LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Joyce Koo

Wed, 4 Feb 2009 13:02:42 -0500

Douglas Pauls

Wed, 4 Feb 2009 11:54:19 -0600

Ian Hanna

Wed, 4 Feb 2009 12:35:30 -0500

Douglas Pauls

Wed, 4 Feb 2009 11:29:48 -0600

Ahne Oosterhof

Tue, 3 Feb 2009 16:57:41 -0800

Stadem, Richard D.

Tue, 3 Feb 2009 11:01:19 -0600

Werner engelmaier

Tue, 3 Feb 2009 11:54:58 -0500

Whittaker, Dewey (EHCOE)

Tue, 3 Feb 2009 08:44:57 -0700

Whittaker, Dewey (EHCOE)

Tue, 3 Feb 2009 08:43:21 -0700

Graham Naisbitt

Tue, 3 Feb 2009 15:39:53 +0000

Joyce Koo

Tue, 3 Feb 2009 10:38:13 -0500

Stadem, Richard D.

Tue, 3 Feb 2009 09:37:03 -0600

Paul Reid

Tue, 3 Feb 2009 10:33:17 -0500

Whittaker, Dewey (EHCOE)

Tue, 3 Feb 2009 08:14:03 -0700

Stadem, Richard D.

Tue, 3 Feb 2009 08:58:25 -0600

Paul Reid

Tue, 3 Feb 2009 09:55:21 -0500

Mike Fenner

Tue, 3 Feb 2009 13:36:30 -0000

Graham Naisbitt

Tue, 3 Feb 2009 12:23:02 +0000

Lee parker

Mon, 2 Feb 2009 16:52:13 -0500

Joe Fjelstad

Mon, 2 Feb 2009 16:46:40 -0500

Karen Tellefsen

Mon, 2 Feb 2009 16:47:38 -0500

Joe Fjelstad

Mon, 2 Feb 2009 16:36:45 -0500

Werner engelmaier

Mon, 2 Feb 2009 16:34:35 -0500

Stadem, Richard D.

Mon, 2 Feb 2009 15:27:33 -0600

Whittaker, Dewey (EHCOE)

Mon, 2 Feb 2009 14:26:09 -0700

Bev Christian

Mon, 2 Feb 2009 16:24:46 -0500

Wilson, Bob

Mon, 2 Feb 2009 13:18:24 -0800

APEX EXPO - more ideas on getting approval

Ioan Tempea

Mon, 2 Feb 2009 16:00:47 -0500

Apex Expo

Gen Gibbard

Mon, 2 Feb 2009 12:38:10 -0800

Re: APEX EXPO - more ideas on getting approval

Joyce Koo

Tue, 3 Feb 2009 10:36:30 -0500

APEX EXPO - more ideas on getting approval

Kim Sterling

Tue, 3 Feb 2009 09:01:46 -0600

BGA stencil aperture design guidelines

Re: BGA stencil aperture design guidelines

Bill Kunkle

Thu, 12 Feb 2009 13:37:52 -0500

BGA stencil aperture design guidelines

Gervascio, Thomas L

Wed, 11 Feb 2009 15:20:36 -0500

BGA testing sockets

Re: BGA testing sockets

Stadem, Richard D.

Mon, 23 Feb 2009 07:41:19 -0600

Re: BGA testing sockets

Stadem, Richard D.

Thu, 19 Feb 2009 15:20:49 -0600

BGA testing sockets

David Tremmel

Thu, 19 Feb 2009 21:08:06 +0000

Bridging on SMD Connector

Ted Tontis

Tue, 3 Feb 2009 08:08:09 -0600

Guy Ramsey

Tue, 3 Feb 2009 07:29:22 -0500

P. Langeveld

Tue, 3 Feb 2009 11:35:18 +0100

John Anselmo

Mon, 2 Feb 2009 17:24:28 -0700

Ted Tontis

Mon, 2 Feb 2009 17:08:00 -0600

Randy Morrison

Mon, 2 Feb 2009 14:37:30 -0800

John Anselmo

Mon, 2 Feb 2009 15:29:32 -0700

John Anselmo

Mon, 2 Feb 2009 15:24:45 -0700

Ted Tontis

Mon, 2 Feb 2009 16:04:44 -0600

Ioan Tempea

Mon, 2 Feb 2009 16:08:31 -0500

Guy Ramsey

Mon, 2 Feb 2009 15:56:23 -0500

Bridging on SMD Connector

Steve Kelly

Mon, 2 Feb 2009 15:49:09 -0500

John Anselmo

Mon, 2 Feb 2009 12:49:33 -0700

C4 attach to organic laminate material

Re: C4 attach to organic laminate material

Mike Fenner

Mon, 2 Feb 2009 14:11:57 -0000

Capacitor construction - foil alloy question

Re: Capacitor construction - foil alloy question

Hernefjord Ingemar

Tue, 17 Feb 2009 13:50:58 +0100

Re: Capacitor construction - foil alloy question

Carl VanWormer

Mon, 16 Feb 2009 16:24:13 -0800

Re: Capacitor construction - foil alloy question

Dennis Fritz

Mon, 16 Feb 2009 19:00:54 -0500

Capacitor construction - foil alloy question

Carl VanWormer

Mon, 16 Feb 2009 06:46:44 -0800

Ceramic Core PCBs

Re: Ceramic Core PCBs

Werner engelmaier

Tue, 24 Feb 2009 08:20:22 -0500

Re: Ceramic Core PCBs

Hernefjord Ingemar

Tue, 24 Feb 2009 08:35:05 +0100

Ceramic Core PCBs

Werner engelmaier

Mon, 23 Feb 2009 14:21:48 -0500

Coating material

Ted Tontis

Fri, 27 Feb 2009 11:59:14 -0600

Joyce Koo

Fri, 27 Feb 2009 12:53:58 -0500

Ted Tontis

Fri, 27 Feb 2009 10:59:12 -0600

Grunde Gjertsen

Tue, 10 Feb 2009 14:14:46 +0100

Ted Tontis

Mon, 9 Feb 2009 09:04:57 -0600

Inge

Sat, 7 Feb 2009 23:59:38 +0100

Kevin Glidden

Fri, 6 Feb 2009 13:07:07 -0500

Douglas Pauls

Fri, 6 Feb 2009 10:28:38 -0600

Ted Tontis

Fri, 6 Feb 2009 08:41:50 -0600

Mike Sewell

Fri, 6 Feb 2009 08:40:42 -0600

Joyce Koo

Fri, 6 Feb 2009 09:27:47 -0500

Ted Tontis

Fri, 6 Feb 2009 08:26:17 -0600

Whittaker, Dewey (EHCOE)

Fri, 6 Feb 2009 07:12:04 -0700

Kevin Glidden

Fri, 6 Feb 2009 09:01:26 -0500

Whittaker, Dewey (EHCOE)

Fri, 6 Feb 2009 06:38:08 -0700

Grunde Gjertsen

Fri, 6 Feb 2009 09:00:47 +0100

Ted Tontis

Thu, 5 Feb 2009 17:13:59 -0600

Douglas Pauls

Thu, 5 Feb 2009 16:32:41 -0600

Component Assembly and Design Tool Technology Intechange workshops, March 2009, Santa Clara, California

Ted Tontis

Thu, 5 Feb 2009 15:56:58 -0600

Coating material

Ted Tontis

Thu, 5 Feb 2009 08:20:29 -0600

Tina Nerad

Tue, 10 Feb 2009 08:55:58 -0600

CONFLICT: IPC-2223B and IPC-6013A

Re: CONFLICT: IPC-2223B and IPC-6013A

Anslow, Phillip (UK)

Fri, 6 Feb 2009 11:30:57 -0000

Conformal Coating Inspection

Lum Wee Mei

Sat, 28 Feb 2009 10:07:03 +0800

Stadem, Richard D.

Mon, 23 Feb 2009 14:23:23 -0600

Roberts, Jon

Mon, 23 Feb 2009 14:18:58 -0600

John Burke

Mon, 23 Feb 2009 11:38:23 -0800

Whittaker, Dewey (EHCOE)

Mon, 23 Feb 2009 11:51:36 -0700

Bob Willis

Mon, 23 Feb 2009 18:26:35 -0000

Whittaker, Dewey (EHCOE)

Mon, 23 Feb 2009 10:33:09 -0700

Stadem, Richard D.

Mon, 23 Feb 2009 11:19:22 -0600

Bob Willis

Mon, 23 Feb 2009 16:50:03 -0000

Whittaker, Dewey (EHCOE)

Mon, 23 Feb 2009 09:15:25 -0700

Bob Willis

Fri, 20 Feb 2009 18:44:41 -0000

Ken Bloomquist

Fri, 20 Feb 2009 08:50:20 -0800

Mike Fenner

Fri, 20 Feb 2009 16:30:52 -0000

Keith Calhoun

Fri, 20 Feb 2009 11:08:29 -0500

Conformal Coating Inspection

Brian Ellis

Fri, 20 Feb 2009 18:00:20 +0200

Bob Willis

Fri, 20 Feb 2009 15:52:19 -0000

Conformal coating or encapsulating

Re: Conformal coating or encapsulating

Phil Nutting

Thu, 26 Feb 2009 13:02:19 -0500

Re: Conformal coating or encapsulating

Graham Collins

Thu, 26 Feb 2009 13:05:51 -0400

Re: Conformal coating or encapsulating

Stadem, Richard D.

Thu, 26 Feb 2009 11:05:39 -0600

Conformal coating or encapsulating

Phil Nutting

Thu, 26 Feb 2009 11:53:04 -0500

Copper Mirror Test

Re: Copper Mirror Test

Bev Christian

Fri, 13 Feb 2009 11:35:34 -0500

Re: Copper Mirror Test

Richard Kraszewski

Fri, 13 Feb 2009 09:19:23 -0600

Copper Mirror Test

Bev Christian

Wed, 11 Feb 2009 15:56:48 -0500

Counterfeit components market data

Lee Whiteman

Mon, 9 Feb 2009 15:35:58 -0500

Inge

Mon, 9 Feb 2009 21:34:57 +0100

Bev Christian

Mon, 9 Feb 2009 13:51:58 -0500

Jerry Dengler

Mon, 9 Feb 2009 13:29:35 -0500

Bev Christian

Mon, 9 Feb 2009 13:28:55 -0500

Counterfeit components market data

Lee Whiteman

Mon, 9 Feb 2009 13:25:10 -0500

John Burke

Mon, 9 Feb 2009 10:22:17 -0800

CRACKED ENIG PADS

Paul Reid

Fri, 13 Feb 2009 11:36:22 -0500

Dwight Mattix

Fri, 13 Feb 2009 07:23:21 -0800

Whittaker, Dewey (EHCOE)

Fri, 13 Feb 2009 06:50:10 -0700

Dwight Mattix

Thu, 12 Feb 2009 13:17:14 -0800

Paul Reid

Thu, 12 Feb 2009 15:48:48 -0500

Bob Willis

Thu, 12 Feb 2009 16:17:59 -0000

Thayer, Wayne

Wed, 11 Feb 2009 18:47:11 -0500

Lee Whiteman

Wed, 11 Feb 2009 17:50:10 -0500

David D. Hillman

Wed, 11 Feb 2009 16:33:00 -0600

Werner engelmaier

Wed, 11 Feb 2009 17:11:33 -0500

Vladimir Igoshev

Wed, 11 Feb 2009 16:59:17 -0500

Thayer, Wayne

Wed, 11 Feb 2009 16:42:23 -0500

Stadem, Richard D.

Wed, 11 Feb 2009 15:31:01 -0600

Sunny Liu

Wed, 11 Feb 2009 13:20:14 -0800

John Burke

Wed, 11 Feb 2009 13:15:04 -0800

Vladimir Igoshev

Wed, 11 Feb 2009 21:04:53 +0000

Bev Christian

Wed, 11 Feb 2009 16:01:40 -0500

Woolley, Mark D. (Mark)

Wed, 11 Feb 2009 13:56:19 -0700

Werner engelmaier

Wed, 11 Feb 2009 15:52:14 -0500

Inge

Wed, 11 Feb 2009 21:50:06 +0100

Steve Gregory

Wed, 11 Feb 2009 14:46:01 -0600

Vladimir Igoshev

Wed, 11 Feb 2009 20:40:39 +0000

Werner engelmaier

Wed, 11 Feb 2009 15:27:41 -0500

Paul Edwards

Wed, 11 Feb 2009 12:04:43 -0800

Inge

Wed, 11 Feb 2009 20:51:02 +0100

Lee Whiteman

Wed, 11 Feb 2009 14:41:46 -0500

Vladimir Igoshev

Wed, 11 Feb 2009 19:41:24 +0000

Victor Hernandez

Wed, 11 Feb 2009 13:23:14 -0600

Wenger, George M.

Wed, 11 Feb 2009 13:51:09 -0500

Cup terminals. Soldering requirements.

Steve Gregory

Wed, 11 Feb 2009 12:41:42 -0600

CRACKED ENIG PADS

Lee Whiteman

Wed, 11 Feb 2009 13:20:11 -0500

Juan T. Marugán

Mon, 16 Feb 2009 14:11:18 -0600

dewetting

Hernefjord Ingemar

Mon, 23 Feb 2009 10:19:11 +0100

Brian Ellis

Fri, 20 Feb 2009 11:08:21 +0200

Mike Fenner

Fri, 20 Feb 2009 08:20:01 -0000

David D. Hillman

Thu, 19 Feb 2009 11:28:42 -0600

Brian Ellis

Thu, 19 Feb 2009 19:02:29 +0200

dewetting

Louis Hart

Thu, 19 Feb 2009 11:23:21 -0500

Earl Moon

鸿金

Sat, 7 Feb 2009 17:10:09 +0800

Jack Olson

Thu, 5 Feb 2009 14:51:29 -0600

Ioan Tempea

Thu, 5 Feb 2009 15:44:42 -0500

EIMCNews

Thu, 5 Feb 2009 12:40:24 -0800

Earl Moon

Jack Olson

Thu, 5 Feb 2009 14:28:21 -0600

Randall L Bock

Wed, 4 Feb 2009 12:43:13 -0500

Joe Fjelstad

Wed, 4 Feb 2009 12:38:38 EST

Ioan Tempea

Wed, 4 Feb 2009 08:21:14 -0500

Simonik, Dave R. (David)

Wed, 4 Feb 2009 08:17:30 -0500

Steve Gregory

Wed, 4 Feb 2009 07:07:31 -0600

EMF shielding of MRAM devices

Randall L Bock

Wed, 4 Feb 2009 08:00:47 -0500

Earl Moon

Ioan Tempea

Wed, 4 Feb 2009 07:57:21 -0500

Stadem, Richard D.

Tue, 3 Feb 2009 10:29:08 -0600

ENIS

Re: ENIS

Joyce Koo

Thu, 12 Feb 2009 10:36:30 -0500

Re: ENIS

David D. Hillman

Thu, 12 Feb 2009 09:05:35 -0600

ENIS

Ioan Tempea

Thu, 12 Feb 2009 09:27:39 -0500

Fab house audit guideline/template

Re: Fab house audit guideline/template

Craig Sullivan

Fri, 27 Feb 2009 11:39:57 -0500

Re: Fab house audit guideline/template

Scott Westheimer

Fri, 27 Feb 2009 11:27:24 -0500

Fab house audit guideline/template

Craig Sullivan

Fri, 27 Feb 2009 09:55:46 -0600

Flex Carrier?

Bob Willis

Fri, 27 Feb 2009 08:12:24 -0000

John Parsons

Thu, 26 Feb 2009 13:29:48 -0800

John Parsons

Thu, 26 Feb 2009 08:29:37 -0800

Joe Fjelstad

Thu, 26 Feb 2009 11:13:16 EST

Bob Willis

Thu, 26 Feb 2009 08:03:04 -0000

Flex Carrier?

John Parsons

Wed, 25 Feb 2009 16:55:55 -0800

Hello everybody

jonathan noquil

Fri, 13 Feb 2009 22:20:45 +0800

Whittaker, Dewey (EHCOE)

Fri, 13 Feb 2009 06:31:48 -0700

Guy Ramsey

Thu, 12 Feb 2009 10:11:27 -0500

Barbara Burcham

Thu, 12 Feb 2009 08:45:30 -0600

Stadem, Richard D.

Thu, 12 Feb 2009 08:33:32 -0600

Leland Woodall

Thu, 12 Feb 2009 09:14:56 -0500

Hello everybody

Liu, Edwin

Thu, 12 Feb 2009 20:09:30 +0800

hi:

Re: hi:

Brian Ellis

Mon, 16 Feb 2009 09:54:25 +0200

hi:

Aquino Quek

Mon, 16 Feb 2009 05:25:20 +0800

Hot Slump

Whittaker, Dewey (EHCOE)

Mon, 23 Feb 2009 09:06:50 -0700

Graham Naisbitt

Fri, 20 Feb 2009 13:31:18 +0000

Bev Christian

Fri, 20 Feb 2009 08:04:16 -0500

Graham Naisbitt

Fri, 20 Feb 2009 12:41:16 +0000

Mike Fenner

Fri, 20 Feb 2009 12:03:05 -0000

Stadem, Richard D.

Thu, 19 Feb 2009 15:16:06 -0600

ICOM 5000 ROSE Tester Contact Information

Richard Kraszewski

Thu, 19 Feb 2009 15:02:10 -0600

Hot Slump

Bev Christian

Thu, 19 Feb 2009 15:41:00 -0500

Re: ICOM 5000 ROSE Tester Contact Information

John Goulet

Sun, 15 Feb 2009 05:12:15 +0000

Re: ICOM 5000 ROSE Tester Contact Information

Kevin Glidden

Fri, 6 Feb 2009 09:53:33 -0500

ICOM 5000 ROSE Tester Contact Information

Richard Kraszewski

Fri, 6 Feb 2009 08:33:32 -0600

In Search of a Technical Reference

Brian Ellis

Sun, 8 Feb 2009 11:09:30 +0200

Inge

Sun, 8 Feb 2009 00:50:34 +0100

Brian Ellis

Fri, 6 Feb 2009 16:29:07 +0200

Joyce Koo

Fri, 6 Feb 2009 09:25:29 -0500

Whittaker, Dewey (EHCOE)

Fri, 6 Feb 2009 07:10:11 -0700

David D. Hillman

Fri, 6 Feb 2009 07:38:31 -0600

Mike Fenner

Fri, 6 Feb 2009 12:04:50 -0000

Brian Ellis

Fri, 6 Feb 2009 09:29:33 +0200

In Search of a Technical Reference

Bev Christian

Thu, 5 Feb 2009 17:19:50 -0500

David D. Hillman

Thu, 5 Feb 2009 16:18:41 -0600

IPC Component Assembly Workshop Series, March 9-11, 2009, Santa Clara, California

Tina Nerad

Wed, 4 Feb 2009 14:19:53 -0600

IPC through-hole LEAD diameter to HOLE diameter

Re: IPC through-hole LEAD diameter to HOLE diameter

Kim Sparrow

Mon, 2 Feb 2009 01:22:09 -0600

IPC-CC-830

Douglas Pauls

Wed, 25 Feb 2009 13:13:03 -0600

Jean-François Bissonnette

Wed, 25 Feb 2009 11:51:58 -0500

Joe Macko

Tue, 17 Feb 2009 07:06:41 -0800

Douglas Pauls

Fri, 13 Feb 2009 17:02:06 -0600

Richard Kraszewski

Fri, 13 Feb 2009 16:32:03 -0600

Ken Bloomquist

Fri, 13 Feb 2009 14:23:20 -0800

JEDEC STD 22-A113 question

Whittaker, Dewey (EHCOE)

Fri, 13 Feb 2009 14:47:15 -0700

IPC-CC-830

Jean-François Bissonnette

Fri, 13 Feb 2009 16:38:30 -0500

Joe Macko

Mon, 9 Feb 2009 08:49:23 -0800

Jumper wire forming for fine pitch QFP?

Thayer, Wayne

Mon, 2 Feb 2009 16:12:05 -0500

Mike Fenner

Mon, 2 Feb 2009 15:53:37 -0000

Barbara Burcham

Mon, 2 Feb 2009 08:56:15 -0600

Graham Collins

Mon, 2 Feb 2009 10:02:52 -0400

Mike Sewell

Mon, 2 Feb 2009 08:12:55 -0600

Matthias Mansfeld

Mon, 2 Feb 2009 14:25:59 +0100

Jumper wire forming for fine pitch QFP?

Steve Gregory

Mon, 2 Feb 2009 07:04:30 -0600

Graham Collins

Mon, 2 Feb 2009 08:59:05 -0400

Last call for Lead-Free Conference Mar 3-5

Anne Marie Mulvihill

Tue, 24 Feb 2009 11:23:17 -0600

Last Chance to Register-IPC/JEDEC Lead Free Conference Preview - FREE Webinar

Michelle Michelotti

Wed, 4 Feb 2009 14:07:08 -0600

lead adding

Stadem, Richard D.

Tue, 10 Feb 2009 05:16:37 -0600

Werner engelmaier

Mon, 9 Feb 2009 20:23:15 -0500

Joe Fjelstad

Mon, 9 Feb 2009 20:13:52 EST

Werner engelmaier

Mon, 9 Feb 2009 20:09:34 -0500

Vladimir Igoshev

Mon, 9 Feb 2009 20:00:51 -0500

Werner engelmaier

Mon, 9 Feb 2009 19:44:16 -0500

Werner engelmaier

Mon, 9 Feb 2009 19:35:05 -0500

Joe Fjelstad

Mon, 9 Feb 2009 19:26:09 EST

Vladimir Igoshev

Mon, 9 Feb 2009 18:52:23 -0500

Werner engelmaier

Mon, 9 Feb 2009 18:45:56 -0500

Joe Fjelstad

Mon, 9 Feb 2009 17:45:46 EST

Werner engelmaier

Mon, 9 Feb 2009 17:06:07 -0500

Werner engelmaier

Mon, 9 Feb 2009 17:04:42 -0500

Joyce Koo

Mon, 9 Feb 2009 16:02:07 -0500

Inge

Mon, 9 Feb 2009 22:01:40 +0100

Werner engelmaier

Mon, 9 Feb 2009 15:48:46 -0500

Lead Free solder compatibility

Joyce Koo

Mon, 9 Feb 2009 15:09:49 -0500

lead adding

Wilson, Bob

Mon, 9 Feb 2009 12:01:17 -0800

Mike Fenner

Tue, 17 Feb 2009 10:52:58 -0000

Tom Burek

Mon, 16 Feb 2009 14:58:47 -0700

Werner engelmaier

Mon, 16 Feb 2009 15:54:28 -0500

Tom Burek

Mon, 16 Feb 2009 12:53:07 -0700

David D. Hillman

Mon, 16 Feb 2009 13:44:18 -0600

Lead Free solder compatibility

Werner engelmaier

Mon, 16 Feb 2009 14:34:43 -0500

Tom Burek

Mon, 16 Feb 2009 11:28:00 -0700

Leadfree has gone too far.

Whittaker, Dewey (EHCOE)

Mon, 23 Feb 2009 07:47:32 -0700

Charlie Pitarys

Wed, 18 Feb 2009 16:38:45 -0600

Bev Christian

Tue, 17 Feb 2009 14:27:47 -0500

Inge

Tue, 17 Feb 2009 20:15:43 +0100

Werner engelmaier

Tue, 17 Feb 2009 14:11:08 -0500

Dwight Mattix

Tue, 17 Feb 2009 11:04:45 -0800

Joyce Koo

Tue, 17 Feb 2009 13:35:03 -0500

Upton, Shawn

Tue, 17 Feb 2009 13:23:43 -0500

Dwight Mattix

Tue, 17 Feb 2009 10:09:01 -0800

Dwight Mattix

Tue, 17 Feb 2009 10:07:29 -0800

Dwight Mattix

Tue, 17 Feb 2009 10:06:33 -0800

Bev Christian

Tue, 17 Feb 2009 12:37:07 -0500

Joe Fjelstad

Tue, 17 Feb 2009 12:25:09 EST

Dennis Fritz

Tue, 17 Feb 2009 11:30:47 -0500

Ted Tontis

Tue, 17 Feb 2009 10:25:58 -0600

Brian Ellis

Tue, 17 Feb 2009 18:14:58 +0200

Steven Creswick

Tue, 17 Feb 2009 10:49:49 -0500

Joe Fjelstad

Tue, 17 Feb 2009 10:49:41 EST

Dave Dixon

Tue, 17 Feb 2009 09:47:39 -0600

Stadem, Richard D.

Tue, 17 Feb 2009 09:29:01 -0600

Graham Collins

Tue, 17 Feb 2009 11:36:41 -0400

Karen Tellefsen

Tue, 17 Feb 2009 10:36:56 -0500

Lee Whiteman

Tue, 17 Feb 2009 10:34:09 -0500

James Head

Tue, 17 Feb 2009 15:33:41 -0000

Graham Collins

Tue, 17 Feb 2009 11:29:59 -0400

David D. Hillman

Tue, 17 Feb 2009 09:26:45 -0600

Eric CHRISTISON

Tue, 17 Feb 2009 15:24:26 +0000

Deac Descoteaux

Tue, 17 Feb 2009 07:23:30 -0800

Graham Collins

Tue, 17 Feb 2009 11:22:39 -0400

keith Calhoun

Tue, 17 Feb 2009 10:21:51 -0500

Phil Nutting

Tue, 17 Feb 2009 10:16:07 -0500

Upton, Shawn

Tue, 17 Feb 2009 10:06:14 -0500

Upton, Shawn

Tue, 17 Feb 2009 09:59:19 -0500

David Baldwin

Tue, 17 Feb 2009 07:47:51 -0700

Leadfree has gone too far.

Steve Gregory

Tue, 17 Feb 2009 08:45:09 -0600

Stadem, Richard D.

Tue, 17 Feb 2009 08:10:10 -0600

Local Solder Dross Recovery & solder joint reliability

Re: Local Solder Dross Recovery & solder joint reliability

David D. Hillman

Wed, 11 Feb 2009 16:53:15 -0600

Re: Local Solder Dross Recovery & solder joint reliability

Leigh-Ann Litavis

Wed, 11 Feb 2009 18:33:18 +0000

Local Solder Dross Recovery & solder joint reliability

Richard Kraszewski

Wed, 11 Feb 2009 12:27:20 -0600

Looking for manufacturer of air bag deployment modules

Re: Looking for manufacturer of air bag deployment modules

Goulet mail

Thu, 5 Feb 2009 06:19:15 -0500

Looking for test fixture quick release snap-in hold-down clamp

Re: Looking for test fixture quick release snap-in hold-down clamp

John Goulet

Sun, 8 Feb 2009 04:21:17 +0000

Re: Looking for test fixture quick release snap-in hold-down clamp

Carl VanWormer

Thu, 5 Feb 2009 14:48:13 -0800

Re: Looking for test fixture quick release snap-in hold-down clamp

Stadem, Richard D.

Thu, 5 Feb 2009 10:28:34 -0600

Re: Looking for test fixture quick release snap-in hold-down clamp

Stadem, Richard D.

Thu, 5 Feb 2009 10:07:55 -0600

Re: Looking for test fixture quick release snap-in hold-down clamp

Steve Gregory

Thu, 5 Feb 2009 10:08:36 -0600

Looking for test fixture quick release snap-in hold-down clamp

Carl VanWormer

Thu, 5 Feb 2009 07:25:55 -0800

LPIM

Re: LPIM

Miller, Rodney

Tue, 10 Feb 2009 10:52:49 -0600

Re: LPIM

Croslin, Robert

Tue, 10 Feb 2009 11:46:23 -0500

LPIM

Miller, Rodney

Mon, 9 Feb 2009 15:03:29 -0600

Make your hotel reservations now for the IPC/JEDEC Lead Free Conference-March 3-5, 2009

Michelle Michelotti

Mon, 2 Feb 2009 10:21:48 -0600

Maybe not counterfeit, but definitely weird!

legg

Thu, 5 Feb 2009 16:24:21 -0600

Steven Creswick

Thu, 5 Feb 2009 16:09:18 -0500

FW: Maybe not counterfeit, but definitely weird!

Thayer, Wayne

Thu, 5 Feb 2009 14:10:34 -0500

Miller, Rodney

Thu, 5 Feb 2009 08:24:16 -0600

Steven Creswick

Thu, 5 Feb 2009 06:53:43 -0500

Inge

Thu, 5 Feb 2009 09:15:12 +0100

Bev Christian

Wed, 4 Feb 2009 18:40:00 -0500

Ahne Oosterhof

Wed, 4 Feb 2009 15:33:33 -0800

Thayer, Wayne

Wed, 4 Feb 2009 18:10:10 -0500

Dave Dixon

Wed, 4 Feb 2009 16:10:19 -0600

Bev Christian

Wed, 4 Feb 2009 17:00:24 -0500

Maybe not counterfeit, but definitely weird!

Steve Gregory

Wed, 4 Feb 2009 15:56:53 -0600

Thayer, Wayne

Wed, 4 Feb 2009 14:41:44 -0500

microscopes

Victor Hernandez

Fri, 13 Feb 2009 14:41:26 -0600

Ken Bloomquist

Fri, 13 Feb 2009 11:43:24 -0800

Victor Hernandez

Fri, 13 Feb 2009 13:34:27 -0600

Stadem, Richard D.

Fri, 13 Feb 2009 13:30:18 -0600

Ken Bloomquist

Fri, 13 Feb 2009 11:12:48 -0800

David D. Hillman

Fri, 13 Feb 2009 12:59:49 -0600

Robert Kondner

Fri, 13 Feb 2009 13:57:49 -0500

Whittaker, Dewey (EHCOE)

Fri, 13 Feb 2009 11:56:02 -0700

Lee Whiteman

Fri, 13 Feb 2009 13:52:26 -0500

Inge

Fri, 13 Feb 2009 19:30:01 +0100

Thayer, Wayne

Fri, 13 Feb 2009 13:17:19 -0500

Paul Reid

Fri, 13 Feb 2009 13:14:39 -0500

Moisture Content of PWB's for Assembly?

Victor Hernandez

Fri, 13 Feb 2009 12:14:07 -0600

microscopes

John Foster

Fri, 13 Feb 2009 10:01:34 -0800

Misprints

Re: Misprints

Jerry Dengler

Thu, 19 Feb 2009 09:35:37 -0500

Misprints

Leif Erik Laerum

Thu, 19 Feb 2009 08:00:07 -0600

Joyce Koo

Mon, 9 Feb 2009 16:06:39 -0500

Miller, Rodney

Mon, 9 Feb 2009 14:59:21 -0600

Joyce Koo

Mon, 9 Feb 2009 15:44:57 -0500

Inge

Mon, 9 Feb 2009 21:39:24 +0100

No Clean that can be removed?

Kane, Amol (349)

Mon, 9 Feb 2009 14:00:17 -0500

MSN

Liu, Edwin

Tue, 17 Feb 2009 16:37:25 +0800

Re: No Clean that can be removed?

Brian Ellis

Mon, 2 Feb 2009 10:17:36 +0200

Re: No Clean that can be removed?

John Goulet

Mon, 2 Feb 2009 01:14:13 +0000

NTC - Weird one - bismuth in overmold

Stadem, Richard D.

Fri, 27 Feb 2009 14:06:20 -0600

ALLEN, LOA

Fri, 27 Feb 2009 11:43:49 -0800

Phil Nutting

Fri, 27 Feb 2009 14:33:19 -0500

Dennis Fritz

Fri, 27 Feb 2009 14:20:14 -0500

Victor Hernandez

Fri, 27 Feb 2009 12:33:02 -0600

Stadem, Richard D.

Fri, 27 Feb 2009 12:16:03 -0600

Douglas Pauls

Fri, 27 Feb 2009 11:53:42 -0600

Stadem, Richard D.

Fri, 27 Feb 2009 11:42:59 -0600

Lee Whiteman

Fri, 27 Feb 2009 12:38:21 -0500

Douglas Pauls

Fri, 27 Feb 2009 11:28:02 -0600

Stadem, Richard D.

Fri, 27 Feb 2009 11:12:58 -0600

Genny Gibbard

Fri, 27 Feb 2009 10:56:24 -0600

NTC anti-this-and-that programs

David D. Hillman

Fri, 27 Feb 2009 10:52:22 -0600

Inge

Tue, 17 Feb 2009 20:40:07 +0100

Inge

Tue, 17 Feb 2009 18:13:29 +0100

Robert Kondner

Tue, 17 Feb 2009 10:58:55 -0500

Ted Tontis

Tue, 17 Feb 2009 09:33:05 -0600

Robert Kondner

Mon, 16 Feb 2009 19:36:55 -0500

ROGER STOOPS

Mon, 16 Feb 2009 10:25:12 -0800

Graham Naisbitt

Mon, 16 Feb 2009 11:28:09 +0000

Mike Fenner

Mon, 16 Feb 2009 10:58:48 -0000

Robert Kondner

Mon, 16 Feb 2009 00:12:39 -0500

Inge

Sun, 15 Feb 2009 23:16:34 +0100

Robert Kondner

Sun, 15 Feb 2009 14:18:29 -0500

Robert Kondner

Sun, 15 Feb 2009 13:56:49 -0500

Steven Creswick

Sun, 15 Feb 2009 11:07:51 -0500

Inge

Sun, 15 Feb 2009 11:17:41 +0100

Robert Kondner

Sat, 14 Feb 2009 17:45:03 -0500

Inge

Sat, 14 Feb 2009 21:13:02 +0100

Werner engelmaier

Sat, 14 Feb 2009 14:04:50 -0500

Inge

Sat, 14 Feb 2009 18:09:12 +0100

Robert Kondner

Fri, 13 Feb 2009 18:58:49 -0500

Olav Folland

Fri, 13 Feb 2009 15:11:44 -0800

Ted Tontis

Fri, 13 Feb 2009 17:01:17 -0600

John Burke

Fri, 13 Feb 2009 14:43:36 -0800

Nivens, Carl W (US SSA)

Fri, 13 Feb 2009 17:20:25 -0500

Werner engelmaier

Fri, 13 Feb 2009 16:20:36 -0500

Ted Tontis

Fri, 13 Feb 2009 15:20:16 -0600

Phil Nutting

Fri, 13 Feb 2009 16:12:21 -0500

Inge

Fri, 13 Feb 2009 21:50:49 +0100

Ian Hanna

Fri, 13 Feb 2009 15:49:21 -0500

Ted Tontis

Fri, 13 Feb 2009 14:35:05 -0600

Robert Kondner

Fri, 13 Feb 2009 14:32:00 -0500

NTC anti-this-and-that programs

Ted Tontis

Fri, 13 Feb 2009 13:23:02 -0600

Inge

Fri, 13 Feb 2009 20:06:04 +0100

NTC Look Out!

Ken Bloomquist

Mon, 9 Feb 2009 13:32:09 -0800

Stadem, Richard D.

Mon, 9 Feb 2009 15:28:09 -0600

Lee Whiteman

Mon, 9 Feb 2009 16:26:48 -0500

NTC RE: [TN] Hello everybody

Inge

Mon, 9 Feb 2009 22:25:04 +0100

NTC Look Out!

Steve Gregory

Mon, 9 Feb 2009 15:18:47 -0600

Re: NTC RE: [TN] Hello everybody

Whittaker, Dewey (EHCOE)

Fri, 13 Feb 2009 07:09:43 -0700

Re: NTC RE: [TN] Hello everybody

Werner engelmaier

Fri, 13 Feb 2009 08:50:36 -0500

Re: NTC RE: [TN] Hello everybody

Whittaker, Dewey (EHCOE)

Fri, 13 Feb 2009 06:35:51 -0700

NTC RE: [TN] Hello everybody

Graham Collins

Thu, 12 Feb 2009 11:21:03 -0400

NTC [TN] In Search of a Technical Reference

Re: NTC [TN] In Search of a Technical Reference

Bev Christian

Sat, 7 Feb 2009 20:37:15 -0500

Part solderability

John Goulet

Sun, 15 Feb 2009 04:38:12 +0000

Joyce Koo

Tue, 10 Feb 2009 16:54:02 -0500

Kane, Joseph E (US SSA)

Tue, 10 Feb 2009 16:47:41 -0500

David D. Hillman

Tue, 10 Feb 2009 08:42:27 -0600

Graham Collins

Tue, 10 Feb 2009 10:23:09 -0400

Inge

Mon, 9 Feb 2009 21:30:33 +0100

Paul Edwards

Mon, 9 Feb 2009 10:41:12 -0800

Graham Collins

Mon, 9 Feb 2009 13:57:53 -0400

Mike Fenner

Mon, 9 Feb 2009 16:19:58 -0000

David D. Hillman

Mon, 9 Feb 2009 08:28:57 -0600

Wenger, George M.

Mon, 9 Feb 2009 09:15:02 -0500

David D. Hillman

Mon, 9 Feb 2009 07:47:26 -0600

Graham Collins

Mon, 9 Feb 2009 07:39:20 -0400

John Burke

Sun, 8 Feb 2009 17:49:25 -0800

Vladimir Igoshev

Sun, 8 Feb 2009 13:55:01 -0500

Inge

Sun, 8 Feb 2009 19:04:01 +0100

Joyce Koo

Sun, 8 Feb 2009 12:34:06 -0500

Inge

Sun, 8 Feb 2009 18:13:14 +0100

P. Langeveld

Sat, 7 Feb 2009 11:03:06 +0100

David D. Hillman

Fri, 6 Feb 2009 18:02:58 -0600

Graham Collins

Fri, 6 Feb 2009 11:18:37 -0400

Thayer, Wayne

Fri, 6 Feb 2009 10:00:45 -0500

Graham Collins

Fri, 6 Feb 2009 10:18:10 -0400

Re: PCB'S minimum line width

Steve Gregory

Fri, 6 Feb 2009 08:16:53 -0600

Part solderability

Graham Collins

Fri, 6 Feb 2009 10:12:23 -0400

PCB'S minimum line width

Dennis Fritz

Wed, 18 Feb 2009 19:17:39 -0500

Re: PCB'S minimum line width

Kevin Glidden

Tue, 17 Feb 2009 09:55:13 -0500

PCB'S minimum line width

Cong He

Tue, 17 Feb 2009 10:07:56 +0800

Permissible current and voltage in PCB

Re: Permissible current and voltage in PCB

jckim(김정철)

Mon, 16 Feb 2009 11:18:18 +0900

Re: Permissible current and voltage in PCB

Jack Olson

Fri, 13 Feb 2009 09:27:26 -0600

Re: Permissible current and voltage in PCB

Jack Olson

Fri, 13 Feb 2009 08:55:10 -0600

Permissible current and voltage in PCB

jckim(김정철)

Fri, 13 Feb 2009 10:07:46 +0900

Questionnaire

Pete Houwen

Tue, 17 Feb 2009 13:35:41 -0600

Croslin, Robert

Tue, 17 Feb 2009 11:12:34 -0500

Chris Knudsen

Tue, 17 Feb 2009 09:17:43 -0500

Liu, Edwin

Tue, 17 Feb 2009 11:52:34 +0800

Robert Kondner

Mon, 16 Feb 2009 13:43:18 -0500

John Foster

Mon, 16 Feb 2009 09:17:13 -0800

Steve Gregory

Mon, 16 Feb 2009 10:33:46 -0600

Robert Kondner

Mon, 16 Feb 2009 11:06:38 -0500

Brian Ellis

Mon, 16 Feb 2009 17:21:47 +0200

James Head

Mon, 16 Feb 2009 14:31:53 -0000

Steve Smith

Mon, 16 Feb 2009 09:20:57 -0500

Karen Tellefsen

Mon, 16 Feb 2009 08:48:59 -0500

REACH legislation? How's it going?

Deac Descoteaux

Mon, 16 Feb 2009 05:47:08 -0800

Questionnaire

Liu, Edwin

Mon, 16 Feb 2009 11:54:12 +0800

Re: REACH legislation? How's it going?

Bev Christian

Tue, 3 Feb 2009 07:52:19 -0500

REACH legislation? How's it going?

Kelly Morris

Mon, 2 Feb 2009 15:10:52 -0600

Recall: [TN] Safety question

Tan Geok Ang

Thu, 19 Feb 2009 18:15:58 +0800

Recommendation for a rapid prototype PCB fabricator

Karen Tellefsen

Tue, 10 Feb 2009 08:45:49 -0500

Re: Recommendation for a rapid prototype PCB fabricator

Karen Tellefsen

Mon, 9 Feb 2009 17:02:34 -0500

Re: Recommendation for a rapid prototype PCB fabricator

Bob METCALF

Mon, 9 Feb 2009 13:55:57 -0800

Re: Recommendation for a rapid prototype PCB fabricator

Jac Kroeker

Mon, 9 Feb 2009 12:16:23 -0800

Re: Recommendation for a rapid prototype PCB fabricator

Stadem, Richard D.

Mon, 9 Feb 2009 12:21:56 -0600

Re: Recommendation for a rapid prototype PCB fabricator

Karen Tellefsen

Mon, 9 Feb 2009 12:51:05 -0500

Re: Recommendation for a rapid prototype PCB fabricator

Jac Kroeker

Mon, 9 Feb 2009 09:09:10 -0800

Re: Recommendation for a rapid prototype PCB fabricator

Karen Tellefsen

Mon, 9 Feb 2009 09:43:58 -0500

Re: Recommendation for a rapid prototype PCB fabricator

Joe Venditti

Mon, 9 Feb 2009 09:15:53 -0500

Re: Recommendation for a rapid prototype PCB fabricator

Dave Dixon

Mon, 9 Feb 2009 08:22:14 -0600

Re: Recommendation for a rapid prototype PCB fabricator

Jerry Dengler

Mon, 9 Feb 2009 09:08:35 -0500

Recommendation for a rapid prototype PCB fabricator

Karen Tellefsen

Mon, 9 Feb 2009 09:04:12 -0500

Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Bob Willis

Fri, 27 Feb 2009 18:54:16 -0000

Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Steve Gregory

Fri, 27 Feb 2009 12:27:48 -0600

Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Vladimir Igoshev

Fri, 27 Feb 2009 18:13:20 +0000

Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Joyce Koo

Fri, 27 Feb 2009 12:48:40 -0500

Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Stadem, Richard D.

Fri, 27 Feb 2009 11:11:56 -0600

Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

David D. Hillman

Fri, 27 Feb 2009 10:43:43 -0600

Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Vladimir Igoshev

Fri, 27 Feb 2009 11:33:30 -0500

Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Gumpert, Ben

Fri, 27 Feb 2009 11:28:14 -0500

Re: Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Vladimir Igoshev

Fri, 27 Feb 2009 11:07:20 -0500

Reflowing CBGA component (with high Sn balls) using Eutectic solder paste

Joe Macko

Fri, 27 Feb 2009 08:03:39 -0800

Michelle Michelotti

Wed, 4 Feb 2009 11:43:01 -0600

Repair soldermask

bob wettermann

Fri, 20 Feb 2009 08:58:50 -0800

Gabriela

Fri, 20 Feb 2009 19:51:09 +0200

Bev Christian

Fri, 20 Feb 2009 10:19:14 -0500

Ken Bloomquist

Fri, 20 Feb 2009 07:11:13 -0800

Bev Christian

Fri, 20 Feb 2009 09:51:53 -0500

Steve Gregory

Fri, 20 Feb 2009 08:44:26 -0600

Andy Price

Fri, 20 Feb 2009 09:43:40 -0500

Repair soldermask

Ioan Tempea

Fri, 20 Feb 2009 08:47:01 -0500

robotic dispensing

Steven Creswick

Mon, 9 Feb 2009 18:13:14 -0500

Inge

Mon, 9 Feb 2009 22:53:45 +0100

Inge

Mon, 9 Feb 2009 22:46:58 +0100

Robert Kondner

Mon, 9 Feb 2009 16:44:46 -0500

Inge

Mon, 9 Feb 2009 22:19:45 +0100

Steven Creswick

Mon, 9 Feb 2009 16:18:20 -0500

Ken Bloomquist

Mon, 9 Feb 2009 13:08:43 -0800

robotic dispensing

Inge

Mon, 9 Feb 2009 21:53:41 +0100

RoHS list

Stadem, Richard D.

Mon, 9 Feb 2009 09:40:14 -0600

Pete Houwen

Mon, 9 Feb 2009 08:21:50 -0600

Mike Fenner

Mon, 9 Feb 2009 11:45:03 -0000

Joyce Koo

Sun, 8 Feb 2009 22:52:14 -0500

Joyce Koo

Sun, 8 Feb 2009 22:30:06 -0500

John Burke

Sun, 8 Feb 2009 18:40:17 -0800

Bev Christian

Sun, 8 Feb 2009 17:35:30 -0500

RoHS list

Inge

Sun, 8 Feb 2009 23:09:06 +0100

Rolling MELFs

Re: Rolling MELFs

Paul Edwards

Fri, 27 Feb 2009 11:05:02 -0800

Rolling MELFs

Gervascio, Thomas L

Fri, 27 Feb 2009 13:59:19 -0500

Safety question

Bev Christian

Mon, 23 Feb 2009 09:28:43 -0500

Kevin Glidden

Thu, 19 Feb 2009 10:55:20 -0500

Pete Houwen

Thu, 19 Feb 2009 08:04:25 -0600

Randall L Bock

Thu, 19 Feb 2009 07:35:11 -0500

Stadem, Richard D.

Thu, 19 Feb 2009 06:31:16 -0600

Selective Soldering design rules

Tan Geok Ang

Thu, 19 Feb 2009 18:15:22 +0800

Safety question

Bev Christian

Wed, 18 Feb 2009 21:01:56 -0500

Jim Mosher

Mon, 23 Feb 2009 12:36:59 -0600

Sequencer Tape Suppliers?

Re: Sequencer Tape Suppliers?

Steve Gregory

Fri, 6 Feb 2009 10:42:19 -0600

Sequencer Tape Suppliers?

Steve Gregory

Fri, 6 Feb 2009 10:03:51 -0600

Soldering Alloy 260

Re: Soldering Alloy 260

Bob Willis

Thu, 19 Feb 2009 11:39:34 -0000

Re: Soldering Alloy 260

David D. Hillman

Wed, 18 Feb 2009 11:55:23 -0600

Soldering Alloy 260

Ioan Tempea

Wed, 18 Feb 2009 09:38:59 -0500

Staking Question/Help...

Kevin Glidden

Wed, 11 Feb 2009 13:59:53 -0500

Steve Gregory

Wed, 11 Feb 2009 12:52:43 -0600

Temkin, Gregg

Wed, 11 Feb 2009 07:53:10 -0800

Ian Hanna

Wed, 11 Feb 2009 10:17:08 -0500

Fox, Ian

Wed, 11 Feb 2009 15:06:42 -0000

Kevin Glidden

Wed, 11 Feb 2009 09:59:00 -0500

Kevin Glidden

Wed, 11 Feb 2009 09:55:32 -0500

keith Calhoun

Wed, 11 Feb 2009 09:47:30 -0500

Staking Question/Help...

Steve Gregory

Wed, 11 Feb 2009 08:33:35 -0600

Storage of Iag PWAs

Stadem, Richard D.

Tue, 3 Feb 2009 13:28:27 -0600

Gary Camac

Tue, 3 Feb 2009 12:49:20 -0600

Dennis Fritz

Tue, 3 Feb 2009 11:12:57 -0500

Technical Reference for oceanic shipping

Whittaker, Dewey (EHCOE)

Tue, 3 Feb 2009 07:14:58 -0700

Storage of Iag PWAs

Gary Camac

Mon, 2 Feb 2009 13:24:36 -0600

Con Mọt Sách

Wed, 11 Feb 2009 21:25:00 +0700

Kevin Glidden

Tue, 10 Feb 2009 14:14:22 -0500

Kevin Glidden

Tue, 10 Feb 2009 14:01:40 -0500

Technical Reference for oceanic shipping

Mike Sewell

Tue, 10 Feb 2009 11:16:18 -0600

Con Mọt Sách

Mon, 9 Feb 2009 22:56:25 +0700

Typical Cost difference between IPC-6012 Class 2 and Cla ss 3 boards

Re: Typical Cost difference between IPC-6012 Class 2 and Cla ss 3 boards

Stewart, Dougal

Thu, 5 Feb 2009 17:43:43 -0000

Typical Cost difference between IPC-6012 Class 2 and Class 3 boards

Re: Typical Cost difference between IPC-6012 Class 2 and Class 3 boards

ROGER STOOPS

Thu, 5 Feb 2009 16:46:40 -0800

Re: Typical Cost difference between IPC-6012 Class 2 and Class 3 boards

John Foster

Thu, 5 Feb 2009 09:04:00 -0800

Typical Cost difference between IPC-6012 Class 2 and Class 3 boards

Bray, Anita (GE EntSol, Security)

Thu, 5 Feb 2009 11:42:37 -0500

Ultrasonic cleaner for PCB

Stadem, Richard D.

Mon, 23 Feb 2009 08:36:11 -0600

Stadem, Richard D.

Thu, 19 Feb 2009 08:57:57 -0600

Stadem, Richard D.

Thu, 19 Feb 2009 08:54:45 -0600

Leif Erik Laerum

Thu, 19 Feb 2009 07:55:32 -0600

Ultrasonic cleaner for PCB

Stadem, Richard D.

Thu, 19 Feb 2009 06:13:19 -0600

Ray Kong

Wed, 18 Feb 2009 15:19:06 -0800

UMICORE PASTE

Re: UMICORE PASTE

John Goulet

Mon, 2 Feb 2009 01:40:39 +0000

Vapor degreaser help

Ted Tontis

Wed, 4 Feb 2009 12:02:19 -0600

Vapor Phase Soldering

Whittaker, Dewey (EHCOE)

Tue, 3 Feb 2009 07:10:03 -0700

Brian Ellis

Tue, 3 Feb 2009 14:52:30 +0200

P. Langeveld

Tue, 3 Feb 2009 11:07:42 +0100

Hernefjord Ingemar

Mon, 2 Feb 2009 16:00:30 +0100

Louis Hart

Mon, 2 Feb 2009 09:20:16 -0500

Hernefjord Ingemar

Mon, 2 Feb 2009 09:23:02 +0100

Hernefjord Ingemar

Mon, 2 Feb 2009 09:07:41 +0100

Virus Hoax

Inge

Wed, 18 Feb 2009 22:30:44 +0100

Croslin, Robert

Wed, 18 Feb 2009 08:41:44 -0500

Tue, 17 Feb 2009 17:59:12 EST

Ken Bloomquist

Tue, 17 Feb 2009 14:49:45 -0800

Phil Nutting

Tue, 17 Feb 2009 17:18:16 -0500

Weird one - bismuth in overmold

Inge

Tue, 17 Feb 2009 22:34:00 +0100

Virus Hoax

Robert Kondner

Tue, 17 Feb 2009 15:49:00 -0500

Stadem, Richard D.

Fri, 27 Feb 2009 10:40:42 -0600

Ian Hanna

Fri, 27 Feb 2009 10:45:24 -0500

Ken Bloomquist

Fri, 27 Feb 2009 07:23:58 -0800

Vladimir Igoshev

Thu, 26 Feb 2009 17:55:34 +0000

David D. Hillman

Thu, 26 Feb 2009 11:41:56 -0600

Vladimir Igoshev

Thu, 26 Feb 2009 17:37:01 +0000

Bev Christian

Thu, 26 Feb 2009 12:30:34 -0500

David D. Hillman

Thu, 26 Feb 2009 11:23:37 -0600

Vladimir Igoshev

Thu, 26 Feb 2009 17:20:10 +0000

Bev Christian

Thu, 26 Feb 2009 11:59:20 -0500

Weird one - bismuth in overmold

Vladimir Igoshev

Thu, 26 Feb 2009 16:05:21 +0000

Bev Christian

Thu, 26 Feb 2009 10:51:31 -0500

Where's the JCAA-JG-PP page?

Ioan Tempea

Wed, 18 Feb 2009 08:52:22 -0500

Lee Whiteman

Wed, 18 Feb 2009 08:40:47 -0500

David D. Hillman

Wed, 18 Feb 2009 07:36:22 -0600

Ioan Tempea

Wed, 18 Feb 2009 08:32:41 -0500

Where's the JCAA-JG-PP page?

Lee Whiteman

Wed, 18 Feb 2009 08:26:59 -0500

Ioan Tempea

Wed, 18 Feb 2009 08:18:17 -0500

Wire Bonding Dummy Parts

Re: Wire Bonding Dummy Parts

Steven Creswick

Fri, 27 Feb 2009 10:49:14 -0500

Re: Wire Bonding Dummy Parts

Thayer, Wayne

Thu, 26 Feb 2009 12:40:01 -0500

Re: Wire Bonding Dummy Parts

Scott Rougeux

Thu, 26 Feb 2009 09:21:06 -0600

Wire Bonding Dummy Parts

bob wettermann

Thu, 26 Feb 2009 07:03:20 -0800

Workmanship criteria for ipass connector

Re: Workmanship criteria for ipass connector

John Goulet

Sun, 15 Feb 2009 04:12:37 +0000

Re: Workmanship criteria for ipass connector

Guy Ramsey

Wed, 11 Feb 2009 16:03:43 -0500

Workmanship criteria for ipass connector

Rudolph yu

Wed, 11 Feb 2009 07:22:51 +0000

[NTC] Cool New Google Tool

Re: [NTC] Cool New Google Tool

Pete Houwen

Wed, 18 Feb 2009 08:59:54 -0600

[NTC] Cool New Google Tool

Ken Bloomquist

Wed, 11 Feb 2009 12:39:39 -0800

[NTC] Repair soldermask

Re: [NTC] Repair soldermask

Ken Bloomquist

Fri, 20 Feb 2009 07:57:15 -0800

[TC] [IPC-600-6012] Microvias

Re: [TC] [IPC-600-6012] Microvias

Stewart, Dougal

Mon, 23 Feb 2009 14:47:15 -0000

Re: [TC] [IPC-600-6012] Microvias

Whittaker, Dewey (EHCOE)

Mon, 23 Feb 2009 07:39:03 -0700

[tinwhiskers] - RoHS & BGAs!!!

Re: [tinwhiskers] - RoHS & BGAs!!!

Werner engelmaier

Fri, 13 Feb 2009 13:26:36 -0500

Re: [tinwhiskers] - RoHS & BGAs!!!

Inge

Fri, 13 Feb 2009 19:19:20 +0100

Re: [tinwhiskers] - RoHS & BGAs!!!

Werner engelmaier

Fri, 13 Feb 2009 11:52:47 -0500

[tinwhiskers] Re: - RoHS & BGAs!!!

Stadem, Richard D.

Mon, 16 Feb 2009 09:00:53 -0600

Werner engelmaier

Fri, 13 Feb 2009 16:14:36 -0500

John Burke

Fri, 13 Feb 2009 12:49:56 -0800

Ian Hanna

Fri, 13 Feb 2009 15:50:12 -0500

Werner engelmaier

Fri, 13 Feb 2009 15:39:20 -0500

John Burke

Fri, 13 Feb 2009 12:34:21 -0800

Werner engelmaier

Fri, 13 Feb 2009 15:19:19 -0500

John Burke

Fri, 13 Feb 2009 11:26:51 -0800

Werner engelmaier

Fri, 13 Feb 2009 13:24:17 -0500