Re: Weird one - bismuth in overmold
Vladimir Igoshev
Thu, 26 Feb 2009 17:37:01 +0000
Re: Weird one - bismuth in overmold
Vladimir Igoshev
Thu, 26 Feb 2009 17:55:34 +0000
New Sender Wenger, George M.
Re: CRACKED ENIG PADS
Wenger, George M.
Wed, 11 Feb 2009 13:51:09 -0500
Re: Part solderability
Wenger, George M.
Mon, 9 Feb 2009 09:15:02 -0500
New Sender Werner engelmaier
Re: Apex Expo
Werner engelmaier
Mon, 2 Feb 2009 16:34:35 -0500
Re: Apex Expo
Werner engelmaier
Tue, 3 Feb 2009 11:54:58 -0500
Ceramic Core PCBs
Werner engelmaier
Mon, 23 Feb 2009 14:21:48 -0500
Re: Ceramic Core PCBs
Werner engelmaier
Tue, 24 Feb 2009 08:20:22 -0500
Re: CRACKED ENIG PADS
Werner engelmaier
Wed, 11 Feb 2009 15:27:41 -0500
Re: CRACKED ENIG PADS
Werner engelmaier
Wed, 11 Feb 2009 15:52:14 -0500
Re: CRACKED ENIG PADS
Werner engelmaier
Wed, 11 Feb 2009 17:11:33 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 15:48:46 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 17:04:42 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 17:06:07 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 18:45:56 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 19:35:05 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 19:44:16 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 20:09:34 -0500
Re: lead adding
Werner engelmaier
Mon, 9 Feb 2009 20:23:15 -0500
Re: Lead Free solder compatibility
Werner engelmaier
Mon, 16 Feb 2009 14:34:43 -0500
Re: Lead Free solder compatibility
Werner engelmaier
Mon, 16 Feb 2009 15:54:28 -0500
Re: Leadfree has gone too far.
Werner engelmaier
Tue, 17 Feb 2009 14:11:08 -0500
Re: NTC anti-this-and-that programs
Werner engelmaier
Fri, 13 Feb 2009 16:20:36 -0500
Re: NTC anti-this-and-that programs
Werner engelmaier
Sat, 14 Feb 2009 14:04:50 -0500
Re: NTC RE: [TN] Hello everybody
Werner engelmaier
Fri, 13 Feb 2009 08:50:36 -0500
Re: [tinwhiskers] - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 11:52:47 -0500
Re: [tinwhiskers] - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 13:26:36 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 12:56:43 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 13:24:17 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 15:19:19 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 15:39:20 -0500
Re: [tinwhiskers] Re: - RoHS & BGAs!!!
Werner engelmaier
Fri, 13 Feb 2009 16:14:36 -0500
New Sender Whittaker, Dewey (EHCOE)
Re: Apex Expo
Whittaker, Dewey (EHCOE)
Mon, 2 Feb 2009 14:26:09 -0700
Re: Apex Expo
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 08:14:03 -0700
Re: Apex Expo
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 08:43:21 -0700
Re: Apex Expo
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 08:44:57 -0700
Re: Coating material
Whittaker, Dewey (EHCOE)
Fri, 6 Feb 2009 06:38:08 -0700
Re: Coating material
Whittaker, Dewey (EHCOE)
Fri, 6 Feb 2009 07:12:04 -0700
Re: Conformal Coating Inspection
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 09:15:25 -0700
Re: Conformal Coating Inspection
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 10:33:09 -0700
Re: Conformal Coating Inspection
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 11:51:36 -0700
Re: CRACKED ENIG PADS
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 06:50:10 -0700
Re: Hello everybody
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 06:31:48 -0700
Re: Hot Slump
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 09:06:50 -0700
Re: In Search of a Technical Reference
Whittaker, Dewey (EHCOE)
Fri, 6 Feb 2009 07:10:11 -0700
Re: IPC-CC-830
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 14:47:15 -0700
Re: Leadfree has gone too far.
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 07:47:32 -0700
Re: microscopes
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 11:56:02 -0700
Re: NTC RE: [TN] Hello everybody
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 06:35:51 -0700
Re: NTC RE: [TN] Hello everybody
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 07:09:43 -0700
Re: Storage of Iag PWAs
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 07:14:58 -0700
Re: Vapor Phase Soldering
Whittaker, Dewey (EHCOE)
Tue, 3 Feb 2009 07:10:03 -0700
Re: [TC] [IPC-600-6012] Microvias
Whittaker, Dewey (EHCOE)
Mon, 23 Feb 2009 07:39:03 -0700
Re: [tinwhiskers] Re: Bourns announces hot dipping of tin - comments?
Whittaker, Dewey (EHCOE)
Fri, 13 Feb 2009 11:00:03 -0700
New Sender Wilson, Bob
Re: Apex Expo
Wilson, Bob
Mon, 2 Feb 2009 13:18:24 -0800
lead adding
Wilson, Bob
Mon, 9 Feb 2009 12:01:17 -0800
New Sender Wolfgang Erat
Re: 2-D Laser Etch Barcodes on PCBs
Wolfgang Erat
Fri, 13 Feb 2009 09:34:36 -0500
New Sender Woolley, Mark D. (Mark)
Re: CRACKED ENIG PADS
Woolley, Mark D. (Mark)
Wed, 11 Feb 2009 13:56:19 -0700

ATOM RSS1 RSS2